Onkyo TXNR828 Bedienungsanleitung

E n AV RECEIVER TX-NR828 Instruction Manual Contents Safety Information and Introduction ............ 2 Table of Contents ............. .............. ........... ..... 6 Connections ....... .............. ........... .............. ... 14 Turning On & Basic Operati ons .................. 24 Playback .................... .............. ........[...]

En-2 Safety Information and Introduction Important Safety Instructions 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow al l instruc tions. 5. Do not use this apparatus near water. 6. Clean only with dry cloth. 7. Do not block any ventilation openings. Insta ll in accordance wit h the manu facturer’s instruc[...]

Safety Information and Introduction En-3 Precautions 1. Recording Copyright —Unless it’s for personal use only, recording co pyrighted material is ille gal without the permission of th e copyright holder. 2. AC Fuse —The AC fuse inside th e unit is not user- serviceable. If you cann ot turn on the unit, contact your Onkyo dealer. 3. Care —O[...]

Safety Information and Introduction En-4 RF Exposure Compliance This equipment complies w ith FCC/IC radiation exposure limits set forth for an uncontrolled environment and meets the FC C radio frequency (RF) Exposure Guidelines in Suppl ement C to OET65 and RSS-102 of the IC radio frequen cy (RF) Exposure rules. This equipmen t has very low levels[...]

Safety Information and Introduction En-5 – Hiermit erklärt Onkyo Cor poration, dass sich das Gerät TX-NR828 in Übereinstimmung mit den grundlegenden Anforder ungen und den übrigen einschlägigen Besti mmungen der Richtlinie 1999/5/EG befindet. – Käesolevaga kinnitab Onkyo Corporation seadme TX-NR828 vastavust direktiivi 1 999/5/EÜ põhin?[...]

Safety Information and Introduction En-6 Table of Contents Safety Information and Intro duction Important Safety Instructions ......................................2 Precautions ................................................................... 3 Supplied Accessories......................... .......................... 5 Table of Contents .........[...]

Safety Information and Introduction En-7 Features Amplifier • 130 Watts/Channel @ 8 ohms (FTC) • 180 Watts/Channel @ 6 ohms (IEC) • 215 Watts/Channel @ 6 ohms (JEITA) • WRAT–Wide Range Amplifier Technology (5 Hz to 100 kHz bandwidth) • Optimum Gain Volume Circuitry • H.C.P.S. (High Current Power Supply) Massive High Power Transformer [...]

Safety Information and Introduction En-8 Front & Rear Panels Front Panel (North Americ an models) (European and Australian models) fg e hi j cd b a xz A B y kl m o p r s w tv q nu C[...]

Safety Information and Introduction En-9 For detailed information, see the pages in parentheses. a 8 ON/STANDBY button ( 24 ) b Remote control sensor ( 13 ) c BLUETOOTH indicator ( 34 , 78 ) d Wi-Fi indicator ( 30 ) e Display ( 10 ) f MASTER VOLUME control an d indicator ( 32 , 52 ) g HYBRID STANDBY indicator ( 25 ) h PURE AUDIO button and indicato[...]

Safety Information and Introduction En-10 s For detailed information, see the pages in parentheses. a Speaker/channel indicators b Z2 (Zone 2) indicato r ( 80 ) c Z3 (Zone 3) indicato r ( 80 ) d Listening mode and fo rmat indicators ( 44 , 72 ) e M.Opt (Music Optimizer) indicator ( 58 ) f 1 , 3 and cursor indicators ( 35 ) g NET indic ator ( 35 to [...]

Safety Information and Introduction En-11 See “Connecting Your Sp eakers” for connection ( ➔ pages 14 to 23 ). a u REMOTE CONTROL jack b COMPONENT VIDEO IN and OUT jacks c ETHERNET port d Wireless antenna When the AV receiver is co nnected to the network by wireless, a djust th e position of the antenna ( ➔ pages 30 , 34 ). Rear Panel lm n [...]

Safety Information and Introduction En-12 Remote Controller To control the AV receiver, press RECEIVER to select Receiver mode. For detailed information, see the pages in parentheses. a 8 RECEIVER button ( 24 ) b ACTIVITIES butto ns ( 54 , 90 ) c REMOTE MODE/INPUT SELECTOR buttons ( 32 ) d SP (speaker layout) button ( 53 ) e q / w / e / r and ENTER[...]

Safety Information and Introduction En-13 ■ Aiming the remo te controller To use the remote controller, point it at the AV receiver’s remote control sensor, as shown below. ■ Installing the batteries Note • If the remote controller doesn’ t work reliably, try replacing the batteries. • Don’t mix new and old batteries or different type[...]

En-14 Connections Connecting the AV Receiver Speaker Configurati on The following table indicates the cha nnels you should use depending o n the number of speakers that you have. No matter how many speakers you use, a powered subwoofer is recommended fo r a really powerful and solid bass. To get the best from your surround sound system, you need to[...]

Connections En-15 Attaching the Speake r Cable Label s The speaker terminals are color-coded for identification purpose. The supplied speaker cable labels are also colo r- coded and you should attach them to the positive (+) side of each speaker cable in accordance with the table above. Then all you need to do is to match the color of each label to[...]

Connections En-16 Connecting the Speaker Cables/Powere d Subwoofers Please connect a , b , c , d , e and f for 5.1-channel surrou nd. • Pay close attention to speaker wirin g polarity. In other words, connect positive (+) terminals only to positive (+) terminals, and negati ve (–) terminals only to negative (– ) terminals. If you get them the[...]

Connections En-17 • Make sure the metal core of the wire does not have contact with the AV receiver’s rear panel. Doing so may damage the AV receiver. • Don’ t connect more than one cable to each speaker terminal. Doing so may dama ge the AV receiver. • Don’t connect one speaker to several terminals. Bi-amping the Front Spea kers Bi-amp[...]

Connections En-18 If you select the input select or butto n, the signal from the component connected to the assigned ja ck is played. • Before making any AV connections, read th e manuals supplied with your AV componen ts. • Push plugs in al l the way to make good connecti ons (loose connections can cau se noise or malfunctions). • To prevent[...]

Connections En-19 ■ MHL (Mobile High-Definition Link) With its support for MHL (Mobile High-Defin ition Link), the AUX (Front) input allows you to deliver high- definition video from a connected mobile device . Connecting to the Network (Opt ional) The following diagram shows how you can conn ect the AV receiver to your home network. In this exam[...]

Connections En-20 ■ For p -compatible TV The following linked operations are enabled by connecting the AV receiver to an p -co mpatible TV. • The AV receiver will enter standby mode when the TV is set to standby. • You can set on the menu screen of the TV to either output the audio from th e speakers connected to the AV receiver, or from the [...]

Connections En-21 The composite vide o and comp onent video outputs pass through their re spective input signals as they are. Note • In order for the AV receiver to upconvert component input to HDMI output, the source output must be set to 480i/576i. When signal is input at resolution of 480p/576p and more, error message will be displayed. ■ Si[...]

Connections En-22 ■ Optical digital audio Optical digital connections allow you to enjoy di gital sound such as PCM *1 , Dolby Digital or DTS. The audio quality is the same as coa xial. ■ Coaxial digital audio Coaxial digital con nections allow you to enj oy digital sound such as PCM *1 , Dolby Digital or DTS. The audio quality is the same as o[...]

Connections En-23 With u (Remote Interactive), you can use the following special functions: ■ System On/Auto Power On When you start playback on a component connecte d via u , while the AV receiver is on standby, the AV receiver will automati cally turn on and select that component as the input source . ■ Direct Change When playback is started [...]

En-24 Turning On & Basic Operations Turning On/Off the AV Receiver Note • Before connecting the power cord, con nect all of your speakers and AV components. • Turning on the AV receiver ma y cause a momentary power surge that might interfere with other electrical equipment on the same circuit. If this is a problem, plug the AV receiver into[...]

Turning On & Basic Operations En-25 When a new version of the firmware is available, the notifica tion window “ Firmware Update Available ” pops up. This notificati on only appears when the AV receiver is connected to the Internet ( ➔ pages 19 , 30 ). To perform the firmware update, follow th e instructions on scre en. Use q / w and ENTER[...]

Turning On & Basic Operations En-26 This step checks the co nnection of source components. With this step, you can ente r remote control codes for the components you want to operate. This step checks your network co nnection. This step ends the initial setu p process. Source Connection 1 Use q / w to select one of th e following options, and th[...]

Turning On & Basic Operations En-27 With the supplied calib rated microphone, Audyssey MultEQ ® automatically determines the number of speakers connected, their size for purposes of bass management, opti mum crossover frequencies to the subwoofer (if present), and distances from the primary listening position. Audyssey Mu ltEQ then removes the[...]

Turning On & Basic Operations En-28 1 Turn on the AV receiver and the connected TV. On the TV, select the input to which the AV receiver is connected. 2 Set the speaker setup microphone at the Main Listening Position a , and connect it to the SETUP MIC jack. The speaker setting menu appears. Note • The on-screen menus appear only on a TV that[...]

Turning On & Basic Operations En-29 Note • You can cancel Audyssey MultEQ ® Room Correctio n and Speaker Setup at any point in this procedure simply by disconnecting the setup microphone. • Do not connect or disc onnect any speakers during Audyssey MultEQ Room Correction and Speaker Setup. • If the AV receiver is muted, it will be unmute[...]

Turning On & Basic Operations En-30 To achieve a wireless network con nection, it is necessary to perform the wireless LAN setup. The setup can be done e ither automatically or manually . You use your AV receiver as a wireless c lient (wireless terminal) and connect it to a PC or to the Internet. Automatic wirele ss LAN setup Performing Wireles[...]

Turning On & Basic Operations En-31 Manual wireless LAN setup 1 Press RECEIVER fo llowed by HOME. 2 Use e / r or q / w to select “Setup”, and then press ENTER. 3 Use q / w to select “Hardware Setup”, and then press ENTER. 4 Use q / w to sele ct “Network”, and then press ENTER. 5 Use q / w to select “Network Connection”, and e / [...]

En-32 Playback Playback This section describes the basic operati on such as playback, listening mode, and other use ful functions. Reading this man ual from the beginning to this section helps you to understand th e basic connection/setup/operatio n. ■ Screen Saver If there is no video signal on the current input source and no operation for a spe[...]

Playback En-33 ( ➔ page 34 ) Tip • See “Controlling Other Components” about the operation of other components ( ➔ page 82 ). • The AV receiver supports Album art display, and displaying image file format of JPEG, PNG, and BMP is possible. The image file format cannot be displayed in eithe r of the following cases: – Total number of ho[...]

Playback En-34 This section describes icons that appear on the AV receiver’s display during med ia playback. About the Bluetooth Wireless Techn ology Bluetooth wireless technology is a short-range wireless technology th at enables wireless data communication between digital devi ces. Bluetooth wireless technology ope rates within a range of about[...]

Playback En-35 Tip • The AV receiver may not work as normal depending on the circumstance even though the AV re ceiver is placed within the 15 meters range. In such cases, get the Blue tooth- enabled device closer to the AV receiver and retry the operation. • When disconnecting on your Bluetooth-enabled device, BLUETOOTH indicator on the AV rec[...]

Playback En-36 Either of the following menus can be selected by pressing the MENU button on the remote control ler or pressing ENTER button to select “ Go to Menu ”. ` Add to My Presets In this menu, stations or programs can be stored in “ My Presets ”. ` Remove from My Presets In this menu, stations or programs stored in “ My Presets ”[...]

Playback En-37 You need to connect the AV receiver to your home network ( ➔ pages 1 9 , 30 ). Tip • The on-screen information appears only on a TV that is connected to HDMI outputs. Internet radio URLs in the following formats are supported: PLS, M3U, and podcast (RSS). However, depending on the type of data or audio fo rmat used by the Interne[...]

Playback En-38 Windows Media Player Setu p ■ Windows Media Player 11 Setup This section explains how to configure Windows Media Player 11 so that the AV receiver can play the music files stored on your comp uter. ■ Windows Media Player 12 Setup This section explains how to configure Windows Media Player 12 so that the AV receiver can play the m[...]

Playback En-39 This section explains ho w to play music files on a computer or NAS (Network Attached Storag e) through the AV receiver. Windows 8/Windows 7 Setup ■ Setting the sharing options ■ Creating a shared folder Playing music file s on a shared folder In order to enjoy Home Media, you mu st first create a shared fold er on your computer [...]

Playback En-40 You need to connect the AV receiver to your home network ( ➔ pages 1 9 , 30 ). Tip • The on-screen information appears only on a TV that is connected to HDMI outputs. Remote playback is supp orted by Windows Media Player 12. Remote Playback means you can pla y the music files stored on a media server or personal computer with the[...]

Playback En-41 This section describes the procedure of usi ng the buttons on the front p anel, unless otherwise specified. Using the Tuner With the built-in tuner you can enjoy AM and FM radio stations. You can store your favorite station s as presets for quick selection. You can also change the frequen cy steps ( ➔ page 74 ). Tuning into Radio S[...]

Playback En-42 ■ Selecting Presets ■ Deleting Presets Using RDS (excluding North American models) When tuned into an RDS station, the RDS indicator lights. When the stati on is broadcasting text information, the text can be displayed. ■ What is RDS? RDS stands for Radio Data System and is a method of transmitting data in FM radio signals. It [...]

Playback En-43 ■ Listening to Traffic News (TP) You can search fo r stati ons that broadcast traffic news. RDS program types (PTY) You can listen to the audio of one input source whil e watching the video of anoth er. This function takes advantage of the fact that when an audio-only input source ( PHONO , TV/CD , PC , TUNER ) is selected, the vid[...]

Playback En-44 About Listenin g Modes The AV receiver’s listening mo des can transform your listening room i nto a movie theater or co ncert hall, with high fidelity an d stunning surround sound. Selecting Listening Modes ■ Listening Mode Buttons MOVIE/TV button This button selects the listening modes intended for use with movies and TV. MUSIC [...]

Playback En-45 Input Source The following audio formats are su ppo rted by the listening modes. Speaker Layout The illustration shows which sp eakers are activated in each channel. See “Speaker Configuration” for the speaker setup ( ➔ page 64 ). *1 After enabling the corresponding speakers, press RECEIVER followed by SP (speaker layout) repea[...]

Playback En-46 ■ Listening Modes T-D (Theater- Dimensi onal) With this mode you can enjoy a virtual surround sound even with only two or three speakers. Thi s works by controlling how sounds reach the listener’s left and right ears. Good results may not be possible if there’s too much reverb, so we recommend that you use this mode in an envir[...]

Playback En-47 DTS-ES Matrix *6 This mode is for use with DTS-ES Matrix soundtracks, which use a matrix- encoded back-channel for 6.1/7.1- channel playback. Use it with DVDs that bear the DTS-ES logo, especially those with a DTS-ES Matrix soundtrack. GV Dolby Pro Logic IIx *7 Dolby Pro Logic II Dolby Pro Logic IIx expands any 2- channel source for [...]

Playback En-48 Audyssey DSX *8 • Audyssey DSX Audyssey DSX ® is a scalable system that adds new speakers to improve surround impression. Starting with a 5.1 system Audyssey DSX first adds Wide channels for the biggest impact on envelopment. Research in human hearing has proven that information from the Wide channels is much more critical in the [...]

Playback En-49 • Dolby Pro Logic II/IIx Movie + THX Cinema • Dolby Pro Logic II/IIx Music + THX Music • Dolby Pro Logic II/IIx Ga me + THX Games The combination of Dolby Pro Logic II/IIx *7 and THX Cinema/Music/Games modes can be used. The PLII / PLIIx and THX indicators light on the AV receiver’s display. SC N • Dolby Pro Logic IIx Movie[...]

Playback En-50 Note *1 Pure Audio cannot be selected when Zone 2 /3 is active. Besides, if you activate Zone 2/3 while Pure Audio is selected, the listening mode will automatically switch to Direct. *2 Based on the audio channel signal contained in the source, the corresponding speakers will output the sound. *3 The AV receiver can input the DSD si[...]

Playback En-51 Dialogue Normalization Dialogue Normalization (Dia logNorm) is a feature of Dolby Digital, which is used to keep the programs at the same average listening le vel so the user does not have to change the volume control betwee n Dolby Digital, Dolby Digital Plus and Dolby TrueHD programs. When playing back software which has been encod[...]

Playback En-52 You can display va rious information about the current input source as follows. The following information can be typically displayed. *1 If the input signal is digital, the signal format is displayed. With the sleep timer, you can set the AV receiver to turn off automatica lly after a specified period. You can adjust the brightness o[...]

Playback En-53 When you connect an u -capable Onkyo component, you must config ure the input display so that u can work properly. This setting can be done only from the front panel. You can temporari ly mute the output of the AV receiver. You can set which speakers you want to use by priority. Note • This setting is not available in either of the[...]

Playback En-54 By using ACTIVITIES in Easy macro mode, you can sequentially operate Onkyo components via simple commands from a single-button press. These commands are user-definable. See “Using Normal Macros” ( ➔ page 90 ). ■ MY MOVIE First, the TV, the Onkyo Bl u-ray Disc player, and the AV receiver are turned on . The input selector is s[...]

Playback En-55 The Home menu provides quick access to frequentl y used menus. Tip • The on-screen menus appear only on a TV that is connected to HDMI OUT MAIN . ■ Setup ` With this selection, y ou can access the common settings of th e on-screen Setup menu. Press ENTER to display the Setup menu ( ➔ page 60 ). ■ InstaPrevue ` With this selec[...]

En-56 Advanced Operations On-screen Setup This section describes the procedure for usin g the remote controller unless otherwise specified. With the AV receiver conne cted to a TV, there are two ways of changing the settings on-screen: using the Quick Setup or the Setup Menu ( HOME ). ■ Quick Setup The Quick Setup provides quick access to frequen[...]

Advanced Operations En-57 Operating procedure ( ➔ page 56 ) *2 • The video preview is not displayed when: – HDMI IN 5/6/7 is the current HDMI input source, or – No signal is present o n the current input source. • The video of the currently-selected input is displayed on the main screen, not on a preview thumbnail. *3 “ Dynamic EQ ” a[...]

Advanced Operations En-58 Operating procedure ( ➔ page 56 ) Speaker Leve ls ■ Subwoofer Le vel ` –15.0dB to 0.0dB to +12.0dB in 0.5 dB steps. ■ Center Level ` –12.0dB to 0.0dB to +12.0dB in 0.5 dB steps. You can adjust the volume of each speaker while listening to an input source. These temporary adjustments are cancelled when the AV rece[...]

Advanced Operations En-59 Operating procedure ( ➔ page 56 ) Re-EQ (Re-Equalizat ion) Movie soundtracks were designed for playback in large movie theaters using professio nal equipment. If the movies were not remixed for the home theater, the tonal balance of the soundtracks can be excessively bright and harsh when played b ack over home audio equ[...]

Advanced Operations En-60 Note • This procedure can also be per formed on the AV receiver by using HOME , the cursor and enter (middle) buttons. • During Audyssey MultEQ ® Room Correction and Speaker Setup, messages, etc., that are displayed on the TV screen will appear on the AV receiver’s display. Using the Setup Menu (HOME) 1 Press RECEIV[...]

Advanced Operations En-61 Operating procedure ( ➔ page 60 ) Explanatory Notes a Main Menu b Sub Menu c Setting target d Setting options (default setting underl ined) Monitor Out On the “ Monitor Out ” settings, you can select whether or not to hav e the video sources’ images output through the HDMI ou tput. If you connect your TV to HDMI ou[...]

Advanced Operations En-62 Operating procedure ( ➔ page 60 ) Tip • You can see the picture by pressing ENTER to check the “ Resolution ” setting for HDMI OU T MAIN (excluding NET , USB and BLUETOOTH input source). Note • With some TVs, video signals are processed in the same way as “ Through ” when this setting is set to “ 4K ”. ?[...]

Advanced Operations En-63 Operating procedure ( ➔ page 60 ) Component Video Input If you connect a vi deo component to a comp onent video input, you must assign that input to an inpu t selector. For example, if you connect your Bl u-ray Disc/DVD player to COMPONENT VIDEO IN 2 , you must assign “ IN2 ” to the “ BD/DVD ” input selector. Her[...]

Advanced Operations En-64 Operating procedure ( ➔ page 60 ) ■ Speakers Type(Fro nt) ` Normal : Select this if you’ve connected your front speakers normally. ` Bi-Amp : Select this if you’ve bi-amped your front speakers. ■ Powered Zone 2 ` No ` Yes : Zone 2 speakers can be used (Powered Zone 2 enabled). Note • If the “ Speakers Type(Fr[...]

Advanced Operations En-65 Operating procedure ( ➔ page 60 ) ■ Double Bass ` On ` Off(THX) Turn this setting on to b oost bass output by feeding bass sounds from the front le ft, right, and center channels to the subwoo fer. Default setting: “ ----- ” Note • When the “ Subwoofer ” setting is set to “ No ” or the “ Front ” setti[...]

Advanced Operations En-66 Operating procedure ( ➔ page 60 ) ` Off : Tone off, response flat. Note • When the Direct or Pure Audio listening mode is selected, the equalizer settings have no effect. • If “ Audyssey ” is enabled, it prevai ls over this setting ( ➔ page 68 ). THX Audio Setup ■ Surr Back Speaker Spacing ` <1ft (<0.3m[...]

Advanced Operations En-67 Operating procedure ( ➔ page 60 ) With the Audio Adjust func tions and settings, you can adjust the sound and listening modes as you like. Multiplex/Mono ■ Multiplex Input Channel ` Main ` Sub ` Main/Sub This setting determines which channel of a stereo multiplex source is output. Use it to select audio channels or lan[...]

Advanced Operations En-68 Operating procedure ( ➔ page 60 ) ■ TrueHD Loud ness Management ` Off ` On This setting specifies whether or not to apply the La te Night processing on a Dolby TrueHD source . Note • When this setting is set to “ Off ”, the Late Night function for Dolby TrueHD sources is automatically fixed to “ Off ”. • Wh[...]

Advanced Operations En-69 Operating procedure ( ➔ page 60 ) ■ Dynamic EQ ` Off ` On : Audyssey Dynamic EQ ® becomes active. The Dynamic EQ indicator will light. With Audyssey Dynamic EQ, you can enjoy great sound even when listening at low volume levels. Audyssey Dynamic EQ solves the probl em of deteriorating sound qual ity as volume is decre[...]

Advanced Operations En-70 Operating procedure ( ➔ page 60 ) IntelliV olume ■ IntelliVolume ` –12dB to 0dB to +12dB in 1 dB steps With IntelliVolume, you can set the input le vel for each input selector individually. This is useful if one of your source components is loude r or quieter than the others. Use e / r to set the level. If a componen[...]

Advanced Operations En-71 Operating procedure ( ➔ page 60 ) Picture Adju st Using Picture Adjust, you can adjust th e picture quality and reduce any noise appearing on the screen. Press ENTER to view the TV picture while setting when the video source is output to HDMI OUT MAIN . To return to the previous screen, press RETURN . ■ Wide Mode *1* 6[...]

Advanced Operations En-72 Operating procedure ( ➔ page 60 ) ■ Hue *1*2*4 ` –50 to 0 to +50 With this setting, you can adjust the color hue between “ –50 ” a nd “ +50 ”. ■ Saturation *1*2*4 ` –50 to 0 to +50 With this setting, you c an adjust satura tion. “ –50 ” is the weakest color. “ +50 ” is the strongest color. ■[...]

Advanced Operations En-73 Operating procedure ( ➔ page 60 ) You can assign a defau lt listening mode to each input source that will be selected auto matically when you select each input source. For exa mple, you can set the default listening mode to be used with Dol by Digital input signals. You can select othe r listening modes during playback, [...]

Advanced Operations En-74 Operating procedure ( ➔ page 60 ) ■ Headphone Level ` –12dB to 0dB to +12dB With this setting, you can specify the headphone volume relative to the main volume. Th is is useful if there’s a volume difference be tween your speakers and your headphones. OSD Setup ■ On Screen Display ` On ` Off This preference deter[...]

Advanced Operations En-75 Operating procedure ( ➔ page 60 ) ■ HDMI Through ` Off ` BD/DV D , CBL/SAT , STB/DVR , GA ME1 , GAME2 , PC , AUX , TV/CD , PHONO : Selects the input source for which the HDMI Through functio n is enabled. ` Last : The HDMI Through functi on is activated on the input source selected at the time of setting the AV receive[...]

Advanced Operations En-76 Operating procedure ( ➔ page 60 ) ■ Audio Return Channel ` Off ` Auto : The audio signal from you r TV tuner can be sent to HDMI OUT MAIN of th e AV receiver. The audio return channel (ARC) function allows an ARC capable TV to send the audio stream to HD MI OUT MAIN of the AV receiver. To use this function, you must se[...]

Advanced Operations En-77 Operating procedure ( ➔ page 60 ) Network This section explains how to configure the AV receiver’s network settings manually. After modifying the network settings, you must confirm the changes by executing “ Save ”. If your router’s DHCP server is enabled, you don’t need to change any of these settings, as the [...]

Advanced Operations En-78 Operating procedure ( ➔ page 60 ) ■ Bluetooth This setting enables the AV receiver to pair with Bluetooth-enabled device. Status Press ENTER button to display “ Now Pairing ” and start pairing. Tip • If pairing setting is not set, “ Ready ” appears on-screen display. The name of the device paired with the AV [...]

Advanced Operations En-79 Multi Zone In addition to the main listening room, you can also enjoy pla yback in the other room, or as we call Multi Zone. And, you can se lect a diff eren t source f or each room. Connecting Your Zone 2 Speakers Directly to the AV r eceiver This setup allows you to select different sources for Main ro om and Zone 2 . Th[...]

Advanced Operations En-80 12V Trigger Ou t When Zone 2 is turned on , the output from the ZONE 2 12V TRIGGER OUT jack goes high (+12 V and max. 150 mA for Zone 2). Connecting this jack to a 12-volt trigger input on a component in Zone 2 wil l make that component turn on or off as the AV receiver turns on or off the Zone 2. ■ Operating on the AV r[...]

Advanced Operations En-81 Muting Zone 2 ■ Operating on the remote controller Tip • To unmute, press ZONE followed by MUTING again. Zone 2 can also be unmuted by adjusting the volume. Note • Only analog, NET or USB input source is output from the ZONE 2/ZONE 3 LINE OUT jacks and ZON E 2 L/R terminals. • You cannot select different AM or FM r[...]

En-82 Operating procedure ( ➔ page 60 ) Controlling Other Components Controlling Other Components You can use the AV receiver’ s remote contro ller to control your other AV compon ents, including those made by other manufactu rers. This section explains how to enter the remo te control code for a componen t that you want to cont rol: DVD, TV, C[...]

Controlling Other Components En-83 Note • Though the provided remote control co des are correct at the time of release, t hey are subject to change. You can change the confi gur ation of colored buttons, with which REMOTE MODE buttons ar e preset. Tip • To reset the REMOTE MODE buttons to their default settings, see “Resetting the REMOTE MODE[...]

Controlling Other Components En-84 You can reset the remote controller to its default settings. By pressing the REMOTE MODE button that’s been programmed with the remote control code for your component, you can cont rol your compon ent as described below. For details on entering a remote control code for other components, see “Entering Remote C[...]

Controlling Other Components En-85 ■ TV operation ■ Blu-ray Disc playe r/HD DVD player operation ■ DVD player/DVD reco rder operation ■ VCR/PVR operation ■ Cassette tape deck operation c d b a j k n l m f g h i e Press the appropriate REMOTE MODE button first. Available buttons a 8 , INPUT , TV VOL q / w g Number: 1 to 9 , 0 b GUIDE Numbe[...]

Controlling Other Components En-86 ■ Satellite receiver/Cable receiver operation ■ CD player/CD recorder/MD recorder operation Note • With some components, certain buttons may not work as expected, and some may not work at all. • See “Controlling Your iPod/iPhone” about the operation of iPod/iPhone ( ➔ page 88 ). *1 The p function is [...]

Controlling Other Components En-87 RI Dock With the RI Dock, you can easily play the music of your iPod/iPhone, or watch the slideshows and videos of your iPod/iPhone on a TV. In addition, the on-screen display (OSD) allows you to vie w, navigate, and select your iPod/iPhone model’ s contents on your TV, and with the supplied remote controller, y[...]

Controlling Other Components En-88 By pressing the REMOTE MODE button that’s been programmed with the remote control code for your Dock, you can control your iPod/iPhone in the Dock with the buttons described furth er in this section. See “Entering Remote Control Codes” for deta ils on entering a remote control code ( ➔ page 82 ). See the D[...]

Controlling Other Components En-89 The AV receiver’s remote controller can learn the commands of other remote controllers. By transmitting, for example, the Play command from your CD player’s remote controller, the supplied remote controller can learn it and then reproduce th e exact same command when its 1 is pressed in CD remote mode. This is[...]

Controlling Other Components En-90 You can program th e remote controller’s ACTIVITIES to perform a sequence of remote control actions. Example: To play a CD you typically need to perform the following actions: 1. Press RECEIVER to select the Receiver remote controller mode. 2. Press 8 RECEIVER to turn on the AV receiver. 3. Press TV/CD to select[...]

En-91 Appendix Troubleshooting If you have any trouble using the AV receiver, look for a solution in this sectio n. If you can’t resolve the issue yourself, contact your Onkyo dealer. If you can’t resolve the iss ue yourself, try resetting the AV receiver before contacti ng your Onkyo dealer. To reset the AV receiver to it s factory defaults, t[...]

Appendix En-92 ■ Only the front speakers produce sound ■ Only the center sp eaker produces sound ■ The surround speakers produce no sound ■ The center speaker produces no sound ■ The front high, front wi de and surround back speakers produce no sound ■ The subwoofer pr oduces no sound ■ There’s no sound w ith a certain signal format[...]

Appendix En-93 ■ The beginning of audio received by an HDMI IN can’t be hea rd ■ There’s no sou nd during Whole Hou se Mode ■ There’s no picture ■ There’s no picture from a source connected to an HDMI IN ■ The on-screen me nus don’t appear ■ The on-screen informati on does not appe ar ■ Reception is noisy, FM st ereo recepti[...]

Appendix En-94 ■ Can’t learn commands from another remote controller ■ There’s no sound ■ There’s no video ■ The AV receiver’s remote controller doesn’t control my iPod/iPhone ■ The AV receiver unexp ectedly selec ts my iPod/iPhone as the input s ource ■ iPod/iPhone doesn’t work prop erly ■ There’s no sound ■ The Zone [...]

Appendix En-95 ■ Bluetooth con nection cannot be buil t ■ Can’t access the server or Internet radio ■ Playback stops while listen ing to music files on the server ■ Can’t connect to the AV receiver from a Web browser ■ Can’t access the music files on a USB device ■ Standby power consumptio n ■ The sound changes wh en I connect m[...]

Appendix En-96 button simultaneo usly. While holding dow n the input selector button, press HOME un til “ Video ATT :On ” appears on the AV receiver’s display. Then, release both buttons. To turn the setting off, repeat the above process so that “ Video ATT :Off ” appears on the AV receiver’s display, and release the buttons. • Video [...]

Appendix En-97 The radio waves received by the AV receiver include the radio wave coming directly from the devices and waves coming from various directions due to reflections by walls, furnitur e and building (reflected waves). The reflected waves (due to obstacles and reflecting objects) further produce a variety of reflected waves as well as vari[...]

Appendix En-98 DISCLAIMER Through this device you are able to link to other services or websites which are not under the control of any company which has designed, m anufactured or distributed/have distributed this device, and its affiliates (collectiv ely, “Company”). We ha ve no c ontrol over the nature, content and availability of thos e ser[...]

Appendix En-99 Operating procedure ( ➔ page 60 ) Firmware Update To update the firmware of the AV receiver, you can choose from the following two methods: update via network, or update via USB storage. Choose the one that best suits your envir onment. Before proceeding with the update, p lease read th e corresponding explanations carefully. ■ U[...]

Appendix En-100 Operating procedure ( ➔ page 60 ) Troubleshooting Case 1: If an error occurs, “ Error!! *-** ” is displayed on the AV receiver’s display. (Alpha-numeric characte rs on the front display are deno ted by asterisks.) Refer to the following table and take appropriate action. ■ Errors during an update via netwo rk Case 2: If an[...]

Appendix En-101 Operating procedure ( ➔ page 60 ) Update Procedure Troubleshooting Case 1: If an error occurs, “ Error !! *-** ” is displayed on the AV receiver’s display. (Alpha-numeric characte rs on the front display are denoted b y asterisks.) Refer to the following table and take appropriate actio n. ■ Errors during an update via USB[...]

Appendix En-102 About HDMI Designed to meet the increa sed demands of digital TV, HDMI (High Definition Multimedia Interface) is a new digital interface stan dard for connecting TVs, projectors, Blu-ray Disc/DVD players, set-top boxes, and other video components. Until now , several separate video and audio cables have been requi red to connect AV [...]

Appendix En-103 Network/USB Features ■ Ethernet Network For the best results, a 100Base-TX switched Ethern et network is recommended. Although it’s possible to play music on a computer that’s connected to the network wirelessly, playback may be unreliable, so it is recommended to use wired connections. ■ Ethernet Router A router manages the[...]

Appendix En-104 • Operation is not guaranteed for all USB devices, which includes the ability to power them. • Do not connect your USB device via a USB hub. The USB device must be connected directly to t he AV receiver’s USB port. • If the USB device contains a lot of data, the AV receiver make take a while to read it. • USB devices with [...]

Appendix En-105 License and Trademark Information “x.v.Color” is a trademar k of So ny Corporation. Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending. DTS-HD, the Symbol, & DTS-HD and the Symbol [...]

Appendix En-106 Specifications Amplifier Sect ion Video Section Tuner Section Network Section The Bluetooth ® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Onkyo is under license. Other trademarks and trade names are those of their respective owners. Onkyo does not guarantee Bluetooth compa[...]

Appendix En-107 Bluetooth Section *1 The actual range will vary depending on factors such as obstacles between devices, magnetic fields around a microwave oven, static electricity, cordless phone, reception sensitivity, antenna’s performance, operating system, software application, etc. General ■ HDMI ■ Video Inputs ■ Video Outputs ■ Audi[...]

2-1, Nisshin-cho , Ney aga wa-shi, OSAKA 572-8540, J AP AN http://www .onkyo .com/ 18 P ark W a y , Upper Saddle River , N.J. 07458, U.S .A. For Dealer , Service, Order and all other Business Inquir ies: T el: 201-785-2600 F ax: 201-785-2650 http://www .us.onkyo .com/ For Product Support Team Only: 1-800-229-1687 http://www.us.onkyo.com/ Liegnitzer[...]

Using Internet Radio En-1 Using Internet Radio Note • Available services may vary depending on the region. • Certain network service or c ontents available through this device may not be accessible in case the service provider terminates its service. Using Multipl e Accounts The AV receiver supports mu ltiple user accounts, which means you can [...]

Using Internet Radio En-2 Pandora is a free, persona liz ed Internet radi o service that plays the music you know and helps you discover music you’ll love. PANDORA, the PANDORA l ogo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora ® internet radio –Getting Started (U.S. [...]

Using Internet Radio En-3 Using Rhapsody (U.S. only) 1 Use q / w to select “Sign in to your acc ount” and then press ENTER. To use Rhapsody, you need an account. If you don’t have one yet, you can create a new account at www.rhapsody.com/onkyo If you have an existing Rhapsody account, se lect “ Sign in to your account ” and press ENTER . [...]

Using Internet Radio En-4 Your Onkyo AV receiver includes a free trial of SiriusXM Internet Radio. The “Account Info” screen shows how many days are left in your trial. After the trial period expires, if you wa nt to continue listening to the service, you must subscribe. To subscribe go to www.siriusxm. com/internetradio with your computer. Whe[...]

Using Internet Radio En-5 Last.fm is a music service that learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.fm account, it will keep track of all the songs you’ve just pl ayed. When you visit the Last.fm website, you can see personal charts of th e music you’ve enjoyed, sh are them with friends a nd see [...]

Using Internet Radio En-6 Using Slacker Personal Radio 1 If you do not have an account, create one on the Slacker website (w ww.slacker.com) with your computer. If you already have a Slacker account, select “Sign in to your account” and then press ENTER. The keyboard screen a ppears. You can ente r information from the remo te control or the ke[...]

Using Internet Radio En-7 Listen to your music collection on your home stereo in complete digital fidelity without a personal computer plus safely backup all yo ur songs. Here’s how: Creating an Account on your Computer Playing Contents on the AV Receiver Tip • Before proceeding, you need to sele ct the MP3tunes service as described in “Commo[...]

Utilisation d’une webradio Fr-1 Utilisation d’une webradio Remarque • Les services disponibles peuvent varier en fonction de la région. • Certain services réseau ou contenus disponible via cet appareil peuvent être inaccessibles au cas où le prestataire de services termi nerait son service. Utilisation de plusieurs comptes L’ampli-tun[...]

Utilisation d’une webradio Fr-2 Pandora est un service de radio en ligne libre et personnalisé vous permettant de lire la musique que vous connaissez et de déco uvrir celle que vous aimez. PANDORA, le logo PANDORA, et l’habillage commercial Pandora sont de s marques commerciales ou des marques dé posées de la société Pandora Media, Inc. U[...]

Utilisation d’une webradio Fr-3 Utilisation de Rhapsody (Etats-Unis uniquement) 1 Utilisez q / w pour sélectionner « Sign in to your account », puis appuyez sur ENTER. Vous devez posséder un compte pour utiliser Rhapsody. Si vous ne d isposez pas encore d’un compte, vous pouvez en créer un à partir de www.rhapsody.com/onkyo Si vous possé[...]

Utilisation d’une webradio Fr-4 Votre ampli-tuner AV Onkyo comprend un essai gratuit de SiriusXM Internet Radio. L’écran « Account Info » affiche le nombre de jours restants dans votre essai. Une fois la période d’essai expirée, si vous souhaitez continuer à écouter le service, vous devez vous abonner. Pour vous inscri re, accédez à [...]

Utilisation d’une webradio Fr-5 Last.fm un service de mu sique qui apprend ce que vous aimez… Votre nouv el ampli-tun er AV On kyo est très intelligen t. Si vous avez un compte Last.f m gratuit, il garde un e trace de t outes les ch ansons que vous avez juste jouées. Quand vous vou s rendez sur le site Web d e Last.fm, vous pouvez voir les gr[...]

Utilisation d’une webradio Fr-6 Utilisation de Slacker Personal Radio 1 Si vous ne possédez pas de compte, créez-en un à partir du site Web de Slacker (www.slacker.com) à l’aide de votre ordinateur. Si vous possédez déjà un compte Slacker, sélectionnez « Sign in to your account », puis appuyez sur ENTER. L’écran clavier s’affiche[...]

Uso de In ternet Radio Es-1 Uso de Internet Radio Nota • Los servicios disponibles pueden variar de una región a otra. • Es posible que determinados servicios de red o contenidos disponibles a través de este dispositivo no sean accesibles si el proveedor del servicio da por finalizado el servicio. Uso de múl tiples cuentas El receptor de AV [...]

Uso de In ternet Radio Es-2 Pandora es un servicio de radio por Internet gratuito y personalizado que reproduce la música qu e usted conoce y le ayudará a de scubrir música que le encantará. PANDORA, el logotipo de PANDORA logo, y la imagen corporativa de Pando ra son marcas comerciales o marcas comerciales registradas de Pandora Media, Inc. Us[...]

Uso de In ternet Radio Es-3 Uso de Rhapsody (sólo EE.UU.) 1 Utilice q / w para seleccionar “Sign in to your account” y luego pulse ENTER. Para utilizar Rhapsody, necesitará un a cuenta. Si todavía no tiene una, puede crear una nue va en www.rhapsody.com/onkyo Si ya tiene una cue nta Rhapsody, seleccione “ Sign in to your account ” y puls[...]

Uso de In ternet Radio Es-4 Su receptor de AV Onkyo incluye una prueba gr atuita de SiriusXM Internet Rad io. La pantalla “Account Info” muestra los días que que dan de la prueba. Una vez que termine el periodo de prueba, si desea seguir escuchando este servicio, deberá contratarlo. pa ra suscribirse vaya a www.siriusxm. com/internetradio con[...]

Uso de In ternet Radio Es-5 Last.fm es un servicio mus ical que sabe lo que le gusta... Su nuevo receptor de AV Onkyo es muy inteligente. Si tiene una cuen ta gratuita de Last.fm, hará un seguimiento de todas las canciones que acaba de escuchar. Cuando vi site el sitio w eb de Last.fm, podrá ver listas personales de la música que ha disfrutado, [...]

Uso de In ternet Radio Es-6 Uso de Slacker Personal Radio 1 Si no tiene una cuenta, cree una en el sitio web de Slacker (www.slacker.com) con su ordenador. Si ya tiene una cuenta de Slacker, seleccione “Sign in to your acco unt” y pulse ENTER. Aparecerá la pantalla de teclado. Puede introducir información desde el mand o a distancia o desde e[...]

SN 29401478IR US Y1212-1 *29401478IRUS*[...]

En-1 Using Internet Radio Using Internet Radio Note • Available services may vary depending on the region. • Certain network service or c ontents available through this device may not be accessible in case the service provider terminates its service. Using Multipl e Accounts The AV receiver supports mu ltiple user accounts, which means you can [...]

Using Internet Radio En-2 Last.fm is a music service that learns what you love... Your new Onkyo AV receiver is very clever. If you have a free Last.fm account, it will keep track of all the songs you’ve just pl ayed. When you visit the Last.fm website, you can see personal charts of th e music you’ve enjoyed, sh are them with friends a nd see [...]

Internetradio verwenden De-1 Internetradio verwenden Anmerkung • Die verfügbaren Dienste si nd länderabhängig verschieden. • Bestimmte Netzwerkdienste oder über dieses Gerät zur Verfügung stehende Inhalte stehen eventuell nicht zur Verfügung, falls der Service-Anbieter seine Dienstleistung beendet. Verwendung mehrerer Konten Der AV-Recei[...]

Internetradio verwenden Last.fm ist ein Musikdienst, der sich Ihre Lieblingsmusik merkt... Ihr neuer Onkyo AV-Receiver is t äußerst clever. Wenn Sie ein kostenloses Last.fm-Konto eingerichtet haben, werden darin alle kürzlich abgespielt en Titel gespeichert. Wenn Sie die Last.fm-Website besuchen, können Sie Ihre persönlichen Charts der v on Ih[...]

Remote Co ntrol Codes 1 Remote Control Codes / 1 While holding d own the REMOTE MO DE bu tton to which you want to assign a code, press and hold down [DISPLAY] (about 3 seconds). The REMOTE MODE button/ Remote indicator lights. On Integra products, button names are ca pitalized. For example , “Remote Mode” button and “Display” button. Notes[...]

Remote Co ntrol Codes 2 Codes de télécommande Códigos de cont rol remoto 1 Tout en maintenant enfoncé le bouton REMOTE MODE auquel vous souhaitez associer un code, pressez et maintenez enfoncé le bou ton [DISPLAY] (pendant environ 3 secondes). Le bouton REMOTE MODE/le témoin Remote s’allume. Les noms de boutons sont en manjuscules su r les [...]

Remote Co ntrol Codes 3 Codici del telecomando Fernbedienungscodes 1 Tenendo premuto il tasto REMOTE MODE al quale si desid e ra assegnare il codice, premer e e tenere premut o [DISPLAY] (per circa 3 secon di). Il tasto REMOTE MODE/l'indi catore Remote si acce nde. Sui prodotti Integra, i nomi dei tasti sono scri tti con l'iniziale maiu s[...]

Remote Co ntrol Codes 4 Afstandsbedieningscod es Fjärrstyrningskoder 1 Houd terwijl u de REMOTE MODE toets ingedrukt houdt waarvoor u een code wilt toewijzen de [DISPLAY] toet s ingedrukt (ongeveer 3 seconden). De toets REMOTE MODE (afstandsbed ieningsmodus) / Het indicatielampje afstandsbediening gaat branden. Op producten van Integra staan de na[...]

Remote Co ntrol Codes 5 遙控代碼 遥控代码 1 在按住想指定編碼的 REMOTE MODE （遙控模式）按鈕時，同時按住 [DISPLAY] （顯示） （約 3 秒） 。 REMOTE MODE （遙控模式）按鈕 / 遙控指示燈亮起。 在 Integra 系列產品上， 按鈕名稱為大寫。 例如， 「Remote Mode」 （遙控模式） 按?[...]

Remote Co ntrol Codes 6 Dedicated On kyo Receiver Default 62503 Zone 2 62506 Zone 3 62507 Cable Set T op Bo x ADB 02254, 02769 Aon 02769 Arris 02187 AT&T 00858 Bright House 01376, 01877 BT Vision 02294 Cable & Wireless 01 068 Cable One 01376, 0187 7 Cablecom 015 82 Cablevision 01376, 0187 7 Charter 01376, 01877, 02187 Cisco 0187 7, 00858, 0[...]

Remote Co ntrol Codes 7 AT&T 00858 BT Vision 02294 Cisco 0085 8, 02345, 02378 Kreatel 01385 Motorola 00858, 0237 8 Neuf TV 03107 Philips 02294 Scientific Atlanta 00858 SFR 03107 Verizon 0237 8 CD Advantage 70032 AH! 70157 Aiwa 70157 Arcam 70157 Atoll Electronique 70157 Audio Research 70157 Audiolab 70157 Audiomeca 70157 Audioton 70157 AVI 70157[...]

Remote Co ntrol Codes 8 Polk Audio 8222 8 Video - Accessory ADB 02254, 02769 Aon 02769 Apple 02615 AT&T 00858 BT Vision 02294 Canal+ 02657 Cisco 0085 8, 02345, 02378 Kreatel 01385 mio TV 02802 Motorola 01376, 0085 8, 01998, 02378 Neuf TV 03107 Pace 02657 Philips 02294 Scientific Atlanta 00858, 0234 5 SFR 03107 SingTel 01998, 0280 2 TeliaSonera [...]

Remote Co ntrol Codes 9 Hama 01567 Hanseatic 01100 Hirschmann 00173 Hitachi 01284 Hornet 01300 HTS 00775 Humax 01377, 01176, 01427, 01675, 0180 8, 01882, 01915, 0214 4, 02408, 02616 ID Digital 01176 ID Sat 01334 ILLUSION sat 01631 Imperial 01195, 0133 4 Indovisio n 00887 iNETBOX 01237 Inno Hit 01626 Innova 00099 inVion 02418 iotronic 01413 ISkyB 00[...]

Remote Co ntrol Codes 10 Star 00887 Stream System 01300 Strong 00853, 0 0879, 01284, 01300, 0140 9, 01626, 02418 Sunny 01300 Sunstar 00642 Supernova 00887 Supratech 01413 Systec 01334 Sytech 02418 TBoston 01251, 0 2418 Teac 01251 Technical 01626 Technika 01284 TechniSat 01100, 01195 Technosat 01206 Techwood 0 1251, 0128 4, 01626 TELE System 0 1251,[...]

Remote Co ntrol Codes 11 Akai 10178, 1 0556, 100 37, 10714, 1071 5, 10208, 11675 Akiba 10037 Akito 10037 Akura 10171, 10037, 10714, 10668, 1103 7, 11363, 11585, 1166 7, 11709 Alba 10037, 1071 4, 10668, 11037, 1158 5 Alien 11037 Allstar 10037 Amstrad 10171, 10037, 11037 Anam 10037 Anam National 10037, 10650 Andersson 11585 Anitech 10037 Ansonic 1003[...]

Remote Co ntrol Codes 12 Erres 10037 ESA 10171 ESC 10037 Euroman 1003 7 Europa 10037 Europhon 1003 7 Evesham 11248, 1166 7 Excello 11037 Exquisit 10037 Ferguson 10037, 1062 5, 10560, 10195, 1103 7, 11585 Fidelity 10171, 10037, 105 12 Finlandia 1020 8 Finlux 10556, 1003 7, 10714, 10715, 1124 8, 11667 Firstline 10556, 10037, 10714, 10668, 1103 7, 102[...]

Remote Co ntrol Codes 13 Lifetec 10037, 10714, 106 68, 11037, 1200 1 Linsar 1158 5 Local India TV 10208 Local Malaysia TV 10698 Lodos 11037 Loewe 10037, 1051 2, 11884 Logik 11037, 1069 8 Logix 1066 8 Luma 11037 Lumatron 1 0037, 1066 8 Lumenio 10037 Lux May 10037 Luxor 11037, 1 0208 LXI 10178 M Electronic 10037, 10714, 106 34, 10195, 1051 2, 11652 M[...]

Remote Co ntrol Codes 14 Phoenix 10037 Phonola 10556, 10037 Pioneer 10037, 10698, 10512, 11457, 1163 6, 12171 Plantron 10037 Playsonic 10037, 1071 4, 10715, 11652 Powerpoint 10037, 10698 Prinston 11037, 10715 Profitronic 10037 Proline 10037, 10625, 106 34, 11037 Prosonic 10037, 10714, 106 68, 11324, 1158 5, 11667, 11709, 1200 1 Protech 10037, 10668[...]

Remote Co ntrol Codes 15 Technosonic 10556, 1062 5, 10499, 11324 Techvision 11709 Techwood 1 1037, 11667 Tecnimagen 10556 Teco 10178, 10653 Tedelex 10208, 1170 9 Teknika 10150 TELE System 11585 Telecor 1003 7 Telefunken 10037, 1 0625, 10714, 10560, 1069 8, 11585, 11667 Telefusion 10037 Telegazi 10037 Telemeister 10037 Telesonic 10037 Telestar 10556[...]

Remote Co ntrol Codes 16 Technics 10556 Thomson 10625 DVD 3D LAB 30539 Accurian 30675 Acoustic Solutions 30713 AEG 30675 AFK 31152 Aiwa 30533 Akai 30675 Alba 30539, 3071 3 Ambiance 33052 Amstrad 30713 Anthem 32820 Aristona 30539, 30646 ASDA 32213 Audix 30713 Autovox 30713 Awa 32587 Basic Li ne 30713 Bel Canto Design 31571 Black Diamond 30713 Blue P[...]

Remote Co ntrol Codes 17 Radionette 30741 Radiotone 3071 3 RCA 30522, 3 0571, 322 13, 32587 REC 30490 Red 32213 Redstar 31394 Roadstar 30713 Rotel 30623 Salora 30741 Samsung 30490, 3057 3, 30199, 30820, 3163 5, 32069, 32329, 3248 9, 33195 Sanyo 30713 Schneider 30539, 30646, 30713 Schoentech 30713 Scott 31394 SEG 30713 Semp 30503 Sharp 30630, 30675,[...]

Remote Co ntrol Codes 18 Victor 31597 Yamaha 30646 Zenith 30741 HD-DVD Integra 32901, 33104 33504 LG 30741 Microsoft 3208 3 Onkyo 32901, 3 3104 33504 Xbox 32083 TV/DVD Combination Akai 11675 Black Diamond 11037, 30713 Blue Sky 11037, 30713 Bush 11037, 10698, 12719, 30713 Centrum 1 1037, 30713 Crown 11037, 30713 DMTech 12001 Dual 11037, 3 0713 Dynex[...]

Remote Co ntrol Codes 19 Memo[...]

SN 29401094A Y1303-2 *29401094A*[...]