Panasonic PT-CW330E Bedienungsanleitung

Operating Instructions Functional Manual DLP ™ Projector Commercial Use Thank you for purchasing this Panasonic Product. Before operating this product, please read the instructions carefully , and save this manual J for future use. Before using your projector , be sure to read “Read this rst!” (See pages 2 to 7). J Model No.  PT-CW330E?[...]

2 - ENGLISH Important Information Read this rst! W ARNING: THIS APP ARA TUS MUST BE EARTHED. W ARNING : T o prevent damage which may result in re or shock hazard, do not expose this appliance to rain or moisture. This device is not intended for use in the direct eld of view at visual display workplaces. T o avoid incommoding reexions at[...]

Read this rst! ENGLISH - 3 Important Information W ARNING: PO WER  The wall outlet or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur . If the following problems occur , cut off the power supply immediately . Continued use of the projector in these conditions will result in re or[...]

Read this rst! 4 - ENGLISH Important Information W ARNING: Installation work (such as ceiling mount bracket) should only be carried out by a qualied technician. If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks. Do not use anything other than an authorized ceiling mount bracket.[...]

Read this rst! ENGLISH - 5 Important Information CAUTION: PO WER  When disconnecting the power cord, be sure to hold the power plug and power connector . If the power cord itself is pulled, the lead will become damaged, and re, short-circuits or serious electric shocks will result. When not using the projector for an extended period of tim[...]

Read this rst! 6 - ENGLISH Important Information ACCESSORI ES  Do not use the old lamp unit. If used it could cause lamp explosion. If the lamp has broken, ventilate the room immediately . Do not touch or bring your face close to the broken pieces. Failure to observe this will cause the user to absorb the gas which was released when the lamp [...]

Read this rst! ENGLISH - 7 Important Information T o remove the battery Remote Control Battery 1. Press the guide and pull out the battery base. 2. Remove the battery . T rademarks HDMI, the HDMI Logo, and High-Denition Multimedia Interface are trademarks or registered trademarks of • HDMI Licensing LLC in the United States and other countr[...]

8 - ENGLISH Y ou can use the projector to view 3D videos by playing media such as Blu-ray 3 D compati ble discs on a 3D device such as a 3D Blu-ray player . Short focus lens allows you to project large images from short distance. If the presenter stands in front of the projecting board, the image of the presenter will not go into the board and the [...]

ENGLISH - 9 Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Contents Be sure to read “Read this rst!”. ( pages 2 to 7) Important Information Read this rst! ........................................... 2 Contents ..................................................... 9 Precautions for Use......[...]

10 - ENGLISH Important Information Preparation Getting Started Basic Operation Settings Maintenance Appendix Information ................................................................... 44 3D .............................................................. 45 3D ................................................................................. 45 3[...]

ENGLISH - 11 Important Information Precautions for Use Cautions when transporting When transporting the projector , be careful not to touch the mirror . z When transporting the projector , hold it securely by its bottom and avoid excessive vibration and impacts. z Doing so may damage the internal parts and result in malfunctions. Do not transport t[...]

Precautions for Use 12 - ENGLISH Important Information Do not tilt the pro ject or or place it on it s si de. J Do not tilt the projector body more than approximately ±10° vertically or ±10° horizontally . Over-tilting may result in shortening the life of the components. Cautio ns when se tting the pro jector s J Do not stack the projectors. z [...]

Precautions for Use ENGLISH - 13 Important Information Cautions on use I n ord er to get th e pi ctu re qu al ity J Draw curtains or blinds over windows and turn off any lights near the screen to prevent outside light or light z from indoor lamps from shining onto the screen. Depending on where the projector is used, heated air from an exhaust port[...]

Precautions for Use 14 - ENGLISH Important Information Accessories Make sure the following accessories are provided with your projector . Numbers in the brackets ( ) show the number of accessories. Wireless remote control unit (x1) (H458SZ01G001) Computer cable (x1) (H4200200G005) Lithium coin cell Battery CR2025 (x1) CD-ROM (x1) (H368SY01G001(B)) [...]

ENGLISH - 15 Preparation About Y our Projector Remote control (17) (16) (15) (14) (13) (12) (1 1) (18) (19) (1) (2) (4) (5) (6) (8) (7) (3) (9) (10) (1) Remote control signal emitter (2) <COMPUTER> button Switches COMPUTER 1 or COMPUTER 2 input. If either of the input is selected, press <COMPUTER> button will switch to the other one. (3[...]

About Y our Projector 16 - ENGLISH Preparation Projector body 13 1 3 2 6 7 8 9 5 10 11 12 1 12 12 12 12 4 (1) Air intake port (2) Mirror Cover (3) Remote control signal receiver (4) Air exhaust port W ARNING:  Keep your hands and other objects away from the air exhaust port . Keep your hand and face away . z Do not insert your nger . z Kee[...]

About Y our Projector ENGLISH - 17 Preparation Control Panel and Indicators 1 9 8 2 3 5 6 7 4 (1) <ON(G) / ST ANDBY(R)> indicator Indicates the projector ’s status. (2) < > button T urns the projector on/off. (3) <MENU> button T urns the main menu on/off. (4) Remote control signal receiver (5) ▲▼◄► buttons Uses to operat[...]

About Y our Projector 18 - ENGLISH Preparation Connecting terminals 2 3 4 7 6 5 10 9 1 8 ( 1) <MINI USB> For service use. (2) <HDMI IN> Input Connects to HDMI input signals. (3) <MONITOR OUT> Outputs COMPUTER 1 or COMPUTER 2 signals input to the projector . (4) <LAN> Connects to a LAN cable for network connection. (5) <S-[...]

Using Remote control ENGLISH - 19 Preparation Installing and Removing battery Press the guide and pull 1 ) out the battery base. 3 V O L T S CR2025 M 3 V O L T S CR2025 Install new battery into 2 ) the compartment. 3 V O L T S CR2025 M 3 V O L T S CR2025 Remove the old Lithium coin cell battery and install new one (CR2025). Ensure that the side wit[...]

Setting up 20 - ENGLISH Getting Started Setting up Projection method Y ou can use the projector with any of the following 4 projection methods to set the desired method in the projector . J Mounting on the ceiling and projecting forward Mounting on the ceiling J and projecting from rear (Using translucent screen) Setting on a desk/oor J and proj[...]

Setting up ENGLISH - 21 Getting Started Adjusting Projection Image Size For the setting of this projector , please refer to the following diagram or the projection distance on the next page. Attention Before installing, please read “Precautions for Use”. ( z Æ pages 1 1 to 14) Do not use the projector and the high-powered laser equipment in th[...]

Setting up 22 - ENGLISH Getting Started J Projection distance for PT -CW330E, PT -CW240E For 16:10 aspect ratio (unit: m) Q (There maybe some errors in the dimensions shown in the table below .) Projection size Throw distance A Throw distance B Projector top to Bottom of the screen Projector bottom to Bottom of the screen Diagonal (SD) Height (SH) [...]

Setting up ENGLISH - 23 Getting Started J Projection distance for PT -CX300E For 4:3 aspect ratio (unit: m) Q (There maybe some errors in the dimensions shown in the table below .) Projection size Throw distance A Throw distance B Projector top to Bottom of the screen Projector bottom to Bottom of the screen Diagonal (SD) Height (SH) Width (SW) 1.5[...]

Setting up 24 - ENGLISH Getting Started Adjusting the Projector's Height The projector is equipped with elevator feet for adjusting the image height. Extend the adjustable feet by rotating in the direction shown in the below picture and retract by rotating in the opposite direction. Spacer (Detachable) Spacer (Detachable) Adjustable feet Pull [...]

ENGLISH - 25 Getting Started Connections Before connecting to the projector Read carefully the instruction manual for the device to be connected. z T urn off the power switch of the devices before connecting cables. z If any connection cable is not supplied with the device, or if no optional cable is available for connection of the z device, prepar[...]

Connections 26 - ENGLISH Getting Started Connecting example: Computers 1 5 4 6 3 2 Active Speaker Computer Monitor (1) HDMI Cable (2) LAN Cable (3) Computer Cable (4) Stereo sound Cord (5) Stereo sound Cord (6) Computer Cable[...]

Connections ENGLISH - 27 Getting Started 2 4 6 1 5 8 7 3 Connecting example: A V equipment Audio Instrument Video deck Video deck Blu-ray disc Player DVD Player , Set-top Box, HDTV receiver DVD Player , Set-top Box, HDTV receiver (1) HDMI Cable (2) S-Video Cord (3) Stereo sound Cord (4) Mini stereo sound Cord (5) Component Video Cord (6) D-Sub Comp[...]

28 - ENGLISH Basic Operation Powering ON/OFF Basic Operation Installation J Insert the power cord holder in the holes 1 ) provided above and below the AC input terminal.  Push the power cord holder to the left to allow insertion of the power cord. Connect the strap to power cable to prevent 2 ) missing the power cord cover . Attach the power cor[...]

Powering ON/OFF ENGLISH - 29 Basic Operation ON(G)/ST ANDBY(R) indicator The ON(G)/ST ANDBY(R) indicator informs you the status of the power . Conrm the status of the <ON(G)/ST ANDBY(R)> indicator before operating the projector . Indicator status Status No illumination or ashing The power plug is not connected to the outlet. Red Lit [...]

Powering ON/OFF 30 - ENGLISH Basic Operation Powering On the Projector Connect the power plug to the power outlet. 1 ) Enter Standby status when the <ON(G)/ST ANDBY(R)> indicator is lighting / ashing in red. z Press the < 2 ) > button on the control panel or the remote control. When the <ON(G)/ST ANDBY(R)> indicator lights up i[...]

Projecting ENGLISH - 31 Basic Operation Check the connections of the peripheral devices and connection of the power cord ( Æ page 28) and switch on the power ( Æ page 30) to start the projector . Select the image and adjust the state of the image. Selecting the input signal Select an input signal. Press <INPUT> button on the control panel o[...]

V iewing 3D Images 32 - ENGLISH Basic Operation V iewing 3D Images About viewing 3D images The projector can display 3D video signals that are input by the [Frame Packing], [Side-by-Side(Half)], [T op and Bottom], [Frame Sequential] and [Field Sequential] methods. Y ou are required to prepare external devices for viewing 3D video (such as 3D eyewea[...]

On-screen Display Menus ENGLISH - 33 Settings How to operate menu Operation steps J Press <MENU> button on the remote control or on the control panel. 1 ) Main Menu displays. z Use ▲▼ to select any item in the Main Menu. 2 ) The selected item is highlighted in orange. z Press 3 ) ►. Items in the Sub Menu can be selected. z Use ▲▼ to[...]

On-screen Display Menus 34 - ENGLISH Settings Menu T ree Main Menu Sub Menu 2nd Sub Menu Default V alue Range Picture Color Mode Dynamic / PC / Movie / Game / User W all color White / Light Y ellow / Light Blue / Pink / Dark Green White Brightness 0 ~ 100 Contrast 0 ~ 100 Sharpness 0 ~ 31 Saturation 0 ~ 100 Hue 0 ~ 100 Gamma 0 ~ +3 Color T emp. Low[...]

On-screen Display Menus ENGLISH - 35 Settings Main Menu Sub Menu 2nd Sub Menu Default V alue Range Options Auto Source On / Off On Input HDMI, Computer 1,Computer 2, S-Video, V ideo Auto Power Off (Min) 0 0~120 Lamp Settings Lamp Hours Used (Normal) 0 Lamp Hours Used (ECO) 0 Lamp Life Reminder Off/On On Lamp Power Mode Normal / ECO Normal Clear Lam[...]

Picture 36 - ENGLISH Settings Picture Select [Picture] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. Color Mode There are many factory presets optimized for various types of images. Press ▲▼ to select [Color Mode]. 1 ) Press ► to dis play th e choos ing dia log 2 ) box. Press ◄► [...]

Picture ENGLISH - 37 Settings Sharpness Y ou can adjust the sharpness of the projected image. Press ▲▼ to select [Sharpness]. 1 ) Press ► to display the adjustment 2 ) dialog box. Press ◄► to adjust the setting value. 3 ) Operation Adjustment Adjustment range Press ►. Contours become sharper . Maximum value 31 Press ◄. Contours become[...]

Position 38 - ENGLISH Settings Position Select [Position] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. Aspect Ratio Use this function to choose your desired aspect ratio. Press ▲▼ to select [Aspect Ratio]. 1 ) Press ► to dis play th e choos ing dia log 2 ) box. Press ◄► to selec[...]

Position ENGLISH - 39 Settings V Position Shift the projected image position vertically . Press ▲▼ to select [V Position]. 1 ) Press ► to display the adjustment 2 ) dialog box. Press ◄► to adjust the level. 3 ) Note During Computer input signal, [V Position] can be z adjusted. Digital Zoom Adjust the magnication of the image. Magnic[...]

40 - ENGLISH Settings Setting Select [Setting] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. Language The language used in the On-Screen Menu is available in English, Germ an, Spanish, French, Ital ian, Dutch, Portuguese, Japanese, Simplied Chinese, Polish, Korean, Russian, Swedish, T r[...]

Setting ENGLISH - 41 Settings T est Pattern Use this function to display built-in test pattern when installing the projector . Press ▲▼ to select [T est Pattern]. 1 ) Press ► to display the setting dialog 2 ) box. Press ◄► to switch [On]/[Off]. 3 ) If you want to return the normal mode to the z previous image, set [T est Pattern] to [Off][...]

Audio 42 - ENGLISH Settings Audio Select [Audio] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. Mute T emporarily turn off the sound. Press ▲▼ to select [Mute]. 1 ) Press ► to display the setting dialog 2 ) box. Press ◄► to switch [On]/[Off]. 3 ) On Mute. Off Output audio. Press z[...]

Options ENGLISH - 43 Settings Select [Options] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. Auto Source Set the automatic signal search function when power on or the source of the signal being received is lost. Press ▲▼ to select [Auto Source]. 1 ) Press ► to display the setting dia[...]

Options 44 - ENGLISH Settings Lamp Power Mode J Selects desired lamp power mode under z different situations. Press ▲▼ to select [Lamp Power Mode]. 1 ) Press ► to display the setting dialog box . 2 ) Press ◄► to select the desired item. 3 ) Normal Normal brightness. ECO Lower brightness reduces the lamp power consumption and extends the l[...]

3D ENGLISH - 45 Settings Select [3D] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. 3D Use this function to set the display mode of the 3D image. Press ▲▼ to select [3D]. 1 ) Press ► to display the setting dialog 2 ) box. Press ◄► to switch. 3 ) Auto When 3D signal is input under [...]

3D 46 - ENGLISH Settings 1080p@24 Use this function to select 96Hz or 144Hz when viewing 1080p/24 signal according to the signal of the external equipment. Press ▲▼ to select [ 1 ) 1080p@24 ]. Press ► to display the setting dialog 2 ) box. Press ◄► to switch. 3 ) 96 Hz The signal of the external equipment is set to 96Hz. 144 Hz The signal[...]

LAN ENGLISH - 47 Settings Select [LAN] from the Main Menu (see “How to operate menu” on page 33) and then select the item from the Sub Menu. Note The following settings are set before the projector leaves z the factory . DHCP Off IP addres s 1 9 2 .1 6 8 .1 0 .1 0 0 Subnet Mask 25 5. 255. 25 5.0 Gateway 1 9 2 .1 6 8 .1 0 .1 DNS NONE If you want[...]

LAN 48 - ENGLISH Settings Store Save the network settings. Press ▲▼ to select [Store]. 1 ) Press ► to display the setting dialog 2 ) box. Press ▲▼ to switch [Y es]/[No]. 3 ) Press ► to execute. 4 ) Press <MENU> to exit. 5 ) Reset Return all data that has been set in the [Setting] menu to the factory defaults. Press ▲▼ to selec[...]

LAN ENGLISH - 49 Settings The projector has a network fuction, and the following operations are available from the computer using the web browser control. Setting and adjustment of the projector . z Display of the projector status. z T ransmission of an E-mail message when there is a problem with the projector . z This projector supports "Cres[...]

LAN 50 - ENGLISH Settings Computer operation via network Connec tion c an be made with w ired L AN . Howev er , c onr m to your s ystem administrator on net work set tings before chan ging any se tt ings. T urn on t he computer . 1 ) Make the net work setting according to y our s ystem administrator . 2 ) If the proje ctor set tings are the defa[...]

LAN ENGLISH - 51 Settings Main Menu description J Projector Information J Displays basic information of the projector . LAN Settings J Sets the LAN Settings of the projector and press [Save] to store settings. Attention For the security reason, do not enter any information that third party can recognize your location or name, in [Location] and z [A[...]

LAN 52 - ENGLISH Settings Projector Status and Control J Sets the projector status and adjusts Image and Audio controls. E-mail Setting J Sets E-mail Alert and SMTP Setting and Alert Condition of the projector and press [Save] to store settings. Note The E-mail function of this projector does not compatible z with the advanced SMTP server . Securit[...]

LAN ENGLISH - 53 Settings "Crestron RoomView" is a system developed by Crestron Electronics, Inc. which collectively manage and control multiple system devices connected via the network, from a computer . For details of "Crestron RoomView", refer to the Crestron Electronics, Inc. website (Provided only in English). http://www .c[...]

About indicator status 54 - ENGLISH Maintenance Maintenance About indicator status If an indicator turns on If a problem should occur inside the projector , the <TEMP> and/or <LAMP> indicators will inform you. Manage the indicated problems as follow . Attention Before you take a remedial measure, follow the procedure of switching the po[...]

ENGLISH - 55 Maintenance Maintenance/replacement Before cleaning/replacing the unit When you perform maintenance or replacement of the parts, make sure to turn off the power and disconnect z the power plug from the wall outlet. ( Æ pages 28, 30) Be sure to observe the procedure “Powering off the projector” ( z Æ page 30) when performing power[...]

Maintenance/replacement 56 - ENGLISH Maintenance Clean the air lters. 4 ) V acuum dirt and dust from the air lters. z Install the air lters. 5 ) T o install the air lters, reverse the previous steps until you hear a "click" sound. z Reset the [Filter Reminder]. 6 ) T urn on the power and perform [Cleaning up Reminder] in the [[...]

Maintenance/replacement ENGLISH - 57 Maintenance Replacing the unit Air lters J The air lter should be replaced when cleaning is ineffective. A replacement air lter unit is available separately . (service component) Contact your dealer for the optional air lters. Also, please replace the air lters together when replacing the lamp uni[...]

Maintenance/replacement 58 - ENGLISH Maintenance J Lamp unit The lamp unit is a consumable component. See "When to replace the lamp unit" about the lifespan. It is recommended to ask an authorized engineer to replace the lamp unit. Contact your dealer . Consult your dealer to purchase a replacement lamp unit. (for PT -CW330E / PT -CX300E:[...]

Maintenance/replacement ENGLISH - 59 Maintenance Replacing the Lamp unit J Attention When the projector is mounted on a ceiling, do not work with your face close to the projector . z Attach the lamp unit and the lamp cover securely . z When you experience difculty in installing the lamp, remove it and try again. If you use force to install the l[...]

T roubleshooting 60 - ENGLISH Maintenance T roubleshooting Please check following points. For details, see the corresponding pages. Problem Cause Reference page Power does not turn on. The power cord may not be connected. z — No electric supply is at the wall outlet. z — The circuit breakers have tripped. z — Is the <LAMP> indicator , &[...]

T roubleshooting ENGLISH - 61 Maintenance Problem Cause Reference page Partial, scrolling or incorrectly displayed image For computer input, press the <AUTO ADJ.> button on the remote z control or the control panel. — If you are using a Windows PC: z 1. O pen the [M y Computer ] icon, then click the [ Control Panel ] folder . 2 . Click the [...]

T roubleshooting 62 - ENGLISH Maintenance Problem Cause Reference page Messages displays Dust Filter Reminder Message: z This message displays when the projector reached the timer set in the [Filter Reminder (Hour)]. In this case, please clean the air lters or replace them. 55 Lamp W arning Message: z The lamp has reached its end of life, please[...]

Appendices ENGLISH - 63 Appendix Appendices Appendices Serial terminal The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specication, so that the projector can be controlled by a personal computer which is connected to this connector . Connection J Pin assignments and signal names J D-Sub 9-p[...]

Appendices 64 - ENGLISH Appendix Basic format J T ransmission from the computer begins with STX, then the command, parameter , and ETX are sent in this order . Add parameters according to the details of control. STX C1 C2 C3 : P1 P2 Pn ETX When sending commands without parameters, a colon (:) is not necessary . :  Basic format (with sub command)[...]

Appendices ENGLISH - 65 Appendix Control commands J When controlling the projector from a computer , the following commands are available: [Projector control command] Command Control contents Remarks PON Power [ON] POF Power [OFF] IIS INPUT selection (Parameter) VID = Video SVD = S-video RG1 = Computer 1 RG2 = Computer 2 HD1 = HDMI OSH A V mute fun[...]

Appendices 66 - ENGLISH Appendix Other terminals Pin assignments and signal names of <S-VIDEO IN> terminal J Outside view Pin No. Signal names GND (luminance signal) GND (color signal) Luminance signal Color signal Pin assignments and signal names of <COMPUTER 1 IN/COMPUTER 2 IN> J terminal Outside view Pin No. Signal names : Not assign[...]

Appendices ENGLISH - 67 Appendix PJLink protocol The net work f unction of th e projector supp or ts P JLink cl ass 1 , and the P J Link protocol c an be used to per form projec tor setting an d projector st atus quer y operatio ns from a c omputer . Control commands J The followi ng table lists t he P J Link protocol c ommands that c an be used to[...]

Appendices 68 - ENGLISH Appendix List of compatible signals The following table species the types of signals compatible with the projectors. Format : V = VIDEO, S = S-VIDEO, R = RGB, Y = YP B P R , H = HDMI Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Format Plug and play * 3 H (kHz) V (Hz) COMPUTER 1/ COMPUTER[...]

Appendices ENGLISH - 69 Appendix Mode Display resolution * 1 (dots) Scanning frequency Dot clock frequency (MHz) Format Plug and play * 3 H (kHz) V (Hz) COMPUTER 1/ COMPUTER 2 HDMI SXGA 1 280 x 1 024 63.98 60.0 108.00 R/H - - 76.97 72.0 133.00 R/H - - 79.98 75.0 135.00 R/H o o 1366x768 1 366 x 768 47.72 59.8 84.75 R/H - - SXGA+ 1 400 x 1 050 65.32 [...]

Specications 70 - ENGLISH Appendix Specications Model No. PT -CW330E PT -CX300E PT -CW240E Power supply AC 100-240 V 50/60Hz Power consumption 100 V - 240 V , 3.6 A-1.5 A, 340 W 100 V - 240 V , 3.2 A-1.3 A, 310 W Standby power consumption 0.5 W When [LAN (Standby)]/[VGA Out (Standby)]/[In Standby Mode (Audio)] are all z set to [Off]. 6.0 W Wh[...]

ENGLISH - 71 Appendix Specications Model No. PT -CW330E PT -CX300E PT -CW240E T erminals COMPUTER 1 IN/ COMPUTER 2 IN 2 set, high-density D-Sub 15p (female) [RGB signal] 0.7 V [p-p] 75 Ω (When G-SYNC: 1.0 V [p-p] 75 Ω) HD/SYNC TTL high impedance, automatic positive/negative polarity compatible VD TTL high impedance, automatic positive/negative[...]

Ceiling mount bracket safeguards 72 - ENGLISH Appendix Dimensions <Unit : mm (inch)> 367 (14.45) 357 (14.06) 133.7 (5.27) 241 (9.49) 267.6 (10.53) 231 (9.10) 186.7 (7.35) 163 (6.42) 98 (3.86) 334.7 (13.16) (From reflection mirror to cabinet rear edge) (From mirror cover to cabinet rear edge) 331.6 (13.01) 1 12.5 (4.43) 1 12.5 (4.43) 64.9 (2.5[...]

ENGLISH - 73 Appendix Index Numbers 3D ...................................................45 3D compatible signals .................... 6 9 3D Format ....................................... 46 3D Invert .........................................45 1080p@24 ...................................... 46 A About viewing 3D images ...............3 2 About Y[...]

Information for Users on Collection and Disposal of Old Equipment and used Battery These symbols on the products, packaging, and/or accompanying documents mean that used electrical and elect ronic products a nd battery should not be mixed with general household w aste. For proper treatment, recovery and recycling of old products and used battery , [...]