NordicTrack NTL22840 Bedienungsanleitung

USER'S MANUAL CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. Serial Number Decal Model No. NTL22840 Serial No. Find the serial number in the location shown below. Write the serial number in the space above for reference. Visit our website at www .nordictrack.co[...]

T ABLE OF CONTENTS IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 ASSEMBLY . . . . .[...]

1. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 2. Use the treadmill only as described in this manual. 3. Place the treadmill on a level surface, with at least eight feet of clearance behind it and two feet on each side. Do not place the treadmill on any su[...]

21. When folding or moving the treadmill, make sure that the storage latch is fully closed. 22. When using iFIT.com CDs and videos, an electronic “chirping” sound will alert you when the speed and/or incline of the treadmill is about to change. Always listen for the “chirp” and be prepared for speed and/or in- cline changes. In some instanc[...]

Thank you for selecting the revolutionary NordicTrack ® 7600 R treadmill. The 7600 R treadmill offers an im- pressive array of features to make your home work- outs more enjoyable and effective. And w hen you’ re not exercising, the unique 7600 R tre admill can be folded up, requiring less than half the floor space of other treadmills. For your [...]

ASSEMBL Y Assembly requires two people. Set the treadmill in a cleared area and remove all packing materials. Do not dispose of the packing materials until assembly is completed. Assembly requires the included allen wrench and your own flat-bladed screwdriver , wire cutters , and adjustable wrench . Note: The underside of the treadmill walking belt[...]

7. Make sure that all parts are properly tightened before you use the treadmill. Keep the included allen wrench in a secure place. The allen wrench is used to adjust the walking belt (see page 29). To protect the floor or carpet from damage, place a mat under the treadmill. 7 5. Insert two 4 1/2” Bolts (104) with Star Washers (106) into the right[...]

8 HOW TO PUT ON THE CHEST PULSE SENSOR The chest pulse sensor consists of two components: the chest strap and the sensor unit (see the drawing below ). Insert the tab on one end of the chest strap into one end of the sensor unit, as shown in the inset draw- ing. Press the end of the sensor unit under the buckle on the chest strap. The tab should be[...]

9 OPERA TION AND ADJUSTMENT THE PERFORMANT LUBE TM WALKING BELT Your treadmill features a walking belt coated with PERFORMANT LUBE TM , a high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to the walking belt or the walking plat- form. Such substances will deteriorate the walking belt and cause excessive wear. HOW[...]

10 FEATURES OF THE CONSOLE The advanced console offers a selection of fe atures designed to help you get the most from your exercise. When the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the t ouch of a button. As you exercise, the console will display continuous exercise feedback. You can even[...]

11 GETTING STARTED Attach the clip to the waistband of your clothes. Stand on the foot rails of the treadmill. Find the clip attached to the key and slide the clip onto the waistband of your clothes. Next, in- sert the key into the console. Test the clip by carefully taking a few steps backward until the key is pulled from the console. If the key i[...]

12 HOW TO USE THE MANUAL MODE Insert the key fully into the console. See GETTING STARTED on page 11. Select the manual mode. When the key is inserted, the manual mode will automatically be selected. If a program has been selected, press the Select Goal b utt on re pea ted ly until the words “MANUAL MODE” appear in the main display. Press the St[...]

13 Distance/Laps —The center section of the main display shows the distance that you have walked and t he number of 1/4-mile laps you have completed. The display will change from one number to the other every few seconds; the Laps indicator will light when the number of laps is shown. Calories/Pulse — When you are not using the handgrip pulse s[...]

14 HOW TO USE PRESET PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 11. Select the desired preset program. The console offers twenty-six preset programs— nine programs that focus on weight loss, nine pro- grams designed for aerobic exercise, and eight programs for high-performance conditioning. When the key is inserte[...]

15 If the speed or incline setting is too high or too low during the program, you can manually override the setting by pressing the Speed or Incline but- tons on the console. Every few times one of the Speed buttons is pressed, an additional indi cator will light or darken in the Current Segment col umn. (If any of the columns to the right of the C[...]

16 HOW TO CREATE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 11. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal b utt on repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- play. Next, pr[...]

17 HOW TO USE CUSTOM PROGRAMS Insert the key fully into the console. See GETTING STARTED on page 11. Select one of the custom programs. When the key is inserted, the manual mode will be selected. To select a custom program, first press the Select Goal b utt on repeatedly until the words “CUSTOM PROGRAM” appear in the main dis- pl ay . Next, pre[...]

18 HOW TO USE HEART RATE PROGRAMS Heart rate prog rams automatically adjust the speed and incline of the treadmill to keep your heart rate near a target level while you exercise. Note: You must wear the chest pulse sensor (see page 8) to use the heart rate programs. Follow the steps below to use a heart rate program. Put on the chest pulse sensor ([...]

19 Press the Start button or the Speed + button to start the program. A moment after the button is pressed, the tread- mill will automatically adjust to the first speed and incline settings of the program. Hold the hand rails and begin walking. Each heart rate program is divided into several time segm ents of different lengths. (The mai n display s[...]

20 HOW TO CONNECT THE TREADMILL TO YOUR CD PLAYER, VCR, OR COMPUTER To use iFit.com CDs , the treadmill must be connected to your portable CD player, portable stereo, home stereo, or computer with CD player. See this page and page 21 for connecting instructions. To use iFIT.com videocassettes , the treadmill must be connected to your VCR. See page [...]

21 HOW TO CONNECT YOUR HOME STEREO Note: If your stereo has an unused LINE OUT jack, see instruction A below. If the LINE OUT jack is being used, see instruction B. A. Plug one end of the audio cable into the jack on the front of the treadmill near the power cord. Plug the other end of the cable into the included adapter. Plug the adapter into the [...]

22 HOW TO CONNECT YOUR VCR Note: If your VCR has an unused AUDIO OUT jack, see instruction A below. If the AUDIO OUT jack is being used, see instruction B. If you have a TV with a built-in VCR, see instruction B. If your VCR is connected to your home stereo, see HOW TO CONNECT YOUR HOME STEREO on page 21. A. Plug one end of the audio cable into the[...]

23 If the speed or incline settings are too high or too low, you can manually override the settings at any time by pressing the Speed or Incline buttons on the console. However, when the next “chirp” is heard, the speed and/or incline will change to the next settings of the CD or video program. To stop the walking belt at any time, press the St[...]

24 HOW TO USE PROGRAMS DIRECTLY FROM OUR WEB SITE Our Web site at www.iFIT.com allows you to access basic programs, audio programs, and video programs directly from the internet. Additional options are s oon to be available. See www.iFIT.com for details. To use programs from our Web site, the treadmill must be connected to your home computer. See H[...]

25 THE INFORMATION MODE/DEMO MODE The console features an information mode that keeps track of the total number of hours that the treadmill has been operated and the total number of miles that the walking belt has moved. The information mode also allows you to switch the console from miles per hour to kilometers per hour. In addition, the informati[...]

HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the lowest position. If this is not done, the treadmill may be per- manently damaged. Remove the key and unplug the power cord. CAUTION: You must be able to safely lift 45 pounds (20 kg) to raise, lower, or move the treadmil[...]

27 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Pull the latch knob to the left and hold it. Pivot the treadmill down until the plate is past the pin on the latch knob. Slowly release the latch knob. 2. Hold the treadmill firmly with both hands, and lower the treadmill to the floor. Do not[...]

28 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please call our Customer Service Department toll- free at 1-888-825-2588, Monday through Friday, 6 a.m. until 6 p.m. Mountain Time (excluding holidays). PROBLEM: The powe[...]

29 PROBLEM: The walking belt slows when walked on SOLUTION: a. Use only a single-outlet surge suppressor that meets all of the specifications described on page 9. b. If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- come damaged. Remove the key and UNPLUG THE POWER CORD . Using the allen wrench,[...]

30 PROBLEM: The incline of the treadmill does not change correctly or does not change when iFIT.com CDs and videos are played SOLUTION: a. With the key in the console, press one of the Incline buttons. While the incline is changing, re- move the key. After a few seconds, re-insert the key. The treadmill will automatically rise to the maximum inclin[...]

31 CONDITIONING GUIDELINES The following guidelines will help you to plan your ex- ercise program. For more detailed exercise informa- tion, obtain a reputable book or consult your physician. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, the key to achieving the desired results is to exercise with [...]

32 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch—never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible. Hold for 15 counts, then [...]

33 NOTES[...]

P ART LIST—Model No. NTL22840 R1203A To locate the parts listed below, see the EXPLODED DRAWING attached in the center of this manual. Key No. Qty. Description Key No. Qty. Description 1 1 Allen Wrench 2 2 Rear Wheel Bolt 3 1 Rear Endcap (Left) 4 2 Roller Star Washer 5 2 Rear Roller Adj. Bolt 6 2 Rear Wheel 7 4 U-nut 8 8 Endcap Bolt 9 1 Roller Gu[...]

Key No. Qty. Description Key No. Qty. Description 111 1 Latch Knob Sleeve 112 1 Pulse Receiver 113 1 Latch Knob 114* 1 Latch Assembly 115 1 Left Cup Holder 116 1 Right Cup Holder 117 1 Right Fan Housing 118 2 Upright Endcap 119 2 Wire Harness 120 2 Hood Mount (Side) 121 4 8” Cable Tie 122 1 iFIT.com Audio Cable 123 1 Jack 124 1 Releaseable Tie 12[...]

48 68 67 73 72 74 55 42 51 46 44 39 40 41 42 43 42 47 57 33 32 52 93 93 43 126 48 50 42 51 70 93 93 37 36 93 38* 49 120 48 48 48 120 66 71 86 27 53 146 34 35 146 34 35 145 20 76 77 29 28 78 28 130 130 45 54 93 93 87 65 64 144 31 30 1 15 18 18 61 125 87 137 22 23 25 14 9 6 3 8 24 2 42 8 8 13 12 13 12 13 12 145 136 21 21 5 4 128 131 2 1 1 6 10 8 42 1[...]

82 81 124 93 75 121 98 97 97 95 143 143 95 92 92 92 91 90 122 123 96 96 96 100 102 103 101 42 127 127 59 59 1 18 99 1 13 1 1 1 1 10 107 108 109 1 14* 1 19 106 104 106 104 17 17 1 18 19 56 69 135 135 133 129 1 12 134 147 103 102 100 101 42 94 93 93 93 139 138 7 139 138 85 85 86 83 142 87 87 142 7 80 73 105 58 105 1 17 87 87 88 88 87 87 88 87 88 87 8[...]

Part No. 207098 R1203A Printed in USA © 2003 ICON Health & Fitness, Inc. LIMITED W ARRANTY WHAT IS COVERED—The entire NordicTrack ® 7600 R treadmill (“Product”) is warranted to be free of all defects in ma- terial and workmanship. WHO IS COVERED—The original purchaser or any person receiving the Product as a gift from the original pur[...]