Samsung Digimax U-CA 401 Bedienungsanleitung

Thank you for buying a Samsung Camera. This manual will guide you through using the camera, including capturing images, downloading images and using the application software. Please read this manual carefully before using your new camera. ENGLISH User ' s Manual[...]

2 Instructions Use this camera in the following order Insert the USB cable Set up the camera driver Before connecting the camera to a PC, via the USB cable, you will need to set up the camera driver. Install the camera driver that is contained in the Application S/W CD-ROM.(p.75) Take a picture (p.22) Insert the supplied USB cable into the PC’s U[...]

3 Contents READY Getting to know your camera 5 About the icons 5 Danger 6 Warning 6 Caution 7 An FCC warning 7 This digital camera can be used for 8 Manufacturer's contents 10 Identification of features 11 Front & Top 11 Back 11 Bottom / 5-function button 12 Mode switch 12 Function Lamp 13 Connecting to a Power Source 14 Using the AC power[...]

4 Contents LCD monitor indicator 43 Using the camera buttons to adjust the camera 44 Thumbnail/ Enlargement button 44 Voice memo/ Up button 45 Delete/ DOWN button 46 LEFT / RIGHT/ MENU/ OK button 47 LCD button 47 Setting up the play back function using the LCD monitor 48 Deleting all images 49 Protecting images 49 Starting the slide show 50 Resize [...]

5 Getting to know your camera Thank you for buying a Samsung Digital Camera. Prior to using this camera, please read the user manual thoroughly. When you require After Sales service, please bring the camera and the cause of the camera malfunction (such as Batteries, Memory card etc.) to the A/S center. Please check that the camera is operating prop[...]

6 Danger Do not attempt to modify this camera in any way. This may result in fire, injury, electric shock or severe damage to you or your camera. Internal inspection, maintenance and repairs should be carried out by your dealer or Samsung Camera Service Center. Please do not use this product in close proximity to flammable or explosive gases, as th[...]

7 Caution Leaking, overheating, or burst batteries could result in fire or injury. Use batteries with the correct specification for the camera. Do not short circuit, heat or dispose of batteries in fire. Do not insert the batteries with the reverse polarities. Remove the batteries when not planning to use the camera for a long period of time. Batte[...]

8 This digital camera can be used for Printing images using a dedicated printer, DPOF-compatible printer or DPOF-equipped photo lab. (refer to page 53) Downloading image files from camera to computer. (refer to page 82) Editing images on a PC. (refer to page 89) Viewing images on a TV. (refer to page 62) Taking a picture. (refer to page 22)[...]

9 This digital camera can be used for Inserting images directly into any electronic document. Taking a favourite image and creating your own personalized calendar with it. You can even create your own unique gift wrap paper by using your digital images. Creation of a digital photo album. Recording your voice. (refer to page 22) Recording a movie cl[...]

10 Manufacturer's contents Please check that you have the correct contents before using this product. marked contents are optional. Digital Camera AV cable Pouch USB cable User manual Camera strap Product warranty Digimax Reader Software CD AC adapter(5V) Rechargeable battery(SLB-1037) Duracell CP-1 battery Memory Stick Duo[...]

11 Identification of features Front & T op Back Shutter button Function Lamp Viewfinder DC input connection point USB/ AV connection terminal Flash Lens Power button Microphone LCD monitor Viewfinder Autofocus lamp(Green) Flash status lamp(Red) Play mode / LCD button Strap eyelet Mode switch Speaker Zoom W button (Thumbnail) Zoom T button (Digi[...]

12 Identification of features Voice recording mode A movie clip can be recorded for as long as the available recording time of the memory capacity allows. Image size and type are listed below. - Image size : 640X480, 320X240 (User selectable) - Movie clip file type : *.avi (MJPEG) A voice recording can be recorded for as long as the available recor[...]

13 Identification of features Still image mode You can select from AUTO( ), Night( ), MYSET( ), TEXT( ) modes. Lamp Type Function Lamp Camera Status Lamp LCD Monitor When turning on the power Blue lamp blink and then turns off when the camera is ready to take a picture Green lamp blinks X When the camera is in focus (when the SHUTTER button is pres[...]

One LED blinks Two LEDs blink Three LEDs turn on Charging 0% charged. About 50% charged. About 100% charged. 14 Following function lamp indicates charging status of the rechargeable battery. Connecting to a Power Source Function lamp display (Blue LED) If the function lamp display does not work even after inserting the rechargeable battery and conn[...]

15 Connecting to a Power Source Important information about battery usage When the camera is not used, turn off the camera power. Please do not charge the non rechargeable battery. It may cause an explosion or fire. Please remove the batteries if the camera will not be used for long periods. Batteries can lose power over time and are prone to leaki[...]

16 Connecting to a Power Source Using the batteries Battery status Battery indicator The batteries are fully charged. Prepare new batteries. There is no battery capacity. Replace with new batteries. There are 3 indicators for battery condition that are displayed on the LCD monitor. Removing the battery 1. Turn off the camera power. Open the battery[...]

17 Precautions on Using the Memory Stick Duo This camera operates only with a Memory Stick Duo. Some models of Memory Stick Duo media do not have the write-protect switch (B). Card pins(A) Write protect switch(B) Label(C) [ Memory Stick Duo ] Front Back Do not touch the card pins (part A) with your fingers or with metal objects. Do not press hard w[...]

18 Precautions on Using the Memory Stick Duo Maintenance of the Memory Stick Duo (Hereafter the Memory Stick Duo is referred to as the "Memory Card".) The camera comes with 32MB of internal flash memory, allowing you to store images and movie clips in the camera. However, you can expand the memory capacity by using an optional memory card[...]

19 Inserting the memory card 1. Turn off the camera power and pull the battery chamber cover in the direction of the arrow to open. 2. Have the front of the memory card face toward the front of the camera (lens) and the card pins toward the back of the camera(LCD monitor), and then push the memory card into the card slot until you hear a click. 3. [...]

20 LCD monitor indicator No. Description Icons Page 1 Battery p.16 2 Recording mode p.12~13 3 Camera shake warning p.23 4 Flash p.28 5 Self-timer p.29 6 Macro p.26 7 Metering p.36 8 Exposure compensation LT p.40 9 Auto focus frame 10 Time 01:00 PM p.59 ~ 60 11 Date 2004/05/01 p.59 ~ 60 12 MS DUO indicator p.19 13 White Balance p.37 14 ISO p.36 The [...]

21 LCD monitor indicator 15 Sharpness p.39 16 Image quality p.35 17 Image size 2272, 2048, 1600, 1024, 640 p.34 18 Number of available shots remaining 29 Remaining time (Movie clip/ Voice recording) 00:01:50 / 01:00:00 p.21 ~ 22 19 Digital Zoom rate X4.0 p.25 20 Digital Zoom 21 Voice memo p.26 Starting the recording mode [ MOVIE CLIP mode ] S S T T[...]

22 Starting the recording mode Recording a still image Steps from 1-4 are the same as those for recording a movie clip. 5. Select the STILL IMAGE( ) mode by sliding the mode switch. 6. Point the camera towards the subject and compose the image by using either the viewfinder or LCD monitor. 7. Press the shutter button to capture an image. Recording [...]

23 Things to W atch Out for When T aking Pictures Pressing the shutter button down half way Lightly press the shutter button to confirm focus and flash battery charge. (See page 13) Press the shutter button all way down to take the picture. The available recording time may vary depending on shooting conditions and camera settings. When the Flash Of[...]

24 Using the camera buttons to adjust the camera The RECORDING mode function can be set up by using the camera buttons. POWER button SHUTTER button Used for digital zooming in / out. When you press the ZOOM W/T button, the zoom bar will display in the upper center part of the LCD monitor. ZOOM W button/ ZOOM T button Used for turning the camera’s[...]

25 ZOOM W button/ ZOOM T button TELE Zoom Digital zoom TELE : Pressing the ZOOM button T activates the digital zoom software. Releasing ZOOM T button stops the digital zooming at the required setting. Once the maximum digital zoom (4X) is achieved, pressing the ZOOM T button will have no effect. You can check the digital zoom rate with the [X1.1 ~ [...]

26 V oice memo( )/ UP button While the menu is showing, press the UP button to move up the submenu cursor. When the menu is not displayed on the LCD monitor, the UP button operates as the voice memo button. You can add your voice-over to a stored still image. Recording a voice memo 1. Select the STILL IMAGE mode by sliding the mode switch. 2. Press[...]

27 Fixed focus To focus on the subject positioned outside of the center, use the focus lock function. Using the Focus Lock 1. Ensure the subject in the center of the autofocus frame. 2. Press the SHUTTER button halfway. When the autofocus lamp (green) lights up, it means the camera is focused on the subject. Be careful not to press the SHUTTER butt[...]

28 FLASH( ) / LEFT button ICON Flash mode Description Flash mode indicator If the subject or background is dark, the camera flash will operate automatically. Auto flash Red eye reduction Fill in flash Slow synchro Flash off If a subject or background is dark, the camera flash will work automatically and will reduce the red-eye effect by using the r[...]

29 Self-timer( ) / Right( ) button Selecting the self-timer 1. Slide the mode switch to the STILL IMAGE mode. 2. Press the SELF-TIMER button until the desired mode indicator displays on the LCD monitor. A 10 second, 2 second or Double self-timer icon appears on the LCD monitor. 10SEC self-timer ( ) : Pressing the shutter button will allow an interv[...]

30 MENU/ OK button If the menu is displayed, use the 5-Function buttons to change the data values and for your changes to be accepted If the menu is not displayed, press the MENU/OK button to display a menu for the current camera mode on the LCD monitor. Press the button again to return to the previous state. [ Menu on ] [ Menu off ] Pressing the M[...]

31 Using the LCD monitor to adjust the camera You can use the menu on the LCD monitor to set up recording functions. The following functions are available, depending on the mode you have selected. The menu will not be displayed on the LCD monitor in the following circumstances: - When another button is being operated. - While image data is being pr[...]

32 Using the LCD monitor to adjust the camera Menu tab Main menu Sub menu Camera working mode MULTI SPOT AUTO 100 200 400 NORMAL B & W SEPIA SINGLE CONTINUOUS AEB SOFT NORMAL VIVID AUTO 1/8, 1/4, 1/2, 1, 2, 4, 8 SEC WHITE BALANCE METERING ISO EFFECT SHOOTING SHARPNESS EXPOSURE MANUAL EXPOSURE AUTO DAYLIGHT CLOUDY SUNSET FLUORESCENT TUNGSTEN +2.[...]

33 How to use the menu 3. Use the UP and DOWN buttons to select a sub menu. 4. Select a sub menu, and then press the OK button. The value you set will be saved and the menu will disappear. 1. Turn on the camera and press the MENU button. A menu for each camera mode appears. However, there is no menu for Voice Recording mode ( ). 2. Use the LEFT and[...]

34 Mode You can select the image size appropriate for your application. Fixed as [2272X1704] in the TEXT mode. Icon 2272 2048 1600 1024 640 640 320 Size 2272x1704 2048x1536 1600x1200 1024x768 640x480 640x480 320x240 The higher the resolution, the lower the remaining shots will be because high resolution images require more memory than lower resolut[...]

35 Quality You can select the compression ratio appropriate for your application of the captured images. The higher the compression ratio, the lower the picture quality. Fixed as [FINE] in the TEXT mode. Mode Icon Sub menu S.FINE FINE NORMAL File Format jpeg jpeg jpeg STILL IMAGE mode Image Size and Quality for the Number of Images that can be save[...]

36 Metering If you cannot obtain suitable exposure conditions, you can change the metering method to take brighter pictures. MULTI( ) : Exposure will be calculated based on an average of the available light in the image area. However, the calculation will be biased towards the centre of the image area. This is suitable for general use. SPOT ( ) : O[...]

37 White balance : The white balance control allows you to adjust the colours to appear more natural looking. White balance - AUTO : The camera automatically selects the appropriate white balance settings, depending on the prevailing lighting conditions. - DAYLIGHT : For taking images outside. - CLOUDY : For taking images under a cloudy and overcas[...]

38 Shooting - SINGLE: A picture will be taken each time you press the Shutter button. - CONTINUOUS: Press and hold the shutter button, and images are captured continuously. This can be used for taking a moving subject. Use this to take pictures of moving objects/people. * Five continuous shots are supported regardless of resolution and image qualit[...]

39 Sharpness You can adjust the sharpness of the picture you want to take. You cannot check the sharpness effect on the LCD monitor before you take a picture, because this function is applied only when the captured image is stored on the memory. [ STILL IMAGE mode ] Sub menu Icon Description The edges of the image are softened. This effect is suita[...]

40 Exposure MANUAL EXPOSURE AUTO 1/8 SEC 1/4 SEC 1/2 SEC Manual Exposure (Night Mode) Whilst the camera automatically adjusts the best shutter speed and iris values according to the situation, the user can manually set the shutter speed in Night Scene mode. Configuring manual exposure (LT: Long Time Shutter) 1. Press the menu button in normal camer[...]

41 Starting play mode If the memory card is inserted in the camera, all the camera functions apply only to the memory card. If the memory card is not inserted in the camera, all the camera functions apply only to the internal memory. Press and hold the play mode button for 2 seconds to select play mode. The camera plays images saved in the memory c[...]

42 Starting play mode Playing back a movie clip Steps from 1-2 are the same as those to play back a still image. 3. Select the recorded movie clip that you want to play back by using the LEFT/RIGHT button. If you select a movie clip, the movie clip indicator ( ) will be displayed on the LCD monitor. 4. Press the shutter button to play back a movie [...]

43 LCD monitor indicator The LCD monitor displays information about the shooting conditions. No. Description Icon Page 1 Battery p.16 2 Play mode 3 File Type 4 Protect indicator p.49 ~ 50 5 Voice memo p.45 ~ 46 6 DPOF indicator p.53 7 Stored image number 9 SIZE : 2272X1704 Size AV : F3.2 Aperture value TV : 1/60 S Shutter speed ISO : 100 ISO sensit[...]

44 Using the camera buttons to adjust the camera In Play mode, you can use the buttons on the camera to conveniently set up the Play mode functions. Image enlargement 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function button. 3. Pressing the thumbnai[...]

45 Thumbnail ( ) / Enlargement( ) button When playing, 8X zoom is available regardless of the image resolution. Trimming : You can extract part of the image that you want and save it separately. 1. Select an image that you want to enlarge and press the enlargement button. 2. Different parts of the image can be viewed by pressing the 5 function butt[...]

46 V oice( ) memo / Up button 4. The recording can be stopped by pressing the shutter button again. 5. The ( ) icon will be displayed on the LCD monitor after voice memo recording has finished. - Voice memos can’t be recorded onto movie clip files. - A distance of 40cm between you and the camera (microphone) is the best distance to record sound. [...]

47 LEFT / RIGHT/ MENU/ OK button LEFT / RIGHT/ MENU/ OK buttons activate the following. - LEFT button : While the menu is showing, press the LEFT button to select the menu tab to the left of the cursor. - RIGHT button : While the menu is showing, press the RIGHT button to select the menu tab to the right of the cursor, or to move an auxiliary menu.[...]

48 Setting up the play back function using the LCD monitor PLAY mode functions can be changed by using the LCD monitor. In the PLAY mode, pressing the MENU button displays the menu on the LCD monitor. The menus you can set up in Play mode are as follows. Press and hold the Play mode button for 2 seconds to return to shooting mode from play mode. Me[...]

49 Deleting all images Of all the files stored in the memory card, the unprotected files in the DCIM subfolder will be deleted. Deleting All images 1. Press and hold the Play mode button for 2 seconds, and press the menu button. 2. Press the LEFT/ RIGHT button and select the [DEL.ALL] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN [...]

50 Protecting images Images can be displayed continuously at pre-set intervals. You can view the slide show by connecting the camera to an external monitor. 1. Press and hold the Play mode button for 2 seconds, and press the Menu button. 2. Press the LEFT/ RIGHT button and select the [SLIDE] menu tab. 3. Use the UP and DOWN buttons to select the de[...]

51 Starting the slide show You can change the resolution (size) of saved pictures. The pictures are saved under different names. 1. Press and hold the Play mode button for 2 seconds, and press the Menu button. 2. Press the LEFT/ RIGHT button and select the [RESIZE] menu tab. 3. Select a desired sub menu by pressing the UP/ DOWN button and press the[...]

52 COPY T O CARD If the function is used without an inserted memory card, the [NO CARD !] message is displayed, and the Play mode screen is displayed. If there is not enough space available in the memory card to copy saved images in the internal memory (32MB), the [COPY TO CARD] command will copy only some of the images and display [CARD FULL!] mes[...]

53 DPOF This function allows you to embed print quantity information on a stored image. 1. Press and hold the Play mode button for 2 seconds, and press the Menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [STANDARD] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Use the UP and DOWN butt[...]

54 DPOF : INDEX You can cancel the [STANDARD], [INDEX] settings. Cancel the setting to reset the value to its default. 1. Press and hold the Play mode button for 2 seconds, and press the Menu button. 2. Press the LEFT/ RIGHT button and select the [DPOF] menu tab. 3. Select the [CANCEL] menu by pressing the UP/ DOWN button and press the RIGHT button[...]

55 Setup menu In this mode, you can set up basic settings. You can use the setup menu in all camera modes, except Voice Recording mode. The items indicated by are default settings. Menu tab Main menu Sub menu Secondary menu Page RESET - SERIES - ENGLISH ESPAÑOL ITALIANO FRANÇAIS DEUTSCH NO - YES - 04/05/01 13:00 - Y/M/D - M/D/Y - D/M/Y - OFF - DA[...]

56 Setup menu This function allows the user to select the file naming format. Assigning File Names 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [FILE] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desire[...]

57 Auto power off Even if the batteries or AC adapter are removed and inserted again, the power off setting will be preserved. Note that the automatic power off function will not operate if the camera is in PC mode, slide show, playing back a voice recording or movie clip. INFORMA TION Setting Power Off 1. In any mode with the exception of Voice Re[...]

58 Language Setting Language 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the [LANGUAGE] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by pressing the UP/ DOWN button and press the OK button[...]

59 Setting up the Date/ T ime/ Date type You can change the date and time that will be displayed on the captured images and set up the date type. Setting Date/Time & Selecting Date type 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [SETUP] menu tab. 3. Select the[...]

60 Imprinting the recording date The Date & Time are imprinted at the bottom right side of the still image. The date will be imprinted as a DATE TYPE setting. TIME is imprinted in the following way : [Hour : Minute] and hours are shown using the 24 hour clock. The imprint function is applied only to still images. INFORMA TION Sound If a sound o[...]

61 Initialization(RESET ALL) Function lamp All camera menu and function settings will be restored to their default values. However, values for DATE/TIME, LANGUAGE, and VIDEO OUT will not be changed. Initializing the Camera 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select th[...]

62 Selecting V ideo out type The Movie output signal from the camera can be NTSC or PAL. Your choice of output will be governed by the type of device (monitor or TV, etc.) to which the camera is connected. PAL mode can support only BDGHI. Setting the Video Out Type 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2.[...]

63 Quick view If you enable Quick View before capturing an image, you can view the image you just captured on the LCD monitor for the duration set in the [Q.VIEW] setup. Quick view is possible only with still images. Setting Quick View 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button [...]

64 Setting up the MYCAM menu You can set up a start up image, start up sound and shutter sound. Every camera working mode (with the exception of Voice recording mode) has the MYCAM menu. The items indicated by are default settings. Menu tab Main menu Sub menu Page OFF IMAGE 1 IMAGE 2 OFF SOUND 1 SOUND 2 SOUND 3 OFF SOUND 1 SOUND 2 SOUND 3 S.IMAGE S[...]

65 Start up sound You can select the shutter sound. Selecting the Shutter Sound 1. In any mode with the exception of Voice Recording mode, press the MENU button. 2. Press the LEFT/ RIGHT button and select the [MYCAM] menu tab. 3. Select the [SH.SOUND] menu by pressing the UP/ DOWN button and press the RIGHT button. 4. Select a desired sub menu by p[...]

66 Important notes Be sure to observe the following precautions! This unit contains precision electronic components. Do not use or store this unit in the following locations. - Areas exposed to severe changes in temperature and humidity. - Areas exposed to dust and dirt. - Areas exposed to direct sunlight or the inside of a vehicle in hot weather. [...]

67 If the camera is exposed to an electronic interference, it will turn itself off to protect the memory card. Camera Maintenance - Use a soft brush (available from photo stores) to gently clean the lens and LCD assemblies. If this does not work, lens-cleaning paper with lens cleaning fluid can be used. Clean the camera body with a soft cloth. Do n[...]

68 W arning indicator There are several warnings that may appear on the LCD display Warning indicator Causes Remedy Insert a new CARD or delete stored images to free up some memory. There is insufficient memory capacity to take an image. When taking pictures in dark places. The memory card is locked. There are no images stored on the internal memor[...]

69 Before contacting a service center Please check the following Symptom Causes Remedy - Insert fresh batteries - Connect an AC Power Adapter - There is low battery capacity - An AC Power Adapter is not connected - The batteries are exhausted - The Camera is turned off automatically. - The Adapter plug is not connected securely - The Camera is bein[...]

70 Before contacting a service center Symptom Causes Remedy Remove / re-insert batteries and switch camera on Camera malfunction Incorrect memory card format White balance setting is incorrect. Exposure is excessive. The camera buttons do not operate A card error has occurred while the memory card is in the camera. Colour of image is different to t[...]

71 Specification Type 1/2.5" CCD Effective Pixels Approx. 4.0 Mega –pixel Total Pixels Approx. 4.2 Mega –pixel SHD Lens f=5. 8mm (35mm film equivalent : 35mm) F No. F.3.2 Still Image mode: 1.0X~ 4.0X, Play mode: 1.0X~8.0X Optical Viewfinder Optical virtual image viewfinder LCD Monitor 1.5" color TFT LCD Type TTL Auto Focus Normal: 60c[...]

72 Specification Internal memory: 32MB flash memory External memory (optional):MS Duo (Upto128MB guaranteed) Still Image: JPEG (DCF), DPOF, EXIF Movie Clip: AVI (MJPEG) Audio : WAV 2272: 2272X1704, 2048: 2048X1536, 1600: 1600X1200, 1024: 1024X768, 640: 640X480 2272 : Super fine 14, Fine 28, Normal 43 2048 : Super fine 16, Fine 35, Normal 53 1600 : [...]

73 Software Notes Please ensure that you read the instruction manual carefully before use. The attached software is a camera driver and image editing software tool for Windows. Under no circumstances should all or part of either the software or the user manual be reproduced. Copyrights for software are licensed only for use with a camera. In the un[...]

74 About the software After inserting the CD-ROM provided with this camera into the CD-ROM drive, the following window should automatically run. Before connecting the camera to the PC, you should first install the camera driver. Camera driver : This enables images to transfer between the camera and PC. This camera uses the USB Storage Driver as the[...]

75 To use this camera with a PC, install the application software first. After this has been done, the stored images in the camera can be moved to the PC and can be edited by an image editing program. You can visit the Samsung web-site through the internet. http://www.samsungcamera.com : English http://www.samsungcamera.co.kr : Korean Setting up th[...]

76 Setting up the application software If you select [Exit] at the step 3, the application program installation will be cancelled. INFORMA TION If you select [Cancel] at step 4, a window for installing PhotoImpression will be displayed. INFORMA TION 3. A window for which you can select application software will be displayed. Select the application [...]

77 Setting up the application software 8. Digimax Viewer installation is successfully completed. Click the [Finish] button to install PhotoImpression.The system will not reboot even the [Yes, I want to restart the computer now] option is selected. *The frame 8 may not appear according to the system requirements. 9. Digimax Viewer Installation is co[...]

78 Setting up the application software 12. A destination selection window will open. Click [Next >]. To copy to the files to another folder, click [Browse...] and choose a folder you want. 13. The [Select Components] window will appear. Click [Next >] button. 14. A window will open, asking you to choose a folder to which program icons will be[...]

79 Setting up the application software 17. After restarting the computer, connect the PC to the camera with the USB cable. 18. Turn the camera power on. [Found New Hardware Wizard] will open and the computer will recognize the camera. If you have ever installed an image viewer program or your OS is Windows XP, an image viewer program will open. If [...]

80 Setting up the application software If you have installed the camera driver, [Found New Hardware Wizard] may not open. On a Windows 98 or 98 SE system, the Found New Hardware Wizard dialog box opens and a window asking you to select a driver file may appear. In this case, specify the [USB Driver] folder on the supplied software CD. When connecti[...]

81 Starting PC Mode The camera driver must be installed before using PC mode. For driver installation instructions, please refer to p.75. To save battery power, it is recommended that you use an AC adapter (Optional) when connecting the camera to a computer. INFORMA TION If you insert the USB cable into the USB connection terminal, the camera mode [...]

82 Starting PC Mode 3. Select an image and press the right mouse button. 4. A pop-up menu will open. Click [Cut] or [Copy] menu. - [Cut] : cuts a selected file. - [Copy] : copies files. Downloading stored images You can download the still images stored on the camera to your PC's hard disk and print them or use a photo editing software to edit [...]

83 Starting PC Mode 6. Press the right mouse button and a pop-up menu will open. Click [Paste]. 7. An image file is transferred from the camera to your PC. - By using [Digimax Viewer], you can see the stored images in the memory directly on the PC monitor and you can copy or move the image files.[...]

84 Removing the USB Driver for Windows 98SE To remove the USB driver, refer to the process shown below. 1. Trace [Start Settings] and click [Control Panel]. [Click !] 4. Uninstallation is complete. Click the [Finish] button and the window will disappear. [Click !] 2. Double-click [Add/Remove programs]. 3. The [Add/Remove Programs Properties] window[...]

85 Removable Disk To use this camera as a Removable Disk, install (p.75) the USB Driver. 1. Before turning the camera power on, connect the camera to the PC with the USB cable. 2. Click [Removable Disk] under [My computer] or [Windows Explorer]. 3. Image files stored in the Removable Disk (DCIM 100SSCAM) can be transferred to the PC. Important info[...]

86 Removing the removable disk [Click!] [Double-click!] [Click!] [Click!] Windows 98SE 1. Check whether the camera and PC are transferring a file. If the auto focus lamp blinks, you have to wait until the lamp illuminates. 2. Unplug the USB cable. Windows 2000/ME/XP (The illustrations may be different from the real display in accordance with the Wi[...]

87 Removing the removable disk 1. A USB Driver for MAC is not included with the software CD as MAC OS supports the camera driver. 2. Check the MAC OS. You can check the MAC OS version during MAC OS start-up. This camera is compatible with MAC OS 9.0 ~ 10.2. 3. Connect the camera to the Macintosh and turn the camera power on. 4. A new icon will be d[...]

88 Digimax V iewer 2.1 This software is only compatible with Windows. 1. To open Digimax Viewer, click the [Start Programs Samsung Digimax Viewer 2.1 Digimax Viewer 2.1 ] and Digimax Viewer 2.1 will then open. 2. If the [Auto Launch] option is selected, this program will be executed automatically with recognizing the camera. Before deleting images [...]

You can use PhotoImpression to perform the following tasks. With PhotoImpression, you can edit or store still images that you downloaded from the camera. This software is only available in Windows version. To start the program, click [Start Programs ArcSoft PhotoImpression PhotoImpression]. The following screen will appear. [ Command Button ] [ Too[...]

90 Please check the following if the USB connection malfunctions. [Case 1] The camera power is off. Turn the camera power on. We recommend using an AC power adapter in PC mode. [Case 2] USB Driver is not installed correctly. Install the USB Driver correctly. Refer to page 75. [Case 3] The USB cable is not connected or you are using a cable with an [...]

91 FA Q [Case 4] The camera is not recognized by your PC. Sometimes, the camera may appear under [Unknown Devices] in Device Manager. Install the camera driver correctly. Turn off the camera, remove the USB cable, plug in the USB cable again, and then turn on the camera. [Case 5] There is an unexpected error during file transfer Turn the camera pow[...]

92 FA Q [Case 9] When I open the Device Manager (by clicking Start (Settings) Control Panel (Performance and Maintenance) System (Hardware) Device Manager), there are Unknown Devices or Other Devices entries with a yellow question mark(?) beside them or devices with an exclamation mark(!) beside them. Right-click on the entry with the question(?) o[...]

93 FA Q 1) When the movie clip plays back, only the sound plays back without the image. It isn't compatible with the Mogen MJPEG Decorder. Uninstall the Mogen MJPEG Decorder as following order. Click [Start Run] and a window will open. Type "regsvr32 /u m3jpgdec.ax" and press the Enter key. Most problems will be solved with those rem[...]

94 MEMO[...]

95 MEMO[...]

6806-1904 SAMSUNG TECHWIN CO., LTD. OPTICS & DIGITAL IMAGING DIVISION 145-3, SANGDAEWON 1-DONG, JUNGWON- GU,SUNGNAM-CITY, KYUNGKI-DO, KOREA 462-121 TEL : (82) 31-740-8086,8088, 8090, 8092, 8099 FAX : (82) 31-740-8398, 8111 SAMSUNG OPTO-ELECTRONICS AMERICA, INC. HEADQUARTERS 40 SEAVIEW DRIVE, SECAUCUS, NJ07094, U.S.A. TEL : (1) 201-902-0347 FAX [...]