Ricoh JP730 Bedienungsanleitung

JP730[...]

[...]

Introdu ction This man ual desc ribes d etaile d instr uctions on t he opera tion a nd notes about the use of th is machi ne. To get ma ximum vers atili ty from this machi ne all o perato rs are r equested to read this ma nual carefu lly and foll ow the ins tructio ns. Pleas e keep thi s manual in a handy place n ear the machine. Please read the Sa[...]

Declara tion of C onformity “ The Produ ct complies with the r equirement s of the EMC Di rective 89 /336/EEC and i ts amendin g di- rectiv es and the L ow Voltage Directi ve 73/2 3/EEC and i ts amendi ng dire ctives. ” In accor dance with IEC 604 17, this m achine us es the fol lowin g symbols for the mai n switc h: a a a a means POWER O N. b [...]

i TABLE OF CONTENTS Safety I nformat ion ........ ..... ........ ..... ........ ........ ..... ........ ..... ........ ........ ..... ........ ..... ... 1 Safety During Operati on............. .......... ....... .......... .......... ....... .......... .......... ...... .......... 1 How to Read this Manual ....... ..... ........ ...... ....... ....[...]

ii 3. Replenishing Supp lies Loading Paper into the Paper Feed Tray ........ ........ ........ ..... ........ ..... ........ ...... ... 37 Replenishing Paper ............. .......... ....... .......... .......... ....... .......... ....... .......... .......... .... 37 Changing the Paper Siz e ........ .......... ...... ........... ...... .........[...]

1 Safety Information When using th is machine, the follo wing safety precautions should al ways be fol- lowed. Safety Duri ng Operation In th is manu al, the f ollowing i mportant symbols a re used : R WARNIN G: R WARNING: Indicates a potentially h azardous s ituation which, if instruct ions are not followed, could result in death or serious injury[...]

2 R CAUT ION: • Protect the machine from dampness or wet weather, suc h as rain, snow. • Unplug the power cord from the wall outlet before you move the machine. While moving the machine, you should take care that the po wer cord will not be damag ed under the machin e. • When you disconnect the power plug from the wall outlet, always pull the[...]

3 How to Read this Manual Symb ols In th is manual, the following symb ols are used: R WARNING: This symbol ind icates a potentially hazardous situation that migh t result in death or serious i njury when you misuse the mac hine without following the i n- struc tions under thi s symb ol. Be sure to re ad the i nst ructio ns, a ll of which are de- s[...]

4 What You Can Do with t his Machine Below is a quick summar y of this mac hine's fe atures and wh ere to loo k in this manual for more informati on. ❖ ❖ ❖ ❖ Standar d Prin ting See p.15 “S tand ard P rinti ng”. ❖ ❖ ❖ ❖ Adjusting the Print Image Position See p.18 “Adjusting the Prin t Image Position”. ❖ ❖ ❖ ❖ Ad[...]

5 ❖ ❖ ❖ ❖ Combining Originals onto O ne Print See p.29 “ Combine — Combini ng Two Origin als onto On e Print ” . ❖ ❖ ❖ ❖ Making Colour Prin ts See p.33 “ Making Colo ur Prin ts ” . ❖ ❖ ❖ ❖ Printi ng i n Two C olour s See p.35 “ Printi ng in Two Colo urs ” . ZCTX040E B A AB Titanium_GB-F_FM.book Page 5 Thursday,[...]

6 Machin e Exterior 1. Front door Open for acc ess to th e insid e of the ma- chine. 2. Original delivery tray The scanned original i s delivered here. 3. Contro l panel Operator controls and indicators ar e lo- cated here. See p.8 “ Control Panel ” . 4. Document f eeder cover Ope n this cov er to clea n the docume nt feeder. 5. Right side cove[...]

7 Machin e Interior 1. Document f eeder Place the original in the document feeder one sheet at a time. 2. Main switch Use to turn the powe r on or off. 3. Master eject b ox Used masters are stored here. 4. Paper de livery si de plates Use to align the prints on the pape r deliv- ery tray. 5. Paper de livery end plate Use to align th e leading edge [...]

8 Control Panel Keys 1. { { { { Image Den sity } } } } key Press to make prints darker or lighter. See p.20 “ Adjusting the Print Image Densi- ty ” . 2. { { { { Type of Original } } } } key Press to select Letter or Photo mode. See p.27 “ Selec ting Ori ginal Type ” . 3. { { { { Clea r Mod es/R ecov ery } } } } key • Clear Modes Press t o[...]

9 Indicators 1. Magnification indicators Show the preset magnification ratio se- lected. See p.23 “ Preset Reduce/En- large — Reducing an d Enlarging Using Preset Ratios ” . 2. Machine indicators Show the jammed area with the x indi- cator. See p.45 “ x Clearing Misfeeds ” . Show the cover/unit that is opened with the M indicator. See p.5[...]

10 Titanium_GB-F_FM.book Page 1 0 Thursday, December 26, 2 002 10:13 AM[...]

11 1. Operation Printing Paper The follow ing types of pr int paper are not r ecommended fo r this machin e. • Paper s maller than 90 mm × 140 mm, 3.6" × 5.6" • Paper larger than 275 mm × 395 mm, 10.8" × 15.6" • Paper heavier than 127.9 g/m 2 , 34.0 lb • Paper lighter than 35 g/m 2 , 9.3 lb • Roughly-cut paper • [...]

Operation 12 1 Origina ls Note ❒ Originals that can be set in the document feeder are as follows: • Maximum size: 275 × 395 mm, 10. 8" × 15.6" • Minimum size: 90 × 140 mm, 3.6" × 5.6 " • Maximum weight: 127.9 g/m 2 , 34.0 lb • Minimum weight: 40.7 g/m 2 , 10.8 lb ❒ If you a re print ing fro m origin als that have[...]

Printing Pr eparations 13 1 Printing Preparati ons Loading Paper A A A A Lower the paper feed tray adju st- ment lever. B B B B Release the paper feed side plate lock levers and adjust the si de plates to match the pape r size. 1: Paper Feed Side Plate Lock Le- vers C C C C Load pape r int o th e pape r fee d tray. Note ❒ Correct th e paper curl [...]

Operation 14 1 D D D D Make sure that the pap er feed side plate s touch the paper ligh t- ly. Shift the lock levers back to their original positi ons. E E E E Shift the tray adjustment lever t o the paper feeding position. Note ❒ Before you start pr inting, the paper feed tray m ust b e aligned with the fe eding position . If not, a paper mi sfe[...]

Standard Pri nting 15 1 Standard Printing - - - - Print ing In this ma nual, the word, “ printing ” is used as oppo sed to “ copying ” in or- der to di stingu ish bet ween th e proc- ess that your machine uses to make prints, and the proc ess used by a standard c opier machine. A standard copier scans in the origi- nal for each copy set mad[...]

Operation 16 1 D D D D Enter the number of prints re- quired with the number keys . Note ❒ Up to 9999 prints can be ent ered at a time. ❒ To change the num ber enter ed, press the { { { { Clear/Stop } } } } key and enter the new number. E E E E Pre ss th e { { { { Print S tart } } } } key. Note ❒ After pri nting is complete d, the same numbe [...]

After Printi ng 17 1 After Printing A A A A Lower the paper feed tray adju st- ment lever and re move the paper from the paper feed tray. B B B B Remove the prints from t he paper delivery tray. C C C C Turn off the main switch. Titanium_GB-F_FM.book Page 1 7 Thursday, December 26, 2 002 10:13 AM[...]

Operation 18 1 Adjusting the Print Image Position After m aster makin g, you can adjust the pr int ima ge po sition to suit yo ur needs. There are two ways to do thi s: ❖ ❖ ❖ ❖ Shifting the Imag e Position Forwards or Backwards Adjust th e image positio n using the { { { { Image P osition } } } } keys. ❖ ❖ ❖ ❖ Shiftin g the Image Po[...]

Adjusting the Pr int Image Positi on 19 1 Shif ting the Print Image Positi on to the Right or Left * Paper feed di recti on A A A A Lower the paper feed tray adju st- ment leve r and unlock the pape r feed si de plat es. ❖ ❖ ❖ ❖ Shifting the image to the right Shift the pa per towards t he fron t of t he ma chine . ❖ ❖ ❖ ❖ Shifting [...]

Operation 20 1 Adjusting the Print Image Density You can ad just the pr int im age densi- ty to suit your needs. T here are two ways to do this: ❖ ❖ ❖ ❖ Before Making a Master Adjust the image d ensity using the { { { { Imag e D ens ity } } } } key. ❖ ❖ ❖ ❖ After Making a Master Adjust the image d ensity using the { { { { Speed } } [...]

Changing t he Pri nting Sp eed 21 1 Changing the Pri nting Speed Use the { { { { Speed } } } } key to adjust the speed of the machine to su it the im- age density and paper type. A A A A Pre ss th e { { { { Speed } } } } key to select th e printing speed. Note ❒ The following speeds ar e avail- able: • Fast: 90 sh eets /min ute • Slow: 60 sh [...]

Operation 22 1 Stopping the Machine during the Multi-print Run When You Want to Stop the Machine during the Multi-pr int Run and Print the Next Original A A A A Pre ss th e { { { { Clear/Stop } } } } key. B B B B Place the new ori ginal in the doc- ument feed er. C C C C Enter the number of prints and pre ss th e { { { { Master Making } } } } key. [...]

Preset Reduce/Enl arge—Red ucing and Enlarging Using Pr eset Rat ios 23 1 Preset Reduce/Enlarge—Re ducing and Enlarg ing Using Pr eset Rat ios You ca n select a pr eset ratio for print- ing. Note ❒ The centre and th e leading edge of the pri nt image do not shif t when a prin t imag e is made with this fun c- tion. a: Paper Feed Direction b: [...]

Operation 24 1 ❖ ❖ ❖ ❖ Enlargement (Metric version) ❖ ❖ ❖ ❖ Enlarg ement (Inch v ersion) A A A A Select the desired reduction or en- larg eme nt rati o usi ng the { { { { En- large/Reduc e } } } } key. B B B B Make sure that the original an d the pr int paper are of the co rrect size. C C C C Place the original in the docu- ment fee[...]

Printi ng on Di fferen t Types of Pa per Thickne ss 25 1 Printing on Different Type s of Paper Thicknes s Depending on the thickness of the p a- per th at you are printing on, you need to perfor m the following steps . Feed Roller Pressure Lever A A A A Shift the feed roller pressure le- ver to the Thick o r Standard paper position. Note ❒ Shift [...]

Operation 26 1 Separation Pres sure Lever A A A A To p rev ent dou ble-f eed, adj ust the pa per s epa rati on pre ssur e us- ing the separation pressure lever. Note ❒ Paper sepa ration pressure ca n be adjusted accord ing to the pa- per weights as sho wn in the fol- lowing table. *1 This position can also be u sed if the leading edge of the pape[...]

Sele ctin g Or igin al Ty pe 27 1 Select ing Original Type Selec t one of the following tw o types to suit your originals: ❖ ❖ ❖ ❖ Photo mode Delica te tones of photogr aphs and pictur es can be rep roduced w ith this m ode . ❖ ❖ ❖ ❖ Letter mode Select t his mode wh en your o rigi- nals contain o nly letters (no pic- tures) . Note ?[...]

Operation 28 1 Auto Cycle — Pro cessing a Master and Making Print s in One Step Use the { { { { Auto Cycle } } } } key to pr ocess masters and make prints in one step. A A A A Place the original in the docu- ment feeder. B B B B Pre ss th e { { { { Auto Cycle } } } } key. C C C C Enter the number of prints re- quired with the number keys . D D D [...]

Combine — Combi ning Two Original s onto One Print 29 1 Combi ne — Combining Two Originals onto One Pr int You can pri nt tw o sepa rat e orig inal s on a single sheet of paper. The fo llow- ing diagram s show the availa ble pa- per lists a nd orient atio ns. 1: B5 JIS K , A5 K , B6 JIS K or A6 K . 2: B5 JIS K , A5 K , B6 JIS K or A6 K . 3: B4 [...]

Operation 30 1 A A A A Pre ss th e { { { { Combine } } } } key. B B B B Place the first original face down in the doc ument feed er. Note ❒ The fir st or iginal wi ll be p rinted on the leading par t of the print. C C C C Specify the reproduction rati o and check that the correct paper size is loade d. D D D D Pre ss th e { { { { Master Making } [...]

Combine — Combi ning Two Original s onto One Print 31 1 H H H H Enter the number of prints with the numb er keys. I I I I Pre ss th e { { { { Pri nt Sta rt } } } } key to ma ke your prints. Titanium_GB-F_FM.book Page 3 1 Thursday, December 26, 2 002 10:13 AM[...]

Operation 32 1 Titanium_GB-F_FM.book Page 3 2 Thursday, December 26, 2 002 10:13 AM[...]

33 2. Optiona l Functions Colour Pr inting Using the Opt ional Colour Drum In addi tion to the standard black drum, colo ur drum units (re d, blue, green, brown, yellow, purple, navy, mar oon, o range , and t eal) are also available as options. To make colour prints, a sepa rate drum un it is needed for ea ch colour. Making Colour Prints A A A A Ch[...]

Optional Fu nctions 34 2 Changing t he Colour Dr um Unit A A A A Open the front door. B B B B Lift the d rum h andle to u nloc k the drum. C C C C Slowly pull the drum ou t. Note ❒ If you cannot p ull out the drum unit, turn o ff th e main swit ch and then try again. D D D D Hold the rail on the drum and slide out th e drum while pullin g the rel[...]

Colour Pr inting Us ing the Optional Colour D rum 35 2 G G G G Slide in the drum unit until it locks in position. H H H H Lower the drum unit loc k lever. I I I I Close the front d oor. Note ❒ Make sure that the Cover Open indi cator ( M ) turns off. Printing in Two Colours After printin g in one colour, yo u can print in another colour on the sa[...]

Optional Fu nctions 36 2 C C C C Check the image position on t he trial or proof print. Note ❒ If the ima ge position i s not cor- rect, adjust it using the { { { { Image Position } } } } key (see p.18 “ Shif tin g the Prin t Image Pos ition For- wards o r Back wards ” ) or by movin g the posi tion of t he pa- per (s ee p.19 “ Shifti ng the[...]

37 3. Replenishing Supplies Loading Paper into the Paper Feed Tray The Load P aper ind icato r ( B ) an d the machine in dicato r “ A ” lights when the pa per feed tray r uns out of pap er. Replenish ing Paper A A A A Pre ss th e { { { { Clear/Stop } } } } key. Note ❒ This step is nece ssary only if you want to pause a print run to replen ish[...]

Replenish ing Suppli es 38 3 Changing the Paper Size A A A A Lower the paper feed tray adju st- ment lever. Remove the paper from the paper feed tray. B B B B Release the paper feed side plate lock levers. Adjust the paper feed side plates t o match the new pa - per size. 1: Paper Feed Side Plate Lock Le- vers C C C C Load pape r int o th e pape r [...]

When the Add Ink In dicator ( j ) Lights 39 3 When the Add Ink Indicat or ( j j j j ) Lig hts The Add Ink ind icato r ( j ) lig hts up whe n it is time to supply ink. R CAUTIO N: R CAUTIO N: R CAUTIO N: R CAUTIO N: A A A A Open the front door. B B B B Release the ink holder lock lever and pull out the ink holder. Remove th e used ink cartridge . ?[...]

Replenish ing Suppli es 40 3 C C C C Remove the cap of the new ink cartridge. D D D D Insert the new cartridge into the ink holder. Note ❒ Always supply ink of the same colour. ❒ Make sur e that t he part indicat ed by t he arrow mark is fir mly insert ed int o the guide. E E E E Slide the ink holder back in until it clicks into place. F F F F [...]

Mast er R oll R eplac eme nt 41 3 Master Ro ll Replacement The Mast er End indicator ( C ) lights up wh en it is ti me to re place the ma s- ter rol l. A A A A Open the right side cover. B B B B Open the plotter cover. C C C C Remove the used master roll and pull out both spools. Then, insert both spool s into a n ew maste r roll. Note ❒ When the[...]

Replenish ing Suppli es 42 3 F F F F Close the plotter cover using both hands until it clicks into plac e. G G G G Close the right side cover. TSLH023E Titanium_GB-F_FM.book Page 4 2 Thursday, December 26, 2 002 10:13 AM[...]

43 4. Troubleshooting If Your Ma chine d oes not Operate as You Want If a m alfu nction or a m isfeed occurs with in the m achin e, the follow ing indica tors will li ght. ❖ ❖ ❖ ❖ When the misfeed indicator ( x x x x ) lights with th e machine indicators R CAUTIO N: Note ❒ T o p r e v e n t m i s f e e d s , d o n o t l e a v e a n y t o [...]

Troublesh ooting 44 4 ❖ ❖ ❖ ❖ When the open cover/ unit indicator ( M M M M ) lights up ❖ ❖ ❖ ❖ When the supply/exch ange indicators ligh t up - - - - When a s ervice code (E-XX) is displ ayed Turn the main switch off and on. If a service code appea rs again, contact your service representative. Note ❒ If a service code appears on[...]

x Clearing Mis feeds 45 4 x x x x Clearing Misfee ds The machine indic ator shows the area where jams occur. Important ❒ When clearing misfeed s, do not turn off the main switch. If you do, your print settings are cleared. - - - - After clearing misfeeds Press the { { { { Clear M odes/Recov ery } } } } key to reset the e rror i ndicators . Titani[...]

Troublesh ooting 46 4 When “ x x x x ” and “P” light up An ori ginal misfeed o ccurs in th e document feeder. A A A A Open the cover of the docume nt feeder. B B B B Pull out the original gently. C C C C Close the cover of the document feeder . - - - - To prevent origin al misfeeds : • Originals heavier than 127.9 g/m 2 , 3 4.0 l b • Or[...]

x Clearing Mis feeds 47 4 • Bound , stapl ed, or clippe d orig inals • OHP transparencies • Translu cent pa per • Pas ted orig inals Note ❒ The first 5 mm, 0.2" of the leading edge cannot be printed. Make sure the lead- ing edge margin is at least 5 mm, 0.2". ❒ a: 5 mm , 0.2 " ❒ Remove staples or clips of originals. Fan[...]

Troublesh ooting 48 4 When “ x x x x ” and “ B ” li ght up The maste r or paper is wr apped aro und the dr um, or a paper mi sfeed oc curs in- side the machine. A A A A Pull out the drum unit. B B B B Remove th e misfed paper. C C C C Re-insert the drum unit until the dru m unit locks into position and put the lever back in pla ce. D D D D [...]

x Clearing Mis feeds 49 4 • When you use curled pap er, correct the curl as shown. • If you cannot c orrect the pap er curl, stack the p aper with th e curl face down as shown. • When the leading edge margin of the o riginal is less than 5 mm, 0.2" or there is a so lid im age on t he le ading ed ge, in sert th e or iginal w ith the wides[...]

Troublesh ooting 50 4 When “ x x x x ” and “ C ” li ght up A paper misfee d occurs in th e paper deli very sect ion. R CAUTIO N: A A A A Remove th e misfed paper. B B B B If the paper is co mpletely wrapped around t he drum, pull out the drum unit and re move the misfe d paper from the drum. C C C C Re-install the drum unit lock s in positi[...]

x Clearing Mis feeds 51 4 - - - - To prevent paper mis feeds: If the paper is curled or the origin al's leading edge margin is to o narrow, the fol- lowing action is nec essary. • When you use curled pap er, correct the curl as shown. • If you cannot c orrect the pap er curl, stack the p aper with th e curl face down as shown. GRCURL0E Tit[...]

Troublesh ooting 52 4 • When the leading edge margin of the o riginal is less than 5 mm, 0.2" or there is a so lid im age on t he le ading ed ge, in sert th e or iginal w ith the widest mar- gin first or ma ke a leading edge margin by making a cop y. When “ x x x x ” and “ D ” li ght up A A A A Open the right side cover. B B B B Open[...]

x Clearing Mis feeds 53 4 C C C C If you cou ld not remove the misfed mas ter in steps B B B B and C C C C , take out the drum and remove the misfed master from th e inside. D D D D Close the right side cover. When “ x x x x ” and “ E ” light up A A A A Check where the misfed mas ter is. Remove the misfed mast er as follows: When a master m[...]

Troublesh ooting 54 4 C Return the master eject b ox to its original position. Note ❒ Set t he dr um unit and clo se the front d oor. When a master misfeed occurs on the drum A Lift the le ver to unlock the drum unit an d pull out the unit. Refe rence For how to remove the d rum unit, see p.34 “ Changing the Colour Drum Unit ” . B Remove the [...]

When the Open Cover /Unit Indi cator ( M ) Li ghts 55 4 When the Open Co ver/Unit Indicator ( M M M M ) Ligh ts M Make sur e that the f ollowing door/un its are cl osed. The machine in dicator shows the place where the door/units are not cl osed. ❖ ❖ ❖ ❖ Right Side Cover Close the right side c over firmly un til it lo cks into posi tion. ?[...]

Troublesh ooting 56 4 ❖ ❖ ❖ ❖ Drum Unit Set th e drum unit co mpletely u ntil it lock s in po sition. Titanium_GB-F_FM.book Page 5 6 Thursday, December 26, 2 002 10:13 AM[...]

When the Master Eject Indicat or ( k ) Li ghts 57 4 When the Master E ject Indicat or ( k k k k ) Lig hts The Master Eject indic ator ( k ) lights when it is time to empty master eject box or wh en you need t o set the master eject box. A A A A Take out the master eject box and remove the used masters. Note ❒ Spread an old newspap er, then turn t[...]

Troublesh ooting 58 4 Poor P rinting Dirt on the Back Side of Paper Note ❒ When you use paper smalle r than the original, select the prope r reduction ra- tio. Otherwi se, you might get di rty background prints. ❒ When you use postcar ds and the like, the background m ight be dirty because postcards do not absorb ink w ell. ❒ You might get pr[...]

Poor Printi ng 59 4 Referen ce See p.34 “ Changing the Colour Drum Unit ” for th e details . C C C C Clean the pressu re roller with a cl ean cloth. D D D D With a clean cloth, remove any ink that has accumulated on the trailing edge of the drum unit. E E E E Insert the drum unit until it locks in position, then lower the drum unit lock lever. [...]

Troublesh ooting 60 4 G G G G Turn on the main switch. Dirt on the Front Side of Paper (Black Line/Stain) Note ❒ When black lines or stains still appear on pr ints even if you clean the above, contact your service representative. ❒ If there is no ma rgin or if there is a solid image area near the l eading edge of the original, make a margin of [...]

Poor Printi ng 61 4 White Pri nts or In complete Pr ints • Make sure that the pa per feed side plates touch the paper lightl y. Put back th e lock leve rs. When you get w hite or in compl ete p rints e ven w hen y ou ha ve chec ked t he above, perform t he following pro cedure. A A A A Pull out the drum unit. Referen ce See p.34 “ Changing the [...]

Troublesh ooting 62 4 B B B B Rem ove t he mast er fro m t he d rum. C C C C Remo ve pa per th at is st uck t o the drum. D D D D Insert the drum unit until it locks in position, then lower the drum unit lock lever. E E E E Close the front d oor. 1 2 2 TSLH031E TSLH02BE Titanium_GB-F_FM.book Page 6 2 Thursday, December 26, 2 002 10:13 AM[...]

63 5. Remarks Operatio n Notes General Cautions • Whil e prin ting, d o not tu rn off t he ma in switc h. • While printing, d o not open the d oor or co vers. • Whil e prin ting, d o not un plu g the po wer co rd. • Whil e printin g, do not move the machine. • Keep c orrosiv e liqu ids, suc h as a cid, off the ma chine. • Open and cl os[...]

Remarks 64 5 • When the mach ine is used in low temperature condit ions, the image density might decreas e. In th is case, select t he slow er printi ng speed . • Press the { { { { Proof } } } } key to perform a te st print as the first few pr ints might be light. • The outer portion of the image migh t not be printed under low temperatu re. [...]

Operation Not es 65 5 • When marks o n the printing paper o ccur, clean the paper feed roller. See p.68 “ Paper Feed Ro ller (paper feed tray) ” . • If you make a pri nt before the ink on the first print dries , the ink may adher e to the paper feed r oller and soil the print. B efore printing on the revers e side of a prin ted sheet or ove[...]

Remarks 66 5 Where to P ut Your Machine Your machin e's location should be carefully chosen because environmental co n- diti ons g reat ly aff ect its per for manc e. Environment al Conditions Optimum environm ental conditions R CAUTIO N: R CAUTIO N: R CAUTIO N: • Temperature: 10 – 30 ° C, 50 – 86 ° F • Humid ity: 20 – 90%RH • A [...]

Where to Put Your Machine 67 5 Power Connect ion R WARNING: R CAUTIO N: R CAUTIO N: ❖ ❖ ❖ ❖ Main Fram e • Make sure th e plug is firm ly inserte d in the outl et. Access t o Machine Place the machine near the power source, provi ding clearance as shown. ❖ ❖ ❖ ❖ Main Fram e 1. More than 20 cm, 8.0" 2. More than 60 cm, 23.7&quo[...]

Remarks 68 5 Maintaining Yo ur Machine To maintain high print quality, clean the foll owing pa rts and units regul ar- ly. Docu ment Fee der A A A A Lift the document f eeder cover . B B B B Clean the two areas indicated be- low usin g a damp cloth an d then wipe wit h a dry cl oth. Note ❒ If you do not clean the do cu- ment feeder , marks on the[...]

Combinat ion Chart 69 5 Combination C hart This combinat ion char t shows whic h modes can be used to gether . ❍ means that these modes ca n be used together. × means that these modes cannot be used tog ether. 12 34 56 1 Enlarge/Re duce -- ❍❍ ❍ ❍ × 2A u t o C y c l e ❍ -- ❍❍ ❍❍ 3C o m b i n e ❍❍ -- ❍❍ × 4 Type of Orig[...]

Remarks 70 5 Titanium_GB-F_FM.book Page 7 0 Thursday, December 26, 2 002 10:13 AM[...]

71 6. Specifications Main Frame ❖ ❖ ❖ ❖ Confi gura tion: Desk top ❖ ❖ ❖ ❖ Printing Process: Full automatic o ne drum stencil syst em ❖ ❖ ❖ ❖ Orig inal Typ e: Sheet ❖ ❖ ❖ ❖ Origin al Size: Maximum 275 mm × 395 mm, 1 0.8" × 15.6 " ❖ ❖ ❖ ❖ Pixel Density: 300 × 300 d pi ❖ ❖ ❖ ❖ Image Mode: Ph[...]

Specificat ions 72 6 ❖ ❖ ❖ ❖ Leading E dge Margin: 5 mm ± 3 mm , 0.2" ± 0. 12" ❖ ❖ ❖ ❖ Print Paper Weight : 35 g/m 2 to 127.9 g/m 2 , 9.3 lb to 34 lb ❖ ❖ ❖ ❖ Print Speed: 60 – 90 cpm (2 steps) ❖ ❖ ❖ ❖ First Copy Time (Master Proc ess Time): Less than 45.0 sec onds (A4 L , 8 1 / 2 " × 14" L ) [...]

Main Frame 73 6 ❖ ❖ ❖ ❖ Noise Emission *1: Sound Powe r Level Sound Pr ess ure Leve l*2 *1 These noise emi ssion levels are actual values measured in ac cordance with ISO 7779. *2 Sound p ressure level 2 is m easured from the p osition of th e operator. ❖ ❖ ❖ ❖ Power Source: See the inside fron t cover of this manual. ❖ ❖ ❖ ?[...]

Specificat ions 74 6 Consumables Note ❒ Specifica tions are subject to change with out notice. Name Size Remarks Master for LG dru m Length: 50 m, 164ft/roll Width: 240 mm, 9.5" 1 roll/pack 100 masters can be made p er roll Master for B4 dru m Length: 50 m, 164ft/roll Width: 280 mm, 11.0" 1 roll/pack 100 masters can be made p er roll In[...]

75 INDEX A Access to machine , 67 Adju stin g the Prin t Imag e De nsit y , 20 Adjusting the Print Image P osition , 18 After c leari ng misf eeds , 45 After Printin g , 17 Auto Cycle , 28 { Auto Cycl e } } } } key , 8 , 28 C Changing th e Colour Drum Unit , 34 Changin g the Paper S ize , 38 Changing the Printing Sp eed , 21 Cleari ng Misf eeds , 4[...]

76 P Paper d elivery e nd plat e , 7 Paper de livery s ide plat es , 7 Paper d elivery t ray , 7 Pape r Feed Rolle r , 68 Pape r feed s ide plate l ock le vers , 6 Pape r feed side plates , 6 Pape r feed tray , 6 Paper feed tray a djustment lever , 6 Pho to mo de , 27 Poor Printin g , 58 Pow er co nnec tio n , 67 Prepar ing the Pap er Deliv ery Tra[...]

77 MEMO Titanium_GB-F_FM.book Page 7 7 Thursday, December 26, 2 002 10:13 AM[...]

78 GB GB AE AE C 252-8600 MEMO Titanium_GB-F_FM.book Page 7 8 Thursday, December 26, 2 002 10:13 AM[...]

Operating Instructions Read this manual carefully before you u se this machine and ke ep it handy for future re ference. For safe and co rrect use, be sur e to read th e Safety Informatio n before using the mach ine. Operation Optional Functions Replenishing Supplies Troubleshooting Remarks Specifications 1 2 3 4 5 6[...]

Titanium2_EN-F2_FM_for Paper.book Page 82 Wednesday, January 25, 2006 6:30 PM[...]

i TABLE OF CONTENTS Safety Information .................... ...................... ......................... ......................... ..... 1 Safety Durin g Operation ....... ............... ............... ............... ............... ............ .............. 1 How to Read this Manual ..... .......................... ..................... .[...]

ii 3. Replenishing Supplies Loading Paper into the Paper Feed Tray .................. .......................... ............... 37 Replenishing Paper ................ .......... ............ .............. ........... ............ ............ ........... 37 Changing the Paper Size ........... ........... ............ ............ ............. ..[...]

1 Safety Information When using this machine, the fol lowing sa fety precautions should always be fol- lowed. Safety During Operation In this manual, th e following important symb ols are used: R WARNING: R WARNING: Indicates a potentially ha zardous situation which, if ins tructions are not follo wed, could result in death or serio us injury. R CA[...]

2 R CAUTION: • After you move the machin e, use the caster fixture to fix it in p lace. Other- wise the machine might move or come down to cause an inju ry. • If you use the mach ine in a confined sp ace, make sure there is a con tinuous air turnover. • Keep the machine away from humidity and dust. Otherwise a fire or an elec- tric shock migh[...]

3 How to Read this Manual Symbols In this manual, the following symbols are used: R WARNING: This symbol indicates a potentially h azardous situation that might result in death or serious injury wh en you misuse the machine without following the in- structions under this symbol. Be sure to read the instructions, all of whi ch are de- scribed in the[...]

4 What You Can Do with this Machine Below is a quick summary of this machin e's features and where to look in this manual for more information. ❖ Standard Printing See p.15 “Standar d Printing”. ❖ Adjusting the Print Image Position See p.18 “Adjusting the Print Image Po sition”. ❖ Adjusting the Print Image Density See p.20 “Adj[...]

5 ❖ Combining Originals onto One Print See p.29 “Combine—Combining Tw o Originals onto One Print”. ❖ Making Color Prints See p.33 “Making Color Prints”. ❖ Printing in Two Colors See p.35 “Printing in Two Colors”. ZCTX040E B A AB Titanium2_EN-F2_FM_for Paper.book Page 5 Wednesday, January 25, 2006 6:30 PM[...]

6 Machine Exterior 1. Front door Open for access to the inside of the ma- chine. 2. Original delivery tray The scanned origin al is delivered here. 3. Control panel Operator controls an d indicators are lo- cated h ere. See p.8 “Contro l Panel”. 4. Document feeder cover Open this cover to clean the document feeder. 5. Right side cover Open to r[...]

7 Machine Interior 1. Document feeder Place the original in the document feeder one sheet at a time. 2. Main switch Use to turn the power on or off. 3. Master eject box Used masters are stored here. 4. Paper delivery side pla tes Use to align t he prints on the paper d eliv- ery tray. 5. Paper delivery end plate Use to align th e leading edge of pr[...]

8 Control Panel Keys 1. { Image Density } key Press to ma ke prints d arker or lig hter. See p.20 “Adjusting the Print Image Density”. 2. { Type of Original } key Press to select Letter, Photo or Let- ter/Photo mode. See p.27 “Selecting Original Type”. 3. { Clear Modes/Recovery } ke y •C l e a r M o d e s Press to cle ar the previously en[...]

9 Indicators 1. Magnifica tion indic ators Show the preset magni fication ratio se- lected. See p.23 “Preset Reduce/En- large—Reducing and Enlarging Using Preset Ratios”. 2. Machine indicato rs Show the jammed area with the x indi- cator. See p.47 “ x Clearing Misfeeds”. Show the cover/uni t that is opened with the M indicator. See p.58 ?[...]

10 Titanium2_EN-F2_FM_for Paper.book Page 10 Wednesday, January 25, 2006 6:30 PM[...]

11 1. Operation Printing Paper The following types of print pape r ar e not recomme nded for this machine. • Paper smaller than 90 mm × 140 mm, 3.6" × 5.6" • Paper larger than 275 mm × 395 mm, 10.8" × 15.6" • Paper heavier than 12 7.9 g/m 2 , 34.0 lb • Paper lighter than 35 g/m 2 , 9.3 lb • Roughly-cut paper • Pa[...]

Operation 12 1 Originals Note ❒ Originals that ca n be set in the document feeder are as follows: • Maximum size: 2 75 × 395 mm, 10.8" × 15.6" • Minimum size: 90 × 140 mm, 3.6" × 5.6" • Maximum weight: 127.9 g/m 2 , 34.0 lb • Minimum weight: 40.7 g/m 2 , 10.8 lb ❒ If you are printing from originals that ha ve bol[...]

Printing Preparat ions 13 1 Printing Preparations Loading Paper A Lower the pape r feed tray adjust - ment lev er. B Release the pap er feed side plate lock levers and adjust the side plates to match the paper size. 1: Paper Feed Side Plate Lock Le- vers C Load paper into the paper feed tray. Note ❒ Correct the paper curl before setting the paper[...]

Operation 14 1 Preparing the Paper Delivery Tray A Adjust the pap er delivery side plates to match the paper size. B Adjust the paper delivery end plate to mat ch the paper size . C Turn on the ma in switch. Titanium2_EN-F2_FM_for Paper.book Page 14 Wednesday, January 25, 2006 6:30 PM[...]

Standard Pr inting 15 1 Standard Printing - Printing In this manual, the word, “printing” is used as opposed to “copying” in or- der to distinguish between the pro- cess that your machine uses to make prints, and the process used by a stan- dard copier machine. A standard co pier scans in the origi- nal for each copy set made. This ma- chin[...]

Operation 16 1 D Enter the number of prints re- quired with the numb er keys. Note ❒ Up to 9999 prints can be entered at a time. ❒ To change the number entered, press the { Clear/Stop } key and enter the new number. E Press the { Print Start } key. Note ❒ After printing is completed, the same number of prints is auto- matically set for the ne[...]

After Printing 17 1 After Printing A Lower the pape r feed tray adjust - ment lever and remove the paper from the paper feed tray. B Remove the prints from the pap er delivery tray. C Turn off the main switch. Titanium2_EN-F2_FM_for Paper.book Page 17 Wednesday, January 25, 2006 6:30 PM[...]

Operation 18 1 Adjusting the Print Image Position After master making, you can adjust the print image position to suit your needs. There are two ways to do this: ❖ Shifting the Image Position Forwards or Backwards Adjust the image position using the { Image Position } keys. ❖ Shifting the Image Position to the Right or Left Adjust the image pos[...]

Adjusting th e Print Image Posi tion 19 1 Shifting the Print Image Position to the Right or Left * Paper feed direction A Lower the pape r feed tray adjust - ment lever and unl ock the paper feed side plates. ❖ Shifting the image to the right Shift the paper towards the front of the machine. ❖ Shifting the image to the left Shift the paper towa[...]

Operation 20 1 Adjusting the Print Image Density You can adjust the print image densi- ty to suit your needs. There are two ways to do this: ❖ Before Making a Master Adjust the image density using the { Image Density } key. ❖ After Making a Master Adjust the image density using the { Speed } key. Before Making a Master A Use the { Image Density[...]

Changing the Printing Speed 21 1 Changing the Printing Speed Use the { Speed } k e y t o a d j u s t t h e speed of the machine to suit the im- age density and paper type. A Press the { Speed } key to select the printing speed. Note ❒ The following sp eeds are avail- able: •F a s t : 90 sheets/minute •S l o w : 60 sheets/minute ❒ The defaul[...]

Operation 22 1 Stopping the Machine during the Multi- print Run When You Want to Stop the Machine during the Multi-print Run and Print the Next Original A Press the { Clear/Stop } key. B Place the new origina l in the doc- ument feed er. C Enter the number of prints and press the { Master Ma king } key. When You Want to Change the Number of Prints [...]

Preset Red uce/Enlarge—Red ucing and Enla rging Using P reset Ratios 23 1 Preset Reduce/Enlarge—Reducing and Enlarging Using Preset Ratios You can select a preset ratio for print- ing. Note ❒ The center and the leading edge of the print image do not shift when a print image is made with this func- tion. a: Paper Feed Direction b: Constant ❒[...]

Operation 24 1 ❖ Enlargement (Metric version) ❖ Enlargement (Inch version) A Select the desire d reduction or en- largement ratio using the { En- large/Reduce } key. B Make sure that the origina l and the print paper are of the correct size. C Place the original in the docum ent feeder and specify the number of prints. D Press the { Master Maki[...]

Printing on Differe nt Types of Paper Thi ckness 25 1 Printing on Different Types of Paper Thickness Depending on the thickness of the pa- per that you are printing on, you need to perform the following steps. Feed Roller Pressure Lever A Shift the feed roller pressure le- ver to the Thick or Stand ard paper position . Note ❒ Shift the lever acco[...]

Operation 26 1 Separation Pressure Lever A To prevent double-feed, ad just the paper separation pres sure us- ing the sepa ration pressure lever. Note ❒ Paper separation pressure can be adjusted according to the pa- per weights as shown in the fol- lowing table. *1 This position can also be used if the leading edge of th e paper is curled, or whe[...]

Selectin g Original Type 27 1 Selecting Original Type Select one of the following two types to suit your originals: ❖ Photo mode Delicate tones of photographs and pictures can be reproduced with this mode. ❖ Letter mode Select this mode whe n your origi- nals contain only letters (no pic- tures). ❖ Letter/Photo mode Select this mode whe n you[...]

Operation 28 1 Auto Cycle—Processing a Master and Making Prints in One Step Use the { Auto Cycle } key to process masters and make pr ints in one step. A Place the original in the documen t feeder. B Press the { Auto Cy cle } key. C Enter the number of prints re- quired with the numb er keys. D Press the { Master Ma king } key. Titanium2_EN-F2_FM[...]

Combine—Co mbining Two Origin als onto One Prin t 29 1 Combine—Combining Two Originals onto One Print You can print two separate originals on a single sheet of paper. The follow- ing diagrams show the available pa- per lists and orientations. 1: B5 JIS K , A5 K , B6 JIS K or A6 K . 2: B5 JIS K , A5 K , B6 JIS K or A6 K . 3: B4 JIS L , A4 L , B5[...]

Operation 30 1 A Press the { Combine } key. B Place the first original face down in the do cument feede r. Note ❒ The first original will be printed on the leading part of the print. C Specify the reproduction ratio and check that the correct paper size is loaded. D Press the { Master Ma king } key. E The beeper sounds after the first original ha[...]

Combine—Co mbining Two Origin als onto One Prin t 31 1 H Enter the numb er of prints with the number keys. I Press the { Print Start } key to make your prints. Titanium2_EN-F2_FM_for Paper.book Page 31 Wednesday, January 25, 2006 6:30 PM[...]

Operation 32 1 Titanium2_EN-F2_FM_for Paper.book Page 32 Wednesday, January 25, 2006 6:30 PM[...]

33 2. Optional Functions Color Printing Using the Optional Color Drum In addition to the standard black drum, color drum units (re d, blue, green, brown, yellow, purpl e, navy, maroon, orange, and teal) are also available as options. To make color prints, a separate drum unit is needed for each color. Making Color Prints A Check that the m achine i[...]

Optional Func tions 34 2 B Lift the drum handle to unlock the drum. C Slowly pull the drum out. Note ❒ If you cannot pull out the drum unit, turn off the main switch and then try again. D Hold the rail on the drum and slide out the drum while pulling the release towards you. E Remove the drum unit from the machine while holding th e upper drum st[...]

Color Printing Using the Optional Color Drum 35 2 H Lower the drum unit l ock lever. I Close the front door. Note ❒ Make sure that the Cover Open indicator ( M ) turns off. Printing in Two Colors After printing in on e color, you can print in another col or on the same side of the print. Important ❒ Allow the prints to dry for a while before pr[...]

Optional Func tions 36 2 D Enter the numb er of prints with the number keys. E Press the { Print Start } key. F Remove the prints from the pap er delivery tray and re-load them into the paper feed tray, as shown in the ill ustration. G Change the drum unit. See p.33 “Changing the Color Drum Unit ”. H Place the second original and press the { Ma[...]

37 3. Replenishing Supplies Loading Paper into the Paper Feed Tray The Load Paper indicator ( B ) and the machine indicator “A” lights when the paper feed tray runs out of paper. Replenishing Paper A Press the { Clear/Stop } key. Note ❒ This step is necessary only if you want to pa use a print run to reple nish paper . B Lower the pape r feed[...]

Replenishi ng Supplies 38 3 Changing the Paper Size A Lower the pape r feed tray adjust - ment lever. Remove the paper from the paper feed tray. B Release the pap er feed side plate lock levers. Adjust the pa per feed side plates to match the new pa- per size. 1: Paper Feed Side Plate Lock Le- vers C Load paper into the pap er feed tray. Note ❒ C[...]

When the Add In k Indicator ( j ) Lights 39 3 When the Add Ink Indicator ( j ) Lights The Add Ink indicator ( j ) lights up when it is time to supply ink. R CAUTION: R CAUTION: R CAUTION: R CAUTION: R CAUTION: R CAUTION: Important ❒ Faults may occur if you use ink other than the recommended type. ❒ Our products are engineered to meet hi gh stan[...]

Replenishi ng Supplies 40 3 B Release the ink holder lock lever and pull out the ink holder. Remove the used ink cartridge. C Remove the cap of the ne w ink cartridge. D Insert the new cart ridge into the ink hold er. TSLT012E Titanium2_EN-F2_FM_for Paper.book Page 40 Wednesday, January 25, 2006 6:30 PM[...]

When the Add In k Indicator ( j ) Lights 41 3 Note ❒ Always supply ink of the same color. ❒ Make sure that the part in dicated by the arrow mark is firmly inserted into the guide. E Slide the ink holde r back in unt il it click s into plac e. F Close the front door. The machine will start idling to supply ink to the drum. Note ❒ It will stop [...]

Replenishi ng Supplies 42 3 Master Roll Replacement The Master End indicator ( C ) lights up when it is time to repl ace the mas- ter roll. A Open the rig ht side cover. B Open the plotte r cover. C Remove the used ma ster roll and pull out both s pools. Then, insert both spools into a new m aster roll. Note ❒ When the Master End indicator lights[...]

Master Roll Re placement 43 3 F Close the plotter cover using both hands until it c licks into place. G Close the right side cover. TSLH023E Titanium2_EN-F2_FM_for Paper.book Page 43 Wednesday, January 25, 2006 6:30 PM[...]

Replenishi ng Supplies 44 3 Titanium2_EN-F2_FM_for Paper.book Page 44 Wednesday, January 25, 2006 6:30 PM[...]

45 4. Troubleshooting If Your Machine does not Operate as You Want If a malfunction or a misfeed occurs with in the machine, the following indicators will light. ❖ When the misfeed indicator ( x ) lights with the machine indicators R CAUTION: Note ❒ To prevent misfeeds, do not leave any torn scraps of paper w ithin the ma- chine. ❒ When clear[...]

Troubles hooting 46 4 ❖ When the open cover/unit indicator ( M ) lights up ❖ When the supply/exchange indicators light up - When a service code (E-X X) is displayed Turn the main switch off and on. If a service code appears again, contact your service rep resentati ve. Note ❒ If a service code appears on the displa y after you turn the main s[...]

x Clearing Mi sfeeds 47 4 x Clearing Misfeeds The machine indicator shows the area where jams occur. Important ❒ When clearing misfeeds, do not turn off the main switch. If you do, your print settings are cleared. - After clearing misfeeds Press the { Clear Modes/Recovery } key to reset the error indicators. Titanium2_EN-F2_FM_for Paper.book Page[...]

Troubles hooting 48 4 When “ x ” and “P” light up An original misfeed occurs in the document feeder. A Open the cover of th e document feeder. B Pull out the origin al gently. C Close the cover of the document feeder. Titanium2_EN-F2_FM_for Paper.book Page 48 Wednesday, January 25, 2006 6:30 PM[...]

x Clearing Mi sfeeds 49 4 - To prevent original misfeeds: Use the exposure glass for the following kinds of originals. • Originals heavier than 127.9 g/m 2 , 34.0 lb • Originals lighter than 40 g/m 2 , 10.8 lb • Carbon coated origina ls • Damaged originals • Originals with glue on them • Origina ls perfor ated for rin g binders • Book[...]

Troubles hooting 50 4 When “ x ”, “ B ” and “A” light up A paper misfeed occurs in the paper feed section. R CAUTION: A Lower the pap er feed tray adjustmen t lever. B Slowly but firmly pul l out the paper. When “ x ” and “B” light up The master or paper is wrapped around the drum, or a paper misfeed occurs in- side the machine.[...]

x Clearing Mi sfeeds 51 4 C Re-insert the drum unit unt il the drum unit locks into position an d put the lever back in place. D Close the front door. - To prevent paper misfeeds: If the paper is curled or the originals le ading edge margin is too narrow, the fol- lowing action is necessary. • When you use curled paper, correct the curl as shown.[...]

Troubles hooting 52 4 • When the leading edge margin of the orig inal is less than 5 mm, 0.2" or there is a solid image on the leading edge, inse rt the original with the widest mar- gin first or make a leading edge margin by making a copy. When “ x ” and “C” light up A paper misfeed occurs in the paper delivery section. R CAUTION: A[...]

x Clearing Mi sfeeds 53 4 B If the paper is completely wrapped around the drum, pull out the drum unit and remove t he misfed paper fr om the drum. C Re-install the drum unit locks in position and p ut the lever back in p lace. Note ❒ If you followed step B or C , close the front door. - To prevent paper misfeeds: If the paper is curled or the or[...]

Troubles hooting 54 4 • If you canno t correct the paper curl, st ack the paper with the curl face down as shown. • When the leading edge margin of the orig inal is less than 5 mm, 0.2" or there is a solid image on the leading edge, inse rt the original with the widest mar- gin first or make a leading edge margin by making a copy. GRLEAD0E[...]

x Clearing Mi sfeeds 55 4 When “ x ” and “D” light up A Open the rig ht side cover. B Open the plotter cov er, and then remove the misf ed master. C If you could not remove the misfed master in steps B and C , take out the drum and remove the m isfed master from t he inside. D Close the right side cover. TSLH02EE Titanium2_EN-F2_FM_for Pape[...]

Troubles hooting 56 4 When “ x ” and “E” light up A Check where t he misfed master is. Remove the misfed master as follows: When a master misfeed occurs in the master eject section A Pull out the master eject box. B Remove the misfed master. Note ❒ Be careful not to stain your hands with ink when you touch used mas- ters. C Return the mas[...]

x Clearing Mi sfeeds 57 4 When a master misfeed occurs on the drum A Lift the lever to un lock the drum unit a nd pull out the unit. Reference For how to remov e the dr um unit, see p.33 “Changing th e Color Drum Unit”. B Remove the master from the drum. C Re-insert the drum unit un til the drum unit locks in position and put the lever back in [...]

Troubles hooting 58 4 When the Open Cover/Unit Indicator ( M ) Lights M Make sure tha t the following door /units are closed . The machine indicator shows the place whe re the door/units are not closed. ❖ Right Side Cover Close the right side cover firmly until it locks into position. ❖ Front Door Close the front door completely. Titanium2_EN-F[...]

When the Open Cover/Unit Indicator ( M ) Lights 59 4 ❖ Drum Unit Set the drum unit completely until it locks in position. Titanium2_EN-F2_FM_for Paper.book Page 59 Wednesday, January 25, 2006 6:30 PM[...]

Troubles hooting 60 4 When the Master Eject Indicator ( k ) Lights The Master Eject indicator ( k ) lights when it is time to empty master eject box or when you need to set the master eject box. A Take out the master eject box and remove the u sed masters. Note ❒ Spread an old newspaper, then turn the master eject box upside down on it to remove [...]

Poor Printing 61 4 Poor Printing Dirt on the Back Side of Paper Note ❒ When you use paper smaller than the original, select the proper reduction r a- tio. Otherwise, you might get dirty background prints. ❒ When you use postcards and the like, th e background might be dirty because postcards do not abso rb ink well. ❒ You might get prin ts wi[...]

Troubles hooting 62 4 Reference See p.33 “Changing the Co lor Drum Unit”for the details. C Clean the pressure rolle r with a clean cloth. D With a clean clot h, remove any ink that has ac cumulated on the trai ling edge of the drum unit. E Insert the drum unit until it locks in position, then lower the drum unit lock lever. F Close the front do[...]

Poor Printing 63 4 G Turn on the ma in switch. Dirt on the Front Side of Paper (Black Line/Stain) Note ❒ When black lines or stains still appear on prints even if you clean the above, contact your service representative. ❒ If there is no margin or if there is a solid image are a near the leading edge of the original, make a margin of at leas t [...]

Troubles hooting 64 4 White Prints or Incomplete Prints • Make sure that the paper feed side plat es touch the paper lightly. Put back the lock levers. When you get white or incomplete prints even when you have checked the above, perform t he following procedu re. A Pull out the dru m unit. Reference See p.33 “Changing the Co lor Drum Unit”fo[...]

Poor Printing 65 4 B Remove the master from the drum. C Remove paper that is stuck to the drum. D Insert the drum unit until it locks in position, then lower the drum unit lock lever. 1 2 2 TSLH031E TSLH02BE Titanium2_EN-F2_FM_for Paper.book Page 65 Wednesday, January 25, 2006 6:30 PM[...]

Troubles hooting 66 4 E Close the front door. Titanium2_EN-F2_FM_for Paper.book Page 66 Wednesday, January 25, 2006 6:30 PM[...]

67 5. Remarks Operation Notes General Cautions • While printing, do not turn off the main switch . • While printing, do not op en the door or covers. • While printing, do not unplug the power cord. • While printing, do not move the machine. • Keep corrosive liquids, such as acid, off the machine. • Open and close the door and covers sof[...]

Remarks 68 5 • The outer portion of the image might not be printed under low temperature. In this case, either select th e slower printing speed, or increase the r oom tem- perature. • The paper exit pawl might come in contact with the printing paper and cause black lines on the prints. In this case, increase the printing speed or make a new ma[...]

Operation Note s 69 5 Print Paper • When the paper is curled, stack the pape r wi th the curl face do wn, otherwise the pape r might wra p around the drum or stains might appear. • P os tc ar ds an d t he l i ke d o no t ab so rb in k w el l. Of fs et im ag es mi gh t a pp ea r on the rear side of subsequent prints. Solid image originals will c[...]

Remarks 70 5 Where to Put Your Machine Your machine's location sh ould be carefully chosen because environmental con- ditions great ly affect its performance. Environmental Conditions Optimum environmental conditions R CAUTION: R CAUTION: R CAUTION: • Tempera ture: 10 – 3 0 ° C, 50 – 86 ° F • Humidity: 20 – 90%RH • A strong and l[...]

Where to Put Your Ma chine 71 5 Power Connection R WARNING: R CAUTION: R CAUTION: • The socket-outlet shall be installed near the machine and shall be easily acces- sible. • Voltage must not fluctu ate more than 10%. Access to Machine Place the m achine near th e power so urce, providing clearance as shown. ❖ Main Frame 1. More than 20 cm, 8.[...]

Remarks 72 5 Maintaining Your Machine To maintain high print quality, clean the following parts and units regular- ly. Document Feeder A Lift the document feeder cover. B Clean the two ar eas indicated be- low using a damp cloth and then wipe with a dry cloth. Note ❒ If you do not clean the docu- ment feeder, marks on the feed- er will be printed[...]

Combination Ch art 73 5 Combination Chart This combination chart shows whic h modes can be used toge ther. ❍ means that these modes can be used together. × means that these modes cannot be used together. 12 34 56 1 Enlarge/Reduce -- ❍❍ ❍ ❍ × 2A u t o C y c l e ❍ -- ❍❍ ❍❍ 3C o m b i n e ❍❍ -- ❍❍ × 4 Type of Original ?[...]

Remarks 74 5 Titanium2_EN-F2_FM_for Paper.book Page 74 Wednesday, January 25, 2006 6:30 PM[...]

75 6. Specifications Main Frame ❖ Configuration: Desk top ❖ Printing Process: Full automatic one drum stencil system ❖ Original Type: Sheet ❖ Original Size: Maximum 275 mm × 395 mm, 10.8" × 15.6" ❖ Pixel Density: 300 × 300 dpi ❖ Image Mode: Photo mode Letter mod e Letter/Photo m ode ❖ Image Density: Lighter Normal Darker [...]

Specific ations 76 6 ❖ Print Paper Size: Maximum 275 mm × 395 mm, 10.8" × 15.6" Minimum 90 mm × 140 mm, 3.6" × 5.6" ❖ Leading Edge Margin: 5 mm ± 3 mm, 0.2" ± 0.12" ❖ Print Paper Weight: 35 g/m 2 to 127.9 g/m 2 , 9.3 lb to 34 lb ❖ Print Speed: 60 – 90 cpm (2 steps) ❖ First Copy Time (Master Process Ti[...]

Main Frame 77 6 ❖ Noise Emission *1: Sound Power Level Sound Pressure Level*2 *1 The above measurements made in accordance with ISO 7779 are ac tual val- ue. *2 It is measured at the position of the operator. ❖ Power Source: See the inside front co ver of this man ual. ❖ Power Consumption: ❖ Optional Equipment: •C o l o r D r u m B4 drum [...]

Specific ations 78 6 Consumables Note ❒ Specif ications are subject to change withou t notice. Name Size Remarks Master for LG drum Length: 50 m, 164ft/roll Width: 240 mm, 9.5" 1 roll/pack 100 masters can be made per roll Master for B4 drum Length: 50 m, 164ft/roll Width: 280 mm, 11.0" 1 roll/pack 100 masters can be made per roll Ink-Bl[...]

79 INDEX A Access to machine , 71 Adjusting the Print Image Density , 20 Adjusting the Print Image Position , 18 After clearing misfeeds , 47 After Printing , 17 Auto Cycle , 28 { Auto Cycle } key , 8 , 28 C Changing the Color Drum Un it , 33 Changing the Pap er Size , 38 Changing the Printing Speed , 21 Clearing Mi sfeeds , 47 { Clear Modes/Rec ov[...]

80 P Paper delivery end plate , 7 Paper delivery side plates , 7 Paper delivery tra y , 7 Paper Feed Roller , 72 Paper feed side pla te lock levers , 6 Paper feed side pla tes , 6 Paper feed tray , 6 Paper feed tray adjus tment lever , 6 Photo mode , 27 Poor Printing , 61 Power connection , 71 Preparing the Pap er Delivery Tray , 14 Preset Reduce/E[...]

81 MEMO Titanium2_EN-F2_FM_for Paper.book Page 81 Wednesday, January 25, 2006 6:30 PM[...]

82 EN USA C261-8608 MEMO Titanium2_EN-F2_FM_for Paper.book Page 82 Wednesday, January 25, 2006 6:30 PM[...]

Titaniumu2_Quick_F.fm Page 1 Th ursday, December 15, 2005 1:51 PM[...]