Runco XP-50 Bedienungsanleitung

XP-50 XP-65 High Definition, 1080p Flat Panel Plasma Displays with I NSTALLATION /O PERATION M ANUAL[...]

[...]

CinemaWall XP-50/XP-65 Insta llation/Operation Manual iii PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warranty Congratulations o n your purchase of a Runco® product ! With proper installation, se tup and care, you should enjoy many yea rs of unpara lleled video p erformance. This RuncoCare St andard Limite d Warranty is provi ded free o[...]

iv Cine maWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y In the event o f a product de fect, please fo llow the warra nty claim proc edure provided b elow: 1. The Custome r is required to contact a Runco deale r or Runco Technical Suppo rt via E-mail at support@runc o.com or via phone at (toll fr ee) 800-23RUNCO (80 0-237-8626). If [...]

CinemaWall XP-50/XP-65 Inst a llation/Operation Manual v PRE L IMINAR Y j Failure to follow mainten ance procedu res as outline d in the pro duct’s user g uide where a schedule is spec ified for regular cleaning of th e product k Opening the pro duct and/or tam pering with intern al circuitr y l Products lost, stolen or discarded m Any damage or [...]

vi CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y RUNCO’S MAXIMUM AGGREGATE LIABILITY HEREUNDER IS LI MITED TO THE COST OF REPAIR OR REPLACEMENT OF THE PRODUCT. 1. RUNC O SHALL NOT BE LIABLE FOR DAMAGE TO OTHER PROPERTY CAUSED BY ANY DEFECT IN THE PRODUCT, DAMAGES BASED UPON INCONVENIENCE, LOSS OF USE OF THE PRODUCT, LOSS OF[...]

CinemaWall XP-50/XP-65 Inst a llation/Operati on Manual vii PRE L IMINAR Y Thank you for your purchas e of this quality Run co product! For best perfor mance, please read this ma nual carefully a s it is you r guide throug h the men us and oper ation. 1. Read these instruction s. 2. Keep these instructions . 3. Heed all warnings. 4. Follow all inst[...]

viii CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Manufacture r’s Name: Runc o Internation al, LLC Manufacture r’s Address: 119 5 NW Compton Dr ive, Beaverton, OR 97006-19 92 hereby declare s that the p roducts Mode l Numbers: XP-50 and XP-65 conform with th e provisions of: Council Directive 2004/108/EC on Electromagnet[...]

CinemaWall XP-50/XP-65 Inst a llation/Operation Manual ix PRE L IMINAR Y NOTE: This equipment has b een tested a nd found to comply with th e limits for a C lass B digital device, pursua nt to Part 15 o f the FCC Rules. T hese limits ar e designed to p rovide reasonab le protection ag ainst harmful inter ference in a resid ential installation. This[...]

x CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

CinemaWall XP-50/XP-65 Inst a llation/Operation Manual xi 1 Table of Content s PRE L IMINAR Y RuncoCare™ S tandard Two Year Limited Warran ty ........ ................... ................. ....... iii Important S afety In s truction s .......................... ............. ................ ................ ................ vii Compliance Inform[...]

xii Cine maWall XP-50/XP-65 In stallation/Operation Manual PRE L IMINAR Y 4. Operation .......... ................ ................ ................ ................ ................ ............. .......... 21 Turning on t he Power ... ................. ................ ................ ................ ................ ............. 2 1 Changing [...]

CinemaWall XP-50/XP-65 Installa tion/Operation Manual xiii 1 Li s t of Figure s PRE L IMINAR Y 2-1. CinemaWall X P-50 Front-Pan el Controls and Ind icators .......................... ................ ..... 5 2-2. CinemaWall X P-65 Front-Pan el Controls and Ind icators .......................... ................ ..... 5 2-3. CinemaWall Re ar Panel .[...]

List of Figures xiv CinemaWall XP-50/XP-65 In stallation/Operation Manual PRE L IMINAR Y Note s :[...]

CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 1 PRE L IMINAR Y 1.1 About This Manual This Owner’s Manual d escribes how to install, set up and operate a Runco CinemaWall XP-50/XP-65 Flat-Panel Plasma Di splay Monitor. Throughout th is manual, the Run co CinemaWall XP-50/XP-6 5 Flat-Panel Pla sma Display Monitor ar e referred to colle cti[...]

Introduc tion 2 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y Graphic Convention s : These symb ols appear in n umerous places throughout the manual, to emp hasize points th at you must k eep in mind to a void problems wit h your equipment o r injury: 1.2 Using This Manual Use the following ta ble to locate the spec if ic in[...]

Introd uction CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 3 PRE L IMINAR Y 1.3 Description, Features and Benefits The CinemaWall XP -50/XP-65 Flat-Pan el Plasma Display Monit or takes picture quality to a whole new le vel, boasting o ur brightest pict ure, best co ntrast ratio, dee pest black le vels and most spo t-on high definit ion co[...]

Introduc tion 4 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y Parts List Your CinemaWall is shipped with the following items. If any items are missing or damaged , please contact y our Runco de aler or Runco C ustomer Service at (8 00) 23-RUNCO. • CinemaWall XP-50/ XP-65 Flat-Panel Plasma Disp lay Monitor • AC Power Cord[...]

CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 5 PRE L IMINAR Y 2.1 CinemaWall at a Glance Controls and Indicators Figure 2-1 and Figure 2-2 sh ow the Cinema Wall front-panel con trols and indicato rs. Figure 2-1. CinemaWall XP-50 Front-Pane l Control s and Indicator s Figure 2-2. CinemaWall XP-65 Front-Pane l Control s and Indicator s 2. C[...]

Controls and Functions 6 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y 1. DI S PLA Y S TA N D Optional accessory for table-top installations. 2. POWER BUTTON Connects or disc onnects the d isplay panel f rom the AC po wer source. 3. S T A NDBY/ON INDICA TOR - Lights solid gre en to indicate normal operat ion; - Flashes green[...]

Controls and Functi ons CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 7 PRE L IMINAR Y Connectors Figure 2-3 show s the rear-panel connector loc ations on the Ci nemaWall. Figure 2-3. CinemaWall Rear Panel 1. S LOT 1 (Dual HDMI input) Two, HDCP -complia nt digital video inp uts. 2. S LOT 2 (Dual HDMI input) Two, HDCP -complia nt digital vi[...]

Controls and Functions 8 CinemaWall XP-50/XP-65 Inst allation/Operation Manu al PRE L IMINAR Y 3. S LOT 3 (COMPONENT/RGB input) Video/audio inp ut (3 x BNC, 2 x RCA) fo r connecting eith er RGB (with sync o n green) or component hig h-definition t elevision signals. 4. PC IN Provides a 15-pi n VGA connection and a 3.5-mm, stereo audio connect ion t[...]

Controls and Functi ons CinemaWall XP-50/XP-65 Inst a llation/Operation Manual 9 PRE L IMINAR Y 2.2 CinemaWall Remote Control Figure 2-4 shows the Cinema Wall remote control an d describes its functiona lity. Figure 2-4. CinemaWall Remote Contro l RESET RETURN 30 60 0 90 OFF TIMER 90 1 2 3 4 PC 4:3 10:00 1 2 3 4 ON SURROUND S URROUND button Press t[...]

Controls and Functions 10 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

CinemaWall XP-50/XP-65 Inst allation/Operation Manual 11 PRE L IMINAR Y 3.1 Remote Control To install batteries in the remote co ntrol: 1. Press on the tab on the batte ry compartmen t cover and lift t he cover in th e direction of the arrow . 2. Insert the incl uded batteries. Ensure that t he polarities c orrectly m atch the and markings inside t[...]

Installation 12 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 3.2 Quick Setup Table 3-1 gives a qui ck overview of the Cinema Wall installation process. The sections following this one provid e detailed instructions. Installation sh ould be performed by a qualified custom video installation specialist. Table 3-1. In s tallati[...]

Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 13 PRE L IMINAR Y 3.3 Installation Considerations Proper installa tion of your Cinema Wall will ensure the highest pos sible picture quality. Whether you are installing the CinemaWall temporarily or perm anently, you s hould take the following int o account to ensure that it perform[...]

Installation 14 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • As it lies flat with th e screen face down. Place the pr otective sheet, which was wrappe d around the plasma monito r when it was packaged, b etween the scr een and your work surfac e to avoid scratching o r otherwise damagi ng the screen su rface. Ambien t Li[...]

Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 15 PRE L IMINAR Y Other Considerations Here are some other co nsiderations and tips that can help improve your inst allation, avoid damage and prolo ng operating life: • Keep the amb ient temperatu re constant and belo w 35°C (95°F). Keep the display away from heating an d/or ai[...]

Installation 16 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 3.4 Connections to the CinemaWall Proceed as follows to connect the Cinem aWall to your video sou rces, external contr oller(s) – if present – and AC power. When connec ting your equipm ent: • Turn off all eq uipment before making any c onnections. • Use th[...]

Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 17 PRE L IMINAR Y RGB and Component Video Connection s : See Figure 3-3 . Figure 3-3. RGB and Component Video Connection s 1. Change th e “COMPONENT/RG B-IN SELECT” setting in the SET UP menu to “COMPONENT” or “RGB” accord ing to the co lor space used b y the source. 2. [...]

Installation 18 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Analog (Computer) RGB Connec tion s : The CinemaWall has an RGB input and a stereo audio in put for conn ecting a pers onal computer; see Figure 3-4 . Figure 3-4. Analog RGB Connection s 1. Refer to Supported Timings on pa ge 62 for a list o f computer signals comp[...]

Installation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 19 PRE L IMINAR Y RS-232 Controller Connection Use a straight-th rough RS-232 c able with a 9- pin male connec tor to conn ect a PC or home theate r control/au tomation syste m (if present) t o the RS-232 por t on the CinemaWall; see Figure 3-5 . For more in formation abou t using t[...]

Installation 20 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Connecting AC Power Plug the female end of the p ower cord into the AC recep tacle on the rear of the CinemaWall. Conn ect the othe r end to you r AC power source. Figure 3-7. AC Power Connection ➤ XP-50 XP-65[...]

CinemaWall XP-50/XP-65 Inst allation/Operation Manual 21 PRE L IMINAR Y 4.1 Turning on the Power 1. Turn on your sour ce compone nts. 2. Press the main power swit ch on the CinemaWall (see Figur e 2-1 or Figur e 2-2 ). The standby/on indica tor lights green. 3. After a brief warm-up period (approximately fi ve seconds), the CinemaWall will display [...]

Operation 22 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 4.4 Setting the Computer Display Propert ies To maximize imag e quality when using the CinemaWall with a persona l computer, you may need to adjust the display properties of your compu ter’s video card . To do this on a Microsoft® Win dows®-based PC: 1. Choose Set[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 23 PRE L IMINAR Y 4.5 Selecting an Input Source To select an in put source, press the INPUT b utton on the remote co ntrol repeat edly. 4.6 Changing the Aspect Ratio To change the aspect ratio (s ize and shape) of the displayed image, press the A S PECT ( ) but ton repeated ly on the r[...]

Operation 24 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Table 4-1. A s pect Ratio S etting s A s pect Ratio S etting (Note) Input Image -> Di s played Image De s cription All A s pect = ON All A s pect = OFF 16:9 16:9 16:9 linearly scales the source active image hori- zontally and vertically to fill a 16:9 screen. With [...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 25 PRE L IMINAR Y 4:3(1) 4:3 4:3 (4:3(1)) linearly scales the source imag e horizon - tally and vertically to fill a 4:3 screen. Side panels are dis - played at the left and right edges of the screen. 4:3(2) – 4:3(2) displays a 16:9 source image in its original aspect ratio and masks[...]

Operation 26 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 4.7 Using Picture-In-Picture (PIP) Use PIP to display a n image from two sources at th e same time in a variety of ways. For more inform ation on setting up PIP and ho w it works, refer to MULTI PIP SETUP on page 43 . Activating PI P To activate PIP, press the MUL TI [...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 27 PRE L IMINAR Y Selecting a PIP Target Screen or Inpu t Source Press S ELECT ( ) to choose a target screen (main or su b) for PIP operations . The audio sign al associated w ith the target screen is heard thr ough the speaker s. Press INPUT ( ) to select an input to display on the ta[...]

Operation 28 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • The OSD menu closes after 60 seconds of inactivity. The CinemaWall O SD menus are a rranged hierarch ically, as shown in Fig ure 4-1. Depending on the selected input source and signal characte ristics, some menu options may not be available. Figure 4-1. O S D Menu[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 29 PRE L IMINAR Y Figur e 4-1. O S D Menu S tructure for Cine maWa ll (conti nued) S ET UP (2/2) MULTI DISPLAY SETUP ( Note: Must se t MULTI PIP SETUP -> DISPLAY MODE to “-” (normal) MULTI DISPLAY SETUP ON/OFF HORIZONTAL SCALE x2, x3, x4 or x5 VERTICAL SCALE x1, x2, x3, x4 or x5[...]

Operation 30 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y PICTURE Use the c ontrols in the PICTURE menu to calibra te your Cinema Wall for optimum picture quality. The CinemaWall has been designed to incorporate se tup and calibrati on standards established b y the Imaging Science Foundat ion (ISF). The ISF has developed c a[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 31 PRE L IMINAR Y PICTURE MENU: The Cinema Wall provides four p icture memorie s per input fo r storing and recalling image quality settings. To stor e settings in a pictur e memory, highlight PICTURE MENU in the PICTURE menu and select STANDARD, ISF DAY, ISF NIGHT or MONITOR. The Cine[...]

Operation 32 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y BRIGHTNE SS : On y our external test p attern source, s elect a PLUGE pattern. (PLUGE is an acronym for “Picture Line-Up Ge neration Equip ment.”) Fig ure 4-3 shows a typical PLUGE pattern. Figure 4-3 . Typical PLUG E Pattern for Adju s ting Brightne ss PLUGE patt[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 33 PRE L IMINAR Y COLOR: On your e xternal test pattern source , select a color bar pattern like the one shown in Figure 4-4 . Figure 4-4. Typical Color Bar Pattern for Adju s ting Color S aturation and Tint Select COLOR fro m the PICTURE me nu. While look ing at the c olor bar pa tter[...]

Operation 34 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y S HARPNE SS : “Sharp ness” is the amount of high-frequen cy detail in the im age. To adjust sharpness, select SHARPNESS from the PICTURE menu. On your externa l test pattern source, sele ct a pattern like the one sh own in Figure 4-5 . Adjust as needed, lo oking f[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 35 PRE L IMINAR Y • GAMMA: The default ga mma setting ( 2.2 ) is corr ect for almo st all signals and conditions. If excess amb ient light washes out the image an d it becomes diffic ult or impossible to see d etails in dark a reas, lower th e gamma setting to compensat e. This will [...]

Operation 36 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y AUTO S ETUP (PC INPUT only): To automatica lly adjust the p osition, size, clock and phase of incoming computer signals for op timum picture qu ality, press or repeatedly to highlight AUTO SETUP in the menu, then press th e ACTION ( ) butto n. H-PO S /V-PO S : Select [...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 37 PRE L IMINAR Y SOUND Use the controls in the SOUND m enu to adjust the CinemaWall audio settings. To return al l SOUND menu se ttings to their fac tory-default values, press RE S ET on the remote con trol unit with the m enu on-scree n. Or, press or repeatedly to high light RESET in[...]

Operation 38 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y SET UP Use the contro ls in the SET UP menu to perform a dvanced imag e quality adjustme nts and access various ot her CinemaW all features. S IGNAL: Select SIGNAL from the SET UP m enu to display info rmation about th e current signal and to adjust the following sett[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 39 PRE L IMINAR Y • XGA MODE (INPUT3/PC INPUT only): You can force the Cine maWall to use a specific output re solution with RGB PC sources. To do this select XGA MODE from the SIGNAL menu and set it to 1024x76 8, 1280x768 or 1366x76 8. • NOI S E REDUCTION: To apply noise reduction[...]

Operation 40 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • S TART TIME/ S HOW DURATION: Wh en the screen saver MODE is TIME OF DAY, set START TIME to the time of da y that yo u want the screen saver to a ctivate. When the screen sa ver MODE is INTERVAL, set SHOW DURATION to the “normal presentatio n” interval (no sc r[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 41 PRE L IMINAR Y POWER S AVE: Select POWER SAVE from the SET UP menu and set it to ON to reduce the overall image intensity by a sm all amount, there by reducing po wer consumption. S TANDBY S AVE: Select STANDBY SAVE from the SET UP menu and set it to ON to minimize powe r consumptio[...]

Operation 42 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • S EAM HIDE S VIDEO: Select SEAM HIDES VIDEO from the MULTI DISPLAY SETUP menu and set it to ON when d isplaying moving im ages on a video wall. SEAM HIDES VIDEO joins the ed ges of adjac ent displays in a v ideo wall together in such a way as to compen sate for th[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 43 PRE L IMINAR Y MULTI PIP S ETUP: The CinemaW all can display an image fro m two sources at th e same time in a variety of ways. T o set up this featur e, select MULTI PIP SETUP from the SET UP menu and pre ss the ACTION ( ) button. • MULTI PIP: Select one of th e following to def [...]

Operation 44 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • TRAN S PARENCY / TRAN S PARENCY LEVEL: If you are using the Blend PIP fe ature, you can make the overlay (sub) image t ransparent so tha t the main (backgrou nd) image shows through. To do this, select TRANSPARE NCY from the MULTI PIP SETU P menu and set it to ON.[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 45 PRE L IMINAR Y PORTRAIT S ETUP: You can create a video wall consisting of three (3x1) Cin emaWall displays in “portrait” mode and display an en larged image across all of them. To do this, select PORTRAIT SETUP from the SET UP menu and press the ACTION ( ) button. The n, configu[...]

Operation 46 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y OPTIONS Use the controls in the OPTIONS menu to set up the Weekly Co mmand Timer and perform oth er advan ced, install ation-relat ed tasks. To access the OPTION S menu: 1. Press S ET UP . 2. Press or repeatedly until OSD LANGUAGE is highlighted. 3. Press and hold the[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 47 PRE L IMINAR Y Weekly Command Timer: You can program the Cine maWall to perfo rm a series of actions at spe cific times of the day and days o f the week. To do this, you cr eate command sequ ences or “p rograms” consisting of a series of up to 64 individu al commands. You can cr[...]

Operation 48 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y • Program Edit: To edit the seven timer program s, press or repeatedly t o highli ght Program Edit an d press the ACTION ( ) button. Then, proce ed as follows: a Program: Press or to select a program to edi t. b To define the first comma nd in the program, pre ss to[...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 49 PRE L IMINAR Y Initial VOL level: Select Initial VOL level from the OPTIONS menu to s et the desired sound volume leve l upon power-up . Press or to set it to On, then use the VOL- or VOL+ ( ) button to set the desired initial volume level. W hen you do, the volume chang es so you c[...]

Operation 50 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Initial Power Mode: Select Init ial Power Mode fr om the OPTION S menu to contr ol how the CinemaWall re covers from a po wer interruption (res ulting either from a power failure o r from being u nplugged, t hen plugged back in): • Normal: The CinemaWall returns to [...]

Operation CinemaWall XP-50/XP-65 Inst allation/Operation Manual 51 PRE L IMINAR Y Power On S creen Delay: In a large video wall in stallation, it may be advisab le to turn the displays on one at a time rathe r than all at o nce, so as not to overload th e power source . To make this easier, y ou can set the CinemaWall to wait up to 30 seconds after[...]

Operation 52 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

CinemaWall XP-50/XP-65 Inst allation/Operation Manual 53 PRE L IMINAR Y 5.1 Cleaning Regular cleaning w ill extend the life and perfo rmance of the CinemaWall. Befo re cleaning, be sure to u nplug the po wer cord fro m the powe r outlet. Cleaning the Display Panel Body and Rem ote Control Do not under any circumstanc es use solvents s uch as ben ze[...]

Maintenance and Troublesh ooting 54 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 5.2 Troubleshooting Tips Table 5-1 provide s some general guidelines for troubleshooting pr oblems you may encounter with the CinemaWall. If the suggested solutions fail to resolve th e problem or if you encounter an issue not d escribed here, p[...]

CinemaWall XP-50/XP-65 Inst allation/Operation Manual 55 PRE L IMINAR Y 6.1 RS-232 Connection and Port Configuration To interface the CinemaWall with a home th eater automation/control system or a PC running terminal emulation soft ware, connect it to your control system or PC as shown in Figure 3-5 . U s e a s traight-thr ough cable . Configure th[...]

Serial Communications 56 CinemaWall XP-50/XP-65 Inst allation/Operation Manual P RELI M INARY Table 6-1 lists th e CinemaWall serial command set. Table 6-1. S erial Command s A S CII Hex De s cription AAC:MENCLR 41 41 43 3A 4D 45 4E 43 4C 52 Audio Menu (Clear) AAC:MENDYN 41 41 43 3A 4D 45 4E 44 59 4E Audio Menu (Dynamic) AAC:MENSTD 41 41 43 3A 4D 4[...]

Serial Communications CinemaWall XP-50/XP-65 Inst allation/Operation Manual 57 PRE L IMINAR Y DWA:OVLON 44 57 4 1 3A 4F 56 4C 4F 4E Advan ced PIP mode (ON) DWA:PIN 0 44 57 41 3A 50 49 4E 30 The location of th e sub picture (lower right) DWA:PIN 1 44 57 41 3A 50 49 4E 31 The location of th e sub picture (lower left) DWA:PIN 2 44 57 41 3A 50 49 4E 32[...]

Serial Communications 58 CinemaWall XP-50/XP-65 Inst allation/Operation Manual P RELI M INARY OSP:SCR0 4F 53 50 3A 53 43 52 30 Screen Saver SCROLLING BAR ONLY (OFF) OSP:SCR1 4F 53 50 3A 53 43 52 31 Screen Saver SCROLLING BAR ONLY (ON) POF 50 4F 46 Power OFF PON 50 4F 4E Power ON SSC:FNC0 53 53 43 3A 46 4E 43 30 Screen Saver func ti on (SCROLLING BA[...]

CinemaWall XP-50/XP-65 Inst allation/Operation Manual 59 PRE L IMINAR Y 7.1 CinemaWall Specifications Table 7-1 lists the CinemaW all specificat ions. 7. S pecification s Table 7-1. CinemaWall S pecification s Native Re s olution: 1920 x 1080 S creen S ize: XP-50: 43.50 in. W x 24.50 in. H (1106.0 x 622.0 mm) 50 in. (1270.0 mm) diagonal XP-65: 56.5[...]

Specifications 60 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 7.2 CinemaWall Dimensions Figure 7-1 and Figure 7-2 sho w the CinemaWall dimensio ns (all dimensions are in inches). Figure 7-1. CinemaWall Model XP-50 Dimen s ion s (with Optional Table S tand) 50.26 29.98 15.50 5.07 4.06 6.88 0 1.75 1.17 8.48 21.08 29.57 25.98 [...]

Specifications CinemaWall XP-50/XP-65 Inst allation/Operation Manual 61 PRE L IMINAR Y Figure 7-2. CinemaWall Model XP-65 Dimen s ion s (with Optional Table S tand) 0 7.81 12.31 1.98 2.35 3.69 62.45 54.64 50.14 0 2.83 37.69 1.34 IR RECEIVER & LED INDICA TOR 1.26 2.49 all around 66.13 17.00 0 .55 61.90 62.45 10.09 2.07 4.07 6.02 0 2.83 33.86 37.[...]

Specifications 62 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y 7.3 Supported Timings Table 7-2 lists the signal types supported by each input on the Cinema Wall. Table 7-2. S upported S ignal Timin g s by Input Format Re s olution Refre s h Rate (Hz) Horizontal Frequency (kHz) Pixel Frequency (MHz) S upported? ( √ = Ye s ,[...]

Specifications CinemaWall XP-50/XP-65 Inst allation/Operation Manual 63 PRE L IMINAR Y 480/60i 720x487 59.94 15.734 13.500 √ – √ 480/60p 720x483 59.94 31.469 27.00 0 √ √ √ 576/50i 720x576 50.00 15.625 14.750 √ – √ 576/50p 720x576 50.00 31.250 29.00 0 √ √ √ 720/50p 1280x 720 50.00 37.500 75.250 √ √ √ 720/60p 1280x 720 6[...]

Specifications 64 CinemaWall XP-50/XP-65 Inst allation/Operation Manual PRE L IMINAR Y Note s :[...]

CinemaWall XP-50/XP-65 Inst a llation/Operation Manual A-1 PRE L IMINAR Y Table A-1 lists th e CinemaWall fact ory-default imag e settings. All of t hese setting s are in the PICTURE menu except for 1:1 PIXEL MODE , which is in the POS./SIZE men u. Appendix A. Default S etting s Table A-1. Runco Factory Default S etting s for CinemaWall Menu S etti[...]

Default Settings A-2 CinemaWall XP-50/XP-65 In stallation/Operation Manual PRE L IMINAR Y Note s :[...]

[...]

Runco International • (800) 23RUNCO • Fax (503) 748-8161 • www.runco.com SERIAL NUMBER 020-0970- 00 Rev. B March 2009[...]