Samsung HP-P3761 Bedienungsanleitung

Owner ’ s Instructions HP-P3761 This device is a Class B digital apparatus.[...]

2 Impor tant W arranty Information Regarding T elevision Format V iewing W ide screen format PDP Displays (16:9, the aspect ratio of the screen width to height) are primarily designed to view wide screen format full-motion video. The images displayed on them should primarily be in the wide screen 16:9 ratio format, or expanded to fill the screen if[...]

3 Screen Image retention Do not display a still image (such as on a video game) on the plasma display panel for more than several minutes as it can cause screen image retention. This image retention is also known as “screen burn”. T o avoid such image retention, refer to page 38 of this manual to reduce the degree of brightness and contrast of [...]

General Information Y our New Plasma Display Panel ......................6 Remote Control Buttons ..................................8 W all Installation Instructions ..........................10 How to Assemble the Stand-Base ..................12 Connections Connecting VHF and UHF Antennas ..............14 Connecting Cable TV ......................[...]

PLASMA DISPLA Y P ANEL General Information Y our New Plasma Display Panel ......................................................6 Remote Control Buttons ..................................................................8 W all Installation Instructions ..........................................................10 How to Assemble the Stand-Base .....[...]

Front Panel Y our New Plasma Display Panel 6 Œ SOURCE (TV , A V1, A V2, S-VIDEO, COMPONENT1, COMPONENT2, and DVI) External input selection. ´ MENU Menu display . ˇ - VOL + V olume adjustment. Also used to select or adjust items on the on-screen menu. ¨ CH Channel selection. Also used to move up or down in the on-screen menu. ˆ Confirm your cho[...]

7 Rear Panel Œ DVI INPUT (DVI-D / L-AUDIO-R) Connect to the digital video and audio output jack of a device with DVI output. • DVI Video Input terminal (Not compatible with PC) ´ MONITOR OUT (VIDEO / L-AUDIO-R) Outputs for external devices. ˇ ONL Y FOR SER VICE Connector for ser vice only . ¨ S-VIDEO / L-AUDIO-R (A V2) V ideo and audio inputs[...]

Remote Contr ol Buttons Œ POWER button Tu r ns the PDP on and off. ´ ASPECT button Changes the screen size. ˇ Number buttons ¨ +100 button Press to select channels over 100. For example, to select channel 121, press “+100”, then press “2” and “1.” ˆ MUTE button Mutes the PDP sound. Ø VOL (V olume) buttons Adjust volume. ∏ SLEEP [...]

¸ SRS TSXT button Selects T ruSurround XT mode. ˛ MTS button Chooses stereo, mono or Separate Audio Program (SAP broadcast). ◊ AUTO PROG. button The TV automatically cycles through all of the available channels and stores them in memor y . ± ADD/DEL button Adds or deletes channels in the TV’ s memor y . ≠ DNIe button Activates DNIe (Digita[...]

W all Installation Instructions 1 Do not install the PDP on any location other than a vertical wall. 2 To protect the performance of the PDP and prevent problems, avoid the following locations: • Next to smoke and fire detectors. • Areas subjected to vibration or high voltage. • Near or around any heating apparatus. 3 Use only recommended par[...]

11 1 Remove the screws from the back of the PDP . 2 Connect insulation holders to screws (see the illustration below). • If you are uncertain about installation, hire a specialist to install the wall mount bracket. • Be sure to check that the insulation holders are completely secured on both the left and right side after hanging the PDP on the [...]

➤ ➤ T wo or more people should carry the PDP . Never lay the PDP on the floor because of possible damage to the screen. Always store the PDP upright. 12 1 Assemble the PDP with the stand and firmly secure the PDP using 4 screws provided. How to Assemble the Stand-Base[...]

PLASMA DISPLA Y P ANEL Connections Connecting VHF and UHF Antennas ..............................................14 Connecting Cable TV ....................................................................15 Connecting a VCR ........................................................................17 Connecting a Camcorder ............................[...]

Connecting VHF and UHF Antennas 14 Antennas with 75-ohm Round Leads If your antenna looks like this: it has 75-ohm round leads. 1 Plug the antenna lead into the VHF/UHF terminal on the PDP . Use the antenna cable included in the product package.[...]

15 Connecting Cable TV Y ou can connect different cable systems to your PDP , including cable without a cable box, and cable with a cable box that descrambles some or all channels. Cable without a Cable Box 1 Plug the incoming cable into the VHF/UHF terminal on the PDP . Use the antenna cable included in the product package. Cable with a Cable Box [...]

16 Cable with a Cable Box that Descrambles Some (But Not All) Channels To complete this connection you will need a two-way splitter , an RF (A/B) switch, and four coaxial cables (which you can buy from your Samsung dealer or any electronics store). 1 Find and disconnect the cable that is connected to the ANTENNA IN terminal of your cable box. This [...]

17 Connecting a VCR Connecting a VCR to the Video or S-Video/Audio jack S-Video cable Audio cable V ideo cable Power cord Connect the video/audio cables between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and VIDEO or S-VIDEO / L - AUDIO - R output jacks on the VCR. (Note: For better video, use an S-Video cable.) Note • Please be sure t[...]

18 Connecting a Camcorder Connect a Video/Audio cable between the VIDEO or S-VIDEO / L - AUDIO - R jacks on the PDP and the VIDEO or S-VIDEO /AUDIO output jacks on the camcorder . (Note: For better video, use an S-VIDEO cable.) Note • Please be sure to match the color-coded input terminals and cable jacks. Viewing T apes 1. T ur n on your PDP . 2[...]

19 Connecting a DVD Player (480i, 480p) This PDP displays the optimum picture in 720p mode. Playing DVD Connect a video cable between the Y , P b , P r (COMPONENT1, 2) input jacks on the PDP and Y/P B /P R output jacks on the DVD player . Connect an audio cable between the AUDIO L/R(COMPONENT1, 2) input jacks on the PDP and the AUDIO output jacks o[...]

Connecting a DTV Receiver (480p, 720p, 1080i) This PDP displays the optimum picture in 720p mode. 20 W atching DTV Connect the cable or antenna to the antenna input jack on the DTV . Connect a video cable between the Y , P b , P r (COMPONENT 1, 2) or DVI jack on the PDP and the Y , P B , P R (COMPONENT) or DVI output jacks on the DTV receiver . Con[...]

PLASMA DISPLA Y P ANEL Operation Tu r ning the PDP On and Off ..........................................................22 Plug & Play Feature ......................................................................24 Memorizing the Channels..............................................................27 Setting Up Y our Remote Control ..........[...]

Tu rning the PDP On and Off 22 Tu rning the PDP On and Off Press the POWER button on the remote control. The PDP will be turned on and you will be ready to use its features. Y ou can also use the POWER ( ) button on the front of the PDP . Note • If your PDP isn’t turned on when the power button is pressed: Press the MODE button to check if the [...]

23 Displaying Status Information Press the INFO button on the remote control. The PDP will display the Picture mode, Sound mode, MTS, Caption, and Clock. Air 4 Mono V -Chip Picture : Dynamic Sound : Custom MTS : Stereo Clock : 12 : 00 am CC[...]

24 Plug & Play Feature The first time the television is powered ON, several basic settings proceed automatically and subsequently . The following settings are available. 1 If the television is in standby mode, press the POWER button on the remote control. 2 Select the appropriate language by pressing the ▲ or ▼ button. 3 Press the ENTER but[...]

5 Select the correct signal source (Air , STD, HRC, and IRC) by pressing the ▲ or ▼ button, then press the ENTER button. 6 To start the channel search, press the ENTER button. 7 Press the ENTER button. Press the œ or √ button to move to the Hour , Minute, or am/pm. Set the Hour , Minute, or am/pm by pressing the ▲ or ▼ button. Press the [...]

26 Plug & Play Feature (continued) If you want to reset this feature... 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Plug & Play”. Press the ENTER [...]

27 Selecting the Video Signal-source Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the PDP (i.e., an antenna or a cable system). 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ENTER button to [...]

28 Storing Channels in Memor y (Automatic Method) 1 First, select the correct signal source (Air , STD, HRC, and IRC). See steps on previous page. Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Auto Program”, then press the ENTER button. 3 Press t[...]

29 Adding and Erasing Channels (Manual Method) First, press the CH or CH button or the number buttons to select the channel you want to add or delete. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Add/Delete”, then press the ENTER button. Repea[...]

30 To View Memorized Channels (PIP Mode) 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Scan”, then press the ENTER button. Only the memorized channels are chosen. 3 Press the MENU button to stop. Air/CA TV : Air √ Auto Program √ Add/Delete [...]

31 Changing Channels Using the Channel Buttons Press the CH or CH button to change channels. When you press the CH or CH button, the PDP changes channels in sequence. Y ou will see all the channels that the PDP has memorized. (The PDP must have memorized at least three channels.) Y ou will not see channels that were either erased or not memorized. [...]

32 Setting Up Y our Remote Contr ol This PDP's remote control can operate almost any VCR, Cable box or DVD. After it has been set up properly , your remote control can operate in five different modes: TV , VCR, CA TV , DVD, or STB. Pressing the corresponding button on the remote control allows you to switch between these modes, and control whi[...]

33 Remote Control Codes VCR Codes Cable Box Codes DVD Codes[...]

34 Setting the Signal Source 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ENTER button to select “Source List”. 3 Press the ▲ or ▼ button to select signal source, then press the ENTER button. 4 Press the MENU button to exit. Note • When you connect equipment to the PDP , you can choose between the fol[...]

Assigning Names to External input mode 1 Press the MENU button. Press the ENTER button to select “Input”. 2 Press the ▲ or ▼ button to select “Edit Name”, then press the ENTER button. 3 Press the ENTER button. Press the ▲ or ▼ button to select external device, then press the ENTER button. • Y ou can select the VCR, DVD, Cable STB,[...]

[...]

PLASMA DISPLA Y P ANEL Picture Contr ol Customizing the Picture ................................................................38 Using Automatic Picture Settings ....................................................39 Selecting the Color T one ................................................................40 DNIe (Digital Natural Image engine) ..[...]

Customizing the Picture Y ou can use the on-screen menus to change the Contrast, Brightness, Sharpness, Color , and T int settings of your PDP . 38 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Custom”, then press the ENTER button. Y ou will al[...]

39 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ▲ or ▼ button to select “Dynamic”, “Standard”, “Movie”, or “Custom” picture setting, then press the ENTER button. 4 Press the MENU button to exit. • Choose Dyn[...]

40 Selecting the Color T one 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Color T one”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Cool2”, “Cool1”, “Normal”, “W arm1”, or “W ar m2”, then press the[...]

DNIe (Digital Natural Image engine) Samsung’ s new technology brings you more detailed images with contrast, white enhancement and 3D noise reduction. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “DNIe”, then press the ENTER button. 3 Press t[...]

42 Changing the Screen Size Screen size selection depends on the type of video input(DVD, etc.). 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Size”, then press the ENTER button. 3 Press the ▲ or ▼ button to select the screen size you want,[...]

43 Notes • In TV , VIDEO, S-VIDEO and Component (480i) modes, all screen modes can be selected. (16:9 ➞ Panorama ➞ Zoom ➞ 4:3). •I n DVI mode, only 16:9 & 4:3 modes can be selected. • In Component (480p, 720p. 1080i) modes, Panorama mode can’t be selected. • In Component (480p, 720p. 1080i) modes, you can move the picture on scr[...]

44 Still Press the STILL button on the remote control to freeze a moving picture. Press again to cancel. Still mode will automatically be released in 5 minutes to help avoid screen burn. Freezing the Picture[...]

Selecting the PIP Screen 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ENTER button, then press the ▲ or ▼ button to select “On”. The PIP image will appear in the corner of the screen. •P[...]

Selecting an External Signal Y ou can use PIP to view a signal from an exter nal source, such as a VCR. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Source”, then [...]

47 Swapping the Contents of the PIP and Main Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Swap”, then press the ENTER button. • The image in the PIP window[...]

48 Changing the Size of the PIP Window 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Size”, then press the ENTER button. 4 Press the ▲ or ▼ button to select opt[...]

49 Changing the Location of the PIP Image 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Position”, then press the ENTER button. 4 Press the ▲ or ▼ button to sel[...]

50 Selecting a Signal Source (Antenna or Cable) for PIP If the PIP source is TV while PIP is ON, you can select a different broadcasting source for the PIP picture from the main picture. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then [...]

51 51 Changing the PIP Channel 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 4 Press the ▲ or ▼ button to change the chan[...]

52 Setting the My Color Contr ol Mode My Color Control mode allows users to adjust colors to according to their preferences, by adjusting skin, sky , and grass tones using the predefined settings (Standard, Custom, Blue, Green, and Pink) without affecting other colors on the screen. Using the My Color Control Function in the Easy Control Menu Skin,[...]

53 53 My Color Control Mode Characteristics Using My Color Control mode, you can enjoy vivid colors as shown below . Note •I mages shown above may differ from the actual adjustment on the screen. These images are presented for illustrative purposes. ➤ ➤ Standard Picture. ➤ ➤ Emphasizes Clear Blues. ➤ ➤ Emphasizes Mild Greens. ➤ ➤ [...]

54 Setting the My Color Contr ol Mode My Color Control Custom Settings Users can adjust the 3 My Color Control colors (Pink, Green, and Blue). 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “My Color Control”, then press the ENTER button. 3 Press[...]

55 55 Resetting the My Color Control Colors to the Factor y Defaults To return to the factor y default settings for My Color Control colors, use the Reset function. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “My Color Control”, then press the[...]

[...]

PLASMA DISPLA Y P ANEL Sound Contr ol Customizing the Sound ................................................................58 Using Automatic Sound Settings ....................................................59 Choosing a Multi-Channel Sound (MTS)Soundtrack ..........................60 Using the Auto V olume ......................................[...]

58 Customizing the Sound 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Custom”, then press the ENTER button. 3 Select the option (volume, balance, and equalizer) to be adjusted by pressing the œ or √ button. Press the ▲ or ▼ button to adju[...]

59 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ENTER button to select “Mode”. 3 Press the ▲ or ▼ button to select “Standard”, “Music”, “Movie”, “Speech”, or “Custom” sound setting, then press the ENTER button. 4 Press the MENU button to exit. • Ch[...]

60 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “MTS”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Mono”, “Stereo” or “SAP”, then press the ENTER button. 4 Press the MENU button to exit. • Choose Stereo Ste[...]

61 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Auto V olume”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “On”, then press the ENTER button. • Pressing the ▲ or ▼ button will alternate between “On” and “[...]

62 Setting T ruSurr ound XT Tr uSurround XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. T ruSurround delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television speakers. It is fully compatible with all multichannel fo[...]

Listening to the Sound of the Sub(PIP) Picture When the PIP feature is activated, you can listen to the sound of the sub picture. 63 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “PIP”, then press the ENTER button. 3 Press the ▲ or ▼ button [...]

64 Selecting the Internal Mute The internal speakers can be muted in order to hear sound from external speakers you've connected. 1 Press the MENU button. Press the ▲ or ▼ button to select “Sound”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Internal Mute”, then press the ENTER button. 3 Press the ▲ or ?[...]

PLASMA DISPLA Y P ANEL Channel Contr ol Fine T uning Channels ....................................................................66 LNA (Low Noise Amplifier) ............................................................67[...]

66 Fine T uning Channels Use fine tuning to manually adjust a particular channel for optimal reception. 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Fine T une”, then press the ENTER button. 3 Press the œ or √ button to adjust the fine tuni[...]

67 LNA (Low Noise Amplifier) If the TV is operating in a weak-signal area, sometimes the LNA function can improve the reception (a low-noise preamplifier boosts the incoming signal). 1 Press the MENU button. Press the ▲ or ▼ button to select “Channel”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “LNA”, then pres[...]

[...]

PLASMA DISPLA Y P ANEL Time Setting Setting the Clock .......................................................................70 Setting the Sleep T imer ...............................................................71 Setting the T imers ......................................................................72[...]

Setting the Clock 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. 3 Press the ENTER button to select “Clock”, then press the ▲ or ▼ button to select correct hour . 4 Press the √ button to select “Min[...]

Y ou can set your PDP to automatically tur n off after a preset inter val. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Sleep T imer”, then press the ENTER button.[...]

72 Setting the Timers This PDP can be set to turn on or off automatically at specific times that you choose. Before using the timers, you must set the PDP’ s clock, as described previously . 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “T ime”,[...]

6 Press the √ button to select “Channel”, then press the ▲ or ▼ button to select the channel you want when PDP turns on. 7 Press the √ button to select “V olume”, then press the ▲ or ▼ button to select the volume level you want when PDP turns on. 8 Press the √ button to select “Activation”, then press the ▲ or ▼ button[...]

[...]

Selecting a Menu Language .....................................................76 Digital Noise Reduction ...........................................................77 Selecting the Film Mode ...........................................................78 Using the Color W eakness Enhancement Option .........................79 Preventing Screen Burn-[...]

Selecting a Menu Language 76 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ENTER button to select “Language”. 3 Press the ▲ or ▼ button to select the appropriate language: “English”, “Français” or “Español”. Press the ENTER button. 4 Press the MENU button t[...]

77 Digital Noise Reduction If the broadcast signal received by your TV is weak, you can activate the Digital Noise Reduction feature to help reduce any static and ghosting that may appear on the screen. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select ?[...]

78 Selecting the Film Mode On: Automatically senses and processes film signals from all sources and adjusts the picture for optimum quality . Off: Switches off the Film mode. 1 Press the MENU button. Press the ▲ or ▼ button to select “Picture”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Film Mode”, then press [...]

1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Color W eakness” , then press the ENTER button. 3 Press the ENTER button. Press the ▲ or ▼ button to select “On”, then press the ENTER button. Y ou will also see the items “Red“, “Green?[...]

80 Preventing Screen Burn-in Y ou can prevent image bur n-in on the PDP screen. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Screen Burn Protection” , then press the ENTER button. 3 Press the ENTER button to select “Pixel Shift” , then press[...]

81 5 Press the ▲ or ▼ button to select “All White” or “Signal Pattern”, then press the ENTER button. 6 Press the ▲ or ▼ button to select “On”, then press the ENTER button. • Pressing the ▲ or ▼ button will alternate between “On” and “Off”. 7 Press the MENU button to exit. Pixel Shift All White : Off Signal Pattern [...]

82 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “Miscellaneous”, then press the ENTER button. 3 Press the ▲ or ▼ button to select “Melody”, press the ENTER button. 4 Press the ▲ or ▼ button to select “On” or “Off”, then press [...]

83 Setting the Blue Screen If no signal is being received or the signal is ver y weak, a blue screen automatically replaces the noisy picture background. If you wish to continue viewing the original picture, you must set the “Blue Screen“ mode to “Off“. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press t[...]

84 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. Press the ▲ or ▼ button to select “Caption”, then press the ENTER button. 2 Press the ENTER button to select “Caption”. Press the ▲ or ▼ button to turn closed caption on/off, then press the ENTER button. 3 Press the ▲ or ▼[...]

85 Using the V -Chip The V -Chip feature automatically locks out programs that are deemed inappropriate for children. The user must enter a PIN (personal ID number) before any of the V -Chip restrictions are set up or changed. Note: When the V -chip feature is activated, the PIP and auto channel program features do not function. Setting Up Y our Pe[...]

86 How to Enable/Disable the V -Chip 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”, then press the ENTER button. 2 Press the ▲ or ▼ button to select “V -Chip”, then press the ENTER button. The message “Enter PIN” will appear . Enter your 4 digit PIN number . 3 The “V -Chip” screen will appear . T o enabl[...]

87 How to Set up Restrictions using the “TV Parental Guidelines” First, set up a personal identification number (PIN), and enable the V -Chip. (See previous section.) Parental restrictions can be set up using either of two methods: The TV guidelines or the MP AA rating. 1 Press the MENU button. Press the ▲ or ▼ button to select “Setup”,[...]

88 5 At this point, one of the TV -Ratings is selected. Press the ENTER button. Depending on your existing set up, the symbol will be selected. (Blank = Unblocked, = Blocked) While “ ” is selected, press the ENTER button to block or unblock the categor y . To select a different TV -Rating, press the ▲ or ▼ button and then repeat the process[...]

89 H ow to Set up Restrictions using the MP AA Ratings: G, PG, PG-13, R, NC-17, X, NR The MP AA rating system uses the Motion Picture Association of America (MP AA) system, and its main application is for movies. When the V -Chip lock is on, the TV will automatically block any programs that are coded with objectionable ratings (either MP AA or TV -[...]

90 How to Reset the TV after the V -Chip Blocks a Channel (“Emergency Escape”) If the TV is tuned to a restricted channel, the V -Chip will block it. The screen will go blank and the following message will appear: 1 Press the ENTER button. 2 Enter your PIN number . To resume normal viewing, tune to a different channel using the number buttons. [...]

PLASMA DISPLA Y P ANEL Appendix Tr oubleshooting ............................................................................92 Care and Maintenance ................................................................93 Specifications ..............................................................................94[...]

92 Tr oubleshooting Problem Poor picture. Y our remote control does not operate the PDP . The PDP won’t turn on. There is no screen image. The image is too light or too dark. The image is too large or too small. Before you call a ser vice technician, please scan this list of problems and possible solutions. It may save you time and money . Possib[...]

93 W ith proper care, your PDP will give you many years of service. Please follow these guidelines to get the maximum perfor mance from your PDP . Identifying Problems • Do not put the PDP near extremely hot, cold, humid or dusty places. • Do not put the PDP near appliances that create magnetic fields. • Keep the ventilation openings clear . [...]

94 Specifications Exterior design and product specifications are subject to change without prior notice to improve the perfor mance of this product. HP-P3761 951.5 (W) x 89.9 (D) x 670 (H) mm / 38.6 (W) x 3.5 (D) x 26.4 (H) inches 30.5 Kg / 67 lbs AC120V~, 60Hz 330 W 1024 (H) X 1024 (V) 92 Cm / 37 Inches (16:9) VHF , UHF (75 Ω unbalanced) AV 1 AV[...]

95 Memo[...]

BN68-00724A-00 1-800-SAMSUNG (1-800-726-7864) Samsung Electronics America Service Division 400 V alley Road, Suite 201 Mount Arlington, NJ 07856 www .samsungusa.com Samsung Electronics Canada Inc. Samsung Customer Car e 7037 Financial Drive Mississauga, Ontario L5N 6R3 www .samsung.ca[...]