Pentax 20817 Bedienungsanleitung

smc PENTAX-FA INTERCHANGEABLE LENS OPERATING MANUAL 50 15 8 10 3 2 A 22 16 11 8 5.6 4 2.8 1.4 FA lens-Cover.indd 1 FA lens-Cover.indd 1 2008/09/26 15:39:18 2008/09/26 15:39:18[...]

Foreward Thank you for purchasing the smc PENTAX lens. This operating manual applies to all of the smc PENTAX FA and FA J lenses. Please also read your camera's operating manual. * In this manual, the "smc PENTAX - FA lens" is referred to as "FA lens" and the "smc PENTAX - FA J lens" as the "FA J lens". [...]

USING YOUR LENS SAFETY 1 Although we have carefully designed these lenses for safe operation, please pay special attention to items marked with the following symbols when using this product. WARNING This symbol indicates precautions that if not followed, could result in serious injury to the user. CAUTION This symbol indicates precautions that if n[...]

2 WARNING • Never look at the sun through the lens or camera. Serious damage to the retina, or total loss of eyesight may occur. • Wrapping the strap around your neck is dangerous. Make sure that small children do not get the strap caught around their neck. (A strap is supplied only with some large types of lenses) CAUTION • Do not leave the [...]

PRECAUTIONS AND LENS MAINTENANCE 3 1. Storage and mildew prevention • Take the lens out of the protective case or camera bag, and store it in a dry, well-ventilated place. • Avoid storing the lens in a poorly ventilated location such as a closet, ward- robe, drawer, vehicle, or where insect repellent or medicine is kept. • Avoid storing the l[...]

4 5. Avoid subjecting the lens to rapid changes in temperature, otherwise con- densation may occur on both the inside and the outside of the lens. Put the lens in a plastic bag or camera bag, and take it out after the lens has reached ambient temperature. 6. When the lens is not attached to the camera body, attach both the provided lens cap and len[...]

CONTENTS 5 PRECAUTIONS AND LENS MAINTENANCE …………………………… 3 About the smc PENTAX-FA/FA J Lens …………………………………… 7 • About the zoom ring ………………………………………………………… 9 Changing the Lens …………………………………………………………… 10 Finger [...]

6 Lens Hood …………………………………………………………………… 20 • Note: ………………………………………………………………………… 20 • Compatible Lens Hoods …………………………………………………… 21 • Attaching a Round Lens Hood ………………………………[...]

About the smc PENTAX-FA/FA J Lens 7 50 15 8 10 3 2 A 22 16 11 8 5.6 4 2.8 1.4 Focusing ring Aperture ring Distance scale Front-ring threads Depth-of-field scale Aperture A-lock button [Single Focal Length Lens] FA lens-Body.indd 7 FA lens-Body.indd 7 2008/09/30 17:02:35 2008/09/30 17:02:35[...]

8 Foc u sing ring Distance scale Zoom ring Apert u re ring (note) Apert u re A-lock bu tton Apert u re index {short focal length} Apert u re index {long focal length} Note: T h e following lenses do not have an aperture ring: FA J 18-35mm f/4-5.6AL, FA J 28-80mm f/3.5-5.6AL, and FA J 75- 300mm f/4.5-5.8AL. The aperture is controlled at the A [Auto][...]

9 A zoom lens has two rings: The focusing ring at the front of the lens and the zoom ring behind it. Turn the zoom ring to obtain the desired angle of view (focal distance). * Whenever you turn the zoom ring to change the angle of view (focal distance), the focus may also change slightly. First turn the zoom ring, then focus. About the zoom ring Tu[...]

Changing the Lens 10 1 . Align the mount index red dots on the camera body and lens and attach the lens. Turn the lens clock- wise until it locks in place. 2. To detach the lens, hold down the camera's lens unlock button, then turn the lens counterclockwise. * When attaching a lens, do not press the camera's lens unlock button. Doing so c[...]

Finger Point on Limited Lenses Lens Cap 11 You can easily attach a Limited lens by aligning the finger point on the lens with the camera's lens unlock button. Limited lenses FA 31mm f/1.8AL Limited FA 43mm f/1.9 Limited FA 77mm f/1.8 Limited To remove the lens cap, squeeze the tabs as shown in the illustration. * When not using a lens, be sure[...]

Focusing 12 To switch between autofocusing and manual focusing, use the camera's focus mode lever. For details, refer to your camera's instruction manual. * For FA  lenses, see page 13. * For non-autofocus cameras, use manual focusing. Autofocusing Press the shutter button halfway to autofocus. * During autofocusing, the focusing ring [...]

13 FA  lenses With FA  lenses, shift the focus- ing ring forward or back to switch between autofocus and manual focus. Setting autofocus Push the focusing ring forward until you can see AUTO FOCUS. * When the lens is set for autofocus, the focusing ring locks. Setting manual focus Pull the focusing ring until AUTO FOCUS is hidden. Turn the fo[...]

14 * If your camera has a K AF2 mount, you can still switch between auto- focus and manual focus with the lens focusing ring even when the camera has been set to autofocus. * If you have a camera (such as the SF-series) having a K AF mount, set both the camera and lens focus mode switch to the same setting. If the camera is set to autofocus [AF sin[...]

Setting the Aperture [A (Auto) Lock Switching] 15 To set the aperture ring to A [Auto], hold down the Aperture A-lock but- ton and align the A index with the white-line index. To set the aperture ring to another setting, hold down the Aperture A-lock button and turn the aperture ring. * If your camera has a K mount with no lens information contacts[...]

16 About the Zoom Lens Aperture Zoom lenses whose maximum aperture varies depending on the focal length have a [Minimum length] aperture index for the shortest focal length and a [Maximum length] aperture index for the longest focal length. To set the aperture to A [Auto], turn the aperture ring to the white [Short focal length index] at the center[...]

17 Apertures and Click Stops Certain lenses have a white dot next to the maximum aperture. The white dot indicates a difference of one aper- ture stop. For example, as shown on the right, the white dot next to f/2 indicates f/2.8. If there is no white dot for a click stop between the f/numbers, the click stop indicates the respective f/number shown[...]

Using the Infrared Index If you use infrared film with an R2 or O2 filter, the point of focus differs from normal shooting (with visible light). This means the point of focus must be corrected. * Infrared film cannot be used with the MZ-S, MZ-60, and cam- eras since these cameras use infrared light to detect film transport operations. When the subj[...]

19 Zoom Lens Infrared Index With a zoom lens, the focusing cor- rection amount for infrared film shoot- ing varies depending on the focal length. As shown in the illustration, zoom lenses have an infrared index. Correct the focus with respect to the focal length used. FA lens-Body.indd 19 FA lens-Body.indd 19 2008/09/30 17:02:37 2008/09/30 17:02:37[...]

Lens Hood 20 The lens hood can be round, square, or built-in. Using a lens hood is rec- ommended for preventing internal lens reflections. Suitable hoods are listed on the next page. Note: * Do not use a lens hood if you are using the camera's built-in flash. The hood may obstruct the flash, causing darkened areas in the pic- ture. In the case[...]

21 Compatible Lens Hoods Lens Compatible Hood Shape Attachment Method FA 35mm f/2AL PH-RBA49 Round Bayonet FA 43mm f/1.9Limited MH-RA49 Round Screw-on FA 50mm f/1.4 PH-RA49 Round Screw-on RH-RC49 Round Screw-on PH-SA49 Square Spring FA J 18-35mm f/4-5.6AL PH-RBL67 Round Bayonet FA 20-35mm f/4AL PH-RBA58 Round Bayonet FA J 28-80mm f/3.5-5.6AL PH-RBE[...]

22 Attaching a Round Lens Hood Screw-on Type Screw the hood on to the front of the lens. Bayonet Type Attach the hood to the front of the lens and turn the hood clockwise until it snaps in place. To detach the lens hood, follow this procedure in reverse. * When not using the lens hood, you can attach it to the lens in reverse. FA lens-Body.indd 22 [...]

23 Attaching a Square Lens Hood 1 . The hood attaches in the same way as a lens cap. While holding down the two knurled tabs, attach the hood to the front of the lens. 2. The square hood should be posi- tioned horizontally on the lens. If it is tilted, vignetting may occur. FA lens-Body.indd 23 FA lens-Body.indd 23 2008/09/30 17:02:37 2008/09/30 17[...]

24 Using the Built-in Lens Hood To use the built-in lens hood, pull it out from the lens. In the case of the FA  600mm f/4 lens, the built-in lens hood is threaded. To extend or retract it, turn the hood. For details, see the FA  lens instruction manual. Lenses with a Built-in Lens Hood FA 31mm f/1.8AL Limited FA 77mm f/1.8 Limited FA  600[...]

25 PL Filter Window Certain hoods also have a PL filter window. This enables you to easily rotate any polarizing or circular polar- izing filter attached to the lens. Lenses with a PL filter window z FA 35mm f/2AL z FA J18-35mm f/4-5.6AL Using the PL filter window 1. Remove the PL filter window cap by sliding it downward, as shown by the arrow. FA [...]

26 2. From the PL filter window, turn the polarizing or circular polarizing fil- ter. 3. Reattach the PL filter window cap. * Before shooting, be sure the cap has been reattached so that the hood can provide the maximum effect. FA lens-Body.indd 26 FA lens-Body.indd 26 2008/09/30 17:02:37 2008/09/30 17:02:37[...]

Tripod Mount 27 The FA  600mm f/4 lens has a tripod mount so you can mount the lens on a tripod. Switching between horizontal and vertical shooting Loosen the lens orientation lock screw and turn the lens by 90˚ left or right. Then tighten the lens orientation lock screw. The tripod mount can also be detached. For instructions, see the FA  l[...]

Filters Select the filter matching the lens filter size, then screw it onto the front of the lens. * The FA  600mm f/4ED (IF) lens has a filter holder in the rear to hold the 43mm filter provided with the lens. For details, see the FA  lens instruction manual. Filter Cautions When attached to the lens, the fil- ter becomes part of the lens op[...]

29 Note: Using a Circular Polarizing Filter * In the case of the FA 77mm f/1.8 Limited lens, attaching certain dis- continued circular polarizing filters (including the PENTAX Type-A Circular Polarizing Filter) prevents the built-in hood from being pulled out. * With an autofocus camera, use a circular polarizing filter instead of a polarizing filt[...]

Cautions When Using Flash 30 With the built-in flash Use the built-in flash for subjects at least 0.7 meter away. If the subject is closer than 0.7 meter, overexposure may result. The built-in flash can usually be used with a lens as long as the | | symbol does not blink in the camera as a warning. However, with certain lenses vignetting may still [...]

31 Compatibility with Built-in Flash FA and FA J lenses other than the following can be used with the built-in flash with no problems. Lens K series series MZ series *1 MZ-S Z series FA  600mm f/4ED (IF) ×× × ×× FA J 18-35mm f/4-5.6AL { U *2 U *3 U *4 U *3 FA 20-35mm f/4AL {{ U *5 U *6 U *5 FA J 28-80mm f/3.5-5.6AL {{ U *7 { U *8 FA 28-105m[...]

Lens Case 32 The soft cases have a case desig- nation as shown in the Lens Case Compatibility Table on the right. * A dedicated soft case is provided with FA Limited series lenses. Lens Case Compatibility Table Lens Compatible Case FA 31mm f/1.8AL Limited Dedicated case FA 35mm f/2AL S80-80 FA 43mm f/1.9Limited Dedicated case FA 50mm f/1.4 S70-70 F[...]

MEMO 33 FA lens-Body.indd 33 FA lens-Body.indd 33 2008/09/30 17:02:38 2008/09/30 17:02:38[...]

Main Specifications 34 *AL: Lens with an aspherical element. ED: Lens using an Extra-low Dispersion glass. IF: Lens with internal focusing. Lens Construction Minimum Aperture [F] Angle of View (Diagonal extent) FA 31mm f/1.8AL Limited 9 elements in 7 groups 22 70° FA 35mm f/2AL 6 elements in 5 groups 22 63° FA 43mm f/1.9Limited 7 elements in 6 gr[...]

35 † Includes tripod mount. ‡ Figures in ( ) indicate the thread diameter of the front ring of Filter. Min. Focusing Distance [m] Max. Magnification [×] Max. Diameter×Length Weight [g] Filter [ ø mm×mm] Lens only Lens + Hood [mm] 0.3 0.16 65×68.5 345 − 58 0.3 0.17 64×44.5 195 215 49 0.45 0.12 64×27 155 165 49 0.45 0.15 65×37 220 − 4[...]

STATEMENT OF FCC COMPLIANCE This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions : (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interfer- ence that may cause undesired operation. Changes or modifications not approved by th[...]

37 can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: • Reorient or relocate the receiving antenna. Increase the distance between the equipment and receiver. Connect the equipment to an outlet on a circuit different from that to which the recei[...]

56808ENG Copyright © HOYA CORPORATION 2008 H39-200809 Printed in Vietnam The CE Mark is a Directive conformity mark of the European Union. HOYA CORPORATION PENTAX Imaging Systems Division 2-36-9,Maeno-cho, Itabashi-ku, Tokyo 174-8639, JAPAN (http://www.pentax.jp) PENTAX Europe GmbH Julius-Vosseler-Strasse 104, 22527 Hamburg, GERMANY (European Head[...]