Philips 22HFL3XX8D/10 Bedienungsanleitung

Philips Hospit ality TV Installation Manual for 22HFL3XX8D/10 26 HFL3XX8D/10 32HFL3XX8D/10 42 HFL3XX8D/10 Status: Approved Version 1.0 Date: June 2013 Author: Marian Pufulete[...]

1 Contents 1. Requirements befor e startin g the installation .......................................................................................................... 2 2. Find out the state of th e TV ...................................................................................................................................... 3 3. Re -in[...]

2 1. Requirements bef ore starting the installation Before starting the in stallation, make sure that you have everything you need at hand. Master remote control 22AV8573 or Guest remote control 22AV1109C And USB stick You will need the master remote c ontrol or the gu est remote contr ol to access th e menus. To access the setup menu press the ‘[...]

3 2. Find out the state of the TV It is important to kn ow if a TV is in ‘ virgin mode’ (out of the box) or ins talled before. If you can see this screen below, y ou know that the TV is in ‘virgin mode’ and y ou can install the se t. See chap ter 4 of this manual. If you power on the set and then press the ‘Home’ button on the guest re [...]

4 3. Re -install TV If you want to start an installation from scratch you can always re -install the TV. This can be done by using the option: Re-install TV set. If the Professional mode is activ e you can access the setup menu by pr essing the ‘RC5 SETUP’ ke y, and then press the ‘Home/Menu’ button (For the guest remote contr ol, press the[...]

5 Pr ess “OK ” to access the sub -menu, n a vigate to “Reins tall TV” . Press “OK” to r einstall TV set. If all is c or rect s elect “Start n ow” and press “OK ”. After this operation the TV will po wer off and on and d isplay the install ation wizard. Note: All settings are at default values and no channel plan is available.[...]

6 4. Installation wizard When you turn on th e TV for the first ti me, or you have reinstall ed the TV, you should see the foll owing screen. Here you will need to select your preferred language . Please select with the Up and D own arrow keys an d confirm with ‘OK’ or press the Left arrow ke y. After this, you will need to select the country. [...]

7 The next step is to choose betwe en the options ‘Shop ’ and Home’. Selec t ‘Home’ for ins tallation. If you select “ SHOP ” an ‘e - sticker’ ban ner will be displa yed on the TV. This is f or commercial purp ose only. Now you can select the visual and hearing impaired options. If you select ‘ O n’ , your TV will automaticall[...]

8 Then you can selec t ‘Continue’ and press ‘ OK’ again. Here you can sel ect the type of channels you would lik e to install and what pr eference you will use. It is advisable to ch eck the settings befor e starting the search.[...]

9 The options from the Se ttings menu are: The “Frequency scan ” conta ins three options: - “Quick”: this is a fast method to search chan nels but it might skip some channels (d epending on the n etwork). - “Full”: the scan will s earch on all frequencies an d will store all channels available. This is the safe method if you don’t kno[...]

10 During the channel search you can see the progre ss bar and how man y channels are found at that time. When the search is done, you should s ee “ Channel se arch complete ” and a summary of the channels found . Press “ OK ” butt on on remo te control to finish the se arch. If you would like to change the picture and sound setti ngs, you [...]

11 Select “ Continue ” to start t he wizard and pres s the “ OK ” on remote c ontrol. The wizard will ask you some questions about which image you prefer, select the option you desire and press “ OK ” on the remo te control. Once this wizard is d one, you will return t o the installation menu again. The last option in this menu is “Ad[...]

12 After pressing “ Don e ” you have c ompleted the install ation of th e TV and you sh ould see this screen. Press “OK ” on the remote control to exit this wizard. Note: This wizard will not be available anymore when you start the TV the next time. The only way to re-use this wizard is to reinstall the TV set .[...]

13 5. Channel options a. Reordering channel s To reorder TV channels you need the channel plan from the Professional Settings menu. In the consumer menu you cannot rearrange channels. The Professional Settings menu can be access ed by using the Yellow remo te ( RC 22AV8573 Mas ter Remote contr ol) and pressing the MENU But ton or with the TV remote[...]

14 Select “Reorder” and Press the “OK ” button on the re mote control to re order channels. Navigate to the channel that you wan t to move and press “OK” on the re mote control to selec t that channel . The arrows around the channel indicate that the channel is selected and can be moved. Use the arrow keys to move the channel to the new[...]

15 b. Rename channels Select the channel, pr ess the “Options” button on r emote control and select “ Rename ” to change name of a channel. If you then press the “OK” button a virtual QWERTY k eyboard will p op up. c. Hide channels Important: You cann ot delete channels fr om the channel gri d, but you can use th e option to hide the ch[...]

16 6. Professional Setting s [Professional Se ttings] Settings especial ly desig nated for hospitali ty. [Professional Mo de] [Off]: The TV operat es as a basic (consum er) TV. [On]: All setting s in the Professional S ettings Setup menu are active. Only by switching on thi s mode the TV will act as a Hospitality TV. [Room ID] Entry field to store [...]

17 [TV to USB] Check Cloning sect ion [RF to TV ] Option used for Smar tInstal l Note: Setup and configuration for SmartInstall is not covered by this manual [Reset] Reset all settings fr om Professional mode to default values. [Switch on set tings] All settings from this submenu are applied when the TV set is power ed ON. [Switch on chann el] When[...]

18 [Maximum volume] This option specifies the maximu m allowable volum e level of the TV. Selectable value from 00 until 60. [Switch on pi cture format] This setting allows you to set a switch on picture for mat. The power on function allows the TV to enter a specific mode ([On], [Standby], or [Last status]) of operation when the mains power is act[...]

19 [Line 1] Line 1: First line of the welcome mes sage. When pressing “O K” button on remote control while editing line 1 or 2, a virtual k eyboard w ill pop up on screen. Note: Maximum 20 characters per line. [Line 2] Line 2: Second line of the welcome mes sage. [Clear] Will delete the curren t wel come message. [Message Time-ou t] Sets the pe[...]

20 [Hotel Information] The settings fr om this submenu will allow you to set up the pictures for the hotel inf ormation. [Display info rmation] [On] : Enables ho tel information to b e available in the gu est menu. [Off]: Disables hotel inf ormation t o be available in the guest menu. Check upload ho tel info. [Info key enable] Enables the possibil[...]

21 [RC lock] [OFF]: All buttons on the Guest remote c ontrol will fun ction normally. [On]: All buttons on the Guest rem ote control are disa bled. Master remote control 22AV8573 (yellow) or RC2573 (green) commands are not affected by this setting. [OSD display] Set this function to show or hide on scre en informatio n. [Off]: On screen inf ormatio[...]

22 [Enable teletext] Enables or disables the use of Tele text OSD on pressin g the Teletext butt on: [Off]: Disables Telet ext. [On]: Enables Telet ext. [Enable MHEG] Enables or disables the use of MHEG OSD on pressing the MHEG button: [Off]: Disables MH EG. [On]: Enables MHEG. [Enable EPG] Enables or disables the use of EPG OSD on pressing E PG bu[...]

23 [Digit timeou t] Defines the time in terval between nu meric buttons when users press digits on the remote contr ol. Selectable values f rom 0.5 to 9.9 seconds. [Selectable AV] Allows the install er to define which external sources to be displayed on the source list when pres sing AV button on the Guest remote c ontrol. Note: Only the sources ma[...]

24 [Speaker setting s] Submenu with speak er setting s. [TV speaker enable] [Off]: Disables the TV Main speakers. The headphone output is not affected by thi s setting. [On]: Enables the TV Main speakers. [Independe nt main speakers] [Off]: The volume +/- o n the Gu est remote control will affect both the TV Main spe aker and the headphone volum e.[...]

25 [Auto channel up date] [ON]: Enables aut omatic channel upd ate. [OFF]: Disables aut omatic chann el update. [Auto software up date] [ON]: Enables s oftware update [OFF]: Disables softwar e update [Skip scrambled signals] [Off]: Allows scra mbled chan nels in the channel list. [On]: Skips the scra mbled chann els in the channel list. [Multi remo[...]

26 MyChoice configu ration: Free Package: Channels free to view Package 1: Package with chan nels available only wi th valid MyChoice pin cod e Package 2: Package with chann els available only wi th valid MyChoice pin cod e ThemeTV Configurat ion: Edit the names f or ThemeTV categ ories Note: ThemeTV setup is not included in this manual To select t[...]

27 7. Welcome Log o IMPORTANT: Total a mount of size for Ho tel Informati on and Welcome Log o MUST be smaller than 12 Mb ( megabyte ) There are 2 Philips l ogos displ ayed at startup. The sec ond logo can be replaced b y picture uploaded via USB. File format: 1280 x 720.png file. Note: below ti ming values are approximate indica tions and can dif [...]

28 8. Clone With cloning it is p ossible to copy to /from a USB devic e TV the configuration data and the channel list data. Place a USB Memory stic k in the USB side c onnector of the TV. *USB device should be formatted as FA T or FAT32. Access the Professional menu by pressing the ‘RC5 SETUP’ key, and then press the ‘Home/ Menu’ button. ([...]

29 9. Feature settings [Multi RC] This function allows tha t up to four tele visions can be installed in a room wherea s every TV will li sten to its own RC. Once the TV is se t, also eve ry RC can be set to re member its connec ted TV: [Off] This function is not used; all TVs will listen to a ‘b lue’ RC. [TV0] The TV will listen to a ‘0’ R[...]

30 Enter the Professi onal menu go to: Clock setup and con figure the Download pr ogram. Afterwards define the country in which the TV is installed. And if it is requir ed the Time off set. 2. Go to Installati on and enable MyChoi ce. In this case thre e options are availabl e. These ar e: OFF: This means that MyChoice is d isabled and the pac kage[...]

31 4. Defining the channel packag es is the second step in the MyChoice configuration. Based on the pin code the TV channels will be disp layed. Thre e packages are a vailable: Free package: This packa ge will include all channels which are available without any pin code. To add a channel to a ring you have to select the channel and p ress OK to ti[...]

32 Each package can be configured independ ently withou t having any influ ence on other packag es, but you have to keep in mind that after activation the TV will show onl y the channels which are ti ck ed for this package. Press Menu to exi t the Professional menu and store all settings. 5. Check the MyCh oice functi onality. Power ON the TV and w[...]

33 10 . CSM (Consumer Se tup menu) The CSM contains data about the TV s oftware, serial n umber and other details. The menu can be accessed u sing a standard remote c ontrol or usin g the master rem ote control. 1. Using the standard r emote contr ol: press the f ollowing key sequence “1,2,3,6, 5,4” 2. Using master re mote con trol (22AV8753D) [...]