Panasonic TX-22LT Bedienungsanleitung

22 ˝ Diagonal LCD TV Operating Instructions TX-22L T2 Model No. TQBC 0356 F.P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT ASPECT TV/AV 1 2 3 4 5 6 7 C 8 9 0 VCR DIRECT TV REC TX-22LT2 T X - 2 2 L T 2 Please read these instruction before operating your set and retain them for future reference.[...]

2 Dear Panasonic Customer W elcome to the Panasonic family of customers. W e hope that you will have many years of enjoyment fr om your new 22 ″ Diagonal LCD TV . T o obtain maximum benefit fr om your set, please r ead these Instructions befor e making any adjustments, and r etain them for futur e r efer ence. Retain your pur chase r eceipt also,[...]

3 FOR YOUR SAFETY PLEASE READ THE FOLLOWING TEXT CAREFULL Y This appliance is supplied with a fitted three pin mains plug for your safety and convenience. A 5 amp fuse is fitted in this plug. If the fuse is replaced then the replacement fuse must be 5 amp rated and should be approved by AST A or BSI to BS1362. Check for the AST A mark or the BSI ma[...]

4 Before Operating This Set Supplied Accessories Check the accessories before installations. • Operating Instruction book (TQBC0356) • Remote Control T ransmitter (EUR51 1252) • AC Adaptor & Main Lead AC Adaptor: (N0JZHK000004) Main Lead: (K2CT3AA00001) • Batteries for the Remote Control T ransmitter (2 × R6 (UM3) size) F.P. INDEX HOLD[...]

5 Before Operating This Set Receiver Location Locate for comfortable viewing. Avoid placing where sunlight or other bright light (including reflections) will fall on the screen. Use of some types of fluorescent lighting can reduce remote control transmitter range. Adequate ventilation is essential to prevent internal component failure. Keep away fr[...]

6 Quick start Guide 1. Choose Y our Connection T ype Connection and setting up options • If connecting the TV using an RF cable only , see below . • If connecting the TV using Scart and RF cables, see page 7. • If connecting the TV to a Q-Link (or Q-Link compatible) VCR, see page 7. • If connecting the TV to a Q-Link (or Q-Link compatible) [...]

7 Quick start Guide 3. Q-Link connection of TV and VCR using Scart and RF cables RF connection Connect the AERIAL to the Aerial in socket of the VCR and on RF cable from the VCR Aerial Out socket to the TV Aerial socket ( ). Scart connection The VCR must be connected to the A V2 Scart socket of this TV using a ‘ fully wired ’ Scart cable. Note:[...]

8 Quick start Guide 4. Q-Link connection of TV , VCR and Satellite using Scart and RF cables For Q-Link to function correctly the TV , VCR and Satellite Receiver must be connected as shown in the diagram below . RF connections • Connect an RF cable to the Aerial In socket of the Satellite Receiver . • Connect an RF cable from the RF Out socket [...]

9 Quick start Guide 2 1 3 3. Switch TV ON Programmes will appear immediately if your dealer has programmed the TV for you. If the TV has not been programmed for you then Auto setup will begin, your stations will be located, sorted into order and stored ready for use. 4. Auto set up SETUP : Return to tuning menu TV/A V : T o exit AUTO SETUP IN PROGR[...]

10 Quick start Guide Prog. Position All channels No CH5 No CH5 / S4C No CH4 / CH5 No S4C No CH4 / S4C No CH4 / S4C / CH5 1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 BBC1 2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 BBC2 3 ITV ITV ITV ITV ITV ITV ITV 4 CH4 CH4 CH4 S4C CH4 CH5 SA T 5 S4C S4C SA T SA T CH5 SA T ° 6 CH5 SA T °° SA T °° 7S A T °°°° ° ° Note: ° The n[...]

11 Quick start Guide 6. Owner ID TV/AV 'STR' Button - Store Owner ID Exit Change Character You now have the opportunity to enter your details and help the police crack crime see instruction book Select character Return Owner ID PIN NUMBER : ∗∗∗∗ NAME : ∗ ∗∗∗∗∗∗∗∗∗∗∗∗∗ HOUSE NO : ∗∗∗∗∗∗∗∗[...]

12 Aspect (see page 28, 29) Sound mute (see page 13) TV/AVmode Selection (see page 13) Volume Up ( ), Down ( )/ Programme Number Up ( ), Down ( ) Volume adjustment which uses these buttons is performed after pressing Function button. (see page 14) Function button (see page 14) Store (see page 14) TV ON / Stand-by (see page 9) Headphone Jack (M3 jac[...]

13 Basic controls Direct Programme Number Selection (CH SELECT = POSITION) Y ou can select the numbers directly by pressing “ Number 0-9 ” button and the two digit Numbers by pressing “ T wo Digit ” and “ Programme Number ” buttons. Programme Number 8 ....... 8 Programme Number 12...... , 1 , 2 Direct Programme Number Selection (CH SELE[...]

14 Basic controls STR STR Volume Backlight Contrast Brightness Colour Tuning mode Balance Treble Bass Tint Sharpness 4 Recall button Press to display programme position, programme name, channel number , time, NICAM mode, ASPECT mode and programme table. 5 STR Used to store tuning and other function settings. Remote control : Stores some settings in[...]

15 REC VCR DVD PROGRAMME N STR F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT ASPECT TV/A V 1 2 3 4 5 6 7 8 9 C 0 VCR DIRECT TV REC Using the On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control as shown below to access and adjust features as desired. The PICTURE , SOUND [...]

16 Contrast Brightness Colour Sharpness Comb filter Off Colour balance Normal AI Backlight Mode Dynamic On Picture menu F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT TV/A V Picture menu 1 Press PICTURE . 2 Move to chosen menu option by using or . 3 Adjust chosen option or access chosen menu by using or . Press TV/A V at any time to go back to watch[...]

17 Picture menu Comb filter AI Mode Automatically analyses the incoming picture and processes it to give improved contrast and optimum depth of field. Y ou can change the level of each Function (Backlight, Contrast, Brightness, colour , Sharpness, colour balance, comb filter , AI, T int) for each picture menu. Picture menu mode will be memorized fo[...]

18 F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT ASPECT TV/A V 1 2 3 4 5 6 7 8 9 DIRECT TV REC 1 Press SOUND . 2 Move to chosen menu option by using or . 3 Adjust chosen option or access chosen menu by using or . Press TV/A V at any time to go back to watching TV . Some features are only available with the Ambience feature switched off. Press to sw[...]

19 Sound menu Helpful Hint ( Normalization) The ‘ N ’ key has no effect if it is pressed when menu is displayed on the screen. If the ‘ N ’ key is pressed when no menu is displayed on the screen, the user-preset original settings will be restored (this is not the factory default settings). Sound menu Bass T reble Headphone volume NICAM No s[...]

20 1 Press SET UP . 2 Move to chosen menu option by using or . 3 Adjust chosen option or access chosen menu by using or . Press TV/A V at any time to go back to watching TV . Offers a choice of signals to send to the A V2 Scart socket. Y ou can choose from the current TV programme position, the signal entering A V1or Moniter - the picture displayed[...]

21 T uning menu-overview F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT TV/A V 1 2 3 DIRECT TV REC 1 Press SET UP . 2 Move to the T uning menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or . 5 Adjust chosen option or access chosen menu by using or . Press TV/A V at any time to go back to watching T[...]

22 T uning menu Programme edit F. P. INDEX HOLD PICTURE SOUND SET UP TV/TEXT TV/A V 1 Press SET UP . 2 Move to the T uning menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or . 5 Access Programme edit by using or . 6 Move to chosen Programme position by using or . Make required change, eg: renaming[...]

23 T uning menu Renaming a programme channel Move to the Name colum. Choose the new character . The box at the bottom of the screen shows the character currently selected. Move to the next character position. Continue until renaming is done. Press STR to store the new name. Locking a programme channel Y ou may wish to lock a programme channel to pr[...]

24 T uning menu PICTURE SOUND SET UP TV/A V 1 Press SET UP . 2 Move to the T uning menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or . 5 Access Auto setup by using or . Note: • If you proceed with the next step all tuning data will be erased (all stations and their programme positions stored in[...]

25 T uning menu Manual tuning It is possible to retune an individual programme position: PICTURE SOUND SET UP TV/A V 1 Press SET UP . 2 Move to chosen menu option by using or . 3 Access T uning menu by using or . 4 Move to chosen menu option by using or . 5 Access Manual tuning by using or . 6 Select the programme position to be tunned by using or [...]

26 T uning menu Shipping condition Shipping condition allows you to reset the TV to its original condition, i. e. no channels tuned in. This is useful, for example, if you move to a different area when you will probably want the TV to tune itself to your new local stations. This can be done either through the Shipping condition menu or through the [...]

27 T uning menu 1 Press SET UP . 2 Move to chosen T uning menu option by using or . 3 Access chosen T uning menu by using or . 4 Move to chosen menu option by using or . 5 Access Owner ID by using or . If the Owner ID has previously been set, enter the PIN NUMBER (using 0 to 9 on the remote control) followed by STR to proceed, this will take you to[...]

28 Press the ASPECT ASPECT to move through the five aspect options: Panasonic Auto, 4:3, Zoom, 16:9 and 14:9. Notes: • If you leave Aspect set to Panasonic Auto, the TV software determines the best ratio for each programme viewed.In order not to disrupt your viewing, no mode information is displayed while this is happening.Simply press the ASPECT[...]

29 Aspect Controls Blue button has been pressed to move picture upwards Zoom Zoom V-POS − V-POS + Zoom V-POS − V-POS + 16 : 9 16 : 9 4:3 4:3 will display a 4:3 picture at its standard 4:3 size without any stretching. Black stripes will be visible down the left and right sides of the picture. Zoom Zoom mode magnifies the central section of the p[...]

30 Q-Link This is a Q-Link TV . Q-Link, NEXTVIEWLINK and similar technology provide a way for a TV and VCR to communicate, making it easier to record programmes. In order to be able to exchange information both the TV and the VCR must be fitted with this technology , and must be connected with a SCARTlead (full function type) between the A V2 socke[...]

31 T uning your VCR and satellite receiver Y our new TV is supplied with programme position ‘ 0 ’ set to receive an RF signal from your VCR, although a Scart connection is preferable if the VCR is so equipped (see page 6 or 36 for suitable inputs to the Scart socket on this TV .) However , if for some reason your VCR is tuned to a different RF [...]

32 Advanced Remote Control Operation VCR / DVD Operation The Remote Control is capable of operating some functions of selected Panasonic VCRs and DVD (Digital V ersatile Disc) equipment. Some VCR and DVD equipment have different functions, so to ensure compatibility please refer to the equipment's instruction book or consult your dealer for de[...]

33 Advanced Remote Control Operation TELETEXT · T eletext features may vary depending on the Broadcasting Companies and is only available if the channel selected is transmitting T eletext. · Pressing the Picture button whilst in T eletext operation will display the contrast function with a cyan bar , press or to alter the setting as required. Pre[...]

34 Advanced Remote Control Operation It is not possible to change the programme position when in News flash, Update or Sub Coded Page Access operation. List Store In List mode the four page numbers can be altered (programme positions 1 - 25 only). T o do this, press one of the four coloured buttons and enter the new page number . Press and hold STR[...]

35 Advanced Remote Control Operation 1 23 4 56 7 89 0 SET UP Blue Y ellow Sub Coded Page Access When T eletext information exceeds more than one page, it may take some time for the automatic changing of the sub pages to reach the sub page you require. It is possible to enter your required sub page and continue watching the normal programme until th[...]

36 S-VIDEO cable VIDEO AUDIO Audio OUT RL S-Video OUT Video OUT Connect the S-VIDEO or VIDEO T erminal. Input/Output from A V1 Scart Socket Scart cable Connection example: A V3 connection Connection example: A V1,2 connection Input/Output from A V2 Scart Socket Q-Link data VCR SET TOP BOX DVD PLAYER CAMCORDER GAMES CONSOLE VCR/S-VHS VCR Q-LINK COMP[...]

37 AUDIO IN L R 3.5 mm stereo plug to stereo phono lead. Connections How to connect the AUDIO OUT T erminals Note: The AUDIO OUT terminal provides a fixed level output only . (The menu settings and remote control volume controls have no effect.) Additional equipment and cables shown are not supplied with this TV set. Connecting Headphones / Earphon[...]

38 Maintenance T roubleshooting If there is a problem with your LCD TV please refer to the table below to determine the symptoms, then carry out the suggested check. If this does not solve the problem, please contact your local Panasonic dealer , quoting the model number and serial number (both found on the rear of the TV). T o clean this unit, wip[...]

39 Specifications 21 19 17 15 13 11 9 7 5 3 1 20 18 16 14 12 10 8 6 4 2 Socket Earth CVBS out (video) CVBS earth Red in Red earth Green in Green earth Blue in Blue earth Audio out (L) Audio out (R) CVBS in (video) RGB status earth Status RGB Earth - - - - Status CVBS Audio in (L) Audio earth Audio in (R) 21 19 17 15 13 11 9 7 5 3 1 20 18 16 14 12 1[...]

Customer ’ Record The model number and serial number of this product can be found on its rear panel. Y ou should note this serial number in the space provided below and retain this book, plus your purchase receipt, as a permanent record of your purchase to aid in identification in the event of theft or loss, and for W arranty Service purposes. Mo[...]