Poulan Pro 177110 Bedienungsanleitung

OWNER'S MANUAL For Parts and Service, contact our authorized distributor: call 1-800-849-1297 For T echnical Assistance: call 1-800-829-5886 MODEL NO . 271470 13.5 HP 38 INCH LA WN TRA CT OR 177110 Rev . 1 01.30.01 RH PRINTED IN U .S.A. • Assembly • Operation • Maintenance • Service and Adjustments • T roubleshooting • Repair Parts[...]

2 T ABLE OF CONTENTS SAFETY RULES Safety Rules ......................................... 2 Product Specifications .......................... 5 Assembly .............................................. 7 Operation ............................................ 1 0 Maintenance Schedule ...................... 1 6 Maintenance ..............................[...]

3 SAFETY RULES III. CHILDREN T ragic accidents can occur if the oper ator is not alert to the presence of children. Children are often attracted to the machine and the mowing activity . Nev er assume that children will remain where you last saw them. • Keep children out of the mowing area and under the watchful care of another responsible adult. [...]

4 SAFETY RULES Look for this symbol to point out important safety precautions. It means CA UTION!!! BECOME ALERT!!! Y OUR SAFETY IS INV OL VED . CA UTION: In order to prev ent accidental starting when setting up, transporting, adjusting or making repairs, always disconnect spark plug wire and place wire where it cannot contact spark plug. CA UTION:[...]

5 PRODUCT SPECIFICA TIONS GASOLINE 1.25 GALLONS CAP ACITY UNLEADED AND TYPE: REGULAR OIL TYPE SAE 30(ABOVE 32 ° F) (API-SF/SJ): SAE 5W-30 (Below 32 ° F) OIL CAP ACITY : 3 PTS SP ARK PLUG: CHAMPION (GAP: .030 ” ) RJ19LM V A L VE INT AKE: .005 ” -.007 ” CLEARANCE: EXHA UST:.009 ” -.011 ” GROUND SPEED FOR WARD: (MPH): 1ST 1.1 2ND 2. 2 3RD [...]

6 UNASSEMBLED P AR TS Steering Wheel (1) Washer 17/32 x 1-3/16 x 12 Gauge Steering Wheel Insert Seat (1) Large Flat Washer (1) Locknut 5/16-18 (1) Hex Bolt 5/16-18 x 1-1/4 (1) Hex Bolt 3/8-16 x 1 (1) Lockwasher 3/8 Steering Boot Steering Extension Shaft Steering Wheel Adapter (2) Keys Slope Sheet Keys (1)Knob 43 TRACTOR -- MODEL NUMBER 271470 LIFT [...]

7 Y our new tractor has been assemb led at the factory with exception of those parts left unassembled f or shipping pur poses . T o ensure saf e and proper operation of your tractor all parts and hardware you assemb le must be tightened securely . Use the correct tools as necessary to insure proper tightness. Review the video cassette before you be[...]

8 T O DRIVE TRA CTOR OFF SKID (See Operation section for location and function of controls) W ARNING: Before star ting, read, understand and follow all instructions in the Operation section of this manual. Be sure tractor is in a well-ventilated area. Be sure the area in front of tractor is clear of other people and objects. • Be sure all the abo[...]

9 CHECKLIST BEFORE Y OU OPERA TE AND ENJO Y Y OUR NEW TRACT OR, WE WISH T O ASSURE THA T Y OU RECEIVE THE BEST PERFORMANCE AND SA TISF ACTION FROM THIS QUALITY PRODUCT . PLEASE REVIEW THE FOLLOWING CHECKLIST: All assembly instructions have been completed. No remaining loose parts in carton. Battery is properly prepared and charged. (Minimum 1 hour [...]

10 OPERA TION These symbols may appear on your tractor or in literature supplied with the product. Learn and understand their meaning. BATTERY CAUTION OR WARNING REVERSE FORWARD FAST SLOW ENGINE ON ENGINE OFF OIL PRESSURE LIGHTS ON FUEL CHOKE MOWER HEIGHT PARKING BRAKE LOCKED UNLOCKED REVERSE NEUTRAL HIGH LOW ATTACHMENT CLUTCH ENGAGED MOWER LIFT DA[...]

11 KNO W Y OUR TRA CTOR READ THIS OWNER'S MANUAL AND SAFETY RULES BEFORE OPERATING YOUR TRACTOR Compare the illustrations with your tractor to familiarize yourself with the locations of various controls and adjustments. Save this manual for future reference. Our tractors conform to the safety standards of the American National Standards Instit[...]

12 The operation of any tractor can result in foreign objects thrown into the eyes, which can result in severe eye damage. Always wear safety glasses or eye shields while operating your tractor or performing any adjustments or repairs. We recommend a wide vision safety mask over spectacles or standard safety glasses. HO W T O USE Y OUR TRA CTOR TO [...]

13 TO OPERATE MOWER Y our tractor is equipped with an operator presence sensing switch. Any attempt by the operator to leave the seat with the engine running and the attachment clutch engaged will shut off the engine. • Select desired height of cut. • Start mower blades by engaging attachment clutch control. • TO STOP MOWER BLADES - disen- ga[...]

14 ADD GASOLINE • Fill fuel tank. Use fresh, clean, regular unleaded gasoline with a minimum of 87 octane. (Use of leaded gasoline will increase carbon and lead oxide deposits and reduce valve life). Do not mix oil with gasoline. Purchase fuel in quantities that can be used within 30 days to assure fuel freshness. IMPORT ANT: When operating in te[...]

15 MO WING TIPS • Tire chains cannot be used when the mower housing is attached to tractor. • Mower should be properly leveled for best mowing performance. See “ TO LEVEL MOWER HOUSING ” in the Service and Adjustments section of this manual. • The left hand side of mower should be used for trimming. • Drive so that clippings are dischar[...]

16 MAINTENANCE BEFORE EACH USE T R A C T 0 R Adjust Motion Drive Belt(s) Tension Inspect Muffler/Spark Arrester Lubrication Chart Check Brake Operation Clean Air Filter Change Engine Oil Replace Air Filter Paper Cartridge Replace Spark Plug Check Battery Level Check Tire Pressure Clean Battery and Terminals FILL IN DATES AS YOU COMPLETE REGULAR SER[...]

17 TRACT O R Always observe safety rules when performing any maintenance. BRAKE OPERATION If tractor requires more than six (6) feet stopping distance at high speed in highest gear , then brake must be ad- justed. (See “ TO ADJUST BRAKE ” in the Service and Adjustments section of this manual). TIRES • Maintain proper air pressure in all tires[...]

18 V-BELTS Check V -belts for deterioration and wear after 100 hours of operation and replace if necessary . The belts are not adjustab le. Replace belts if they begin to slip from wear . TRANSAXLE COOLING Keep transaxle free from build-up of dirt and chaff which can restrict cooling. TEMPERATURE RANGE ANTICIPATED BEFORE NEXT OIL CHANGE SAE VISCOSI[...]

19 MUFFLER Inspect and replace corroded muffler and spark arrester (if equipped) as it could create a fire hazard and/or damage. SPARK PLUGS Replace spark plugs at the beginning of each mowing season or after every 100 hours of operation, whichever occurs first. Spark plug type and gap setting are shown in “ PRODUCT SPECIFICA TIONS ” section of[...]

20 SER VICE AND ADJUSTMENTS CA UTION: Before perf or ming any ser vice or adjustments: • Depress clutch/brake pedal fully and set parking brake. • Place gearshift lever in neutral (N) position. • Place attachment clutch in “ DISENGAGED ” position. • T ur n ignition k ey “ OFF ” and remo ve ke y . • Make sure the blades and all mov[...]

21 Both Front Links Should be Equal in Length Nut “ F ” Ground Line Bottom edge of mower to ground Suspension Arm Lift Link Adjustment Nut Bottom edge of mower to ground A A FRONT -TO-BACK ADJUSTMENT IMPORT ANT: Deck m ust be level side-to side. If the following front-to-back adjustment is necessary , be sure to adjust both front links equally [...]

22 TO ADJUST STEERING WHEEL ALIGN- MENT If steering wheel crossbars are not horizontal (left to right) when wheels are positioned straight forward, remove steering wheel and reassemble per instructions in the Assembly section of this manual. TO ADJUST BRAKE Y our tractor is equipped with an adjust- able brake system which is mounted on the right si[...]

23 Retaining Ring Washers Square Key (Rear Wheel Only) Axle Cover TO REMOVE WHEEL FOR REPAIRS • Block up axle securely. • Remove axle cover, retaining ring and washers to allow wheel removal (rear wheel contains a square key - Do not lose). • Repair tire and reassemble. • On rear wheels only: align grooves in rear wheel hub and axle. Insert[...]

24 TO REPLACE HEADLIGHT BULB • Raise hood. • Pull bulb holder out of the hole in the backside of the grill. • Replace bulb in holder and push bulb holder securely back into the hole in the backside of the grill. • Close hood. INTERLOCKS AND RELAYS Loose or damaged wiring may cause your tractor to run poorly , stop running, or prevent it fro[...]