Runco LS-100d Bedienungsanleitung

LS-100d Ultra Short Throw, Full-HD LED Home Theater Projector and Digital High Definition (DHD™) Controller/Scaler/Processor I NSTALLATION /O PERATION M ANUAL[...]

[...]

Lightstyle™ Series LS-100d Installation/Operation Ma nual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This Limited Warranty is provided fr ee of char ge by Ru[...]

iv Lightstyle™ Series LS-100d Installation/Operation Manu al PRE L IMINAR Y • In the event of a product defec t, please follo w the claim pr ocedure provid ed below: A. Register your p roduct if you h ave not yet do ne so. Visit ht tp://www.run co.com/sup port/product -registration/ to register the p roduct. B. Contact your o riginal authorized[...]

Lightstyle™ Series LS-100d Installation/Operation Manual v PRE L IMINAR Y 4. Damage, det erioration, or malfunction re sulting from: A. Accident, abus e, misuse, neg lect, improper ve ntilation, fire, w ater, disaster, lightning, or oth er acts of natur e, smoke exposure (cigarette or otherwise), unaut horized product mo dification (includin g us[...]

vi Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Runco offers e xtended and e xpanded servic e plans. For in formation on ad ditional produc t protection, p lease ask your authorized Runco dealer, e mail service orders@runco. com or call (toll fr ee) (800) 23 -RUNCO (800-23 7-8626). RUNCO PROVIDES NO WARRANTIES, EXPRESS[...]

Lightstyle™ Series LS-100d Inst allation/Operation Manu al vii PRE L IMINAR Y Thank you for you r purchase of this qu ality Runco video produ ct! It has been designed to provide you with the qua lity of video that is exp ected in a home theat er. For the be st performan ce, please read this m anual carefully a s it is your gu ide through the menu[...]

viii Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Manufacturer’s Name: Runco International, LL C Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declares that the Prod ucts’ Model Numbers: LS-100d conform with th e provisions of: Council Directive 2004/108/EC on Electromagnetic [...]

Lightstyle™ Series LS-100d Installation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. [...]

x Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

Lightstyle™ Series LS-100d Installation/Operation Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare ™ S tandard Two Year Limited Warra nty ........ ................ ................ ........... iii Important S afety In s truction s .......................... ............. ................ ................ ................ vii Compliance I[...]

Table of Contents xii Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Mounting the LS-1 00d . ............. ................. ................ ................ ............. ................ ... 18 Floor Mount ing (Upright) ............. ................ ................ ............. ................ ............. 18 Wal[...]

Table of Contents Lightstyle™ Series LS-100d Inst allation/Operation Manu al xiii PRE L IMINAR Y 6. External Control ............... ................ ................ ................ ................ ................. ...... 69 Serial Communic ations ........ ................ ................ ............. ................ ................ .....[...]

Table of Contents xiv Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

Lightstyle™ Series LS-100d Installation/Operation Manual xv 1 List of Figures PRE L IMINAR Y 2-1. LS-100d Rear/Side/To p View . ............. ................ ................ ................ ................. ........ 5 2-2. LS-100d Input Panel .............. ................ ................ ................. ................ ............. ...[...]

List of Figures xvi Lightstyle™ Series LS-100d Installation/Operation Manual PRE L IMINAR Y Notes:[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s M anual describe s how to install, set up and ope rate the Runc o LS-100d Ultra Short-Th row LED Home Theate r Projector and DHD Controller. Throughou t this manual, t he Runco LS-1 00d Ultra Short-Th row LED Home Theater Projector an d [...]

Introduc tion 2 Lightst yle™ Series LS-100d Installation/Operation Manual PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous places throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if [...]

Introd uction Lightstyle™ Series LS-100d Installation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits Runco is proud to expa nd its best-selling Li ghtStyle™ Series projectors, with the new LS-100d with NEAR™ (Next -generation Extre me Aligned Reflection™). This ultra-short throw lens system bold ly goes where no pr[...]

Introduc tion 4 Lightst yle™ Series LS-100d Installation/Operation Manual PRE L IMINAR Y Optional Acce ss orie s : • Wall/Ceiling mount kit (p art number 955-0294-00) • HDMI-to-HDMI Cable, le ngth specified at ti me of order: • 16.4 feet (5.0 mete rs) (part number 903-101 0-00) • 24.6 feet (7.5 mete rs) (part number 903-101 1-00) • 32.8[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 5 PRE L IMINAR Y 2.1 LS-100d at a Glance Figure 2-1 shows the key LS-100d co mponents. Figure 2-1. LS-100d Rear /Side/Top View • INT AKE VENT Internal fa ns draw cool air in to the project or through t his vent. • PROJECTION LENS • EXHAUST VENTS Warm air e xits the p rojector t hrough[...]

Controls and Functions 6 Lightst yle™ Series LS-100d Installation/Operation Manual PRE L IMINAR Y 2.2 LS-100d Input Panel Figure 2-2 shows the LS-100 d input panel. Figure 2-2. L S -100 d Input Panel 1. R S -232C INPUT (9-pin, male D- S u b; null-modem connect ion) Connect the Di s play Control output on the DHD Controller to this input (see Figu[...]

Controls and Functi ons Lightstyle™ Series LS-100d Installation/Operation Manual 7 PRE L IMINAR Y 7. ERROR LED • Solid orange = Error tha t requires servicing (fan fail, Power-on self-test fail etc.) • Off = Projector functionin g normally 8. TEMP LED • Solid red = Over temper ature, user inte rvention (clear vents, tu rn on AC) may fix pro[...]

Controls and Functions 8 Lightst yle™ Series LS-100d Installation/Operation Manual PRE L IMINAR Y 6. DOWN BUTTON Use to direct-se lect aspect ratios or move the menu curso r down in the OSD. Wh en no menu is presen t on-screen, this b utton toggles thro ugh the differe nt aspect ratios, in this order: 16:9 - 4:3 - Letterbo x - VirtualWide - Cinem[...]

Controls and Functi ons Lightstyle™ Series LS-100d Installation/Operation Manual 9 PRE L IMINAR Y 1. MAIN POWER S WITCH Disconnects or ap plies power to the DHD Controller. 2. TRIGGER S Connection fo r up to three (3), 12-volt trigg er-controlled devices such as retractable screens or screen masks. Ou tput current is limited to 250 milliamperes ([...]

Controls and Functions 10 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y 2.5 LS-100d Remote Control Unit Figure 2-5 shows the LS-100 d remote cont rol, and the paragraphs th at follow describ e its functionality. Figure 2-5. DHD Controller/L S -100d Remote Contr ol ON ISF NT VID 1 VID 2 HD 1 HD 2 VID 3 COMP ISF DA Y CUST[...]

Controls and Functi ons Lightstyle™ Series LS-100d Installation/Operation Manual 11 PRE L IMINAR Y 1. IR OUTPUT INDICA TOR Lights when a button is pre ssed to indic ate that an IR signal is being transmitted. 2. LIGHT Press to illumina te the buttons. 3. ON / OFF Press to turn the DHD Cont roller and proje ctor on or off. 4. ENTER Press to select[...]

Controls and Functions 12 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y 10. HD 1 (4) / HD 2 (5) Press to select a HD (RGBHV or YPbPr component ) input or to enter t he numeric character “4” or “5.” 11. COMP (Component) (6) Press to select t he Component vide o input as the source or to enter the nu meric charact[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 13 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press down the tab on the cover an d pull the cove r in the dire ction of the arrow. 2. Insert the includ ed batteries. Ensu re that the polaritie s correctly match t he and markings inside the bat tery com[...]

Installation 14 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a quick overview of the LS-10 0d installation proce ss. The sections following this one provid e detailed instructions. Table 3-1. In s tallation Overview S tep Procedure For Detail s , Refer to page... 1 Choose a location for [...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 15 PRE L IMINAR Y 3.3 Installation Considerations Proper installation of you r projector will ensure the quality of yo ur display. Wheth er you are installing a pr ojector tempor arily or per manently, you should take th e following into account to ensure your p rojector perfo [...]

Installation 16 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Rear Projection The LS-100d cannot be used in rear-projection applications. Projection Distance and Image Size Table 3-2 gi ves the projec tion distance and image size r anges for the L S-100d. To accommo date typical installa tion tolerances, Run co recommen[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 17 PRE L IMINAR Y Audio/Video Synchronization Issues Due to its extraor dinarily high level of video processing perfor mance, the DHD Control ler may distribute video signals with a perceptible level of audio laten cy. In order to easily solve this issue, Run co recommen ds usi[...]

Installation 18 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y 3.4 Mounting the LS-100d There are se veral method s for mounting the projector . Depending on your chosen installation, one method may b e more suit able than anoth er. Floor Mounting (Upright) The projector ca n be placed on a secure, level surface suc h as[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 19 PRE L IMINAR Y 3.5 Connections to the LS-100d and DHD Controller Proceed as foll ows to connec t the DHD Controll er to the LS-100 d, your vi deo sources, external contro ller(s) – if prese nt – and AC pow er. When connect ing your equipmen t: • Turn off all equipment [...]

Installation 20 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y R S -232 Connection: Connect the Di s play Control output from the DH D Controller to the R S -232 input on the LS-100d. Use a standa rd, modular telepho ne cable with RJ11 plugs at both ends. On the LS-100d en d, use the p rovided RJ11-to- DB9 null-modem ada[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 21 PRE L IMINAR Y Connecting Source Components to the DHD Controller Connect your vid eo sources to t he DHD Controller as shown and des cribed in the sections that follow. HDMI S ource Connection s : See Fi gure 3-3. Figure 3-3. HDMI S ource Connection s Use the HDMI input s w[...]

Installation 22 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Component Video S ourc e Connection s : Co nnect your componen t video sources to the HD1, HD2 a nd/or Compone nt/SCART inputs as sh own in Figure 3-4. Figure 3-4. Component Video S ource Connection s Video 1 Y Video 2 Video 3 Pr Pb Component / SCART Y G Pb B[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 23 PRE L IMINAR Y RGBHV S ource C onnectio n s : Connect personal co mputers and/or other RGB sou rces to the HD1 and/or HD2 in puts as shown in Figure 3-5. Figure 3-5. RGBHV S ource Connection s Y G Pb B Pr R Pr R Pb B Y G H V HD1 HD2 HV or Computer R G B Camcorder Green Blue [...]

Installation 24 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y S CART RGB S S ource Connection s : Connect the g reen, blue a nd red output s from your SCART sour ce to the Compo nent/SCART inpu t on the DHD Controller. Co nnect the sync output fro m your SCART source to the Vi de o 1 input on the DHD Controller. See Fig[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 25 PRE L IMINAR Y Compo s ite S ource Connect ion s : See Figure 3- 7. Figure 3-7. Compo s ite Video S ource Connection s USB Video 1 Y Video 2 Video 3 Pr Pb HDMI 1 HDMI 2 Component / SCART Y G Pb B Pr R Pr R Pb B Y G TRIGGERS 12 3 H V HD1 HD2 HV U S B Y Pr Pb HDMI 1 H DMI 2 Co[...]

Installation 26 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Connecting an Audio Processor or Secondar y Display Device to the DHD Controller (Optional) The DHD Controller provides a sec ond HDMI output (lab eled HDMI Out (Audio Only) ) for connection to an audio rece iver/switching system or se condary display device [...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 27 PRE L IMINAR Y Additional Connections to the DHD Controller (Optional) The DHD Controller provides the followin g interfaces to exte rnal equipment that allow it to control or be contro lled by that equipme nt: • An RS-232 interface to a PC or contr ol/automa tion system; [...]

Installation 28 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Connecting 12-volt Trigger Output s to External Equipment: If your home theater contains a scr een mask or ot her 12-volt t rigger-activated e quipment, conn ect it to the 12-volt trigger ou tputs as shown in Figure 3-10 . Figure 3-10. Connecting 12-volt Trig[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 29 PRE L IMINAR Y Ethernet Network Connection: Use a standard, Cate gory 5 netw ork cable w ith an RJ-45 plug to connect a network hub, route r or gatewa y to the Et hernet por t on the DHD Controller ; see Figure 3-12 . For more informat ion about conf iguring and usin g this [...]

Installation 30 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y 3.6 Turning on the Power 1. Turn on your sour ce compone nts. 2. Turn on the main power swit ch at the rea r of the DHD Co ntroller. 3. Press the ON button on the remot e control (or t he ON/ S TA N D B Y ( ) button on DHD Controller front pa nel) to turn on [...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 31 PRE L IMINAR Y 3.7 Lens Focus Adjustment The LS-100d lens focus co ntrols are loca ted beneath a h inged doo r on the top o f the projector. To access them, press dow n on the door edge closest to the mirror and open the door. Use the Coarse Fo cus Adjust dial to a djust the[...]

Installation 32 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y 3.9 Adjusting the Image Geometry Projector and /or screen p lacement — a mong othe r things — c an cause geom etric distortion in the projected image. To correct this, the DHD Co ntroller provides precise, nine-point contr ol over the projected image geom[...]

Installation Lightstyle™ Series LS-100d Installation/Operation Manual 33 PRE L IMINAR Y “Keystoning” u sually occurs wh en the projec tor is tilted relative to th e screen. “Pincushion” distortion can sometimes occu r if the throw distance is very short and/or the projector is equipped wi th an anamorp hic lens. To correct keystoning or p[...]

Installation 34 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 35 PRE L IMINAR Y 4.1 Using the On-Screen Menus To display t he Main Menu , press the MENU button on the remote co ntrol (Figure 2- 5) or DHD Controller front panel (Figure 2-3). To select a menu it em, use the and buttons on th e remote cont rol or DHD Controller front panel to h ighlight [...]

Operation 36 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Figure 4-1. L S -100d O S D Menu S tructur e (continued) S ervice Test Vide o Color Bars 1 Color Bars 2 Focus Grey Bars Input Names Rename/Res tore Display Device - Configure Installation Picture Orientation: Auto, Floor Front , Ceiling Front, Floor Rear or Ceil[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 37 PRE L IMINAR Y Main Menu The Main Menu is the startin g point fo r accessing all DHD Controller functions. (You must enter a passcode to access the Calibr ation and Se rvice menus.) Input Source From the M ain Menu, selec t Input Sou rce to choose a video signal so urce. The ac[...]

Operation 38 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio Remote Control Key De s cription 16:9 16:9 Select 1 6:9 to vie w 16:9 DV Ds and HDTV programs in their native aspec t ratio. 4:3 images are stretched horizontally to fit a 16:9 scre en. 4:3 4:3 Standard 4:3 sca[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 39 PRE L IMINAR Y Cinema CINEMA Select Cinema to view 2.35 source material in its native aspect ratio. With a 16:9 screen and a standard LS-100d (without an anamorphic lens), the upper and lower portions of the screen are masked, but the geometry of the active image area is unchan[...]

Operation 40 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Screen The Screen Menu allows you to recall multiple sets of stored values for ce rtain controls (Output Shift and Image Alig nment) that are saved fo r each aspect ratio. Such settings are also saved “per scr een.” To reca ll the Outpu t Shift and Imag e Al[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 41 PRE L IMINAR Y Brightne ss : On your external test pa ttern source, se lect a PLUG E pattern. (PLUG E is an acronym for “Picture Line-Up Generation Equipme nt.”) Figure 4-2 shows a typical PLUG E pattern. Figure 4-2. Typical PLUGE Pattern for Adju s ting Brightne ss PLUGE p[...]

Operation 42 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Contra s t: On your external t est pattern sour ce, select a stepp ed, gray-bar pa ttern like the one shown in F igure 4-3. Figure 4-3. Typical Gray Bar Pattern for Adju s ting Contra s t Select Contrast and press ENTER . Adjust the cont rast to a point just bel[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 43 PRE L IMINAR Y 6. Select Diagnostics and press ENTER . 7. Select Blue from the Dia gnostics menu, then press ENTER to display only the blue color channe l. 8. Press EXIT (or MENU ) repeated ly to return to the Mai n Menu. 9. Select Picture from the Main Menu and press ENTER . 1[...]

Operation 44 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y S harpne ss : “Sharpness” is th e amount of high-frequen cy detail in the image . To adjust sharpness, select Shar pness from the Pictur e menu and press ENTER . On your external test pattern source, sele ct a pattern like the one show n in Figur e 4-5. Adju[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 45 PRE L IMINAR Y Height: Select Height from the Input Position menu to change the p rojected image height. Pres s t o increase the he ight; press to dec rease it. Over s can/Over s can Mode: Overscan pushes the outside edge of the active pict ure area of the video signal out beyo[...]

Operation 46 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Pha s e (RGB, Comp onent or S CART s ource s ): This control adjusts the phase of the pixel sampling clock relative to the inc oming signal. Adjust the phase wh en an RGB, Component or SCART image st ill shows shimmer or “noise” after Tracking has been optim[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 47 PRE L IMINAR Y You should save ch anges to any of the follo wing settings to a pres et; otherwise they will be lost when a new input sour ce or resolution is selected: • Brightness •C o n t r a s t • Color saturation •T i n t • Sharpness •G a m m a • Color temp er[...]

Operation 48 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Information S ignal / S y s tem: Select Infor mation from th e Main Men u, then choose either Signal or System to display informa tion about the curr ent input signal (resolu tion, frequency, typ e et cetera) and insta lled firmware ver sions, as well as othe r [...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 49 PRE L IMINAR Y Calibration Use the Calibrat ion menu to per form advanced picture quality ad justments. Th i s menu s hould be u s ed by I S F-certified technician s only . To recall the ISF N ight or ISF Day se ttings, select “ISF N ight” or “ISF Day” fr om the Memory [...]

Operation 50 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y • Color Temp: Select Color Temp from the Display Colo r - Common Settings menu to adjust the co lor temper ature. Colo r temperat ure establishes t he “color of g ray” by adjusting th e 75% white po int to various color points . What are “color point s ?[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 51 PRE L IMINAR Y • Color Gamut: Select Color Gamut from the Display Color - Common Settings men u to select a color gam ut (range) that may be diffe rent from the defaul t color gamut. Each setting de fines the prec ise hue of each primary (red, g reen and b lue) and secondary [...]

Operation 52 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y •P C E : To use the Pe rsonal Color Equalizer to define a c ustom color ga mut, choose the “PCE” Color Gam ut setting (refer to C olor Gamut on page 51). Then, choo se PCE from the Display Color - Common Set tings menu and press ENTER . • Hue/ S aturatio[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 53 PRE L IMINAR Y Di s play Color - Projector S etting s : These settings are also saved independ ently for each input an d display mode. • S atCo (BrilliantColor ™ ): Select SatCo (BrilliantColor™ ) from the Display Color - Projector Settings me nu to enable ( Low/High ) or[...]

Operation 54 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Copy/Pa s te - Memory Pre s et: You can copy and paste setting s from one memory preset to anothe r. This gives you a convenient sta rting point for creating a new preset based on an existing one , to make th e calibration pro cess less time-cons uming. For exam[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 55 PRE L IMINAR Y •A s pect Ratio - Pa s te S etting s : To apply the Output Shift a nd Image Alignm ent settings on the clipboard to a different a spect ratio an d/or screen , do either of the following: • Switch to another aspe ct ratio (for example, from 16:9 to Cinem a). ?[...]

Operation 56 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Service Use the Service m enu to access advanced projecto r configuration settings. Thi s menu s hould be u s ed by I S F-certified technician s on ly . Te s t Video: Select Test Video from th e Service Menu to acce ss the internal te st patterns on the DHD Con [...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 57 PRE L IMINAR Y Input Name s : You can give each DHD Cont roller input a d escriptive name. For example, you may want to change the default input n ame to the type of source c omponent connected t o it: “VCR,” “DVD,” “Laptop” et cetera. Inpu t names can be up to 12 c[...]

Operation 58 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Network: The options in the Network m enu allow you to configure the ne twork communication fea tures. • IP Config uration : Select IP Configur ation from the N etwork menu to either set the IP address, subnet mask and d efault gateway of the DHD Contro ller m[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 59 PRE L IMINAR Y If you prefer to do this manually, set it to Off. The DHD Controller w ill ask if you want to perform th e upgrade t he next time it is power-cycled. • Check For New Fi rmwar e: To have the DHD Controller check for new firmwar e on demand (an d perform an upgra[...]

Operation 60 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y • Error Notification : To have th e DHD Controller se nd a message to the destinatio n e-mail address whe n a “DHD Error” or “Display Err or” occurs, sele ct Error Notification from the E-Mail No tification m enu and set it to On . • Error Notif icat[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 61 PRE L IMINAR Y • Remote Network Control: Select Remote Network Cont r ol from the Networ k menu to enable or disa ble control of the DHD Controller via an IP connec tion (typically usin g a web browser) . Set it to On to allow all incoming remote network connectivity. Set it [...]

Operation 62 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y •O S D Me ss age s : When you select a new aspect ratio, inpu t source or memory pres et, the DHD Contro ller briefly displays an on-screen messag e confirming you r new selection. T o prevent the d isplay of these m essages, select OSD Messages fro m the Misc[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 63 PRE L IMINAR Y S ync Thre s hold: Select Sync Threshold to adjust the threshold at which negative puls es on the com ponent video green/lum a channel are interpreted to be sync pu lses. Sync Threshold a djustment is occasionally nec essary when a DVD p layer or HDTV sourc e sig[...]

Operation 64 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Front Panel Brightne ss : Select Front Panel Brig htness from the Servic e menu to adjust the brightness o f the front-panel LED and LCD status in dicators. • Logo LED: Select Logo LED fr om the Front Panel Brightness m enu to adjust the brightness of the larg[...]

Operation Lightstyle™ Series LS-100d Installation/Operation Manual 65 PRE L IMINAR Y S tandby Mode: Select Standby Mode from th e Service menu to control the DHD Controller’s power mana gement feat ure. •C h o o s e Low Power (the default setting) to have the DHD Controller sh ut down completely whe n it is turned o ff. This conser ves power [...]

Operation 66 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 67 PRE L IMINAR Y Maintenance The LS-100d U ltra Short-Throw L ED Home Theat er Projector and DHD Controller does not require an y routine maintena nce. There ar e no user-service able or -replacea ble parts. Unless you are a qualified, factory-tra ined Runco tec hnician, do not attempt to [...]

Maintenance and Troublesh ooting 68 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y RGB-HD or Component HD images appear “noisy” or drop out intermitten tly. • Tracking and Phase settings need adjustment. • The DHD Controller is having difficulty detecting sync pulses from the source. • Adjust Tracking and Phase[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 69 PRE L IMINAR Y In addition to using the DHD Cont roller front-panel keyp ad or remote control unit, the re are three meth ods of contr olling the LS-100 d and DHD Con troller externally : • Using a serial (R S-232) link to sen d ASC II commands and receive responses to those commands. [...]

External Control 70 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y • y is the operand, which can have one of the followi ng values: ? = “Get” operan d + = “Increment ” operand = = “Set” operan d - = “Decrement” op erand • z is the value to set for this parameter. It can have one of two formats: • In[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 71 PRE L IMINAR Y Command and Response Examples Here are som e examples of serial comman ds and their responses: Serial Command List Table 6-1 lists all supported commands. Command Command Data Re s pon s e Power query when unit is powered on (PWR?) [CR] (0;PWR=1) [CR] Set [...]

External Control 72 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Advanced Color Temp Test Pat- tern Enable ATP R/W No 0 1 No 0 = Off; 1 = On Image Alignment Bottom Left x BLX R/W Yes -100 100 No Image Alignment Bottom Left y BLY R/W Yes -100 100 No Image Alignment Bottom Middle y BMY R/W Yes -100 100 No Brightness Offs[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 73 PRE L IMINAR Y Display Blue Gain DBG R/W Yes -100 100 No Display Blue Offset DBO R/W Yes -100 100 No Default Gateway Byte 1 DE1 R/W Yes 0 255 No Default Gateway Byte 2 DE2 R/W Yes 0 255 No Default Gateway Byte 3 DE3 R/W Yes 0 255 No Default Gateway Byte 4 DE4 R/W Yes 0 2[...]

External Control 74 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Fan 2 Speed FN 2 R/W Yes 0 255 No Firmware Upgrade FWU W No N/A N/A No A ction will be performed on any setting value Gamma Advanced GMA R/W Yes 0 20 No Gamma Mode GMM R/W No 0 1 No 0 = Simple 1 = Advanced Gamma Simple GMS R/W No 0 6 No 0 = 2.0 1 = 1.8 2 [...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 75 PRE L IMINAR Y Information Current Color Space ICC R No 0 3 Yes 0 = REC601 1 = REC709 2 = RGB 3 = RGB Video Information Copied Input Source ICI R No N/A N/A Yes Information Copied Memory Pre- set ICM R No N/A N/A Yes Information Copied Screen ICR R No N/A N/A Yes Informa[...]

External Control 76 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Input Red Gain IRG R/W Yes -32 32 No Input Red Offset IRO R/W Yes -32 32 No Information Signal Format ISF R No N/A N/A Yes Information Serial Number ISN R No N/A N/A Yes Information Sync Type IS T R No 0 3 No 0 = None 1 = Separate 2 = Composite 3 = Sync-o[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 77 PRE L IMINAR Y Language LAN R/W No 0 9 No 0 = English 1 = French 2 = German 3 = Italian 4 = Spanish 5 = Portuguese 6 = Simplified Chinese 7 = Traditional Chinese 8 = Swedish 9 = Russian 10 = Japanese 11 = Kore an Image Alignment Left Middle x LMX R/W Y es -100 100 No Ima[...]

External Control 78 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y OSD Timer OST R/W Yes 0 60 No Values from 1-4 are not allowed; if increment or decrement is used, these values will be skipped. Output Shift Up Down OSU R/W Yes -200 200 No OSD Position Vertical OSV R/W Yes 0 100 No Output Shift Width OSW R/W Yes -50 0 No[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 79 PRE L IMINAR Y Power PWR R/W No 0 1 No 0 = Off; 1 = On Input Name 1 Restore R01 W No N/A N/A N o Action will be performed on any setting value Input Name 2 Restore R02 W No N/A N/A N o Input Name 3 Restore R03 W No N/A N/A N o Input Name 4 Restore R04 W No N/A N/A N o In[...]

External Control 80 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Screen Masking Test Pattern Mode Enable SMM R/W No 0 1 No 0 = Off; 1 = On Screen Masking Right SMR R/W Yes 0 200 No Screen Masking Top SMT R/W Yes 0 200 No Splash Enable SPE R/W No 0 1 No 0 = Off; 1 = On Splash Timer SPT R/W Y es 5 60 No S t a t u s S T A[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 81 PRE L IMINAR Y Trigger 1 16:9 T11 R/W No 0 1 No 0 = Off; 1 = On Trigger 1 4: 3 T12 R/W No 0 1 No Trigger 1 Letterbox T13 R/W No 0 1 No Trigger 1 VirtualWide T14 R/W No 0 1 No Trigger 1 Cinema T1 5 R/W No 0 1 No Trigger 1 Virtual Cinema T16 R/W No 0 1 No Trigger 1 Native [...]

External Control 82 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Image Alignment Top Right y TRY R/W Yes -100 100 No Test Video TST R/W No 0 4 No 1 = Color Bars 1 11 = Color Ba rs 2 12 = Gray Bars 13 = Focus 14 = Off 15 = Off (Restore OSD) VFD Brightness VFD R/W Yes 0 4 No 0 = 0% 1 = 25% 2 = 50% 3 = 75% 4 = 100% Table [...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 83 PRE L IMINAR Y 6.2 Using Discrete IR Codes The DHD Contr oller accepts comm ands in the form of IR signals that c onform to the Phillips RC5 protocol. Each DHD Controller re mote control button has an RC5 control code associat ed with it. You can use these codes to progr[...]

External Control 84 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Figure 6-1. RC5 Me ss age Format S 1 S 2 TB A 4 A 3 A 2 A 1 A 0 C 5 C 4 C 3 C 2 C 1 C 0 S tart Bit s Toggle Bit Addre ss Bit s Command Bit s 1101 00 0 100000 1 14 cycle s , 24.9 m s 64 cycle s , 113.8 m s Fir s t Pac k et Repeated Pac k et Data Wo r d Enc[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 85 PRE L IMINAR Y IR Command List Table 6 -2 lists the RC5 control code s for the DHD Co ntroller. ➤ Table 6-2. RC5 Control Code s for the DHD Controller Function RC5 Data from Remote Control (Note) RC5 Data with Toggle Bit = 1 (Note) De s cription 16:9 0x3449 0x3C49 16:9[...]

External Control 86 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y STOFF 0x3460 0x3C60 Sets the sleep timer to Off ST30MIN 0x3461 0x3C61 Sets the sleep timer to 30 minut es ST60MIN 0x3462 0x3C62 Sets the sleep timer to 60 minut es ST90MIN 0x3463 0x3C63 Sets the sleep timer to 90 minut es ST2HRS 0x3464 0x3 C64 Sets the sl[...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 87 PRE L IMINAR Y 6.3 Using HDMI CEC Messages The DHD Controller acc epts and can respond to CEC command messages from a disc player, satellite re ceiver or DVR/set-top bo x via an HDMI connection . Using CEC, the DHD Controller can perform the fo llowing action s: • Turn[...]

External Control 88 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y Give Physical Address 0x83 – √ Set Stream Path 0x86 – √ Get CEC Version 0x9F – √ Abort Message 0xFF – √ User Control Pressed 0x44 – √ User Control Released 0x45 – √ Give OSD Name 0x46 – √ Menu Request 0 x8D – √ Give Device [...]

External Control Lightstyle™ Series LS-100d Installation/Operation Manual 89 PRE L IMINAR Y Note s :[...]

External Control 90 Lightstyle™ Series LS-100d Inst allation/Operation Manual PRE L IMINAR Y[...]

Lightstyle™ Series LS-100d Installation/Operation Manual 91 PRE L IMINAR Y 7.1 LS-100d Specifications Table 7-1 lists th e LS-100d spec ifications. 7. S pecification s Table 7-1. L S -100d S pecification s Projector Type: Digital Light Processing™ (DLP™),Single-Chip, 16:9 SuperOnyx™ DM D™ with Infini Light TM Illumination Illumination: RG[...]

Specifications 92 Lightstyle™ Series LS-100d Inst allation/Operation Manual P RELI M INARY Brightne ss and Contra s t: Cin ema S tandard s Mea s urement S y s tem (C S M S ) S pecification s - Brightness: 12.7 foot- Lamberts (fL) - Contrast Ratio: 330:1 These measurements are taken from the projector in a controlled, home theater environment. Al [...]

Specifications Lightstyle™ Series LS-100d Installation/Operation Manual 93 PRE L IMINAR Y 7.2 DHD Controller Specifications Table 7-2 lists the DHD Cont roller specifications. Table 7-2. DHD Controller S pecification s A s pect Ratio s : 4:3, Letterbox, 16:9, VirtualW ide, Cine ma, Virtual Cinema, Native Video S tandard s : • HDMI and DVI with [...]

Specifications 94 Lightstyle™ Series LS-100d Inst allation/Operation Manual P RELI M INARY 7.3 Overall Dimensions – LS-100d Figure 7-1 sho ws the LS-100d dimensions (all di mensions are in m illimeters). Figure 7-1. Overall Dimen s ion s – L S -100d Regulatory Appro val s : cTUVus, FCC cla ss B, CE, RoHS, China RoH S, WEEE, C-Tick, CCC, local[...]

Specifications Lightstyle™ Series LS-100d Installation/Operation Manual 95 PRE L IMINAR Y 7.4 Supported Timings Table 7-3 lists the signal types suppo rted by each input on the DHD Controlle r. Table 7-3. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) S upported? ( ?[...]

Specifications 96 Lightstyle™ Series LS-100d Inst allation/Operation Manual P RELI M INARY 1360x768 1360x768 60.00 47.712 85.500 √√√ – – 1400x1050 1400x1050 60.00 64.744 101.000 √√√ – – 60.00 65.317 121.750 √√√ – – 75.00 82.278 156.000 √√√ – – 1600x1200 1600x1200 60.00 75.000 162.000 √√√ – – 1680x[...]

[...]

Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com 020-1174-00 Rev. A December 2011[...]