Sakar DVR 650 Bedienungsanleitung

DVR 650 Di gital Video Camera User Manual © 20 10 Sakar Inter national, Inc. All righ ts reserv ed. Windows and the Windows logo ar e registered trade marks of Micros oft Corpor ation. All other trade marks are the property of their re spective comp anies.[...]

1 Content s Introduction .................................................................................................................................. 2 W hat Y our Camera Includes ......................................................................................................... 2 Parts of the Camera ....................................[...]

2 Introduction Thank you for purchasing this camera. Every thing you need to take quality digital photos and videos is included with your camera. Vivitar makes capturing those special moments as easy as possible. Note: Your camera has 128MB of internal memory. In order to expand the memory capacity to capture more images insert an SD Memory card (u[...]

3 Parts of the Camera 1. Power button 2. Shutter button 3. T / Zoom In button 4. W / Zoom Out button 5. MODE button 6. SET button 7. Scene / Left button 8. Slideshow / Up button 9. Delete / Right button 10. ViviLink / Down button 11. LCD Screen 12. Lens 13. Battery Compartme nt 14. Memory Card Slot 15. USB/AV Slot 16. W rist Strap connect or 17. Mi[...]

4 Initial Camera Set up Installing the Batteries Installing the Memory Card Turning On the Camera Using the Camera Selecting the modes Accessing the menu SD M emory card (up to 32GB) - for additional camera memory[...]

5 Main Camera Modes Your camera has different modes for the various camera functions. You can switch modes by pressing the MODE (M) button on your camera after the camera has been powered ON. Video Capture Mode Use this mode to capture videos with your digital camer a. This is the default mode when the camera is pow ered ON. To take a video, aim yo[...]

6 Camera Techn ical Specificatio ns Image Sensor CMOS Sensor Image Resolution (5M) 2592 x 1944 pixels, (3M) 2048 x 1536 pixels, (2M) 1600 x 1200 pix els, (2M HD) 1920 x 1080 pixels and (VGA) 640 x 480 pixels Video Resolution 640X480 pixels (30 fps), 320X240 pixels (30 fps) File Format JPEG/AVI Internal Memory 128 MB External Memory SD Card (up to 3[...]

7 Computer Sy stem Requirements – Windo w s To be able to download photos and videos to y our PC, you will need the following minimum configuration:  Pentium 4 processor or above with W indows X P service pack 2, W indows Vista or W indows 7  512 MB RAM, with 100MB of free disk space  1024 x 768 Recommended screen resolution  16 -bit [...]

8 Using Your Digita l Camera  Make sure the batteries have been inserted properly into your digital camera.  If your camera comes with a rechargeable lithium battery, make sur e it is fully charged before the first use.  Make sure an SD card has been inserted into your camera if you would like to expand your camera memory capacity beyond t[...]

9 W hen t he camera is first powered ON, the Video Capture Mode will be active. The icons that appear on the LCD screen are the best default settings so that y ou can begin to capture and enjoy clear quality videos and photos. To change the active camera mode, make sure the camera is powered ON and press the MODE (M) button . When in Video Capture [...]

10 Video Capture Mode The Video Capture Mode allows you to capture videos w ith your digital camera. W hen the camera is first powered ON, the camera will be in Video Capture Mode. T aking a Video 1) W hile in Video Capture Mode use the LCD display to direct the camera at the scene you would like to capture. 2) Click the T/Zoom In and W/Zoom Out bu[...]

11 Video Capture Mode Menus The following are the menus that appear in your camera‟s Video Ca pture Mode: Scene Menu The Sc ene Menu allows y ou to choose scene settings that allow your ca mera t o a dapt pro perly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction con[...]

12 5) A selected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to y our previous mode. 8) An icon reflecting your selection will display on the L CD screen. 9) Remember that this setting will be saved by your camera until you manuall[...]

13 5) A selected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to y our previous mode. 8) An icon reflecting your selection will display on the LCD screen. 9) Remember that this setting will be saved by your camera until you manually[...]

14 5) A selected option icon will appear on the selected item. 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to y our previou s mode. 8) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settin[...]

15 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to scroll through the menu options. 4) Press the SET button to select the desired option. 5) A se lected option icon will appear on the select[...]

16 Audio Menu The Audio menu allows you to control the camera‟s ability to record audio in the video clips recorded with your camera in addition to the v ideo record. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN di[...]

17 Frequenc y Menu The options in the Frequency menu represent the frequency of the electrical current in fluorescent lighting sources in your locale. If your camera is set to a frequency that does not match your country‟s electric curren t, you may see flickering or waves on the images taken by your camera. 50Hz – UK, Europe and Australia 60Hz[...]

18 4) If you would like to proceed with the format, select “Y es” and press the SET button. 5) You will be asked to confirm your wish to format your memory card. 6) Select “No” to exit without formatting. 7) Select “Yes” and press the SET button to begin the format. 8) The memory card will be completely formatted. Firmware Sett ings Men[...]

19 Press the Shutter button again to pause the video and continue playing and pausing as needed. W hile the Video is playing all the icons on the top section of the L CD disappear. To fully stop the video and restore the icons to the LCD, press the UP button on the Direction Controls. Thumbnail View Use the W/Zoom Out button to display the images o[...]

20 Video Playback Mode Menus The following are the menu s that appear in your camera‟s Video Playback Mode: V iviLink Menu The Viv iLink technology allows you to q uickly and e asily u pload your cam era‟s photos and videos to the so cial n etworks of y our choice with the accompanying Vivitar Experience Image Man ager – W almart Edition appl[...]

21 Protect/Lock Menu Pictures and Videos taken with your camera can be protected or “locked” to prevent any deletion or alteration being made to the files. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction c[...]

22 Photo Cap ture Mode The Photo Capture mode allows you to capture pictures with y our digital camera. T aking a Picture 1) W hile in Ph oto Capture mode, use the LCD display to direct the camera at the scene y ou would like to capture. 2) Click the T/Zoom In and W/Zoom Out buttons to zoom in/out if desired. Note: The actual shape of these buttons[...]

23 Photo Capture M ode Menus The following are the menus that appear in your camera‟s Photo Ca pture Mode:[...]

24 Scene Menu The Sc ene Menu allows you to c h oose sce ne settings th at allow y our camera t o adapt properly to your current environment. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to [...]

25 Image Quality Menu The Image Quality menu allows you to select the desired qua lity le vel of the images taken b y your camera. Keep in mind that images with a higher image quality lev el will also take up more memory on your camera. 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control butt[...]

26 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. White Balance Menu The White Balance feature allows your camera to adjust the coloring of the captured images depending on the type of light source in the current envir onment. Properly adjusting th[...]

27 8) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Multi Snapshot s Menu W hen enabl ed, the Multi Snapshots feature allows you to take five rapid snapshots in a row with a single click of the shutter button. This feature can be effective w hen tryi[...]

28 8) An icon reflecting your selection will display on t he LCD screen 9) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Light Exposure Menu The Light Exposure setting he lps you control the amount of lig ht that enters your camera‟s lens. This set[...]

29 6) Press the LEFT or RIGHT button to select the next menu item. 7) Press the MODE button to exit the menu and return to your previous mode. 8) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Silent Mode Menu You have the o ption of activating the ca[...]

30 7) Press the MODE button to exit the menu and return to y our previous mode. 8) Remember that this setting will be saved by your camera until you manually change the setting or restore the camera‟s default factory settings. Frequenc y Menu The options in the Frequency menu represent the frequency of the electrical curren t in fluorescent light[...]

31 1) Press the SET button to open the menus for the current mode. 2) Press the LEFT or RIGHT direction control buttons to scroll and select the chosen menu. 3) Press the UP or DOWN direction control buttons to highlight the menu options. While scrolling down the selected option will be highlighted. 4) If you would like to proceed with the format, [...]

32 Photo Play back Mode W hen y ou first turn on the camera, the camera will be in Video Cap ture mode by default. Press the MODE button twice to open the Playback Mode. The playback mode w ill allow you to review and edit photos and videos that you‟ve already taken with you camera. Viewing Photos on Y our Ca mera Once in the Playback mode, press[...]

33 Photo Pla yback Mode Quick Func tion Buttons Your digital camera has a four-directional pad that functions as Quick Function buttons. Button A ction Lef t Displays the PREVIOUS ima ge Up Views all the Photos as a Slide Show with 3, 5 or 10 second intervals Right 1. Displays the NEXT image 2. DELETE : Holding the button down for 3 seconds opens t[...]

34 4) Press the SET button to select the desired option. 5) A selected option icon will appear on the selected item. 6) An icon will appear on the image with the selected ViviLink destination site when you return to the Playback display. 7) Changing the ViviLink destination site will also make the selected site the n ew default ViviLink option. A n[...]

35 5) To delete this one photo, select “Delete This Photo” 6) To delete all unlocked photos on your camera‟s memory card, select “Delete All Photos” . 7) Press the SET button to select the desired op tion. 8) You will be asked to confirm your selection. 9) The photos will be deleted as desired. 10) Remember: The Delete menu can also be ac[...]

36 blank. Use the camera as you w o uld to capture and play back photos and v ideos. The imag es will appear on the TV instead of on the L CD screen. Note: The only limitation of using the TV screen is that the camera is now not portable. 1) Connect the camera to a TV with the TV cable (supplied). Connect the black jack into the camera ‟s AV slot[...]

37 Installing the Soft ware You must be connected to the internet to install and run the Vivitar Experien ce Image Manager – Walmart Edition software. 1) Insert the installation CD into your CD- RO M drive. The installation screen shou ld automatically open. 2) On PC: The V ivitar Experience Image Manag er – W almart Edition Installer w indow a[...]

38 Note: If you do not have internet access, you can still download media from the camera. Click the “How to transfer photos and videos from my camera to my computer” button for instructions. 5) If you have internet access, select your camera model from the list a nd click “Next” to open the next window. 6) Click “Next” to confirm your [...]

39 Getting Photos and Videos fro m y our Camera to Your Comp uter An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so will cancel the transfer of any files on their w ay to your computer. 1) Select the “Get Images” button from the Main menu. 2) The “Get Images from device” window opens. 3) You can select t[...]

40 Get started! Using the Vivitar Experience Image Manager – Walmart Edition, you can:  Upload an d manage photos and videos to and f rom the most popular p hoto s haring and social networking sites – Walmart Photo Center, Photobucket, Facebook, Flickr, MySpace, Picasa, Twitpic, Twitgoo and YouTube  Seamlessly transfer photos and videos f[...]

41 Transfer media f rom my camera to my computer manually (Using Macintosh) 1) Use the USB cable that came with your camera to connect your camera to your c omputer. 2) MSDC appears on the LCD. 3) The camera‟s device icon appears on the desktop. 4) Click on the device icon and open the DCIM folder and the folder inside to v iew the media files. 5[...]

42 Sakar Warranty Car d This warranty covers for the original consumer purchaser only and is not transferable. Products that fail to function properly UNDER NORMAL USAGE, due to defects in mate rial or workmanship w ill be repaired at no c harge f or parts or lab or for a pe riod of o ne y ear from th e time of purchase. What Is Not Covered By Warr[...]

43 Technical Sup port For technical support issues please v isit our w ebsite at www .vivitar.com . You can find manuals, software and FAQ‟s at the website. Can‟t find w hat you ar e looking for? E -mail us at support@vivitar.com and one of our technical support team members w ill answer your questions. For phone support in th e US p lease call[...]

10. You have finished setting up your monitor. Execute X-Window after setting other re- quested hardware. IRTOUCH IRTouch Screen Control Panel Double click the mark as shown below on the desktop or follow "Start" -> "All programs" -> "IRTouchSystems", and then click "IR TouchScreen Control Panel" and go[...]

2. Select the touchscreen you want in the list and Click [Calibrate]. After calibration, the item "Calibrated" will show "Yes". The method of calibration comprises the following steps: Select a touchscreen in the infor- mation list, and then click the “Calibrate” button when the calibration window shows up. At this time, fou[...]

[...]

You can enable the right-click function (default). Click and press on any area on the screen for two seconds. The right-click pop-up menu will show up. Right-click is only available in the Mouse Emulation mode. You can adjust the value of “Delay” in “Right Click Settings”. Note: The higher the “Delay” value, the longer the right-click m[...]

2. Click [Change Port] and change the settings of the selected Serial Port. Attachment General settings for touchscreen Select "Mouse Emulation" mode to find the available options in Options: "Enable Touch," "Send Right Click" and "Enable Double Click". If you select the "Enable Delay Touch" option,[...]

Instructions for the settings: 1. Send Right Click : You can enable the right-click function (default). Click and press on any area on the screen for two seconds. The right-click menu will pop up. Right-click is only� available in Mouse Emulation mode.� In general, the “Delay” value is set to 1000 (1 second) and the “Area” value is set [...]

Specifications 1. Define each value in “Delay Touch Settings” after selecting to activate “Enable Delay Touch”. It is recommended that "Delay" is set between 40 and 50 and "Area" to 2. Note The touch response can be obtained after activating the "False touch rejection" function. MDC (Multi-Display Channel) Inst[...]

Note If the popup window to install the software for the main screen is not displayed, proceed with the installation using the MDC executable file on the CD. 3. When the Installation Shield Wizard window appears, click "Next". 4. Select "I agree to the terms of the license agreement" to accept the terms of use. 5. Click "In[...]

Introduction A Multiple Display Control (MDC) is an application allowi ng various displays to be easi ly and simultaneously operated on a PC. RS-232C, a standard of serial communi cation, is used for the comm unication between a PC and a display. Therefore, a serial cable sh ould be connected between the serial port on a PC and the serial port on a[...]

Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control T ools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote cont rol signal receiving fu ncti on of the display unit. 3. Set the Safety Lock function. When setting the Lock function, you can only operate power a[...]

1. The Multiple Display Control is originally set to CO M1. 2. If any port other than COM1 is used, COM1 throug h COM4 c an be selected in the Port Selection Menu. 3. If the exact port name that is co nnected to the LCD Display using a serial c able is not selected, co mmunication will be unavailable. 4. The selected port is stored in the program a[...]

Info Grid shows some basic information necessary to Power Control. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All bu tton or Check Box to cho ose a display to contr ol.[...]

Power Control al lows controll ing some of the functions of the se lected display. 1) Power On/Off - Turns th e power of the selected display O n/Off. 2) Volume - Contro ls the volume level o f the selected disp lay. It receives the volume value of the selected displa y from the sets and displays it in the slider. (When you cancel the selection or [...]

• PC Mode[...]

Info Grid shows some basic information necessary to Input Source Control. 1) PC - Change s the Input Source of the selected display to PC. 2) BNC - Change s the Input Source of the selected display to BNC. 3) DVI - Change s the Input Source of the selected display to DVI. 4) TV -C h a n g es the Input Source of the selected display to TV. 5) DTV -C[...]

The Input Source Control feature is available on ly fo r the displays whose power s tatus is ON. Image Size PC, BNC, DVI 1. Click Image Size of the main icons and the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control . 1) ( Power Status) - Shows the power status of the current display. 2) Imag[...]

Image Size TV, AV, S-Video, Component, DVI(HDCP), HDMI, DTV 1. Click Image Size of the main icons an d the Image Size control screen appears. Info Grid shows some basic information necessary to Image Size Control . 1) Click the Video Source tab to adjust Image Size for TV, AV, S-Vide o, Component, DVI (HD CP), HDMI, DTV. Click Select All or use Che[...]

[...]

PIP Size 1. Click PIP of the main icons and the P IP control screen appears. Click Select All or use Check Box to select a display to control. Info Grid shows some basic information necessary to PIP Size Control. 1) PIP Size - Shows the current PIP Size of the display in use. 2) OFF - Turns o ff the PIP of the selecte d display. 3) Large - Turns on[...]

PIP PIP Source 1. Click PIP of the main icons and the P IP control screen appears. Info Grid shows some basic information necessary to PIP Source Control. 1) PIP Source - PIP Source can be controlled wi th turning on the LCD Display power. 2) PC - Changes the source of the PIP of the selected display to PC. 3) BNC - Changes the source of the PIP of[...]

Settings Picture 1. Click Settings of the main icons an d the Settings Control screen appears. Info Grid shows some basi c information necessary to Setti ngs Control. When each func tion is select ed, the set value of the selected function is displayed in the slide.When selected, each function fetches the value for the set and displays it on the sl[...]

-A d j usts the Color Tone for the selected display. 8) Color Temp -A d j usts the Color Temp for the selected display. 9) Brightness Sensor -A d j usts the Bri g htness Sensor for the selected display. 10) Dynamic Contrast -A d j usts the Dynamic Contr ast for the selected display. The Input source of MagicInfo wo rks only on MagicInfo model. Colo[...]

2) Contrast -A d j usts Contrast of the selected display. 3) Brightness -A d j usts Bri g htness for the selected display. 4) Red -A d j usts red Color o f the selected d isplay. - Av ailable only for NT . 5) Green -A d j usts g reen Color of the selected d isplay. - Av ailable only for NT . 6) Blue -A d j usts blue Color of the selected display. -[...]

Info Grid shows some basic information necessary to Setting s Contr ol. When each function is selected, the set value of the selected function is displayed in the slide. When selected, each func tion fetches the value for the set and displays it on the slide bar. When "Select All" is ch osen, the default value i s displayed. Changing a va[...]

Image Lock 1. Click Settings of the main icons an d the Settings Control screen appears. Info Grid shows some basi c information necessary to Setti ngs Control. 1) Image Lock - Avail able only for PC, BNC. 2) Coarse - Adjusts Coarse of the selected display. 3) Fine - Adjusts Fine of the selected display. 4) Position - Adjusts Position of the select[...]

An "Info Grid" showing several basic data items appears. 1) Maintenance - Allows the Maintenance Control function for all input sou rces. 2) Auto Lamp Control - Automatically adjusts the backlight of the selected display at a specified time. The Manual Lamp Control automatically turns off if you ad j ust usin g the Auto Lamp Control. 3) M[...]

1) Scroll - This function is used to remove the after images that occur when a still screen is displayed on th e selected display for a long time. 2) Pixel Shif t - This allows the screen to be moved finely at the specified time interval. 3) Safety Screen - The Safety Screen function is used to prevent afterimages from occurring when a still sc ree[...]

1. Click on the "Mainten ance" icon in the Ma in Icon column to display the Maintenanc e screen. 1) Video Wall - A Video Wall is a se t of video screens that are conne cted together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall (Screen divider) - The screen can[...]

[...]

2. Selected one display: Fetche s and displays the settings value for the selec ted display. 3. Selected one display (ID1) and add another display (ID3): The program, which was displ aying the settin gs value of ID 1, fetches and displays the value of ID3. 4. Selected all sets using Select Al l: Returns to the Factory Default Value.[...]

Adjusting the LCD Display Input Available Modes • PC / DVI • AV • Component • HDMI • MagicInfo Source List MENU → ENTER → → ENTER → → , → ENTER Use to select PC , DVI or other external input sources connected to the LCD Display. Use to select the screen of your choice. 1. PC 2. DVI 3. AV 4. Component 5. HDMI 6. MagicInfo PIP N[...]

Note • If you select , , in Size , Position and Transparency will not be activated. PIP MENU → ENTER → → → ENTER → → ENTER → → , → ENTER Turns the PIP Screen Off / On . • Off • On Source MENU → ENTER → → → ENTER → → → ENTER → → , → ENTER Selects the input source for the PIP. • PC : DVI / AV / HDMI • D[...]

[...]

→ , → ENTER Adjusts the Transparency of PIP windows. • High • Medium • Low • Opaque Note • PIP turns off when the LCD Display is switched to an external source. • For PC and DVI , this is deactivated if the cable is disconnected. Edit Name MENU → ENTER → → ENTER → → → → , → ENTER Name the input device connected to th[...]

Picture [ PC / DVI / MagicInfo Mode] Available Modes • PC / DVI • AV • Component • HDMI • MagicInfo MagicBright MENU → → ENTER → → ENTER → → , → ENTER MagicBright is a feature providing the optimum viewing environment depending on the con- tents of the image you are watching. Currently four different modes are available: Ent[...]

Custom By using the on-screen menus, the contrast and brightness can be changed to your personal preference. MENU → → ENTER → → → ENTER → (Not available when Dynamic Contrast is set to On .) Note By adjusting the picture using the Custom function, MagicBright will change to Custom mode. Contrast MENU → → ENTER → → → ENTER → [...]

[...]

→ , → ENTER Color Temp. MENU → → ENTER → → → → → → ENTER → → , → ENTER Color Temp. is a measure of the 'warmth' of the image colors. (Not available when Dynamic Contrast is set to On .) Note This function is only enabled if the Color Tone is set to Off . Image Lock Image Lock is used to fine-tune and get the best[...]

→ , , , → ENTER Adjusts the screen location horizontally and vertically. Auto Adjustment MENU → → ENTER → → → → → → → → ENTER → The values of Fine , Coarse , Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. (Available in PC mode only) Signal Balance This [...]

Signal Control MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → 1. R-Gain MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → → ENTER → → , → ENTER 2. G-Gain MENU → → ENTER → → → → → → → → → ENTER → → ENTER → → → → ENTER → → , → ENTER 3.[...]

→ , → ENTER Size MENU → → ENTER → → → → → → → → → → ENTER → → , → ENTER The Size can be switched. 1. 16:9 2. 4:3 HDMI Black Level MENU → → ENTER → → → → → → → → ENTER → → , → ENTER When watching with a DVD or set-top box connecting to the product via HDMI or DVI, image quality deterioratio[...]

→ , → ENTER Adjusts the PIP Screen Settings. Note • Available Modes: PIP ON 1. Contrast MENU → → ENTER → → → → → → → → → → → ENTER → → ENTER → → , → ENTER Adjusts the Contrast of the PIP window on the screen. 2. Brightness MENU → → ENTER → → → → → → → → → → → ENTER → → → ENTE[...]

→ , → ENTER Adds a natural tone to the PIP window. Note Enabled only when the PIP input is selected in AV , HDMI or Component mode. Operates only if the video signal is NTSC. Dynamic Contrast MENU → → ENTER → → → → → → → → → → → → ENTER → → , → ENTER Dynamic Contrast automatically detects the distribution of th[...]

→ , → ENTER Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts to create optimum brightness. 1. Off 2. On Picture [ AV / HDMI / Component Mode] Available Modes • PC / DVI • AV • Component • HDMI • MagicInfo Mode MENU → → ENTER → → ENTER → → , → ENTER The LCD Display has four au[...]

Contrast MENU → → ENTER → → → ENTER → → ENTER → → , → ENTER Adjusts the Contrast. Brightness MENU → → ENTER → → → ENTER → → → ENTER → → , → ENTER Adjusts the Brightness. Sharpness MENU → → ENTER → → → ENTER → → → → ENTER → → , → ENTER Adjusts the picture Sharpness. Color MENU → →[...]

→ , → ENTER The color tones can be changed. The individual Color components are also user adjustable. (Not available when Dynamic Contrast is set to On .) 1. Off 2. Cool2 3. Cool1 4. Normal 5. Warm1 6. Warm2 Note If you set the Color Tone to Cool2 , Cool1 , Normal , Warm1 , or Warm2 , the Color Temp. func- tion is disabled. Color Temp. MENU →[...]

→ , → ENTER The Size can be switched. 1. 16:9 : Sets the picture to 16:9 wide mode. 2. Zoom 1 : Magnifies the size of the picture on the screen. 3. Zoom 2 : Magnifies the size of the picture more than Zoom 1 . 4. 4:3 : Sets the picture to 4:3 normal mode. 5. Screen Fit : Displays the input scenes as they are without any cutoff when HDMI 720p, 1[...]

[...]

Note • Available Modes: PIP ON 1. Contrast MENU → → ENTER → → → → → → → → → → ENTER → → ENTER → → , → ENTER Adjusts the Contrast of the PIP window on the screen. 2. Brightness MENU → → ENTER → → → → → → → → → → ENTER → → → ENTER → → , → ENTER Adjusts the Brightness of the PIP w[...]

→ , → ENTER Adds a natural tone to the PIP window. Note Enabled only when the PIP input is selected in AV , HDMI or Component mode. Operates only if the video signal is NTSC. Dynamic Contrast MENU → → ENTER → → → → → → → → → → → ENTER → → , → ENTER Dynamic Contrast automatically detects the distribution of the vi[...]

Brightness Sensor automatically detects distribution of the inputted visual signal and adjusts to create optimum brightness. 1. Off 2. On Sound Available Modes • PC / DVI • AV • Component • HDMI • MagicInfo Mode MENU → → → ENTER → → ENTER → → , → ENTER The LCD Display has a built-in high fidelity stereo amplifier. 1. Stand[...]

MENU → → → ENTER → → → ENTER → Note • You can hear the sound even when sound value is set to 0. • If you adjust sound using Custom function, Mode will turn to Custom mode. Bass MENU → → → ENTER → → → ENTER → → ENTER → → , → ENTER Emphasizes low frequency audio. Treble MENU → → → ENTER → → → ENTER [...]

2. On SRS TS XT MENU → → → ENTER → → → → → ENTER → → , → ENTER SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television spea[...]

→ , → ENTER When you use the product with it connecting to a Home theater, turn the Internal speakers off so you can listen to sound from the Home theater's (external) speakers. 1. Internal Sound is outputted both from the Internal speaker and the External speakers, but the volume control is only available from the Internal speaker. 2. Ext[...]

Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set , Sleep Timer , On Timer , and Off Timer . MENU → → → → ENTER → → → ENTER → Clock Set MENU → → → → ENTER → → → ENTER → → ENTER → → , → , [...]

7. 180 On Timer MENU → → → → ENTER → → → ENTER → → → → ENTER → → , / , → ENTER Turns the LCD Display on automatically at a preset time. Controls the mode and the volume level at the time the LCD Display turns on automatically. Off Timer MENU → → → → ENTER → → → ENTER → → → → → ENTER → → , / , [...]

3. Low 4. Opaque Safety Lock Change PIN MENU → → → → ENTER → → → → → ENTER → → EN- TER → → [0 ∼ 9] → [0 ∼ 9] → [0 ∼ 9] → [0 ∼ 9] The password can be changed. Note The preset password for the LCD Display is "0000". Lock On MENU → → → → ENTER → → → → → ENTER → → → ENTER → →[...]

This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the whole picture or where the same picture is repeated on each screen. When the Video Wall is on, you can adjust the Video Wall screen setting. MENU ?[...]

1. Full Provides a full screen without any margins. 2. Natural Displays a natural image with the original aspect ratio intact. Horizontal MENU → → → → ENTER → → → → → → → → ENTER → → → → ENTER → → , → ENTER Sets how many parts the screen should be divided horizontally. Five adjustment levels: 1, 2, 3, 4, and 5.[...]

The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Divider. • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. Safety Screen The Safety Screen function is used to prevent afterimages [...]

[...]

Mode MENU → → → → ENTER → → → → → → → → → ENTER → → → ENTER → → → ENTER → → , → ENTER You can change the Safety Screen Type. 1. Scroll 2. Bar 3. Eraser Period MENU → → → → ENTER → → → → → → → → → ENTER → → → ENTER → → → → ENTER → → , → ENTER Use this function [...]

Scroll MENU → → → → ENTER → → → → → → → → → ENTER → → → → ENTER → This function helps to remove after-images on the screen by moving all the pixels on the LCD according to a pattern. Use this function when there are remaining after-images or symbols on the screen, especially when you displayed a still image on th[...]

[...]

[...]

→ , → ENTER Note Available in PC mode only Note The Reset function is not available when Video Wall is On . Color Reset MENU → → → → ENTER → → → → → → → → → → → → → ENTER → → → ENTER → → , → ENTER Multi Control Available Modes • PC / DVI • AV • Component • HDMI • MagicInfo Multi Control As[...]

→ , → [0~9] • ID Setup Assigns distinctive IDs to the SET. • ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. MagicInfo Available Modes • PC / DVI • AV • Component • HDMI • MagicInfo Note • The remote control can be used to s[...]

• In the OSD image of MagicInfo , Network mode is the same as Device. • When using MagicInfo with the MagicInfo Server Program: perform Network mode. • When using MagicInfo with the device directly connected to LCD Display : execute Device mode. • Press ESC to directly go to the MagicInfo Window screen. • To setup MagicInfo on a Windows s[...]

In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation. 3. Select Language - step 3 When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 Adjusting the LCD Displ[...]

You can select which rotation type will be applied to your device. 5. Setup Information Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear. Adjusting the LCD Display 91[...]

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display. The f[...]

• Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. (They may cause flaws or deformation of the screen surface.) • The user is responsible for any damage caused by using these substances. Symptoms and Rec[...]

A: Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and th[...]

Q: The screen color is inconsistent. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color image is distorted by dark shadows. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The color white is poor. A: Adjust color using Custom under OSD Color Adjustment menu. Q: The Power Indicator blinks. A: The LCD Display [...]

A: Check if the batteries are empty. A: Check if the power is on. A: Check if the power cord is securely connected. A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on th[...]

Note Before calling for assistance, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the In- formation section or contact your dealer. Troubleshooting 97[...]

Specifications General General Model Name SyncMaster 700TSn-2,820TSn-2 LCD Panel Size SyncMaster 700TSn-2 70 inches (177 cm) SyncMaster 820TSn-2 82 inches (207 cm) Display area SyncMaster 700TSn-2 1549.44 mm (H) x 871.56 mm (V) SyncMaster 820TSn-2 1805.76 mm (H) x 1015.74 mm (V) Pixel Pitch SyncMaster 700TSn-2 0.807 mm (H) x 0.807 mm (V) SyncMaster[...]