Samsung D53 Bedienungsanleitung

[...]

ŝ 1 Ş Getting to know your camera Instructions ƈ Use this camera in the following order Set up the camera driver Take a picture Insert the USB cable Check the camera’s power Check [Removable Disk] Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in A[...]

Danger W arning ŝ 2 Ş Caution WARNING indicates a potentially hazardous situation, which, if not avoided, could result in death or serious injury. ƈ Do not use the flash in close proximity to people or animals. Positioning the flash too close to your subject’s eyes may cause eyesight damage. ƈ For safety reasons keep this product and accessor[...]

ŝ 3 Ş Contents READY ƃ System chart 4 ƃ Identification of features 5 ƈ Front & Top 5 ƈ Back & Bottom 6 ƈ Bottom / 5-function button 7 ƈ Self-timer lamp 8 ƈ Camera Status Lamp 8 ƈ Mode icon 8 ƃ Connecting to a Power Source 8 ƈ Using the batteries 8 ƃ Inserting the memory card 9 ƃ Instructions on how to use the memory card 10 ƃ[...]

ŝ 4 Ş System chart Please check that you have the correct contents before using this product. The contents can vary depending on the sales region. To buy the optional equipment, contact your nearest Samsung dealer or Samsung service centre. Software CD (see p.65) Camera strap User manual, Product warranty Camera case Rechargeable battery (SNB-251[...]

ŝ 5 Ş Identification of features Flash Self-timer lamp / Auto focus lamp Strap eyelet Shutter button M(Mode) button Power button Speaker Microphone Lens / Lens cover Front & Top[...]

ŝ 6 Ş Identification of features Back & Bottom LCD monitor Tripod 5 function button E (Effects) button Play mode / Printer button Zoom T button (Digital zoom) Camera status lamp Zoom W button (Thumbnail) +/- button, Delete button USB / AV connection terminal[...]

ŝ 7 Ş Identification of features Bottom / 5-function button Battery chamber Battery chamber cover Voice memo / Voice Recording / Up button Flash / Left button Menu / OK button Self-timer / Right button Macro / Down button Play & Pause button Memory card slot[...]

ŝ 8 Ş Connecting to a Power Source Identification of features ƈ Self-timer lamp Icon Status Description For the first 8 seconds, the lamp blinks at 1 second intervals. For the final 2 seconds, the lamp blinks quickly at 0.25- second intervals. For the 2 seconds, the lamp blinks quickly at 0.25-second intervals before taking a picture A picture w[...]

ŝ 9 Ş Connecting to a Power Source Important information about battery usage ƃ When the camera is not used, turn off the camera power. ƃ Please remove the battery if the camera will not be used for long periods. Battery can lose power over time and are prone to leaking if kept inside the camera. ƃ Low temperatures (below 0˚C) can affect the p[...]

ƃ Be sure to format the memory card (see p.55) if you are using a newly purchased memory for the first time, if it contains data that the camera cannot recognise, or if it contains images captured with a different camera. ƃ Turn off the camera power whenever the memory card is being inserted or removed. ƃ Repeated use of the memory card will eve[...]

ŝ 11 Ş Instructions on how to use the memory card [ SD (Secure Digital) memory card ] Write protect switch Label Card pins ƈ The camera can use SD Memory Cards and MMC (Multi Media Cards). Please consult the enclosed manual for using the MMC Cards. The SD memory card has a write protect switch that prevents image files from being deleted or form[...]

ŝ 12 Ş When Using the Camera for the First Time ƈ Charge the rechargeable battery fully before using the camera for the first time. ƈ When the camera is turned on for the first time, a menu will be displayed to set date / time, language and battery type in the LCD monitor. This menu will not be displayed after setting up. Set up the date / time[...]

ŝ 13 Ş LCD monitor indicator [Image & Full Status] ں ڻ ڽ ڼ ھ ڿ ۀ ہ ؅ ۇ ۅ ۆ ؇ ؆ ؉ ؈ ۄ ۂ ۃ ؋ ؊ ڹ ƈ The LCD monitor displays information about the shooting functions and selections. No. Description Icons Page 4 Continuous shot p.33 5F lash p.21~23 6 Self-timer p.23 7 Macro p.20~21 8 Metering p.33 9 Card inserted indicator [...]

ŝ 14 Ş Changing the recording mode Starting the recording mode ƈ How to use the PROGRAM mode ( ) Selecting the automatic mode will configure the camera with optimal settings. You can still manually configure all functions except the aperture value and shutter speed. 1. Press the menu button to configure advanced functions such as image size (p.3[...]

ŝ 15 Ş Starting the recording mode ƈ How to use the MANUAL mode ( ) You can manually configure all functions with the aperture value and shutter speed. 1. Press the + / - button and menu for the shutter speed and aperture value will display. Up / Down button : changes aperture value Left / Right button : changes shutter speed. 2. Press the + / -[...]

ŝ 16 Ş [Night mode] [Portrait mode] [Children mode] ƈ Night / Portrait / Children mode - Night mode : Use this for still images at night or in other dark conditions - Portrait mode : To take a picture of a person - Children mode : To take a still picture of moving children ƈ How to use the SCENE mode ( ) Use the menu to easily configure optimal[...]

ŝ 17 Ş Starting the recording mode ƈ How to use the VOICE RECORDING mode ( ) 1. In any mode with the exception of Movie clip mode, select the VOICE RECORDING mode by pressing the Voice recording button twice. 2. Press the shutter button to record a voice. - Press the shutter button once and voice is recorded for as long as the available recordin[...]

ŝ 18 Ş Using the camera buttons to set the camera ZOOM W / T button ƈ The recording mode function can be set up by using the camera buttons. ƃ Used for turning the camera’s power on / off. ƃ If there is no operation during the specified time, the camera's power will be turned off automatically to save battery life. Refer to page 54 for [...]

ŝ 19 Ş ZOOM W / T button [ TELE zoom ] [ Optical zoom 2X ] [ WIDE zoom ] Pressing the ZOOM W button Pressing the ZOOM W button [ Digital zoom 5.0X ] [ TELE zoom ] [ WIDE zoom ] Pressing the ZOOM W button Pressing the ZOOM W button ƃ WIDE Zoom Optical zoom WIDE : Pressing the ZOOM W button. This will zoom out from the subject i.e. the subject wil[...]

ŝ 20 Ş V oice recording( ) / V oice memo( ) / UP button Macro( ) / Down button ƈ While the menu is showing, press the UP button to move up the submenu. When the menu is not displayed on the LCD monitor, the UP button operates as the voice recording or voice memo ( ) button. You can add your voice-over to a stored still image. Refer to page 17 fo[...]

ŝ 21 Ş Macro( ) / Down button ƈ Available focusing method, by recording mode (O: Selectable , X: Not selectable, ∞ : Infinity focus range) O OOO OOO XO O XXX O O XXX XXX Mode Normal Macro Auto macro Normal Macro Auto macro Mode SCENE ū X ūū O ū O XO XXX XX XX XX X X X ƈ To focus on a subject not positioned in the centre of the picture, us[...]

ŝ 22 Ş Menu tab Flash mode Description ƃ Flash mode indicator If the subject or background is dark, the camera flash will operate automatically. If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the red-eye reduction function. The flash fires regardless of available light. Th[...]

ŝ 23 Ş Flash ( ) / Left button ƃ Available flash mode, by recording mode XX O X XX X X X X X X X O XO O X XO O X XX X XXX XX O OXX X X XX X O XX XX O XO X X X XX X XXX OOO O OO O O O OO XO X ƈ When the menu is displayed on the LCD monitor, pressing the Right button makes the cursor shift to the right tab. ƈ When the menu is not displayed on th[...]

ŝ 24 Ş MENU / OK button E (Effect) button ƈ It is possible to add special effects to your images by using this button. ƈ Still image mode : You can select the colour, outfocus, composite and frame menus. ƈ Movie clip mode : You can select the colour menu. ƈ Available Effects, by recording mode (O : Selectable X : Not selectable) ſ This butto[...]

ŝ 25 Ş Special Effect : Colour 3. Select a desired sub menu by pressing the Up / Down button and press the OK button. : No effect is added to the image : Captured images will be stored in black and white. : Captured images will be stored in a sepia tone (a gradient of yellowish brown colours). : Captured images will be stored in a red tone. : Cap[...]

ŝ 26 Ş Special Effect : Preset focus frames Special Effect : Composite shooting ƈ You can combine 2 ~ 4 different shots in a still image. 1. Press the E button in any recording mode (except for MOVIE CLIP and AUTO mode). 2. Select the ( ) menu by pressing the Left / Right button. 3. Select a desired sub menu by pressing the Up / Down button and [...]

ŝ 27 Ş Special Effect : Composite shooting ƃ Changing a part of composite shot before taking the last shot Before taking the last composite shot, you can change a part of composite shot. 1. During the composite shots, press the + / - button. 2. A previous image will be deleted and new frame will display. If there is an image taken before, press [...]

ŝ 28 Ş Special Effect : Photo Frame + / - button ƈ You can use the + / - button to adjust the values for the RGB, ISO, white balance and exposure compensation. Main menu Sub menu Available camera mode RGB R (Red), G (Green), B (Blue) ISO AUTO, 50, 100, 200, 400 Exposure compensation -2.0~0.0~+2.0 (0.5EV steps) WHITE BALANCE AUTO, DAYLIGHT, CLOUD[...]

ŝ 29 Ş + / - button ƃ Selecting an ISO Sensitivity 1. Press the + / - button, and then use the UP and DOWN buttons to select the ISO icon( ). The ISO menu bar will appear as shown. 2. Use the LEFT and RIGHT buttons to select the desired ISO sensitivity value. - AUTO : The camera's sensitivity is automatically changed by variables such as li[...]

ŝ 30 Ş ƃ Using the Custom White Balance White balance settings may vary slightly depending on the shooting environment. You can select the most appropriate white balance setting for a given shooting environment by setting up the custom white balance. ƈ Exposure compensation : This camera automatically adjusts the exposure according to the ambie[...]

ŝ 31 Ş ƈ You can use the menu on the LCD monitor to set up recording functions. In any mode with the exception of VOICE RECORDING mode, pressing the MENU button displays the menu on the LCD monitor. ſ The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is [...]

ŝ 32 Ş Size Quality / Frame rate [ STILL IMAGE mode ] QUALITY Super Fine Fine Normal [ MOVIE CLIP mode ] FRAME RATE 30FPS 15FPS ƈ You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Icon Sub menu Super Fine Fine Normal 30FPS 15FPS File Form[...]

ŝ 33 Ş ƈ If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. [Multi] : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. [Spot] : Only[...]

ŝ 34 Ş Sharpness OSD (On Screen Display) information ƈ Idle mode : If you select the [LCD Save] and the camera isn't operated during the specified time(about 30 SEC.), the camera power will be idle (LCD monitor : OFF, Camera status lamp : Blinking) automatically. - To use the camera again, press any of the camera buttons except the power bu[...]

ŝ 35 Ş ƃ Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip and press the Play & Pause button ( ) to play back. - To pause a movie clip file while playing it back, press the play & pause button again. - Pressing the play & pause button again will cause the movi[...]

ŝ 36 Ş Starting play mode ƃ Playing back a recorded voice Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded voice file and press the Play & Pause button ( ) to play back a recorded voice file. - To pause a recorded voice file, while playing it back, press the play & pause button again. - To resume pl[...]

ŝ 37 Ş Thumbnail( ) / Enlargement ( ) button ƃ Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnail button will zoom back to the original full sized image. - You can tell whether the image displaye[...]

ŝ 38 Ş Thumbnail( ) / Enlargement ( ) button ƃ The maximum enlargement rate in proportion to the image size. ƃ Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function b[...]

ŝ 39 Ş E (Effect) button ƈ It is possible to add special effects to your images by using this button. ſ The changed image is saved in a new file name. Exit:E 1. Select a still image or movie clip and press the E button. 2. Select a desired sub menu and press the OK button. : Captured images will be stored in black and white. : Captured images w[...]

ŝ 40 Ş Delete ( ) button ƈ This deletes images stored on the memory. ƃ Deleting Images in Play Mode 1. Select an image that you want to delete by pressing the LEFT / RIGHT button and press the DELETE( ) button. 2. A message will display as shown alongside on the LCD monitor. 3. Select the sub menu values by pressing the LEFT / RIGHT button and [...]

ŝ 41 Ş ƈ PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. To capture an image after setting up the play menu, press the PLAY mode button or shutter button. Menu tab Main menu Sub menu Secondary menu P[...]

ŝ 42 Ş Setting up the play back function using the LCD monitor Menu tab Main menu Sub menu Secondary menu Page Right 90° - Left 90° - 180° - Horizontal - Vertical - Standard Select / All Pics / Cancel DPOF Index No / Yes p.46 Size Select / All Pics / Cancel No - Yes - Full - Basic - OSD Off - p.49 p.48 p.46 ROTATE COPY TO CARD OSD INFORMATION [...]

ŝ 43 Ş ƃ Start the slide show : The slide show can start only in the [Show] menu. 1. Use the Up / Down buttons to select the [Show] menu and press the Right button. 2. Select a desired sub menu by pressing the Up / Down button. [Play] : The slide show is closed after one cycle. [Repeat Play] : The slide show is repeated until cancelled. 3. To sa[...]

ŝ 44 Ş Starting the slide show ƃ Configure slide show effects : Unique screen effects can be used for the slide show. 1. Select the [Effect] sub menu by pressing the UP / DOWN button and press the RIGHT button. 2. Use the Up / Down button to select the type of effect. : Normal display. : Image is displayed slowly. : Image is displayed slowly fro[...]

ŝ 45 Ş ƈ Change the resolution (size) of pictures taken. Select the [User Image] to save an image to be the start-up image. The resized image will have a new file name. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP / DOWN[...]

ŝ 46 Ş Rotating an image ƈ You can rotate the stored images by various degrees. Once the playback of the rotated picture is finished, it will switch back to the original state. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [ROTATE] menu tab. 3. Select a desired sub menu by pressing the U[...]

ŝ 47 Ş DPOF : Index ƈ Images (except for movie clips and voice file) are printed as index type. 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT button and select the [DPOF] menu tab. 3. Select the [Index] menu by pressing the UP / DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing [...]

ŝ 48 Ş DPOF : Print size ƈ You can specify the print size when printing images stored on the memory card. The [Size] menu is available only for DPOF 1.1 compatible printers. ſ DPOF [Size] secondary menu : Cancel, 3X5, 4X6, 5X7, 8X10 ƃ Setting the Print Size 1. Press the play mode button and press the menu button. 2. Press the LEFT / RIGHT butt[...]

ŝ 49 Ş PictBridge ƈ You can use the USB cable to connect this camera to a printer that supports PictBridge (sold separately) and print the stored images directly. Movie clips and voice files cannot be printed. ƃ Setting up the camera for connection with the printer 1. In any mode with the exception of Voice Recording mode, press the MENU button[...]

ŝ 50 Ş PictBridge : Picture Selection ƈ Easy printing When you connect the camera to printer in the Play back mode, you can print a picture easily. - Pressing the printer( ) button : Currently displayed image will be printed with the printer’s default setting. - Pressing the Left / Right button : Selects a previous / next image. ƈ Select pict[...]

ŝ 51 Ş PictBridge : Printing ƈ Printing Pictures 1. Use the LEFT and RIGHT buttons to select the [PRINT] menu tab. 2. Use the UP and DOWN buttons to select the desired sub menu value, and then press the OK button. [Standard] : Print the pictures stored in the memory card in set numbers. One picture is printed on one piece of paper. [Index] : Pri[...]

ŝ 52 Ş Setup menu Menu tab Main menu Sub menu Secondary menu Page Series - Reset - Off, 1, 3, 5, 10 min - p.54 No - Yes - 06/01/01 13:00 - yy/mm/dd - Off - dd/mm/yy - mm/dd/yy - Off - Date - Date&Time - Off - Low - Medium - High - ENGLISH FRANÇAIS DEUTSCH ESPAÑOL ITALIANO PORTUGUÊS DUTCH DANSK SVENSKA SUOMI BAHASA POLSKI Magyar -- File Pow[...]

ŝ 53 Ş ſ Menus are subject to change without prior notice. Menu tab Main menu Sub menu Secondary menu Page Computer - Printer - Off - On - Dark - Normal - Bright - NTSC - PAL - Quick View Off / 0.5, 1, 3 sec - p.57 No - Yes - Alkaline - Ni-MH - AF Lamp LCD Video Out Reset Battery type p.56 p.56 p.57 p.58 p.58 USB p.56 Setup menu ƃ Assigning Fil[...]

[ Language ] ƈ There is a choice of languages that can be displayed on the LCD monitor. Even if the battery is removed and inserted again, the language setting will be preserved. - LANGUAGE sub menu : English, Korean, French, German, Spanish, Italian, S.Chinese, T.Chinese, Japanese, Russian, Portuguese, Dutch, Danish, Swedish, Finnish, Thai, BAHAS[...]

ŝ 55 Ş [ Formatting a memory ] ƈ This is used for formatting the memory. If you run [Format] on the memory, all images, including the protected images, will be deleted. Be sure to download important images to your PC before formatting the memory. ƃ Sub menus [No] : The memory will not be formatted. Press the menu button three times and the menu[...]

[ Auto Focus lamp ] ƈ You can turn on and off the Auto Focus lamp. ƃ Sub menus [Off] : The AF lamp will not light up in a low light condition. [On] : The AF lamp will light up in a low light condition. [ LCD brightness ] ƈ You can adjust the LCD brightness. ƃ [LCD] sub menu : Dark, Normal, Bright SETUP Date&Time Imprint Sound USB AF Lamp Ba[...]

ŝ 57 Ş [ Selecting Video out type ] ƈ The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. ƈ Connecting to an external monitor Connect the camera to an external monitor with the AV cable(Op[...]

Setting up the Mycam menu Start up image ƈ You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MyCAM menu. The items indicated by are default settings. Menu tab Main menu Sub menu Page Off LOGO User Image 1 User Image 2 Off Sound 1 Sound 2 Sound 3 Off Sou[...]

ŝ 59 Ş Start up sound Shutter sound ƈ You can select the sound that is activated whenever the camera is turned on. ƃ Start up sound : [Off], [Sound 1], [Sound 2], [Sound 3] - If the start up image is set to [Off], the start up sound will not activate, even though you may have set these to on. ƈ You can select the shutter sound. ƃ Shutter soun[...]

Important notes ƈ Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do not allow this camera to come into contact with solvent materials such as benzol, insecticide[...]

ŝ 61 Ş W arning indicator ƈ There are several warnings that may appear on the LCD display Card Error! Ү Memory card error ƍ Turn off the camera power and turn it on again ƍ Insert the memory card again ƍ Insert the memory card and format the memory card. (p.55) Card Locked! Ү The memory card is locked ƍ SD memory card : Slide the write pro[...]

Before contacting a service centre The flash does not fire Ү Flash off mode has been selected ƍ Dis-engage flash off mode Ү The camera mode can’t use the flash ƍ Refer to the FLASH instruction (p.21) Incorrect date and time is displayed Ү The date and time have been set incorrectly or the camera has adopted the default settings ƍ Reset the [...]

ŝ 63 Ş Before contacting a service centre No image on external monitor Ү The external monitor has not been connected properly with the camera ƍ Check the connection cables Ү There are incorrect files in the memory card ƍ Insert a memory card that has correct files When using the PC’s explorer, the [Removable Disk] file does not show Ү Cabl[...]

Specifications - Capacity (20 MB) * These figures are measured under Samsung Ŗ s standard conditions and may vary depending on shooting conditions and camera settings ƈ Image Play - Type : Single image, Thumbnails, Slide show, Movie Clip - Editing : Trimming, Resizing, Rotate, Effect ƈ Interface - Digital output connector : USB 2.0 Full Speed - [...]

ŝ 65 Ş About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. ƈ Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driv[...]

ŝ 66 Ş About the software Setting up the application software ƈ To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. ƈ You can visit the Samsung web-site through the internet. http://www.samsungcamera.[...]

ŝ 67 Ş Setting up the application software 4. Turn the camera power on. The [Found New Hardware Wizard] will open and the computer will recognize the camera. ſ If your OS is Windows XP, an image viewer program will open. If the download window of Digmax Master opens after starting Digimax Master, the camera driver was setup successfully. 3. Afte[...]

ŝ 68 Ş ƈ Connecting the camera to a PC ƈ Disconnecting the camera and PC : Refer to page 70 (Removing the removable disk). ſ If you selected [Printer] in Step 4, when you connect the camera to your printer, the [Connecting Printer] message will display and the connection will not be established. In this case, disconnect the USB cable, and then[...]

ŝ 69 Ş Starting PC mode ƈ Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit them. 1. Connect the camera to your PC with the USB cable. 2. On your computer's desktop display, select [My computer] and double click [Removable Disk [...]

ŝ 70 Ş 6. A [Unplug or Eject Hardware] window will open. Click the [Close] button and the removable disk will be removed safely. 7. Unplug the USB cable. Removing the removable disk ƈ Windows 98SE 1. Check whether the camera and PC are transferring a file. If the camera status lamp blinks, please wait until the lamp has finished blinking and is [...]

ŝ 71 Ş Setting up the USB Driver for MAC 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS version during start-up. This camera is compatible with MAC OS 9.2 ~ 10.3. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be displayed on the deskt[...]

ŝ 72 Ş ƃ Image viewer : You can view the stored images. ڹ ڽ ھ ڿ ں ڻ ڼ - Image viewer functions are listed below. ڹ Menu bar : You can select menus. File, Edit, View, Tools, Change functions, Auto download, help, etc. ں Image selection window : You can select the desired images in this window. ڻ Media type selection menu : You can selec[...]

ŝ 73 Ş Digimax Master ƃ Image edit : You can edit the still image. ڹ ں ڻ ڼ - Image edit functions are listed below. ڹ Edit menu : You can select the following menus. [Tools] : You can resize or crop the selected image. See the [Help] menu. [Adjust] : You can modify image quality. See the [Help] menu. [Retouch] : You can change image or inse[...]

ŝ 74 Ş Case 6 When I open the Device Manager (by clicking Start ƍ (Settings) ƍ Control Panel ƍ (Performance and Maintenance) ƍ System ƍ (Hardware) ƍ Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. ƍ Right-click on the entry wi[...]

ŝ 75 Ş FA Q ƃ When the DirectX 9.0 or later is not installed ƍ Install the DirectX 9.0 or later 1) Insert the CD provided with the camera 2) Run the windows explorer and select the [CD-ROM drive: USB DriverDirectX 9.0] folder and click the DXSETUP.exe file.The DirectX will be installed. Visit the following site for downloading the DirectX.htt[...]

MEMO ŝ 76 Ş FCC notice ƈ ƈ NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to pro-vide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequ[...]

SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWONGU, SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : ( 82 ) 31-740-8086, 8088, 8090, 8092, 8099 FAX : ( 82 ) 31-740-8398 www.samsungcamera.com SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : ( 1 ) 201-9[...]