Samsung 700TSn Bedienungsanleitung

Install Programs PDF Manuals Registra tion Safety Instructions Introduction Connections Using the Software A djusting the LCD Display Troubleshooting Specificat ions Information Appendix © 200 8 S ams ung Electro nics Co., Ltd. A ll rights rese rved. Model SyncMaster 700TSn, 820TSn Select Language[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Safety Instructions Notational Please rea d the follow ing safety i nstructi ons as they ar [...]

Use only a properly grounded plug and receptacle. z An improper ground may cau se electri c shock or equipm ent damage.( Class l Equipmen t only. ) Insert the power plug firmly so that it does not come loose. z A bad connec tion may ca use fire. Do not excessively bend the plug and wire nor place heavy objects upon them, which could cause damage . [...]

Failure to do so may cau se serious damage to your LCD Display . Place your LCD Display in a location with low humidity and a minimum of dust. z Failure to do so may caus e electric shoc k or fire inside the LCD Displa y. Do not drop the LCD Display when moving it. z This may cau se damage to the product or the person carrying it . Install the LCD [...]

Put down the LCD Dis play carefull y. z Failing to do so may damage t he LCD Display. Do not place the LCD Disp lay face down. z This may da mage the TFT-L CD surfac e. The installation of the bracket must be done by a qualified professional. z Instal ling the br acket by unq ualifie d personnel may result in injury. z Always use the mounting dev i[...]

If the connector between the plug and the pin is dusty or dirty, clean it properly using a dry cloth. z A dirty conne ctor may caus e electric shock or fire . Make sure to unplug the power cord before cleaning the product. z Otherwi se, thi s may ca use electr ic shoc k or fi re. Unplug the power cord from the power outlet and wipe the product usin[...]

Do not try to move the LCD Display by pulling only the wire or the signal cable. z This may caus e a break down, electric shock or f ire due to da mage to the cable. Do not move the LCD Display right or left by pulling only the wire or the signal cable. z This may caus e a break down, electric shock or f ire due to da mage to the cable. Do not cove[...]

outlet and co ntact the Service Center. When viewing a fixed screen for an extended period of time, residual image or blurriness may a ppear. z Change the mode to energy saving mode or set a screens aver to a changing picture when away from th e LCD Displa y for an exte nded period of time. Adjusts the resolution and fre quency to the level appropr[...]

Place the product out of children’s reach, as they could damage by hanging onto it. z A falling product m ay cause inju ry to the pe rson or even fatality. When not using the product for an extended period of time, keep the product unplugged. z Otherwis e, this may cause heat emi ssion from the accumulat ed dirt or degraded insu lation, causing e[...]

recycling center or to a store selling the sam e type of the battery or rechargea ble batter y. Power Installat ion Guide z Make sure to r ead and follow t he instructions ca refully and c orrectly. Failing to do so, may result in death, serious pe rsonal injury or fire. Power Installat ion Guide z Before installing th e product, make sure to check[...]

240 V / 50 Hz 3.766 898 1 .59 (1/8 W max. ou tput power) 254 V / 50 Hz 3.555 886 1 .59 (1/8 W max. ou tput power) 90 V / 60 Hz 10 .483 945 1.59 (1/8 W max . output power) 100 V / 60 Hz 9.281 933 1 .59 (1/8 W max. ou tput power) 240 V / 60 Hz 3.754 889 1 .59 (1/8 W max. ou tput power) 254 V / 60 Hz 3.572 886 1 .59 (1/8 W max. ou tput power) © 1995~[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Introduction Package Contents Note • Please make su re the followin g items are included w[...]

Other Remote Control Batteri es (AAA X 2) (Not availab le in all locations) BNC to RCA Adaptor Jack Sold separately Wall Mount KIT DVI Cable BNC Cable LAN Cable Your LCD Display Front 1) MENU Opens the on-sc reen menu and ex its from the menu or close s the adjust ment menu. 2) Navigate buttons ( Up-Down buttons) Moves from one menu i tem to anoth [...]

Changing the source i s only allow ed for extern al device s that are co nnected to t he LCD Displa y at the time . [PC] → [BNC] → [DVI] → [AV] → [S-Video] → [Component] → [HDMI] → [Magic Info] >> Click here to see an animation clip. 6) PIP Push the PIP butto n to turn the PIP screen On / Off. More than on e PIP cannot ove rlap [...]

1) POWER IN The power c ord plugs into th e LCD Displa y and the wall plug. 2) REMOTE OUT/IN You can use a wi red remote co ntrol by connecti ng it to yo ur monito r. 3) RS232C OUT/IN (RS232 C Serial PORT) MDC(Multi ple Display Control) Prog ram Port 4) DVI / P C / HDMI IN [H DMI/PC/DVI/BNC AUDIO IN](HDMI/ PC/DVI/BNC Audio Connection Terminal (Inpu[...]

Component Connecti on: connecti ng the P R , Y, P B ports 10) BNC/COMPONEN T IN [R/P R , G/Y , B/P B , H, V] (BNC/Component Connection Terminal (Input)) 11) AV AUDIO IN [L-AU DIO-R] (LCD Display Audio Connection Terminal (Input)) 12) AV OUT [VIDEO] (VIDEO Connection Terminal): AV mode (Output) 13) AV IN [VIDEO] (VIDEO Connection Terminal) (Input) 1[...]

1. ON / OFF 2. MagicInfo 3. MDC 4. LOCK 5. MagicInfo buttons 6.+100 -/ -- 7. VOL 8. MUTE 9. TTX/MIX 10. MENU 11. ENTER 12. P.MODE 13. AUTO 14. ENTER/PRE-CH 15 . CH/P 16. SOURCE 17. INFO 18. EXIT 19. Up-Down Left-Right buttons 20. S.MODE 21. STILL 22. FM RADIO 23. P.SIZE 24. SRS 25. DUAL/MTS 26. PIP 27. SOURCE 28. SWAP 29. SIZE 30. RE W 31. STOP 32.[...]

This is displaye d on the lower le ft corner o f the screen. The audio re sumes if MUTE or - VOL + is pressed in the Mute mode. 9) TTX/MIX TV chan nels prov ide tex t inform ation ser vices vi a telet ext. - This fucti on does not work f or this monitor. 10) MENU Opens t he on-screen menu and exits from the menu s creen or clo ses the scree n adjus[...]

25) DUAL/MTS - This fuctio n does not work for thi s monitor. DUAL- STEREO/MONO, DUAL l / DUAL ll and MO NO/NICAM MONO/NICAM STEREO can be ope rated dependin g on the broadc asting type by using the DUAL button on the remote co ntrol whi le watchin g TV. MTS- You can select MTS (Multichannel Television Stereo) mode. Audio Type MTS/S_Mode Default FM[...]

Mechanical Layout | Monitor Head | Speaker | Installation VESA Brack et | Wall Brac ket Installation 1. Mechani cal Layout 2. Monitor Head 820DXn[...]

3. Installation VESA Bracket z When installing VESA, make sure to comply with the international VESA standards. z Purchasing VES A Bracket and I nstallation Informa tion : Please co ntact your neare st Samsung Di stributor to place an order. Aft er your order is p laced, instal lation pr ofessionals will visit you and install th e bracket. z At lea[...]

For securing the br acket on a wall, use onl y machine screws of 6 mm di ameter and 8 to 12 mm length. 4. Wall Bracket Installation z Contact a t echnician for in stalling t he wall bracket. z Samsung Electronic s is not responsibl e for any dama ges to the pro duct or harm to cust omers when the installation i s done by th e custom er. z This prod[...]

D. Hinge (Rig ht) There are t wo hinges(l eft and righ t). Use the c orrect one. Before drilling into the w all, check if the length between the two lock ing holes at t he back of the product is correct. If the length is too sho rt or long, loosen all or some of the 4screw s on the wa ll bracket to ad just the length. A. Length betw een the tw o lo[...]

Remove the 4 screw s on the back of the product. Insert the screw B into the plastic han ger. 1. Mount th e product on t he wall bra cket and make sure it is prope rly fixed to the left a nd right plastic hang ers. 2. Be careful when inst alling the pro duct on the bracket as fingers can be caught in th e holes. 3. Make sure the wall bracket is sec[...]

1. Fix the p roduct to the wall b racket. 2. Hold t he product at the top in the cente r and pull it forwa rd (direc tion of the arrow) to adj ust the angl e. 3. You ca n adjust the brack et angle betw een -2°and 1 5 °. Make sure to use the top center, and no t the leftor the righ t side of the prod uct to adjust the angle.[...]

Mechanical Layout | Monitor Head | Speaker | Installation VESA Brack et | Wall Brac ket Installation 1. Mechani cal Layout 2. Monitor Head 700DXn[...]

3. Installation VESA Bracket z When installing VESA, make sure to comply with the international VESA standards. z Purchasing VES A Bracket and I nstallation Informa tion : Please co ntact your neare st Samsung Di stributor to place an order. Aft er your order is p laced, instal lation pr ofessionals will visit you and install th e bracket. z At lea[...]

For securing the br acket on a wall, use onl y machine screws of 6 mm di ameter and 8 to 12 mm length. 4. Wall Bracket Installation z Contact a t echnician for in stalling t he wall bracket. z Samsung Electronic s is not responsibl e for any dama ges to the pro duct or harm to cust omers when the installation i s done by th e custom er. z This prod[...]

D. Hinge (Rig ht) There are t wo hinges(l eft and righ t). Use the c orrect one. Before drilling into the w all, check if the length between the two lock ing holes at t he back of the product is correct. If the length is too sho rt or long, loosen all or some of the 4screw s on the wa ll bracket to ad just the length. A. Length betw een the tw o lo[...]

Remove the 4 screw s on the back of the product. Insert the screw B into the plastic han ger. 1. Mount th e product on t he wall bra cket and make sure it is prope rly fixed to the left a nd right plastic hang ers. 2. Be careful when inst alling the pro duct on the bracket as fingers can be caught in th e holes. 3. Make sure the wall bracket is sec[...]

1. Fix the p roduct to the wall b racket. 2. Hold t he product at the top in the cente r and pull it forwa rd (direc tion of the arrow) to adj ust the angl e. 3. You ca n adjust the brack et angle betw een -2°and 1 5 °. Make sure to use the top center, and no t the leftor the righ t side of the prod uct to adjust the angle.[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Connections Installing the Stand KIT Note • Only the supp lied bolts shou ld be used. Caut[...]

Using a Power cord with Earth In the even t of failure , the earth l ead may caus e electri c shock. Make sure to wir e the earth le ad in correct ly, befor e connecti ng the AC power . When un-wir ing the eart h lead, make su re to disco nnect the AC power i n advance. Note • AV input de vices such as DVD playe rs, VCR's or ca mcorders as w[...]

3) Connect the a udio cable fo r your LC D Display to the audio po rt on the ba ck of your co mputer. Note • Turn on bot h your compu ter and the LC D Display. Note • The DVI ca ble or BNC cabl e is optiona l. Contact a l ocal Samsung Elec tronics Servi ce Center to buy optional it ems. Connecting a VCR 1) AV input devices such as VCRs or Camco[...]

1) Connect a set of audio cables betw een the COMPONENT AUDIO IN [L-AUDIO-R] on the LCD Display and the AUDIO OUT jacks on the DVD playe r. 2) Conn ect a Compone nt cable bet ween the BNC/COMPONENT IN - P R , Y, P B por t on the LCD Disp lay and the P R , Y, P B jacks o n the DVD p layer. Note •S e l e c t Component for the connectio n to a DVD p[...]

• The audio-vide o cables sho wn here are usually include d with a Camc order. (If not, check your local electr onics store.) If your ca mcorder is stereo, you need to conne ct a set of two c ables. Connecting a DTV Set Top Box Note • The conne ctions for a typical Set Top Box are shown belo w. 1) Conn ect a Compone nt cable bet ween the BNC / [...]

• Connect a set of aud io cables b etween the A UX L, R jacks on the AUDIO SYSTEM and th e AUDIO OUT [L-AUDIO-R] on LCD D isplay. Connecting to a Wired Remote Control Note • You can control yo ur monitor by allowing i t to rece ive the remo te control signals of other devi ces throug h the REMOTE OUT terminal. • You can control a de vice by a[...]

1) Connect the D VI output ter minal of a dig ital output device to the HDM I IN termina l of the monit or using a DVI to HDMI cable. 2) Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colore d audio outpu t terminals of the digital outpu t device, and connect the opposite jack to the HDM I / PC / DVI-D AUDIO IN termi[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Using the Software Monitor D river Note • When pro mpted by the o perating sys tem for the[...]

Microsoft ® Windows Vist a™‚ Operatin g System 1. In sert your Manual CD int o your CD-RO M drive. 2. Cli ck (Start) an d "Control Panel". Then, double- click on "Appea rance and Person alizatio n". 3. Cli ck "Personal ization" and t hen "Display Set tings". 4. Click "Advanced Settings...". 5. [...]

7. Ch eck the "Browse my computer for driver software" checkbox an d click "Let me pick from a l ist of devi ce drivers on my computer". 8. Click "Have Disk... ” and select the folder (for ex ample, D:D rive) where t he driver setup file is located, and click "OK". 9. Sel ect the mode l that matches your monit [...]

Microsoft ® Windows ® XP Operating System 1. Insert CD into the CD-ROM drive . 2. Click "Start" → "Control Pane l" then clic k the "Appearanc e and Themes" ic on. 3. Click "Display" icon and ch oose the "Set tings" tab then click "Advanced...". 4. Cli ck the "Propert ies" but[...]

7. Cli ck the "Browse " button then choose A:(D: Driver) and cho ose your moni tor model in t he model list a nd click the "Next" butto n. 8. If you can see fol lowing messag e window, th en click the "Co ntinue Anyway " button. The n click "OK" button. 9. Click the "Close" button th en click "[...]

1. Clic k "Start", "Setti ng", "Control Pan el". 2. Double click the "Display" ico n. 3. Sel ect the "Setting s" tab and cl ick "Advanced Pr operties" b utton. 4. Ch oose "Moni tor". Case1 : If the "Properties" bu tton is inactive , it means you r monitor is properly co[...]

Introduction A Multiple Display Cont rol (MDC) is an application al lowing various displays to be easil y and simultaneously operated on a PC. RS-232C, a standard of serial communication, is used for the communication between a PC and a display. Therefore, a serial cabl e should be connected be tween the serial port on a PC and the serial port on a[...]

Main Icons Select Button Remocon Info Grid Safety Lock Display Selection Port Selection Control Tools 1. Use the main icons to switch into each screen. 2. Allows you to enable or disable the remote control s ignal receiving function of the di splay unit. 3. Set the Safety Lock function. When setting the Lock funct ion, you can only operate power an[...]

1. The Multiple Display Cont rol is orig inally set t o COM1. 2. If any port other than CO M1 is used, COM1 through COM4 can be sel ected in the Port Selection Menu. 3. If the exact port name that is connected to the LCD Display usi ng a serial cable is not selecte d, communication will be unavailable. 4. The selected port is stored in th e program[...]

Info Grid shows some basic information necessary to Power Cont rol. 1) (Power Status) 2) Input 3) Image Size 4) On Timer 5) Off Timer 2. Use the Select All butto n or Check Box to choose a displa y to control. Power Control allows contro lling some of the functions of the selected display. 1) Power On/Off[...]

- Turns the power of the selecte d display On/Off. 2) Volume - Controls the volume level of the selected display. It receives the volume value of the selected display from the sets a nd displays it in the slider. (When you cancel the se lection or choose Sel ect All, the value returns to the defau lt value 10) 3) (Mute O n/Off) - Turns on/off the M[...]

Info Grid shows some basic information necessary to Input Source Control. 1) PC - Changes the Input Source of the se lected display to PC. 2) BN C - Changes the Input Source of the se lected display to BNC. 3) DVI - Changes the Input Source of the se lected display to DVI. 4) TV - Changes the Input Source of the se lected display to TV. 5) DTV - Ch[...]

Info Grid shows some basic information necessary to Image S ize Control. 1) ( Power Statu s) - Shows the power status of the curren t display. 2) Image Size - Shows the current Image Si ze of the display in use. 3) Input - Shows the current Input Source of the display in use. 4) I nfo Grid displays only the displays whose Input Source is PC, BNC, D[...]

Info Grid shows some basic information necessary to Image S ize Control. 1) Cl ick the Video Source ta b to adjust Image Size for TV, AV, S-V ideo, Component, DVI(HDCP), HD MI, DTV. Click Select All or use Ch eck Box to select a display to c ontrol. 2) I nfo Grid displays only the display having TV, AV, S-Video , Component or DVI(HDCP) as input sou[...]

Info Grid shows some basic information necessary to Time Con trol. 1) Cu rrent Time - Set the current time for the sele cted display (PC Time). - To change the current time, first change the PC Time. 2) On Time Setup - Set the Hour, Minut e, AM/PM of On Time Setup, Status, Sou rce, Volume of the selected displ ay. 3) Off Ti me Setup - Set the Hour,[...]

Info Grid shows some basic information necessary t o PIP Size Control. 1) P IP Size - Shows the current PIP Size of t he display in use. 2) OFF - Turns off the PIP of the selected dis play. 3) Large - Turns on the PIP of the selected displ ay and changes the size to Large. 4) Small - Turns on the PIP of the selec ted display and changes the size to[...]

Info Grid shows some basic information necessary t o PIP Source Control. 1) P IP Source - PIP Source can be con trolled with turning on the LCD Displa y power. 2) PC - Changes the source of the PIP of the se lected display to PC. 3) BNC - Changes the source of the PIP o f the selected display to BNC. 4) DVI - Changes the source of the PIP o f the s[...]

Info Grid shows some basic information necessary to Sett ings Control. When each function is se lected, the set value of the sel ected function is displayed in the sl ide.When selected, each function fetches th e value for the set and displa ys it on the slide bar. When "Selec t All" is chosen, the default value is displayed. Changi ng a [...]

1. Click Settings of th e main icons and the Settings Control screen appears. Info Grid shows some basic information necessary t o Settings Control. When each f unction is selected, the set valu e of the selected functi on is displayed in the slide. Wh en selected, each functio n fetches the value for the set and displays it on the slide bar. When [...]

Audio 1. Click Settings of th e main icons and the Settings Control screen appears. Info Grid shows some basic information necessary t o Settings Control. When each f unction is selected, the set valu e of the selected functi on is displayed in the slide. Wh en selected, each functio n fetches the value for the set and displays it on the slide bar.[...]

Info Grid shows some basic information necessary to Sett ings Control. 1) Image Lock - Available only for PC, BNC. 2) Co arse - Adjusts Coarse of the sele cted display. 3) Fine - Adjusts Fine of the sele cted display. 4) P osition - Adjusts Position of the selected display. 5) A uto Adjustment - Self-Adjust to the incomin g PC signal. The Input sou[...]

An "Info Grid" showing seve ral basic data items appears. 1) Maintenance - Allows the Maintenan ce Control function for all i nput sources. 2) A uto Lamp Control - Automatically adju sts the backlight of the select ed display at a specified time. The Manual Lamp Control automatic ally turns off if you adju st using the Auto Lamp Control. [...]

1) S afety Screen - Eliminates the afterimages t hat can result when the select ed display stays in Pause mode for an exten ded period of time. You can set the repeat cycle timer by selectin g the "Interval" by hour and "Second" by second. It can be set to S croll, Pixel, Bar and Eraser by Screen Type. The Input source of MagicI[...]

1) Video Wall - A Video Wall is a set of video scree ns that are connected together, so that each screen shows a part of the whole picture or so that the same picture is repeated on each screen. 2) Video Wall (Screen divider) - The screen can be divided into. You can select a number of s creens with a different layout when di viding. z Select a mod[...]

- Check the displays to see if any of the other displays co nnected have the same I D. If more than one displays have the same ID, those displays are not properly detected by the program due to data co nflict. - Check if the Display Set ID is a number between 0 and 25 . (Adjust using the Display menu) Note : A Display Set ID must be a value between[...]

IRTouch Screen Cont rol Panel Double cli ck the mark on the tabletop ( as the follo wing indic ation), or fo llow "Start" -> "All programs " -> "IRTouchSy stems", a nd then click "IR To uchScreen Cont rol Panel" and go to the Cont rol Panel of th e touchscr een as followi ng. General Control Panel menu [...]

2. Select the to uchscreen you want in the list and Click [Calib rate]. After calibr ation, the ite m "Calibrated" will show "Yes". Calibrati on compromi sing of steps : select a to uchscreen in the info rmation lis t, then cli ck "calibra te" button wh en the calibr at ion window shows u p. Calibration is d one by cli[...]

1. Click on touch Mouse sin gle click event happ ens immedia tely at the po int when the finger con tact the touchscre en, not for dr agging ob jects. In this mode the touchscr een respon ds fastest, it's usual ly used for big button appl ications . 2. Click on Release Mouse cli ck event h appens at the point whe re the fing er leaves t ouchsc[...]

9. Prevent System to Standb y Unable (d efault); th is functio n may preve nt System from St andby. When th e IR touchs creen is prov ided with se rial ports as a simple output device, the fu nction ma y enable rec overy out of the state of automatic system stan dby. 10. Drag Delay The function show the am ount of millise cond "Drag De lay&quo[...]

Instal lment 1. Send Right C lick To enable righ t-click function (default). Click and press on any area on th e screen fo r two second, the right-click m enu will p op- up. Right- click is on ly availabl e in Mouse Emulati on mode. The “ Delay ” value is 1000( 1second) ; The “ Area ” value is set to 32px at optimum. 2. Enable Double Click [...]

Specification 1. Each value should be gradua lly set in "Delay T ouch Settings " after fulfillme nt of "Enable De lay Touch". "Del ay" is set to 40 and "Area" to 16 . 2. Enter count It means how m any times you click to approach the setting valu e within 3 seconds. Then dr iver will install the function of &q[...]

Select Langu age Main Page Model The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Adjusting the LCD Display Input Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicInfo Source List [MENU] [...]

[MENU] → [ENTER] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] Selects the in put source for the PIP. - PC : AV / S-Video / Comp onent / HDMI Mo de - BNC : AV / S-Vide o / HDMI Mode - DVI : AV / S-Video / C omponent Mode - AV / S-Video : PC / BNC / D VI Mode - Component : PC / DVI Mode - HDMI : PC / BNC[...]

MagicBright™ [MENU] → [ ∧ / ∨ ] → [ENTER] → [ENTER] → [ ∧ / ∨ ] → [ENTER] MagicBri ght™ is a new feature prov iding the opt imum viewi ng environ ment dependi ng on the cont ents of the image you a re watching. Currentl y four diff erent modes a re availab le: Entertai n, Interne t, Text and C ustom. Each mode has its own pre-[...]

1) Red 2) Gree n 3) Blue Note • If you adjust t he picture by u sing the Color Control func tion, Color Tone will turn to the C ustom mo de. Color Temp [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [< / >] → [ENTER] Color Temp is a measure of the 'warmth' of the image colo rs. (This function is only ena[...]

This is used to make up for t he weak RG B signal transmitte d by a long signal cable. (Available in PC , BNC mode on ly) 1) Signa l Balance [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [ENTER] → [ ∧ / ∨ ] → [ENTER] Selects eit her On or Off wi th the signal control. 2) Signa l Control [MENU] → [ ∧ / ∨ ] →[...]

2) Standard 3) Movie 4) Custom [The direct button on the remote control is the ' P.MOD E ' button.] Custom [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [ ∧ / ∨ ] → [ENTER] → [< / >] → [ENTER] By using the o n-screen men us, the contr ast and bright ness can be cha nged to your pe rsonal prefe ren[...]

Brightness Sensor [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [< / >] → [ENTER] Brightnes s Sensor is to automatic ally detect distribut ion of inpu tted visual signal and ad just to cr eate optimu m brightness. 1) Of f 2) On Dynamic Contrast [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] →[...]

AV S-Video Component HDMI MagicInfo Mode [MENU] → [ ∧ / ∨ ] → [ENTER] → [ENTER] → [ ∧ / ∨ ] → [ENTER] The LCD Di splay has a b uilt-i n high fidel ity stereo amplifi er. 1) St andard Selects Standard f or the st andard fac tory sett ings. 2) Music Selects Music wh en watching m usic videos or concerts. 3) Movie Selects Movie wh en[...]

Sound Select [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [ ∧ / ∨ ] → [ENTER] Selects either Main or Sub when PIP is On. 1) Main 2) Sub [Available Modes: PIP ON] Setup Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicInfo Language [MENU] → [ ∧ / ∨ ] → [ENTER] → [ENTER] → [ ∧ / ∨ ] → [E[...]

Menu Transparency [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [ ∧ / ∨ ] → [ENTER] Changes t he opaquene ss of the OSD b ackgroun d. 1) High 2) Medium 3) Low 4) Opaque Safety Lock PIN [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENT ER] → [0~9] → [0~9] → [0~9] The pass word can be ch anged. Ener[...]

[MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] Sets how many part s the screen should be d ivided horiz ontally. - Five adjustment l evels: 1, 2, 3, 4, and 5. 4) Vertical [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] ?[...]

When the picture i s not dis played pr operly on the scre en when set ting th e graphics card res olution o f the computer to 1024 x 768 @ 60Hz , 1280 x 768 @ 60H z, 1360 x 768@ 60 Hz or 1366 x76 8 @ 60Hz, by usin g this functi on(Resolut ion Select), you can have t he picture displayed on the screen i n the specif ied resolut ion. Available in PC/[...]

Multi Co ntrol Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicInfo Multi Co ntrol Assigns an ind ividual ID t o the SET. 1) ID Setup [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTER] → [ENTER] → [0~9] A ssigns distinctive IDs to the SET. 2) ID Input [MENU] → [ ∧ / ∨ ] → [ENTER] → [ ∧ / ∨ ] → [ENTE[...]

• Resetting th e password f or the fun ction key lock. Press MUTE → 1 → 8 → 6 → On. The passwo rd will be rese t to '0000'. The remote cont rol is requ ired for resetti ng the pas sword. MagicInfo Available Modes PC / BNC / DVI AV S-Video Component HDMI MagicInfo Note • The operat ing system for this set on ly supports E nglis[...]

4.Connec t your keyboar d and mouse and p ress the “ALT + F1 2” keys on yo ur keyboard . 5.The Window s Desktop is displayed and th e Magicinfo pro icon (the image will be ins erted) appe ars. Move th e cursor ov er the icon. Note • If the Mag icinfo ic on is not disp layed on the no tification a rea, double click the Magicinf o icon on the w[...]

1) Auto A utomatically fits th e image to th e window. Original Shows the prop erties of th e original fi le. 2) Slide Show Displays th e propertie s of the origin al file as th ey are. 3) Interval Control s the time int ervals be tween image fi les for a s lide show. (5 Sec, 10 Sec, 20 Sec, 30 Sec, 6 0 Sec) 4) Rotation Displays an image file by tu[...]

Changes the TCP/IP s ettings. 3) Connection Modifies the network settings . 4) Password The password can be chan ged. • The password shou ld be betwee n 6 and 12 char acters in numeric for mat. (You shou ld enter a pas sword betwee n 6 and 12 char acters in num eric for mat) • If you enter the wron g password three times , the setup configurati[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Troubleshooting Self-Test Feat ure Check Note • Check the follo wing items you rself befor[...]

Maintenance and Cleaning 1) Maintaining the LCD Display Case . Clean with a soft c loth after disconnecting the power co rd. • Do not use b enzene, thin ner or other f lammable su bstances, or a wet cloth. • We recommend that a Samsung c leansing age nt is used to pr event damage to t he screen . 2) Main taining t he Flat Pa nel Displa y Screen[...]

Display is secure ly connected. (Refer to Connecti ng a Comput er ) Problem s related t o the Scre en Note • Probl ems relate d to the LCD Di splay scr een and their solutio ns are list ed. Problems Solutions The screen is blank and the power indicator is off. z Ensure that the power cord is firmly con nected and th e LCD LCD Display is on . (Ref[...]

• Problem s related t o audio sign als and their solutions are liste d below. Problems Solutions No sound. z Ensure that the audio cabl e is firmly c onnected to both the audio-in po rt on your LCD D isplay and th e audio-out port on your so und card . (Refer to the Connecting th e LCD Display ) z Check the volume level. The sound level is too lo[...]

Set the resol ution in the Con trol Panel → Appear ance and Themes → Display → Settings. z Windows ME /2000: Set the resol ution in the Con trol Panel → Display → Settings. * Contact the video ca rd manufactur er for det ails. How can I set the Power Saving function? z Windows XP: Set the resol ution in the Con trol Panel → Appear ance [...]

Select Langu age Main Page Model SyncMaster 700TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Specifications General General General Model Name SyncMaster 700TSn LCD Panel Size 70 " Diagona[...]

Audio Inpu t 2 RCA Jack Red(R ) White(L), 0. 5 Vrms (-9 dB) PC Audio Input 3.5 Ø Stereo Jack, 0.5 Vrms (- 9 dB) Frequenc y RF: 80 Hz ~ 15 kHz (at -3 dB) Response A/V: 80 Hz ~ 20 kHz ( at -3 dB) Plug and Play Capability This monit or can be insta lled on any Plu g & Play compati ble system. The i nteractio n of the monito r and the computer sys[...]

PowerSaver State Normal Operation Power saving mode Power off Power Indicator Green Green, Blinking Amber Power Cons umption Less than 808 W Less than 1 W (Off-mod e) Less than 0 W (Power butt on) Preset Timing Modes Preset Timing Modes If the si gnal transf erred from th e computer is the same as t he following Preset Timin g Modes, the screen wil[...]

Select Langu age Main Page Model SyncMaster 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Specifications General General General Model Name SyncMaster 820TSn LCD Panel Size 82 " Diagona[...]

Audio Inpu t 2 RCA Jack Red(R ) White(L), 0. 5 Vrms (-9 dB) PC Audio Input 3.5 Ø Stereo Jack, 0.5 Vrms (- 9 dB) Frequenc y RF: 80 Hz ~ 15 kHz (at -3 dB) Response A/V: 80 Hz ~ 20 kHz ( at -3 dB) Plug and Play Capability This monit or can be insta lled on any Plu g & Play compati ble system. The i nteractio n of the monito r and the computer sys[...]

PowerSaver State Normal Operation Power saving mode Power off Power Indicator Green Green, Blinking Amber Power Cons umption Less than 1010 W Less than 1 W (Off-mod e) Less than 0 W (Power butt on) Preset Timing Modes Preset Timing Modes If the si gnal transf erred from th e computer is the same as t he following Preset Timin g Modes, the screen wi[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Information For Better Dis play A djust th e computer re solution an d screen ine ction rate[...]

Power Of f, Screen Saver, or Power Save Mode z Turn the po wer off for 4 hours af ter 20 hour s in use z Turn the po wer off for 2 hours af ter 12 hour s in use z Set the Monitor to power off with the PC Displa y Properties Po wer Scheme. z Use a Screen saver if poss ible - Screen saver in one color or a mov ing image is r ecommended. Chang e the C[...]

z Every 30 minut es, change th e character s with movement . z All area dis play Moving image toget her with Log o periodical ly. - Cycle: Di splay movi ng image tog ether with Logo for 60 sec onds after 4 hours in use . z The best way to protec t your monito r from Imag e retentio n is to turn Power off, or set your PC, or System to oper ate a Scr[...]

- Select metho d . Instru ction Gu ide : OSD Menu -> Se t Up -> Sa fety Scr een -> Bar . Time Int erval : 1 ~ 1 0 hours ( Reco mmend : 1 ) . Time Period : 10 ~ 50 second ( Recomm end : 50 ) Note • ( Please check CD's User Guide at "OSD Functio n", some model's w ill not available . ) Appl y the Screen Erasing func tio[...]

Select Langu age Main Page Model SyncMaster 700TSn, 820TSn The color and appearanc e of the produc t may vary de pending on the mo del, and th e product spe cificati ons are subject t o change wit hout prior notice for rea sons of perf ormance enha ncement. Appendix Contact SAMSUNG WORLDWID E Note • If you h ave any quest ions or commen ts relati[...]

(7267864, € 0.07/ min) BELGIUM 02 201 2418 http:/ /www.samsung. com/be CZECH REPUBLIC 800 - SAM SUNG (800-726 786) http://www.samsung. com/cz DENMARK 8 - SA MSUNG (726 7864) http:/ /www.samsung.c om/dk EIRE 0818 717 100 http://www .samsung.com /ie FINLAND 30 - 6227 5 15 http://www.samsung.com /fi FRANCE 3260 'dites' SAMSUNG (€ 0,15/Mi[...]

JAPAN 0120-327 -527 http://www .samsung.com/jp MALAYS IA 1800-88 -9999 http://www .samsung.com /my NEW ZEALAND 0800 SAMSUNG (080 0 726 786) http://www.samsun g.com/nz PHILIPPINES 1800- 10-SAMSUNG(726- 7864) http://www.samsung. com/ph SINGAPO RE 1800-SAMSUNG(7 26-7864) http://www.samsung.com /sg THAILAND 1800- 29-3232, 02- 689-323 2 http://www.sams [...]

Example: If the resolu tion is 192 0 x 1080 , this me ans the scr een is compos ed of 1920 hor izontal d ots (horizo ntal resol ution) and 1080 vertic al lines (v ertical re solution ). Multipl e Display Co ntrol (M DC) A Multiple Display Control (MDC) is an application a llowing vario us displays to be easily and sim ultaneously operated o n a PC.[...]

Environme ntal Protecti on Agency (EPA). All other produ ct names ment ioned herein may be the trad emarks or registere d trademark s of their res pective owners . © 1995~2008 SAMSUN G. ALL Rights Reserv ed[...]