Panasonic TX-86PW200A Bedienungsanleitung

Widescreen Stereo Colour Television With Teletext Operating Instructions TX-86PW200A TX-76PW200A Operating Instructions Please read these operating instructions completely before operating this set and retain the booklet for future reference. [tau] FLA DIGI AL Dolby and the symbol are trademarks of Dolby Laboratories. Manufactured under licence fro[...]

2 Panasonic and the Environment Reduce, reuse, recycle Dear Panasonic Customer, Welcome to the Panasonic family. We hope that you will have many years of enjoyment from your new Colour Television. Thank you for choosing to buy this Panasonic Colour Television. It was assembled at our Panasonic Television factory in Penrith, Australia under an inter[...]

3 Panasonic Important Information This television lets you to prove ownership by letting you enter personal identification into it. The “Owner ID” function allows you to enter a security code and address information so that in the unfortunate event of theft it will help the Police to determine the owner. Details of setting the Owner ID are on p[...]

4 CONTENTS Getting started ..................................................................................................................................... 6 Battery Installation and Replacement .................................................................................................. 7 Control Panel and Remote Control ................[...]

5 CONTENTS Geomagnetic correction ..................................................................................................................... 22 Owner ID ........................................................................................................................................ 23 Aspect Control ...............................[...]

Panasonic Getting Started Connect the Aerial The RF (Aerial) Input impedance of this television is 75 Ω . If your aerial lead is 300 Ω ribbon (two wires separated by a flat plastic strip) you will require a 300 Ω /75 Ω Balun (not supplied) in order to connect your aerial to the television. Note: For your safety any external aerial should be[...]

Battery Installation and Replacement Open Battery Cover Place your thumb on the battery cover triangle. Apply a slight downward pressure with the thumb and slide the cover back. This allows the cover to be removed. Insert Batteries Insert the batteries ensuring the correct polarity. The polarity is identified by the “ + “ symbol on the battery [...]

Panasonic L/MONO R AUDIO S-VIDEO VIDEO AV3 IN Remote Control Operation is possible for the VCR’s and DVD’s of the various manufacturers. After completion of setting, execute the various operations by selecting the VCR or the DVD switch. Manufacturer settings 1 Select the switch of the unit to be set (VCR or DVD ) VCR DVD 2 While pressing the VC[...]

Television Control Panel Buttons BUTTON WHAT IT DOES STR F -// +// TV/AV Please refer to drawing on Page 8 for location of Remote Control Buttons. STR This button is used to store tuning information and other function settings. It is also used to start the menu demonstration. F The F button is used to select the on screen display functions. Press[...]

Remote Control Television Operation BUTTON WHAT IT DOES STANDBY The remote control button is used to turn the television into Standby mode. When the television is in Stand-By it is possible to turn it back on by pressing this remote control Power Button, the Programme Number UP or DOWN Button (front panel or remote control) or any of the direct Pro[...]

Remote Control Television Operation BUTTON WHAT IT DOES PIP (Picture In Picture) Mode Allows a small picture to be viewed inside the main picture. Pressing the Red button will switch to the PIP. The Yellow button will switch to the PAP mode. The Blue button swaps the position of the two pictures. POP (Picture Out Of Picture) Mode Allows two picture[...]

Remote Control Television Operation BUTTON WHAT IT DOES HELP Pressing this button displays on screen instructions on how to adjust various settings and how to connect external equipment. Press the HELP button and select one of the options. Please refer to page 14. SOUND MUTE Pressing this button reduces the sound from the television to nil. Pressin[...]

Please refer to drawing on Page 8 for location of Remote Control Buttons. SELECT OK EXIT 6 5 4 3 2 1 Remote Control Television Operation BUTTON WHAT IT DOES CH SEARCH This option is used to show freeze frames of the programmes being broadcast on all the stored channels. The images are displayed clockwise around the edge of the screen starting from [...]

Using The On Screen Displays Many features available on this TV can be accessed via the On Screen Display menu system. Use the remote control to access and adjust features as required. An on screen help box is displayed whenever a menu is displayed on the TV. This help box indicates which keys on the remote control are used to navigate the menu sho[...]

Picture Menu Operation Notes: 1. You can change the level for each function (Contrast, Brightness, Colour, Sharpness and NTSC-Tint) for each picture menu option. 2. Picture menu levels can be set for TV, AV1, AV2, AV3, AV4 and AV5 modes. 3. NTSC-TINT only appears when the TV is receiving NTSC signals and the television is in the AV mode. 4. Only CO[...]

Picture Menu Operation Colour temperature The Colour temperature control allows you to change the White balance setting between Standard, Warm and Cool. Use the or buttons to switch between settings. P-NR The P-NR (Picture Noise Reduction) system is designed to reduce picture noise during poor quality reception conditions. Pushing the left or right[...]

Sound Menu Operation 1 Push the SOUND button . 2 Move to the option menu using or . 3 Adjust the chosen option using or . Push at any time to return to watching TV. . MENU The MENU control allows you to change the Sound setting between Dynamic, Standard and Soft. Use the or buttons to switch between settings. Music Amplifies the low frequencies and[...]

Sound Menu Operation Dolby Virtual A Virtual Dolby Surround System attempts to create the same surround effect produced by a multi-channel system using only the left and right speakers. The general conceptual model of a Virtual Dolby Surround System divides the centre signal equally between the left and right speakers to achieve a Phantom Centre Im[...]

Set Up Menu 1 Push the SET UP button . 2 Move to the option menu using or . 3 Adjust the chosen option using or . Push at any time to return to watching TV. . Teletext This control allows you to change between TOP (or FASTEXT) and List modes. Use the or buttons to switch between settings. TOP mode is the current preferred method in Australia. FASTE[...]

Set Up menu Ch colour set Colour density varying between broadcast channels can be adjusted to three levels for each channel received. Use the or buttons to switch between settings. Child lock allows you to “lock out” a channel to prevent a child from watching or hearing a particular programme. Select the channel or AV to be locked before press[...]

Set Up menu Geomagnetic If you notice a slight tilt in the picture or if there are coloured patches at the corners of the screen, use this feature to eliminate them. Use the or buttons to access the Geomagnetic adjustment. Refer to page 22 for instructions on using the geomagnetic correction adjustment. Owner ID This television lets you to prove ow[...]

Setup menu - Geomagnetic Correction Magnetic interference may come from such things as unshielded motors, moving the TV while it is switched ON, turning off a vacuum cleaner too close to the TV, lightning strikes nearby or many other things. Slight tilting of the picture may be noticeable or coloured patches may sometimes appear at the corners of t[...]

Setup menu - Owner ID Owner ID allows you to enter a security code and address information so that in the unfortunate event of theft it will help the Police to determine the owner. Press the SETUP Button . Move to Owner ID Option or buttons. Access the Owner ID or buttons If the Owner ID has previously been set, enter your PIN followed by ‘STR’[...]

Aspect control This button is used to move through the different aspect ratios. The aspect options are Auto, 16:9, 14:9, JUST, 4:3, Zoom1 and Zoom2. Auto This option determines the best aspect ratio to use to fill your screen. If Auto detects a widescreen signal it switches into the appropriate 16:9 or 14:9 widescreen mode. 16:9 This option will di[...]

Remote Control Operation is possible for the VCR’s and DVD’s of the various manufacturers. After completion of setting, execute the various operations by selecting the VCR or the DVD switch. Manufacturer settings 1 Select the switch of the unit to be set (VCR or DVD ) VCR DVD 2 While pressing the VCR/DVD button, key in the manufacturer code set[...]

TELETEXT Operation BUTTON WHAT IT DOES F.P. (FAVOURITE PAGE) This feature will store a favourite page in the TV memory. 1. The TV must be in the LIST mode, receiving a teletext broadcast and the programme number must be between 1 and 25. 2. Push the Blue button. 3. Select the page number. 4. Push and hold the STR button. 5. The page number is now s[...]

TELETEXT Operation PAGE NUMBER BUTTONS These buttons allow you to directly enter the page number that you want to view. REVEAL Some Text pages contain concealed information, e.g. the solution to a puzzle. To reveal this information Push the Set Up button followed by the Red button. To hide the information, Push the Red button again. F/T/B (FULL / T[...]

Tuning Menu SYS Select This option allows you to switch the television system between the Australian and the New Zealand / Indonesian system. Using the Remote Control 1. Push the Set Up ( ) button. 2. Push the or button to access the Tuning Menu. 3. Push the or button to select the Tuning Menu. 4. Push the or button to select the Sys select. 5. Pus[...]

Tuning Menu Auto Tuning This television has been factory tuned to all major city channels. Use the automatic tuning procedure only if you wish to reset ALL Programme Location Numbers. Refer to “Manual tuning” on page 30 if you only want to retune one or two Programme Location Numbers. The television should be switched ON and the TV/AV Switch se[...]

Tuning Menu Manual Tuning This Television has been factory tuned to all the major city channels. Use this tuning procedure only if you wish to reset individual Programme Numbers. The television should be switched ON and the TV/AV Switch set to TV. Using the Front Panel 1. Push the button repeatedly until the Tuning Menu is reached. 2. Push the or B[...]

I n areas of poor reception or constant interference a slight adjustment to the tuning may improve the picture quality. Using the Remote Control 1. Select the Programme location number you want to fine tune. 2. Push the Set Up ( ) button. 3. Push the or button to select the Tuning Menu. 4. Push the or button to access the Tuning Menu. 5. Push the o[...]

This option allows you to “Skip” (bypass) the unused or undesired Programme Numbers. The Function is only applicable when the Programme Number Up or down buttons are Pushed. The use of the remote control Direct Programme Number Buttons overrides the Skip function. Tuning Menu Skip Using the Remote Control 1. Select the Programme location number[...]

Remote Control Operation is possible for the VCR’s and DVD’s of the various manufacturers. After completion of setting, execute the various operations by selecting the VCR or the DVD switch. Manufacturer settings 1 Select the switch of the unit to be set (VCR or DVD ) VCR DVD 2 While pressing the VCR/DVD button, key in the manufacturer code set[...]

Remote Control VCR/DVD Operation Remote Control VCR/DVD Buttons Function Button / Switch VCR DVD REWIND / REVIEW REWIND / REVIEW Used to rewind the tape Used to play the disc in quickly or watch the tape reverse while watching the in reverse. picture. STOP STOP Used to stop the VCR. Used to stop the DVD. POWER BUTTON POWER BUTTON Used to switch the[...]

Remote Control VCR/DVD Operation Manufacturers’ Code Settings This remote control has been designed to work with a variety of VCRs and DVD players. In order for this to occur, the setting for the VCR or DVD must be programmed into the Remote Control. 1. To set a VCR, slide the remote control VCR-DVD switch to VCR. To set a DVD, slide the remote c[...]

Connecting Equipment to the TV Front Panel Connections Headphones Use stereo headphones with 3.5mm Plug (Not included). When a headphone plug is inserted into the headphone socket the internal speakers will still operate. If someone has trouble hearing the television they can use the headphones and set the volume to a level they are comfortable wit[...]

Connecting Equipment to the TV Rear Panel Connections When using a VCR with the television always connect the Aerial to the VCR and connect an RF Cable (not supplied) between the VCR RF-Out and the television RF-In. You can watch videos by either tuning the television to the VCR (see page 30) or by connecting the VCR to the rear AV terminals. Note:[...]

Connecting Equipment to the TV Connecting a Standard VCR to the AV Input Most standard Video Cassette Recorders use RCA type video and audio connectors. If your VCR has different type connectors please refer to the VCR instruction book for details. VCRs can be connected to any of the AV inputs but we recommend that you use AV5 leaving the other inp[...]

Customer Information - Warnings and cautions To keep your Panasonic Television in good working order please observe the following warnings and cautions. Please be careful with this television. Like all electrical equipment it can cause serious injury or damage if it is mistreated. Danger Do not insert foreign objects. (Keep metal or easily inflamma[...]

Customer Information Cleaning the Television Cabinet and Picture Tube Care The cabinet and picture tube can be kept in good condition by wiping with a clean, lint free cloth moistened with mild detergent and water. For safety, remove the plug from the power outlet when cleaning. Do not spray insecticide or volatile solvent on the TV. Do not allow r[...]

Customer Information Frequently Asked Questions Some minor problems can be corrected very quickly and easily without the cost of a service call. Panasonic has a Customer Care Centre which can answer most questions over the phone. Before you contact the Customer Care Centre with your question we have included the most commonly asked questions. Quest[...]

Troubleshooting Before calling for service, determine the symptoms and make a few simple checks as shown below. Picture Sound Check Aerial Location, Direction or Connections. If you are watching a tape playback check the state of the Video heads – they may need to be cleaned or replaced. The tape may be old. Check the tracking. Aerial Location, D[...]

Specifications Tuning System Frequency synthesized 100 Position ( 0 to 99 ). RF Channels VHF 0 to 12 PAL B UHF 21 to 69 PAL G S’1 to S’3 HYPER TUNER S1 to S41 Receiving Systems 1. PAL B/G Reception of Off air broadcasts Playback from Video Tape Recorders 2. NTSC 4.43 Playback from Special Video Tape 3. NTSC 3.58 Recorders and Special Video Disc[...]

Printed in Australia TQB4A0162 care Customer centre Panasonic 132600 Panasonic AVC Networks Australia Pty. Ltd. P.O. Box 326 Penrith NSW 2751 ABN: 25 000 611 389 Certified to International Quality Standard AS/NZS ISO9001 Certified to International Environmental Standard AS/NZS ISO14001 Distributed in New Zealand by Panasonic New Zealand Limited 350[...]