Oki 6020E Bedienungsanleitung

OkiLAN 6020e ® Pocket Print Server User ’ s Guide High Performance 10/100 Base-T Ethernet Network Print Server[...]

ii Copyright and T rademark Information OKI OkiLAN 6020e User ’ s Guide Every effort has been made to ensure that the information in this document is complete, accurate, and up-to-date. Oki Data assumes no responsibility for the results of errors beyond its control. Oki Data also cannot guarantee that changes in products made by other manufacture[...]

iii Organization and Contents OKI OkiLAN 6020e User ’ s Guide Organization This manual has been divided into eight sections. Section I contains and installation instructions for the OkiLAN 6020e print server . Section II contains information about management features, an extremely valuable set of OkiLAN 6020e management tools for network administ[...]

iv Organization and Contents OKI OkiLAN 6020e User ’ s Guide Section IV : TCP/IP .................................................. IV -1 Chapter 1: Introduction ................................................ IV -5 Chapter 2: Configuring the OkiLAN 6020e ................ IV -7 Chapter 3: TCP/IP Configuration and Printing .......... IV -14 Chapt[...]

v Network Operating Systems OKI OkiLAN 6020e User ’ s Guide Network Operating Systems Overview OkiLAN 6020e simultaneously supports several network protocols in various combinations. Below is a list of supported network protocols accompanied with NOS/OS requirements. TCP/IP and Windows NT TCP/IP , FTP and Remote LPD protocols. Simple Network Mana[...]

vi T echnical Support OKI OkiLAN 6020e User ’ s Guide Service Information Note: This information is valid for the United States and Canada only . Oki Data On Line V isit the OKI DA T A W eb Site at http://www .okidata.com for the latest information on: • Software drivers • Product guides • Customer support • Corporate information • Deal[...]

vii T echnical Support OKI OkiLAN 6020e User ’ s Guide Oki Data Customer Support Representatives Agents are available 24 hours a day , 7 days a week at 1-800-OKI-DA T A (1-800-654-3282). Please be sure that you are calling from a telephone close to your printer , so you can describe your problem accurately . Our customer service representatives a[...]

viii T echnical Support OKI OkiLAN 6020e User ’ s Guide Brazil Oki Data do Brasil, Ltda. T el: 0800-11-5577 Fax: 55-11-5012-0267 Mexico Oki Data de Mexico, S.A. de C.V . T el: 525-263-8780 Fax: 525-250-3501[...]

ix T echnical Support OKI OkiLAN 6020e User ’ s Guide When you call T echnical Support, the following information will help us answer your questions more quickly and accurately . Please be able to identify the following: • OkiLAN model number • Serial number • Configuration sheet settings • T ype of network cable connected to the OkiLAN 6[...]

x T echnical Support OKI OkiLAN 6020e User ’ s Guide[...]

Hardware Installation Section I: Hardware Installation[...]

I - 2 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide[...]

Hardware Installation I - 3 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide In This Section Powering On the OkiLAN 6020e ................ I-7 Printing a Configuration Sheet ..................... I-8[...]

I - 4 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide[...]

Hardware Installation I - 5 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide The OkiLAN 6020e Pocket Print Server enables Ethernet network users to connect to a printer with a bidirectional parallel port. The OkiLAN 6020e can be made to work with any Centronics or IEEE-1284 paral- lel interface printer that includes a resident em[...]

I - 6 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide 3. Secure the OkiLAN 6020e with the wire clips on the printer ’ s connector . 4. Plug the power adapter wire into the power jack on the OkiLAN 6020e. Then plug the power adapter into a 120 V AC wall outlet. Please note that some countries may r equir e a differ ent adapter [...]

Hardware Installation I - 7 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide 5. Attach the 10/100Base-T UTP cable to the recep- tacle on the back of the OkiLAN 6020e. Attach the other end of the cable to the Network. Powering On the OkiLAN 6020e T urn printer power on. The red and green indicators on the OkiLAN 6020e will blink d[...]

I - 8 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide Note: If the red and green indicators do not display as indicated above, see Hardware T roubleshooting at the end of this section. Printing a Configuration Sheet T o print configuration information, press the T est button on the front of the OkiLAN 6020e. Y ou can also print [...]

Hardware Installation I - 9 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide Installing the OkiLAN 6020e Software Utilities Introduction Y our OkiLAN 6020e Pocket Print Server comes with two types of software utilities: OkiV iew 32 and OkiNet Utilities. OkiV iew 32 OkiV iew 32 is a general purpose utility for configuring and mont[...]

I - 10 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide Installing the OkiLAN Utilities Software in Windows 1. Insert the OkiLAN CD into your CD-ROM drive. 2. The Setup screen appears automatically (if it doesn’t, click Start ® Run, then enter D:setup, if “D” is your CD-ROM drive). 3. Select the utility group for the netw[...]

Hardware Installation I - 11 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide OkiNet for the Apple ® MacIntosh ® Utility Note: The OkiLAN Utilities CD is designed for more than one type of OkiLAN print server and includes features that do not apply to the OkiLAN 6020e. Specifi- cally , Apple EtherT alk is supported by other OKI[...]

I - 12 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide Solution a ) Unplug the OkiLAN 6020e power adapter from the wall outlet. Remove the network cable. Plug the network cable back in until you hear a positive click. Check the other end of the cable in the same manner . Plug the OkiLAN 6020e back in. If it does not detect a cab[...]

Hardware Installation I - 13 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide LED Display Green indicator is flashing slowly (1 timer/sec); the OkiLAN 6020e is trying to print a job. Problem The printer is malfunctioning or does not have sufficient paper or toner . Solution V erify that the printer is not showing any errors and h[...]

I - 14 Section I - Hardware Installation OKI OkiLAN 6020e User ’ s Guide LED Display The red and green indicators are alternately flashing for longer than two minutes. Problem The OkiLAN 6020e is in firmware download mode. This means it is waiting for new firmware to be sent before it will continue functioning normally . Solution If the OkiLAN 60[...]

Advanced Management Section II: Advanced Management Features[...]

II - 2 Section 2 - Advanced Management Featur es OKI OkiLAN 6020e User ’ s Guide In This Section Chapter 1 SNMP ...................................................... II-3 Overview ....................................................... II-3 Private MIB ................................................... II-3 T raps ..............................[...]

II - 3 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6020e User ’ s Guide Advanced Management Chapter 1 Simple Network Management Protocol (SNMP) Overview Simple Network Management Protocol (SNMP) provides network administrators with the ability to communicate management functions between an SNMP manager and an SNMP agent. An SNMP manager is a user pro[...]

II - 4 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6020e User ’ s Guide Note : If you attempt a reset while a job is printing, the job may not print successfully . Certain variables are critical, that is, they change a fundamental operating parameter of the OkiLAN 6020e. These variables are saved by the OkiLAN 6020e but are not actually used until it[...]

II - 5 Section 2 - Chapter 1 - SNMP OKI OkiLAN 6020e User ’ s Guide Advanced Management In order to receive OkiNet Alert traps, the OkiLAN 6020e must have bi-directional status enabled (it is disabled by default). Extended Status can be enabled through the OkiLAN 6020e Configuration utility (telnet) from the Configur e Port option. Y ou can also [...]

II - 6 Section 2 - Chapter 2 - HP JetAdmin Support OKI OkiLAN 6020e User ’ s Guide Chapter 2 HP JetAdmin Support Overview This section contains instructions and information on how to configure and obtain diagnostic information from your OkiLAN 6020e using the Hewlett-Packard JetAdmin software. Software Requirements • JetAdmin 2.4, 2.5, or 3.02 [...]

II - 7 Section 2 - Chapter 2 - HP JetAdmin Support OKI OkiLAN 6020e User’ s Guide Advanced Management 7. Select the desired queues from the list of A vailable Queues to be added into service. Click the Service button to move the selection to the Serviced Queues column. When all queues have been added, click OK . 8. Click OK again to return to the[...]

II - 8 Section 2 - Chapter 3 - HP W eb JetAdmin Support OKI OkiLAN 6020e User’ s Guide Chapter 3 HP Web JetAdmin Support Overview This section contains instructions and information on how to configure, install, and obtain diagnostic information from your OkiLAN 6020e using the Hewlett-Packard W eb JetAdmin software. Software Requirements • W eb[...]

II - 9 Section 2 - Chapter 3 - HP W eb JetAdmin Support OKI OkiLAN 6020e User’ s Guide Advanced Management 4. On the Install Printer Page 1 page, select an NT domain from the pull-down menu. Enter the user name and password of a domain user with sufficient rights to create a printer and click the Continue button. 5. On the Install Printer Page 2 [...]

II - 10 Section 2 - Chapter 4 - OkiLAN 6020e W eb Configuration OKI OkiLAN 6020e User ’ s Guide Chapter 4 OkiLAN 6020e Web Configuration Overview This section contains instructions and information on how to configure and manage your OkiLAN 6020e using a standard W eb browser . Software Requirements TCP/IP Protocol Netscape Navigator 2.0 or greate[...]

II - 11 Section 2 - Chapter 4 - OkiLAN 6020e W eb Configuration OKI OkiLAN 6020e User ’ s Guide Advanced Management Note : As a layer of security , the TCP port number that the device uses to communicate with browsers, called the HTTP port , can be modified from a default of 80. If the port is modified, the HTTP address put in the browser must in[...]

II - 12 Section 2 - Chapter 5 - Additional Management Featur es OKI OkiLAN 6020e User ’ s Guide Configuration 1. Select the Login as Admin link under the Configuration menu. 2. On the Enter Network Password screen, enter the User name and Passwor d . The default administrator User name is admin . The default administrator Password is OkiLAN —no[...]

II - 13 Section 2 - Chapter 4 - OkiLAN 6020e W eb Configuration OKI OkiLAN 6020e User ’ s Guide Advanced Management 5. A Request Results page will appear indicating one of the following: • Configuration Successfully Set : The values have been successfully saved to the print server . Go to another page to continue configuration or exit the brows[...]

II - 14 Section 2 - Chapter 5 - Additional Management Featur es OKI OkiLAN 6020e User ’ s Guide * The following values are currently only configurable through the Web browser interface: Web Admin Configuration Under the Configuration menu, select the Admin(W eb) link. • Admin Name - The name used to access full configuration privileges. The def[...]

II - 15 Section 2 - Chapter 4 - OkiLAN 6020e W eb Configuration OKI OkiLAN 6020e User ’ s Guide Advanced Management Status The home page for the print server shows general status information including the status of all printers currently attached. For more detailed status information, select the V iew Cnfg Sheet link under the Status menu. This w[...]

II - 16 Section 2 - Chapter 5 - Additional Management Featur es OKI OkiLAN 6020e User ’ s Guide Reset Reset Reset the print server by selecting the Reset link under the Reset menu. A message will appear asking you to confirm the reset. Restore Select Restore Defaults under the Reset menu to restore selected protocols to factory defaults. Select t[...]

II - 17 Section 2 - Chapter 4 - OkiLAN 6020e W eb Configuration OKI OkiLAN 6020e User ’ s Guide Advanced Management T roubleshooting Server Connection • The print server only supports two simultaneous HTTP connections. If your browser fails to connect to the print server , the browser may be trying to open more than two connections. Please refe[...]

II - 18 Section 2 - Chapter 5 - Additional Management Featur es OKI OkiLAN 6020e User ’ s Guide Chapter 5 Additional Management Features OkiNet Alert OKI OkiNet Alert enterprise management utility allows administrators to proactively manage printers by being immediately alerted to printing problems before they are encountered by users. This remot[...]

II - 19 Section 2 - Chapter 5 - Additional Management Featur es OKI OkiLAN 6020e User ’ s Guide Advanced Management OkiNet for NDS OkiNet for NDS allows administrators to create and manage OKI print server objects in the NDS tree. OkiNet for NDS integrates into Novell’ s NetW are Administrator , NetW areAdmin. For more information, see OkiNet f[...]

II - 20 Section 2 - Chapter 5 - Additional Management Featur es OKI OkiLAN 6020e User’ s Guide[...]

NetW are Section III: NetW are[...]

III - 2 Section 3 - NetW are OKI OkiLAN 6020e User’s Guide In This Section Chapter 1 Introduction ........................................... III-4 Overview ...................................................... III-4 Before Y ou Start ........................................... III-4 Selecting PServer or RPrinter/NPrinter Mode ..................[...]

III - 3 Section 3 - NetW are OKI OkiLAN 6020e User’s Guide NetW are Chapter 3 OkiNet for NDS .................................... III-24 Overview .................................................... III-24 Installing OkiNet for NDS for Novell NetW are 4.1 .............................................. III-25 Installing OkiNet for NDS for Novell N[...]

III - 4 Section 3 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide Chapter 1: Introduction Overview This section contains instructions and information on how to conf igure your OkiLAN 6020e in the NetW are environment. There are three environments in which to configure the OkiLAN 6020e: • Bindery (NetW are 3.x) • NetW are Directory Se[...]

III - 5 Section 3 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide NetW are Selecting PServer or RPrinter/NPrinter Mode Y our OkiLAN 6020e supports both PServer and NPrinter mode. There are several f actors to consider when choosing which mode to use. In PServer mode, the OkiLAN 6020e operates as the print server. It services specif ied q[...]

III - 6 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide Chapter 2 OkiNet f or NetW are Overview This chapter contains information about how to configure the OkiLAN 6020e in Bindery and NDS en vironments using the OkiNet for NetW are utility. Note : OkiNet for NetW are contains minimal NDS configuration support. For more [...]

III - 7 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are Running OkiNet for NetW are T o run the utility, double-click on the OkiNet icon. The main OkiNet for NetW are screen will display. By default, the All Print Servers vie w is selected and all print servers attached to the network from which the OkiNet utili[...]

III - 8 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are Configuration Options T o conf igure options specif ic to the NetW are protocol, select the NetW are f ile tab . The following screen will display: PServer or RPrinter Mode Several factors should be considered when choosing between PServer or RPrinter mode.[...]

III - 9 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are NDS Settings NDS settings need to first be created and setup using the NW Admin or PConsole utility. Create an NDS print server object. Then, create one NDS printer object per output port. For example, Printer 1 goes to Port 1, Printer 2 goes to port 2. Att[...]

III - 10 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are Queue Load Balancing Print jobs can be distributed to multiple printers on selected queues by selecting the same queue multiple times and selecting a different output port for each queue entry. NetW are P ort Configuration Options T o modify the NetW are p[...]

III - 11 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are EtherT alk Configuration Options T o modify conf iguration settings specif ic to the EtherT alk protocol such as the name and zone. For specif ic information on other EtherT alk options, see Section VII, EtherT alk , or select the HELP b utton on the botto[...]

III - 12 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide • PostScript - Inserts the appropriate character string in front of each print job to switch the printer to the PostScript printer language. • Automatic - Enables the auto language sensing function. This function examines the print job data stream and determine[...]

III - 13 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are Bidirectional Printer Status Support Enable this option for enhanced status from bi-directional printers that support PJL. Output T ype Select the desired level of support for 1284 communications. The following settings are available: - Compatibility (no b[...]

III - 14 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide Fill in the following information: System Name Enter the name of your choice. This name will identify the OkiLAN 6020e in your SNMP-based management program. System Contact Enter any information useful to a user if problems with the OkiLAN 6020e arise. System Locat[...]

III - 15 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are T rap Community Name Enter the community name which will be used when traps are sent from the OkiLAN 6020e. This setting allows trap utilities to only accept traps from devices with appropriate community names. The T rap community name f ield is used by th[...]

III - 16 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide T rap Destination • NetW are Protocol - Enter the network number and hardware address, respectively, to which traps will be sent. T o broadcast traps to all addresses on all networks, enter FFFFFFFF (8 characters) in the first field and FFFFFFFFFFFF (12 character[...]

III - 17 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are Enabling/Disabling Protocols T o enable or disable protocols on the OkiLAN 6020e, select the Protocols f ile tab . Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6020e will no longer communicate using that protocol. T o redu[...]

III - 18 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide CAUTION: Make sure there are no print jobs active when you reset the OkiLAN 6020e. All protocols will be restarted. If you attempt a reset while a job is printing, the job may not print successfully. Restoring Factory Default Settings T o restore the OkiLAN 6020e t[...]

III - 19 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are CAUTION: Make sure there are no active print jobs when you select Restore Factory Defaults. If you reset the OkiLAN 6020e while a job is printing, the job may not print successfully. Creating Customized Views OkiNet for NetW are allows users to create mult[...]

III - 20 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide Modifying View Settings Before modifying the settings, select the name of the view you wish to edit from the Name field. Display Filter The filter option displays only those print servers matching specif ic criteria. The print server list can be filtered by any of [...]

III - 21 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are • Specify Devices/Networks - This method adds specific print servers (or groups of print servers) to the list. This can be useful when only a subset of the list of OkiLAN 6020e products is desired. T o select all desired print servers, select Add . Sort [...]

III - 22 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide Refresh The refresh rate defines how often the OkiNet for NetW are utility updates the main print server list. T o def ine a refresh rate, select the A utomatic Refresh box and then enter the refresh rate in the field provided. Decide how frequently to refresh the [...]

III - 23 Section 3 - Chapter 2 - OkiNet for NetW are OKI OkiLAN 6020e User’s Guide NetW are Set Community Name Enter the Set Community Name necessary to access the OkiLAN 6020e or group of OkiLAN 6020e products selected. Add Select the Add button to def ine access to a ne w OkiLAN 6020e or a group of OkiLAN 6020e products. Enter a serial number o[...]

III - 24 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide Chapter 3 OkiNet for NDS Overview OkiNet for NDS is a Dynamic Link Library (DLL) which allows users to create and manage OKI print server objects in the NDS tree. OkiNet for NDS integrates into Novell’s NetW are Administrator, a W indows-based utility that allows user[...]

III - 25 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Refer to the following table to determine which method to use to install OkiNet for NDS: NetW are V ersion Client Operating System W indows 3.x W indows 95/98 W indows NT/2000 NetW are 4.1 See Installing OkiNet for NDS for Novell NetW are 4.1 NetW are 4.11 and [...]

III - 26 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide Installing OkiNet for NDS for Novell NetW are 4.x, NetW are 5.x, and Windows 3.x OkiNet for NDS must be installed in the same location you have installed NetW are Administrator. This may be located on the file server or on an independent workstation. In most cases NetW [...]

III - 27 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Installing OkiNet for NDS for Novell NetW are 4.x, NetW are 5.x, Windows 95/98 and Windows NT/2000 OkiNet for NDS must be installed in the same location you have installed NetW are Administrator. This may be located on the file server or on an independent works[...]

III - 28 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide Creating a New OkiLAN 6020e Object T o create a new OkiLAN 6020e object from Novell’s NetW are Administrator, perform the following steps: 1. Select the container (also known as organizational unit) in which you want the object created. For example, to create an objec[...]

III - 29 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Note : If the Device list box is still empty, select Find Device . This will allow you to locate the specif ic de vice you are trying to def ine. Y ou will be prompted for the Ethernet address and network number of the device. A mismatch in the OKI device frame[...]

III - 30 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide 6. Select Assign . 7. Select or create a NetW are Printer object from the Printer/Queue Assignments dialog. 8. Select or create a NetW are Print Queue object from the Printer/Queue Assignments dialog. 9. Select OK to save your printer and queue selections. Note : T o lo[...]

III - 31 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide NetW are Configuring the OkiLAN 6020e Using OkiNet for NDS The following steps outline how to configure an OkiLAN 6020e. 1. From the NW Admin screen, select (double-click) the OkiLAN 6020e you wish to configure. 2. Set the appropriate configuration by choosing the appli[...]

III - 32 Section 3 - Chapter 3 - OkiNet for NDS OKI OkiLAN 6020e User’s Guide The install utility on the installation diskette can also be used to remove the OKI print server class. This utility removes the class from Novell’s NetW are Administrator and removes all the associated files that were copied during the installation process. Note : Be[...]

III - 33 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide NetW are Chapt er 4 Using the OkiL AN 6020e in NDPS (NetW are 4.x and 5.1) Introduction Novell  Distrib uted Print Services  (NDPS  ) is Novell’s new printing architecture for use with NetW are versions 4.x and 5.1. T o use the OkiLAN 6020e in[...]

III - 34 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide 7. Click Browse to display the Select Printer Dri ver dialog box. Locate the appropriate printer driver .INF file. 8. Select the .INF f ile and click OK . The .INF f ile and path is selected in the Resource location box. The printer drivers are in the Re[...]

III - 35 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide NetW are Setting Up the OkiLAN 6020e Through NW Admin32 There are two types of printers available with NDPS. One is Public Access, which anyone on the tree can get to. The other is Pri vate Access, which requires rights to the object. For Public Access p[...]

III - 36 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide Private Access Print ers: these can only be created through NW Admin32 1. Create NDPS Manager in NW Admin32. 2. Go to the Context in which the Private Printer is to reside. 3. Select Create. The New Object screen appears. 4. Click NDPS Printer, then clic[...]

III - 37 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide NetW are Setting Up the OkiLAN 6020e for Public Access Printers At the File Server Console 1. Create NDPS Manager in NW Admin32. 2. Load the NDPS Manager on the f ile server. 3. Select Insert New Printer Agent . 4. Give the Agent a Name. 5. Go to Configu[...]

III - 38 Section 3 - Chapter 4 - Using the OkiLAN 6020e in NDPS OKI OkiLAN 6020e User’s Guide[...]

TCP/IP Section IV : TCP/IP[...]

IV - 2 Section 4 - TCP/IP OKI OkiLAN 6020e User’s Guide In This Section Chapter 1Introduction ........................................... IV - 5 Overview ................................................................................... IV -5 Software Requirements ............................................................. IV -5 Network Prepar[...]

IV - 3 Section 4 - TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Saving the Configuration ........................................................ IV -34 Displaying OkiLAN 6020e Diagnostic Information ............... IV -34 Printing a Configuration Sheet ................................................ IV -3 4 Resetting the OkiLAN 6020e ...........[...]

IV - 4 Section 4 - TCP/IP OKI OkiLAN 6020e User’s Guide Configuring SCO UNIX for Printing with the OkiLAN 6020e ................................................... IV -7 3 IBM’s AIX ver. 3.x for Printing with the OkiLAN 6020e ................................................... IV -7 5 Configuring Solaris 2.x for Printing with the OkiLAN 6020e .[...]

IV - 5 Section 4 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 1 Introduction Overview This section contains instructions and information on how to conf igure your OkiLAN 6020e. Y ou will also be instructed on how to set up your host computers to print to the OkiLAN 6020e using the TCP/IP protocol. OkiLAN 6020e supports [...]

IV - 6 Section 4 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide Network Preparation • Y ou should be familiar with network administration as well as the physical setup and operation of your network. • Advise users of possible disruption during installation. • Make sure the serial number and Ethernet address of your OkiLAN 6020e ar[...]

IV - 7 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 2 Configuring the OkiLAN 6020e Choosing an IP Address Every TCP/IP network device is required to ha ve a unique IP address. The IP address can be permanently stored using one of the following: • OKI OkiNet management utilities for TCP/IP, No[...]

IV - 8 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide Configuring the OkiLAN 6020e There are four utilities available to configure the OkiLAN 6020e for TCP/IP printing. Y ou may use whichever utility is best suited for your needs. • OkiNet for TCP/IP - W indows TCP/IP print manager utility. See Chapter 3 of t[...]

IV - 9 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Gleaning If an IP address has not been permanently assigned when the OkiLAN 6020e is powered on or reset, it will look for a ping packet on the network. If the OkiLAN 6020e receives a ping packet within two minutes, it will accept the IP address in th[...]

IV - 10 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide DHCP The Dynamic Host Configuration Protocol (DHCP) provides a framework for passing configuration information to hosts on a TCP/IP network in a client/ server fashion. DHCP is based on the Bootstrap Protocol (BOOTP), adding the capability of automatic allo[...]

IV - 11 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP Static Route Entry When the OkiLAN 6020e is powered on or reset and no permanent IP address has been assigned, it will attempt to obtain an IP address through Gleaning, RARP, BOO TP or DHCP . If the OkiLAN 6020e has not determined its IP address afte[...]

IV - 12 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide Most UNIX operating systems support either the RARP or BOO TP protocol. T o f ind out which protocol your operating system supports, request the manual page for the protocol’s daemon (e.g. man bootpd or man rarpd ), or see your network manuals. Both proto[...]

IV - 13 Section 4 - Chapter 2 - Configuring the OkiLAN 6020e OKI OkiLAN 6020e User’s Guide TCP/IP V erifying Access to the OkiLAN 6020e Use the ping utility to verify access to the OkiLAN 6020e. ping < IP address of OkiLAN 6020e > If the OkiLAN 6020e does not respond, your network or the device is not conf igured correctly. • V erify the [...]

IV - 14 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide Chapter 3 TCP/IP Configuration and Printing Overview The OkiLAN 6020e supports printing from computers using TCP/IP and any of the following printing protocols: • Line Printer Redirect/Line Printer Daemon (lpr/lpd) • File T ransfer Protocol (FTP) ?[...]

IV - 15 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Configuring for TCP/IP Network Printing Most computers that support TCP/IP network printing use the Remote Line Printer Daemon (LPD) protocol. This protocol was originally part of the Berkeley Software Distribution (BSD) version of the UNIX oper[...]

IV - 16 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide The OkiLAN 6020e will parse the remote queue name and search for certain characters at the end which tell how to con vert an ASCII print job. The print server uses FF, LF and NF as ASCII con version specif iers and uses the last number as an output por[...]

IV - 17 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Configuring a BSD-Style Print Queue For remote BSD-Style LPD printing, add the OkiLAN 6020e as a remote printer in the “/etc/printcap” database to each host printing to the OkiLAN 6020e. Y ou can add PRINTCAP options as needed. If you are un[...]

IV - 18 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide log_file_name This is the path to a file where error information from the lpd will be logged. Example: If you are printing to an ASCII printer that requires a carriage return/line feed, you may need two separate printcap entries: one entry for print jo[...]

IV - 19 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Note: The Remote LPD implementation of the OkiLAN 6020e does not support any UNIX LPD input or output filters or the direct printing of banner pages. It is possible to configure some UNIX systems so that banner pages and input and output filters[...]

IV - 20 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TYPE Changes the representation type used for data transfer. Image (or binary) and ASCII are the only types supported. ASCII Equivalent to “TYPE ASCII.” BINAR Y Equivalent to “TYPE BIN AR Y .” IMAGE Equivalent to “TYPE IMAGE.” STRU Specifie[...]

IV - 21 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide TCP/IP Example: The following example prints a PostScript file called chart.ps to the OkiLAN 6020e printer Port 1 using FTP . $ ftp OkiLAN 6020e_name<Enter> Connected to OkiLAN 6020e_name. 220 ESI-2810 V ersion 3.0 ready. Name (OkiLAN 6020e_name:[...]

IV - 22 Section 4 - Chapter 3 - TCP/IP Configuration and Printing OKI OkiLAN 6020e User’s Guide Raw Port Printing Host computer software can use a raw TCP/IP port connection to send data to the OkiLAN 6020e. A TCP/ IP port has been assigned to the output port of the OkiLAN 6020e as follows: TCP/IP Port: 9100 Output Port: 1 Consult your system doc[...]

IV - 23 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 4 OkiNet for TCP/IP Overview This section contains information about OkiNet for TCP/IP . OkiNet for TCP/IP provides SNMP-based support for the entire OkiLAN 6020e family of print servers. OkiNet for TCP/IP allows you to: • Easily assign an IP address [...]

IV - 24 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Running OkiNet for TCP/IP T o run the utility, double-click on the OkiNet icon. The main OkiNet for TCP/IP screen will display. By default, the All Print Servers vie w is selected and all print servers attached to the subnet of the network from which the OkiNet utilit[...]

IV - 25 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Configuring TCP/IP Options T o conf igure options specif ic to the TCP/IP protocol, select the TCP/IP tab . The following screen will display: Fill in the following information: IP Address Resolution • Set Permanent - Select this option to make the IP address[...]

IV - 26 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Subnet Mask If your network environment includes subnets, you will want to set the subnet mask. The subnet mask must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255. The default subnet mask is 0.0.0.0. The OkiLAN 6020e interprets a subnet m[...]

IV - 27 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP T elnet/HTTP Password: Allows you to modify the current password required for T elnet or HTTP access The def ault password is the serial number of the OkiLAN 6020e. NetW are and NetW are P ort Configuration Options For specif ic information on NetW are or NetW [...]

IV - 28 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide EtherT alk Configuration Options T o modify the conf iguration settings specif ic to the EtherT alk protocol such as the name and zone. For specif ic information on EtherT alk options, see Section VI, EtherT alk , or select the HELP button on the bottom right of the s[...]

IV - 29 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP • OFF - Print data stream will be sent directly to the output port without alteration. • PCL - Inserts the appropriate character string in front of each print job to switch the printer to the PCL print language. • PostScript - Inserts the appropriate char[...]

IV - 30 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Output T ype Select the appropriate baud rate. Bidirectional Printer Status Support Enable this option for enhanced status from the bidirectional printer. SNMP Configuration Options SNMP options specify which information is necessary for an SNMP manger to access the O[...]

IV - 31 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP System Contact Enter any information useful to a user if problems with the OkiLAN 6020e arise. System Location Enter a description of the OkiLAN 6020e location. Get Community Name This field is used to set the community name required to Get information from the[...]

IV - 32 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Enabling/Disabling Protocols T o enable or disable protocols on the OkiLAN 6020e, select the Protocols tab . Select each protocol you wish to enable. If you disable a protocol, the OkiLAN 6020e will no longer communicate using that protocol. SNMP T rap Configuration T[...]

IV - 33 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP T rap Destination • TCP/IP Protocol - Enter the IP address to which traps will be sent. The IP address must follow the format XXX.XXX.XXX.XXX, where each XXX is a number from 0 to 255. T o broadcast traps to all hosts on the local subnet, enter 255.255.255.25[...]

IV - 34 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Saving the Configuration Once all settings have been def ined, select OK . The settings will be saved and you will be returned to the main OkiNet for TCP/IP screen. Displaying OkiLAN 6020e Diagnostic Information T o view OkiLAN 6020e diagnostic information, double cli[...]

IV - 35 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Restoring Factory Default Settings T o restore the OkiLAN 6020e to factory default settings, select the OkiLAN 6020e from the list of available print servers. From the Print Server menu bar, select Reset . From the Reset Print Server screen, choose one or more [...]

IV - 36 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Creating Customized Views OkiNet for TCP/IP allows users to create multiple customized views for the list of OkiLAN 6020e products. By creating different vie ws, the user can narrow the information displayed to that which is of highest priority. These views can be sa [...]

IV - 37 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Modifying View Settings Before modifying the settings, select the name of the view you wish to edit from the Name field. Sort The Sort option displays the OkiLAN 6020e list in a specif ic order. The list can also be sorted by clicking on the column by which you[...]

IV - 38 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide Search Filter The Search option defines the criteria for identifying OkiLAN 6020e products on the network. • Search Local Network - This method broadcasts a discovery request to locate all OkiLAN 6020e print servers on the local network. All OkiLAN 6020e print serve[...]

IV - 39 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP For example, if you currently have three columns displayed and you wish to add a fourth column to the far left of the screen, follow these steps: 1. Select the first column in the Columns Displayed field. 2. Select the column to be added from the Columns A vail[...]

IV - 40 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide T o conf igure OkiNet for TCP/IP to use the correct community names, select Special Options from the File menu. IP Address This field displays the address of each OkiLAN 6020e for which OkiNet for TCP/IP has def ined access. T o add a new IP address to this list, sele[...]

IV - 41 Section 4 - Chapter 4 - OkiNet for TCP/IP OKI OkiLAN 6020e User’s Guide TCP/IP Configuring the Discovery UDP Port Number In order to discover OkiLAN 6020e print servers on the network, OkiNet for TCP/IP communicates with the OkiLAN 6020e print servers on a UDP port number. Normally, using this port number should not interfere with other d[...]

IV - 42 Section 4 - Chapter 5 - W eb Configuration OKI OkiLAN 6020e User’s Guide Chapter 5 W eb Configuration If the DHCP protocol is enabled as a default, the print server may be accessed through an ordinary Internet W eb browser, such as Netscape Navigator or Microsoft Internet Explorer. See Section II, Chapter 4, OkiLAN 6020e W eb Configuratio[...]

IV - 43 Section 4 - Chapter 6 - T elnet Configuration OKI OkiLAN 6020e User’s Guide TCP/IP Chapter 6 T elnet Configuration Overview The OkiLAN 6020e Configuration utility ( telnet ) provides system, network and printer status information and allows you to change the configuration of your OkiLAN 6020e. Note: The conf iguration of your OkiLAN 6020e[...]

IV - 44 Section 4 - Chapter 6 - T elnet Configuration OKI OkiLAN 6020e User’s Guide ***************************************** OkiLAN 6020e Configuration Utility 1. Show Network/Printer Information 2. Change Password 3. Specify Print Server IP Address 4. Specify Subnet Mask For Y our Network 5. Identify Default Gateway IP Address 6. Configure Port[...]

IV - 45 Section 4 - Chapter 6 - T elnet Configuration OKI OkiLAN 6020e User’s Guide TCP/IP Specify Print Server IP Address (Option 3) This option allows you to select the method the OkiLAN 6020e uses to obtain its IP address or to set a permanent IP address. If the OkiLAN 6020e has been conf igured to use a permanent IP address, a DHCP, RARP or B[...]

IV - 46 Section 4 - Chapter 6 - T elnet Configuration OKI OkiLAN 6020e User’s Guide Note: If you select an invalid subnet mask you may not be able to access the OkiLAN 6020e. Use this option with care! Identify Default Gateway IP Ad dress (Option 5) If your local network is attached to other networks, you must specify the address of your default [...]

IV - 47 Section 4 - Chapter 6 - T elnet Configuration OKI OkiLAN 6020e User’s Guide TCP/IP Conf igure Printer T ype This option enables you to indicate the printer type to which the OkiLAN 6020e is connected. Printer choices are: 1. Oki Data printer. 2. Custom printer. • Language Switching Sequence - If you select Custom Printer from the Config[...]

IV - 48 Section 4 - Chapter 6 - T elnet Configuration OKI OkiLAN 6020e User’s Guide Restore to Factory Default Configuration (Option 9) This option automatically restores the OkiLAN 6020e to its original factory defaults. Be aware that when you restore the OkiLAN 6020e to the original factory default settings, only the TCP/IP protocol and output [...]

IV - 49 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP Appendix A T roubleshooting Main Status Indicator Upon power-up, the main status indicator flashes orange. It changes to green when the OkiLAN 6020e passes self-test. The indicator stays orange if the OkiLAN 6020e fails self-test. If the indicator turns solid o[...]

IV - 50 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide Unable to Assign IP Ad dress Gleaning If you ping the device and are not getting a response, the glean is not working. Check the following possible problems: • V erify the ARP table contains the correct hardware and IP address by running the ‘ arp -a ’ command. [...]

IV - 51 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP UNIX BOOTP If you are running UNIX, try the following methods with the BOOTP server (check the documentation for your particular UNIX flavor). • V erify the BOO TP server has reread the “/etc/ bootptab” file when the new entry was added. If the BOOTP serv[...]

IV - 52 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide Static Route Entry If the OkiLAN 6020e has printed a configuration page showing the default address, but it cannot be reached through telnet , check the following: • Display the host’s routing tables with the ‘netstat - r’ command. V erify the route has been s[...]

IV - 53 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP OkiNet for TCP/IP - Winsoc k Errors • If you see an error before OkiNet for TCP/IP appears on the screen, try setting a host name in the host’s file in the W indows directory (check the documentation for your W indows TCP/IP stack). • If you have dif f ic[...]

IV - 54 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide Printing a Configuration Page If the status indicator turns solid orange due to an error and no configuration page is printed, your printer may be configured for PostScript operation. If so, you must re-conf igure your printer for standard ASCII mode so that the confi[...]

IV - 55 Section 4 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide TCP/IP • If the ftp succeeds, there is a problem with the lpr/ lp setup. V erify the hostname or IP address is correctly set for the queue. T ry doing an lpstat (System V) or lpq (BSD) to query the status of the OkiLAN 6020e. FTP • If the indicator blinks green, t[...]

IV - 56 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Appendix B Application Considerations Overview This appendix provides application notes for the following: • Assigning the OkiLAN 6020e IP Address with BOOTP • Assigning the OkiLAN 6020e IP Address with RARP • Using the W indows NT v3.5 LPR Print Monit[...]

IV - 57 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Assigning the OkiLAN 6020e IP Address with BOOTP BOOTP is an acronym for BOOT Strap P rotocol. Every TCP/IP network device is required to ha ve a unique 32-bit IP address assigned to it. TCP/IP network devices will have both an IP address and a 48 bit[...]

IV - 58 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide A name can be arbitrarily assigned to any device on a network. The following examples use the name OKIPRINTER. Remember that this name is arbitrary; a customer can assign any name they wish. /etc/bootptab: The “/etc/bootptab” file has entries where each [...]

IV - 59 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 4. The bootpd daemon transmits a response to the OkiLAN 6020e with the IP address 192.168.42.55. The OkiLAN 6020e will use this IP address for all subsequent transmissions. For these steps to work properly, at least one BOO TP daemon (bootpd) must be [...]

IV - 60 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Configuring the OkiLAN 6020e IP Address with RARP RARP is an acronym for R everse A ddress R esolution P rotocol. Every TCP/IP network device must ha ve a unique 32-bit IP address. TCP/IP network devices will have both an IP address and a 48-bit Ethernet (ne[...]

IV - 61 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Configuration Files The purpose of RARP is to look up a 32-bit IP address given a 48-bit network hardware address. The RARP server (which is usually a UNIX workstation running a rarpd daemon) performs this function using two conf iguration f iles and [...]

IV - 62 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide 4. The rarpd then consults the “/etc/hosts” file and looks up the name OKIPRINTER. It finds an IP address (in this case 192.168.42.55) associated with the name OKIPRINTER. 5. The rarpd daemon transmits a response to the OkiLAN 6020e with the IP address 1[...]

IV - 63 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Configuring HP-UX v8.07 for Printing with the OkiLAN 6020e This application note describes the configuration of the printing system on the HP-UX ver. 8.07 of the UNIX operating system. For clarity and bre vity, the following specific names will be use[...]

IV - 64 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide 2. Make sure the rlp process is not running by typing at the UNIX prompt: ps -e | grep rlp If rlp is not running, you will not see any output after executing this command. If rlp is running (that is, if you see output after executing this command), kill the [...]

IV - 65 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 3. Select the following options, in order, from the SAM menu: Peripheral Devices -> Printers and Plotters -> Actions -> Add a Remote Printer (Do NO T select Add a Network Printer) A form appears asking you to define a remote printer. 4. Enter[...]

IV - 66 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide 6. Enable the printer you just created using SAM. Peripheral Devices -> Printers and Plotters -> Enable a Printer ... 7. Printer name: — lj4 8. Start the LP request scheduler by typing: /usr/lib/lpsched 9. Run a test print job to the OkiLAN 6020e wit[...]

IV - 67 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Prerequisites Before you proceed, the following prerequisites must be met. Most of the time steps 2 through 5 are already conf igured since the HP-UX system is on a TCP/IP network. Do not perform steps 2 through 5 unless the installation procedure fai[...]

IV - 68 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Procedure HP-UX uses an interactive utility called SAM (System Administration Manager) to configure printing. 1. Login to the HP-UX system as root. 2. Invoke the SAM utility by typing sam at the UNIX prompt. (W e suggest you do this at the system console. SA[...]

IV - 69 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP h) Allow anyone to cancel requests. Check if desired. i) Remote printer is on a BSD system. Check this box. T ells the HP-UX system that it is communicating with a Berkeley style remote printer (such as LPD). 5. Select the OK b utton. A status window [...]

IV - 70 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide • yourqueuename - This is the name of the queue on the OkiLAN 6020e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. If FF, LF or NF are the last two letters of the queue name, the job will be converted accordingly.[...]

IV - 71 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 4. Make sure the following entry is in the “/etc/services” file: printer 515/tcp spooler 5. Start inetd by typing the following at the UNIX prompt: /etc/inetd -c Procedure HP-UX uses an interactive utility called SAM (System Administration Manager[...]

IV - 72 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide c) Remote printer name - yourqueuename This is the name of the queue on the OkiLAN 6020e and must end with 1, 2, 3 or 4, depending on the port selected to service the print jobs. d) Remote cancel model - rcmodel Used for remote printer job removal. e) Remote[...]

IV - 73 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Configuring SCO UNIX for Printing with the OkiLAN 6020e This application note describes the configuration of the printing system on the Santa Cruz Operation’s (SCO) version of the UNIX operating system. For clarity and brevity, the following specif [...]

IV - 74 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Procedure 1. Login to the SCO machine as root. 2. Install Remote Line Printing or verify that it is running by typing mkdev rlp at the UNIX prompt. It will respond by asking if you want to install or remove remote line printing. Choose Install even if remote[...]

IV - 75 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP IBM’s AIX ver. 3.x f or Printing with the OkiLAN 6020e This application note describes the configuration of the printing system on IBM’s AIX version 3.x of the UNIX operating system. The following specif ic names will be used to represent general [...]

IV - 76 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide 3. T o add a remote queue, select the following options from the SMIT menu: Spooler (Print Jobs and Printers) Manage Remote Printer Subsystem Client Services Remote Printer Queues Add a Remote Queue A form appears asking you to define a remote print queue. 4[...]

IV - 77 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP 6. Start the qdaemon by typing: AIX> startsrc -s qdaemon 7. Try printing to the printer attached to the OkiLAN 6020e by issuing the following command: AIX> lpr -Plj4 filename Configuring Solaris 2.x for Printing with the OkiLAN 6020e This applic[...]

IV - 78 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide Prerequisites Before you proceed, the following prerequisites must be met: 1. The name OKIPRINTER and the IP address assigned to the OkiLAN 6020e are in the “/etc/hosts” file on the Solaris system. 2. Make sure the LPD daemon is running on the Solaris sy[...]

IV - 79 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide TCP/IP Configuring Sun-OS v4.1.x or Ultrix v4.2 for Printing with the OkiLAN 6020e This application note describes the configuration of the printing system on the Sun-OS ver 4.1.x and Ultrix ver. 4.2 of the UNIX operating system. For clarity and brevity, the[...]

IV - 80 Section 4 - Appendix B - Application Considerations OKI OkiLAN 6020e User’s Guide If the LPD daemon is running, you should see output similar to: root 135 0.0 0.0 52 0 ? IW May 24 0:01 /usr/lib/lpd If the LPD daemon is not running, start the daemon by logging into the Sun-OS or Ultrix machine as root and issuing the following command at t[...]

IV - 81 Section 4 - Appendix C - Internet Printing Protocol (IPP) OKI OkiLAN 6020e User’s Guide TCP/IP Appendix C Internet Printing Protocol (IPP) Internet Printing Protocol (IPP) is an application level protocol that can be used for distributed printing over the Internet. Using the new IPP protocol from any standard IPP client, you can print to [...]

IV - 82 Section 4 - Appendix C - Internet Printing Protocol (IPP) OKI OkiLAN 6020e User’s Guide[...]

LAN Manager/ Server Section V : LAN Manager/LAN Server[...]

V - 2 Section 5 - LAN Manager/LAN Server OKI OkiLAN 6020e User’s Guide In This Section Chapter 1 Introduction ........................................... V - 3 Overview ....................................................... V -3 System Requirements .................................... V -3 Chapter 2 Installation .................................[...]

V - 3 Section 5 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 1 Introduction Overview This section contains information about the OkiNet for OS/2 utility. This utility allows you to install and configure the OkiLAN 6020e for your specific en vironment. The utility provides conf iguration information and allo[...]

V - 4 Section 5 - Chapter 1 - Introduction OKI OkiLAN 6020e User’s Guide DLC/802.2 Protocol Stack The DLC/802.2 protocol stack must be loaded and running on the file server from which the OKI Network Printer Redirector will run. W ith LAN Manager, this means you must enable the remote boot facility. W ith LAN Server, you must select the 802.2 pro[...]

V - 5 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 2 Installation Overview T o install the OkiLAN 6020e: 1. Install the OkiNet for OS/2 utilities software. 2. Run the OkiNet for OS/2 utility to add a local printer port. 3. Associate a print queue with the new local printer port. Once the installat[...]

V - 6 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide • The initial installation requires the file server to be brought down and then back up again. This may be a consideration when you are planning your install. Depending on your current configuration, the following software may also be needed: • Printer driver installatio[...]

V - 7 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Running INST ALL 1. Login to the server with administrator privileges. If you are reinstalling the utility, disable the spooler before running install. If this is the first time you have installed the utility, disabling the spooler is optional. 2. From th[...]

V - 8 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide 3. Select OK . The ESI Print Server Status Screen will display. From the Configure menu, select Add Local Port . 4. Select a print server and port. Print servers are identif ied by serial number. (Y ou will find the serial number for your OkiLAN 6020e on the enclosure.) The [...]

V - 9 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Creating an OS/2 Printer T o print to the local port created by OkiNet for OS/2, you must create an OS/2 printer. OS/2 1.3 1. Open the Print Manager from the desktop. 2. Select SETUP from the menu. 3. Select Printers . This will display a list of printers[...]

V - 10 Section 5 - Chapter 2 - Installation OKI OkiLAN 6020e User’s Guide Printing a Configuration Sheet Y ou can verify communication by printing a configuration sheet using OkiNet for OS/2. 1. Select Configure from the main Print Server window. 2. Select Conf igure Print Server . 3. Select the OkiLAN 6020e you would like to test. 4. From the op[...]

V - 11 Section 5 - Chapter 3 - Printing in the OS2 En vironment OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 3 Printing in the OS/2 Environment Overview OS/2 provides several methods for selecting a printer from within an application. The best method to use depends on the specif ic application. The following methods are provided as s[...]

V - 12 Section 5 - Chapter 3 - Printing in the OS2 En vironment OKI OkiLAN 6020e User’s Guide 3. Select the print queue associated with the OkiLAN 6020e. OS/2 applications that use the default printer will now print to the printer attached to the OkiLAN 6020e. The OS/2 print screen function uses the OS/2 default printer. This function is in voked[...]

V - 13 Section 5 - Chapter 4 - Additional Utility F eatures OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Chapter 4 Additional Utility Features Overview Y ou can run the OkiNet for OS/2 utility at any time to access the following optional features: • Deleting a Local Port • Configuring a Print Server Deleting a Local Port The delete comma[...]

V - 14 Section 5 - Chapter 4 - Additional Utility F eatures OKI OkiLAN 6020e User’s Guide 3. From the Configure menu, select Conf igure Print Serve r. The following screen will display: The OkiLAN 6020e will reset by selecting OK to save any of the options, except the Print Configuration Sheet option. Configuring Parallel Port P1 Ports P1 must be[...]

V - 15 Section 5 - Chapter 4 - Additional Utility F eatures OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Restoring Factory Defaults The Restore Defaults option restores the factory default settings for the LAN Manager/LAN Server protocol and output ports. T o restore factory defaults, select an OkiLAN 6020e from the list on the left. Then se[...]

V - 16 Section 5 - Chapter 5 - Using HELP OKI OkiLAN 6020e User’s Guide Chapter 5 Using Help Overview The OkiNet for OS/2 utility provides both general and context-specific help. General Help T o access help information about installation and configuration, select Help from the main menu, then select General Help . T o access help information abo[...]

V - 17 Section 5 - Appendix A - T roubleshooting OKI OkiLAN 6020e User’s Guide LAN Manager/ Server Appendix A T roubleshooting No Configuration Sheet If the LED turns solid orange due to a network protocol error and no configuration sheet is printed, your printer may be configured for PostScript operation. If so, you must re-conf igure your print[...]

[...]

EtherT alk Section VI: EtherT alk Support for Apple® MacIntosh®[...]

VI - 2 Section 6 - EtherT alk OKI OkiLAN 6020e User ’ s Guide In This Section Chapter 1 Introduction .......................................... VI-3 Overview ...................................................... VI-3 System Requirements ................................... VI-3 Before Y ou Start ........................................... VI-3 Ch[...]

VI - 3 Section 6 - Chapter 1 - Intr oduction OKI OkiLAN 6020e User ’ s Guide EtherT alk Chapter 1 Introduction Overview This section describes the steps necessary to configure the EtherT alk protocol. The following topics are covered in this section: • Setting the Printer Name • Selecting a Zone • Selecting the Printer from the Macintosh Ch[...]

VI - 4 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User ’ s Guide Chapter 2 The OkiLAN 6020e Utility Overview The OkiLAN 6020e utility allows the user to: • Change the OkiLAN 6020e product’ s AppleT alk Name • Move the OkiLAN 6020e from the Default Zone to a Preferred Zone • Print Configuration Page and view Status I[...]

VI - 5 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User ’ s Guide EtherT alk Renaming the OkiLAN 6020e Printer The OkiLAN 6020e Printer Selection window contains a list of all OkiLAN 6020e printers found in the selected zones. OkiLAN 6020e printers are listed alphabetically by name. Each port of a multiport OkiLAN 6020e will[...]

VI - 6 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User ’ s Guide Print Configuration The Print Configuration option is accessed by selecting Print Config from the File pull-down menu. Choose this option to print an OkiLAN 6020e configuration sheet. A configuration sheet will print to all output ports. Status The Status opti[...]

VI - 7 Section 6 - Chapter 2 - The OkiLAN 6020e Utility OKI OkiLAN 6020e User ’ s Guide EtherT alk Enable Port This option allows you to enable or disable a port. If a port is disabled, it will appear in the OkiLAN 6020e utility but will not appear in the Chooser . A disabled port cannot be configured. The only valid options for a disabled port a[...]

VI - 8 Section 6 - Appendix A - T r oubleshooting OKI OkiLAN 6020e User ’ s Guide Appendix A T roubleshooting Before Y ou Call This appendix allows you to troubleshoot problems you may have installing or using the EtherT alk protocol. After trying these suggestions, if you are still having difficulty , call Oki Data Customer Support at 1-800- OKI[...]

VI - 9 Section 6 - Appendix A - T r oubleshooting OKI OkiLAN 6020e User ’ s Guide EtherT alk Unable to Print from a Macintosh If you are unable to print from a Macintosh via the OkiLAN 6020e, try the following: • V erify the OkiLAN 6020e appears in the Chooser as a LaserW riter device. If the OkiLAN 6020e does appear in the Chooser , make certa[...]

VI - 10 Section 6 - Appendix A - T r oubleshooting OKI OkiLAN 6020e User ’ s Guide If the directory does not print, send the directory again, and watch the OkiLAN 6020e activity indicator . If the status indicator flashes to indicate activity , data is reaching the OkiLAN 6020e. Send the document again and watch the printer for activity . If you [...]

VI - 11 Section 6 - Appendix A - T r oubleshooting OKI OkiLAN 6020e User ’ s Guide EtherT alk • Compare the zone in which the OkiLAN 6020e appears in the Chooser to the zones searched. Search the same zone where the OkiLAN 6020e appears in the Chooser . OkiLAN 6020e Utility Errors Message: AppleT alk network is inaccessible. Recommended Action:[...]

VI - 12 Section 6 - Appendix A - T r oubleshooting OKI OkiLAN 6020e User ’ s Guide Message: No OkiLAN 6020e device(s) found. V erify the OkiLAN 6020e is power ed on. Recommended Action: Confirm the device is powered on and the LED is green. V erify correct zone to search by printing a configuration sheet. Message: Option is not available with thi[...]

VI - 13 Section 6 - Appendix B - Selecting Y our Printer OKI OkiLAN 6020e User ’ s Guide EtherT alk Appendix B Selecting Y our Printer T o Select Y our Printer 1. Click on the Apple in the menu bar and select Chooser . 2. Click on the Print Driver icon. If a caution box appears, click OK . If the Print Driver icon doesn’t appear in the left sid[...]

VI - 14 Section 6 - Appendix C - Capturing with a Spooler OKI OkiLAN 6020e User ’ s Guide 2. Click on the printer name you want to use. Note: If your printer is the only name listed in the box, it still must be selected. Y our printer will remain selected until you choose a different printer with your Chooser . 3. Click on the Close box to exit t[...]

VI - 15 Section 6 - Appendix C - Capturing with a Spooler OKI OkiLAN 6020e User ’ s Guide EtherT alk Releasing 1. Use the OkiLAN 6020e utility to: a) Change T ype 1 to LaserW riter b) Change T ype 2 to LaserShared 2. Release the OkiLAN 6020e from the print spooler application. 3. Use the OkiLAN 6020e utility to remove T ype 2. The two device type[...]

VI - 16 Section 6 - Appendix C - Capturing with a Spooler OKI OkiLAN 6020e User ’ s Guide[...]

Windows Printing Section VII: Windows Printing[...]

VII - 2 Section 7 - W indows Printing OKI OkiLAN 6020e User’s Guide In This Section Chapter 1 OkiLAN 6020e Set Up for Windows NT 4.0/2000 ........................................... VII-3 Overview .................................................... VII-3 OkiLAN 6020e Connect for IP ................... VII-3 OkiLAN 6020e Connect for DLC .........[...]

VII - 3 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Windows Printing Chapter 1 OkiLAN 6020e Set Up for Windows NT 4.0/2000 Overview This section contains instruction and information on how to set up your OkiLAN 6020e for a W indows NT 4.0/2000 en vironment. Print options for Windows NT 4.0/2000 include[...]

VII - 4 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Installation T o install OkiLAN 6020e Connect for TCP/IP, follow the instructions below: 1. Install the OkiLAN 6020e Connect for TCP/IP f iles - see Section I. 2. When installation is complete, click on Start , Settings and then Printers . 3. Select t[...]

VII - 5 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Windows Printing 5. From the list of A vailable Printer P orts , select OKI OkiLAN 6020e Connect IP Monitor as the type of port to add and click New Port . Y ou will enter into the Add OkiLAN 6020e Connect Port screen where there will be a list of all[...]

VII - 6 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Notify When Printed This feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description An optional field where you may list the location or other useful information about the pr[...]

VII - 7 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Windows Printing Notify When Printed This feature will provide an alert when your job is active on the printer. This may be useful if the printer is especially busy. Description An optional field where you may list the location or other useful informa[...]

VII - 8 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Install LPR Print Monitor 1. Open the W indows NT Control Panel . 2. Select the Services tab. 3. Select Add , then Microsoft TCP/IP printing . 4. Click the Close button. 5. Restart the system. Assign Print Server IP Address 1. Using OkiNet for IP , as[...]

VII - 9 Section 7 - Chapter 1 - OkiLAN 6020e Setup for W indows NT OKI OkiLAN 6020e User’s Guide Windows Printing 5. In the Name or address of server providing lpd: f ield, enter the IP address you assigned to the printer. 6. In the Name of printer or print queue on that server: field, enter the print server output port being used. For example, f[...]

VII - 10 Section 7 - Chapter 2 - OkiLAN 6020e Setup for W indows 95/98 OKI OkiLAN 6020e User’s Guide Chapter 2 OkiLAN 6020e Set Up for Windows 95/98 Overview This section contains instruction and information on how to set up your OkiLAN 6020e for a W indows 95/ 98 en vironment. Print options for Windows 95/98 include: • OkiLAN 6020e Connect for[...]

VII - 11 Section 7 - Chapter 2 - OkiLAN 6020e Setup for W indows 95/98 OKI OkiLAN 6020e User’s Guide Windows Printing 3. Select the W indows printer from which you would like to print with OkiLAN 6020e Connect, then select Properties from the F ile menu. 4. Add an OkiLAN 6020e Connect port. This may be done by selecting Add Port under the Details[...]

VII - 12 Section 7 - Chapter 2 - OkiLAN 6020e Setup for W indows 95/98 OKI OkiLAN 6020e User’s Guide 8. Click OK . Y ou will now be able to use OkiLAN 6020e Connect for TCP/IP . Whenever you print to the printer configured with OkiLAN 6020e Connect, your print job will go directly to the OkiLAN 6020e print server port. Port Settings If you have p[...]

VII - 13 Section 7 - Chapter 2 - OkiLAN 6020e Setup for W indows 95/98 OKI OkiLAN 6020e User’s Guide Windows Printing 4. Add an OkiLAN 6020e Connect port. This may be done by selecting Add Port under the Details tab . 5. In the Add P ort window, select the radio button labeled Other and select OKI OkiLAN 6020e Connect DLC Monitor as the type of p[...]

VII - 14 Section 7 - Chapter 2 - OkiLAN 6020e Setup for W indows 95/98 OKI OkiLAN 6020e User’s Guide Output Port Configuration Options T o conf igure the OkiLAN 6020e output port, select the Output Port tab. Port Number Select the port number you wish to configure. Configuration Page Language Select the appropriate printer language for printing a[...]

OkiView 32 Section VI I I: OkiView 32[...]

VIII - 2 Section 8 - OkiV iew 32 OKI OkiLAN 6020e User’s Guide In This Section Chapter 1 Introduction ............................................ VIII-3 OkiV ie w 32 Installation Requirements ...... VIII-3 Chapter 2 OkiView 32 Printer Panel .................... VIII-4 OkiV ie w 32 Printer Properties Menu .......... VIII-4 Changing the Printer’[...]

VIII - 3 Section 8 - OkiV iew 32 OKI OkiLAN 6020e User’s Guide OkiView 32 Chapter 1 Introduction The OkiV iew 32 Utility provides a simple, quick way of vie wing the status of all brands of network printers on Microsoft/Novell networks, as well as configuring and maintaining Oki network printers on those networks. The main screen contains the Oki[...]

VIII - 4 Section 8 - OkiV iew 32 OKI OkiLAN 6020e User’s Guide Chapter 2 OkiView 32 Printer Panel The Printer Panel is the OkiV iew 32 main display. The display is divided into two smaller panels: the Printer Filters Panel and the Printer Information Panel. The Printer Information Panel, on the right hand side of the main display, shows a list of[...]

VIII - 5 Section 8 - OkiV iew 32 OKI OkiLAN 6020e User’s Guide OkiView 32 Status The Status screen is reached from the Printer Properties menu. This screen displays descriptive information about the printer, as well as its online/offline status and the status text displayed on the printer’s front panel. Network Property Page The Network Propert[...]

VIII - 6 Section 8 - OkiV iew 32 OKI OkiLAN 6020e User’s Guide Changing the Printer’s Name and Location 1 Select a printer on the Printer Information Panel. 2 From the Printer menu, click Printer Properties. 3 Change the text in the name and/or location fields. 4 Click OK. OkiView 32 Discovery Preferences This screen allows the user to customiz[...]

Regulatory Information Section IX: Regulatory Information[...]

IX - 2 Section 9 - Regulatory Information OKI OkiLAN 6020e User ’ s Guide Federal Communications Commission Radio Frequency Interference Statement This equipment generates and uses radio frequency energy . If not installed and used according to the manufacturer ’ s instructions, this equipment may cause interference with radio/TV reception. The[...]

Index Index A Advanced Configuration Options OkiLAN 6020e utility (EtherT alk), VII-6 Advanced Management Features network alert, II-18 OkiNet for TCP/IP , II-19 printer security for TCP/IP Printing, II-19 security , II-5 Advanced management Features OkiNet for NDS, II-19 Assigning an IP Address BOOTP , IV -1 1 to IV -12, IV -57 to IV -59 DHCP , IV[...]

Index - 2 Index OKI OkiLAN 6020e User ’ s Guide Diagnostic Information displaying in NetW are, III-17 DLC/802.2 Protocol Stack, VI-4 E Enabling/Disabling Protocols OkiNet for NetW are, III-17 OkiNet for TCP/IP , IV -32 Error Messages EtherT alk, VII-11 to VII-12 TCP/IP hardware, IV -53 EtherT alk OkiLAN 6020e utility advanced configuration option[...]

Index - 3 Index OKI OkiLAN 6020e User ’ s Guide Index INST ALL, LAN Manager/LAN Server installation, VI-7 running the utility , VI-7 IP Address assigning BOOTP , IV -1 1 to IV -12 DHCP , IV -10 gleaning, IV -9 RARP , IV -1 1 to IV -12 static route entry , IV -1 1 choosing, IV -7 J JetAdmin Support, II-6 to II-7 AppleT alk configuration, II-7 NetW[...]

Index - 4 Index OKI OkiLAN 6020e User ’ s Guide port configuration options, III-10 resetting the OkiLAN 6020e, III-17 restoring factory default settings, III-18 running the utility , III-7 searching for a specific OkiLAN 6020e, III-19 SNMP access information, III-22 to III-23 view settings, modifying, III-20 to III-22 OkiNet for OS/2 configuring [...]

Index - 5 Index OKI OkiLAN 6020e User ’ s Guide Index S SCO UNIX Application prerequisites, IV -73 procedure, IV -74 Security in SNMP , II-5 Selecting a Zone in EtherT alk, VII-5 Selecting Y our Printer in EtherT alk, VII-13 to VII-14 Set Community Name in TCP/IP , IV -31 SNMP configuration options, OkiNet for TCP/IP , IV -30 to IV -31 private MI[...]

Index - 6 Index OKI OkiLAN 6020e User ’ s Guide restoring to factory defaults, IV -49 static route entry , IV -52 unable to assign IP address, IV -50 to IV -53 unable to print, IV -54 to IV -55 UNIX BOOTP , IV -51 W insock errors, IV -53 U Ultrix v4.2 Application prerequisites, IV -79 to IV -80 procedure, IV -80 UNIX BOOTP T roubleshoot- ing, IV [...]