Philips BDH5011 Bedienungsanleitung

User Manual Benützersanleitung Guida Utente Manual de uso Manuel de l’utilisateur TYPE NR. BDH5011 Philips Business Solutions G I S F E[...]

T able of Contents 1. IMPOR T ANT SAFETY INSTRUCTIONS . . 3 2. FCC ST A TEMENT . . . . . . . . . . . . . . . . . . . . 5 3. CLEANING AND MAINTENANCE . . . . . . . 6 4. PRODUCT FEA TURES . . . . . . . . . . . . . . . . 8 5. P A CKA GE CONTENTS . . . . . . . . . . . . . . . 10 6. UNDERST ANDING Y OUR DISPLA Y . . . . . .12 6.1 Fr ont View . . . . . .[...]

3 User Manual BDH5011 W ARNING RISK OF ELECTRIC SHOCK DO NO T OPEN The lightning flash with arr ow-head within a triangle is intended to inform the user that parts inside the pr oduct are a risk of electric shock. W ARNING T o r educe the risk ofelectricshock, do not remo ve the fr ont or back covers. No user -ser viceable par ts inside . Refer ser[...]

Do not install unit in an enclosed area unless pr oper ventilation is pr ovided. • The unit should be operated fr om the type of pow er sour ce indicated on the label. If the type of a vailable pow er is unknown, consult your dealer or local po wer compan y . • The unit is equipped with a 3-pin gr ounded plug. The plug will only fit into a gr o[...]

5 User Manual BDH5011 FCC Compliance Statement The equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of FCC rules. These limits are designed to pr ovide reasonable pr otection against harmful interfer ence when the equipment is operated in a commer cial envir onment. This equipment gener[...]

6 User Manual BDH5011 Cautions When Using the Plasma Displa y • Do not bring your hands, face or objects close to the ventilation holes of the plasma displa y . T op of plasma displa y is usually very hot due to the high temperature of exhaust air being released thr ough the ventilation holes. Burns or personal injuries ma y occur if any body par[...]

• Do not use volatile substances such as insect spra ys, solvents and thinners on the cabinet. • Do not place anything made fr om rubber or PVC near the cabinet for extended periods of time. A void Still Ima ges • Do not allow a still pictur e to be displa yed for extended periods of time. This can cause a permanent image to remain on the pla[...]

8 User Manual BDH5011 • Advanced Digital Imag e Pr ocessing Advanced digital pr ocessor with adaptiv e motion de-interlacing conv erts all 15KHz signals into pr ogressiv e scan for a brighter , flick er free image. • Pull-Do wn for Film Scan Con version Built-in 3:2 pull-down pr ocessing can automatically detect and con vert film content to pr [...]

fr om sources such as a digital D VD pla yer , directl y to this displa y without digital-to- analog conv ersion that er odes video quality . Direct digital-to-digital connection ensur es the absolute best in video quality . • 280x1024 SXGA Support The onboard digital scaling engine can accept various PC and HDTV signals and digitally map the sig[...]

Supplied Accessories Please verify that y ou received the f ollowing items with your package content: Plasma Displa y Remote Contr ol User Manual P ow er Cable 5. P ackage Contents 10 User Manual BDH5011[...]

V GA Cable Batteries Optional Accessories The following accessories ar e available and ma y be pur chased from y our local sales repr esentative: • W all Mount • Composite Video Cable (RCA) • S-Video Cable (Mini-Din) • Component Video Cable (RCA to RC A) • Audio Cable (RC A Cable) 11 User Manual BDH5011[...]

6.1 F r ont View P o wer (Standb y) Button T urns pow er on/off fr om standby mode. There is a 3-second wait betw een on/off cycles. Status LED: • Not Illuminated - No A C P o wer detected If the main pow er switch (r ear of panel) is turned off, this LED will not illuminate. • Solid Y ello w - Standby (P o wer OFF) with A C pow er detected The[...]

6.3 Full Function Remote Contr ol 1. Standb y P o wer On/Off Push this button to turn on the displa y from Standby mode. Push it again to turn off to Standby mode. 2. Number K eypad These k eys ar e not applicable to this monitor . 3. QuickView This k ey is not a pplicable to this monitor . 4. PIP (Picture-in-Picture Button) T urns on PIP (Picture-[...]

16. Channel Up/Down These k eys ar e not applicable to this monitor . 17. Swap This k ey s waps the main and sub pictur e windows under PIP or POP modes. (See chapter 10)) 18. PIP P osition This k ey changes the PIP sub-windo w to 4 differ ent corner locations. (See Chapter 10) 19. Input Select Press to select input signal modes sequentially . (See[...]

7.1 Connecting a D VD Pla y er Using Component Video Input 1. Connect the green-color ed (labeled as Y ) jack fr om the D VD to the green-color ed Y1 - jack of the displa y 2. Connect the red-color ed (labeled as PR or CR ) jack fr om the D VD to the red-color ed PR1/CR1 jack of the displa y . 3. Connect the blue-colored (labeled as PB or CB ) jack[...]

7.2 Connecting a HDTV Decoder Set-T op Bo x Using Component Video Input 1. Connect the green (labeled as Y ) jack fr om the HDTV Set-top box to the gr een Y1 jack of the displa y . 2. Connect the red (labeled as PR or CR ) jack fr om the HDTV Set-top box to the r ed PR1/CR1 jack of the displa y . 3. Connect the blue (labeled as PB or CB ) jack fr o[...]

7.3 Connecting a VCR Using S-Video Input 1. Connect the S-Video (4-pin DIN) connector fr om the VCR to the S-VIDEO input on the back of displa y . 2. Connect the red (R) and white (L) audio jacks fr om the VCR to the R and L audio-in jacks located next to the S-VIDEO connector . Using Composite Input 1. Connect the ih y ellowlg (video) out connecto[...]

Using the Subw oofer Out (Connecting a Subw oofer) 1. This displa y is equipped with a subwoofer output for connecting to an external amplified subwoof er . 2. Connect a RC A cable fr om the subwoof er output jack to the external subwoof er . Notes: • The A UDIO OUT RC A jacks can be set to either Fix ed or V ariable audio output le vels. Please [...]

19 User Manual BDH5011 7.5 Connecting a PC Using RGB or D VI Video Input 1. For most PC’ s, connect the 15-pin D-Sub RGB connector fr om the back of the PC to the RGB-IN connector located on the back of the displa y . If you ha ve a PC that is equipped with a D VI (Digital Visual Interface), you ma y connect the PC D VI connector fr om the back o[...]

7.6 RS-232 Remote Contr ol Connections RS-232 Serial T erminal Overview This displa y is equipped with an RS-232 serial terminal for using the displa y with computer contr ols. The RS-232 serial terminal conforms to the RS-232C interface specification. The computer will requir e software application (such as pr ogramming language software) which al[...]

Notes: • T o connect a PC to the display’ s RS-232 port, Y ou must use a isstraight-thr oughl• RS- 232 cable where pins 2 (RX) and 3 (TX) ar e not re v ersed at one end. • If ther e are no data to be sent, then the parameter signal does not need to be sent. • If multiple commands ar e transmitted, make sure to wait f or the response f or [...]

Item Cmd Data Details Surr ound 9F 00-02 00=Off, 01=3D Stereo , 02=3D Mono RF Input A0 00-01 00=Air , 01=Cable Full Search A1 00 00=initiate full search MTS A4 00-02 00=Stereo , 01=Mono, 02=SAP Zoom A5 00-05 00=16:9, 01=Panorama, 02=4:3, 03=Zoom1, 04=Zoom 2, 05=Zoom3 PIP/POP A7 00-03 00=Normal, 01=PIP , 02=POP1, 03=POP2 (4:3), 04=POP3 (16:9). 22 Us[...]

23 User Manual BDH5011 8.1 P o w ering ON / OFF Using Fr ont Panel or Remote Contr ol 1. Mak e sure the displa y is plugged into the wall outlet and the main A C switch located in the rear of the displa y is switched to ON position. If the pow er is plugged in and the A C switch is on, the ST A TUS LED will illuminate in solid yello w color . 2. Pr[...]

8.2 Selecting Signal Sour ce Using Fr ont Panel or Remote Contr ol 1. Press the INPUT k ey on the fr ont panel or the INPUT SELECT k ey on the r emote contr ol. 2. Pressing the INPUT k ey will cycle the displa y thr ough all a vailable input signal sour ces in the following or der : Using Direct Input Selection K eys 1. If you pr efer not to cycle [...]

8.3 Adjusting Sound V olume Using Fr ont Panel or Remote Contr ol 1. T o turn up sound v olume, press VOLUME + on either the fr ont panel of displa y or on the remote contr ol. 2. T o turn down sound v olume , press V OLUME - On either the fr ont panel of displa y or on the remote contr ol. Using MUTE 1. If you w ould like to ha ve no sound on a te[...]

9.1 Understanding HDTV What is Digital T ele vision or DTV? Digital TVs are televisions that can r eceive and displa y digital television broadcasts sent using an y one of three f ollowing categories: HDTV (High Definition TV), EDTV (Enhanced Digital TV), and SDTV (Standard Definition TV). What is the Differ ence Between HDTV , EDTV , and SDTV? HDT[...]

SDTV Interlaced scan method 1 V ertical Res. 2 : 480 lines Horizontal Res. 3 : 640 dots Aspect Ratio 4 : 4:3Wide SDTV grade televisions and displa ys are ca pable of displa ying a maximum of 480 lines using interlaced scan method. All resolutions higher than 480 lines must be r educed to 480 lines in order to be displa yed. 1 Scan Mode Interlaced s[...]

28 User Manual BDH5011 10.1 Pictur e-In-Picture (PIP) / Side-b y-Side Pictur e (POP) T urn On PIP or POP Mode 1. Press the PIP k ey once on the r emote contr ol to engage in PIP mode . Pr essing the PIP again will switch to POP mode. Pressing the PIP k ey sequentiall y will cycle between: 2. When engaged in PIP mode, a small window is displa yed in[...]

Switching Main and Sub-Pictures (SW AP) 1. Y ou can swap the main pictur e and sub picture using the SW AP k ey . Press the SW AP ke y once to swap . Press the SW AP k ey again to s witch back. Changing the Input Sour ce for Sub-Pictur e 1. Once the PIP or POP mode is turned on, you can change the sub-pictur e’ s input sour ce by pr essing the SO[...]

Pictur e-In-Picture (PIP) / Side-b y- Side Pictur e (POP) - Con’ t Notes: • PIP mode can only be turned on if the displa y’ s input is set to: A V , S-Video , Component 1 and 2. If the displa ys main input is set to RGB or D VI, the PIP and POP will not function. • If the displa ys input is set to Component 1 or Component 2, the PIP will on[...]

PIP Windo w SW AP 1. By default, the OSD will alwa ys displa y DISABLE. T o swa p the main and sub windows, use the ADJ +/- k ey to switch to ENABLE. Once the swap is complete, the OSD will return to displa y DISABLE. Screen Rate (Aspect Ratio Contr ol) 1. When POP (Side-by-side) pictur e is turned on, you can change the aspect ratio f or the image[...]

10.2 Widescr een (16:9 Aspect Ratio) Viewing Modes Understanding Widescreen Modes This plasma displa y is capable of displa ying a widescreen image on the nativ e 16:9 aspect ratio screen. Howe ver , not all available br oadcast or video content fits perfectly in a widescr een (16:9) format r esulting in unused scr een space. Please use the followi[...]

F or Widescreen Content Many popular D VD titles ar e ‘Anamorphic’ (widescreen); howe ver , there are tw o predominant ‘Anamorphic’ (widescreen) aspect ratios: 2.35:1 and 1.85:1. When 2.35:1 content is displa yed on this 16:9 widescreen displa y , you will notice smaller black bars on top or bottom of the screen. When a 1.85:1 content is di[...]

Widescr een Viewing Modes (Con’ t) Accessing Widescreen Viewing Modes using OSD Y ou can also use the OSD menu to access the same widescreen and zoom mode functions. T o access these modes using OSD: 1. Press the MENU +/- k eys on the r emote or the fr ont control panel. 2. Mak e sure that the f ollowing PICTURE OSD menu is displa yed. 3. Use the[...]

10.4 Sleep Timer Settings Setting Sleep Timer Using OSD T o set the sleep timer using the OSD scr een: 1. Press the MENU +/- k eys on the r emote or the fr ont control panel. 2. Use the ADJ +/- k eys to na vigate to ioO THERl• OSD sub-menu as displa yed below . 3. Use the MENU +/- k eys to na vigate to SLEEP function. 4. Use the ADJ +/- k eys to [...]

10.5 V ariable and Fix ed Audio Output Setting Output Using OSD Y ou can set the type of output this displa y outputs fr om its audio output jack located in the rear of the displa y . By using an OSD based switch, y ou can easily choose betw een variable or fix ed audio outputs. T o set the audio output setting: 1. Press the MENU +/- k eys on the r[...]

37 User Manual BDH5011 BASS Adjusts the BASS level of the sound. For more bass response, increase the BASS lev el. TREBLE Adjusts the TREBLE level of the sound. For more vocal and high fr equency response, increase the TREBLE lev el. BALANCE Adjusts the BALANCE level betw een LEFT and RIGHT channels. A value of 50 is the center point between LEFT a[...]

10.8 Signal F requency Information Displa y Displa ying Frequency of Signal This displa y is capable of displa ying the frequency lev el of the signal being displa yed. T o see signal frequency inf ormation: 1. Press the MENU +/- k eys on the r emote or the fr ont control panel. 2. Use the ADJ +/- k eys to na vigate to the O THER OSD sub-menu. INPU[...]

When Using RGB & D VI Inputs Mode Hor . V er tical F ormat Refresh 1 31.469 59.940 640•480 (V GA) 60 2 37.861 72.809 640•480 (V GA) 72 3 37.500 75.000 640•480 (V GA) 75 4 43.269 85.008 640•480 (V GA) 85 5 35.156 56.250 800x600 (SV GA) 56 6 37.879 60.317 800x600 (SV GA) 60 7 48.077 72.188 800x600 (SV GA) 72 8 46.875 75.000 800x600 (SV GA[...]

11.1 F or A V/Component Video (480i signal) Accessing Picture Adjustment Mode V arious picture adjustments can be set using the Picture Adjustment OSD menu. T o access the OSD menu: 1. Press the MENU +/- k eys on the r emote or the fr ont control panel. 2. The first menu displa yed is the PICTURE menu. Mak e sure that the PICTURE OSD menu’ is dis[...]

SHARPNESS Use sharpness to adjust the amount of detail enhancement to the video picture. Increase the setting will enhance the edges of objects in the video picture. Decreasing the setting will r educe enhancement. COLOR TEMPERA TURE Select the color temperature f or white balance. There ar e five settings to choose fr om: (1) 6500D - sets the whit[...]

11.2 F or Component Video (480p, 720p and 1080i signal) Accessing Picture Adjustment Mode V arious picture adjustments can be set using the Picture Adjustment OSD menu. T o access the OSD menu: 1. Press the MENU +/- k eys on the r emote or the fr ont control panel. 2. The first menu displa yed is the PICTURE menu. Mak e sure that the PICTURE OSD me[...]

43 User Manual BDH5011 SHARPNESS Use sharpness to adjust the amount of detail enhancement to the video picture. Increase the setting will enhance the edges of objects in the video picture. Decreasing the setting will r educe enhancement. COLOR TEMPERA TURE Select the color temperature f or white balance. There ar e five settings to choose fr om: (1[...]

11.3 F or Component Video (480p, 720p and 1080i signal) - Con’ t Accessing Geometric Adjustment Mode V arious geometric adjustments can be set using the Geometric Adjustment OSD menu. T o access the Geometric Adjust sub-menu: 1 Press the MENU +/- k eys on the r emote or the fr ont control panel. 2 The First menu displa y ed is the PICTURE Menu. M[...]

45 User Manual BDH5011 11.4 F or RGB / D VI Accessing Picture Adjustment Mode V arious picture adjustments can be set using the Picture Adjustment OSD menu. T o access the OSD menu: 1. Press the MENU +/- k eys on the r emote or the fr ont control panel. 2. The first menu displa yed is the PICTURE menu. Mak e sure that the PICTURE OSD Menu is displa[...]

V -SIZE Use to change vertical size of the picture. Increase to enlarge the pictur e size in the vertical direction. Decrease to r educe the picture size in the v er tical direction. V -CENTER Use to change vertical position of the picture. Increase to shift the pictur e up. Decr ease to shift the picture do wn. H-WIDTH Use to change horizontal siz[...]

T roubleshoot Common Conditions The following list r epresents possible anomalies that you ma y encounter and methods for r emedy . Please ref er to this checklist prior to contacting a ser vice repr esentative. 1. The power cor d is disconnected. 2. The main power s witch on the back of the displa y is not switched on. 3. The selected input has no[...]

Displa y Panel Screen size: Diagonal 50 inch Aspect ratio: 16:9 wide Number of pix els: 1366(Horizontal, RGB T rio ) x 768(V ertical)pixels Pix el Pitch: 0.81mm x 0.81mm Luminance: 1000 cd/m 2 , at 1% white window pattern P o wer Sour ce Input voltage: 100 ~ 240 V ac , 50 / 60 Hz Input curr ent: 4A Inrush curr ent: 60 A p-p/20ms Max. P ow er consum[...]

D VI Signal T ype: Digital P olarity: P ositive or Negativ e Frequency H: suppor t to 31K~68KHz V: support to 50~85Hz Audio Signal : Analog 500mV rms /more than 22K ohm. Pin Assignments For D-SUB Connector (In/Loop Out) Pin Signal Assignment Pin Signal Assignment Pin Signal Assignment 1 RED 6 RED GND 11 GND 2 GREEN 7 GREEN GND 12 SD A 3 BLUE 8 BLUE[...]

RGB/D VI Refr . Hor .. V ert. V -Sync H-Sync Mode Rate Fr eq. F req. P olariy P olarity Dot rate No Resolution (Hz) (K Hz) (Hz) (TTL) (TTL) (MHz) 1 640(V GA)x480 60 31.469 59.940 - - 25.175 2 640(V GA)x480 72 37.861 72.809 - - 31.500 3 640(V GA)x480 75 37.500 75.000 - - 31.500 4 640(V GA)x480 85 43.269 85.008 - - 36.000 5 800(SV GA)x600 56 35.156 5[...]

Y/PB/PR F or Component 1 and 2 Mode Resolution Rate 1 640 x 480p 60 2 1920 x1080i 60 3 1280 x 720p 60 Maximum Resolution: Up to 1280 x 1024 (V GA Mode) Dimensions: Without/Stand With/Stand Width: 1256 mm 1256 mm Height: 762 mm 810 mm Depth: 107.5 mm 300 mm P ackag e Dimensions Width: 1436 mm Height: 1125 mm Depth: 470 mm W eight Net weight: 108.00 [...]

Emission Requirement This unit meets the EMI limits in all screen modes as qualified b y FCC Class B part 15. P o wer Mana gement Mode H-sync V -sync Video P ow er dissipation Normal Pulse Pulse Active Normal pow er Standby No pulse No pulse No video Pow er off P ow er sa ving Pulse No pulse blanked Less than 6 watts No pulse Pulse Note: This Plasm[...]

Pr eset Timing Chart KJKKJK Item Description: A: T otal time B: Activ e displa y area including borders C: Active displa y area excluding bor ders D: Left/T op bor der E: Right/bottom border F: Blanking time G: Front por ch H: Sync-width I: Back por ch. 53 User Manual BDH5011[...]

Mode No . : 1 2 3 4 5 6 7 8 9 H Resolution: 640 640 640 640 800 800 800 800 800 V Resolution: 480 480 480 480 600 600 600 600 600 Refresh Rate: 6 0 72 75 8 5 56 60 7 2 75 85 Hz Pixel Clock: 25.175 31.500 31.500 36.000 36.000 40.000 50.000 49.500 56.250 MHz Horizontal visible: 640 640 640 640 800 800 800 800 800 Dots Horizontal total: 800 832 840 83[...]

Mode No 20 21 22 23 24 25 26 27 28 H Resolution: 1280 1920 640 852 640 832 1152 1366 1360 V Resolution: 720p 1080i 350 480 480 624 870 768 768 Refresh Rate: 60 60i 70 60 67 75 75 60 60 Hz Pixel Clock: 74.250 74.250 25.175 30.000 30.240 57.283 100.000 85.383 72.000 MHz Horizontal visible: 1280 1920 640 852 640 832 1152 1366 1360 Dots Horizontal tota[...]

Rear View Notes: • Follo w mount brack et instruction included in the mounting kit. • This type of equipment is to be installed by qualified installers, please contact with authorized dealer for installation. 6 97 mm 380 mm 14. W all Mount (Option) 56 User Manual BDH5011[...]