Samsung DE46C Bedienungsanleitung

User Manual DE40C DE46C DE55C The color and the appearance may differ depending on the product, and the speci fications are subject to change without prior notic e to improve the performance. BN46-00299A-02[...]

Table Of Cont ents 2 Table Of Contents BEFORE USING THE PRODUCT 12 Copyright 13 Cleaning 13 Storage 14 Safety Precautions 14 Symbols 15 Electricity and Safety 16 Installation 18 Operation PREPARATIONS 23 Checking the Contents 23 Removing the Packaging (for DE40C and DE46C models only) 24 Removing the Packaging (for DE55C models only) 25 Checking th[...]

Table Of Contents Table Of Cont ents 3 CONNECTING AND USING A SOURCE DEVICE 56 Before Connecting 56 Pre-connection Checkpoints 57 Connecting and Using a PC 57 Connecting to a PC 60 Changing the Resolution 62 Connecting an External Monitor 63 Connecting to a Video Device 63 Connection Using the AV Cable 63 Connection Using the Component Cable 64 Con[...]

Table Of Contents Table Of Cont ents 4 73 What is MDC? 73 Connecting to MDC 75 Connection Manag ement 76 Auto Set ID 77 Cloning 78 Command Retry 79 Getting Started with MDC 81 Main Screen Layout 82 Menus 84 Screen Adjustment 87 Sound Adjustment 88 System Setup 97 Tool Settings 100 Other Functions 105 Troubleshooting Guide SCREEN ADJUSTMENT 107 Pict[...]

Table Of Contents Table Of Cont ents 5 113 Advanced Settings 114 Dynamic Contrast 114 Black Tone 114 Flesh Tone 114 RGB Only Mode 114 Color Space 114 White Balance 114 10p White Balance ( Off / On ) 115 Gamma 115 Expert Pattern 115 Motion Lighting ( Off / On ) 116 Picture Options 117 Color Tone 117 Color Temp. 117 Digital Noise Filter 117 MPEG Nois[...]

Table Of Contents Table Of Cont ents 6 NETWORK 126 Network Setting 126 Connecting to a Wired Network 127 Wired Network Settings 130 Connecting to a Wireless Network 131 Wireless Network Setting 133 WPS(PBC) 134 Network Status 135 MagicInfo Lite Settings 136 Wi-Fi Direct 136 Soft AP 137 AllShare Settings 137 Using the AllShare Play Function 138 Devi[...]

Table Of Contents Table Of Cont ents 7 146 Caption 146 Caption 146 Caption Mode 147 Digital Caption Options 148 Security 148 Safety Lock ( Off / On ) 148 Button Lock ( Off / On ) 149 Program Rating Lock ( Off / On ) 151 Change PIN 151 PIP 152 Auto Protection Time 153 Screen Burn Protection 153 Pixel Shift 154 Timer 154 Immediate Display 155 Side Gr[...]

Table Of Contents Table Of Cont ents 8 159 General 159 Max. Power Saving 159 Game Mode 160 BD Wise 160 Menu Transparency 160 Sound Feedback 160 Auto Power 160 Standby Control 161 Lamp Schedule 161 OSD Display 161 Power On Adjustment 161 Temperature Control 162 Anynet+ (HDMI-CEC) 162 Anynet+ (HDMI-CEC) 163 Auto Turn Off ( No / Yes ) 165 DivX® Video[...]

Table Of Contents Table Of Cont ents 9 ALLSHARE PLAY 173 What is AllShare Play? 173 Read the following before using AllShare Play with a USB device 175 Using a USB device 176 Connecting to a PC over a network 177 Using the DLNA features 178 Using the Basic A llShare Play Features 178 Sorting the file lists 179 Playing Selected Files 179 Copying Fil[...]

Table Of Contents Table Of Cont ents 10 195 MagicInfo Lite Player 195 Network Schedule 200 Local Schedule 201 Internal AutoPlay 202 USB AutoPlay 203 Local Schedule Manager 203 Registering a Local Schedule 207 Modifying a Local Schedule 209 Deleting a Local Schedule 210 Running a Local Schedule 211 Stopping a Local Schedule 212 Viewing the details o[...]

Table Of Contents Table Of Cont ents 11 SPECIFICATIONS 228 General 230 PowerSaver 231 Standard Signal Mode Table 233 License APPENDIX 234 Contact SA MSUNG WORLD WIDE 236 Responsibility for the Pay Service (Cost to Customers) 236 Not a product defect 236 A Product damage caused by customer's fault 236 Others 237 Optimum Picture Qu ality and Aft[...]

12 Before Using the Product Before Using the Product Copyright The content s of this man ual are sub ject to cha nge without n otice to im prove qual ity. © 2012 Samsung Electronics Samsung Electro nics owns the copyrigh t for this manual. Use or reproduction of this manual in part s or entirety with out the autho rization of Samsung Electronic s [...]

13 Before Using the Product Before Using the Product Cleaning Exercise care when cleaning as the panel and e xterior of ad vanced LCDs ar e easily scratche d. Take the following steps when c leaning. The following images are for reference only. Real-life situations may differ from what is shown in the images. Storage High-glossy models can develo p[...]

14 Before Using the Product Before Using the Product Safety Precautions Symbols CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTR IC SHOCK, DO NOT REMOVE COVER (OR BACK). THERE ARE NO USER SERVICEABLE PARTS INSIDE. REFER ALL SERVICING TO QUALIFIED PERSONNEL. This symbol indicat es that high vo ltage is presen t insid[...]

15 Before Using the Product Before Using the Product Electricity and Safety The following images are for reference only. Real-life situations may differ from what is shown in the images. Warning Do not use a damage d power cor d or plug, o r a loos e power s ocket.  An electric shock or fire may re sult. Do not use m ultiple pr oducts with a sin[...]

16 Before Using the Product Before Using the Product Caution Installation Warning Do not disconnect the power cord wh ile the prod uct is being used.  The product may become damage d by an electric sho ck. Only use the p ower cord pr ovided with your produc t by Samsung. Do not use t he power cord with other pro ducts.  A fire or electric sho[...]

17 Before Using the Product Before Using the Product Keep the plastic packa ging out of the reac h of children.  Children may suffoca te. Do not install t he product on an unst able or vibrating surfac e (insecure shelf, sloped surfa ce, etc.)  The product may fall and become dam aged and/o r cause an injury.  Using the produ ct in an area[...]

18 Before Using the Product Before Using the Product Caution Operation Warning Do not drop the product while m oving.  Product failure o r person al injury may result. Do not set down the product on it s front.  The screen may beco me damaged. When installing the pr oduct on a cabi net or shelf, make su re that the bottom edge of th e front o[...]

19 Before Using the Product Before Using the Product If the product ge nerates abnorma l sounds, a burning smell or smoke, discon nect the power co rd immediate ly and contac t Samsung Custo mer Service Ce nter.  An electric shock or fire may re sult. Do not let childre n hang from the pr oduct or cli mb on top of it.  Children may become inj[...]

20 Before Using the Product Before Using the Product Caution Ensure the vents are not b locked by t ablecloths or curtains.  An increased inter nal tempe rature may cau se a fire. Do not insert m etallic objects (c hopsticks, coins, h airpins, etc) or objects that burn easily (paper, mat ches, etc) in to the prod uct (via the vent or input/outpu[...]

21 Before Using the Product Before Using the Product Looking at the screen too close for an exte nded period of time ca n deteriorate your eyes ight. Do not use humidifi ers or stoves ar ound the pr oduct.  A fire or electric shoc k may result. Rest your eye s for mor e than 5 minu tes for ev ery 1 hour of product use.  Eye fatigue will be re[...]

22 Before Using the Product Before Using the Product When replacing the battery, inser t it with the rig ht polarity (+, -).  Otherwis e, the bat tery may beco me dama ged or it ma y cause fire , personal injury or damage due to leak age of th e internal liquid. The batteries (and recharge able batteri es) are not ordi nary refuse and must be re[...]

23 1 Preparations 1 Preparations 1.1 Checking the Contents The appearance of the actual product may differ from the images shown. 1.1.1 Removing the Packaging (for DE40C and DE46C models only) 1 Open the packaging b ox. Be careful not t o damage the prod uct when you open t he packaging with a sharp instrum ent. 2 Remove the sty rofoam fr om the pr[...]

24 Preparations 1 1 Preparations 1.1.2 Removing the Packagin g (for DE55C models only) 1 Remove the blac k locking device at the bottom of the box. 2 Using the grooves in the bo x, lift and remove the t op of the box. 3 Check the compo nents and re move the styrofoam an d plastic bag . The appearance of actual components may differ from the image s[...]

25 Preparations 1 1 Preparations 1.1.3 Checking the Components  Contact the vendor where you purchased the product if any components are missing.  The appearance of the components and items sold separately may differ from the image shown.  A stand is not provided with the product. To install a stand, you can purchase one separately. Compon[...]

26 Preparations 1 1 Preparations Items sold separately  The stand is not supplied.  The following items can be purchased at your nearest retailer. Wall-mount Kit Stand RS232C-Stereo cable DVI cable HDMI-DVI cable DP cable HDMI cable Video cable Component c able Stereo cable AV cable RCA stereo cabl e External sensor Kit Network Box PIM LAN ca[...]

27 Preparations 1 1 Preparations The RS232C adapter can be used to connect to another monito r using the D-SUB (9-pin) type RS232C cable. Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. RS232C(OUT) Adapter RS232C(IN) Adapter[...]

28 Preparations 1 1 Preparations 1.2 Parts 1.2.1 Control Pa nel Panel Key The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Power on the p roduct. If you press the [ ] button wh en the pro duct is turne d on, the control menu will be displaye d. To[...]

29 Preparations 1 1 Preparations Control menu If you press the [ ] button on the panel key ("1.2 Parts") when the product is turned on, the control menu will be displayed. Icons Description Select the connected input source. Move the panel key right to select Source [ ] in the control menu. When the list of input source s is displayed, mo[...]

30 Preparations 1 1 Preparations 1.2.2 Reverse Side The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Port Descriptio n [RS232C IN] Connects to M DC using an R S232C-stereo ca ble. [RS232C OUT] [IR / AMBIENT SENSOR IN] Supplies power t o the externa l sensor boar d or[...]

31 Preparations 1 1 Preparations Assembling the Holder-Wire stand 1.2.3 Anti-theft Lock  An anti-theft lock allows you to use th e product securely even in public places.  The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. To lock an anti-th[...]

32 Preparations 1 1 Preparations 1.2.4 Remote Control  Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled.  Remote control button functions may differ for different products. Power off the product. Return to the previous menu. Change the channe[...]

33 Preparations 1 1 Preparations Adjusting the OSD with the Remote Control To place batteries in the remote control 1. Open the OS D menu. 2. Select from Picture , Sound , Channel , Network , System or Support in the displayed OSD menu screen. 3. Chang e settings as desired. 4. Finish setting. 5. Close the onscree n display (OSD) menu. 1 3 2[...]

34 Preparations 1 1 Preparations Remote Control Reception Range Use the remo te control with in 7m to 10 m from th e sensor on t he produ ct at an ang le of 30˚ fro m the le ft and right.  Store used batteries out of reach of children and recycle.  Do not use a new and used battery together . Replace both batteries at the same time.  Remo[...]

35 Preparations 1 1 Preparations 1.2.5 Connection Using an IR Stereo Cable Turn off the device before connecting the External Sens or Kit. After it is connected, turn on the device. Controlling more than one display pr oduct using your remote control  Connect the [ IR OUT] port on the pr oduct to th e [IR / AMBIEN T SENSOR IN ] port on th e othe[...]

36 Preparations 1 1 Preparations 1.3 Before Installing the Product (Installation Guide) To prevent injury, this apparatus must be securely attached to the floor/wall in accordance with the installation instructions.  Ensure that an authorized installa tion company installs the wall mount.  Otherwise, it may fall and cause personal injury. [...]

37 Preparations 1 1 Preparations 1.3.2 Ventilation 1. Installation on a Perpendicula r Wall 2. Installation on an I ndented Wall Contact Samsung Customer Service Center for further details. When installing the product on an indented wall, al low at least the space specified above between the product and wall for ventilation and ensure th at the amb[...]

38 Preparations 1 1 Preparations 1.4 Dimensions Unit: mm (inches) All drawings are not necessarily to scale. Some dimensions are subject to change without prior notice. Refer to the dimensions prior to performing installation of your prod uct. Not responsible for typographical or printed errors. 1 2 3 4 5 Model name DE40C 919.6 (36.2) 885.6 (34.9) [...]

39 Preparations 1 1 Preparations 1.5 Installing the Wall Mount 1.5.1 Preparing before installing Wall-Mount 1.5.2 Installing the Wall Mount Kit The wall mount kit (sold separately) allow s you to mount the product on the wall. For detailed informatio n on installing the wall moun t, see the instructions prov ided with the wall mount. We recommend y[...]

40 Preparations 1 1 Preparations Unit: mm (inches) Do not install your Wall Mount Kit wh ile your product is turned on. It may result in personal injury due to electric shock.  Standard dimensions for wall mount kits are shown in the table below.  Samsung wall mount kits contain a detailed installation manual and all parts necessary for assem[...]

41 Preparations 1 1 Preparations 1.6 Remote Control 1.6.1 Cable Connection RS232C Cable  Pin assignment Interface RS232C (9 pins) Pin TxD (No. 2), Rx D (No. 3), GND (N o. 5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow control None Maximum length 15m (only shielded type) Pin Signal 1 Detect d ata car rier 2 Received data 3 T[...]

42 Preparations 1 1 Preparations  RS232C cable Connector: 9-Pin D-Sub to Stereo Ca ble LAN Cable  Pin assignment -P1- -P1- -P2- -P2- Female Rx Tx Gnd 2 3 5 --------> <-------- --------- 1 2 3 Tx Rx Gnd STEREO PLUG (3.5ø) Pin No. Standa rd Col or Sig nal 1 White and orange TX+ 2 Orange TX- 3 White and gree n RX+ 4 Blue NC 5 White and bl[...]

43 Preparations 1 1 Preparations  Connector: RJ45 Direct LAN cable (PC to HUB) Cross LAN cable (PC to PC) Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ TX- 2 <-- ------> 2 T X- RX+ 3 <--------> 3 RX+ RX- 6 <--------> 6 RX- Signal P1 P 2 Signal TX+ 1 <--------> 3 R X + TX- 2 <--------> 6 RX- RX+ 3 <-------->[...]

44 Preparations 1 1 Preparations 1.6.2 Connection  Connection 1  Connection 2 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT RJ45 RJ45[...]

45 Preparations 1 1 Preparations  Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

46 Preparations 1 1 Preparations 1.6.3 Control Codes Viewing control state (Get control command) Controlling (Set control command) Command  Issued IDs can be displayed in hexadecimals. However, ID 0 must be displayed as 0xFF.  All communications take place in hexadecima ls. The checksum is calculated by adding u p all values except the he ade[...]

47 Preparations 1 1 Preparations  To control all de vices connecte d by a serial ca ble simultaneous ly irrespective of IDs, set the ID as "0xFE" and transm it commands. Co mmands will b e executed by each device but ACK will not respond. Power control  Function A product ca n be powere d on and off using a PC.  Viewing power sta[...]

48 Preparations 1 1 Preparations Volume control  Function The volume o f a product can be adjuste d using a PC .  Viewing volume sta te (Get Volume Stat us)  Setting the vo lume (Set Volu me) "Volume": Volume value code to be se t on a prod uct (0-100)  Ack "Volume": Volume value code to be se t on a prod uct (0-100)[...]

49 Preparations 1 1 Preparations Input source control  Function The input s ource of a p roduct can be change d using a PC .  Viewing input sour ce state (Get Input Source Stat us)  Setting the in put source (Set Input Sour ce) "Input Source ": An input sou rce code to be set on a produ ct  DVI_video and HDMI1_PC cannot be use[...]

50 Preparations 1 1 Preparations "ERR": A code show ing what error has occurred Screen  Function The screen mode of a product can be chang ed using a PC. Screen mode cannot b e controlled w hen the Video Wall function is enabled. This control can only be used on models that include a TV.  Viewing scree n status (Get Screen Mode Stat[...]

51 Preparations 1 1 Preparations Screen size control  Function The screen size of a pro duct can b e changed using a PC.  Viewing the screen size (Ge t Screen Size Stat us)  Ack "Screen Size": pro duct screen size (range: 0 – 255, un it: inch)  Nak "ERR": A code show ing what error has occurred Header Command ID Da[...]

52 Preparations 1 1 Preparations PIP On/Off control  Function The PIP mode o f a product can be tu rned on or off using a PC.  Only available on models that have the PIP function.  The mode cannot be controlled if Video Wall is set to On .  This function is not available in MagicInfo .  Viewing PIP on/off state (Get the PIP ON / OFF [...]

53 Preparations 1 1 Preparations Auto adjustment control (PC and BNC only)  Function Automatically ad just the PC system screen usin g a PC.  Viewing auto adjustm ent state (Get Auto Adjustmen t Status) None  Setting auto adjustment (Set Auto Adjustm ent) "Auto Adjustment" : 0x00 (at all times)  Ack  Nak "ERR": A [...]

54 Preparations 1 1 Preparations Video Wall Mode Control  Function Video Wall mode c an be activa ted on a pr oduct using a PC. This contro l is only available on a pro duct whos e Video Wall is enabled. This function is not available in MagicInfo .  Viewing video wall mode (Get Video Wall Mode)  Setting the video wall (Set Video Wall Mode[...]

55 Preparations 1 1 Preparations Safety Lock  Function PC can be us ed to turn t he Safety Loc k function on or off on a product. This contro l is available regardless o f whether or not the power is tur ned on.  Viewing the saf ety lock state (G et Safety Lock Status)  Enabling or disabling safety lock (S et Safety Lock Ena ble / Disable)[...]

56 2 Connecting and Us ing a Source Device 2 Connecting and Using a Source Device 2.1 Before Connecting Check the follo wing before you connect this pro duct with other devices. Devices that can be conn ected to this p roduct include PCs, camcor ders, speake rs, set top boxes and DVD/Blu-ray Disc players. 2.1.1 Pre-connection Checkpoints  Before[...]

57 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2 Connecting and Using a PC 2.2.1 Connecting to a PC  Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable.  A PC can be conne cted to the product in a variety o f [...]

58 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an HDMI-DVI Cable When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. Connection Using an HDMI Cable RGB / DVI / HDMI / AV / COMPONENT AUDIO IN HDMI IN HDMI IN[...]

59 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Connection Using an DP Cable DP IN[...]

60 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.2.2 Changing the Resolution Adjust the resolution and refresh rate in Control Panel on your PC to obtain optimum picture quality. The picture quality of TFT-LCDs may degrade if the optimum resolution is not selecte d. Changing the Resolution on Windows XP Go to Cont[...]

61 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device Changing the Resolution on Windows 7 Go to Control P anel Display Screen Resolution , and chan ge the resolution. 12 34[...]

62 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.3 Connecting an External Monitor The following images are for reference only. Real-life situations may differ from what is shown in the images. DP IN DP OUT[...]

63 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4 Connecting to a Video Device  Do not conne ct the power cable bef ore conne cting all oth er cables. Ensure you conne ct a source device first be fore connec ting the power cable.  You can con nect a vide o device to th e produc t using a c able.  Connect[...]

64 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.4.3 Connection Usin g an HDMI-DVI Cable  Audio will not be enabled if the product is conn ected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a [...]

65 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device  Be sure to use an HDMI cable with a thickness of 14 mm or le ss.  Be sure to purc hase a certified HDMI cable. Ot herwise, the p icture may not d isplay or a conne ction error may o ccur.  A basic high-speed HD MI cable or one with eth ernet is recom mended.[...]

66 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.5 Connecting the network box (Sold separately) 2.5.1 MagicInfo To use MagicInfo , a netwo rk box (sold se parately ) must be c onnected to the produc t. For details on how to connect to a network box, refer to the user's manual provided with the network box upo[...]

67 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 3 Select the d efault applic ation you want to r un when MagicIn fo starts. 4 Enter the IP in formation. MagicInfo Setup Wizard - v .1.12 Select Application - step 1 MagicInfo Pro (LAN, W AN based version) MagicInfo-i Premium (Web-based version) Select Later < Back[...]

68 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 5 Select a language. (T he default la nguage is English .) 6 Select a display mode . MagicInfo Setup Wizard - v .1.12 Select Language -step 3 Select the language you want to install on the system for menus and dialogs. Current Language : Engilsh German English French [...]

69 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 7 Double-check the settings yo u have just co nfigured. If the execution icon does not appear, double-click the MagicInfo icon on the desktop. The icon will appear at the bottom right of the screen. MagicInfo Setup Wizard - v .1.12 Setup Information 1. Application : M[...]

70 Connecting and Using a Source Device 2 2 Connecting and Us ing a Source Device 2.6 Changing the Input source 2.6.1 Source MENU [] Support Contents Home Source ENTER [ ] Source allows you to select a variety of sources an d change so urce device n ames. Source You can display the screen of a source device connec ted to the p roduct. Select a sour[...]

71 3 Using MDC 3 Using MDC MDC (Multiple Display Contr ol) is an applicati on that allows you to eas ily control multi ple display devices simultaneously using a PC. 3.1 Configuring Settings for Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 3.1.1 Configuring settin gs for Multi Control  ID Setup As[...]

72 Using MDC 3 3 Using MDC 3.2 MDC Program Installation/Uninstallation 3.2.1 Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not di splayed on the main screen, install with the MDC Unified execution file in the MDC folder on the CD. 3 Select a lang u[...]

73 Using MDC 3 3 Using MDC 3.3 What is MDC? Multiple display control "MDC" is an application that allows you to easily control mu ltiple display devices simultaneously us ing a PC. 3.3.1 Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C ser ial cable mus t be connec ted to the se rial ports on t he [...]

74 Using MDC 3 3 Using MDC Using MDC via Ethernet Enter the IP for the prima ry display devic e and conne ct the de vice to the PC. One d isplay device c an connect to an other using an RS-232C serial ca ble. Connection using a direct LAN cable Multiple products can be connected using the [RJ45] port on the product and the LAN ports on the HUB. Con[...]

75 Using MDC 3 3 Using MDC 3.3.2 Connection Management Connection m anagement includes th e Connect ion list and Connection list modification opt ions . Connection list - Connection list shows the det ails of the connec tions such as c onnection setting (IP/ COM, Port No, MAC, and Conn ection T ype ), co nnection st atus, Set ID Ra nge , and detect[...]

76 Using MDC 3 3 Using MDC 3.3.3 Auto Set ID Auto Set ID feature assigns a Set ID fo r all the LFDs connected in d aisy-chain of a sele cted connection. There can b e a maximu m of 100 L FDs in a conn ection. Th e Set ID is a ssigned sequ entially in the da isy- chain runnin g from 1 to 99, and then finally to Se t ID 0.[...]

77 Using MDC 3 3 Using MDC 3.3.4 Cloning Using the Cloning feature, you can copy the settin g of one LFD and ap ply it to mu ltiple selected LF Ds. You can select specific tab cat egories or all t ab categories fo r cloning, using the copy settin g option window.[...]

78 Using MDC 3 3 Using MDC 3.3.5 Command Retry This feature is used to specify the maximum number of time s the MDC command will be retried in case of there being no reply or a corrupte d reply fro m an LFD. Th e retry co unt value ca n be set us ing the MDC options window. The retry co unt value must be between 1-10. The defau lt value is 1.[...]

79 Using MDC 3 3 Using MDC 3.3.6 Getting Started with MDC 1 To start the program , click Start Programs Samsung MDC Unified . 2 Click Add to add a disp lay device.  If the connect ion is established via RS232C, go to Serial and spec ify the COM Port .[...]

80 Using MDC 3 3 Using MDC  If the connect ion is established via Ether net , enter the IP th at was entere d for the disp lay device.[...]

81 Using MDC 3 3 Using MDC 3.3.7 Main Screen Layout Menu Bar Change the status o f a display devic e or the proper ties of the pro gram. Device Category View a list of connected di spla y devices or device groups. Schedule Category View a list of schedules for display devices . Set List Select the display device you want to adjust . Modify the Set [...]

82 Using MDC 3 3 Using MDC 3.3.8 Menus You can power on or off a selec ted device or chan ge the input source or volume of the device. Choose display device s from the lis t of sets, an d select the Home tab. Home Select an item an d change the co rresponding set ting. Power  On : Power on a selected display.  Off : Power off a sele cted disp[...]

83 Using MDC 3 3 Using MDC Alert  Fault Devic e  This menu sh ows a list of d isplay devices which hav e following er rors - fan e rror, temp erature error, brigh tness sensor error, or lamp erro r. Select a display device from th e list. The Repair button will be en abled. Click the re fresh button to refresh t he error status of th e displa[...]

84 Using MDC 3 3 Using MDC 3.3.9 Screen Adjustment The screen s ettings (c ontrast, brightness, et c.) can be adjusted. Choose display device s from the lis t of sets, an d select the Picture tab. Custom Select an item an d change the co rresponding scr een setting.  Color and Tint are not available if the input source is PC .  Red , Green , [...]

85 Using MDC 3 3 Using MDC Green  Customize the intensity of gree n color for the selected display device . Blue  Customize the intensity of blue co lor for the selected display device. Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the g amma value f or the selec ted displa y. Auto [...]

86 Using MDC 3 3 Using MDC HDMI Black Le vel Adjust the HDMI Black Le vel for the selected displ ay device. Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode th at does not suppor t detailed configur ation. The -/+ butt ons can b e used to ad just Zoom . The s[...]

87 Using MDC 3 3 Using MDC 3.3.10 Sound Adjustment You can chan ge the sou nd settings. Choose display device s from the lis t of sets, an d select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for th e selected display. Treble Adjust the treb le for the selec ted disp[...]

88 Using MDC 3 3 Using MDC 3.3.11 System Setup Choose display device s from the lis t of sets, an d select the System tab. Video Wall The Vide o Wall functio n can be used to display part of a whole picture or repea t the same picture on each of connec ted multiple d isplay devices. Video Wall is enabled only when devices are in the group. Video Wa[...]

89 Using MDC 3 3 Using MDC H Select the number of ho rizontal display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of vertical display devices. A maximum of 15 displays can be ar ranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H[...]

90 Using MDC 3 3 Using MDC PIP Basic information re quired to adjust PIP will app ear in the men u screen.  PIP will be disabled when Video Wall is ON .  Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the curr ent displa y. PIP Source Select a PIP input source. Sound Select Select and enable the sound fr om [...]

91 Using MDC 3 3 Using MDC General User Auto Color Automatically adju st the screen color s. Available only in PC mode. Auto Power Set the prod uct to autom atically po wer on. Standby Control Set the stan dby mode to activate if a n input source is not d etected. Fan & Temperature Configure the settings requ ired to de tect the fan speed an d [...]

92 Using MDC 3 3 Using MDC Security Safety Lock Lock the on -screen m enus. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a messa ge when the Source is chang ed. Not Optimum Mode OSD Select whethe r to[...]

93 Using MDC 3 3 Using MDC Time Clock Set Change the c urrent time o n the selec ted displa y device accor ding to th e time set on a PC. If the time is not set on the display device, null values will be displayed. Timer  On Time : Set the time to powe r on the s elected disp lay device.  Off Time : Set the time to power off the selected disp[...]

94 Using MDC 3 3 Using MDC  Once : Activate the timer only on e time.  EveryDay : Activat e the timer ever y day.  Mon~Fri : Activa te the timer from Monday th rough Frid ay.  Mon~Sat : Activate the timer from Mo nday throug h Saturday.  Sat~Sun : Activate the tim er on Saturdays and Sundays.  Manual : Customize days of the week. [...]

95 Using MDC 3 3 Using MDC Screen Burn Protection Pixel Shift Move the scr een slightly at specified time intervals to prevent scre en burn-in . Screen Saver This function p revents scr een burn-in whe n the scre en of the s elected disp lay device is left idle fo r an extended period of time .  Interval : Set the interval to a ctivate the Scree[...]

96 Using MDC 3 3 Using MDC Safety Screen The Safety Screen function can be use d to prev ent screen bu rn-in when a stationar y image disp lays on the screen of a display device for an extended period of time. Lamp Control Lamp Control is used to adjust the backligh t to reduce power co nsumption. Automatically adju st the backligh t of the selecte[...]

97 Using MDC 3 3 Using MDC 3.3.12 Tool Settings Security Panel Control Turn on or off the scre en of a display device. Remote Control Enable or disable the remote co ntrol. Reset Reset Picture Reset the scre en settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settin gs. Reset All Reset the screen, soun d and system set[...]

98 Using MDC 3 3 Using MDC Edit Column Options Language : Select a language to use in the MDC program. Afte r selecting a lan guage, restart the MDC program to u se the selec ted langua ge. Command Retry Count : Specify the nu mber of retr y attempts wh en a comm and fails. Error Status Int erval : Specify the time in terval to qu ery the display d[...]

99 Using MDC 3 3 Using MDC Edit Column Select the items you want to disp lay in the list of sets. Information View the program informati on. 4[...]

100 Using MDC 3 3 Using MDC 3.3.13 Other Functions Resizing a Window Place the mou se pointer on a corn er of the pr ogram win dow. An arro w will appe ar. Move the arrow to customize the size of the program window.[...]

101 Using MDC 3 3 Using MDC Group Management Creating G roups Create groups an d manage the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group Edit in the display device list section on the left side o f the program window. 2 In the Edit Group window displayed, click Add on the same le vel or Add on [...]

102 Using MDC 3 3 Using MDC  Add on the sub level : Create a sub-group under the selected grou p. 3 Enter the grou p name. Deleting Groups 1 Select a grou p name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted. Renaming Groups 1 Select a grou p name, and click Edit . 2 In the Edit Gr[...]

103 Using MDC 3 3 Using MDC Schedule Management Creating Sch edules Create and r egister a sc hedule on a group ba sis. 1 Click All Schedule Lis t in the schedule sec tion on the left side of the prog ram window. The Add button will be enable d in the middle. 2 Click the Add button. The Add Schedule window will appear.[...]

104 Using MDC 3 3 Using MDC 3 Click Add belo w the Device Gr oup item, and select the group you wa nt to add a schedule to. 4 Select Date&Time/Action an d click OK . The schedule will be added and a list of schedules will appear in the set list window.  Device Gr oup : Sele ct a group .  Date&Time  Instant Execut ion : Run the sche[...]

105 Using MDC 3 3 Using MDC 3.3.14 Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emit ted from nearby electronic devices. Issue Solution The display you want t o control does not ap pear on th e system information chart. 1. Check the co nnection o f th[...]

106 Using MDC 3 3 Using MDC How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is se lected: Settin gs for the se lected dis play are displaye d. 3 When two displays are selected (e. g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed b[...]

107 4 Screen Adjustment 4 Screen Adjustment Configure the Picture settings ( Brightness , Color Tone , etc.). The layout of the Picture menu options may vary depending on the product. 4.1 Picture Mode MENU [] Picture Picture Mode ENTER [ ] Select a picture mode ( Picture Mode ) suitable for the enviro nment where the pr oduct will be used . Differe[...]

108 Screen Adjustment 4 4 Screen Adjustment 4.1.2 If the input source is AV, Component, HDMI or TV  Dynamic : This mode is suitable when the ambient light is bright .  Standard : This mode is gen erally suitable f or any environme nt.  Natural : Suitable for reduci ng eye stra in.  Movie : This mode reduc es eye fatigue. 4.2 Backlight /[...]

109 Screen Adjustment 4 4 Screen Adjustment 4.3 Screen Adjustment MENU [] Picture Screen Adjustment ENTER [ ] Screen Adjustment provides various pic ture size and aspect ra tio options. Select an option using the and arrow keys, and th e press [ ]. Use the arrow key s to select an op tion in the sub -menu, and th en press [ ]. Different Screen Adju[...]

110 Screen Adjustment 4 4 Screen Adjustment Do not set your product to 4:3 format for a long time. The borders displayed on the left and right, or top and bottom of the screen may cause image retention (screen burn) which is not covered by the warranty.  Screen Fit : Displays the full image without any cut-off when HDM I (720p / 1080i / 1080p) o[...]

111 Screen Adjustment 4 4 Screen Adjustment 4.3.2 Zoom/Position Adjusts the pict ure position. Position is only avai lable if Pi cture Size is set to Zoom1 , Zoom2 , Wide Fit or Screen fit .  To use the Position fu nction after selecting Zoom1 , Zoom2 , Wide Fit or Screen fit , follow these steps. 1 Press the button to sele ct Position . 2 Press[...]

112 Screen Adjustment 4 4 Screen Adjustment 4.3.4 Resolution Select If the picture is not normal even whe n the resolution of the graphics card is one of the following , you can optimize the p icture qua lity by select ing the sam e resolution for the pro duct as th e PC using this menu. Available resolutions: Off / 1024 x 768 / 1280 x 768 / 1360 x[...]

113 Screen Adjustment 4 4 Screen Adjustment 4.5 Advanced Settings MENU [] Picture Advanced Settings ENTER [ ] The displayed ima ge may differ depend ing on the model. Input Source Picture Mode Advanced Settings PC , DVI , DisplayPort , HDMI (when a PC is connected ) Information , Calibration White Balance / Gamma Advertisement Dyna mic Contrast / B[...]

114 Screen Adjustment 4 4 Screen Adjustment 4.5.1 Dynamic Contrast Adjust the scre en contrast .  Off / Low / Medium / High 4.5.2 Black Tone Select the blac k level to adjust the scr een depth.  Off / Dark / Darker / Darkest 4.5.3 Flesh Tone Emphasize pink Fle sh Tone. 4.5.4 RGB Only Mode Displays the Red , Green and Bl ue color for making fi[...]

115 Screen Adjustment 4 4 Screen Adjustment  Blue : Adjust the blue l evel.  Reset : Resets the 10p White Balance to its default settings.  Available when the Picture Mode is set to Movie and when the external input is set to all input.  Some external devices may not support this function. 4.5.8 Gamma Adjust the primary color intensity.[...]

116 Screen Adjustment 4 4 Screen Adjustment 4.6 Picture Options MENU [] Picture Picture Options ENTER [ ] Select an option u sing the and arrow keys, an d the press [ ]. Use the arro w keys to chan ge the setting, and the n press [ ]. The displayed ima ge may differ depending on t he model. Input source Picture Mode Picture Options PC , DVI Informa[...]

117 Screen Adjustment 4 4 Screen Adjustment 4.6.1 Color Tone If the input sour ce is PC , DVI , Di splayPort or HDMI (PC connection).  Off / Cool / Standard / Warm If the input sour ce is AV , Component , HDM I or TV  Off / Cool / Standard / Warm1 / Warm2  Warm1 or Warm2 will be deactivated when the Picture Mode is Dynamic .  Settings c[...]

118 Screen Adjustment 4 4 Screen Adjustment 4.6.5 HDMI Black Level Selects the blac k level on the sc reen to adjus t the screen depth .  Normal / Low Available only in HDMI and DVI mode (AV Timing: 48 0p, 576p, 720p, 1080i, 1080p). 4.6.6 Film Mode Sets the product to au tomatically sense an d process film signals from all sour ces and adjust th[...]

119 5 Sound Adjustment 5 Sound Adjustment Configure the sound ( Sound ) settings for the product. 5.1 Sound Mode MENU [] Sound Sound Mode ENTER [ ] Use the up an d down ar row keys to se lect an op tion, and the n press [ ].  Standard : Selects th e normal sou nd mode.  Music : Emphasizes mus ic over voices.  Movie : Provides the best so u[...]

120 Sound Adjustment 5 5 Sound Adjustment 5.2 Sound Effect MENU [] Sound Sound Effect ENTER [ ]  If Speaker Select is set to External , Sound Effect is disabled.  Available only when Sound Mode is set to Standar d .  Virtual Su rround ( Off / On ) This funct ion provides a virtual 5.1 c hannel surr ound sou nd experience through a pair of [...]

121 Sound Adjustment 5 5 Sound Adjustment 5.3 Broadcast Audio Options MENU [] Sound Broadcast Audio Options ENTER [ ]  Preferred Langu age (digital channels only) Use the up and down arrow keys to select a languag e, and then press [ ]. Digital-TV broadc asts can simultan eously transmit many audio tracks (for example, simultan eous translations[...]

122 Sound Adjustment 5 5 Sound Adjustment  Auto Volume ( Off / Normal / Night ) Normal equalizes the volume level on each channel, so th at when you c hange channels, the volume level is the sam e. Night equalizes and decrease the vo lume level o n each channel, so each channel is qu ieter. Night is useful at nigh t, when you m ay want to keep t[...]

123 6 Channel 6 Channel MENU [] Ch annel ENTER [ ] This option is available when the input source is TV . m 6.1 Antenna (Air / Cable) MENU [] Channel Antenna ENTER [ ] Before your telev ision can begi n memorizing the available ch annels, you mu st specify the ty pe of signal source that is connec ted to the L ED display.  Air / Cable The displa[...]

124 Channel 6 6 Channel 6.2 Auto Program The Auto Prog ram function memorizes all c hannels that a re available over the air or through yo ur cable system and adds them to the Channel List. To start Auto Program , follow these st eps: 1 Push MENU [] Channel Auto Program ENTER [ ] on your remote. The Antenna Source screen a ppears. 2 On the Antenna [...]

125 Channel 6 6 Channel 6.4 Fine Tune MENU [] Channel Fine T une ENTER [ ] (analog channels only) If the reception is clear, yo u do not h ave to fine tune the cha nnel, as this is done au tomatically duri ng the search and stor e operation. If the signal is weak or disto rted, fine tune the channel manua lly. Scroll to the left or right until t he[...]

126 7 Network 7 Network 7.1 Network Setting 7.1.1 Connecting to a Wired Network There are t hree ways t o attach your product to your LAN u sing cable.  You can at tach your pro duct to your LAN by connecti ng the LAN port on the back of your product to an external mod em using a LAN cable. See the diagram below.  You can at tach your pro duc[...]

127 Network 7 7 Network access the Inte rnet so you do not h ave to enter them ma nually. Most hom e networ ks are Dynamic Networks. Some networks requ ire a Static IP addre ss. If your network requ ires a Static IP address, you must enter the IP address, su bnet mask, g ateway, and DNS values man ually on your p roduct Cable Setup Screen w hen you[...]

128 Network 7 7 Network Automatic Network Settings Use the Automatic Network Se ttings when connecti ng your product to a network th at supports DHCP. To set up yo ur product cable netw ork connectio n automa tically, follow these steps. How to set up automat ically 1 Go to the Network Settings screen. 2 Select Start , press [ ], and then press [ ][...]

129 Network 7 7 Network If you make a mistake when entering a number, re-enter the number to correct it. You can also press the up or down arrow button to change the number one unit at a time. 9 When done en tering the IP Address , press [ ]. 10 Press the down arrow key to go to th e Subnet Mask fields, a nd then press [ ]. 11 Repeat the same entry[...]

130 Network 7 7 Network 7.1.3 Connecting to a Wireless Network To connect yo ur product to your network wir eless, you need a wir eless router or mo dem and a Samsung Wireless LAN adapter (WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. See the illustration below. Samsung’s Wire less LAN adapter is sold sep[...]

131 Network 7 7 Network  The product may not recognize the “Samsung Wireless LAN adapter” if you connect it to the product with a USB hub or USB extension cable ot her than the cable supplied with the product. 7.1.4 Wireless Network Setting Automatic Network Setup Most wireless networks have an op tional security system that requires devices[...]

132 Network 7 7 Network Manual Network Setup Use the Manual Network Settings when con necting your prod uct to a network that re quires a Static IP address or if th e automatic co nnection process has failed. Getting the Netw ork Connect ion Values To view the Ne twork connectio n values on m ost Windows comput ers, follow these steps. 1 Right clic[...]

133 Network 7 7 Network 13 Repeat the entry p rocess for each field in the IP Address . If you make a mistake when entering a number, re-enter the number to correct it. You can also press the or button to change the number one unit at a time. 14 When done en tering the IP Address , press [ ]. 15 Press the button t o go to the Subnet Mask fields, an[...]

134 Network 7 7 Network 7.2 Network Status MENU [] Network Network Stat us ENTER [ ] You can chec k the curr ent networ k and Interne t status. The displayed ima ge may differ depend ing on the model. m Network Status Y our wireless network and Internet connection are setup and ready to use. Y ou are connected to the Internet. If you have any probl[...]

135 Network 7 7 Network 7.3 MagicInfo Lite Settings MENU [] Network MagicInfo Lite Settings ENTER [ ] 1 Server  Server (Setting the MagicI nfo Lite Server IP)  Enter the serv er IP addre ss and port n umber. Use 7 001 as th e port numb er. If unable to connect to the server using port number 7001, check with your server administrator to find [...]

136 Network 7 7 Network 7.4 Wi-Fi Direct MENU [] Network Wi-Fi Direct ENTER [ ] Set to connec t the produc t to wireless mobile devices. Using thi s function, you can connect w ireless mobile devic es with your p roduct direc tly without a router. To use this function, your mobile device should be supported by the Wi-Fi Direct . To connect your mob[...]

137 Network 7 7 Network  Return Returns to t he screen be fore entering the securit y key.  The security key should consist of more than 8 digits.  Input the generated security key into the device you want to connect.  If network does not operate normally, check the security key again. An incorrect security key may cause a malfunction. [...]

138 Network 7 7 Network 7.7 Device Name Select or ente r a device n ame. This nam e can be shown on network rem ote controls over the netw ork.[...]

139 8 System 8 System 8.1 Setup MENU [] System Setup ENTER [ ] Configure the channels an d the time wh en setting up the prod uct for th e first time o r when reset ting the unit. The displayed image may differ depend ing on the model. m System Setup Multi Control T ime Menu Language Rotate Menu Eco Solution Caption English Landscape On[...]

140 System 8 8 System 8.2 Multi Control MENU [] System Multi Control ENTER [ ] Assign an individual ID to your product. 8.2.1 Configuring settin gs for Multi Control  ID Setup Assign an ID to a set. (Range: 0~99 ) Press or to select a n umber, and press [ ] .  ID Input Enter the ID n umber of the produc t connecte d to the in put cable for in[...]

141 System 8 8 System 8.3 Time MENU [] System Ti me ENTER [ ] You can configu re Clock Set or Sleep Timer . You can also set the product to automatica lly turn on or off at a specified time using the Timer function. 8.3.1 Clock Set the cloc k to use the v arious vari ous timer f eatures of the product . Changing the Setting for Clock  Clock Mode[...]

142 System 8 8 System 8.3.2 Sleep Timer Automatica lly shuts off the prod uct after a preset period of time. ( Off , 30 min , 60 min , 90 min , 120 min , 150 min and 180 min ). Use the up and down arrows to select a period of time, and then press [ ]. To cancel Sleep Timer , select Off . 8.3.3 On Timer Set On Timer so that you r product turns on a [...]

143 System 8 8 System 8.3.4 Off Timer Set the off timer ( Off Timer ) by m aking a selection from one of the seven op tions. ( Of f Timer 1 ~ Off Timer 7 ) You must set the clock before you can use Off Timer .  Setup : Select Off , Once , Everyday , Mon~F ri , Mon~Sat , Sat~Sun or Manual . If you select Manual , you can choose the days you want [...]

144 System 8 8 System 8.4 Menu Language MENU [] System Menu Language ENTER [ ] Set the menu language. A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. 8.5 Rotate Menu MENU [] System Rota te Menu ENTER [ ]  Landscap e : Display t he menu in lan dscape mod e ([...]

145 System 8 8 System 8.6 Eco Solution MENU [] System Eco Solution ENTER [ ] 8.6.1 Energy Saving Save power with th e Energy Saving feature. While Energy Savin g mode is active, the product po wer consump tion will be controlle d to save po wer.  Off / Low / Medium / High / Pic ture Off 8.6.2 Eco Sensor (Off / On) To enhance your power sav ings,[...]

146 System 8 8 System 8.6.4 Auto Power Off (Off / On) The produc t will auto matically tu rn off if you don’t press a button on the remo te or touch a button on product fr ont panel with in 4 hours to preve nt overheatin g. 8.7 Caption MENU [] System Caption ENTER [ ] (On-Screen Text Messages) 8.7.1 Caption You can switch the capt ion function on[...]

147 System 8 8 System 8.7.3 Digital Caption Options (digital chan nels only) Adjusts th e each optio n. When done , select Close .  Size : Options inc lude Default, Small, Sta ndard and Large. The d efault is Stand ard.  Font Styl e : Options in clude Default an d Styles 0 to 7. The default is Style 0.  Font Color : You can ch ange the col[...]

148 System 8 8 System 8.8 Security MENU [] System Security ENTER [ ] Every time you access the Security functions, the PIN screen will appear and the default PIN number is “0-0-0-0". Th e PIN screen closes an d the Security menu ap pears. 8.8.1 Safety Lock (Off / On) It sets safe lock function. All the menus a nd buttons of the produc t and [...]

149 System 8 8 System 8.8.3 Program Rating Lock (Off / On) When turn ed on, the Program Rati ng Lock feature ca n automatica lly block program s that you deem inappropriate for your ch ildren. You must enter a PIN (pe rsonal identification number) b efore you c an set or change an y of the Program Rating Loc k restrictions.  This option is avail[...]

150 System 8 8 System  Canadian E nglish Ra ting : You can block TV programs b ased on th eir Anglophone Canadian r ating. Canadian English Rating displays a column with locks and the following r atings categories. C : Programmin g intended fo r children under ag e 8. / C8+ : Programming gene rally considered acceptable for children 8 years and [...]

151 System 8 8 System 8.8.4 Change PIN The Change PIN screen will appear. Choose any 4 digi ts for your PIN and enter it in Enter New PIN . Re- enter the same 4 digits in Confirm N ew PIN . When the Confirm screen disappears, press the Close button. The product ha s memorized your new PIN. 8.9 PIP MENU [] System PIP ENTER [ ]  If you have set Do[...]

152 System 8 8 System  Size ( , , , , ): Select a siz e for the s ubpicture.  Position ( , , , ): Selec t a position for the sub- picture. In Double ( , , ) mode, you cannot select Position .  Sound Select ( Main / Sub ): You ca n choose to listen to the sound from th e Main pictur e or the Sub pictur e. 8.10 Auto Protection Time MENU [ Sy[...]

153 System 8 8 System 8.11 Screen Burn Protection MENU [] System Screen Burn Protection ENTER [ ] To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn preven tion technolog y. Pixel Shift moves th e picture slightly on the screen. The Pixel Shift T ime setting allows you to program th e time betwee n movement[...]

154 System 8 8 System 8.11.2 Timer You can set th e timer for Screen Burn Protection . Timer  Off  Repeat : Display the im age retention-p reventive patte rn set in Mode at specified time int ervals ( Period ). Period and Time can be configured when Repeat is selected.  Interval : Display the im age retention-p reventive patter n set in Mo[...]

155 System 8 8 System 8.11.4 Side Gray When the screen is set to 4:3 aspect rati o, adjust the br ightness of white margins on side s to protect the screen.  Off / Light / Dark 8.12 Ticker Input text while a video or imag e is displayed and display the text on the screen.  Off / On Message , Time , Position , Motion , and Font Style are enabl[...]

156 System 8 8 System 8.13 Video Wall MENU [] System Vide o Wall ENT ER [ ] Customize the layout of mult iple displays th at are co nnected t o form a vide o wall. In ad dition, disp lay part of a whole pic ture or r epeat the sam e picture on each o f the connec ted mult iple displays. To display multiple imag es, refer to MDC Help or the Magic In[...]

157 System 8 8 System 8.13.3 Horizontal This function auto matically divides t he screen acc ording to th e specified numb er of horizon tal displays. Enter the number of horizontally arranged displays. The horizontal sc reen will automatically be divided according to the number entered. A maximum of 15 displays can be assigned to the horizontal ar[...]

158 System 8 8 System 8.14 Source AutoSwitch Settings MENU [] System Source AutoSwitch Settings ENTER [ ] Turning on the di splay with Source AutoSwitch On , and the previous video source selection is not active, the display will automatica lly search th e different video input so urces for active video.  Source AutoSwitch When the Source AutoSw[...]

159 System 8 8 System 8.15 General MENU [] System General ENTER [ ] 8.15.1 Max. Power Saving Turns off the p roduct to re duce powe r consumption after the PC h as been left id le for a specified period of time. Available only in PC , DVI , HDMI , DisplayPort mode. 8.15.2 Game Mode When connec ting to a gam e console s uch as PlaySt ation™ or Xbo[...]

160 System 8 8 System 8.15.3 BD Wise Provides the optim al picture qu ality for Samsung DVD, Blu-ray and Home Theater products whic h support BD Wise . When BD Wise is turned On , the picture m ode is aut omatically chang ed to the optimal resolution. Available when you connect Samsung products tha t support BD Wise through an HDMI cable to the pro[...]

161 System 8 8 System 8.15.8 Lamp Schedule Enables the lam p value to be adjusted to a user-speci fied value at a spe cified time in MDC mode . 8.15.9 OSD Display Displays or hides a menu item on the screen.  Source OSD / No Signal OSD / MDC OSD 8.15.10 Power On Adjustment You can set the warm -up time for the scr een to turn on after th e power[...]

162 System 8 8 System 8.16 Anynet+ (HDMI-CEC) MENU [] System Anynet+ (HDMI-CEC) ENTER [ ] 8.16.1 Anynet+ (HDMI-CEC) What is Anynet+? Anynet+ is a function that enable s you to control all con nected Samsung devices that supp ort Anynet+ with your Samsung product rem ote. The Anynet+ system can be used only w ith Samsung devices that have the Anynet[...]

163 System 8 8 System Anynet+ Menu The Anynet+ me nu chang es dependin g on the typ e and stat us of the Anynet + devices conne cted to the product. 8.16.2 Auto Turn Off (No / Yes) Setting an Anynet+ Device to t urn Off automa tically when the product is t urned off.  If Aut o Turn Off is set to Yes , running external devices will turn off at th[...]

164 System 8 8 System Troubleshoo ting for Anynet+ Problem Possible Solution Anynet+ does not w ork.  Check if the device is an An ynet+ device. The Anynet+ system supports Anynet+ devices only.  Check if the Anyn et+ device pow er cord is prop erly connecte d.  Check the Anynet+ devi ce’s Video/Audio/HDMI cable connections.  Check wh[...]

165 System 8 8 System 8.17 DivX® Video On Demand MENU [] System DivX® Video On Demand ENTER [ ] Shows the reg istration code authorized for the pro duct. If you connect to the DivX web site and r egister using that co de, you can d ownload t he VOD registr ation file. For more information about DivX® VOD, visit “http://vod.divx.com”. 8.18 Re[...]

166 System 8 8 System 8.19 Reset All MENU [] System Reset All ENTER [ ] This option re turns all the current settin gs for a di splay to the de fault factor y settings. ( Menu Language , Security , Time , Multi Control and Anynet+ will not be initialized.) 8.20 PC Module Power MENU [] System PC Module Power ENTER [ ] The PC modu le can b e turned o[...]

167 9 Support 9 Support 9.1 Software Update MENU [] Support Software Update ENTER [ ] The Software Update menu lets yo u upgrade your pr oducts software to the late st version.  Current Version : This is the software version already installed in the produc t. Be careful not to turn off the power until the upgrade is complet e. The product will t[...]

168 Support 9 9 Support View this info rmation wh en your pro duct does not work pr operly or wh en you wan t to upgrad e the software. You can find in formation re garding our call center s and how to download products an d software.[...]

169 Support 9 9 Support 9.3 Contents Home MENU [] Support Contents Home ENTER [] You can enjo y useful and va rious content s. 9.3.1 Channel List MENU [] Support Contents Home Channel List ENTER [] You can view all t he channe l searche d. Using the ope ration button s with the Channel List.  Antenna : Switch the antenna signal to Air or Cable .[...]

170 Support 9 9 Support 9.3.2 Channel Manager MENU [] Support Contents Home Channel Manager ENTER [] Display all the channels se arched and edit the fav orites. Chan ge channe l names, view info rmation, a nd use the delete function.  : Switch the antenn a signal to Air or Cable .  : Delete chann els that are se lected using th e cursor or th[...]

171 Support 9 9 Support Using Tools  Edit Favorites : Edit selected channels in Favorites .  Add : Add selected channels to Favorites .  Delete : Delete selected channels from Favorites .  : Change the o rder of chan nels in Favorites .  : Copy chann els to anoth er Favorites group.  : Move to an other Favorites grou p.  : Chan[...]

172 Support 9 9 Support 9.3.5 Source Source allows you to select a variety of sources an d change so urce device n ames. You can display the screen of a source device connec ted to the p roduct. Select a source fro m Source List to display the screen of the selected source. The input source can also be changed by using the SOURCE button on the remo[...]

173 10 AllShare Play 10 AllShare Play Enjoy videos, p hotos, music files save d on a USB Mass Storage Class (MSC) device. 10.1 What is AllShare Play? Play photo, vide o or music files saved on a sto rage device. Wirelessly connect a smartpho ne to a PC using a wire less netwo rk. Play various conten t using one o f the following met hods in AllShar[...]

174 AllShare Play 10 10 AllShare Play  The screen saver activat es if the p roduct is le ft idle for a period of time specified in Auto Protection Time .  Power-saving mode on some exte rnal hard disk drives may aut omatically deac tivate after connecting to the produ ct. File system and formats  Allshare play may not function prop erly wi[...]

175 AllShare Play 10 10 AllShare Play 10.1.2 Using a USB device Connecting a USB device 1 Turn on your product. 2 Connect a USB device co ntaining photo, music and/ or movie files to th e USB port on the back or side panel of th e produc t. 3 A message " Connected Device " appears when the USB device is c onnected p roperly . Select typ e[...]

176 AllShare Play 10 10 AllShare Play 10.1.3 Connecting to a PC over a network Play photo, video and mu sic files saved on a PC through a netwo rk connection in AllShare Play mode.  For details on ho w to configur e a network, re fer to the se ction "7.1 Ne twork Setting".  To view cont ent saved on t he PC, connec t the produ c t a[...]

177 AllShare Play 10 10 AllShare Play 10.1.4 Using the DLNA features If you connect the product and a source device such as a cell phone or PC to the same network, you can play media co ntent saved o n the device su ch as videos , photos and m usic. Visit http:// www.samsu ng.com or c ontact th e Samsung Ele ctronics Custom er Center for more infor[...]

178 AllShare Play 10 10 AllShare Play 10.2 Using the Basic AllShare Play Features MENU [] Support Contents Home AllShare Play ENTER [] 10.2.1 Sorting the file lists To sort f iles, pr ess on the remote control to specify the sorting criteria. The displayed image may differ depend ing on the model. Sort Criteria Operation Vide os Photos Music Folder[...]

179 AllShare Play 10 10 AllShare Play 10.2.2 Playing Selected Files 1 Select files from the list of Videos , Photos , or Music files. 2 Press TOOL on the remot e control and sele ct Selection Play . The option does not appear if a folder is highlighted by the cursor. 3 Select files and press Play .  appears for selected files.  To select all [...]

180 AllShare Play 10 10 AllShare Play 10.2.4 Creating a P laylist (Playlist) Create a list of files you want to play continuo usly. 1 Select files from the list of Videos , Photos , or Music files. 2 Press TOOL on the remot e control and sele ct Add to Playlist . The option does not appear if a folder is highlighted by the cursor. 3 Select files an[...]

181 AllShare Play 10 10 AllShare Play 10.3 My List MENU [] Support Contents Home AllShare Play My List ENTER [] Access desired content more conveniently and quickly. To play files, select files or a playlist ( Playlist ) an d press [] .  Recently Played : Display video, photo or music files tha t were recen tly played. This m ode is suitable whe[...]

182 AllShare Play 10 10 AllShare Play 10.4 Videos MENU [] Support Contents Home AllShare Play Videos ENTER [] 10.4.1 Playing a Video 1 Select the intern al memory o r a USB device. Se lect a file fr om the list of f iles. 2 Press the [ ] button or [ ] (Play) button.  The file name appears on the top with its playing time.  If video time infor[...]

183 AllShare Play 10 10 AllShare Play 10.5 Photos MENU [] Support Contents Home AllShare Play Photos ENTER [] 10.5.1 Viewing a Phot o (or Slide Show) 1 Select the intern al memory o r a USB device. Se lect a file fr om the list of f iles. 2 Press the [ ] button.  To view files manu ally, one at a time, press t he left or right a rrow button s. ?[...]

184 AllShare Play 10 10 AllShare Play 10.6 Music MENU [] Support Contents Home AllShare Play Music ENTER [] 10.6.1 Playing Music 1 Select the intern al memory o r a USB device. Se lect a file fr om the list of f iles. 2 Press the [ ] button or [ ] (Pla y) button.  When the mu sic is playing, yo u can search using the [ ] (REW) and [ ] (FF) butto[...]

185 AllShare Play 10 10 AllShare Play 10.7 Videos / Photos / Music Play Option menu When playing video or phot o files, you can press t he TOOLS button to display an Opti ons menu. Below are a se ries of tables listing the optio ns available an d the me dia each optio n applies to. Option Name Operations Videos Photos Music View Sort music files gr[...]

186 AllShare Play 10 10 AllShare Play  Pressing the INFO button while a device name is selected will display information about the selected device.  Pressing the INFO button while a file is selected w ill display information about the selected file. Subtitle Setting Displays the Subtitle Setting . You can set up a subtitle option. Start Slide[...]

187 AllShare Play 10 10 AllShare Play 10.8 Supported Subtitle and A llShare Play file formats 10.8.1 Subtitle 10.8.2 Supported image resolutions 10.8.3 Supported music file formats External Internal  MPEG-4 time d text (.ttxt )  SAMI (.smi)  SubRip (.srt)  SubViewer (.sub)  Micro DVD (.sub or .txt)  SubStation Alpha (.ssa)  Adv[...]

188 AllShare Play 10 10 AllShare Play 10.8.4 Supported Video Formats *.flac FLAC FLAC The Seek (jump) fu nction is not supported. Support s up to 2 channel *.ogg OGG Vorbis Supports up to 2 channel *.wma WMA WMA Supports up to WMA 10 Pr o 5.1 channel. WMA lossless audi o is not supported. File Extension Cont ainer Video Codec Resolution Frame rate [...]

189 AllShare Play 10 10 AllShare Play  Video content will not play, or not play correctly, if there is an error in the content or the container.  Sound or video may not work if the contents have a standard bitrate/frame rate above the compatible Frame/sec listed in the table above.  If the Index Table is in error, the Seek (Jump) function [...]

190 11 MagicInfo Lite 11 MagicInfo Lite 11.1 File Formats Compatible with MagicInfo Lite Player [Read before usin g MagicInfo Lite Player ]  The file system supports FA T16, FAT32 and NTFS.  A file with a vertical and horizontal r esolution larger t han the maximum r esolution cannot be played. Check the vertical and horizo ntal resolution of[...]

191 MagicInfo Lite 11 11 MagicInfo Lite 11.1.1 Contents File Extension Cont ainer Video Codec Resolution Frame rate (fps) Bit rate (Mbps) Audio Codec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.flv *.vob *.svi *.m2ts *.mts *.divx AVI MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6 ~ 30 30 A[...]

192 MagicInfo Lite 11 11 MagicInfo Lite Video  Video content with out audio is n ot supported.  3D video is not supported .  Content with a resolution larger than the resolu tion specified in the table above is not supported.  Video content with a Bit rat e or Frame rate large r than the ra te specif ied in the table abov e can cause ch[...]

193 MagicInfo Lite 11 11 MagicInfo Lite Flash  Compatible with Flash 10.1  Flash Animation  Compatible file f ormat : SWF  Resolution : 1280 x 72 0  Caution - Performance comparable to Flash Player on a Windows operatin g system cannot be guarantee d - Optimization is n eeded durin g content cr eation  Flash Video  Compatible f[...]

194 MagicInfo Lite 11 11 MagicInfo Lite PDF  Compatible docume nt file format s  Extension : pdf  Functions not supporte d  Content less than 1 pixel not supp orted becau se of performance de gradation issue.  Masked Image, Tiled Imag e content not supp orted.  Content with Rotated Tex t, not supporte d.  3D Shadow E ffects not[...]

195 MagicInfo Lite 11 11 MagicInfo Lite 11.2 MagicInfo Lite Player 11.2.1 Network Schedule Connecting to a ser ver Network setup To run Ma gicInfo Li te , connect to a network. Refer to 126 page for details about the Networ k Settings menu. Server setup Go to MENU Network MagicI nfo Lite Settings Server . Next, enter the server information. (E.g.: [...]

196 MagicInfo Lite 11 11 MagicInfo Lite MagicInfo Lite Settings MENU [] Support Contents Home MagicInfo Lite ENTER [] Press the MagicInfo Lite button on the remote contro l. You can view wh ether the ser ver is connected (approval) in t he MagicInfo Lite menu screen. T o view whether the server is conne cted when a network sc hedule is runnin g, pr[...]

197 MagicInfo Lite 11 11 MagicInfo Lite Approving a connected device from the server 1 Access the server you have assigned to your device. 2 Enter your ID and password to log in. 3 Select Device fr om the top menu bar. 4 Select Lite Device from the menus on the left.[...]

198 MagicInfo Lite 11 11 MagicInfo Lite 5 Select View Unapproved Lite De vice from the sub -menus of Lite Device . 6 Select the Approve button for your device from the list of unapproved Lite devices. 7 Enter the in formation re quired to appr ove the device.  Device Na me : Enter the device na me.  Device Model Name : Select your device mode[...]

199 MagicInfo Lite 11 11 MagicInfo Lite  For further details on how to configure a schedule, refer t o the <MagicInfo server user's manual>.  If a device is delete d from the list of devices a pproved by the server, the device will reboot to reset its settings. Setting the current time A schedule m ay not ru n if the time set on th[...]

200 MagicInfo Lite 11 11 MagicInfo Lite 11.2.2 Local Schedule Run a schedule cr eated by Local Schedule Manager . Go to Local Schedule Manager Sele ct the co ntent you w ant to run This menu is disabled if there was no schedule run previously in Local Schedule Manager . 1 Select Local Schedule in the MagicInf o Lite Player menu screen. Run a schedu[...]

201 MagicInfo Lite 11 11 MagicInfo Lite 11.2.3 Internal AutoPlay Running Internal AutoPlay The option is enabled only when there is at least one content item, except for music files, in Internal Memory . 1 Select Internal AutoPlay in the MagicInfo Lite Player menu screen .  Play content, which has been cop ied to Internal Memory , in alphabetic [...]

202 MagicInfo Lite 11 11 MagicInfo Lite 11.2.4 USB AutoPlay Running Internal AutoPlay  The option is enabled only when there is at least one content item, except for music files, in USB AutoPlay .  Ensure a USB device is inserted. Be sure to crea te a folder named "MagicInfoSlide" in the USB device and put content in the folder. [...]

203 MagicInfo Lite 11 11 MagicInfo Lite 11.3 Local Schedule Manager Configure the se ttings for playbac k from Local Schedule . Alternatively, s elect and play content from internal or USB m emory acco rding to the customiz ed playback sequence . 11.3.1 Registering a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen.[...]

204 MagicInfo Lite 11 11 MagicInfo Lite 3 Select Time to set the tim e you wan t to play cont ent.  A maximum of 24 schedules can be created.  If more than one schedule is created, the start time must be different for each schedule. (Example of an incorrect setting: 12:00 am - 12:00 am / 12:00 am - 11:00 pm) 4 Select Content to spec ify the c[...]

205 MagicInfo Lite 11 11 MagicInfo Lite 5 Select Duration Specify the seq uence and time du ration to play content fil e s.  Changing the pl aying sequence Select a cont ent file and change th e sequence u sing the Up or Down button.  Duration Set the dura tion to play content.  Duration cannot be specified for videos.  Duration must be[...]

206 MagicInfo Lite 11 11 MagicInfo Lite 7 Check that the schedule h as been ad ded to the Local Schedule Manager . Run Info Copy Create Edit Delete Close Local Schedule Manager Return Internal Memory Storage No Playing Schedule All Schedule 2012.01.01_1834.lsch[...]

207 MagicInfo Lite 11 11 MagicInfo Lite 11.3.2 Modifying a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to m odify. 3 Select Edit . Close MagicInfo Lite Return MagicInfo Lite Player Local Schedule Manager Content Manager Sett[...]

208 MagicInfo Lite 11 11 MagicInfo Lite 4 Change the d etails of the local schedu le. Next, se lect Save . Delete Cancel 12:00 am ~ 12:00 pm Menu1.jpg Menu2 T ime Content --:-- am ~ --:-- pm No Item T ime Content --:-- am ~ --:-- pm No Item T ime Content Edit Return Save[...]

209 MagicInfo Lite 11 11 MagicInfo Lite 11.3.3 Deleting a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local schedule you want to d elete. Next, select Delete . Close MagicInfo Lite Return MagicInfo Lite Player Local Schedule Manager Content Manager[...]

210 MagicInfo Lite 11 11 MagicInfo Lite 11.3.4 Running a Local Schedule Ensure at least one Local Schedule is registered. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the local sche dule you want to run. Next, se lect Run . Close MagicInfo Lite Return MagicInfo Lite Player Local Schedule Manager Content Manager Setti[...]

211 MagicInfo Lite 11 11 MagicInfo Lite 11.3.5 Stopping a Local Schedule This function is enabled only when a schedule is running. Selecting Stop will change the running mode from local schedule to network schedule. 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select Stop . Close MagicInfo Lite Return MagicInfo Lite Player [...]

212 MagicInfo Lite 11 11 MagicInfo Lite 11.3.6 Viewing the detail s of a Local Schedule 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select the loca l schedule you want to view the detail s of. Close MagicInfo Lite Return MagicInfo Lite Player Local Schedule Manager Content Manager Settings Mode Server USB Local Schedule Co[...]

213 MagicInfo Lite 11 11 MagicInfo Lite 3 The details of the sc hedule will be disp layed. Information Return 2012.01.01_1834.lsch 12:00 am~12:00 pm, 2 File(s) - Menu1.jpg Menu2.jpg Close[...]

214 MagicInfo Lite 11 11 MagicInfo Lite 11.3.7 Copying a Local Schedule (Local Schedule) 1 Select Local Schedule Manager in the MagicInfo Lite men u screen. 2 Select a storage device where the lo cal schedule files to copy are saved.  Internal Me mory : Copy local schedules from Internal Memory to a USB memory device.  USB : Copy local schedu[...]

215 MagicInfo Lite 11 11 MagicInfo Lite 3 Select local schedule files and press Copy . 4 A window appear s asking if you wa nt to copy the files to the Internal Memory or USB memory device. Select Yes to copy the files. Run Info Create Edit Delete Close Local Schedule Manager Return Internal Memory Storage No Playing Schedule All Schedule 2012.01.0[...]

216 MagicInfo Lite 11 11 MagicInfo Lite 11.4 Content Manager 11.4.1 Copying content 1 Select Content Mana ger in the Mag icInfo Li te menu screen . 2 Select the conten t you want to copy. Next, se lect Copy .  If content under Internal Memory is selec ted: You ca n copy the content und er Internal Memory to USB memory .  If content under USB [...]

217 MagicInfo Lite 11 11 MagicInfo Lite 11.4.2 Deleting content 1 Select Content Mana ger in the Mag icInfo Li te menu screen . 2 Select the cont ent you want to delete. Nex t, select Delete .  Content un der Internal Memory and US B memory can be deleted at the sam e time. Close MagicInfo Lite Return MagicInfo Lite Player Local Schedule Manager[...]

218 MagicInfo Lite 11 11 MagicInfo Lite 11.5 Settings 11.5.1 Content Default Duration Specify the dura tion to play content.  Image Viewer Time , PPT Viewer Time , PDF Vi ewer Time , Flash Viewer Time The duration must be at least 5 seconds. 11.5.2 Content Ratio Specify the display aspec t ratio by type when playin g content.  PPT Ratio , PDF[...]

219 MagicInfo Lite 11 11 MagicInfo Lite 11.5.5 Screen Layout Change the s creen orie ntation to la ndscape or portrait view .  Landscap e / Portrait 11.5.6 Delete All Content Delete all the content files in Inte rnal Memory . 11.5.7 Safety Remove USB Safely removes US B memory[...]

220 MagicInfo Lite 11 11 MagicInfo Lite 11.6 When Content is Running 11.6.1 Viewing the details of the content that is running Press the INFO button on the remote control.  Software Versio n : Displays the software version o f a device  Device Name : Displays the name of a devic e recognized by the ser ver  Device ID : Displays th e origin[...]

221 MagicInfo Lite 11 11 MagicInfo Lite 11.6.2 Changing the settings fo r the content that is running Press the TOOLS button on the remote control. You can chan ge the Picture Mode or Sound Mode setting or safely remove a USB device ( Safely Remove USB ) while content is playing by pressin g the TOOLS button o n the rem ote cont rol.  Picture Mo[...]

222 12 Troubleshooting Guide 12 Troubleshooting Guide 12.1 Requirements Before Co ntacting Samsung Customer Service Center 12.1.1 Testing the Product Before calling Samsung Customer Service Center, test your prod uct as follows. If the problem persists, contact Samsung Customer Service Center. Check if your p roduct is op erating norm ally by using[...]

223 Troubleshooting Guide 12 12 Troubleshooting Guide 12.1.3 Check the followings. Installation issue (PC mode ) The screen keeps swit ching on and off. Check the cab le connec tion betwee n the product and PC, and e nsure the con nection is secure. ("2.2 Conn ecting and Using a PC") Blank spaces are fou n d at the top and bottom of the s[...]

224 Troubleshooting Guide 12 12 Troubleshooting Guide The screen is not clear. The screen is blurry. Adju st Coarse and Fine . Remove any accessories (vid eo extension cable, etc) an d try again . Set the resolution and frequency to the recommended level. The screen ap pears unst able and shaky . Check th at the reso lution and frequency of the PC [...]

225 Troubleshooting Guide 12 12 Troubleshooting Guide Remote control issue The remote con trol does not w ork. Make sure that the bat teries are cor rectly in place (+/ -). Check if the ba tteries are flat. Check for po wer failure. Make sure th at the pow er cord is connected . Check for any special lighting or neon sign s switched on in the vici [...]

226 Troubleshooting Guide 12 12 Troubleshooting Guide 12.2 Q & A Question Answ er How can I change the frequency? Set the frequ ency on you r graphics c ard.  "Windows XP": Go to Control Panel Appearan ce and Themes Display Settings Advanced Monitor and adjust the fr equency in Monitor Settings .  "Windows ME/ 2000": G[...]

227 Troubleshooting Guide 12 12 Troubleshooting Guide Refer to the user manual for your PC or graphics card for further instructions on adjustment.. How can I change the resolution?  "Windows XP": Go to Control Panel Appearanc e and Themes Display Settings and adjust the reso lution.  "Windows ME/2000" : Go to Control Pane[...]

228 13 Specifications 13 Specifications 13.1 General Model Name DE40C Panel Size 40 inches (101 cm) Display area 885.6 mm (H) x 498.15 mm (V) 34.866 inches (H) x 19.612 inc hes (V) Dimensions (W x H x D) 919.6 x 532.0 x 35.1 mm 36.2 x 20.9 x 1.4 inches Weight 13.5 kg / 29.8 Ibs VESA 200 x 200 mm / 7.9 x 7.9 inch es Model Name DE46C DE55C Panel Size[...]

229 Specifications 13 13 Specifications Plug-and-Play : This monitor can be installed and used with any Plug-and-Play compatible systems. Two-way data exchange between the monitor and PC system optimizes the monitor settings. Monitor installation takes place automatically. However, you can customize the installation settings if de sired. Due to the[...]

230 Specifications 13 13 Specifications 13.2 PowerSaver The power-sa ving funct ion of this p roduct redu ces power c onsumption by switching off the scree n and changing the co lor of the pow er LED if the prod uct is not used for a specified period of tim e. The power is not turned off in powe r-saving mode. To swit ch the screen back on, press a[...]

231 Specifications 13 13 Specifications 13.3 Standard Signal Mode Table  This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select[...]

232 Specifications 13 13 Specifications Horizontal Frequency The time required to scan a single line from the left to the right side of the screen is called a horizontal cycle. The reciprocal number of a horizontal cycle is called horizontal frequency. Horizontal frequency is measured in kHz. Vertical Frequency The product displays a single image m[...]

233 Specifications 13 13 Specifications 13.4 License Manufacture d under license fro m Dolby Lab oratories. Dolby and t he double-D symbol are trad emarks of Do lby Labora tories. Manufactured un der license unde r U.S. Patent #’s: 5,451,942; 5, 956,674; 5,974,380; 5,97 8,762; 6,487,53 5 & other U.S. and worldwide patents issued & pending[...]

234 Appendix Appendix Contact SAMSUNG WORLD WIDE If you have any questions or comments relati ng to Samsung products, please contact the SAMSUNG customer care center. NORTH AMERICA U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG (7 26-7864) h ttp://www.sam sung.com/ca http://www. samsung.co m/ca_fr (French) MEXICO 01-800[...]

235 Appendix Appendix GUATEMALA 1-800-299-001 3 h ttp://www.sam sung.com/latin (Spanish) http://www. samsung.co m/ latin_en (E nglish) HONDURAS 800-27919267 http://www.sam sung.com/latin (Spanish) http://www. samsung.co m/ latin_en (E nglish) JAMAICA 1-800-23 4-7267 http://www.samsung. com NICARAGUA 00- 1800-5077267 http://www.samsung.com/ latin (S[...]

236 Appendix Appendix Responsibility for the Pay Se rvice (Cost to Customers) When the service is requested, in spite of in warra nty, we may charge you for a visit from a service technician in the following cases. Not a product defect Cleaning of the product, Adjustme nt, Explanation, Re-installation and etc .  If a service tech nician gives in[...]

237 Appendix Appendix Optimum Picture Quality and Afterimage Burn-in Prevention Optimum Picture Quality  To enjoy the op timum picture quality, go to Control Panel on your PC and ad just the resolu tion and refresh rate as follows. Th e picture quality of TF T-LEDs may degr ade if the optimum resolution is not selected.  Resolution: 1920 X 10[...]

238 Appendix Appendix Prevention of Afterim age Burn-in What is afteri mage burn-in? Afterimage bu rn -in should not occur wh en the LCD pa nel is ope rating nor mally. Norma l operation refers to a continuously chan ging video patter n. If the LCD pane l displays a fixed patter n for an exten ded period of time (more than 1 2 hours), a slight volt[...]

239 Appendix Appendix  Powering Off, Screen Save r and Power Saving Mode  Power off th e product fo r 2 hours a fter using it f or 12 hour s.  Power off th e product fo r 4 hours a fter using it f or 20 hour s.  Go to Display Properties > Power Supply on your PC and set the product to power off as required.  Using a s creen saver [...]

240 Appendix Appendix Terminology Dot Pitch The product and scree n consist of red, gree n and blue dots. A short er distance between t he dots produces a hig her resolutio n. Dot pitch ref ers to the distan ce between the shortest di stance betw een dots of the same color. Dot pi tch is measured in millimeters. Vertical Frequency The product disp [...]

241 Appendix Appendix Multiple Display Control (MDC) MDC (Multiple Disp lay Control) is an ap plication that allows multiple displ ay devices to be cont rolled simultaneously using a PC. Commun ication between a PC and m onitor takes place using RS232C (serial data transmissio n) and RJ45 (LAN) cables. DVD (Digital Versatile Disc) DVD refers to a C[...]

Index 242 Index A Advanced Settin gs 113 AllShare Settings 137 Antenna 65 Antenna (Air/Cable) 123 Anynet+(HDMI-CEC) 162 Auto Adjustment 112 Auto Program 124 Auto Protection Time 152 B Batteries 33 Before Co nnecting 56 Before Install ing the Product ( Installation Guide) 36 Broadcast Audio Options 121 C Caption 146 Change PIN 151 Changing the Inp u[...]

Index Index 243 N Network Setting 126 Network Status 134 No Signal Power Off 145 P Parts 28 PC connection 57 PC Module Power 166 Photos 183 Picture Mode 107 Picture Options 116 Picture Size 109 PIP 151 Port 30 PowerSaver 230 Problem repo rt 222 Q Q & A 226 R Remote Control 32 , 41 Reset All 166 Reset Picture 118 Reset Sound 122 Reset System 165[...]