Samsung CZ21A113N5 Bedienungsanleitung

COLOUR TELEVISION Owner’ s Instructions Before operating the unit, please read this manual thoroughly , and retain it for future reference. ENG REMOTE CONTROL ON-SCREEN MENUS TELETEXT FUNCTION (depending on the model) S56A_UI_ENG_EU 8/30/03 10:47 AM Page 1[...]

2 ENG S afety Instructions The following illustrations represent the precautions to be taken when using and moving your television. 5¡ 10% H H 35¡ 75% THIS DEVICE IS NOT FOR USE IN INDUSTRIAL ENVIRONMENTS Caution CAUTION: TO PREVENT ELECTRICAL SHOCK, DO NOT REMOVE REAR COVER, NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE [...]

3 ENG Contents ◆ PREPARING YOUR TELEVISION ■ Safety Instructions ................................................................................................ 2 ■ Caution ................................................................................................................. 2 ■ Control Panels ...................................[...]

4 ENG Contr ol P anels ➢ The actual configuration on your TV may be different, depending on your model. Œ INPUT SOURCE SELECTION ´ MENU DISPLAY ˇ VOLUME ADJUSTMENT ¨ CHANNEL SELECTION ˆ STANDBY INDICATOR Ø REMOTE CONTROL SENSOR ∏ POWER ON/OFF ➣ Using the Buttons on the Panel If the remote control no longer works or you have lost it, you[...]

5 ENG Connection P anels ➢ The actual configuration on your TV may be different, depending on your model. Œ AUDIO/VIDEO INPUT ´ HEADPHONE CONNECTOR Side of the TV Front of the TV Œ Connecting External A/V Devices (INPUT) The RCA (VIDEO + AUDIO-L and R) connectors are used for equipment such as camcorders, video disc players and some video game[...]

6 ENG Connection P anels (continued) ➢ The actual configuration on your TV may be different, depending on your model. INPUT 1 MONITOR -OUT INPUT 2 VIDEO ( MONO ) L-AUDIO-R INPUT 1 MONITOR -OUT INPUT 2 VIDEO ( MONO ) L-AUDIO-R RGB 2 1 Œ´ Connecting External A/V Devices (INPUT/OUTPUT) The connectors (RCA or SCART) are used for equipment such as v[...]

7 ENG Once you have connected up your various audio and video systems, you can view the different sources by selecting the appropriate input. 1 Check that all the necessary connections have been made. 2 Switch the television on and if necessary, press the VIDEO () button one or more times until the required input is displayed. ➢ Depending on the [...]

8 ENG Infrared Remote Contr ol (All Functions Ex cept T eletext) ➣ Buttons and markings are subject to change. ➣ Operation of remote control may be affected by bright artificial light near to the TV set. POWER SOUND MENU DISPLAY (OPTION) ONE/TWO-DIGIT CHANNEL SELECTION TURBO SOUND ON/PLUS/OFF (OPTION) TEMPORARY SOUND SWITCH- OFF VOLUME DECREASE[...]

9 ENG Infrared Remote Contr ol (T eletext F unctions) ➣ Buttons and markings are subject to change. TELETEXT HOLD FASTEXT TOPIC SELECTION TELETEXT NEXT PAGE TELETEXT PREVIOUS PAGE TELETEXT DISPLAY/MIX LIST/FLOF MODE SELECTION TELETEXT REVEAL TELETEXT STORE PICTURE SIZE PROGRAMME SELECTION BY NAME TELETEXT SUB-PAGE S56A_UI_ENG_EU 8/30/03 10:47 AM [...]

10 ENG You must insert or replace the batteries in the remote control when you : ◆ Purchase the television. ◆ Find that the remote control is no longer operating correctly. 1 Remove the cover of the remote control by pressing the symbol ( ) and pulling the cover in the direction of the arrow. 2 Insert batteries, taking care to respect the polar[...]

11 ENG The mains lead is attached to the rear of the television. ☛ If you have purchased this television in the United Kingdom, refer to page 38 for further instructions on plug wiring. 1 Plug the mains lead into an appropriate socket. ➢ The main voltage is indicated on the rear of the TV set and the frequency is 50 or 60Hz. 2 Press the “” [...]

12 ENG Plug & Pla y F eature (depending on the model) When the television is initially powered ON, three basic customer settings proceed automatically and subsequently: setting the language, channel and clock. 1 If the television is in Standby mode, press the POWER ( ) button on the remote control. Result: The message Plug & Play is display[...]

13 ENG V ie wing the Demonstration To become familiar with the various menus provided by your television, you can view the inbuilt demonstration. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Function and press the œ or √ button. 3 Press the ▲ or ▼ button to select the Demonstration and press the œ or √ button. R[...]

14 ENG Storing the Channels A utomaticall y (depending on the model) You can scan the frequency ranges available on your television and in your country and store all the channels found automatically. The channels are stored in the order in which they appear in the frequency bands. It is possible that the automatically allocated numbers may not corr[...]

15 ENG When storing channels manually, you can choose: ◆ Whether or not to store each of the channels found. ◆ The number by which you wish to identify each stored channel. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the œ or √ button. 3 Press the ▲ or ▼ button to select the Manual Store and [...]

16 ENG 6 If you know the number of the channel to be stored, press the... 1. ▲ or ▼ button to select the Channel . 2. √ button. 3. ▲ or ▼ button to select the C (Air channel) or S (Cable channel). 4. √ button. 5. ▲ or ▼ button to select the channel. ➣ If no sound or abnormal sound... 1. Press the √ button. 2. Press the ▲ or ?[...]

17 ENG If channel name information is broadcast when you store the channels either manually or automatically, the names are assigned to the channels directly. You can however change these names or assign new names as required. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the œ or √ button. 3 Press the[...]

You can exclude the channels of your choice from the channel scan operation. When you scan through the stored channels, those you have chosen to skip are not displayed. All channels that you do not specifically choose to skip are displayed during scanning. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the[...]

19 ENG If the reception is clear, you do not have to fine-tune the channel, as this is done automatically during the search and store operation. If however the signal is weak or distorted, you may have to fine- tune the channel manually. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the œ or √ button. [...]

You can exchange the numbers of two channels, in order to: ◆ Modify the numeric order in which the channels have been automatically stored. ◆ Give easily remembered numbers to the channels that you watch most often. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Channel and press the œ or √ button. 3 Press the ▲ or[...]

21 ENG You can select the type of picture which best corresponds to your viewing requirements. The following picture effects are available in the order given: ◆ Custom, Standard, Sports, Natural, Mild. 1 Press the MENU () button. Result: The Picture menu is displayed. 2 Press the œ or √ button. Result: The Mode menu is selected. 3 Select to sa[...]

22 ENG A djusting the Picture S et tings Your television has several settings which allow you to control picture quality: ◆ Color Tone, Contrast, Brightness, Sharpness, Color, Tint (NTSC only) 1 Press the MENU () button. Result: The Picture menu is displayed. 2 Press the œ or √ button. 3 Press the ▲ or ▼ button to select the Adjust , and t[...]

23 ENG If the signal received by your television is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU () button. Result: The Picture menu is displayed. 2 Press the œ or √ button. 3 Press the ▲ or ▼ button to select the Digital NR . 4 Select the re[...]

24 ENG You can select the picture format which best corresponds to your viewing requirements by simply pressing the “ P.SIZE ( ) ” (Picture size) button on the remote control. Depending on the model, the following picture formats are available in the order given: ◆ Normal ◆ Zoom (expansion of a 16:9 picture to full screen format) ◆ 16:9 S[...]

25 ENG Changing the S ound Standard You can select the type of special sound effect to be used when watching a given broadcast. The following sound effects are available in the order given: ◆ Custom, Standard, Music, Movie, Speech. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Sound and press the œ or √ button. Result[...]

26 ENG The sound settings can be adjusted to suit your personal preferences. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Sound and press the œ or √ button. 3 Press the ▲ or ▼ button to select the Adjust (or Equalizer ) and press the œ or √ button. Result: When select the Mode to Custom , the Adjust (or Equalize[...]

27 ENG Extra S ound S et tings (depending on the model) The following sound settings can be adjusted to suit your personal preferences. ◆ Auto Volume Each broadcasting station has its own signal conditions, and so it is not easy for you to adjust the volume every time the channel is changed. Auto Volume lets you automatically adjust the volume of[...]

28 ENG S electing the S ound Mode (depending on the model) The “ DUAL I-II ” button displays/controls the processing and output of the audio signal. When power is switched ON, the mode is automatically preset to either “ Dual- I ” or “ Stereo ” , depending on the current transmission. ➣ ◆ If the receiving conditions deteriorate, lis[...]

29 ENG S witc hing the S ound Of f T emporaril y You can switch the sound off temporarily, for example you may wish to answer the telephone. 1 Press the MUTE ( ) button. Result: The sound is switched off and “” is displayed. 2 When you wish to turn the sound back on at the same volume as before, press the MUTE ( ) button again (or either of the[...]

30 ENG You can select a time period of between 30 and 180 minutes after which the television automatically switches to Standby mode by pressing the “ SLEEP ( ) ” button. 1 Press the SLEEP ( ) button on the remote control. Result: If the sleep timer is... The screen displays... Already set Time remaining before the television will be placed in s[...]

31 ENG You can set the television ’ s clock so that the current time is displayed when you press the “ INFO ( ) ” button. You must also set the time if you wish to use the automatic On/Off timers. ➣ The clock setting will be re-activated when pressing the “” (ON/OFF) button on the front panel. 1 Press the MENU () button. 2 Press the ▲[...]

32 ENG You can set the On/Off timers so that the television will: ◆ Switch on automatically and tune to the channel of your choice at the time you select ◆ Switch off automatically at the time you select ➣ The first step is to set the television ’ s clock (refer to “ Setting and Displaying the Current Time ” on the previous page). If yo[...]

33 ENG You can restrict viewing by locking the channels of your choice. Example : You can prevent your children from watching unsuitable programmes. 1 Press the MENU () button. 2 Press the ▲ or ▼ button to select the Function and press the œ or √ button. 3 Press the ▲ or ▼ button to select the Child Lock and press the œ or √ button. R[...]

34 ENG Most television channels carry “ teletext, ” pages of written information that provide information such as: ◆ Television programme times ◆ News bulletins ◆ Weather forecasts ◆ Sports results ◆ Subtitles for the hard of hearing The teletext pages are organized according to six categories: Part Contents A Selected page number. B [...]

35 ENG Press the number buttons on the remote control to enter the page number directly: 1 Enter the three-digit page number listed in the contents by pressing the corresponding numeric buttons. Result : The current page counter is incremented and the page is then displayed. 2 If the selected page is linked with several secondary pages, the seconda[...]

36 ENG Up to four teletext pages can be stored. 1 Select the LIST mode. Result: Four 3-digit numbers are displayed in different colors at the bottom of the screen. 2 Press the colored button corresponding to the page that will be replaced. 3 Enter the new page number using the numeric buttons. 4 Repeat steps 2 and 3 for each page to be stored, usin[...]

37 ENG Before contacting Samsung after-sales service, perform the following simple checks. If you cannot solve the problem using the instructions below, note the model and serial number of the television and contact your local dealer. ◆ Check that the mains lead has been connected to a wall socket. ◆ Check that you have pressed the “” (ON/O[...]

38 ENG Wiring the Mains P o w er Suppl y Plug (UK Onl y) IMPORTANT NOTICE The mains lead on this equipment is supplied with a moulded plug incorporating a fuse. The value of the fuse is indicated on the pin face of the plug and, if it requires replacing, a fuse approved to BSI1362 of the same rating must be used. Never use the plug with the fuse co[...]

39 ENG Memo S56A_UI_ENG_EU 8/30/03 10:47 AM Page 39[...]

- AFTER SALES SERVICE - Do not hesitate to contact your retailer or service agent if a change in the performance of your product indicates that a faulty condition may be present. AA68-02970A-00 S56A_UI_ENG_EU 8/30/03 10:47 AM Page 40[...]