Patton electronic 4020 Series Bedienungsanleitung

Smar tLink 4020 Smar tLink Analog V oIP SoHo Router Getting Star ted Guide Sales Office: +1 (301) 975-1000 T echnical Support: +1 (301) 975-1007 E-mail: support@patton.com WWW : www .patton.com Document Number: 09402U1-001 Rev . C Part Number: 07MSL4020-GS Revised: November 10, 2005[...]

Patton Electronics Company , Inc. 7622 Rickenbacker Drive Gaithersburg, MD 20879 USA T el: +1 (301) 975-1000 F ax: +1 (301) 869-9293 Support: +1 (301) 975-1007 W eb: www .patton.com E-mail: support@patton.com T rademark Statement The terms SmartL ink, SmartN ode, SmartW ar e, and SmartV iew are trademarks of P at- ton Electronics Company . All othe[...]

3 Summar y T able of Contents 1 General information ...................................................................................................................................... 19 2 SmartLink installation ................................................................................................................................... 21 [...]

4 T able of Contents Summary Table of Contents ........................................................................................................................... 3 Table of Contents ........................................................................................................................................... 4 List of Figures .[...]

5 SmartLink 4020 Getting Started Guide Table of Contents Enabled .....................................................................................................................................................29 Service .............................................................................................................................[...]

6 SmartLink 4020 Getting Started Guide Table of Contents ToS/DiffServ .........................................................................................................................................................35 Saving your work ...........................................................................................................[...]

7 SmartLink 4020 Getting Started Guide Table of Contents Port Forwarding ....................................................................................................................................................43 Reserved Ports ...............................................................................................................[...]

8 SmartLink 4020 Getting Started Guide Table of Contents Stun Server IP ...........................................................................................................................................53 Stun Server Port .......................................................................................................................[...]

9 SmartLink 4020 Getting Started Guide Table of Contents Selective Call Forward Settings .......................................................................................................................59 Incoming caller #1–8 ....................................................................................................................[...]

10 SmartLink 4020 Getting Started Guide Table of Contents Ring Back Tone ........................................................................................................................................70 Off Hook Warning .........................................................................................................................[...]

11 SmartLink 4020 Getting Started Guide Table of Contents Ring Setting ....................................................................................................................................................76 Ring Waveform ..................................................................................................................[...]

12 SmartLink 4020 Getting Started Guide Table of Contents Shipping instructions ................................................................................................................................88 A Compliance information ..................................................................................................................[...]

13 List of Figures 1 SmartLink 4020 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 2 SmartLink 4020 installation diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22 3 Router front[...]

14 SmartLink 4020 Getting Started Guide List of Figures 48 FXS Port Polarity Configuration section of Localization window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 49 Ring Setting section of Localization window . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76 50 [...]

15 List of T ables 1 General conventions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18 2 Bellcore standard ring cadence patterns . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71 3 Calling fea[...]

16 About this guide This guide describes using the S martLink 4020 router . Audience This guide is intended for the following users: • Operators • Installers • Maintenance technicians Structure This guide contains the following chapters and appendices: • Chapter 1 on page 19 provides information about r outer features and capabilities • C[...]

17 SmartLink 4020 Getting Started Guide About this guide Precautions N otes, cautions, and warnings, which have the following meanings, ar e used throughout this guide to help you become aware of potential problems. W arnings are intended to prev ent safety hazards that could r esult in per- sonal injury . Cautions are intended to prev ent situatio[...]

18 SmartLink 4020 Getting Started Guide About this guide General observations • Clean the case with a soft slightly moist anti-static cloth • Place the unit on a flat surface and ensure free air cir culation • A void exposing the unit to direct sunlight and other heat sources • P rotect the unit from moistur e, vapors, and corrosive liquid[...]

19 Chapter 1 General information Chapter contents SmartLink 4020 overview ......................................................................................................................................20[...]

SmartLink 4020 overview 20 SmartLink 4020 Getting Started Guide 1 • General information SmartLink 4020 over view The S martLink V oIP SoHo R outer (see figure 1 ) pro vides transparent connectivity for analog phones and fax es to the world of Internet voice. Connecting to any analog phone, fax or PBX, the S mar tLink product is an effective and [...]

21 Chapter 2 Smar tLink installation Chapter contents Installing the router ...............................................................................................................................................22[...]

Installing the router 22 SmartLink 4020 Getting Started Guide 2 • SmartLink installation Installing the router Do the follo wing: Figure 2. S martLink 4020 installation diagram Note F or proper ventilation, leave at least 2 inches (5 cm) of clearance at the sides, front, and rear of the unit. Place the unit on a desktop or similar sturdy , flat [...]

Installing the router 23 SmartLink 4020 Getting Started Guide 2 • SmartLink installation Note The S martLink has automatic MDX (auto-crossover) detection and configu- ration on all Ethernet ports. Any of the ports can be connected to a host or hub/switch with a straight-through wired cable. Note F ollow the directions of your v oice service prov[...]

24 Chapter 3 Home Chapter contents System information ...............................................................................................................................................25 System Uptime ........................................................................................................................................[...]

System information 25 SmartLink 4020 Getting Started Guide 3 • Home System information Figure 4. SmartLink V oIP download and configuration Home page System Uptime Sho ws how long the S martLink 4020 has been operating since the last time it was reloaded (either by po wering the unit off and then on again, or by selecting System > Reload ). W[...]

System Status 26 SmartLink 4020 Getting Started Guide 3 • Home Application V ersion The S martLink firmware version number . Config Date The date of the configuration file that was downloaded from an auto-upgrade server . Security Indicates that the S mar tLink web interface utility has been secured with a password. T o configure a password,[...]

27 Chapter 4 Network—W AN Chapter contents Status .....................................................................................................................................................................29 Interface Status .................................................................................................................[...]

28 SmartLink 4020 Getting Started Guide 4 • Network—WAN WAN Priority Tag (IEEE 802.1q) ............................................................................................................34 Saving your work ...................................................................................................................................[...]

Status 29 SmartLink 4020 Getting Started Guide 4 • Network—WAN Status Sho ws the status of key W AN network settings as configured under W AN settings Interface Status Figure 5. Internet Status window Enabled Ye s indicates the W AN interface is enabled and ready to be used. Ser vice Either Routed or Bridged , displays whether the S mar tLink [...]

Settings 30 SmartLink 4020 Getting Started Guide 4 • Network—WAN MAC address The MAC address of the W AN Ethernet interface in the S martLink. Subnet Mask The subnet mask is 32-bit number that filters a destination IP address to determine to which subnet it belongs. F or example, a subnet mask of 255.255.0.0 for a network ID of 192.5.0.0 tells[...]

Settings 31 SmartLink 4020 Getting Started Guide 4 • Network—WAN Internet Configuration Figure 6. Internet Configuration section of the Settings window Device Operating Mode Choose Router or Bridged depending on your operation. Obtain W AN configuration dynamically Select this option if appropriate. I f you choose Obtain W AN configuration [...]

Settings 32 SmartLink 4020 Getting Started Guide 4 • Network—WAN W AN PPPoE Configuration Figure 7. W AN PPPoE Configuration section of the Settings window Enable PPPoE Select Ye s to enable PPP oE or No to disable PPP oE. Authentication Enter the username and password pr ovided by y our ISP . Settings Idle T imeout. Idle timeout befor e PPP [...]

Settings 33 SmartLink 4020 Getting Started Guide 4 • Network—WAN found using a fixed DNS name when the IP address changes. With Dynamic DNS cable modem and ADSL users can be found on the Internet using a DNS name. The DNS server used for registration is operated by Dynamic N etwork S ervices, Inc., Dynamic DNS (DynDNS). Y ou can find detailed[...]

Settings 34 SmartLink 4020 Getting Started Guide 4 • Network—WAN MTU Size Figure 10. MTU section of the Settings window MTU (Maximum T ransfer Unit) Size The size limit (bytes) of the packet for all outgoing packets. W AN VLAN Configuration The S martLink 4020 can mark outgoing Ethernet frames on the W AN interface with VLAN and priority tags.[...]

QoS (Quality of Service) 35 SmartLink 4020 Getting Started Guide 4 • Network—WAN QoS (Quality of Service) Figure 12. QoS window Enable V oice QoS Enable or disable the voice quality of service function. When QoS is enabled, the S martLink 4020 will priori- tize and rate-limit the introduction of voice and data traffic onto the W AN interface. [...]

IPSec Configuration 36 SmartLink 4020 Getting Started Guide 4 • Network—WAN Saving your work When you are finished configuring T oS/DiffServ settings, click the Save T oS/D iffServ Settings button to save the changes. IPSec Configuration This page allows configuration of the device ’ s IPSec (IP security) settings. Figure 14. IPSec Confi[...]

IPSec Configuration 37 SmartLink 4020 Getting Started Guide 4 • Network—WAN Outbound AH Authentication Algorithm HMAC-MD5 or HMA C-SHA1 Outbound AH Authentication Key (HEX) Hex number up to 40 nibbles Outbound ESP SPI (DEC) Outbound ESP security parameter index number Outbound ESP Encryption Algorithm 3DES-CBC or DES-CBC Outbound ESP Authentica[...]

IPSec Configuration 38 SmartLink 4020 Getting Started Guide 4 • Network—WAN Inbound ESP Authentication Key (HEX) Hex number up to 40 nibbles Saving your work When you are finished configuring tunnel settings, click the Sav e T unnel Settings button to save the changes.[...]

39 Chapter 5 Network—LAN Chapter contents Settings ..................................................................................................................................................................40 Network Settings ...................................................................................................................[...]

Settings 40 SmartLink 4020 Getting Started Guide 5 • Network—LAN Settings Figure 15. Network Settings window Network Settings Enter the IP address and subnet mask of your LAN network. Saving your work When you are finished, click the Sav e Settings button to save the changes. DHCP These configuration parameters are for the S martLink 4020’ [...]

DHCP 41 SmartLink 4020 Getting Started Guide 5 • Network—LAN Server Settings Select Ye s to enable or No disable DHCP . When enabled, the S mar tLink 4020 will act as a DHCP server to devices connected to the S martLink 4020 LAN por t. Client IP Address Range Minimum and maximum limits on the range of IP addresses that will be allocated b y DHC[...]

Routing 42 SmartLink 4020 Getting Started Guide 5 • Network—LAN Routing These configuration parameters are for the internal router . Note These parameters only apply when the Device Oper ating Mode is set to Router (see section “Device Operating M ode” on page 31). Figure 18. Router Configuration window Dynamic Routing Whether or not dyna[...]

Port Forwarding 43 SmartLink 4020 Getting Started Guide 5 • Network—LAN Port For warding Figure 20. Port For warding Configuration window Reserved Por ts S pecifies reserved ports that cannot be for warded to the LAN. Port For warding to LAN In this section, you enter the specifications, which y ou will be forwarding to the LAN, including po[...]

IP Filtering 44 SmartLink 4020 Getting Started Guide 5 • Network—LAN Filter IP Range A computer having an IP address that falls within the specified IP address range will not be allo wed to access the W AN interface. T ypically this is used to block access to the Internet Saving your work When you are finished configuring settings, click the[...]

45 Chapter 6 T elephony Chapter contents VoIP Status ...........................................................................................................................................................48 VoIP Server Registration Status ...........................................................................................................[...]

46 SmartLink 4020 Getting Started Guide 6 • Telephony Audio/CODEC Configuration ..............................................................................................................................54 CODECS ....................................................................................................................................[...]

47 SmartLink 4020 Getting Started Guide 6 • Telephony Outgoing Call Block .......................................................................................................................................60 Digit Pattern ..........................................................................................................................[...]

VoIP Status 48 SmartLink 4020 Getting Started Guide 6 • Telephony V oIP Status Figure 22. V oIP Status window V oIP Ser ver Registration Status Current Ser ver Sho ws the current V oIP ser ver that has been pre-defined or has been discov ered using DNS service records (DNS-SR V ). Domain The V oIP domain name is the domain name that is hosting t[...]

SIP 49 SmartLink 4020 Getting Started Guide 6 • Telephony • N o Registration —The S martLink 4020 is not attempting to register with the SIP server because “Send Registration R equest” is not checked on SIP sever setting scr een. • Error: N ot Authorized —A SIP final status message status of 401 or 407 has been received fr om the SIP[...]

SIP 50 SmartLink 4020 Getting Started Guide 6 • Telephony SIP Configuration Figure 23. SIP Configuration section of the SIP window SIP Ser ver Settings The S martLink 4020 will automatically attempt to locate the V oIP ser ver by using the domain name specified in the W AN interface or the server will be discovered via DHCP on the W AN interfa[...]

SIP 51 SmartLink 4020 Getting Started Guide 6 • Telephony SIP Extensions Figure 25. SIP Extensions section of the SIP window Support PRACK method Select to enable SIP pro visional acknowledgement (PRA CK) support as defined in RFC 3262. Encode SIP URI with user parameter Select to encode user=phone parameter in SIP URI. Send INVITE with T imer h[...]

SIP 52 SmartLink 4020 Getting Started Guide 6 • Telephony Figure 27. V oIP VLAN Configuration section of the SIP window SIP Parameters Figure 28. SIP Parameters section of the SIP window Hook Flash MIME T ype This is the MIME T ype to be used in a SIP INFO message used to signal hook flash event. SIP T imer V alues (milliseconds) SIP T1. RFC 32[...]

SIP 53 SmartLink 4020 Getting Started Guide 6 • Telephony NA T T raversal Figure 29. NA T T raversal section of the SIP window Outbound Proxy IP T ype the fully qualified domain name for the outbound proxy server , or type the IP address pro vided by your service provider . Outbound Proxy Port T ype the outbound proxy IP port number pro vided by[...]

Audio/CODEC Configuration 54 SmartLink 4020 Getting Started Guide 6 • Telephony Audio/CODEC Configuration Figure 30. Audio/CODEC Configuration window CODECS • Selected column: Check the codecs that are acceptable to use • Silence S uppr ession column: Specifies whether silence suppr ession should be turned on in the S martLink 4020. • P [...]

Phone 1 & Phone 2 55 SmartLink 4020 Getting Started Guide 6 • Telephony F AX without T .38 (Use G.711 fax) When checked, T .38 is disabled and the SL4020 will not attempt T .38 session negotiation for fax transmissions initiated by the originator of the fax. The fax transmissions will be transported using G.711 fax pass-through. The selection[...]

Phone 1 & Phone 2 56 SmartLink 4020 Getting Started Guide 6 • Telephony User Information Figure 31. User Information section of Phone 1 or Phone 2 window Phone Number Enter the telephone number or the user part of the SIP registration. User Name Enter the user name that will be used for validation of the V oIP SIP registration or call invitat[...]

Phone 1 & Phone 2 57 SmartLink 4020 Getting Started Guide 6 • Telephony Figure 32. Supplementar y Ser vice Settings section of Phone 1 or Phone 2 window Call For ward All Enable call forward all service—All received calls will be forwarded to the destination specified under the call forwarding settings. Selective Call For ward Enable call [...]

Phone 1 & Phone 2 58 SmartLink 4020 Getting Started Guide 6 • Telephony Call For ward on Busy Enable call forward on busy service. Conditional Call For ward Enable call forward selective service. Call W aiting Enable call waiting service. Anonymous Call Reject Enable block anonymous calls service—When enabled, calls from anonymous callers w[...]

Phone 1 & Phone 2 59 SmartLink 4020 Getting Started Guide 6 • Telephony W arm Line Number Input the number for W arm Line function—The warm line function pro vides a delay period after the tele- phone goes off-hook for the user to dial a number different than that specified for the warm line. If the delay period has expired with no number [...]

Phone 1 & Phone 2 60 SmartLink 4020 Getting Started Guide 6 • Telephony Incoming Call Block Figure 36. Incoming Call Block section of Phone 1 or Phone 2 window Block Caller ID S pecify a Caller ID for call block. Outgoing Call Block Outgoing call block allows for the blocking of an outbound call based on the digit pattern dialed. F or example[...]

Speed Dial 61 SmartLink 4020 Getting Started Guide 6 • Telephony Speed Dial Figure 39. Speed Dial window Line 1 Speed Dial Settings Speed Dial Ser v Enable S peed Dial S ervice. Speed Dial 1–8 Phone Number/IP Dialing T arget 1–8 phone number (or URL) assigned to speed dial. Line 2 Speed Dial Settings Speed Dial Ser v Enable S peed Dial S ervi[...]

62 Chapter 7 System Chapter contents Set Security Password ............................................................................................................................................65 Web Page Protect ...................................................................................................................................[...]

63 SmartLink 4020 Getting Started Guide 7 • System Speed Dialing ............................................................................................................................................73 Income Caller ID ...........................................................................................................................[...]

64 SmartLink 4020 Getting Started Guide 7 • System Write Community ....................................................................................................................................78 SNMP System Configuration ........................................................................................................................[...]

Set Security Password 65 SmartLink 4020 Getting Started Guide 7 • System Set Security Password Figure 40. Set Security Password window T wo lev els of system configuration are available: user level and system lev el. Access to each level is password controlled. W eb Page Protect Enable or disable web access protection. When set to YES , a passwo[...]

Configuration 66 SmartLink 4020 Getting Started Guide 7 • System Confirm new password Re-enter the passwor d for confirmation. Saving your work When you are finished configuring security settings, click the Sav e Settings button to save the changes. Configuration Figure 41. Configuration window Logging Enable Syslog Enable or disable system[...]

Configuration 67 SmartLink 4020 Getting Started Guide 7 • System Enable Debug Enable or disable System D ebug. Debug Ser ver The debug server IP address and port. This specifies the ser ver for logging SmartLink 4020 debug information. Debug information can be sent to a syslog server . A sample record of debug output is sho wn below: SYSLOG 07-0[...]

Service Access 68 SmartLink 4020 Getting Started Guide 7 • System Service Access Figure 42. Ser vice Access window Enable HTTP When checked access to the web configuration interface (HTTP) of the SmartLink 4020 through the W AN interface port is enabled. Note If the Enable HTTP option is not checked, your W AN ser vice provider will no longer be[...]

Localization 69 SmartLink 4020 Getting Started Guide 7 • System Call Progress T ones The dialtone, confirmation, busy , ringback and offhook warning call progress tones that ar e played to the handset can be set manually or the tones will be set automatically to the country specified under Call ID method if the checkbox, Call P rogr ess T ones [...]

Localization 70 SmartLink 4020 Getting Started Guide 7 • System Busy T one Played when a 486 RSC is receiv ed for an outbound call. Ring Back T one Played for an outbound call when the far end is ringing. Off Hook W arning Played when the subscriber does not place the handset on the cradle properly . Distinctive Ring Setting 1–8 The S martLink [...]

Localization 71 SmartLink 4020 Getting Started Guide 7 • System Timeval ::= time in milliseconds Repeatval ::= # of cycles to repeat Tonename ::= "RING_0" | "RING_1" | "RING_2" | "RING_3" | "RING_4" | "RING_5" | "RING_6" | "RING_7" | "RING_8" | "RING_9&[...]

Localization 72 SmartLink 4020 Getting Started Guide 7 • System Figure 45. Supplementar y Ser vice Keys section of Localization Window Call for ward All Enables or disables the unconditional call forwarding feature. Call for ward on Busy Enables or disables the call forwarding on busy feature. Call for ward selective Enables or disables the call [...]

Localization 73 SmartLink 4020 Getting Started Guide 7 • System Speed Dialing Enables or disables the speed dialing feature. Income Caller ID Enables or disables the display of incoming caller ID feature. Self Caller ID Block Enables or disables the blocking of transmission of caller ID feature for outgoing calls. Calling Prefix Keys Calling P r[...]

Localization 74 SmartLink 4020 Getting Started Guide 7 • System *7123019751000 and on-hook the phone. When 2 is pressed on the telephone key pad, 3019751000 will be called. Call For ward All Configures the number to unconditionally forward all calls to. T o configure call forward all enter the calling prefix key ( *73 is the factory default), [...]

Localization 75 SmartLink 4020 Getting Started Guide 7 • System tone after entering the calling prefix key . Before using, call forward busy must be enabled using the activate sequence defined in the supplementary ser vice table. Example: *743019751000 and on-hook the phone. All calls received will forward to 3019751000 when the phone is busy .[...]

Localization 76 SmartLink 4020 Getting Started Guide 7 • System Interdigit T imer The number of seconds the S martLink 4020 will wait for the caller to input a subsequent digit of the dialed number . If the timer value is exceeded before the dial plan is matched (see section “Gateway S ettings ” on page 50), the busy tone will be played to th[...]

SNMP Configuration 77 SmartLink 4020 Getting Started Guide 7 • System Ring Frequency S pecify the ring tone frequency . Ring V oltage S pecify the ring tone voltage. FXS Port Polarity Configuration Figure 50. FXS Port Polarity section of Localization window Idle Polarity P olarity before call connected. Caller Conn Polarity P olarity after outbo[...]

Auto Upgrade 78 SmartLink 4020 Getting Started Guide 7 • System SNMP Community Configuration Read Community The community name used by the SNMP manager when reading SNMP data items from a client MIB. The default value is public . W rite Community The community name used by the SNMP manager when setting SNMP data items in a client ’ s MIB. The [...]

Manual Upgrade 79 SmartLink 4020 Getting Started Guide 7 • System Enable Auto Upgrade Enable or disable auto upgrade—If enabled, the S mar tLink 4020 will automatically check the upgrade ser ver on a periodic basis for new system firmware and software upon r eload or power cy cle. Auto Upgrade Protocol Select the protocol for auto upgrade Upgr[...]

Reload 80 SmartLink 4020 Getting Started Guide 7 • System Reload Figure 54. Reload window Chose the Reload and execute Main A pplication option, for execution of the main application which you have configure, once you r eload the system. Chose the Reload and execute Do wnloader A pplication option, to being downloading, once you reload the syste[...]

81 Chapter 8 Documentation Chapter contents Introduction ..........................................................................................................................................................82[...]

Introduction 82 SmartLink 4020 Getting Started Guide 8 • Documentation Introduction Clicking the Documentation link (see figure 55 ) connects to the P atton website to display the most current ver- sion of the SmartL ink 4020 Getting S tarted Guide in por table document format (PDF). Figure 55. Documentation link[...]

83 Chapter 9 Logout Chapter contents Introduction ..........................................................................................................................................................84[...]

Introduction 84 SmartLink 4020 Getting Started Guide 9 • Logout Introduction Clicking Logout (see figure 56 ) displays Logout—Sur e to Logout? . If you want to exit from the S mar tLink management utility , click the Logout button (see figure 56 ). Figure 56. Logout window Y ou will be returned to the password verification page (see figure [...]

Introduction 85 SmartLink 4020 Getting Started Guide 9 • Logout[...]

86 Chapter 10 Contacting Patton for assistance Chapter contents Introduction ..........................................................................................................................................................87 Contact information ................................................................................................[...]

Introduction 87 SmartLink 4020 Getting Started Guide 10 • Contacting Patton for assistance Introduction This chapter contains the following information: • “Contact information ” —describes how to contact P atton technical support for assistance. • “W arranty Service and Returned Mer chandise Authorizations (RMAs)” —contains inform[...]

Warranty Service and Returned Merchandise Authorizations (RMAs) 88 SmartLink 4020 Getting Started Guide 10 • Contacting Patton for assistance Out-of-warranty ser vice P atton ser vices what we sell, no matter how you acquir ed it, including malfunctioning products that are no longer under warranty . Our products have a flat fee for r epairs. U n[...]

89 Appendix A Compliance information Chapter contents Compliance ...........................................................................................................................................................90 EMC Compliance: ...............................................................................................................[...]

Compliance 90 SmartLink 4020 Getting Started Guide A • Compliance information Compliance EMC Compliance: FCC P ar t 15, Class B EN55022, Class B EN55024 Safety Compliance EN60950-1 Radio and TV Inter ference The S martLink router generates and uses radio frequency energy , and if not installed and used properly-that is, in strict accordance with [...]

91 Appendix B Specifications Chapter contents Voice Connectivity ................................................................................................................................................92 Connectivity ............................................................................................................................[...]

Voice Connectivity 92 SmartLink 4020 Getting Started Guide B • Specifications V oice Connectivity 2-wire Loopstart, RJ-11/12 Short haul loop 1.1 km @3REN Caller-ID T ype-1/2 FSK and ITU V .23/Bell 202 generation Connectivity 2 10/100 F ull Duplex/A utosensing Ethernet RJ-45 V oice Pr ocessing (signalling dependent) SIP MGCP • P acket Cable NCS [...]

Voice Services/Features 93 SmartLink 4020 Getting Started Guide B • Specifications V oice Services/Features Call forwarding Call transfer Call hold Call waiting 3-way calling IP Services IPv4 router; RIPv1, v2 (RFC 1058 and 2453) IP filtering NAPT NTP DHCP client & server PPP oE IPSEC VPN P rogrammable static routes ICMP redirect (RFC 792); [...]

94 Appendix C Dial plans Chapter contents Introduction ..........................................................................................................................................................95 Sample Dial Plans ........................................................................................................................[...]

Introduction 95 SmartLink 4020 Getting Started Guide C • Dial plans Introduction The MGCP and SIP code will allow pro visioning (via web bro wser) of the dial plan. A dial plan gives the unit a map to determine when a complete number has been entered and should be passed to the SIP server or gate- keeper for resolution into a destination IP addre[...]

Sample Dial Plans 96 SmartLink 4020 Getting Started Guide C • Dial plans • 2-digit star services (e.g. 69) • 10-digit long distance prefixed b y 91 • International numbers starting with 9011+variable number of digits. Dial plan for this is: (0T|00T|[3-5]xxx|8xxxxxxx|*xx|91xxxxxxxxxx|9011x.T)[...]

97 Appendix D Calling Features Chapter contents Introduction ..........................................................................................................................................................98[...]

Introduction 98 SmartLink 4020 Getting Started Guide D • Calling Features Introduction The S martLink 4020 family supports advanced calling features that can be turned on and off from phones attached to the S martLink 4020 (see table 3 ). Note Y our telephony ser vice provider must enable your service for these calling features to work. Note F in[...]