Nokia BH-902 Bedienungsanleitung

Nokia Bluetooth Headset BH-90 2 User Guide 9203798 Issue 1 EN[...]

DECLARATION OF CONF ORMITY Hereby, NOKIA CORPORATION declares that this HS-76W product is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. A copy of the Declaration of Conformity can be found at http://www.nokia.com/phones/ declaration_of_conformity/. © 2007 Nokia. All rights reserved. Reproductio[...]

The contents of this document are provided "as is". Except as required by applicable law, no warranties of any kind, either express or implied, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose, are made in relation to the accuracy, reliability or contents of this document. Nokia[...]

Contents 4 Contents 1. Introduction ..................................... ......................... 6 Bluetooth wireless technology ........................ ..................... .................. 7 2. Get started ........................................ ......................... 9 Overview .................. ..................... ................[...]

Contents 5 4. Battery information ................................................ 26 Care and maintenance ............................ .................... 28[...]

Introduction 6 1. Introduction With the Nokia Bluetooth He adset BH-902 you can make and receive calls while on th e move and use your mobile device hands free. You can use the headset with compatible devices that support Bluet ooth wireless technology. Read this user guide carefully before using the headset. Also read the user guide for your mobil[...]

Introduction 7 ■ Bluetooth wireless technology Bluetooth wireless technology allows you to connect compatible devices without cables. A Bluetooth connection does not require that the mobile device and the headset be in line of sight, but the maximum distance between the devices is 10 meters (30 feet). The closer the mobile device and the headset [...]

Introduction 8 (PBAP) 1.0. Check with the manufacturers of other devices to determine their compatibility with this device. There may be restrictions on using Bluetooth technology in some locations. Check with your local authorities or service provider.[...]

Get started 9 2. Get started ■ Overview The headset contains the following parts: charger connector (1), volume down key (2), ans wer/end key (3), volume up key (4), earloop (5), display (6), earpiece (7), power key (8), and microphone (9). Before you can start us ing the headset, you must charge the battery and pair the headset w ith a compatibl[...]

Get started 10 Parts of the headset are magnetic. Metallic materials may be attracted to the headset. Do not place credit cards or other magnetic storage media near the headset, because information stored o n them may be erased. ■ Chargers Check the model number of any charger before using it with this headset. The headset is intended for use wit[...]

Get started 11 ■ Charge the battery The headset has an internal, nonremo vable, rechargeable battery. Do not attempt to remove th e battery from the headset, as you ma y damage the headset. 1. Connect the charger to a wall outlet. 2. Connect the charger cable to the charger c onnector on the headset. When th e charging starts, Chargi ng is briefl[...]

Get started 12 Bluetooth devices, usage s ettings, usage styles, and environments. When battery power falls low, the headset beeps about every 5 minutes, and Battery low is displayed. Recharge the battery. ■ Switch on or of f To switch on, press and hold the power key until the head set beeps and the Nokia logo is di splayed. If the headset has b[...]

Get started 13 2. If the headset has n ot been previously paired with a device, switch on the heads et. The headset enters th e pairing mode. If the headset has been prev iously paired with another device, switch off the headset, and press and hold the power key until text about pairing is displayed. You can also start pairing using the Pairing fun[...]

Get started 14 Disconnect the headset To disconnect the headset from your mobile device, use the Connection > Device list function described in “Menu functions,” p. 21. Alternatively, switch off the headset, or disconnect it in the Bluetooth menu of your device. You do not need to delete pairing with the headset to disconnect it. Reconnect t[...]

Get started 15 ■ Display When the headset is on and it is not used for about 10 seconds, the d isplay enters the power saving mode. In this mode the display turns off for about 5 seconds and turns on for about 1 second at regular intervals. To activate the display when it is in the power saving mode, briefly press the answer/end key or either vol[...]

Get started 16 A call is active and an other call is on ho ld. You have missed calls. The microphone is muted (during a call). There are unread text or multimedia messages in your mobile device. The ic on is shown only when the headset is connected to a compat ible Nokia device. The battery is fully charged. The battery charge is low. You have hidd[...]

Basic use 17 3. Basic use ■ Place the headset over the e ar The headset is provided with an earloop that you can use for a better fit on your ear. Peel off the protective sheet from the earpiece. To use the headset with the earloop, slide the earloop over your ear (1), and gently plug the earpiece into your ear. Push or pull the earloop to set it[...]

Basic use 18 To use the headset on the left ear, rotate the earloop so that the loop is to the left of the Nokia logo (3). To use the headset w ithout the earloop, detach the earloop by gently pulling it from the small opening at the back of the headset, and plug the headset into your ear. To attach the earloop, carefully inse rt it into the openin[...]

Basic use 19 When you do not keep the headset on your ear, you can attach it to your clothing or belt using the clip or carry it on the strap around your neck. To fix the headset to the clip or strap, insert the headset int o the catch (1), and gently push it downwards (2) until it locks into place (3). To detach the headset, slide it out through t[...]

Basic use 20 If your device supports last number redialing with the headset, press the answer/end key twice while no call is in progress. If your device supports voice di aling with the headset, press and hold the ans wer/end key when no call is in progress, and proceed as described in the user guide for your device. To answer or end a call, press [...]

Basic use 21 switch between the active call and the call on hold, press and hold the answer/end key. To end the active call and make the call on hold active , press the answer/en d key. ■ Menu functions The headset has a menu facili ty where you can view recent calls, manage the paired devices, and change the headset settings. Move within the men[...]

Basic use 22 several times depending on the current menu level; or wait until the display turns off to save power. View recent calls To view recent calls, select Recent calls and the desired submenu. You can view the 10 most recent dialed, received, and missed calls. When you connect the headset to your mobile device, the call information is copied[...]

Basic use 23 To view the currently paire d devices, select De vice list . The currently connected device is in dicated by a filled circle, and the device that is not co nnected to the headset is indicat ed by an empty circle. To connect the headset to a device or disconnect the headset from it, scroll to the device, and press the answer/end key. Ch[...]

Basic use 24 To select the lang uage for the texts s hown on the headset display, select Language . Scroll to the desired language, and press the answer/end key twice. The language is updated from the connected Nokia device if the device provides the language setting. To set the display brightness, sele ct Bright ness . Scroll t o the desired level[...]

Basic use 25 ■ Clear settings or reset To restore the original settings of the headset, use the Setup > Res et function described in “Menu functions,” p. 21. Alternatively, switch off the headset, press and hold the power key and answer/end key, and press the answer/ end key to confirm the operation. To reset the headset if it stops functi[...]

Battery information 26 4. Battery information Your device is powered by a rechargeable battery. The battery can be charged and discharged hundreds of times, but it will eventually wear out. Recharge your battery only with Nokia approved chargers designated for this device. Unplug the charger from the electrical plug and the device when not in use. [...]

Battery information 27 Do not dispose of batteries in a fire as they may explode. Batteries may also explode if damaged.[...]

Care and maintena nce 28 Care and maintenance Your device is a product of superior design and craftsmanship and should be treated with care. The following suggestions will help you protect your warranty coverag e. • Keep the device dry. Precipitation, humidity, and all types of liquids or moisture can cont ain minerals that will corrode electroni[...]

Care and maintenance 29 • Do not attempt to open th e device. • Do not drop, knock, or shake the device. Rough handling can break internal circuit boards and fine mechanics. • Do not use harsh chemicals, cleaning solvents, or strong detergents to clean the device. • Do not paint the device. Paint can clog the moving parts and prevent proper[...]

Care and maintena nce 30 waste disposal and to promot e the sustainable reuse of material resources. Collection informat ion is available from the product retailer, local wa ste authorities, nati onal producer responsibility organizations, or your local Nokia representative. For more information, see product Eco-Declaration or country-specific info[...]