Samsung 700NF Bedienungsanleitung

SyncMaster 700NF SyncMaster 900NF Color Monitor Owner’ s Instructions[...]

Information in this document is subject to change without notice. © 1999 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Electronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for incidental or c[...]

English 1 English Safety Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Unpacking Y our Monitor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Setting up Y our Monitor . .[...]

English 2 1 Before connecting the AC power cord to the DC adapter outlet, make sure the voltage designa- tion of the DC adapter corresponds to the local electrical supply . 2 Never insert anything metallic into the monitor openings. Doing so may create the danger of electric shock. 3 T o avoid electric shock, never touch the inside of the monitor .[...]

English 3 Unpacking Y our Monitor Please make sure the following items are included with your monitor . If any items are missing, contact your dealer . Manual Power Cord Monitor and Stand Signal Cable Warranty Card (Not available in all locations) CD-ROM[...]

English 4 Setting up Y our Monitor Connecting Y our Monitor Figure 1. Cable connections 1 T urn off your computer and unplug its power cord. 2 Connect the signal cable to the D-SUB or BNC signal port on the back of your monitor . 3 If you are using an IBM-compatible computer , skip to step 5. If you are using a Macintosh computer , connect the othe[...]

English 5 Setting up Y our Monitor Plug and Play Our adoption of the new VESA ¤ Plug and Play solution eliminates complicated and time consuming setup. It allows you to install your monitor in a Plug and Play compatible system without the usual hassles and confusion. Y our PC system can easily identify and configure itself for use with your displ[...]

English 6 Setting up Y our Monitor Windows ¤ 95 T o determine the version of Windows ¤ 95 that your computer uses, right click on the My Computer icon on the Windows desktop and select Properties . The version number can be seen on the General section under “System:”. Follow the directions given below according to the version of your Windows [...]

English 7 Figure 2. Monitor self test screen The three boxes inside the border are red, green and blue. Failure of any of the boxes to appear indicates a problem with your monitor . This box also appears during normal operation if the video cable becomes disconnected or damaged. 4 T urn off your monitor and reconnect the video cable; then turn on b[...]

English 8 User Controls Y our samsung SyncMaster computer monitor allows you to easily adjust the characteristics of the image being displayed. All of these adjustments are made using the control buttons on the front of the monitor . These buttons operate the on-screen menu, which shows you the monitor’ s settings and allows you to change those s[...]

English 9 English Adjusting Y our Monitor Automatic Save Whenever you open the on-screen menu and allow an adjustment window to remain active for about 3 seconds without pressing another button, the monitor automatically saves any adjustments you have made. These changes are saved into a user area in the monitor . User areas are reserved according [...]

English 10 Adjusting Y our Monitor Direct-Access Feature The feature described on this page and the next page can be accessed quickly, at the touch of one button. When you finish making adjustments to a feature, push the EXIT () button to turn off the menu or allow the OSD to time out and disappear automatically OSD Lock/Unlock Allows you to secure[...]

English 11 English Adjusting Y our Monitor Menu Features The following features can all be accessed using your monitor’ s on-screen menu system. Follow the instructions below to adjust the features. Once you are finished making adjustments to a feature, push the EXIT button to return to the then push EXIT again to turn off the menu. Brightness/Co[...]

English 12 Adjusting Y our Monitor Size Follow these instructions to change the size of the monitor’ s entire display . 1 With the menu off, push the button. Push the button or button until the “Position / Size” screen is displayed. 2 Push the button or button to select Size . 3 Push the button to open the Size adjustment screen. 4 Use the an[...]

English 13 English Adjusting Y our Monitor Parallel/Rotation Adjust the parallelogram setting when the display is leaning left or right; adjust the rotation setting when the entire display is tilted left or right. 1 With the menu off, push the button. Push the button or button until the “Geometry” screen is displayed. 2 Push the button or butto[...]

English 14 Adjusting Y our Monitor Pinbalance Adjust the pinbalance setting when the sides of the display are bowed towards the left or right. 1 With the menu off, push the button. Push the button or button until the “Geometry” screen is displayed. 2 Push the button or button to select Pinbalance . 3 Push the button to open the Pinbalance adjus[...]

English 15 English Adjusting Y our Monitor Corner Distortion Adjust corner distortion when the border/outside line(s) displayed on the screen are not straight. 1 With the menu off, push the button. Push the button or button until the “Geometry” OSD is displayed. 2 Push the button or button to select Corner Distortion . 3 Push the button to acce[...]

English 16 Adjusting Y our Monitor Color Color temperature is a measure of the “warmth” of the image colors. The available range is between 5000 to 9300K. Follow these steps to change the color temperature and adjust individual R, G, B color control. 1 With the menu off, push the button. Push the button or button until the “Color” screen is[...]

English 17 English Adjusting Y our Monitor Clear Moiré A “moiré” pattern can appear on your screen, looking like a series of concentric circles or arcs. T o eliminate this pattern, use the clear moiré adjustments. 1 With the menu off, push the button. Push the button or button until the “Screen” OSD is displayed. 2 Push the button or but[...]

English 18 Adjusting Y our Monitor Convergence Convergence affects picture clarity . Adjust the horizontal or vertical convergence to properly align the color dots that make up the image. 1 With the menu off, push the button. Push the button or button until the “Screen” OSD is displayed. 2 Push the button or button to select Convergence . 3 Pus[...]

English 19 English Adjusting Y our Monitor Degauss The Degauss feature will remove color impurities caused by magnetic fields. Do not use the Degauss feature more than once within a 30-minute period. 1 With the menu off, push the button. Push the button or button until the Advanced” screen is displayed. 2 Push the button or button to select Dega[...]

English 20 Adjusting Y our Monitor Recall Use the recall feature to reset these monitor settings to their original levels: Position, Size, Pincushion, T rapezoid, Parallelogram, Pinbalance, Rotation, Clear Moiré, Convergence, and Purity . 1 With the menu off, push the button. Push the button or button until the “Advanced” screen is displayed. [...]

English 21 English Adjusting Y our Monitor Sync. Input T ype Use this menu to set your monitor to the correct type of synchronization. Select “Separate” if the computer is sending a separate synchronization signal. Select “Sync. on Green” if the computer expects the monitor to synchronize with the green signal it sends. Refer to your comput[...]

English 22 Adjusting Y our Monitor D-SUB/BNC Use this menu to choose between the signal source connected to the BNC connector input and the signal source connected to the D-SUB connector input. 1 With the menu off, push the button. Push the button or button until the “Advanced” screen is displayed. 2 Push the button or button to select D-SUB/BN[...]

English 23 English Adjusting Y our Monitor Menu Duration The menu will automatically turn off if no adjustments are made for a certain time period. Y ou can set the amount of time the menu will wait before it turns off. 1 With the menu off, push the button. Push the button or button until the “Menu” screen is displayed. 2 Push the button or but[...]

English 24 Appendix PowerSaver This monitor has a built-in power management system called PowerSaver. This power management system saves energy by switching your monitor into a low-power mode when it has not been used for a certain amount of time. The available modes are “On,” “Standby ,” “Suspend,” and “Off”. This power management [...]

English 25 English Appendix Q & A Black vertical lines are visible on the screen. Thin vertical black lines on one or both sides of the screen. This minor condition is caused by grille element overlap which can occur during shipping. We suggest slapping the cabinet sides with an open hand after the monitor is warm. If this fails, position an op[...]

English 26 Appendix T roubleshooting Before calling for service, check the information in this section to see if you can remedy any problems yourself. If you do need assistance, please call the phone number on the warranty card, the phone number on the back cover of this manual, or contact your dealer . T able 2. T roubleshooting problems Symptom C[...]

English 27 English Appendix Specifications T able 3. Specifications Picture T ube 700NF : 43.0 cm (17") Full square type [40.6 cm(16”) Viewable] 900NF : 48.2 cm (19") Full square type [45.8 cm(18”) Viewable] Flat face, 90° Deflection Dot pitch : 0.25 mm Anti-reflection coating with anti-electrostatic properties Medium-short persi[...]

English 28 Appendix Pin Assignments Figure 1: Male T ype Figure 2: Male T ype T able 4. 15-Pin D-SUB connector Sync. T ype 15-Pin Side of the Signal Cable (Figure 1) Cable Adapter (Figure 2) Pin No. Separate Composite Sync on Green Apple MacII 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 Red Green Blue GND DDC Return GND-R GND-G GND-B Reserved GND-Sync./ Se[...]

English 29 English Appendix NC = No Connection Display Modes For the display modes listed below , the screen image has been optimized during manufacture . T able 5. BNC Connectors Pin Signals Assignment Sync-On-Green Composite Sync. Separate Sync. R Red Red Red G Green+Sync. Green+Sync. Green B Blue Blue Blue H/V NC H/V Comp. Sync. H-Sync. V NC NC [...]

English 30 English[...]

English 30 English A Advanced , 19 Automatic Save , 9 B BNC , 22 Brightness , 11 C CAUTION , 2 Clear moire , 17 Color , 16 Contrast , 11 Convergence , 18 Corner distortion , 15 D Degauss , 19 D-SUB , 22 E EXIT ( ) button , 8 F Focus , 17 G Geometry , 13 I Information , 10 Information ( ) button , 8 L Languages , 23 Linearity , 14 M Menu , 23 MENU ([...]

Français Deutsch Español Portuguese English Italiano Regulatory Infor mation FCC Information User Instructions The Federal Communications Commission Radio Fre- quency Interference Statement includes the following warning: Note: This equipment has been tested and found to comply with the limits for a Class B digital device, pur - suant to Part 15 [...]

U.S.A. : Samsung Electronics America (SEA) One Samsung Place Ledgewood, NJ 07852 T el. : 1-800-SAMSUNG (1-800-726-7864) CANADA : Samsung Electronics Canada Inc. 7037 Financial Drive Mississauga, Ontario L5N 6R3 T el. : 1-800-SAMSUNG (1-800-726-7864) Fax. : (905) 542-1199 GERMANY : Samsung Electronics GmbH Samsung-Haus Am Kronberger Hang 6/65824 Sch[...]