ProForm PATL50707.0 Bedienungsanleitung

USER'S MANUAL Model No. PATL50707.0 Serial No. CAUTION Read all precautions and instruc- tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if any par ts are missing or damaged, please see the dealer contact in- formation on the back cover of this manual or on the inclu[...]

T ABLE OF CONTENTS WARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .2 IMPORTANT PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 BEFORE YOU BEGIN . . . . . . [...]

3 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over the age of 35 or per- sons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 3. Use the treadmill only as [...]

4 20. Do not attempt to raise, lower, or move the treadmill until it is properly assembled. (See ASSEMBLY on page 6, and HOW TO FOLD A ND MOVE THE TREADMILL on page 17.) You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 2 1. When folding or moving the treadmill, make sure that the storage latch is fully closed.[...]

5 Thank you for selecting the PROFORM ® STYLE 4500 treadmill. The STYLE 4500 treadmill combines ad- vanced technology with innovative design to let you enjoy an exc ellent form o f cardiovascular exercise in t he convenience and privacy of y our h ome. And when you’re not exercising, the unique STYLE 4500 tread mill can be folded up, requiring l[...]

ASSEMBL Y A ssembly requires two persons. S et the treadmill in a cleared area and remove all packing materials; d o not dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to the top[...]

7 2. Have a second person hold the B ase (5 2) in th e position shown. Identify the Left Upright (53) (the Right Upright [ 54] has a large hole near the lower end). Hold the L eft Upright (53) so the two small holes for the latch assembly are on top as shown. Insert two M10 x 58mm Bolts (2) into the bracket on the Left Upright. Attach the Left Upri[...]

8 5. See the left inset drawing. Identify the two Frame Spacers (11). Open the included packet o f grease, and apply grease to both sides of both Frame Spacers. Then, identify the outer s ide of each Frame Spacer. Hold a Frame Spacer (11) between the Right Upright (54) and the Lift Frame (23), with the outer side of the Frame Spacer facing the Righ[...]

8. See the upper inset drawing. If there is a guard on the end of the Console Wire, press the indicated tab and remove the guard with needlenose pliers. Discard the guard. With the help of a second person, hold the Console (91) near the Right Upright (54). Remove the colored tie from the Wire Harness (39). Connect the Wire Harness to the console wi[...]

10 11. Pivot the cylinder end of the Gas Spring (98) down to the position shown. Remove the Spring Clip (96) from the end of the Gas Spring. Next, align the cylinder end of the Gas Spring (98) with the bracket in the center of the Base (52). Press the end of the Gas Spring onto the ball on the bracket. Note: It may be necessary to pivot the Frame ([...]

15. Make sure that all parts are properly tightened before you use the treadmill. Keep the included hex keys in a secure place. The hex key is used to adjust the walking belt (see page 20). To protect the floor or carpet, place a mat under the treadmill. 13. See the lower drawing. Position the Uprights (53, 54) so that the treadmill Frame (51) is c[...]

12 OPERA TION AND ADJUSTMENT T HE PRE-LUBRICATED WALKING BELT Your treadmill features a walking belt coated with high-performance lubricant. IMPORTANT: Never apply sili- cone spray or other substances to the walking belt or the walking platform. Such substances will deterio- rate the walking belt and cause excessive wear. HOW TO PLUG IN THE POWER C[...]

13 FEATURES OF THE CONSOLE The treadmill console offers a selection of features designed to make your workouts more effective. While the manual mode of the console is selected, the speed and incline of the treadmill can be changed with the touch of a button. As you exercise, the displays will provide continuous exercise feedback. You can even measu[...]

14 HOW TO USE THE MANUAL MODE 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Select the manual mode. When the key is in- serted, the manual mode will be selected. If you have selected a speed workout, reselect the manual mode by pressing the Workout Select button repeatedly until only zeros appear in the displays.[...]

15 To r ese t the dis pla ys, press the Stop button, re- move the key, and then reinsert the key. Note: The console can d isplay speed and dis- tance in either kilome- ters or miles. To see which unit of measure- ment is selected, first re- move the key, hold down the Stop button, reinsert the key into the console, and then release the Stop button.[...]

16 HOW TO USE A SPEED WORKOUT 1 . Insert the key into the console. S ee HOW TO TURN ON THE POWER on page 13. 2. Select one of the six speed workouts. To select a speed work- out, press the Workout Select button repeat- edly; “P- 1,” “P- 2,” “P- 3,” “P- 4,” “P- 5,” or “P- 6” will appear in the upper display for a few seconds [...]

17 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL FOR STORAGE Before folding the treadmill, adjust the incline to the l owest position. If you do not do this, you may damage the treadmill when you fold it. Next, unplug the power cord. CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1. [...]

18 HOW TO LOWER THE TREADMILL FOR USE 1. Hold the upper end of the treadmill with your right hand as shown. Using your left hand, pull the latch knob to the left and hold it. Next, lower the frame until it is past the latch pin. Then, slowly release the latch knob. 2. Hold the frame firmly with both hands, and lower it to the floor. To decrease the[...]

19 TROUBLESHOOTING Most treadmill problems can be solved by following the steps below. Find the symptom that applies, and follow the steps listed. If further assistance is needed, please see the front cover of this manual. PROBLEM: The power does not turn on SOLUTION: a. Make sure that the power cord is plugged into a properly earthed outlet (see p[...]

20 P ROBLEM: The walking belt slows when walked on SOLUTION: a. If an extension cord is needed, use only a 3-conductor, 1mm 2 (14-gauge) cord that is no longer than 5 ft. (1.5 m). b . If the walking belt is overtightened, treadmill perfor- mance may decrease and the walking belt may be- c ome damaged. Remove the key and U NPLUG THE POWER CORD . Usi[...]

21 These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember, proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system, exercising at the p[...]

22 1 2 M10 x 60mm Patch Bolt 2 6 M10 x 58mm Bolt 3 2 M4.2 x 13mm Tek Screw 4 14 M4.2 x 16mm Screw 5 6 M8 Star Washer 6 1 Latch Warning Decal 7 2 M5 Star Washer 8 6 M8 x 15mm Bolt 9 6 M10 Star Washer 10 16 M4.2 x 19mm Screw 11 4 Frame Spacer 12 1 Console Back 13 4 M6 x 58mm Bolt 14 2 M10 Washer 15 1 Key/Clip 16 4 M10 Jam Nut 17 1 6mm Hex Key 18 1 4m[...]

23 93 2 Belt Guide 94 1 5mm Hex Key 9 5 2 Frame Endcap 96 1 Gas Spring Clip Kit 97 1 Rear Foot, Right 98 1 Gas Spring 99 1 Receptical 100 1 Incline Motor Wire 101 2 Front Roller Washer 102 6 Cage Nut 103 2 Caution Decal 104 1 Transformer 105 1 Incline Motor Spacer 106 1 Motor Isolator 107 2 Motor Bushing 108 4 M10 Lock Nut 109 2 M4 x 10mm Screw 110[...]

24 EXPLODED DRA WING A—Model No. P A TL50707.0 R 0907A 93 17 81 86 51 76 67 28 62 89 3 83 93 6 31 46 25 25 25 25 25 75 75 56 25 71 68 28 18 61 19 44 27 29 55 36 21 42 21 29 60 36 19 42 27 44 19 19 78 50 78 64 4 10 50 41 41 41 41 10 94 97 10 10 74 1 1 1 1 108 108 44 44 101 101 21 104 95 95[...]

25 EXPLODED DRA WING B—Model No. P A TL50707.0 R 0907A 34 38 44 79 34 30 59 38 107 106 11 5 11 2 11 4 111 11 3 11 0 111 116 11 0 37 11 3 66 90 20 20 20 99 65 47 47 47 57 21 21 42 42 21 109 87 2 23 2 72 58 92 82 40 49 100 105[...]

26 EXPLODED DRA WING C—Model No. P A TL50707.0 R 0907A 80 4 3 54 11 53 14 1 9 1 11 14 9 39 85 26 63 10 63 26 26 63 3 3 77 22 88 77 24 5 9 2 9 39 70 35 108 63 26 69 69 43 45 32 43 13 16 2 8 5 8 5 2 77 10 10 10 77 63 26 10 10 10 10 35 108 70 69 69 63 26 45 32 43 43 32 13 16 84 85 7 7 8 5 102 102 8 102 103 103 96 98 52 49 16 10 48[...]

27 EXPLODED DRA WING D—Model No. P A TL50707.0 R 0907A 15 91 73 4 12 9 4 4 4 4 4 4 4 4 4 21[...]

Part No. 260171 R1207A Printed in China © 2007 ICON IP, Inc. ORDERING REPLACEMENT P ARTS To order replacement parts, please see the dealer contact information on this page or on the included service card. To help us assist you, be prepared to provide the following information when contacting us: • the model number and the serial number of the pr[...]