Planet VDR-300NU Bedienungsanleitung

User Manual of VDR-300 NU 1[...]

Copyright Copyright  2014 by PLANET Technology Corp. All rights re serve d. No part of this publication may be reproduced, transmitted, transcribed, st ored in a retrieval system, or translate d into any language or computer language, in any form or by a ny means, electronic, mechanical, mag netic, optical, chemical, manual or otherwise, without[...]

3 This device complie s with Part 15 of the FCC Rules. Operation is subject to the Following two con ditions: (1) This device may not cause harmful interfere nce (2) This Device must accep t any interference received, includin g interference that may cause undesired operation. Federal Communication Commission (FCC) Radiation Exposure Statement This[...]

Russian Federation None Only for indoor applications WEEE regulation To avoid the potential effects on the environm ent and human health as a result of the pre sence of hazardous substances in electri cal and el ectronic equipment, end users of electrical and electronic equipment shou ld under stand the meaning of the crosse d-out wh eeled bin symb[...]

User Manual of VDR-300 NU 5 Table of Contents CHAPTER 1.PRODUCT INTRODUCTION ......................................................................... 8 1.1 Package Contents .............................................................................................................. 8 1.2 Product Description .......................................[...]

6 5.2.5 NAT ............................................................................................................................... ........... 63 5.2.6 Security ............................................................................................................................... ..... 66 5.2.7 Parental Control ....................[...]

7 5.5.5 Internet Time .......................................................................................................................... 121 5.5.6 Access Control ....................................................................................................................... 121 5.5.7 Update Software ..................................[...]

User Manual of VDR-300 NU Chapter 1.Product Introduction 1.1 Package Contents Thank you for choosing PLANET VDR-300NU. Before installing the router, please verify the contents inside the package box. VDR-300NU Quick Installation Guide CD-ROM (User Manual includ ed) Power Adapter Ethernet Cable Phone Cable 12V/2A DC output 100~240V AC input RJ-45 / [...]

User Manual of VDR-300NU 1.2 Product Description High Performance Ethernet over VDSL PLANET 802.11n Dual Band Wireless VDSL2 R ou ter, VDR-300NU, applies 2T2R MIMO antenna technology and provides office and residential users with the ideal solution for sharing a high-speed VDSL2 broadband connection and four-10/100Mbps Fast Ethernet back bo ne. The[...]

User Manual of VDR-300NU Secure Wireless Access Control To secure wireless co mmunication, the VDR-300NU su pport s most up-to-date encryptions including WEP, WPA-PSK and WPA2-PSK. Mo reover, the VDR-300NU su pports WPS configuration with P BC/PIN type for users to easily connect to a secure d wireless network. Multiple Functions for Broadband Comm[...]

User Manual of VDR-300NU Providing Superior Function The VDR-300NU provides user-friendl y management interface to be manage d easily through standard web browsers. For networking management features , the VDR-300NU n ot only provides basic router functions such as DHCP server, virtual server, DM Z, QoS, and UPnP, but also p rovides full firewall f[...]

User Manual of VDR-300NU 1.3 Product Features  Internet Access Features  Shared Internet Access: All users on the LAN can access t he Internet thro ugh the VDR-300NU using only one single external IP addres s. The local (invalid) IP addresses are hi dden from external sour ces. This pro cess is ca lled NAT (Netwo rk Address Translation).  [...]

User Manual of VDR-300NU  Wireless MAC Access Co ntrol: The Wir eless Access Contro l feature can check the MAC address (hardware addres s) of wireless station s to ensure that only trusted wireless stations can access you r LAN.  Dual-SSID: It allows users to access different networks through a single AP. 13[...]

User Manual of VDR-300NU 1.4 Product Specifications Model VDR-300NU Product Description 802.11n Dual Band Wirele ss VDSL2 Router Hardware Specifications LAN 4 x 10/100Base-TX, Auto-Negotiation, Auto MDI/MDI-X RJ45 port WAN 1 x RJ-11 Interfaces USB USB 2.0, Type-A, 5V DC/0.5A Output Antenna 2.4GHz : 2 x 2.5dBi 5GHz: 2 x 2dBi Button 1 x RESET button [...]

User Manual of VDR-300NU Protocol Features  RFC2684 multiprotocol Encapsulation over A TM Adaptation Laye r 5  RFC1483 multiprotocol Encapsulation over A TM Adaptation Laye r 5  RFC2364 PPP over A TM ALL5 (PPPoA)  RFC2516 PPP Over Ethernet (PPPoE)  RFC1662 PPP in HDLC-like Framing  RFC1332 PPP Internet Protocol Control Protocol ?[...]

User Manual of VDR-300NU Managemen t  Device Configuration, Management and Update  Web based GUI  Localization support  Embedded web server  Download image via HTTP , TFTP client, TFTP serve r , FTP serve r  Command Line Interface via serial port, telnet, or ssh  Menu-driven CLI via serial port or telnet  Universal Plug and [...]

User Manual of VDR-300NU Environment Specifications Temperature / Humidity Operating: 0~40 degrees C, 10%~ 95% (non-condensing), Storage: -20~70 degrees C, 5~95% (non -condensing) Certification CE 17[...]

User Manual of VDR-300NU Chapter 2. Hardware Installation This chapter offers informa tion about installing your router. If you are not familiar with the hardware or software parameters prese nted here, please consul t your service provider for the values neede d. 2.1 Hardware Description 2.1.1 Front Panel The front panel provides a simple interfa [...]

User Manual of VDR-300NU Figure 2-2 VDR-300NU LED Front Panel LED Definition LED Color State Description ON When the router is powere d on, and in ready state. Flashing The software is upgradi ng. Green OFF The device is powered off. ON The device is initiating. PWR Red Flashing The software is upgradi ng. ON The VDSL2 is connected su ccessfully. F[...]

User Manual of VDR-300NU 2.1.3 Rear Panel and Side Panel The rear panel provides th e physical connectors c onnected to the power ad apter and any other network device. Figure 2-2 and Figure 2-3 shows the rear and side panel of the VDR-300NU. Figure 2-3 VDR-300NU Rear Panel Rear Panel Port and Button Definition Connector Description POWER Power con[...]

User Manual of VDR-300NU 2.1.4 Right Side Panel Figure 2-4 VDR-300NU Side Panel Side Panel Interface and Button Definition Connector Description On/Off Power switch. USB1 For connecting the 3G net work adapter or other USB stora ge devices. WL AN WLAN switch, for enabling or disabling the WLAN function. WPS This button is used for enabling WPS PBC [...]

User Manual of VDR-300NU Chapter 3. Connecting to the Router 3.1 System Requirements  Broadband Internet Access Servic e (Cable/xDSL/Ethernet connection)  One Cable/x DSL Modem that has an RJ-45 connect or (not necessary if t he Ro uter is connected directly to the Ethernet.)  PCs with a working Ethernet Adapter and an Ethernet cable with [...]

User Manual of VDR-300NU STEP 2. Connect the Power Adapter to the VDR-300NU. Check whether the PWR LED on the front panel are on accordingly. Figure3-1 sho ws the power adapter connection diagram. Figure 3-1: VDR-300NU Po w er Adapter Connection Diagram STEP 3. Use Ethernet cable to connect “LAN” port of the router and “LAN” port of your co[...]

User Manual of VDR-300NU If you use 3G W AN service, connect the 3G USB data card to the USB port of the router . 24[...]

User Manual of VDR-300NU Chapter 4. Installation Guide 4.1 Configuring PC in Windows 7 1. Go to Start / Control Panel / Net w ork and Internet / Net w ork and Sharing Center and click Change adapter settin gs on the left banner. 2. Double-click Local Area Connection . 3. In the Local Area Connection Status window, click Properties . 4. Select Inter[...]

User Manual of VDR-300NU 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically button. 6. Click OK to finish the configuration. 26[...]

User Manual of VDR-300NU 4.2 Configuring PC in Windows XP 1. Go to Start / Control Panel (in Classic View) . In the Control Panel, double-click on Network Connections 2. Double-click Local Area Connec tion . 3. In the Local Area Connection Status window, click Properties . 4. Select Internet Protocol (TCP/IP) and click Properties . 27[...]

User Manual of VDR-300NU 5. Select the Obtain an IP address automatically and the Obtain DNS server address automatically button. 6. Click OK to finish the configuration. 28[...]

User Manual of VDR-300NU Chapter 5. System Settings Determine your Connection Settings Before you configure the router, y ou need to know the connection informatio n supplied by your Internet service provider. Connecting the VDSL 2 Router to your Network Unlike a simple hub or switch, the setup of the VDSL Router consists of more than simply pluggi[...]

User Manual of VDR-300NU 5.1 Device Information Choose Dev ice Info , and the submenus of Devi ce Info are shown below: Figure 5-1-1 5.1.1 Summary Choose Dev ice Info > Summary , and the following page appea rs. Figure 5-1-2 This page displays the device information su ch as th e board ID, software versi on, and the information of your WAN conne[...]

User Manual of VDR-300NU 5.1.2 WAN Choose Dev ice Info > WAN and the following page a ppears. Figure 5-1-3 This page displays the information of t he WAN interface. You can select from Adv anced Setup > Layer2 Interface to choose the type you need. 5.1.3 Statistics Choose Dev ice Info > St atistics , and the following page appea rs.  LA[...]

User Manual of VDR-300NU Figure 5-1-5 On this page, you can view the statistical informat ion about the recei ved and transmitted data packets of the WAN interface. Click Reset Statistics to restore th e values to zero and recount them.  xTM Choose Device Info > Statistics > xTM and the following page appears. Figure 5-1-6 On this page, yo[...]

[...]

User Manual of VDR-300NU Figure 5-1-9 When the xDSL BER Test completes, the followi ng page appears. Figure 5-1-10 If the BER reaches e-5, you cannot access the Internet. 5.1.4 Route Choose Device Info > Route a nd the following page appears. On this page, you can view the ro ute table information. Figure 5-1-11 34[...]

User Manual of VDR-300NU 5.1.5 ARP Choose Dev ice Info > ARP and the following page appea rs. Figure 5-1-12 On this page, you can view the MAC address and IP addres s information of the device connected to the router. 5.1.6 DHCP Choose Dev ice Info > DHCP and the following page appears. Figure 5-1-13 On this page, you can view the host name, [...]

User Manual of VDR-300NU 5.2 Advanced Setup Choose Advanced Se tup and the submenus of Ad vanced Setup are shown below: Figure 5-2-1 5.2.1 Layer2 Interface Choose Advanced Se tup > Layer2 Interface and the following pa ge appears.  ATM Interface Choose Advanced Setup > Layer2 Interface > ATM Interface . On this page, you can add or remo[...]

User Manual of VDR-300NU Figure 5-2-3 On this page, you can enter this PVC (VPI and VCI) value, and select DSL link type (EoA is for PPPoE, IPoE, and Bridge.), encapsulation mode and service category. Object Description VPI (Virtual Path Identifier) The virtual path between two points in an ATM netwo rk, and its valid value is from 0 to 255. VCI (V[...]

User Manual of VDR-300NU If you want to remove this Interface, pl ease select the Remove check box and click Remove .  PTM Interface Choose Adv anced Setup > Layer2 Interface > PT M Interface , and the following page appears. On this page, you can add or remove to configure PTM WA N Interfaces. Figure 5-2-4 Click Add and the followin g pag[...]

User Manual of VDR-300NU Figure 5-2-6 Click Add and the followin g page appears. Figure 5-2-7 On this page, you can select an ETH port. Click Apply/ Sa ve to save configuration. If ETH Interface is selected, there are two WAN service types (PPPoE and IPoE). 39[...]

User Manual of VDR-300NU 5.2.2 WAN Service Choose Advanced Se tup > WAN Service and the following page appears. Figure 5-2-8 On this page, you are allowed to add, remove, or edi t a WAN service. If PTM Interface is selected, there are three WA N service types: PPP over Ethernet (PPPoE) , IP over Ethernet , and Bridging . And the correspon ding c[...]

User Manual of VDR-300NU Step2 On the WAN Service page, click the Add button to display as Figure 5-2-11 sho w s . You can select ATM or PTM Interface for the WAN se rvice and then click Next . Figure 5-2-11 Step3 On this page, select the WAN service type to be PPP over Ethernet (PPPoE) . Click Next to continue the setting. Figure 5-2-12 Step4 In t[...]

User Manual of VDR-300NU Figure 5-2-13 Object Description PPP Username The correct user name provided by your ISP. PPP Password The correct password provided by your ISP. PPPoE Service Name If your ISP provides it to you, pleas e enter it. If not, do not enter any information. Authentication Method The value can be AUTO, PAP, CHAP, or MSCHAP. Usual[...]

User Manual of VDR-300NU connection. Once it detects the flow (like access to a webpage), the modem restarts the PPPoE dialup. If this function is disabled, the modem performs PPPoE dial-up all the time. The PPPoE connection does not stop, unless the m odem is powered off and DSLAM or uplink equipment is abnorma l. PPP IP extension If you want to c[...]

User Manual of VDR-300NU Step6 On this page, you can obtai n the DNS server addr esses from the selected WAN interface. Click Next to continue the setting. Figure 5-2-15 Step7 On this page, it displays the in formation about the PPPoE settings. Click Apply/Save to save and apply the settings. Figure 5-2-16 44[...]

User Manual of VDR-300NU  Adding an IP over Ethernet WAN service This section describe s the steps for add ing the IP over Ethernet WAN service. Step1 First, add a proper ATM or PTM interface for this WAN service at Layer2 Interface . Step2 On the WAN Service page, click the Add button to display as Figure 5-2-11 shows. You can select ATM or PTM[...]

User Manual of VDR-300NU If Obtain an IP address automatically is selected, DHCP will be enabled for PVC in IP over Ethernet mode. If Use the following Static IP address is selected, p lease enter the WAN IP address, subnet mask and gateway IP addre ss. Step5 On this page, you can set the network address translation settings, for example, enabling [...]

User Manual of VDR-300NU  Adding a Bridging WAN service This section describe s the steps fo r adding the Bridging WAN se rvice. Step1 First, add a proper ATM or PTM interface for this WAN service at Layer2 Interface . Step2 On the WAN Service page, click the Add button to display as Figure 5-2-11 . You can select ATM or PTM Interface for the WA[...]

User Manual of VDR-300NU  Adding a PPPoA WAN service This section describes the steps for adding the PPPoA WAN service. Step1 Choose Advanced Se tup > Layer2 Interface > ATM Interface to dsiplay the ATM Interface Configuration page. On this page, you need to add a PVC for PPPoA mode. Click the Add button on the ATM Interface Con figuration[...]

User Manual of VDR-300NU Figure 5-2-24 Step4 Select the proper interface for the WAN service an d then click Next to display the following page. Figure 5-2-25 Step5 On this page, you may modify the servic e description. Click Nex t to display the following page. You can enter the PPP username and PPP password provided by your ISP. Select the authen[...]

User Manual of VDR-300NU Figure 5-2-26 Object Description PPP Username The correct user name provided by your ISP. PPP Password The correct password provided by your ISP. Authentication Method The value can be AUTO, PAP, CHAP, or MSCHAP. Usually, you can select AUTO. Enable Fullcone NAT NAT is one where all requests from the same internal IP addre [...]

User Manual of VDR-300NU by an uplink equipment such as BAS, through PPPoA dial-up. If this function is enabled, the modem uses this IP addres s as the WAN IP address. Enable IPv6 for this service Enable this function, you can use IPv6 service. It will also need you to check Request IPv 6 Address and Request Prefix Delegation . Enable PPP Debug Mod[...]

User Manual of VDR-300NU Figure 5-2-28 Step8 On this page, it displays the in formation about the PPPoA settngs. Click App ly/ Sa ve to apply the settings. You can modify the settings by clicking the Back button if necessary. Figure 5-2-29  Adding an IPoA WAN service This section describe s the steps for adding the IPoA WAN service. 52[...]

User Manual of VDR-300NU Step1 Choose Advanced Setup > Layer2 Interface > ATM Interface to dsiplay the DSL ATM Interface Configuration page. On this page, you need to add a PVC for IPoA mode. Click the Add button. Step2 Select the DSL link type to be IPoA , and select the encap sulation mode to be LLC/SNAP-ROUTING (according to the uplink equ[...]

User Manual of VDR-300NU Step4 Select the proper interface for the WAN service and then click Next to display the following page. Figure 5-2-32 Step5 On this page, you may modify the service descr iption. Enter the WAN IP address, the WAN subnet mask, and primary DNS server provided by your ISP. Figure 5-2-33 Step6 If you do not want to enable NAT,[...]

User Manual of VDR-300NU Step7 Select a preferred WAN interface as th e system defa ult gateway and then click Next. Figure 5-2-35 Step8 On this page, you can obtain the DNS server a ddr esses from the selected WAN interface. After finishing setting, click Next. Figure 5-2-36 55[...]

User Manual of VDR-300NU Step9 On this page, it displays the informatio n about the IPoA settngs. Click Apply/Save to save and apply the settings. You can modify the settings by clicking the Back button if nece ssary. Figure 5-2-37 56[...]

User Manual of VDR-300NU 5.2.3 3G WAN Service Choose Advanced Se tup > 3G WAN Service and the following pa ge appears. Figure 5-2-38 This page is used to configure 3 G connection. If you w ant to access the Internet through 3G co nnection, a 3G network card is required. Connect the 3G net work card to the USB interface of the Router. Object Desc[...]

User Manual of VDR-300NU On this page, you are allowed to conf ig ure the settings of the 3G USB modem. Object Description Enable USB Modem If you want to access the Internet through the 3G network card, you must enable the USB modem. User Name Username provided by your 3G ISP. Password Password provided by your 3G ISP. Authentication Method Select[...]

User Manual of VDR-300NU If the 3G network card is installed, you may click the button on the Action column to establish or disconnect the 3G connect ion. When there is no DSL WAN connectio n, inse rt the 3G network card, and then system will perform dial-up automatically. If the DSL WA N connection and the 3G conne ction coexist, the DSL WAN conne[...]

User Manual of VDR-300NU 5.2.4 LAN Configuration Choose Advanced Se tup > LAN and the following page ap pears. Figure 5-2-41 On this page, you can configure a n IP address for the DSL router, enable IGMP sno oping, enable or disable the DHCP server, edit the DHCP option, conf igure the DHCP advanced setup and set the binding between a MAC addre [...]

User Manual of VDR-300NU Disable DHCP Server: If the DHCP server is disable d, you need to manually set the start IP address, end IP address and the lease time for the clients in the LAN. DHCP Server Enable DHCP Server: If you enable the DHCP sever, the clients will automatically acquire the IP address from the DHCP serve r. Edit DHCP Option60 You [...]

User Manual of VDR-300NU On this page, you can set an IP addres s for the DSL IPv6 router, enable the DHCPv6 server, enabl e RADVD and enable the MLD snoo ping function. Object Description DHCPv6 Serv er WIDE-DHCPv6 is an open-source im pl ementation of dynamic host configuration protocol for IPv6 (DHC Pv6) originally develope d by the KAME project[...]

User Manual of VDR-300NU 5.2.5 NAT  Virtual Servers Firewall can prevent unexpected traffic on the Internet from your host on the LAN. The virtual serve r can create a channel that can p ass through the firewall. In that case, the host on the Internet can communicate with a host on your LAN within certain port ran ge. Choose Advanced Setup > [...]

User Manual of VDR-300NU Object Description Use Interface Select an interface that you want to configure Select a Service Select a proper service in the drop-down list. Custom Server Enter a new service name to establi sh a user service type. Server IP Address Assign an IP address to virtual server. External Port Start When selecting a service, the[...]

User Manual of VDR-300NU On this page, you may add or remo ve an entry of port triggering. Click the Add button to display the following page. Figure 5-2-46 Object Description Use Interface Select an interface that you want to configure Select an application Select a proper application in the drop-d own list. Custom application Enter a new service [...]

User Manual of VDR-300NU After finishing se tting, click Save/Apply to apply the settings. You can use a single port numbe r, several port numbers sep arated by commas, port blocks consisting of tw o port numbers separated b y a dash, or any combinatio n of these, for example 80, 90-140, 180.  DMZ Host DMZ allows all the ports of a PC on your LA[...]

User Manual of VDR-300NU Figure 5-2-48 Click Add Fire wall and the following page appears. Figure 5-2-49 Object Description name The name of firewall. interface You can select LAN or WA N from the drop-down list. ty pe You can select IN or OUT from the drop -down list. defaultaction You can select Permit or Drop from the drop-d own list. Click Modi[...]

User Manual of VDR-300NU Choose Security > MAC Filtering and th e following page appears. Figure 5-2-50 On this page, you can add or remove the MAC filter ing rule. You may change the MAC filtering policy from FORWARDED to BLOCKE D by clicking the Change Policy button. Click the Add button to display the following page. Figure 5-2-51 68[...]

User Manual of VDR-300NU Object Description Protocol Type Select the proper protocol type. Destination MAC Address Enter the destination MAC address. Source MAC Address Enter the source MAC add ress. Frame Direction The direction of transmission frame. WAN Interface Select the proper WAN interf ace in the drop-d own list. After finishing setting, c[...]

User Manual of VDR-300NU Figure 5-2-53 After finishing setting, click Apply/Save button to save and apply the settings.  Url Filter Click Advanced Setup > Parental Control > Url Filter and the following page appears. Figure 5-2-54 This page is used to prevent the LAN users from accessi ng some Websites in the WAN. On this page, you may sel[...]

User Manual of VDR-300NU Click the Add button to display the following page. Figure 5-2-55 On this page, enter the URL address and its co rres ponding port number. Fo r example, enter the URL address http://www.google.com and the port number 80 and then click the App ly/Save button. 5.2.8 Quality of Service Choose Advance Setup > Quality of Serv[...]

User Manual of VDR-300NU  Queue Configuration Choose Advanced Se tup > Quality of Service > QoS Queue and the following page appears. On this page, you can enable, add or remove a QoS rule. Figure 5-2-57 The lower integer value for precedence indicates the highe r priority. Click the Add button to display the following page. Figure 5-2-58 [...]

User Manual of VDR-300NU After finishing se tting, click Apply/Save to save and apply the settings.  QoS Classification Choose Advanced Se tup > Quality of Service > QoS Classification and the following page appears. Figure 5-2-59 On this page, you can enable, add or remove a QoS classification rule. Click the Add button to display the fol[...]

User Manual of VDR-300NU 5.2.9 Routing  Default Gateway Choose Advanced Se tup > Routing > Default G ateway and the following page appears. Figure 5-2-61 On this page, you can modify the default gateway settings. Select a proper WAN interface in the d rop-down list of Selected WAN Interface as the system default gateway. After finishing se[...]

User Manual of VDR-300NU Figure 5-2-63 Object Description IP Version Select the IP version. IPv4 or IPv6. Destination IP address/prefix length Enter the destination IP address. Interface Select the proper interface for the rule. Gateway IP Address The next-hop IP address. Metric The metric value of routing. After finishing setting, click Apply/Save[...]

User Manual of VDR-300NU On this page, you can add or rem o ve a static policy rule. Click the Add button to display the following page. Figure 5-2-65 On this page, enter the policy name, source IP and default gateway, and select the physi cal LAN port and interface. After finishing setting, click Appl y/S ave to save and apply the settings.  RI[...]

User Manual of VDR-300NU 5.2.10 DNS  DNS Server Choose Advanced Se tup > DNS > DNS Server and the following page appe ars. Figure 5-2-67 On this page, you can select a DNS serve r interface from the available interfaces, manually ent er the DNS server addresse s, or obtain the DNS address from a WAN interface. After finishing setting, clic[...]

User Manual of VDR-300NU On this page, you are allo wed to modify the DDNS settings. Click the Add button to display the following page. Figure 5-2-69 Object Description Hostname It is the domain name and it can be modified. Interface The interface that the packets pass through on the DSL router. Username Enter the username for accessing the DDNS m[...]

User Manual of VDR-300NU Figure 5-2-70 On this page, you can set the DSL settings. Usually, yo u do not need to modify the factory default settings. After finishing setting, click Apply/Save to save and apply the settings. 5.2.12 UPnP Choose Advanced Se tup > UPnP and the following page appears. Figure 5-2-71 On this page, you can ena ble or dis[...]

User Manual of VDR-300NU 5.2.13 DNS Proxy Ch oose Advanced Setup > DNS Proxy and the following page appears. Figure 5-2-72 On this page, you can e na ble or disable the DNS proxy function. After enabling the DNS proxy function, enter the host name of the broadband router and the domain n ame of the LAN network and then click Apply/Save to save a[...]

User Manual of VDR-300NU On this page, you can en able or disable the printer se rver. After finishing setting, click Apply/Save to save and apply the settings. 1. GDI interface printers are not supported. 2. Multifunction printers are not supported. 81[...]

User Manual of VDR-300NU 5.2.15 DLNA Choose Advanced Se tup > DLNA and the followin g page appears. Figure 5-2-74 On this page, select the Enable on-board digital media serv er check box and the following page appears. On this page, enter the medi a lib rary path to run digital media server. Figure 5-2-75 5.2.16 Packet Acceleration Choose Advanc[...]

User Manual of VDR-300NU 5.2.17 Storage Service Share a USB storage device with PC/La ptop on the local network of the VDRT-300NU. Insert a USB storage device, such as a fl ash drive or ex ternal hard drive, into the USB port on the right side or rear side of the VDR-300NU. The VDR-300NU can a utomatically identify attached storage and load its roo[...]

User Manual of VDR-300NU Figure 5-2-78 Operation Instructions: Step 1. Create an account. 1). Click “ Add ” to display a dialog ue box below: 2) Enter a user name and a password, which will be used by clients when accessing the USB storage device for sharing files thereon. 84[...]

User Manual of VDR-300NU 3) Re-type to confirm password and then click the “ Appl y/Sa ve ” b utton. Step 2. Access shared file To access resou rces on such storage devi ce, double click “ Computer ” on your PC and ente r 192.168.1.1 (The LAN IP address of the router). 85[...]

User Manual of VDR-300NU At the User Name and Password pr ompt, type y our proper user name and password to login. The filename only supports Unicode . 86[...]

User Manual of VDR-300NU 5.2.18 Interface Grouping Choose Advanced Se tup > Interface Grouping and the following page a ppears. Figure 5-2-79 Interface grouping supports multiple po rts to PVC and bridging groups. Each group will perform as an independent network. To suppo rt this feature, you mu st create mapping groups wi th the app ropriate L[...]

User Manual of VDR-300NU Figure 5-2-80 On this page, please follow the on-screen configuratio n steps to configure the parameters of the interface grouping. After finishing setting, click Appl y/Sa ve to save and apply the settings. 5.2.19 IP Tunnel  IPv6 in IPv4 Choose Advanced Setup > IP Tunnel > IPv 6inIPv4 and the following page appear[...]

User Manual of VDR-300NU Figure 5-2-82  IPv4 in IPv6 Choose Advanced Se tup > IP Tunnel > IPv4inIPv6 and the following page a ppears. Figure 5-2-83 Click Add and the followin g page appears. On this page, you can add a ne w tunnel of IPv4 in IPv6. Figure 5-2-84 89[...]

User Manual of VDR-300NU 5.2.20 IPSec Choose Advanced Setup > IPSec and the following page appears. Figure 5-2-85 On this page, you can add or rem ove the IPSec tunnel connections. Click the Add button to display the following page. Figure 5-2-86 On this page, set the parameters su ch as the I PSec connection name, tunnel mode, and remote IPSec [...]

User Manual of VDR-300NU 5.2.21 Certificate  Local Choose Advanced Se tup > Certificate > local and the following page appears. Figure 5-2-87 On this page, you can acqui re the loca l certificate by creating a certificat e request or importing a certificate. You may also create or remove a certificate.  Creating a New Certificate Requ e[...]

User Manual of VDR-300NU www.mydomain.com). Browsers use this information to identify your Web site. Some browsers will refuse to establish a secure connection with your site if the server name does not match the co mmon name in the certificate. Please do not include the protocol symbol "http://" or any port numbers or pathnames in the co[...]

User Manual of VDR-300NU The certificate request ne eds to be submitted to a ce rtificate authority, which will sign the request. Then the signed certificate needs to be loade d to the DSL router. Click Load Signed Certificate on this page and the following page appears. Figure 5-2-90 On this page, paste the sig ned certificate and then click the A[...]

User Manual of VDR-300NU  Trusted CA Choose Advanced Se tup > Certificate > Trusted CA and the following page appears. Figure 5-2-92 On this page, you may import or re move a CA certificate . Click the Import Certificate button to display the following page. Figure 5-2-93 On this page, enter the certificate name and paste the certificate c[...]

User Manual of VDR-300NU 5.2.22 Power Management Choose Advanced Se tup > Power Management and the following page appe ars. This page allows control of Hardware modul es to evaluate power consu mpt ion. Use the control buttons to select the desired option. Figure 5-2-94 After proper configurations, click Apply t o take the configurations effect.[...]

User Manual of VDR-300NU 5.2.23 Multicast Choose Advanced Setup > Multicast and the following page appears. Figure 5-2-95 On this page, you can configure th e multicas t parameters. After finishing setting, click Apply/Sav e to save and apply the settings. 96[...]

User Manual of VDR-300NU 5.3 Wireless Choose Wireless and the submenus of Wireless a re shown below: Figure 5-3-1 5.3.1 Basic Settings Choose Wireless > Basic to display the following page. On this page, the figure in the right area is 2-dimensional code. It includes the wirel e ss SSID and password. You can obtain the wireless SSID and password[...]

User Manual of VDR-300NU scanning. Clients Isolation When many clients connect to the same acce ss point, they can access each other. If you want to disable t he access between the clients that connect to the same access point, you can select this option. Disable WMM Advertise After enabling this option, the transmission performa nce multimedia of [...]

User Manual of VDR-300NU 5.3.2 Security Choose Wireless > Secur ity to display the following page. Figure 5-3-3 This page allows you to configure the se curity featur es of the wireless LAN interface. On this page, you can configure the network se curity settings by the Wi-Fi Protected Setup ( WPS ) method or setting the network authentication m[...]

User Manual of VDR-300NU  WPS Setup Figure 5-3-4 There are 2 primary methods used in the Wi-Fi Protected Setup:  PIN entry, a mandatory method of setu p for all WPS certified devices. Enter STA PIN: If you select it, you need to enter the station PIN from client. Use AP PIN: The PIN is generated by AP.  Push button configuration (PBC), an [...]

User Manual of VDR-300NU Figure 5-3-5  Open Mode Figure 5-3-6 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Select the Open mode. 101[...]

User Manual of VDR-300NU Authentication WEP Encryption Enable or disable WEP encryption. After enabling this function, you can set the encryption strength, cu rrent network key, and net work keys. Encryption Strength You can set 64-bit or 128-bit key. Current Netw ork Key The current key that you use. Network Key1/2/3/4 Set the network key. If it i[...]

User Manual of VDR-300NU Figure 5-3-8 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the 802.1X in the drop-down list. RADIUS Server IP Address Enter the IP address of the RADIUS server. RADI US server is used to authenticate the hosts on the wirele ss network. RADIUS Port The port[...]

User Manual of VDR-300NU  WPA Mode Figure 5-3-9 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the WPA mode. WPA Group Rekey Interval Setting the interval for renewing key. RADIUS Server IP Address Enter the IP address of the RADIUS server. RADI US server is used to authenticate[...]

User Manual of VDR-300NU  WPA-PSK Mode Figure 5-3-10 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the WPA-PSK mode. WPA/WAPI passphrase The key for WPA encryption. Click t he Click here to displ ay button to display the current key. The default key is 87654321. WPA Group Rekey[...]

User Manual of VDR-300NU  WPA2 Mode Figure 5-3-11 Object Description Select SSID Select a SSID for configuring the securi ty settings. Network Authentication Select the WPA2 mode. WPA2 Preauthentication Enable or disable pre-authentication. Network Re-auth Interval Set the network re-auth interval. WPA Group Rekey Interval Setting the interval f[...]

User Manual of VDR-300NU  WPA2-PSK Figure 5-3-12 For the parameters’ desc ription of WPA2-PSK mode, please refer to the WPA-PSK mode .  Mixed WPA2/WPA Figure 5-3-13 For the parameters’ description of Mixed WPA2/WPA mode, please refer to the WPA2 mode . 107[...]

User Manual of VDR-300NU  Mixed WPA2/WPA-PSK Figure 5-3-14 For the parameters’ descript ion of Mixed WPA2/WPA-PSK mode, please refer to the WPA-P SK mode. 5.3.3 MAC Filter Choose Wireless > M AC Filter to display the following pag e. Figure 5-3-15 This page is used to allow or rej ect the wireless cl ients to access the wireless n etwork of[...]

User Manual of VDR-300NU Object Description Disabled Disable the wireless MAC addr ess filtering function. Allow Allow the wireless clients with t he MAC addre sses in the MAC Address list to access the wireless ne twork of the wireless router. Deny Reject the wireless clients with the MAC addres ses in the MAC Address list to access the wirel ess [...]

User Manual of VDR-300NU This page allows you to configure the wireless br idge feature s of the wireless LAN interface. Object Description AP mode You may select Access Point or Wireless Bridge. Bridge Restrict Enable or disable the bridge restrict fun ction. Remote Bridges MAC Address Enter the remote bridge MAC add ress. After finishing setting,[...]

User Manual of VDR-300NU Channel Fill in the appropriate channel to correspond with your network setti ngs. All devices in your wireless netwo rk must use the same cha nnel in order to work correctly. This route r supports auto channeling functionality. Auto Channel Timer(min) Specifies the timer of auto channeling. 802.11n/EWC Select disable 802.1[...]

User Manual of VDR-300NU and a wireless client. The default value is Auto . Basic Rate Select the basic transmission rate ability for the AP. Fragmentation Threshold Packets that are larger than this thresho ld are fragmented into multiple packets. Try to increase the fragmentation threshol d if you encounter high packet error rates. Do not set t h[...]

User Manual of VDR-300NU make it has very low power consumptio n. WMM Power Save is an improvement to the 802.11e amendment adding advanced power management functionality to WMM. Click Appl y/ Sa ve to configure the advanced wireless options and make the cha nges take effect. The advanced wireless setting is only for the advan ced user. For the com[...]

User Manual of VDR-300NU 5.4 Diagnostics 5.4.1 Diagnostics Click Diagnostics > Diagnostic s , and the following page appears. This page is used to test th e connection to your local network, the connection to yo ur DSL service provider, and the connection to your In ternet service provider. You may diagnose the connection by cli cking the T est [...]

User Manual of VDR-300NU Click Diagnostics > Fault Manag ement and the following page ap pears. Figure 5-4-2 115[...]

User Manual of VDR-300NU 5.5 Management Choose Management and the submenus of Management are shown below: Figure 5-5-1 5.5.1 Settings  Backup Choose Managemen t > Settings > Backup to display the followi ng page. Figure 5-5-2 On this page, click the Backup Settings button to save your router’s settings to your local PC.  Update Choose[...]

User Manual of VDR-300NU  Restore Default Choose Managemen t > Settings > Restore Default to display the following page. Figure 5-5-4 On this page, click the Restore default settings button, and then system returns to the default settings. 5.5.2 System Log Choose Managemen t > System Log to display the following page. Figure 5-5-5 On th[...]

User Manual of VDR-300NU Figure 5-5-6 On this page, you can set 3 types of system log modes, including Local, Remote, and Both. Object Description Local When selecting Lo cal, the events are recorded in the local memory. Remote When selecting Rem ote, the events are sent to the specified IP address and UDP port of the remote sy stem log server. Bot[...]

User Manual of VDR-300NU On this page, you can view the system log. Click the Refresh button to refresh the system log. Click the Close button to exit. 5.5.3 SNMP Agent Choose Management > SNMP A gent ,and the following page appears. Figure 5-5-8 Simple Network Manageme nt Protocol (SNMP) allows a manageme nt application to retrieve statistics a[...]

User Manual of VDR-300NU 5.5.4 TR-69 Client Choose Management > TR-069Clie nt to display the following page. Figure 5-5-9 WAN Management Protocol (TR-069) al lows an Auto-Configurati on Server ( ACS ) to perform auto-configuration, provisi on, collection, and diag nostics to this device. On this page, you may configure the parameters such a s th[...]

User Manual of VDR-300NU 5.5.5 Internet Time Choose Management > Internet Time to display the following page. Figure 5-5-10 On this page, you may configure the rou ter to sync hronize its time with the Internet time servers. After enabling Automatically synchronize w ith Internet time servers , the following page appears. Figure 5-5-11 On this p[...]

User Manual of VDR-300NU Figure 5-5-12 On the page, you can modify the username and pa ssword of different users. After finishing setting, click the Apply/Sav e button to save and apply the settings.  Services Choose Managemen t > Access Control > Services Con trol and the following page appears. Figure 5-5-13 122[...]

User Manual of VDR-300NU On this page, you can ena ble or disable the different types of services. After finishing setting, click the Apply/Sav e button to save and apply the settings. 5.5.7 Update Software Choose Managemen t > Update Software and the following page appears. Figure 5-5-14 If you want to upload the software, click the Browse… b[...]

User Manual of VDR-300NU Appendix A: Planet DDNS First of all, please go to http:// www.planetddns.com to register a Planet DDNS acco unt, and refer to the FAQ ( http://www.planetddns.co m/index.php/faq ) for how to register a free account. To select DNS > Dy namic DDNS Step 1. Press Add button Step 2. Select Planet DDNS 124[...]

User Manual of VDR-300NU Step 3. Type the User Name for your DDNS account. Step 4. Type the Password for your DDNS account. Apply the settings and ensure you have conne cted the WAN port to the Internet. In a remote device, enter the Domain Name to the intern et browser’s address bar. You can go to My Devices page of Planet DDNS website to c heck[...]

User Manual of VDR-300NU Appendix B: Performance of VDSL Router Profiles The table below is a performance table for profile and line dista nce; this data is just for reference. The actual data rate will vary on the quality of the telephone line and environmental factors. For better performance, we suggest you use the AW G-26 or above cable for your[...]

User Manual of VDR-300NU Appendix C: Glossary Address mask A bit mask select bits from an Internet address for subnet addre ssing. The mask is 32 bits long and selects the network portion of the Internet address and one or more bits of the local portion. Sometimes it called subne t mask. VDSL VDSL2 (Very High-Bit-Rate Digital Subscriber Line 2), G.[...]

User Manual of VDR-300NU CO Central Office. Refers to equipment locat ed at a Telco or service provider's office. CPE Customer Premises Equipment locate d in a user's premises DHCP (Dynamic Host Configuration Protocol) DHCP is software that automatica lly assigns IP addresses to client stations log ging onto a TCP/IP network. DHCP elimina[...]

User Manual of VDR-300NU FTP File Transfer Protocol. The Internet protocol (and program) transfer files betwee n hosts. Hop count A measure of distance b etween two points on the Int er net. It is equivalent to the number of gateways that separate the source and destination. HTML Hypertext Markup Languag e - The page-coding langu age for the World [...]

User Manual of VDR-300NU MAC Media Access Control Layer - A su b-layer of the Da ta Link Layer (Layer 2) of the ISO OSI Model responsible for media co ntrol. MIB Management Information Base - A collection of object s can be accessed via a network management protocol, such as SNMP and CMIP (Common Manag ement Information Protocol). NAT Network Addre[...]

User Manual of VDR-300NU RFC Request for Comm ents - Refers to documents publi she d by the Internet Engineering Task F orce (IETF) proposing standard protocols an d procedures for the Internet. RFC can be found at www.ietf.org . Route The path that network traffic takes from its source to its destination. The route a datagram may follow can includ[...]

User Manual of VDR-300NU Static IP Address A static IP address is an IP addre ss permanently assi gned to computer in a TCP/IP network. Static IP addresses are usually assi gned to netwo rked devices that are consistently accessed by multiple users, such as Server PCs, or printers. If you are usi ng your Router to share your cable or DSL Internet c[...]

User Manual of VDR-300NU WAN Wide area n etwork - A data comm unications network that spans any distance a nd is usually provided by a public carrier (such as a telepho ne company or service provider). 133[...]