Pioneer AVIC-F970BT Bedienungsanleitung

Operation Manual NA VIGA TION A V SYSTEM A VIC-F77D AB A VIC-F70D AB A VIC-F970D AB A VIC-F970BT A VIC-F9770D AB A VIC-F9770BT Be sure to read Important Information for the User first! Important Information for the User includes the impor tant information that you must understand before using this product. English[...]

Thank you for buying this P ioneer product. Please read through these instructions so you will know how to operate your model properly . After you have finished reading the instr uctions, keep this document in a safe place for futu re refer ence. Important The screens shown in the examples may differ from actual screens, which may be changed withou[...]

– Control keys on the scrolled map 29 Understanding the route guidance 30 – F requently shown route events 30 Browsing the data field 31 – When the system cannot receive a GPS signal 31 Searching for a destination Searching for a location by address 33 Searching for P oints of Interest (POI) 34 – Searching for POIs using preset categories 3[...]

– Setting the car maintenance schedule 57 Customising prefere nces of the navigation Customising the navigation settings 58 – Restoring the default settings 59 Information on each option of “ Settings ” 59 –“ Route P references ” settings 59 –“ Sound ” settings 61 –“ Warnings ” settings 62 –“ Navigation Map ” setting[...]

Information on the connections and functions for each device 86 Using the radio Using the touch panel keys 89 Reading the screen 89 Starting procedure 90 Selecting a band 90 Manual tuning 90 Seek tuning 90 Selecting a preset channel from the preset channel list 91 Storing broadcast frequencies 91 Storing the strongest broadcast frequencies 91 T uni[...]

Operating with the hardware buttons 116 Playing compressed video files Using the touch panel keys 117 Reading the screen 118 Starting procedure (for Disc) 118 Starting procedure (for USB/SD) 118 Selecting files from the file name list 118 Setting a repeat play range 119 F rame-by-frame playback 119 Slow motion playback 119 Switching the media file [...]

– F or iPhone with a 30-pin connector users 142 – F or iPhone with a Lightning connector users 143 – F or smartphone users 143 Operating with the hardware buttons 144 Using a Bluetooth audio player Using the touch panel keys 145 Reading the screen 146 Starting procedure 146 Selecting files from the file name list 147 Playing files in random o[...]

Displaying the firmware version 169 Updating firmware 169 Checking sensor learning status and driving status 170 Clearing the status 171 Checking the connections of leads 171 Audio adjustments Using fader/balance adjustment 173 Using balance adjustment 173 Switching sound muting/attenuation 174 Adjusting source levels 174 Adjusting the filter 176 ?[...]

Storing song information to an iP od (iT unes T agging) 201 Setting the “ Sound Retriever ” function 202 Changing the wide screen mode 202 Other functions Selecting the video for the rear display 204 Setting the anti-theft function 204 – Setting the password 204 – Entering the password 205 – Deleting the password 205 – F orgotten passwo[...]

Manual overview Before using this product, be sure to read Im- portant Information for the User (a separate manual) which contains warnings, cautions, and other important information that you should note. The screen examples shown in this manual are those for AVIC -F77DAB. The screens may var y according to the models. How to use this manual Findin[...]

“ External storage device (USB, SD) ” The SD memor y card, SDHC memor y card and USB memor y device are collectively re- ferred to as the “ external storage device (USB, SD) ” . If it indicates the USB memor y only , it is referred to as the “ USB storage device ” . “ SD memory card ” The SD memor y card and SDHC memor y card are co[...]

Checking part names and functions This chapter gives information about the names of the parts and the main features using the but- tons. F77DAB F70DAB 1 3 4 5 6 7 8 9 2 b c a F970DAB F970BT F9770DAB F9770BT 1 b 8 e 2 3 4 5 6 7 d 9 1 LCD screen 2 Remote control sensor p The remote control CD-R33 (sold sepa- rately) is available. F or details concern[...]

a Auto EQ microphone input jack Use to connect a microphone for acoustical measurement (sold separately). b Disc-loading slot Insert a disc to play. = F or details, refer to Inserting and ejecting a disc on page 15. c SD card slot = F or details, refer to Inserting and ejecting an SD memor y card on page 15. d Detachable faceplate e button Press to[...]

2 Push the lower part of the detachable faceplate until you hear a click. If you fail to successfully attach the detach- able faceplate to this product, tr y again but be careful not to force it as the panel could be damaged. Notes on using the LCD panel F77DAB F70DAB WARNING ! Keep hands and fingers clear of this product when opening, closing, or [...]

Inserting and ejecting a disc Inserting a disc F77DAB F70DAB 1 Press the h button. The following screen appears. 2 T ouch the following key . Opens the LCD panel. 3 Insert a disc into the disc-loading slot. The disc is loaded, and the LCD panel closes. Ejecting a disc F77DAB F70DAB 1 Press the h button. The following screen appears. 2 T ouch the fo[...]

Ejecting an SD memory card F77DAB F70DAB 1 Press the h button. The following screen appears. 2 T ouch the following key . Opens the LCD panel. 3 Press the middle of the SD memory card gently until it clicks. The SD memor y card is ejected. 4 Pull the SD memory card out straight. 5 Press the h button. The LCD panel closes. Connecting and disconnecti[...]

3 T ouch the following key . Displays the “ Smartp hone Setup ” screen. 4 T ouch the item you want to set. = F or details, refer to Information on the con- nections and functions for each device on page 86. 5 T ouch the following key . F77DAB F70DAB F970DAB F9770DAB Displays the “ DAB ANTENNA POWER SETTING ” screen. Proceeds to the next ste[...]

How to use the screens Switching screens using the touch panel keys 1 2 3 4 7 8 a b 5 6 9 Engb 18 Chapter 02 Basic operation[...]

Switching screens using the hardware buttons a b 9 1 7 1 T op menu screen This is the starting menu to access the de- sired screens and operate the various func- tions. p If you press the HOME button, the T op menu screen is displayed. p “ APPS ” is displayed when AppRadio Mode or MirrorLink mode is on. p “ Android Auto ” is displayed when [...]

b Application menu screen This product can switch to the application menu, on which you can display and oper- ate the application for an iPhone or a smart- phone on the screen. p If application menus are not available, the Application menu screen will not be displayed. Supported A V source Y ou can play or use the following sources with this produc[...]

= F or details, refer to Navigation info win- dow on page 155. Selecting a front source on the A V source selection screen 1 Press the HOME button to display the T op menu screen. 2 T ouch the following key . Displays the AV source selection screen. 3 T ouch the source icon you want to se- lect. The AV operation screen of the selected source appear[...]

2 T ouch the following key . Displays the AV source selection screen. 3 T ouch and hold a source icon, and drag the icon to the desired position. p If the source icon is moved, the order of the source list is also changed. Changing the display order of source keys Y ou can change the display order of source keys on the source list. p This setting i[...]

Operating list screens 3 1 2 3 1 1 T ouching an item on the list selects the item or narrows down the options. 2 Appears when all characters are not displayed on the display area. If you touch the key, the rest of the characters are scrolled for display . 3 Appears when items cannot be displayed on a single page only . Drag the slider bar to view a[...]

On first-time startup of the navigation system When you use the navigation function for the first time, an initial setup process starts auto - matically . Follow the steps below . p Y ou can change the language and GPS log setting later using [ Regional ] and [ Usage Reports ] in the “ Settings ” screen. Other settings can be restarted later us[...]

Operating the Navigation menu screen 1 Press the MAP button. The Map screen appears. 2 T ouch the following key . Displays the navi gation me nu on the Map screen. The following screen appears. T ouch pan el keys (Page 1) 2 1 6 3 4 78 9 a 5 T ouch pan el keys (Page 2) c b d Y ou will see the following keys when you are navigating without a planned [...]

Adds a waypoint. Displays route alter- natives, parts of the route to avoid, or spe- cific roads in your planned route to avoid. Displays the route in its full length on the map, and displays route parameters and route alternatives. Deletes your route or removes a waypoint. Suspends and re- sumes the route gui- dance. Engb 26 Chapter 03 How to use [...]

Most of the information provided by your naviga- tion system can be seen on the map. Y ou need to become familiar with how information appears on the map. How to read the Map screen 5 4 1 2 3 6 7 a 9 8 p The following information marked with an asterisk (*) appears only when a route is set. p Depending on the conditions and settings, some items may[...]

Operating the Map screen Changing the scale of the map p There is a limit to map scaling in 3D map view mode. If the map scale is zoomed out further , the map is zoomed out in 2D map. = F or details, refer to Switching between 2D, 3D, and 2D North up views on page 28. 1 Press the MAP button. The Map screen appears. 2 Pinch or expand the map to zoom[...]

p For information on the controls when the scrolled map is displayed, refer to Control keys on the scrolled map on page 29. Scrolling the map to the position you want to see 1 Press the MAP button. The Map screen appears. 2 T ouch and drag the map in the desired direction to scroll. If you place the cursor on the desired location, a brief over view[...]

Understanding the route guidance Once the route guidance begins, the system provides various guides by voice, text indica- tions and signs. Frequently shown route events Icon Meaning T urn left. T urn right. T urn back. Bear right. T urn sharp left. Keep left. Continue straight tho ugh the inter- section. Go left on the roundabout, 3rd exit (next m[...]

If you are approaching a complex intersection and the necessar y information exists, the map is replaced with a 3D view of the junction. Signposts Junction view p If the data for these items is not contained in the map data, the information is not available even if there are signs on the ac- tual road. When you set “ Offer Motorway Services ” t[...]

When a GPS position is available, the triangu- lar mark is displayed in full colour . When there is no GPS position, the triangular mark is transparent. It shows your last known position. Engb 32 Chapter 04 How to use the map[...]

CAUTION For safety reasons, these route-setting functions are not available while your vehicle is in motion. T o enable these functions, you must stop in a safe place and put on the handbrake. p Some information regarding traffic regula- tions depends on the time when the route calculation is per formed. Thus, the infor- mation may not correspond w[...]

After touching [ Select as Destination ], the “ Route Summary ” screen appears and count- down begins. When the countdown ends, the guidance automatically starts. If the screen is touched anywhere during the countdown, the countdown stops and the screen will stay as it is. = F or details on the operations in the “ Route Summary ” screen, re[...]

= F or details on the operations in the “ Route Summary ” screen, refer to Checking route information and preferences on page 44. 8 T ouch [Start Navigation]. Y our navigation system starts the route gui- dance. = F or details of the route guidance, refer to Understanding the r oute guidance on page 30. Searching for POIs by categories or direc[...]

# If you touch , you can change the sort method of the results. 9 T ouch [Select as Destination] on the “ Map Location ” screen. = F or details on the operations in the “ Map Location ” screen, refer to Using the “ Map Location ” screen on page 41. After touching [ Select as Destination ], the “ Route Summary ” screen appears and co[...]

= F or details on the operations in the “ Route Summary ” screen, refer to Checking route information and preferences on page 44. 8 T ouch [Start Navigation]. Y our navigation system starts the route gui- dance. = F or details of the route guidance, refer to Understanding the r oute guidance on page 30. Selecting a destination from stored locat[...]

5 T ouch [Saved Routes]. The “ Saved Routes ” screen appears. 6 T ouch the entry you want. The “ Route Planner ” screen appears. p Y ou can add waypoints or change the final destination on the “ Route Planner ” screen. = F or details, refer to Building a route using “ Route Planner ” on page 42. 7 T ouch [Show Route]. After touching[...]

Smart Histor y items are shown in the “ New Route to... ” screen for easy access. Searching for a locat ion using “ Combined Search ” The “ Combined Search ” feature lets you quickly find a place by its name and search area. p The “ Combined Search ” function also searches your stored data. 1 Press the MAP button. The Map screen app[...]

10 T ouch [Start Navigation]. Y our navigation system starts the route gui- dance. = F or details of the route guidance, refer to Understanding the r oute guidance on page 30. Searching for a locat ion by the coordinates Entering a latitude and longitude pinpoints the location. 1 Press the MAP button. The Map screen appears. 2 T ouch the following [...]

4 T ouch [Select as Destination]. After touching [ Select as Destination ], the “ Route Summary ” screen appears and count- down begins. When the countdown ends, the guidance automatically starts. If the screen is touched anywhere during the countdown, the countdown stops and the screen will stay as it is. = F or details on the operations in th[...]

Modifying the route When navigation is already started, there are several ways to modify the current route. The following sections describe some of those op- tions. Building a route using “ Route Planner ” The “ Route Planner ” (or “ My Route ” ) feature lets you build your route using the list of desti- nations. Editing the list allows[...]

Changing the starting position The starting position for route can be changed from the current position. 1 Press the MAP button. The Map screen appears. 2 T ouch the following key . Displays the navi gation me nu on the Map screen. 3 T ouch [Route Planner] or [My Route]. 4 T ouch [Current GPS Position]. The pop-up menu appears. 5 T ouch [Set Start [...]

5 T ouch any of the conditions you want to display on the map. Y ou can see the approximate time required and total distance of selected route alterna- tives. T ouch any of the route alternatives to see it on the map. p If more than three route alternatives have been found, [ More Results ] appears. T ouch [ More Results ] to show the other routes.[...]

4 T ouch one of the options. 15 4 23 7 68 9 p Y ou can scroll the map by dragging the map. 1 Shows the information for a transit point on the route. T ouching the items allows you to see the location on the map. T ouch [ Avoid ] and [ Accept ] to set the location as a loca- tion to avoid. 2 Cancels the “ Route Summary ” screen and displays the [...]

W atching the simulation of the route Y ou can run a simulation of the navigation for the current route, as a demonstration. Follow the steps below . 1 Set a route to your destination. = F or details, refer to Chapter 5. 2 Press the MAP button. The Map screen appears. 3 T ouch the following key . Displays the navi gation me nu on the Map screen. 4 [...]

Storing a locat ion in “ Saved Location ” Storing your favourite locations in “ Saved Lo- cation ” allows you to save the time and effort used on re-entering this information. “ Saved Location ” can include your home lo - cation, workplace, and places you have al- ready registered. Storing your home and your workplace location Y ou can [...]

Renaming stored locations 1 Press the MAP button. The Map screen appears. 2 T ouch the following key . Displays the navi gation me nu on the Map screen. 3 T ouch the following key . Displays the “ Saved Location ” screen. 4 T ouch the following key . Displays the short cuts. 5 T ouch [Edit]. The “ Select Location to Edit ” screen appears. 6[...]

4 T ouch [Route Summary]. The “ Route Summary ” screen appears. 5 T ouch the following key . Displays the short cuts. 6 T ouch [Save Route]. The “ Save Route ” screen appears. 7 Enter the name if needed and then touch the following key . Saves the route as a new route under “ Saved Routes ” . Editing the stored route Stored routes can b[...]

= F or details, refer to “ Warnings ” settings on page 62. 1 Press the MAP button. The Map screen appears. 2 Scroll the map and select a location. The cursor appears at the selected point. 3 T ouch the following key . Displays the short cuts. # T o edit a previously saved alert point, touch . 4 T ouch [Add Alert Points]. The “ Add New Alert P[...]

The T raffic Message Channel (TMC) provides real-time traffic reports. If the navigation sys- tem is equipped with the TMC feature, you can check the traffic reports and information re- ceived. p The online function in “ T raffic ” can be used if you connect an iPhone or a smartphone that has the A VICSYNC App installed. = Be sure read Expandin[...]

When traffic incidents occur on your route The notification icon shows the status of traffic information reception. Indicates that there are no traffic incidents in your coverage area. Indicates that information on traf- fic incidents are being received. Indicates that there are no signifi- cant traffic incidents on your route. Indicates that there[...]

Checking useful information The “ Useful Information ” menu contains var- ious information to support your driving. p The online function in “ Parking ” , “ Weath- er ” and “ Fuel Prices ” can be used if you connect an iPhone or a smartphone that has the AVICSYNC App installed. = Be sure read Expanding the use of the navigation func[...]

! T rip Monitor : Checks the statistical data of your trips (for example, start time, end time, average speed, etc.). = F or details, refer to Recording your travel histor y on page 54. ! GPS Information : Displays the GPS information screen with satellite position and signal strength infor- mation. ! Fuel Consumption : Y ou can estimate the fuel c[...]

T ouching allows you to view the shortcuts and enables you to use the following func- tions. ! View on Map Shows the trip log on the map screen. ! Export T rack Log : Exports the track log currently selected to an external storage device. Setting the trip logger 1 Record the trip log. 2 Press the MAP button. The Map screen appears. 3 T ouch the fol[...]

2 T ouch the data field key . The “ T rip Computer ” screen appears. p If you touch [ T rip Summary ], the details of the current trip are displayed. T ouch [ Save T rip ] to store the current trip log. 3 T ouch the following key . Returns to the Map screen. p If you press the MAP button, you can return to the Map screen. Calculating the fuel c[...]

2 T ouch the following key . Displays the navi gation me nu on the Map screen. 3 T ouch [Useful Information]. The “ Useful Information ” screen appears. 4 T ouch [Fuel Consumption]. The “ Fuel Consumption ” screen appears. 5 T ouch [Add]. The “ Add Consumption Entry ” screen ap- pears. 6 T ouch [Current Milometer V alue] and then enter [...]

Customising the navigation settings Y ou can configure the navigation settings, and modify the behaviour of this system. 1 Press the MAP button. The Map screen appears. 2 T ouch the following key . Displays the navi gation me nu on the Map screen. 3 T ouch to show the next page. 4 T ouch [Settings]. The “ Settings ” screen appears. ! Route Pref[...]

Modifies the basic software parameters used during the initial setup process. ! SyncT ool : Starts the synchronisation tool, which makes it possible to update your maps. = F or details, refer to Getting the map up- date on page 69. Restoring the default settings Y ou can restore settings or recorded content to the default settings. 1 Press the MAP [...]

— Manoeuvre restrictions and directional constraints are taken into account when planning a route. — Roads are used only if access for taxis is allowed. — P rivate roads, resident- only roads and walkways are excluded from routes. ! Lorry : — Manoeuvre restrictions and directional constraints are taken into account when planning a route. ?[...]

Ferries When this function is turned off , the route is calculated prioritising the avoidance of ferries. Car Shuttle T rains When this function is turned off , the route is calculated prioritizing the avoidance of car shuttle trains. Car shuttle trains are used to transport vehi- cles for relatively short distances and they usually connect places [...]

Announce T raffic Info Y ou can select whether to have the navigation system announce by voice the traffic informa- tion whenever a traffic incident on your route is received. Announce System Messages When a system message appears, this naviga- tion system can read out the message. “ W ar nings ” settings IMPORT ANT ! This system is able to war[...]

! Buildings This setting shows or hides 3D city models which are 3D artistic or block representa- tions of complete city building data con- taining actual building sizes and actual positions on the map. p F or AVIC -F970DAB, AVIC -F970BT , AVIC - F9770DAB and AVIC -F9770BT , this func- tion becomes effective only when the additional map data is ins[...]

! T ouch [ Dismiss ] or just ignore the message if you want to keep the original route. ! T ouch [ Preview ] to see an over view of the original route and the detour to make the decision. Y ou can accept the detour as shown in the preview , or increase the mo - torway segment bypassed before accept- ing. ! T urn to the suggested new direction and t[...]

The time zone setting changes automati- cally if automatic change is available. Otherwise, the present setting value that you set is used. ! Manual Time Zone in Current Zone The present setting value that you set are used in the current time zone. If your vehi- cle moves to another time zone, the time zone setting changes automatically . Time Zone [...]

Save T rack Log = F or details, refer to Setting the trip logger on page 55. “ Online Services ” settings Y ou can use the “ Online Services ” settings to enable or disable connected online features. p F or details, refer to the manual for A VICSYNC on our website. = F or details, refer to Expanding the use of the navigation functions on pa[...]

10 T ouch [W arning T ype] and then touch one of the options. The following alert types are available: ! Disabled : The system does not warn you of the alert points for this category. ! Audio and Visual : Y ou will receive audible and visible warn- ings while you are approaching the points in this category. ! Visual : Y ou will receive a visible wa[...]

! P ioneer is not liable for any issues that may arise from incorrect or flawed app-based con- tent. ! The content and functionality of the supported applications are the responsibility of the App providers. What is the A VICSYNC App? The AVICSYNC App is a dynamic companion app that you can use to connect your iPhone or smartphone to a compatible P[...]

Preparations before using the A VICSYNC function 1 Download the A VICSYNC App from App Store or Google Play and install the app to your iPhone or smartphone (Android). T o find AVICSYNC App , access the App Store or Google Play and enter “ A VICSYNC ” in the search box. 2 Start the A VICSYNC App on your iPhone or smartphone (Android). 3 Connect[...]

If your devices feature Bluetooth ® technology , this product can be connected to your devices wirelessly . This section describes how to set up a Bluetooth connection. For details about connectivity with the devices featuring Bluetooth wireless technology, refer to the information on our website. p The “ Bluetooth ” menu is available only whe[...]

5 T ouch the following key . Starts searching. The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found. p Up to 20 devices will be listed in the order that the devices are found. 6 Wait until your Bluetooth device ap- pears in the list. p If you cannot find the Bluetooth device that you [...]

= F or details, refer to Switching visibility on page 73. 1 Activate the Bluetooth wireless tech- nology on your devices. p For some Bluetooth devices, no specific ac- tion is necessary to activate Bluetooth wire- less technology . For details, refer to the instruction manual of your devices. 2 Use the Bluetooth setting in the device to pair this p[...]

4 T ouch the following key . Deletes a paired device. A confirmation message appears. 5 T ouch [Y es]. The device is deleted. Connecting a registered Bluetooth device manually Connect the Bluetooth device manually in the following cases: ! T wo or more Bluetooth devices are regis- tered, and you want to manually select the device to be used. ! Y ou[...]

1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Bluetooth ” screen appears. 3 T ouch [PIN Code Input]. The “ PIN Code ” screen appears. 4 T ouch [0] to [9] to input pin code (up to 8 digits). 5 T ouch the following key . Stores the PIN code in this pro- duct. Displaying t[...]

2 T ouch the following keys in the follow- ing order . The “ Bluetooth ” screen appears. 3 T ouch [BT Software Update]. 4 T ouch [Start]. The data transfer screen is displayed. p Follow the on-screen instructions to finish updating the Bluetooth software. Displaying the Bluetooth software version If this product fails to operate properly , you [...]

CAUTION For your safety , avoid talking on the phone as much as possible while driving. If your mobile phone features Bluetooth tech- nology , this product can be connected to your mobile phone wirelessly. Using this hands-free function, you can operate this product to make or receive phone calls. This section de- scribes how to set up a Bluetooth [...]

Making a phone call Y ou can make a phone call in many different ways. Direct dialling 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Dial ” screen appears. 1 2 1 Dial pad 2 Deletes one digit. T ouch and hold to delete all digits. 3 T ouch the number keys to enter the phone [...]

Selecting a number by alphabet search mode If many phone numbers are registered in the phone book, you can search for phone num- bers by alphabet search mode. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Phone Book ” screen appears. 3 Drag the Initial Search Bar to find an[...]

3 T ouch the desired entry on the list to make a call. The dial screen appears. 4 Dialling starts. p T o cancel the call, touch . 5 T ouch the following key . Ends the call. The call ends. Using the preset dial lists Y ou can dial a number from the preset dial list. Registering a phone number Y ou can easily store up to six phone numbers per device[...]

Answering an incoming call This product informs you that it is receiving a call by displaying a message and producing a ring sound. p Y ou can set the system to automatically an- swer incoming calls. If this product is not set to automatically answer incoming calls, answer the calls manually . = F or details, refer to Answering a call automatically[...]

Changing the phone settings Answering a call automatically This product automatically answers incoming calls to the connected mobile phone, so you can answer calls while driving without taking your hands off the steering wheel. When “ Auto Answer ” is set to “ On ” , an in- coming call will be automatically answered in 5 seconds. 1 Press th[...]

% T ouch the following keys to tur n pri- vate mode on or off. T alk directly on your mobile device . Hands-free phoning Adjusting the other party ’ s listening volume T o maintain good sound quality, this product can adjust the other party ’ s listening volume. If the volume is too loud or not loud enough, use this function. % T ouch the follo[...]

! The line- of-sight distance between this pro- duct and your mobile phone must be 10 metres or less when sending and receiv- ing voice and data via Bluetooth technol- ogy . However , the actual transmission distance may be shorter than the estimated distance, depending on the usage environ- ment. ! With some mobile phones, the ring sound may not b[...]

When using an iP od / iPhone or a smartphone with this product, configure the settings of this product according to the device to be con- nected. This section describes the settings required for each device. The basic flow of iPod / iPhone or smartphone setup 1 Select the method for connecting your de- vice. = F or details, refer to Setting the dev[...]

! iP od classic 160GB (2008): V er . 2.0.1 ! iP od classic 80GB: Ver . 1.1.2 ! iP od nano (7th generation) ! iP od nano (6th generation): Ver . 1.2 ! iP od nano (5th generation): Ver . 1.0.2 ! iP od nano (4th generation): Ver . 1.0.4 ! iP od nano (3rd generation): Ver . 1.1.3 p Y ou can connect and control an iP od com- patible with this product by[...]

Information on the connections and functions for each device The settings and cables required for connecting each device, and the available sources are as follows. iPod / iPhone with a 30-pin connector Required cable (sold separately) Cable connection is not required. CD-IU201V CD-IU201S Smartphone Setup Device iPhone/iPod iPhone/iPod iPhone/iPod C[...]

iPod / iPhone with a Lightning connector Required cable (sold separately) Cable connec- tion is not re- quired. CD-IU52 ! CD -IH202 ! CD -IU52 ! Lightn ing Di- gital AV Adapter ! CD -IV202AV ! CD -IU52 ! Lightn ing to VGA Adapter Smartphone Setup Device iPhone/iPod iPhone/iPod iPhone/iPod iPhone/iPod Connection Bluetooth USB Digital AV adapter VGA [...]

Android, MirrorLink Required cable (sold separately) Cable connection is not required. CD-MU200 CD-AH200 Smartphone Setup Device Others Others Others Connection Bluetooth USB HDMI Mode — Android Auto (*1)/ MirrorLink / Off — Bluetooth connection Bluetooth connec- tion is required. Bluetooth connec- tion is required for using aha or Android Auto[...]

Y ou can listen to the radio using this product. This section describes operations for the radio. Using the touch panel keys 12 4 3 6 5 7 9 8 a 1 Displays the source list. = F or details, refer to Selecting a front source on the source list on page 21. 2 Selects a band. = F or details, refer to Selecting a band on page 90. 3 Displays the Time and d[...]

Shows the status of the song information stored in this product. p The icon is displayed on all operation screens of AV sources. Indicator Meaning Appears when the song information tag is stored in this product. Appears when the song information tag is being transferred to an iP od. 7 iT unes ® tagging indicator Indicates songs that are capable of[...]

Selecting a preset channel from the preset channel list Once you have stored broadcast channels, you can easily recall preset channels from memor y with a single touch of a key . = F or details, refer to Storing broadcast fre- quencies on page 91. 1 T ouch the preset channel list display key . 1 1 P reset channel list display key 2 T ouch the item [...]

2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [AV Source Settings]. The following screen appears. 4 T ouch [Radio Settings]. The following screen appears. 5 T ouch [Local]. The pop-up menu appears. 6 T ouch the item you want to set. FM ! Off (default): T urns the seek tuning setting off. ! Level1[...]

4 T ouch [Radio Settings]. The following screen appears. 5 T ouch [T A Interrupt] repeatedly until the desired setting appears. F77DAB F70DAB F970DAB F9770DAB ! T A OFF (default): Does not receive traffic announcements automatically . ! DAB+RDS T A : Receives traffic announcements automati- cally from DAB or RDS stations. ! RDS T A ONL Y : Receives[...]

4 T ouch [Radio Settings]. The following screen appears. 5 T ouch [News Interrupt ] repeatedly until the desired setting appears. ! Off (default): Deactivates the news programme interrup- tion function. ! On : Activates the news programme interruption function. p Y ou can cancel the news programme by changing the source. T uning into alter native f[...]

p Sound may be temporarily interrupted by another programme during an AF fre- quency search. p AF can be turned on or off independently for each FM band. Limiting stations to regional programming When AF (alternative frequency) is used to automatically retune frequencies, the regional function limits the selection to stations broad- casting regiona[...]

2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [AV Source Settings]. The following screen appears. 4 T ouch [Radio Settings]. The following screen appears. 5 T ouch [Auto PI] repeatedly until the de- sired setting appears. ! Off (default): Deactivates the Auto PI seek function. ! On : Activates th[...]

Storing song information to an iPod (iT unes T agging) = F or details, refer to Storing song information to an iP od (iT unes T agging) on page 201. Operating with the hardware buttons Press the TRK button. Y ou can move up or down the preset chan- nels. Press and hold the TRK button. Y ou can per form seek tuning. Engb 97 Chapter 14 Using the radi[...]

F77DAB F70DAB F970DAB F9770DAB Y ou can listen to the Digital Audio Broadcast- ing using this product. This section describes operations for Digital Audio Broadcasting. For improved DAB reception, ensure a DAB aerial with phantom power input (active type) is used. Pioneer recommends using “ AN- DAB1 ” or “ CA-AN-DAB.001 ” (active aerial sol[...]

b Reca lls the preset channel stored to a key from memory with a single touch of the key . Stores the current broadcast frequency to a key for later recall by continuing to touch the key . = F or details, refer to Storing broadcast fre- quencies on page 101. Reading the screen 7 6 3 2 4 5 1 1 Band indicator Shows the tuned band: DAB1, DAB2 or DAB3.[...]

p If the list is automatically updated while the list is displayed, the updated information will be displayed the next time the list screen is displayed. 1 T ouch the following key . Displays the list screen. 2 T ouch the category you want. Y ou can select a channel from the following categories. ! Service : Y ou can select a Ser vice Component fro[...]

Seek tuning % T ouch and hold one of the following keys for about one second and then re- lease. Scans frequencies until it finds a broad- cast strong enough for good reception. Y ou can cancel seek tuni ng by touching either key briefly. If you keep holding either key , you can skip broadcasting frequencies. Seek tuning will start when you release[...]

The “ System ” screen appears. 3 T ouch [AV Source Settings]. The following screen appears. 4 T ouch [DAB Settings]. The following screen appears. 5 T ouch [Service Follow] repeatedly until the desired setting appears. ! On (default): Enables automatic channel switching. ! Off : Disables automatic channel switching. Switching to a similar chann[...]

[...]

Y ou can play a normal music CD, Video- CD or DVD-V ideo using the built-in drive of this pro - duct. This section describes these operations. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. T o view video images, you must stop in a safe place and apply the handbrake. Using the touch panel keys (for audio)[...]

9 Changes the playback point by dragging the key . = F or details, refer to Operating the time bar on page 23. a Switches the media file type. = F or details, refer to Switching the media file type on page 108. b Switches between playback and pause. c Uses “ Sound Retriever ” function. = F or details, refer to Setting the “ Sound Retriever ?[...]

Reading the screen (for audio) Example: CD 4 3 1 2 Reading the screen (for video) Example: DVD 9 8 3 1 7 6 5 Example: Video- CD 3 1 a 4 2 1 Cur rent time and date 2 Playback condition indicator Indicates the current playback condition. Playing tracks in random order Indicator Meaning Does not play tracks in random order . Plays all tracks in the cu[...]

Starting procedure 1 Display the A V source selection screen. = F or details of the operations, refer to Dis- playing the A V operation screen on page 20. 2 Insert the disc you want to play into the disc-loading slot. The source changes and then playback will start. = F or details, refer to Inserting and ejecting a disc on page 15. p If the disc is[...]

Repeats all files. ! : Repeats just the current chapter . ! : Repeats just the current title. Switching the media file type When playing a digital media containing a mixture of various media file types, you can switch between media file types to play. 1 T ouch the following key . Displays the pop-u p menu for selecting a media file type to play on [...]

Switching the subtitle language Y ou can switch the subtitle language while a disc is playing when the disc has multilingual data (multi-subtitle). % T ouch the following key repeatedly until the desired setting appears. Changes the subti tle langua ge. Y ou can specify the desired lan- guage as the default subtitle lan- guage. = For details, refer[...]

Resuming playback (Bookmark) The Bookmark function lets you resume play- back from a selected scene the next time the disc is loaded. % T ouch the following key . Bookmarks one point for each of up to five discs. p If you tr y to memorise another point for the same disc, the older bookmark will be over- written by the new one. p T o clear the bookm[...]

! Mix : Mixing lef t and right p This function is not available when disc playback has been stopped. p The appearance of this key changes accord- ing to the current setting. Operating with the hardware buttons Press the TRK button. Y ou can skip tracks or chapters forward or backward. Press and hold the TRK button. Y ou can per form fast reverse or[...]

Y ou can play compressed audio files stored in a disc or an external storage device (USB, SD) using the built-in drive of this product. This section describes how . = F or details, refer to Media compatibility chart on page 224. Using the touch panel keys Example: USB Playback screen (page 1) 124 3 9 5 6 7 8 d c ab a Playback screen (page 2) 9 e f [...]

p This function is available only when playing files in an external storage de- vice (USB, SD) in the Music Browse mode. Reading the screen Example: USB 5 2 4 3 1 1 Cur rent file information Music Browse mode ! Song title / File name Shows the title of the song currently playing (when available). If the title of a song is not available, the file na[...]

Setting a repeat play range (for Folder Browse mode) Indicator Meaning Repeats just the curren t file. Repeats just the curren t folder . Repeats all compressed audio files. 5 Play time indicator Shows the elapsed playing time within the current file. Starting procedure (for Disc) 1 Display the A V source selection screen. = F or details of the ope[...]

If connecting an external storage device (USB, SD), this product accesses the database of music files with tag information and switches to the Music Browse mode automatically. Folder Browse mode Displays a folder name and file name in the current file information display area on the AV operation screen. Select when you want to search for folders or[...]

% T ouch the following key repeatedly until the desired setting appears. T urns random play on or off. ! (default): Does not play files in random order . ! : Plays all audio files in the current repeat play range in random order . p If you turn random play on when the re- peat play range is set to the current file in the Music Browse mode, the repe[...]

Y ou can play compressed video files stored on a disc or in an external storage device (USB, SD) using the built-in drive of this product. This section describes how . = F or details, refer to Media compatibility chart on page 224. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. T o view video images, you [...]

Reading the screen Example: Disc 3 2 1 1 Cur rent time and date 2 Play time indicator Shows the elapsed playing time within the current file. 3 Cur rent file information ! : File name Shows the name of the file currently playing. ! : Folder name Shows the name of the folder contain- ing the file currently playing. Starting procedure (for Disc) 1 Di[...]

2 T ouch a file on the list to play back. p Files are played back in file number order and folders are skipped if they contain no files. (If folder 01 (root folder) contains no files, playback commences with folder 02.) p T ouching a folder on the list shows its con- tents. Y ou can play a file on the list by touching it. # T ouch the playback sign[...]

Y ou can view still images (JPEG images) stored in an external storage device (USB, SD) using the built-in drive of this product. This section describes how . Using the touch panel keys Example: USB 13 2 4 5 8 a b c d e f 9 9 6 7 1 Displays the source list. = F or details, refer to Selecting a front source on the source list on page 21. 2 Displays [...]

3 T ouch [USB] or [SD] on the AV source selection screen. The image is displayed on the screen. 4 Use the touch panel keys on the screen to control the exter nal storage device (USB, SD). = F or details, refer to Using the touch panel keys on page 120. p Playback is performed in order of folder numbers. Folders are skipped if they con- tain no play[...]

p This setting is available during playback of the JPEG files. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Video Setup ” screen appears. 3 T ouch [Time Per Photo Slide]. The pop-up menu appears. 4 T ouch the item you want to set. ! 10 sec (default): JPEG images switch at [...]

For iPod with a 30-pin connector users p Depending on your iPod , there may not be any output unless you use a USB inter face cable for iP od / iPhone (CD-IU201S/CD- IU201V) (sold separately). Be sure to use a USB inter face cable for iPod / iPhone (CD- IU201S/CD-IU201V) (sold separately) to connect your iP od. iP od audio and/or video sources are [...]

= F or details, refer to Setting the time and date on page 201. 3 Displays the Setting menu screen. 4 Reca lls equaliser curves. = F or details, refer to Using the equaliser on page 181. 5 Selects a track from the list. = F or details, refer to Selecting song or video sour ces fro m the playlist scr een on page 126. 6 Switches the control mode to ?[...]

Shows the title of the album of the cur- rent file (when available). “ No Title ” is displayed if there is no corresponding information. ! : Genre Shows the genre of the current file (when available). “ No Genre ” is dis- played if there is no corresponding infor- mation. 2 Cur rent time and date 3 Album artwork Album art of the current son[...]

p This icon may not be displayed when an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iP od touch (5th generation) is used. Setting a repeat play range The repeat play range can be changed by only touching a single key . % T ouch the following key repeatedly until the desired setting appears. Changes the repeat play range. ! : Repeat[...]

p The Initial Search Bar is not displayed in the top category list or the song list. 5 Release the Initial Search Bar at the de- sired alphabet. The items whose initial character is the se- lected alphabet are displayed. 6 T ouch the title of the list that you want to play . Repeat this operation until you find the de- sired song or video. 7 Start [...]

p The icon does not change when using this function with an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iP od touch (5th generation). The setting changes as follows when the icon is touched, even though the icon does not change. F aster d Slower d Normal d Faster ... Displaying lists related to the song currently playing (link searc[...]

Reading the screen 1 2 3 45 6 1 App name Shows the App name of the currently playing. 2 Song title Shows the title of the song currently being played (when available). “ No Title ” is dis- played if there is no corresponding informa- tion. 3 Artist name Shows the artist name for the song currently being played (when available). “ No Name ” [...]

F77DAB F70DAB If an Android Auto -compatible device is con- nected to this product, you can listen to the music output from the Android device with this product, and control the playback directly from this product. p This function is available only when Android Auto is turned on. Start the Android Auto before using this function. = F or details, re[...]

Setting a repeat play range Indicator Meaning Repeats all songs in the se- lected list. Repeats just the current song. p Playback condition indicators may not be displayed depending on the Android device. 5 Play time indicator Shows the elapsed playing time within the current file. Starting procedure 1 Start up Android Auto. = F or details, refer t[...]

WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your juris- diction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Usi[...]

p If you press the HOME button twice, the App control side bar will disappear . Press the HOME button twice again, and the App control side bar will appear . Starting procedure When connecting an iPhone or smartphone to this product, you must select the method for connecting your device. Settings are required according to the connected device. = F [...]

6 T ouch the desired application icon. The desired application is launched, and the application operation screen appears. 7 Operate the application. 8 Press the HOME button to go back to the T op menu screen. For smartphone users F77DAB 1 Register your smartphone and connect it to this product via Bluetooth wireless technology . p The registered de[...]

1 2 3 4 5 6 7 1 Enters the characters. 2 Deletes the entered text one letter at a time, beginning at the end of the text. 3 Confirms the entr y and allows you to pro- ceed to the next step. 4 Hides the keyboard and the text can now be entered using the keyboard of the iPhone. 5 Changes the iPhone keyboard layout. p The iPhone keyboard layouts that [...]

Displaying the image of your application (iPhone with 30-pin connector) Y ou can set an image of an application for iPhone , which is not compatible with AppRadio Mode , to be shown on the screen. p Depending on the type of application, you may not be able to see the image on the screen. p Y ou can only control the application on the connected devi[...]

p When you touch the display in this func- tion, “ Don ’ t T ouch ” mark appears on the upper right corner of the screen. 1 Connect your smartphone to this pro- duct via the separately sold App Connectiv- ity Kit (CD-AH200). p The cable connection method varies de- pending on your device. = F or details of the connections, refer to the Instal[...]

Starting procedure When connecting an Android Auto -compati- ble device to this product, you must select the method for connecting your device. Settings are required according to the connected de- vice. = F or details, refer to Chapter 13. p T urn off the AVICSYNC App function for using Android Auto . p T o achieve optimum usability of Android Auto[...]

p Y ou cannot adjust the volume of the main sound on the screen. T ouch the VOL ( + / – ) button to adjust the volume of the main sound. p The volume menu is displayed for four sec- onds. If the screen disappears, touch the VOL ( + / – ) button again. The screen reap- pears. Using MirrorLink mode When you connect a MirrorLink device with compat[...]

5 T ouch the desired application icon. The desired application is launched, and the application operation screen appears. p Some applications may not launch depend- ing on the state of the connected device. If it does not launch, launch the application according to the application startup mes- sage. 6 Operate the application. 7 Press the HOME butto[...]

WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your juris- diction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing. Whe[...]

7 P erforms additional functions of each sta- tion or content currently playing. p The icons displayed var y depending on each station or content. Indicator Meaning T ouching the key discloses the current car location through Aha Radio. T ouching the key retweets the selected tweets with your T witter account. T ouching the key per forms fast rever[...]

For iPhone with a Lightning connector users 1 Unlock your iPhone. 2 Connect your iPhone. F77DAB p Connect via USB, Bluetooth, or HDMI and Bluetooth . = F or details of the Bluetooth connection, refer to Registering your Bluetooth de- vices on page 70. p The cable connection method varies de- pending on your device. = F or details of the connections[...]

5 Use the touch panel keys on the screen to control Aha Radio. = F or details, refer to Using the touch panel keys on page 141. Operating with the hardware buttons Press the TRK button. Y ou can skip contents for ward or backward. Engb 144 Chapter 23 Using Aha Radio[...]

Y ou can control a Bluetooth audio player . p Before using the Bluetooth audio player , you must register and connect the device to this product. = F or details, refer to Registering your Bluetooth devices on page 70. p Operations may var y depending on the Bluetooth audio player . p Depending on the Bluetooth audio player connected to this product[...]

a Plays files in random order . = F or details, refer to Playing files in ran- dom or der on page 147. b Sets a repeat play range. = F or details, refer to Setting a repeat play range on page 147. c Switches between playback and pause. Reading the screen 4 1 2 3 1 Cur rent time and date 2 File number indicator Shows the file number currently playin[...]

Selecting files from the file name list The file name list lets you see the list of track titles for the Bluetooth audio player and lets you select one of them to play back. p This function is only available when the connected Bluetooth audio player supports AVRCP 1.4. 1 T ouch the following key . Displays the file name list. The following screen a[...]

F77DAB Y ou can display the video image output by the device connected to this product. This section describes operations for an HDMI source. p A High Speed HDMI ® Cable (sold sepa- rately) is required for connection. = F or details of the connection method, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewe[...]

Y ou can display the video image output by the device connected to this product. This section describes operations for an AUX source. p A Mini-jack AV cable (CD -RM10) (sold sepa- rately) is required for connection. = F or details of the connection method, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed w[...]

4 Confirm that “ AUX Input ” is turned on. p The default setting is “ On ” . 5 Display the A V source selection screen. = F or details of the operations, refer to Dis- playing the A V operation screen on page 20. 6 T ouch [AUX] on the A V source selection screen. The image is displayed on the screen. 7 Use the touch panel keys on the screen[...]

Y ou can display the video image output by the device connected to this product. = F or details of the connection method, refer to the Installation Manual. CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. T o view video images, you must stop in a safe place and apply the handbrake. Using the touch panel key[...]

6 Display the A V source selection screen. = F or details of the operations, refer to Dis- playing the A V operation screen on page 20. 7 T ouch [AV] on the AV source selection screen. The image is displayed on the screen. 8 Use the touch panel keys on the screen to control the exter nal unit. = F or details, refer to Using the touch panel keys on [...]

MIXTRAX is original technology for creating non-stop mixes of selections from your audio librar y , complete with DJ effects that make them sound as if a DJ is right there with you playing the music. p Y ou can turn MIXTRAX on by touching [ MIXTRAX ] on the playback screen of com- pressed audio files. = F or details, refer to Using the touch panel [...]

2 T ouch the following key . Displays the “ Playback not al- lowed ” screen. 3 T ouch [Songs], [Artists] or [Albums]. 4 T ouch the box on the left of the item or song that you do not want to play . An icon is displayed. Items displayed with the icon will not be played. # If you touch [ Unselect All ], all the selections are cancelled. # If you [...]

Navigation info window Y ou can set whether to display the guidance information of the navigation on the AV opera- tion screen. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Navigation Related Settings]. The following screen appears. 4 T o[...]

3 T ouch [AV Source Settings]. The following screen appears. 4 T ouch [Radio Settings]. The following screen appears. 5 T ouch [FM Step] repeatedly until the desired setting appears. ! 100kHz (default): Switches to 100 kHz. ! 50kHz : Switches to 50 kHz. p If [ T A Interrupt ] and [ Alternative FREQ ] are set to “ Off ” , the seek step is set to[...]

Activating the Bluetooth audio source Y ou need to activate the Bluetooth audio source in order to use a Bluetooth audio player . 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [AV Source Settings]. The following screen appears. 4 T ouch [Bl[...]

! Source : Displays the video image output by the con- nected external device. ! Camera : Displays the image output by the connected external camera. p If “ Camera ” is selected, “ 2nd Camera Input ” is automatically set to “ On ” . p If “ Off ” or “ Source ” is selected, “ 2nd Cam- era Input ” is automatically set to “ Of[...]

Setting the polarity of the rear view camera 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Camera settings]. The following screen appears. 4 T ouch [Camera Polarity] repeatedly until the desired setting appears. ! Battery (default): When t[...]

Setting the camera for Camera View mode T o display Camera View at all times, “ Camera View ” needs to be set to “ On ” . p T o set the rear view camera for Camera View mode, “ Back Camera Input ” needs to be set to “ On ” . = F or details, refer to Setting rear view camera activation on page 158. p T o set the second camera for Cam[...]

4 T ouch [Parking Assist Guide] repeatedly until the desired setting appears. ! Off (default): Hides the guidelines. ! On : Displays the guidelines. When the gearstick is aligned to the REVERSE (R) position after setting the rear view camera, the rear view image appears. F77DAB F70DAB F970DAB F9770DAB 1 1 Switches the display to the “ Parking Ass[...]

6 T ouch [Parking Assist Guide Adjust]. The following screen appears. 7 Set the guidelines by dragging the four points. 8 T ouch the following keys to adjust the position of the point if necessary . Moves the point to the left. Moves the point to the right. Moves the point upward. Moves the point downward. Extends the line to the lef t and right fr[...]

4 T ouch [2nd Camera Input] repeatedly until the desired setting appears. ! Off (default): T urns the second camera input setting off . ! On : T urns the second camera input setting on. p The confirmation message appears if set- ting “ 2nd Camera Input ” to “ On ” while the AV source is on. The AV source will turn off if “ Ye s ” is sel[...]

Activates the safe mode function. ! Off : Deactivates the safe mode function. T ur ning off the demo screen If the demo screen appears, per form the fol- lowing procedure to turn off the demo screen. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T[...]

2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [Climate Reverse] repeatedly until the desired setting appears. ! Off (default): Does not reverse the climate control status display . ! On : Reverses the climate control status dis- play . Setting the keyboard language with the application for iPhone[...]

2 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 3 T ouch [T ouch Panel Calibration]. The touch panel adjustment screen appears. 4 T ouch two corners of the screen along the arrows, and then touch the centres of two + marks at the same time twice. 5 Press the HOME button. The adjustment results are saved. 6 [...]

Setting whether to activate the dimmer function Y ou can set whether to activate the dimmer function at nighttime. p This function is available only when “ Dim- mer T rigger ” is set to “ Manual ” . = F or details, refer to Setting the dimmer function on page 166. 1 Press the HOME button to display the T op menu screen. 2 T ouch the followi[...]

Adjusting the picture Y ou can adjust the picture for each source, the Application screen, and rear view camera. CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. T o en- able these functions, you must stop in a safe place and apply the handbrake. Refer to Impor- tant Information for the User (a sep[...]

p The setting contents can be memorised se- parately for the following screens and video images. — DVD , Video-CD and Disc — AV and external camera — USB (Video) and USB (JPEG) — SD (Video) and SD (JPEG) — iPod (iPod with a 30-pin connector) — iPod (Video) and AppRadio Mode (iP od with a 30-pin connector) — HDMI and AppRadio Mode (HDM[...]

5 T ouch the following keys in the follow- ing order . The “ System ” screen appears. 6 T ouch [System Information]. The following screen appears. 7 T ouch [Firmware Update]. The “ Firmware Update ” screen appears. 8 T ouch [Continue] to display the data transfer mode. p Follow the on-screen instructions to finish updating the firmware. p T[...]

Sensor learning situations for distance ( Distance ), right turns ( Right T urn ), left turns ( Left T urn ) and 3D detection ( 3D ) are indicated by the length of the bars. p When the tyres have been changed or chains have been fitted, turning on the Speed Pulse allows the system to detect the fact that the tyre diameter has chan- ged, and automat[...]

7 6 1 GPS Antenna Indicates the connection status of the GPS aerial, the reception sensitivity, and from how many satellites the signal is received. Colour Signal com- munication Used in posi- tioning Orange Y es Y es Y ellow Y es No p When the GPS aerial is connected to this product, “ OK ” is displayed. When the GPS aerial is not connected to[...]

Using fader/balance adjustment Y ou can select a fader/balance setting that provides an ideal listening environment in all occupied seats. p This function is available only when main audio is available. p This function is available only when “ Rear Speaker ” is set to “ On ” . = F or details, refer to Adjus ting the front and r ear speaker [...]

4 T ouch the following keys to adjust the left/right speaker balance. Moves towards the left. Moves towards the right. Each time you touch the keys, the left/right speaker balance moves towards the left or right. p “ Left25 ” to “ Right25 ” is displayed as the left/right speaker balance moves from the left to right. p The default setting is[...]

The following AV sources are set to the same source level adjustment volume automatically. F77DAB Required cable (sold separately) Smartphone Setup AV sources Device Connection iP od / iPhone with a 30-pin connector CD-IU201V iPhone/iPod USB USB1 iPod1 aha CD-IU201S iPhone/iPod USB USB1 aha iPod1 AppRadio Mode iP od / iPhone with a Lightning connec[...]

p When a USB storage device is connected to USB port 1 or USB port 2, the source level adjustment volume is automatically set to the same level as the USB port to which the device is connected. The source level ad- justment volume that is automatically set varies depending on whether the device is connected to USB port 1 or USB port 2. p When an iP[...]

5 T ouch the following keys to select “ Front ” or “ Rear ” . Selects the adjus table previous speak- er . Selects the adjus table next speaker . 6 T ouch [HPF] to tur n on. 7 Drag the line graph horizontally to ad- just the range of cut-off frequency from “ 50 ” Hz to “ 200 ” Hz. p The default setting is “ 100 ” Hz. 8 Drag the [...]

The “ Audio ” screen appears. 3 T ouch [Listening Position]. The “ Listening Position ” screen appears. 4 T ouch the desired position. ! Off (default): Changes the listening position setting to off . ! Front : Changes the listening position setting to front. ! Front-L : Changes the listening position setting to front left. ! Front-R : Chang[...]

Changes the speaker level of the front right speaker . ! Rear Left : Changes the speaker level of the rear left speaker . ! Rear Right : Changes the speaker level of the rear right speaker . ! Subwoofer : Changes the speaker level of the subwoofer speaker . # If you touch [ Apply Auto EQ ], the result of “ A-EQ&T A Measurement ” will be app[...]

6 T ouch the following keys to input the distance between the selected speaker and the listening position. Decreases the distanc e between the se- lected speaker and the selected listen- ing position. Increases the distance between the se- lected speaker and the selected listen- ing position. p “ 0.0 ” cm to “ 500.0 ” cm is displayed as the[...]

Using the equaliser The equaliser lets you adjust equalisation to match the vehicle interior acoustic character- istics as desired. Recalling equaliser curves There are seven stored equaliser cur ves that you can easily recall at any time. Here is a list of the equaliser cur ves: Equaliser curve S.Bass is a cur ve in which only low-pitched sound is[...]

Using the auto-adjusted equaliser Y ou can set the auto -adjusted equaliser to suit the vehicle ’ s acoustics. T o use this function, the vehicle ’ s acoustics must be measured in advance. = F or details of the operations, refer to Adjust- ing the equaliser cur ve automatically (Auto EQ) on page 182. p T o manually adjust the equaliser cur ve, [...]

! When this product is connected to a power amp with an LPF (low pass filter), turn the LPF off before per forming Auto EQ. Also, set the cut-off frequency for the built-in LPF of an active subwoofer to the highest fre- quency . ! The distance has been calculated by a computer to provide optimum delay to en- sure accurate results. Do not change thi[...]

6 Press the HOME button to display the T op menu screen. 7 T ouch the following keys in the follow- ing order . The “ Audio ” screen appears. 8 T ouch [A-EQ&T A Measurement]. The “ A-EQ&T A Measurement ” screen ap- pears. 9 Connect the microphone for acoustical measurement (sold separately) with this product. F77DAB F70DAB Plug the [...]

Selecting the background display The background display can be selected from 8 different preset displays for the AV operation screen and 5 different preset displays for the T op menu screen. Furthermore, you can change the background display to other images imported from an external storage de- vice (USB, SD). 1 Press the HOME button to display the[...]

p Y ou can also change the screen for settings by touching [ Illumination ], [ Theme ]o r [ Clock ] on this screen. 4 T ouch the following key . Displays the list of the backgr ound dis- play images store d on the external sto - rage device (USB, SD). 5 T ouch the desired external storage de- vice (USB, SD). The following screen appears. 6 T ouch t[...]

Creating a user -defined colour Y ou can create a user-defined colour . The cre- ated colour is stored, and you can select the colour when setting the illumination colour the next time. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Theme ” screen appears. 3 T ouch [Illumina[...]

Selecting the clock image The clock on the AV operation screen and the T op menu screen can be selected from 3 differ- ent images. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Theme ” screen appears. 3 T ouch [Clock]. The following screen appears. p Y ou can also change th[...]

1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Theme ” screen appears. 3 T ouch [Splash Screen]. The following screen appears. 4 T ouch the following key . Displays the list of the splash screens stored on the external storage device (USB, SD). 5 T ouch the desired external [...]

5 T ouch the desired item. ! Illumination : Selects the illumination colour setting. ! Splash Screen : Selects the splash screen setting. ! Select All : Selects all settings. 6 T ouch [Export]. Data export starts. After the data is exported, a completion mes- sage appears. p The source is turned off and the Bluetooth connection is disconnected befo[...]

Setting the top-priority languages Y ou can assign the top-pri ority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are dis- played or output in that language. p This setting is available only when “ Disc ” is selected as the source. Setting [...]

p If the selected language is not available, the language specified on the disc is applied. p Y ou can switch the audio language by touching the audio language switching key during playback. p The setting made here will not be affected even if the audio language is switched dur- ing playback using the audio language switching key. Setting the menu [...]

Setting the aspect ratio There are two kinds of displays. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. If you use a regular rear display with a TV aspect of 4:3, you can set the aspect ratio suitable for your rear display. (We recommend use of this function only when you want[...]

3 T ouch [DVD/DivX Setup]. The following screen appears. 4 T ouch [Parental]. The “ Parental ” screen appears. 5 T ouch [0] to [9] to input a four -digit code number . 6 While the input number is displayed, touch the following key . Registers the code number . 7 T ouch any number between [1] to [8] to select the desired level. ! 8 : Enables pla[...]

5 T ouch [Registration Code]. Y our 10-digit registration code is displayed. p Make a note of the code as you will need it when you register with a DivX VOD provider . Displaying your DivX VOD deregistration code A registration code registered with a deregis- tration code can be deleted. p This setting is available only when “ Disc ” is selecte[...]

p Y ou can operate this function only for the video signal input into the AV input. 1 Press the HOME button to display the T op menu screen. 2 T ouch the following keys in the follow- ing order . The “ Video Setup ” screen appears. 3 T ouch [Video Signal Setting]. The following screen appears. 4 T ouch [Camera]. The pop-up menu appears. 5 T ouc[...]

Language code chart for DVDs T wo -letter code, input code Language T wo -letter code, input code Language T wo -letter code, input code Language aa, 0101 Afar ie, 0905 Interlingue rn, 1814 Rundi ab, 0102 Abkhazian ik, 0911 Inu piaq ro, 1815 Romanian af , 0106 Afrikaans in, 0914 Indonesian ru, 1821 Russian am, 0113 Amharic is, 0919 Icelandic rw, 18[...]

Registering your favourite menu items in shortcuts allows you to quickly jump to the re- gistered menu screen by a simple touch on the “ Favorites ” screen. p Up to 12 menu items can be registered in the favourite menu. Creating a shortcut 1 T ouch the HOME button to display the T op menu screen. 2 T ouch the following key . Displays the Sett i[...]

F77DAB F70DAB F970DAB F9770DAB By connecting the optional Vehicle Bus adap- ter , you can display the operation status of the vehicle ’ s parking sensor function and climate control panel on the screen. CAUTION ! For information on installing the V ehicle Bus adapter , see the operating manual of the Vehi- cle Bus adapter . ! After installing the[...]

a9 b c 6 8 7 3 45 2 1 1 Displays that the rear window heating setting is on. 2 Displays that the front window heating setting is on. 3 Displays that the internal circulation mode setting is on. 4 Displays that the A/C setting is on. 5 Displays that the dual A/C function is on. 6 The previous screen returns. p If you do not operate the climate contr[...]

Setting the time and date Y ou can change the date display format and the time format. 1 T ouch the current time on the screen to display the Time and date setting screen. The following screen appears. 2 T ouch the item you want to set. Month/Date ! d/m (default): Changes the date display format to date/ month. ! m/d : Changes the date display form[...]

! USB2 : T ransfers the song information to your iPod which is connected to USB port 2. 5 T une into a broadcast station. When the song information is received, is displayed while the desired song is being broadcast, and the touch panel key becomes active. = F or details, refer to iT unes ® tagging indi- cator on page 90. = F or details, refer to [...]

A 4:3 picture is enlarged in the horizontal direction only , enabling you to enjoy a 4:3 TV picture (normal picture) without any omissions. p This setting is for video only . ! Zoom A 4:3 picture is enlarged in the same pro- portion both vertically and horizontally; ideal for a wide screen picture. p This setting is for video only . ! Normal A 4:3 [...]

Selecting the video for the rear display Y ou can choose either to show the same image as the front screen or to show the se- lected source on the rear display . p This function is not available during a call via this product or while using the voice re- cognition function. 1 Press the HOME button to display the T op menu screen. 2 T ouch the follo[...]

3 T ouch Area1, followed by Area2, and then touch and hold Area3. Area1 Area2 Area3 The “ Anti-theft Setting Menu ” screen ap- pears. 4 T ouch [Set Password]. The “ Password Entry ” screen appears. 5 Enter the password you want to set. p 5 to 16 characters can be entered for a password. 6 T ouch [Go]. The “ Hint Entry ” screen appears. [...]

8 T ouch [Go]. A message indicating that the security setting is cancelled appears. Forgotten password Contact the nearest authorised Pioneer Ser- vice Station. Restoring this product to the default settings Y ou can restore settings or recorded content to the default settings. V arious methods are used to clear user data. Method 1: Remove the vehi[...]

T roubleshooting If you have problems operating your navigation system, refer to this section. The most common problems are listed below , along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorised Pioneer ser vice facility. Problems with the AV screen Symptom Cause Acti[...]

Symptom Cause Action (Reference) Playback is not with the audio language and subti tle language settings selected in “ DVD/DivX Setup ” . The DVD playing does not feature dialogue or subtitles in the lan- guage selected in “ DVD/Di vX Setup ” . Switching to a sel ected language is not possi- ble if the language selected in “ DVD/DivX Setu[...]

Symptom Cause Action The smartphone was not charged. Charging stopped because the tem- perature of the smartphone rose due to prolonged use of the smart- phone during charging. Disconnect the smartph one from the cable, and wait until the smartphone cools down. More batter y power was consumed than was gained from charging. This problem may be reso[...]

Message Cause Action Detected unusual spee d pulses. The speed pulse cannot be detected correctly. Contact your dealer or an authorised Pioneer Station for assistance. Detected changes in the in- stallation angle or position. The in-dash receiver is updat- ing the sensor learning data. Changes in the installation angle or position are detected. W a[...]

Message Cause Action (Reference) Video resolution not sup- ported Files that cannot be played on this product are included in the file. Select a file that can be playe d. (Page 224, P age 237) Unable to write to flash mem- ory The playback histor y for VOD con- tents cannot be saved for some rea- son. ! Retry. ! If the message appears frequently, c[...]

Message Cause Action (Reference) USB1 was disconnected for device protection. Do not re- insert this USB memory into the unit. Press reset to restart USB memory . USB2 was disconnected for device protection. Do not re- insert this USB memory into the unit. Press reset to restart USB memory . The USB connector or USB cable is short-circuited. Check [...]

Bluetooth Message Cause Action Error -10 The power failed for the Bluetooth module of this product. T urn the ignition switch to OFF and then to ON. If the error message is still displayed af ter per- forming the above action, please contact your dealer or an author ised Pioneer Ser vice Sta- tion. Android Auto Message Cause Action (Reference) Andr[...]

Message Cause Action Communication error oc- curred. There was a comm unication error . ! Disconnect the cable from the smartphon e, and then connect the smartphone ag ain after a few seconds. ! T urn the ignition switch to OFF and then to ON. If the error message is still displayed af ter per- forming the above action, reset the smart- phone. If t[...]

Positioning techno logy Positioning by GPS The Global Positioning System (GPS) uses a network of satellites orbiting the Earth. Each of the satellites, which orbit at a height of 21 000 km, continually broadcasts radio sig- nals giving time and position information. This ensures that signals from at least three can be picked up from any open area o[...]

Map matching As mentioned, the positioning systems used by this navigation system are susceptible to certain errors. Their calculations may, on occa- sion, place you in a location on the map where no road exists. In this situation, the processing system understands that vehicles travel only on roads, and can correct your positio n by ad- justing it[...]

Conditions likely to cause noticeable positioning errors F or various reasons, such as the state of the road you are travelling on and the reception status of the GPS signal, the actual positio n of your vehicle may differ from the position dis- played on the map screen. ! If you make a slight turn. ! If there is a parallel road. ! If there is anot[...]

! If you are on a steep mountain road with many height changes. ! If you enter or exit a multi-storey car park or similar structure using a spiral ramp. ! If your vehicle is turned on a turntable or si- milar structure. ! If your vehicle ’ s wheels spin, such as on a rough track or in snow . ! If you put on chains, or change your tyres for ones w[...]

Route setting information Route search specifications Y our navigation system sets a route to your destination by applying certain built-in rules to the map data. This section provides some use- ful information about how a route is set. CAUTION When a route is calculated, the route and voice guidance for the route are automatically set. Also, for d[...]

Built-in drive and care ! Use only conventional, fully circular discs. Do not use shaped discs. ! Do not use cracked, chipped, warped, or otherwise damaged discs as they may da- mage the built-in drive. ! Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs. ! When using discs that can be printed on label sur faces, check the instruc[...]

p It is not possible to play DVD -Audio discs. This DVD drive may not be able to play all discs bearing the marks shown above. A VCHD recorded discs This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Defi- nition) format. Do not insert AVCHD discs. If inserted, the disc may not be ejected. Playing DualDisc ! DualDis[...]

! Playback of discs recorded on a computer may not be possible, depending on the re- cording device, writing software, their set- tings, and other environmental factors. ! Please record with the correct format. (F or details, please contact manufacturer of media, recorders, or writing software.) ! Titles and other text information recorded on a CD-[...]

Handling guidelines and supplemental information ! This product is not compatible with the Multi Media Card (MMC). ! Copyright protected files cannot be played back. Notes specific to DivX files ! Only DivX files downloaded from DivX part- ner sites are guaranteed for proper opera- tion. Unauthorised DivX files may not operate properly. ! DRM renta[...]

Media compatibility chart General Media CD-R/-RW DVD-R/-R SL/-R DL/DVD -RW USB storage de- vice SD memory card File system ! ISO966 0 level 1 ! ISO966 0 level 2 ! Romeo, Joliet ! UDF 1.02 / 1.50 / 2.00 / 2.01 / 2.50 ! ISO9 660 level 1 ! ISO9 660 level 2 ! Romeo, Joliet ! UDF 1.02 / 1.50 / 2.00 / 2.01 / 2.50 FA T16/FA T32/NTFS Maximum number of fold[...]

WMA compatibility Media CD-R/-RW DVD-R/-R SL/-R DL/DVD -RW USB storage de- vice SD memory card File exte nsion .wma Bit rate 5 kbps to 320 kbps (CBR), VBR Sampling frequency 8 kHz to 48 kHz Note: This product is not compatible with the following: Windows Media ™ Audio 9 Professional, Lossless, Voice WA V compatibility Media CD-R/-RW DVD-R/-R SL/-[...]

[...]

Video files compatibility (USB, SD) File extension .avi .mkv .mov .f4v .mp4 Compatible video codec MPEG-4, H.264, H.263, Xvid MPEG-4, H.264, VC -1, Xvid MPEG-4, H.264, H.263 H.264, H.263 MPEG-4, H.264, H.263 Compatible audio codec MP3, AAC, LPCM MP3, AAC, Vor- bis MP3, AAC MP3, AAC MP3, AAC Maximum frame rate 30 fps Maximum file size 4 GB Maximum p[...]

Example of a hierarchy The following figure is an example of the tier structure in the disc. The numbers in the fig- ure indicate the order in which folder numbers are assigned and the order to be played back. : Folder :F i l e 1 2 3 4 5 6 L e v e l 1 L e v e l 2 L e v e l 3 L e v e l 4 Notes ! This product assigns folder numbers. The user cannot a[...]

AAC AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Sev- eral applications can be used to encode AAC files, but file formats and extensions differ de- pending on the application which is used to encode. This unit plays back AAC files en- coded by iT unes . Google, Google Pla[...]

Lightning Lightning is a trademark of Apple Inc. App Store App Store is a ser vice mark of Apple Inc. iOS iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries. iT unes iT unes is a trademark of Apple Inc., registered in the U.S. and other countries. Using app-based connected content IMPORT ANT Requiremen[...]

HDMI The terms HDMI and HDMI High-Definition Multimedia Inter face, and the HDMI Logo are trademarks or registered trademarks of HDMI Licensing, LLC in the United States and other countries. MHL MHL, the MHL Logo, and Mobile High-Defini- tion Link are trademarks or registered trade- marks of MHL, LLC in the United States and other countries. IVONA [...]

Using the LCD screen correctly Handling the LCD screen ! When the LCD screen is subjected to direct sunlight for a long period of time, it will be- come ver y hot, resulting in possible da- mage to the LCD screen. When not using this product, avoid exposing it to direct sunlight as much as possible. ! The LCD screen should be used within the temper[...]

Display information Phone menu Page Preset Dial 79 Phone Book 77 History 78 Dial 77 V oice recognition function 82 System menu Page Navigation Related Settings Navigation info wind ow 155 A V/App Guide Mode 155 AV Source Settings MIXTRAX Settings 154 Radio Settings 91 92 93 94 95 96 155 DAB Settings 101 156 T ag Forwarding 201 Bluetooth Audio 157 E[...]

Page Camera View 160 Back Camera Input 158 2nd Camera Input 162 Camera Polarity 159 Parking Assist Guide 160 Back Camera: Reverse Video 159 2nd Camera: Reverse video 163 Parking Assist Guide Adjust 161 Safe Mode 163 Demo Mode 164 System Language 164 Climate Reverse 164 Restore Settings 206 All Settings 206 Audio Settings 206 Theme Settings 206 Blue[...]

Audio menu Page Graphic EQ 181 Fader/Balance 173 Balance 173 Mute Level 174 Source Level Adjuster 174 Rear Speaker 176 Subwoofer 177 Speaker Level 178 Crossover 176 Subwoofer Settings 177 Listening Position 177 Time Alignment 179 Auto EQ&T A 182 A-EQ&T A Measurement 183 ASL 180 Video Setup menu Page DVD/DivX Setup Subtitle Language 191 Audi[...]

Bluetooth menu Page Connection 70 Auto Connect 72 Visibility 73 PIN Code Input 73 Device Information 74 Auto Answer 81 Ring T one 81 Invert Name 81 Bluetooth Memory Clear 74 BT Software Update 74 Bluetooth Version Information 75 Engb 236 Appendix Appendix[...]

Specifications General Rated power source ............... 14.4 V DC (allowable voltage range: 12.0 V to 14.4 V DC) Earthing system ....................... Negative type Maximum current consumpti on ........................................... 10.0 A Dimensions (W × H × D): AVIC -F77DAB DIN Chassis ..................... 178 mm × 100 mm × 157 mm N[...]

AVIC -F70DAB .................. 156.6 mm × 81.6 mm AVIC -F970DAB ................ 137.5 mm × 77.3 mm AVIC -F970BT .................... 137.5 mm × 77.3 mm AVIC -F9770DAB ............. 137.5 mm × 77.3 mm AVIC -F9770BT .................. 137.5 mm × 77.3 mm Pixels ............................................. 1 152 000 (2 400 × 480) Display metho[...]