Planet WNAP-W2200 Bedienungsanleitung

User ’ s Manual www.PLANET.com.tw 300Mbps In-W all PoE Wireless Access Point WNAP-W2200[...]

Copyright Copyright  2013 by PLANET T echnology Corp. All right s rese rved. No part of this publicatio n may be reproduced, transmitted, transcri bed, st ored in a retrieval system, or translated into any language or computer language, in any form or by any means, electro nic, mechanical, magnetic, optical, chemical, manual or otherwise, withou[...]

Federal Communication Commission (FCC) Radiation Exposure Statement This equipment complies with FCC rad iation expos ure set forth for an uncontrolled enviro nment. In order to avoid the possibility of exceeding the FCC radio freque ncy exposure limit s, human proximity to the antenna shall not be less than 20 cm (8 in ches) during normal operatio[...]

Revision User Manual for PLANET 300Mbps In- wall PoE Wireless Access Point Model: WNAP-W2200 Rev: 1.0 (June, 2013) Part No. EM-WNAP-W2200_v1.0 ( 2081-E1 0540-000 ) III[...]

CONTENTS Chapter 1. Product Introduction ........................................................................................................... 1 1.1 Package Content s ............................................................................................................... 1 1.2 Product Description .......................................[...]

Chapter 6. Quick Connection to a Wireless Network ....................................................................... 37 6.1 Windows XP (Wireless Zero Configuration) ................................................................... 37 6.2 Windows 7 (WLAN AutoConfig) .............................................................................[...]

FIGURE F IGURE 2-1 WNAP-W2200 P RODUCT O UTLOOK ................................................................................................... 6 F IGURE 2-2 WNAP-W2200 P ANEL L AY O U T ........................................................................................................... 7 F IGURE 3-1 WNAP-W2200 I NST ALLA T ION D IAGRAM [...]

VII F IGURE 6-15 S YSTEM P REFERENCES -- N ETWORK ................................................................................................ 44 F IGURE 6-16 S ELECT THE W IRELESS N ETWO RK ................................................................................................... 45 F IGURE 6-17 I P HONE – S ETTINGS ICON ...........[...]

User Manual of WNAP-W2200 -1- Chapter 1. Product Introduction 1.1 Package Content s Thank you for choosing PLANET WNAP-W2200. Before inst alling the AP , please verify the content s inside the package box. WNAP-W22 00 CD-ROM Screw x 2 (User Manual includ ed) Quick Inst allation Guide If there is any item missing or damage d, please contact the sell[...]

User Manual of WNAP-W22 00 -2- 1.2 Product Description W all Outlet to Wireless Solution The WNAP-W2200 is an in-wall Wi-Fi Access Point which is specially designed for existing building structure, without affect ing the appearance of the interior de sign, which can provide users with convenient wireless local-area network (WLAN). The standard 86x8[...]

User Manual of WNAP-W2200 -3- Adapted to live In-W all Design Featuring attractive appearance and In-W all design, t he WNAP-W2200 ca n be firmly install ed into the wall via the standa rd 86x86mm European o utlet box, which is easy and convenie nt in room inst allation. It s pure and simple body without protruding antennas also gives no ef fects t[...]

User Manual of WNAP-W2200 -4- 1.3 Product Features  St andard Compliant Hardware Interface  Complies with IEEE 802.1 1n Wireless LAN speed up to 300Mbps  2 x 10/100Base-TX Ports with 1-p ort PoE (PD, Powered Device)  2T2R MIMO technology for enhance d throughput and coverage  USB 2.0 charger port for easy chargi ng to most of mobile [...]

User Manual of WNAP-W2200 -5- 1.4 Product S pecifications Product WNAP-W2200 300Mbps 802.1 1n Wireless In-wall Access Point Hardware Specification PoE Port: 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port (Rear Panel) IEEE 802.3af PD Port ※ LAN Port: 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port (Front Panel) Interface USB Port : USB 2.0, T ype-A, 5V DC/0.5A O[...]

User Manual of WNAP-W2200 -6- Chapter 2. Hardware Installation Please follow the instructions below to connect WNAP-W2200 to the existing net work devices and your c omputers. 2.1 Product Outlook  Dimensions : 86 x 86 x 3 6 mm (L x W x H)  Diagram : Front Vie w Rear Vie w Side Vie w Bottom Vie w Figure 2-1 WNAP-W2200 Product Outlook[...]

User Manual of WNAP-W2200 -7- 2.1.1 Panel Layout The front and rear p anel provide a simpl e interface monitoring the AP . Figure 2-2 sh ows the hardware interface of WNAP-W2200. Hardware Interface Figure 2-2 WNAP-W2200 Panel Layout 2.1.2 Hardware Description LED definition Object Description On Power on Flashing The system is on and works p roperl[...]

User Manual of WNAP-W2200 -8- Port definition Object Description PoE Port (802.3af PoE) 10/100Mbps RJ-45 port , Auto MDI/ MDI-X Connect LAN port to the PoE injector to power on the device. LAN Port 10/100Mbps RJ-45 port , Auto MDI/ MDI-X Connect this port to the network equipm ent. USB Port USB 2.0, T ype-A, 5V DC/0.5A Output Connect this port to c[...]

User Manual of WNAP-W2200 -9- Chapter 3. Connecting to the AP 3.1 System Requirement s  Broadband Internet Access Service (Cable/xDSL/Ethernet conne ction)  One PoE Switch (supply power to the WNAP -W2200)  PCs with a working Ethernet Adapter and an Ethernet cable with RJ-45 connect ors  PC of subscribers runnin g Windows 98/ME, NT4. 0,[...]

User Manual of WNAP-W22 00 -10- Step 2. Follow the figure below to connect the network devi ces. ※ Y ou can charge the mobile equip ment through the USB cha rge port while surfing the Internet. LAN USB Charger RST PWR Wireless Connection PC 2 USB Charging Smartphone/P ad PC 1 Ethernet Cable (Data) WNAP-W2200[...]

User Manual of WNAP-W2200 -1 1- Chapter 4. Quick Installation Guide This chapter will show you how to configure the basic functio ns of your AP within minutes. A computer with wired Ethernet connection to the Wireless AP is required for the first-time configuration. 4.1 Manual Network Setup - TCP/IP Configuration The default IP address of the WNAP-[...]

User Manual of WNAP-W2200 -12- Figure 4-1 TCP/IP Setting Now click OK to save your settings. Now , you can run the Ping comma nd in the command prompt to verify the network connection bet ween your PC and the AP . The following example is in Windows 7 OS. Please follow the step s below: 1. Click on Start > R u n . 2. T ype “ cmd ” in the Sea[...]

User Manual of WNAP-W2200 -13- Figure 4-2 Windows S tart Menu 3. Open a command prompt , and type ping 192.168.1.253 , and then press Enter . If the result displayed is similar to Figure 4-3 , it means the conne ction between your PC and the AP has been est ablished well. Figure 4-3 Successful result of Ping command If the result displayed is simil[...]

User Manual of WNAP-W2200 -14- Figure 4-4 Failed result of Ping command If the address is 0.0.0.0, check your adapter inst allation, security setting s, and the settings o n your AP . Some firewall software p rograms may block a DHCP request on newly installed ada pters.[...]

User Manual of WNAP-W2200 -15- 4.2 S t arting Setup in the W eb UI It is easy to configure and manage the AP with the web browser . Step 1. T o access the configuration utility , open a web-browser and enter the default IP address http://192.168.1.253 in the web address field of the browser . Figure 4-5 Login by default IP address After a mome nt, [...]

User Manual of WNAP-W2200 -16- Chapter 5. Configuring the AP This chapter delivers a de tailed pres ent ation of AP’s functionalities and features under 7 m ain menus below , allowing you to manage the AP with ease. Figure 5-1 Main Menu During operation, if you are not clea r about a cert ain feature, you can simply click the “Hel p” button t[...]

User Manual of WNAP-W2200 -17- Figure 5-2 LAN S tatus This section allows you to view the AP’s LAN info listed belo w: Object Description  MAC Address: Displays AP’s LAN MAC address.  IP Addres s: Displays LAN IP address.  Subnet Mask: Displays LAN subnet mask.  Wireless This section allows you to view the wireless info listed below[...]

User Manual of WNAP-W2200 -18- Figure 5-3 Wireless information The page incl udes the following fields: Object Description  Wireless S t atus: Displays whether wirele ss is enabled or not.  SSID: Displays current SSID .  MAC addr ess: Displays MAC address of the AP’s wireless interfa ce  Network Mode: Displays currently active network[...]

User Manual of WNAP-W2200 -19- Figure 5-4 General System information The page incl udes the following fields: Object Description  Product Model: Displays the Product Model  Up Tim e: Displays uptime.  Firmware V ersion: Displays AP’s firmware version.  Hardware V ersion: Displays AP’s hardware version.[...]

User Manual of WNAP-W2200 -20- 5.2 Basic “ Basic ” setting p age includes the LAN setting. 5.2.1 LAN Settings On the LAN Settings page , you can configure the IP pa rameters of the LAN on the scre en as shown below . Figure 5-5 LAN settings The page incl udes the following fields: Object Description  MAC addr ess: Displays MAC address of the[...]

User Manual of WNAP-W2200 -21- 1. If you change the IP Address of LAN, you must use the new IP Address to login the AP . 2. Whe n the IP address of the WNAP -W2200 is cha nged, the client s on the network ofte n need to wait for a while or even reboot before they can access the new IP address. For an immediate access to the AP , please flush the ne[...]

User Manual of WNAP-W2200 -22- The page incl udes the following fields: Object Description  Wireless Enable: Click “Enable” to enable the wireless si gnal.  Broadcast(SSID): When you select “Disable SSID broadca st”, AP will not broadcast it s own SSID. If there is a wireless connec tion request, you need to input SSID manually .  [...]

User Manual of WNAP-W2200 -23- 5.3.2 Security Y ou can configure the secu rity settings for the wireless network on this page. Figure 5-7 Wireless Security Settings There are following encryption types in AP-Security Mode. Object Description Disable The wireless security functi on can be enabled or disabled. If disabled, the wi reless st ations wil[...]

User Manual of WNAP-W2200 -24- Open Mode It allows any device to join the network without performing any security check. Shared Mode Data encryption and key are requi red for wireless authentication. WEP Mixed Mode WEP (Wi red Equivalent Privacy), a basic encryption method, usually encrypt s wireless dat a using a series of digital keys (64 bits or[...]

User Manual of WNAP-W2200 -25- 5.3.3 Wireless Access Control Choose menu “ WLAN Settings  Wireless Acces s Control ”, you can choose to allow or deny the comput er of specified MAC address to wirel essly connect with th e WNAP-W2200 on thi s page. Af ter configuration is done, please click the “Apply” bu tton to save the settings. Figure[...]

User Manual of WNAP-W2200 -26- Step 2. Enter 00:30:4f:1 1:22:33 in the MAC address box and click “ Add ”. Step 3. Click the “ Sav e ” button to save your settings and you can add more MAC addresses, if you like, simply repeat the above step s.[...]

User Manual of WNAP-W2200 -27- 5.4 SNMP Setting Simple Network Management Protocol (SNMP ) is a popular protocol for netwo rk management. It is widely used in local area netwo rks (LAN) for collecting info rmation, and managing and monito ring network devices, such as servers, printers, hubs, switch es, and routers from a management host. Managed d[...]

User Manual of WNAP-W2200 -28- The page incl udes the following fields: Object Description  System Cont act: Set the name to access the AP . Usually set the administrator ’s name.  System Name: Set the AP’s name, such as “ WNAP-W2 200 ”.  System Location: Set the AP’s network locati on.  Read Community: Indicates the community[...]

User Manual of WNAP-W2200 -29- The page incl udes the following fields: Object Description  SSID: Display the current SSID.  MAC Restrict Mode: Y ou can choose to set the Allow , Deny or disable this function.  MAC Address: Enter the MAC address you want to allow or deny to conn ect to the WNAP-W2200 in the field. Then, c lick “Add” to[...]

User Manual of WNAP-W2200 -30- 1. Click " Choose file ” to locate the firmware and " Up date ” to upgrade. 2. AP will reboot automatically when upg rade completes. Do not disconnect the device from y our management PC (the PC you use to configure the device) o r power of f it during the upgrade process; otherwi se, it may be permanent[...]

User Manual of WNAP-W2200 -31- Figure 5-13 System Log  Refresh: Click this button t o update the log.  Clear: Click this button to clear the current log. 5.6.4 Time & Date This section assist s you in setting the Wireless AP’ s syst em time. Y ou can either select to set the time and date manually or automatically obtain the GM T time f[...]

User Manual of WNAP-W2200 -32- Figure 5-14 T ime & Date Setting The page incl udes the following fields: Object Description  Sync with Internet Time Serv ers: Select it to update the system time by synchronizi ng with a public time server over the Internet.  Sync Interval: Configure the interval of synchronizing time.  Time Zone Select[...]

User Manual of WNAP-W2200 -33- Once you have configured the Wireless AP the way you want it, you can save these settings to a configuration file on your local hard drive that can l ater be imported to your Wireless AP in case the device is restored to factory default settings. Figure 5-15 Configuration Management The page incl udes the following fi[...]

User Manual of WNAP-W2200 -34- Figure 5-16 Restore to Factory Default  Restore : Click this button to restore to default settings.  Factory Default Setting s: User name: admin Password: admin IP Addres s: 192.168.1.253 Subnet Mask: 255.255.255.0 SSID: WNAP-W2200_XXXXXX ("X" means the l ast 6 digit s of the MAC address) Wireless Encr[...]

User Manual of WNAP-W2200 -35- Figure 5-17 Setting Login Password The page incl udes the following fields: Object Description  Old User Name: Enter the old user name.  Old Password: Enter the old password.  New User Name: Enter the new user name.  Ne w P a s s wo r d : Enter the new password.  Confirm New Password: Confirm the new pa[...]

User Manual of WNAP-W2200 -36- Figure 5-18 Login T ime Out Settings T o modify the default Login T ime Out value, please en ter the value within the range of 30~3600 seconds. 5.6.9 Exit T o logout the WNAP-W2200, please select “Exit” from the left-sid e menu.[...]

User Manual of WNAP-W2200 -37- Chapter 6. Quick Connection to a Wireless Network In the following sections, the default SSID of the WNAP-W2200 is configured to “ default ”. 6.1 Windows XP (Wireless Zero Configuration) Ste p 1 : Right-Click on the wireless network icon displayed in the system tray Figure 6-1 System T ray – Wireless Network Ico[...]

User Manual of WNAP-W2200 -38- Ste p 4 : Enter the encryption key of the Wireless AP (1) The Wireless Network Connection box will appear (2) Enter the encryption key that configured in section 5.3.2 (3) Click the [Connect] button Figure 6-3 Enter the network key Ste p 5 : Check if “ Connected ” is displayed Figure 6-4 Choose a wireless network [...]

User Manual of WNAP-W2200 -39- Some laptops are e quipped with an “Wirele ss ON/OFF” switch for the internal wirel ess LAN. Make sure the hardware wireless switch is switch to “ON” position. 6.2 Windows 7 (WLAN AutoConfig) WLAN AutoConfig service is built-in in Windows 7 that can b e used to detect and conne ct to wireless network. This bui[...]

User Manual of WNAP-W2200 -40- If you will be connecting to this Wi reless AP in the future, check [ Connect automatically ]. Ste p 4 : Enter the encryption key of the Wireless AP (1) The Connect to a Network box will appear (2) Enter the encryption key that configured in section 5.3.2 (3) Click the [OK] button Figure 6-7 T ype the network key Figu[...]

User Manual of WNAP-W2200 -41- Figure 6-9 Connected to a Network[...]

User Manual of WNAP-W2200 -42- 6.3 Mac OS X 10.x .3 Mac OS X 10.x In the following sections, the default SSID of the WNAP-W2 200 is configured to “default”. In the following sections, the default SSID of the WNAP-W2 200 is configured to “default”. Ste p 1 : Right-Click on the network icon displayed in the system tray The AirPort Network C o[...]

User Manual of WNAP-W2200 -43- Figure 6-12 Enter the Password If you connect this Wireless AP in the future, ch eck [ Remember this network ]. Ste p 5 : Check if the AirPort is connected to the selected wireless network. If “Y es”, then there will be a “check” symbol in the front of the SSID. Figure 6-13 Connected to the Network[...]

User Manual of WNAP-W2200 -44- There is another way to configure the MAC OS X Wireless settings: Ste p 1 : Click and open the [ Sy stem Preferences ] by going to Apple > Sy stem Preference or Applications Figure 6-14 System Preferences Ste p 2 : Open Network Preference by clicki ng on the [ Network ] icon Figure 6-15 System Preferences -- Net wo[...]

User Manual of WNAP-W2200 -45- Ste p 3 : Check Wi-Fi setting and select the available wireless network (1) Choose the AirPort on the left-menu (m ake sure it is ON) (2) Select Network Name [ default ] here If this is the first time to connect to the Wire less AP , it should show “Not network selected”. Figure 6-16 Select the Wi reless Networ k[...]

User Manual of WNAP-W2200 -46- 6.4 iPhone / iPod T ouch / iPad .4 iPhone / iPod T ouch / iPad In the following sections, the default SSID of the WNAP-W2200 is configured to “ default ”. In the following sections, the default SSID of the WNAP-W2200 is configured to “ default ”. Ste p 1 : T ap the [ Settings ] icon displayed in the home scree[...]

User Manual of WNAP-W2200 -47- Figure 6-19 Wi-Fi setting – Not Connected Ste p 3 : T ap the target wireless network (SSID) in “ Choose a Net work… ” (1) Turn on Wi-Fi by tapping “ Wi-Fi ” (2) Selec t SSID [ default ] Figure 6-20 T urn on Wi-Fi Ste p 4 : Enter the encryption key of the Wireless AP (1) The password input screen will be di[...]

User Manual of WNAP-W2200 -48- Figure 6-21 iPhone -- Enter the Password Ste p 5 : Check if the device is connected to the select ed wireless network. If “Y es”, then there will be a “check” symbol in the front of the SSID. Figure 6-22 iPhone -- Connected to the Network[...]

User Manual of WNAP-W2200 -49- Appendix A: Planet Smart Discovery Utility T o easily list the WNAP-W2200 in your Ethernet environment, the Planet Smar t Discovery Utility from user ’s manual CD-ROM is an ideal solution. The following installation instru ctions guide you to running the Planet Smart Discovery Utility . Ste p 1 : Deposit the Planet [...]

User Manual of WNAP-W2200 -50- Appendix B: Troubleshooting If you found the AP is working improperly or stop respondin g to you, please read this troubleshooting first before contactin g the dealer for help,. Some problems can be solved by yourself within a very short time. Scenario Solution The AP is no t responding to me when I want to access it [...]

User Manual of WNAP-W2200 -51- use IP address to communicate with a remote server , but can’t use host name, please check DNS setting. I can’t locate my AP by my wireless device. a. ‘Broadcast ESSID’ set to off? b. All two antennas are properly se cured. c. Are you too far from your AP? T ry to get closer . d. Please remember that you have [...]

User Manual of WNAP-W2200 -52- Appendix C: Specifications Product WNAP-W2200 300Mbps 802.1 1n Wireless In-wall Access Point Hardware Specification PoE Port: 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port (Rear Panel) IEEE 802.3af PD Port ※ LAN Port: 1 x 10/100Mbps Auto MDI/MDI-X RJ45 port (Front Panel) Interface USB Port : USB 2.0, T ype-A, 5V DC/0.5A O[...]

User Manual of WNAP-W2200 -53- Appendix D: Glossary  802.11n - 802.11n builds upon previous 802.11 standar ds by adding MIMO (multiple-input multiple-output). MIMO uses multiple transmi tter and receiver antennas to allow for increased data throughput via spatial multiplexing and increas ed range by exploiting the spatial diversity, perhaps thro[...]

User Manual of WNAP-W2200 -54-  SSID - A S ervice S et Id entification is a thirty-two character (maximum) alphanumeric key identifying a wireless local area net work. For the wireless devices in a network t o communicate with each other, all devices must be configured with the same SSID. Th is is typically the configuration paramet er for a wir[...]

User Manual of WNAP-W2200 -55- EC Declaration of Conformity English Hereby , PLANET T echnolog y Corporation, declares that this 802.1 1n Wireless AP is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Lietuviškai Šiuo PLANET T echnology Corporation, , skelbia, kad 802.1 1n Wir eless A P tenkina [...]