Printronix P7000 H-Series Bedienungsanleitung

Pr ogrammer ’ s Refer ence Manual KSSM Emulation For The P7000 H-Series Of Li ne Matrix Printers[...]

[...]

KSSM Emulation For The P7000 H-Series Of Li ne Matrix Printers Programme r’s Refe renc e Manual[...]

Printroni x, Inc. m akes no re presentatio ns or warrant ies of any kind rega rding this mate rial, includ ing, but no t limited to, i mplied w arranties of merchan tability an d fitness for a particu lar purpos e. Prin tronix, Inc . shall not be held r esponsibl e for erro rs contain ed herein or any omis sions from this material or for any da mag[...]

Table Of Contents 1 Introduction ........ ....... ..... ....... ..... ....... ..... ....... ..... ..... 9 About This Manua l .................... ............. ................... .................... ............ 9 Warnin gs And Spec ial Informa tion ........ .................... ................... ...... 9 Related P roduct Informa tion .........[...]

Table Of Contents Define Use r-Defined C hinese Char acter ...... ................... ................. 41 Delete Last Ch aracter i n Buffer . ............ .................... ................... .... 41 Divided Hangul Double Height .............. ............. .................... .......... 42 Enable P rinting of U pper Control Codes ...........[...]

Table Of Contents Cancel Do uble-width P rinting in DBCS Mode (One Line ) ....... ................... ................... .................... ................... .... 61 Select D BCS Mode .................. .................... ................... ................. 62 Cancel DBCS Mode ........... ................... .................... ..........[...]

Table Of Contents Turn Extend ing Table Ch aracter On/Off ...... ................... ................. 78 Turn On/Off OCRB Select ion ................ .................... ................... .... 7 8 Turn Proporti onal Mode On/Off ............. .................... ................... .... 79 Turn Underl ine On/Off .. ................... .........[...]

9 1 Intr oduction About Thi s Manual This m anual is des igned s o you ca n quickly find the in formatio n you need to operate y our print er with the Korean Sta ndard (KS ) emulation . This book does not explain how to operate the printer . For printe r operation , see th e User’s M anual. W arnings And Special Informa tion Read an d comply wi t[...]

10 Chapter 1 Softw are Featu res[...]

11 2 Configuring W ith The Contr ol Panel Introduction IMPORT ANT Configuration directly affects printer oper ation. Do not change the configuration of your printer until you are thoroughly familiar with the procedur es in this cha pter. In order to print dat a, the printer must res pond corre ctly to signa ls and commands receive d from the host c[...]

12 Chapter 2 Printing The Configuration Print ing The Conf iguration It is reco mmended y ou print a c onfigurat ion to dete rmine what i s already stored and what nee ds to be modified. You can print any o r all of the c onfigur ations show n above. Co nfiguration s 1-8 are the c ustomized configur ations. To print a configurat ion, follo w the pr[...]

13 T able 1. Printing Configur ations St ep Key Result Notes 1. Make s ure the p rinter is on. 2. 3. Allows you to ma ke confi guration changes . 4. 5. 6. 7. 8. Press un til the de sired op tion disp lays. 9. The co nfigurati on listin g begins printing. 10. Careful ly tear off the c onfiguratio n printou t. ON LINE/CLEAR OFFLINE QUICK SETUP + ENTE[...]

14 Chapter 2 Printing The Configuration NOTE: Another way to print the curren t configura tion is to go OFFL INE, press the PRT CONFIG key, and t hen press E NTER. 1 1. Locks t he E NTER key . 12. 13. S tor e the print out in a s afe place . The print er is read y for ope ration. T able 1. Printing Conf igurations (continued) St ep Key Result Notes[...]

15 The Configur ation Menu Figure 2. Configuration Menu Overview OFFLINE CONFIG. CONTROL HOST INTERFACE See the User’s Manual LinePrinter+ Printer Protocol KSSM Character Sets Define CR Code CR Bold Select Auto LF Define LF Code Printer Select 20 CPI Condensed Alt Set 80-9F CPI/LPI Select Host Command Font Attributes Graphics Spd U p Page Format [...]

16 Chapter 2 The Configuration Menu Moving With i n The Configuration Menu The exampl e in Table 2 explai ns how to cha nge the LP I value. T able 2. Changing Configurations St ep Key Result Notes 1. Make s ure the p rinter is on. 2. 3. Allows yo u to ma ke configur ation changes . 4. 5. 6. 7. 8. 9. 10. Press until the desired v alue disp lays. ON [...]

Moving Within The Configuration Menu 17 1 1 . A n asterisk indica tes the valu e sele cted. 12. Use the diagrams on the fol lowing pages to navig ate your way through the menu. Press  or  to move vertica lly; press  or  to move hor izontally and to s croll throug h the valu es. Press E NTER to sel ect a value. Press ON LINE/CLEAR , to m[...]

18 Chapter 2 The Configuration Menu Saving Y our New Configuration After c hanging al l of the ne cessar y paramete rs, it is re commen ded you sa ve them as a configurati on that ca n be stor ed for fut ure use and loaded la ter. If you do not s ave your co nfiguration before you powe r off the printe r, all of your paramete r changes will be eras[...]

Saving Your New Configuration 19 T able 3. Sav ing Configurations St ep Key Result Notes 1. If you a re already in the confi guration me nu, go t o step 5. 2. 3. Allows you to ma ke confi guration changes . 4. 5. 6. 7. 8. Press un til the de sired nu mber (1-8) dis plays. NOTE: Do not turn off the prin ter while Save is i n progress becaus e you mi[...]

20 Chapter 2 The Configuration Menu NOTE: It is reco mmended y ou print the configur ation. Go to page 13, s tep 5. If you decide n ot to print the config uration, then continue wi th the follo wing step s. 10. Locks t he ENTER ke y . 11 . 12. The pri nter is ready for operat ion. T able 3. Saving Configurations (continued) St ep Key Result Notes +[...]

Line Prin ter P lus M enu 21 LinePrinter Plus Menu Figure 3. LinePrinter Plus Menu OFFLINE Prin te r Protocol CPI/LPI Select Font Attributes KSSM (see page 25) Select CPI 10.0 CPI* 12.0 CPI 13.3 CPI 15.0 CPI 17.1 CPI 20.0 CPI Select LPI 6.0 LPI* 8.0 LPI DBCS CPI 5.0 CPI 6.0 CPI* 6.7 CPI 7.5 CPI 8.5 CPI 9.0 CPI 10.0 CPI Other CPI Typeface LQ* Near L[...]

22 Chapter 2 The Configuration Menu CPI/LPI Select This p arameter lets yo u specify the chara cters p er inch (cpi) an d lines p er inch (lpi ) values. The defaults ar e: • Select C PI - 10.0 cpi • Sele ct LPI - 6.0 lpi • DBCS CPI - 6.0 cpi Host Command • Enabl e . The de fault. Enab les all hos t printing commands . • Ignore All . This [...]

Line Prin ter P lus M enu 23 Font Attribu tes This subme nu allows you to define the foll owing font attri butes: typefac e, bold print, an d italic print. You can also specify if the AS CII charact er will print with the OCRB mode. Also, s pecify if the zero ch aracter will print with a slash. When High Density is enabled, the LQ Typ eface wil l p[...]

24 Chapter 2 The Configuration Menu • Turbo . The prin ter provid es seco nd-level speed up, w hich mea ns the speed is faster than Enhan ced mo de. • Ma tch Ty pefa ce . The input 1 80x180 dpi g rahics resolutio n will drop -dot to the res olution whi ch matches the typefac e selected . Page Form at For m Leng th Forms le ngth is th e number o[...]

KSSM Em ulati on 25 KSSM Emulat ion Figure 4. KSSM Emulation Menu Character Set s This par ameter sele cts a char acter set f or the KS SM emula tion. CR Bold Sel ect This opti on determine s whether CR ( 0x0D) will tu rn on the b old attribute. • Enabl e . The tex t after CR will be printed as bold toget her with the te xt before CR. • Disable[...]

26 Chapter 2 The Configuration Menu Define CR Co de The Defi ne CR code o ption con trols the a ction of th e printer when it receiv es a Carriage Return code (hex 0D) from the host com puter. If th is feature i s enabled, e ach time the printer receives a Carriage Ret urn, it ins erts an additiona l Line Fee d code (hex 0A) int o the data str eam.[...]

27 3 LinePrinter Plus KSSM Emulation KSSM Emula tion “Emula tion” refer s to the ability of a printer to exe cute the comman ds of other printer control l anguages. Exceptions And Diff erence s Beca use of mechan ical differ ences betwe en your p rinter (a li ne matrix printer) and movi ng print head serial matrix pr inters, s ome features are [...]

28 Chapter 3 KSSM Emulation Default V alues And S t ates Your pr inter stor es a set of typical ope rating s tates and con dition s in the flas h memory . The first ti me you pow er up the pri nter, the fac tory setti ngs in Table 4 are aut omatic ally in voked. T able 4. Factory Settings Characteri stic Defau lt Setting Select L PI 6.0 Select C PI[...]

Escape Sequenc es 29 Escape Se quences Some KS control codes con sisting of m ore than o ne charac ter are cal led escape sequence s becaus e the fir st charac ter in the s equence i s the ASCII ESCape c haracter. ESC alerts the printer tha t a special function command— not prin table chara cters—foll ows. The for mat for an escape seq uence is[...]

30 Chapter 3 Configuring The KSSM Emulation With Control Codes Super-Set Co mmands The uni que control code seq uence for both SS CC and ASSC command s are defined i n the table below: Set And Re set Codes Set and r eset are oth er ways of say ing turn on and turn off; s elect and deselec t; or enable and disa ble. Some pr inter feat ures are set a[...]

Control Code Index 31 Control Code Inde x The foll owing ind ex list s the con trol codes by funct ion, ASCII mnemonic , and page num ber. Some contr ol code funct ions can also be se lecte d at the control panel. FUNCTION ASCII CODE PAGE Setting the Page Format Set Bottom Margin ESC N n 67 Canc el Bott om Mar gi n ESC O 67 Set Left Ma rgin ESC 1 n[...]

32 Chapter 3 Configuring The KSSM Emulation With Control Codes FUNCTION ASCII CODE PAGE Selecting Characte rs Define Pa ttern for Sp ecial P rinting Effect ESC ( X n 1 n 2 a 1 a 2 a 3 40 Maste r Select ESC ! n 47 Select 1 0 CPI ESC P 51 Select 1 2 CPI ESC M 51 Select 1 5 CPI ESC g 51 Select a n Internat ional Chara cter Set ESC R n 54 Select Bold F[...]

Control Code Index 33 FUNCTION ASCII CODE PAGE Printing Graphics Sele ct Bit Imag e ESC * m n L n H d 1 … d k 55 Select 6 0-dpi G raphics ESC K n L n H d 1 d 2 … d k 52 Select 1 20-dpi G raphics ESC L n L n H d 1 d 2 … d k 52 Select 1 20-dpi G raphics ESC Y n L n H d 1 d 2 … d k 53 Select 2 40-dpi G raphics ESC Z n L n H d 1 d 2 … d k 53 [...]

34 Chapter 3 Configuring The KSSM Emulation With Control Codes FUNCTION ASCII CODE PAGE Hangul Extension Commands (continue d) Turn Ext ending Table Ch aracter On/Off FS v n 78 Turn Underl ine On/Off FS - n 80 Superset Command Barcod e Printing SS CC c t 36 Graphics P rinting : Select Bi t Image SSCC * m nL nH d1 … dk 45 Turn On/Off OCRB Prin tin[...]

Cancel Th e Alignment of SBCS Character With 35 Cancel The Alignment of SBCS Char acter With DBCS Char acter ASCII Code FS V Hex Code 28 86 Dec Code 1C 86 Purp ose Cancel s the spa cing adjus tment of SB CS charac ters to fit th e space no rmally oc cupied b y a full-wi dth DBCS char acter. Comment This comm and canc els the e ffect of the FS U com[...]

36 Chapter 3 Configuring The KSSM Emulation With Control Codes Barcode Printing ASCII Code SSCC c t ; d dat a d [; N n ; xxxx ; yyyy ][; X mmmm ][; P p ][; C ] [; H hh ][; D ][; F q data q ] Hex Code SSCC 63 t ; d dat a d [; 4E n ; xxxx ; yyyy ][; 58 mmmm ][; 50 p ] [; 43 ][; 48 hh ][; 44 ][; 46 q data q ] Dec Code SSCC 99 t ; d dat a d [; 78 n ; x[...]

Barcode Printing 37 When n = 4 : Where: xxxx = 4-digit upper left c orner x ( horizonta l axis) Where: yyyy = 4-digit upper le ft corner y (verti cal axi s) Where: X = activa tes magnific ation Where: mmmm = bar cod e magnific ation The pos sible magni fication s are lis ted in the ta ble below : n (ASCII) Selects V alue 0 1 2 3 4 Use curr ent cpi [...]

38 Chapter 3 Configuring The KSSM Emulation With Control Codes Where: P = acti vates prin table data field va riable Where: p = location of PDF ('A' ( above), 'B' (b elow, defaul t), 'N' (none)) (Note: FI M, Postbar, and PDF417 d o not supp ort this parameter.) Where: C = Calculate and plot check dig it (if availa ble [...]

Beeper 39 Where: [;F q data q ] = second ary data field (o ptional). T he seco ndary data field is only used to spe cify the bar code data whe n the primar y data fie ld is empty (two deli miters wit hout any d ata). When the p rimary da ta field is n ot empty, the secondar y data field is ignor ed. Beeper ASCII Code BEL Hex Code 07 Dec Code 7 Purp[...]

40 Chapter 3 Configuring The KSSM Emulation With Control Codes Define Pat tern for S p ecial Printing Eff ect ASCII Code ESC ( X n 1 n 2 a 1 a 2 a 3 Hex Code 1B 28 58 n 1 n 2 a 1 a 2 a 3 Dec Code 27 40 88 n 1 n 2 a 1 a 2 a 3 Purp ose Defines the patter n to be used in backg round or to fill up outlined cha racters. a 1 : 0 – To be fi lle d as bac[...]

Define User -Defined Chin ese Characte r 41 Define U ser-Def ined Chinese Charact er ASCII Code FS 2 a 1 a 2 d 1 d 2 d 3 … d 72 Hex Code 1C 50 a 1 a 2 d 1 d 2 d 3 … d 72 Dec Code 28 32 a 1 a 2 d 1 d 2 d 3 … d 72 Purp ose Set s the parame ters for us er-define d characte rs a 1 a 2 Characte r code of the character to be user -defined. d 1 d 2 [...]

42 Chapter 3 Configuring The KSSM Emulation With Control Codes Divided Hangul Double Height ASCII Code FS X n Hex Code 28 58 n Dec Code 1C 88 n Purp ose Tur ns on/off di vided doubl e height p rinting of a ll charac ters as follows: n = 0 Turns off divided double hei ght n = 1 Double hei ght upper part of cha racter n = 2 Double height lower part o[...]

Enable Upper Control Codes 43 Ena ble Up per Co ntrol Cod es ASCII Code ESC 7 Hex Code 1B 37 Dec Code 27 55 Purp ose T ells t he printe r to treat c odes from 1 28 to 15 9 as cont rol codes instead o f printable c haracter s. Comment This comma nd affects the front panel sett ing of “Alt. Se t 80-9F .” In the defau lt mode, c odes 128 t o 159 a[...]

44 Chapter 3 Configuring The KSSM Emulation With Control Codes Form Feed ASCII Code FF Hex Code 0C Dec Code 12 Purp ose Advan ces the v ertical p rint position on contin uous pape r to the top-mar gin positio n of the nex t page. Moves the horizonta l print positi on to the l eft-margin position. Comment The FF com mand canc els one-l ine doubl e-w[...]

Graphics Printing: Select Bit Image 45 Graphics Prin ting: Se lect B it Imag e ASCII Code SSCC * m nL nH d1 … dk Hex Code SSCC 2A m nL nH d1 … dk Dec Code SSCC 42 m nL nH d1 … dk Purp ose Prin ts dot-gr aphics in 1 2- or 16-do t columns , depending on the following paramete rs: m Spe cifies t he dot dens ity n L , n H Speci fies the t otal nu[...]

46 Chapter 3 Configuring The KSSM Emulation With Control Codes Line Feed ASCII Code LF Hex Code 0A Dec Code 10 Purp ose Adva nces the vertical print position one line ( in the currently set line spa cing). The LF command can cels on e-line doub le-width printing selected with the SO, ESC SO, or FS SO comman ds. Comment The user can define LF = LF o[...]

Master Sel ect 47 Master Sel ect ASCII Code ESC ! n Hex Code 1B 21 n Dec Code 27 33 n Purp ose Sel ects any com bination o f several font attribute s and enhancem ents by setti ng or clea ring the app ropriate bi t in the n paramet er, as shown in the tab le below: Where: 0 <= n <= 255 Comment This comm and canc els any attr ibutes or enhance[...]

48 Chapter 3 Configuring The KSSM Emulation With Control Codes Master Sel ect In DBCS Mode ASCII Code FS ! n Hex Code 1C 21 n Dec Code 28 33 n Purp ose Sel ects any com bination o f several font attribute s and enhancem ents by setti ng or clea ring the app ropriate bi t in the n paramet er, as shown below: Where: 0 <= n <= 255 Comment This c[...]

Master Select One-Line Attribute In DB CS Mode 49 Master Sel ect One- Line Att ribute In DBCS Mode ASCII Code ASSC 0 ! n Hex Code ASSC 30 21 n Dec Code ASSC 48 33 n Purp ose Wh ere: 0 < = n < = 255 Select a ny comb ination of several o ne-line attributes by setting or clea ring the appr opriate bi t in the n par ameter, a s show in the table [...]

50 Chapter 3 Configuring The KSSM Emulation With Control Codes Reassign Bit-image Mode ASCII Code ESC ? n m Hex Code 1B 3F n m Dec Code 27 63 n m Purp ose Assig ns th e dot densi ty us ed during the ESC K, ES C L, ES C Y , or ESC Z command s to the density specifi ed by paramet er m in the ESC * command. Where: n = 75, 76, 89, 90 0 <= m <= 40[...]

Select 1 0 CPI 51 Select 10 CPI ASCII Code ESC P Hex Code 1B 50 Dec Code 27 80 Purp ose Sel ects 10-cpi character pitch. Comment If you cha nge the fixed -pitch set ting with th is command during proportion al mod e (selected wi th the ESC p command) , the change tak es effect wh en the pri nter exits pr oportional mode. This comm and aff ects “S[...]

52 Chapter 3 Configuring The KSSM Emulation With Control Codes Select 60-d pi Graphic s ASCII Code ESC K n L n H d 1 d 2 … d k Hex Code 1B 4B n L n H d 1 d 2 … d k Dec Code 27 75 n L n H d 1 d 2 … d k Purp ose Prin ts bit -image gra phics in 8- dot col umns, at a density of 60 horizon tal by 60 ve rtical dpi , accordi ng to the fol lowing par[...]

Select 12 0-dpi Graph ics 53 Select 12 0-d pi Graph ics ASCII Code ESC Y n L n H d 1 d 2 … d k Hex Code 1B 59 n L n H d 1 d 2 … d k Dec Code 27 89 n L n H d 1 d 2 … d k Purp ose Prin ts bit -image gra phics in 8- dot col umns, at a density of 120 horizon tal by 60 ve rtical dpi , accordi ng to the fol lowing parameters : n L , n H Speci fies [...]

54 Chapter 3 Configuring The KSSM Emulation With Control Codes Select a n International Chara cter Set ASCII Code ESC R n Hex Code 1B 52 n Dec Code 27 82 n Purp ose Sel ects the se t of ch aracters pr inted for specifi c charac ter codes, as listed bel ow: n = 0 USA = 1Fra nce = 2Ger many = 3United Kingdom = 4Denmar k = 5 Sw eden = 6Italy = 7Sp ain[...]

Select Bit Ima ge 55 Select Bit Ima ge ASCII Code ESC * m n L n H d 1 … d k Hex Code 1B 2A m n L n H d 1 … d k Dec Code 27 42 m n L n H d 1 … d k Purp ose Prin ts dot-gr aphics i n 8- or 24- dot colum ns, depen ding o n the following paramete rs: m Specifi es the dot density n L , n H Specifi es the tota l number of colum ns of graphi cs data[...]

56 Chapter 3 Configuring The KSSM Emulation With Control Codes Select Bold Font ASCII Code ESC E Hex Code 1B 45 Dec Code 27 69 Purp ose Sets the we ight att ribute of the font to Bold. Comment This co mmand in crease s the weig ht of prin ted lines and charac ters, resulti ng in bolder printing. This comm and affe cts “Bold Print” on the front [...]

Sel ect Charac ter Table 57 Select Charac ter T abl e ASCII Code ESC t n Hex Code 1B 74 n Dec Code 27 1 16 n Purp ose Sel ects the ch aracter ta ble to be u sed for printi ng among t he two chara cter tables de scribed b elow: Where: 0 <= n <= 1, 48 <= n <= 49 Currently, the settin g on the fr ont panel of “Alt. Set 80-9F” det ermin[...]

58 Chapter 3 Configuring The KSSM Emulation With Control Codes Select Condensed Printing ASCII Code ESC S I Hex Code 1B 0F Dec Code 27 15 Purp ose Ent ers conden sed mode, in which character width is r educed as follow s: Comment This comm and is i gnored under the foll owing two cond itions: 15-cpi printing has been se lected with th e ESC g c omm[...]

Select DBCS Print Quality 59 Select DBCS Pri nt Qualit y ASCII Code FS x n Hex Code 1C 78 n Dec Code 28 120 n Purp ose Sel ects differe nt print qu ality ac cording to the follow ing valu es: n = 0 or 48LQ n = 1 or 49Hi -Speed n = 2 or 50Near LQ n = 3 or 51Super Hi-Sp eed n = 4 or 52No rmal n = 5 or 53Ul tra Hi-Speed Where: n = 0, 1, 2, 3, 4, 5, 48[...]

60 Chapter 3 Configuring The KSSM Emulation With Control Codes Select Double-wid th Printing ( One Line) ASCII Code SO Hex Code 0E Dec Code 14 Purp ose Doub les the width of all char acters, space s, and in tercharac ter spacing (set with the ES C SP com mand) on the same li ne as the comma nd. Comment This comm and is c ancelled wh en the pri nter[...]

Select Double -width Printing in DBCS Mode (One 61 Select Double-wid th Printing in DBCS Mode (One Line) ASCII Code FS S O Hex Code 1C 0E Dec Code 28 14 Purp ose Doub les the width of all ch aracters, space s, and in tercharac ter spacing (set with the F S S or FS T commands) on the s ame line as the comman d. Comment This comm and is c ancelle d w[...]

62 Chapter 3 Configuring The KSSM Emulation With Control Codes Select DB CS Mode ASCII Code FS & Hex Code 1C 26 Dec Code 28 38 Purp ose Sets the pr inter in DBCS mode. Comment In DBCS mod e, all the data r eceived by the printer with the MSB set will be paired with the next c haracter to be a DBCS (double byte characte r system) c haracter . O [...]

Select Italic Font 63 Select It alic Font ASCII Code ESC 4 Hex Code 1B 34 Dec Code 27 52 Purp ose Sets the s tyle attrib ute of the fo nt to Italics. Comment Thi s com mand se lec ts ita lic print ing even if th e it alic char acte r table is not select ed. This co mmand aff ects “Ita lic Prin t” on the f ront panel . The defau lt is Normal ( n[...]

64 Chapter 3 Configuring The KSSM Emulation With Control Codes Select Printer ASCII Code DC1 Hex Code 11 Dec Code 17 Purp ose Selec ts the printer after it has bee n deselec ted with th e DC3 comma nd. Comment The printer ignores thi s command if the user has set the printer offline by pressing the onl ine button. Desel ect Pr inter ASCII Code DC3 [...]

Cancel Superscript/Su bs cript Pr inting 65 Cancel Supers cript/Subscript Printing ASCII Code ESC T Hex Code 1B 54 Dec Code 27 84 Purp ose Cancel s super /subscript p rinting selected by the ESC S comma nd. Comment The defau lt is Normal (no n-super/subs cript) printi ng. Select DB CS Super/Subscript Printing ASCII Code FS r n Hex Code 28 72 n Dec [...]

66 Chapter 3 Configuring The KSSM Emulation With Control Codes Cancel V ertical Printing (S elect Horizont al Printing) ASCII Code FS K Hex Code 28 4B Dec Code 1C 75 Purp ose Prin ts all charac ters horizo ntally . Comment This comm and canc els verti cal printi ng set wit h the FS J comma nd. This is t he default s etting at power-up. The defa ult[...]

Set Abso lute Horizon tal Print Po sition 67 Set Absolute Horizont al Print Positi on ASCII Code ESC $ n1 n2 Hex Code 1B 24 n1 n2 Dec Code 27 36 n1 n2 Purp ose Moves the hori zontal pri nt position to the posi tion spe cified by the following formu la: Horizon tal position = n1 + ( n2 * 256) + left mar gin. Where: 0 <= n1 <= 127 0 <= n2 &l[...]

68 Chapter 3 Configuring The KSSM Emulation With Control Codes Set DBC S Char acter Hal f W id th ASCII Code FS S I Hex Code 28 0F Dec Code 1C 15 Purp ose Prin ts DBCS charac ters that fol low at abo ut half thei r normal width, and SBC S characte rs maintain their norm al width. Comment Use t he FS DC2 comma nd to canc el half- width DB CS charac [...]

Set Int erchara cter Spac e 69 A maxim um of 32 hori zontal tab s can be set. The prin ter does not move the print pos ition to any tabs be yond the right -margin po sition. Ho wever, all tab settin gs are stored in the print er’s memor y; if yo u move the right mar gin, you can access previous ly ignore d tabs. The printe r calcula tes tab pos i[...]

70 Chapter 3 Configuring The KSSM Emulation With Control Codes Set Interc haracter S pac ing Of SBC S Ch aracte r (Hangul Extension) ASCII Code FS T n 1 n 2 Hex Code 28 54 n 1 n 2 Dec Code 1C 84 n 1 n 2 Purp ose Set s intercha racter sp ace to the left and r ight of the SBCS charac ter. n 1 Specifie s the spa ce to the l eft of the p rinted char ac[...]

Set Page Length In Inches 71 Set Page Length In Inches ASCII Code ESC C NUL n Hex Code 1B 43 00 n Dec Code 27 67 0 n Purp ose Set s the page length to n inch es. This comm and sets the page l ength in 1-i nch incremen ts only. Sets the p age length before pa per is loaded or when th e print position is at the top-of-f orm positi on. Otherw ise, the[...]

72 Chapter 3 Configuring The KSSM Emulation With Control Codes Set Relative Horizont al Print Position ASCII Code ESC n1 n2 Hex Code 1B 5C n1 n2 Dec Code 27 92 n1 n2 Purp ose Moves the horizo ntal print p osition left or right from the current position . For righ t movement : horizo ntal positi on = n2 * 256 + n1 . For left movemen t: horizonta l[...]

Set Vertical Tab Channe ls 73 Set V ertic al T ab C hannels ASCII Code ESC / m Hex Code 1B 2F m Dec Code 27 47 m Purp ose The v alue for m speci fies the n umber of the tab sets being changed; t hese sets of tabs are call ed vertica l formatting unit (VFU) channel s. Where: 0 <= m <= 7 Comment You must use this command to select a ta b set (V[...]

74 Chapter 3 Configuring The KSSM Emulation With Control Codes Set V erti cal T a bs In VFU Channels ASCII Code ESC b m n 1 … n k NUL Hex Code 1B 62 m n 1 … n k 00 Dec Code 27 98 m n 1 … n k 0 Purp ose Set s vertical ta b positions at the li nes specif ied by n 1 to n k (in the curren t line spacing ) in tab set m , as mea sured from the top-[...]

Tab Horizontally 75 Ta b H o r i z o n t a l l y ASCII Code HT Hex Code 09 Dec Code 09 Purp ose Moves the hor izontal p rint posi tion to t he next tab to th e right of the cu rrent prin t positio n. Comment The printe r ignores thi s command i f no tab is set to the r ight of the curren t positio n or if th e next tab is to the ri ght of the r igh[...]

76 Chapter 3 Configuring The KSSM Emulation With Control Codes T urn Auto-wrap Aro und On/Off ASCII Code ESC d n Hex Code 1B 64 n Dec Code 27 100 n Purp ose Tur ns Auto- wrap Aroun d on/off ac cording to t he followi ng value s: n = 0 Tu rn off Auto-w rap Around. T he charac ters beyon d right margin will be cut. n = 1 Tu rn on Auto-w rap Around . [...]

Turn Double-Width, Double- Height Printing On/O ff 77 T urn Double-Wid th, Doubl e-Height Printing On/Off ASCII Code FS W n Hex Code 28 57 n Dec Code 1C 87 n Purp ose Tur ns on/off do uble-width, double hei ght prin ting of al l charac ters, spac es, and inter character s pacing (set w ith the FS S or F S T comm ands) on the same lin e as this comm[...]

78 Chapter 3 Configuring The KSSM Emulation With Control Codes T urn Extending T able Charac ter On/Of f ASCII Code FS v n Hex Code 1C 76 n Dec Code 28 118 n Purp ose Tur ns on/off exte nding tabl e characte rs, as foll ows: n = 0 or 48Cancels ex tending tabl e characte rs n = 1 or 49Selects e xtending tabl e charact ers Where: n = 0, 1, 48 , 49 Co[...]

Turn Proportional Mode On/Off 79 T urn Proportional Mode On/Off ASCII Code ESC p n Hex Code 1B 70 n Dec Code 27 112 n Purp ose Sel ects either proportio nal or fix ed charac ter spacin g accor ding to the foll owing values : n = 0 or 48Returns to current fi xed charac ter pitch. n = 1 or 49Selects p roportiona l spacing. Comment Changes ma de to th[...]

80 Chapter 3 Configuring The KSSM Emulation With Control Codes T urn Underline On/Off (Ha ngul Extension) ASCII Code FS - n Hex Code 1C 2D n Dec Code 28 45 n Purp ose Tur ns on/off pr inting of a line belo w all cha racters and s paces following the comma nd: n = 0 or 48Turns under line off n = 1 or 49Prints one d ot underline n = 2 or 50Prints two[...]

81 A S tandar d ASCII Character Set KEY A SCII CHA RA CTER ESC 33 27 1B OCTAL DECIMA L HEX B 7 0 0 00 11 1 1 B6 0 B5 0 0 1 1 0 1 1 0 0 0 1 1 0 1 1 COLUMN 0 1 2 3 45 67 BITS ROW B4 B2 B3 B1 0 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 0 0 0 0 00 1 0 00 1 0 00 1 1 01 0 0 01 0 1 01 1 0 01 1 1 10 0 0 10 0 1 10 1 0 10 1 1 11 0 0 11 0 1 11 1 0 11 1 1 NUL SOH ST[...]

82 Appendix A[...]

83 B Code T able Korean S t andard Code T able (KSC5601) Range: hex A 1A1 throug h hex FFFE[...]

84 Appendix B Code Table[...]

Korean Standard Code Table (KSC5601) 85[...]

86 Appendix B Code Table[...]

Korean Standard Code Table (KSC5601) 87[...]

88 Appendix B Code Table[...]

Korean Standard Code Table (KSC5601) 89[...]

90 Appendix B Code Table[...]

Korean Standard Code Table (KSC5601) 91[...]

92 Appendix B Code Table[...]

Korean Standard Code Table (KSC5601) 93[...]

94 Appendix B Code Table[...]

95 C Contact Information Print ronix Customer Su pport Center IMPORT ANT Please h ave the fo llowing infor mation av ailable prior to calling the Printronix Customer Supp ort Center: • Model num ber • Serial num ber (loc ated on the back of th e printer) • Installe d options (i.e., inter face and host type if applicab le to the p roblem) • [...]

96 Appendix C Contact Information Corporate Offices Printroni x, Inc. 14600 Myford Road P.O. Box 1955 9 Irvine, CA 92623-95 59 Phone: ( 714) 368-23 00 Fax: (714 ) 368-2600 Printroni x, Inc. Nederland B V P.O. Box 163, Nieu weweg 283 NL-6600 A d Wijchen The Net her land s Phone: ( 31) 24 64 89489 Fax: (31) 2 4 64894 99 Printroni x Schweiz GmbH 42 Ch[...]

97 Index A Adva nce Print P osition Ve rtical ly, 34 Align SBCS Cha racter with DBCS Charac ter, 34 ASCII Char acter Set, 81 Auto LF parameter , 26 B Backs pace, 35 Barcod e Printing, 36 Beepe r, 39 Bold Pr int, setti ng with contr ol panel, 23 C Cancel B old Font, 56 Cancel B ottom Margin , 67 Cancel Co ndensed Pr inting, 58 Cancel DB CS Character[...]

98 Font Expan sion, 43 Form Feed, 44 Form Wid th, settin g with cont rol panel, 24 Forms Le ngth, setting w ith contr ol panel, 24 FS seq uence s, 29 G Grap hic Pr int ing , 44 Graphics Printing, Se lect Bi t Image, 45 graphic s spd up , 23 Graphics Spd Up, L inePrinter Plus menu , 23 H Hex 80-9F , configuri ng, 26 Host Comma nd, LineP rinter Plus [...]

99 Select I talic F ont, 63 Select P rint Q uality, 63 Select P rinter , 64 Select S upersc ript/Su bscript P rinting, 64 Select V ertical P rinting, 65 Select 1 /6-inch Line Spa cing, 50 Select 1 /8-inch Line Spa cing, 50 Select 1 0 CPI, 51 Select 1 2 CPI, 51 Select 1 20-dpi G raphics , 52, 53 Select 1 5 CPI, 51 Select 2 40-dpi G raphics , 53 Sele[...]

100[...]

[...]

179981-001 B *179981-001*[...]