Samsung LN32D467E1HXZA Bedienungsanleitung

SyncMaster 320TSn-3 LCD Display User Manual The color and the appearance may differ depending on the product, and the specificatio ns are subjec t to change without prior notice to improve the performance.[...]

Safety Instructions Notational Note These safety instructions must be followed to ensure your safety and prevent property dam- age. Make sure to read the instructions carefully and use the product in the correct manner. Warning / Caution Failure to follow directions noted by this symbol could result in bodily harm or damage to the equipment. Note P[...]

Ensure that the power plug is plugged into the power outlet firmly and correctly. • Otherwise, this may result in fire. Do not forcefully bend or pull the power plug and do not place any heavy material on it. • Otherwise, this may result in fire. Do not connect multiple appliances to the same power outlet. • Otherwise, this may cause fire due[...]

DO NOT PLACE CANDLES, MOSQUITO REPELLANT, CIG- ARETTES AND ANY HEATING APPLIANCES NEAR THE PRODUCT. • Otherwise, this may result in fire. Keep heating appliances as far away from the power cord or the product as possible. • Otherwise, this may result in electric shock or fire. Do not install it in a badly ventilated location such as a bookcase [...]

Clean When cleaning the monitor case or the surface of the TFT-LCD screen, wipe with a slightly moistened, soft cloth. Do not spray cleaner directly onto the surface of the product. • Otherwise, this may result in the discoloration and distortion of the structure and the screen surface may peel off. When cleaning the power plug pins or dusting th[...]

Do not place this product in a location exposed to moisture, dust, smoke, water, or in a car. • Otherwise, this may result in electric shock or fire. When you drop the product or the case is broken, turn the power off and disconnect the power cord. Contact a Service Center. • Otherwise, this may result in electric shock or fire. If thunder or l[...]

Set a resolution and frequency appropriate to the product. • Otherwise, your eyesight may be damaged. When using headphones or earphones, do not turn the volume too high. • Having the sound too loud may damage your hearing. To avoid eyestrain, do not sit too close to the product. Take a rest for at least five (5) minutes after using the monitor[...]

When replacing the battery, insert it with the right polarity (+, -). • Otherwise, the battery may become damaged or it may cause fire, personal injury or damage due to leakage of the internal liquid. Use only the specified standardized batteries, and do not use a new battery and a used battery at the same time. • Otherwise, the batteries may b[...]

Do not install the product in a location low enough for children to reach. • Otherwise, it may fall and result in personal injury. • Since the front part of the product is heavy, install the product on a level and stable surface. Do not put any heavy objects on the product. • This may result in personal injury and/or damage to the prod- uct. [...]

Introduction Package Contents Checking the Contents of the Package Note • After unpacking the package, make sure to check the contents of the package. • Store the packaging box in case you need to move the Product later. • If any items are missing, contact your dealer. • Contact a local dealer to purchase optional items. Unpacking LCD Displ[...]

Others Remote Control (BP59-00138B) Batteries (AAA X 2) (Not available in all loca- tions) Sold separately Semi Stand KIT LAN Cable USB Cable RGB to BNC Cable RGB to COMPONENT Ca- ble TV tuner box (US Only) Wall Mount KIT RS232C Cable Note Accessories that can be purchased with the product vary by country. Your LCD Display The color and the appeara[...]

Front MENU button [MENU] Opens the on-screen menu and exits from the menu. Also use to exit the OSD menu or return to the previous menu. Navigate buttons (Up-Down buttons) Moves from one menu item to another vertically or adjusts selected menu values. Adjust buttons (Left-Right buttons) / Volume buttons Moves from one menu item to another horizonta[...]

D.MENU button Opens the on-screen D.MENU. Note The D.MENU button is activated when a TV tuner is connected and oth- erwise, the PIP button is enabled. PIP button Push the PIP button to turn the PIP screen On / Off. Power button [ ] Use this button for turning the LCD Display on and off. Brightness Sensor Automatically detects the surrounding bright[...]

POWER S/W ON [ │ ] / OFF Switches the LCD Display On/Off. POWER The power cord plugs into the LCD Display and the wall outlet. RGB/COMPONENT IN (PC/COMPO- NENT Connection Terminal (Input)) • Connect the [ RGB/COMPONENT IN] port on the monitor to the RGB port on the PC using the D-SUB cable. • Connect the [ RGB/COMPONENT IN] port on the monito[...]

AV/COMPONENT AUDIO IN [R-AUDIO- L] Connect the [ AV/COMPONENT AUDIO IN [R-AUDIO-L]] port on the monitor to the audio output port on the PC or on the external de- vice using an audio cable. AV IN Connect the [ AV IN] terminal of your monitor to the video output terminal of the external device using a VIDEO cable. AUDIO OUT Connect a headphone or an [...]

Using MagicInfo To use MagicInfo with an TSn-3 model, in- stall inside the product a network box speci- fied by Samsung and connect the MagicIn- fo output on the network box to [HDMI IN 2 (MAGICINFO)] on the product. RJ45 MDC (MDC PORT) MDC(Multiple Display Control) Program Port Connect the LAN cable to [ RJ45 MDC] on the product and LAN on the PC.[...]

Keyboard / Mouse, Mass Storage Device Compatible. Kensington Lock slot A Kensington Lock is an anti-theft device that enables users to lock the product so that they can safely use it in public locations. Since the shape and usage of the locking device may differ depending on the model and the man- ufacturer, for more information, refer to the User [...]

Remote Control Note • The performance of the remote control may be affected by a TV or other electronic device operating near the LCD Display , causing a malfunction due to interference with the fre- quency. • A TV tuner box (sold separately) must be connected to use the TV. (US Only) POWER OFF Number Buttons / GUIDE button + VOL - SOURCE D.MEN[...]

Note This button can only be used in TV mode while a TV tuner box (sold separately) is connected. + VOL - Adjusts the audio volume. SOURCE Selects a connected external input source or MagicInfo mode. Press the button to change the input signal SOURCE. Changing the SOURCE is only allowed for external devices that are connected to the LCD Display at [...]

SAP Mono ↔ SAP Mono DUAL- STEREO/MONO, DUAL l / DUAL ll and MONO/NICAM MONO/NICAM STEREO can be operated depending on the broadcasting type by using the DUAL button on the remote control while watching TV. Note Enabled when a TV tuner box is connected. ENTER/PRE-CH This button is used to return to the immediately previous channel. Note Enabled wh[...]

User Installation Guide Note • Be sure to call an installation expert of Samsung Electronics to install the product. • The warranty becomes invalid if the product is installed by someone other than a profes- sional authorized by Samsung Electronics. • A Samsung Electronics service center can provide details. Tilt Angle and Rotation 1 2 1. The[...]

B: Ambient temperature Measuring point <35°C • When installing the product onto a vertical wall, be sure there is a 40 mm space or more behind the product for ventilation, as shown above, and maintain the ambient temperature at 35°C or lower. Note A Samsung Electronics service center can provide details. 2. Embedded Mount guide <Side view[...]

Note A Samsung Electronics service center can provide details. Mechanical Layout Installation VESA Bracket • When installing VESA, make sure to comply with the international VESA standards. • Purchasing VESA Bracket and Installation Information : Please contact your nearest SAMSUNG Distributor to place an order. After your order is placed, inst[...]

Notice For securing the bracket on a wall, use only machine screws of 6 mm diameter and 8 to 12 mm length. Accessories (sold separately) • Dimension with other accessories Wall Bracket Installation • Contact a technician for installing the wall bracket. • SAMSUNG Electronics is not responsible for any damages to the product or harm to custome[...]

To mount the product on the wall bracket The shape of the product may vary depending on the model. (The assemblies of the plastic hanger and the screw are the same) 1. Remove the 4 screws on the back of the product. 2. Insert the screw B into the plastic hanger. Notice • Mount the product on the wall bracket and make sure it is properly fixed to [...]

A - LCD Display B - Wall Bracket C - Wall Wall Bracket Angle Adjustment Adjust the bracket angle to -2° before installing it on the wall. 1. Fix the product to the wall bracket. 2. Hold the product at the top in the center and pull it forward (direction of the arrow) to adjust the angle. Note You can adjust the bracket angle between -2° and 15°.[...]

Remote Control (RS232C) Cable connections interface RS232C(9 pin) pin TxD(No.2) RxD(No.3) GND(No.5) Bits rate 9600 bps Data Bits 8 bit Parity None Stop Bits 1 bit Flow control None Maximum length 15 m (only shielded type) • Pin assignment Pin Signal 1 Data Carrier Detect 2 Received Data 3 Transmitted Data 4 Data Terminal Ready 5 Signal Ground 6 D[...]

Tx Gnd 3 5 <--------- ---------- 2 5 Tx Gnd • Connecting method Control codes • Get control Header command ID DATA Length CheckSum 0xAA command type 0 • Set control Header command ID DATA Length DATA CheckSum 0xAA command type 1 Value • commanding words No. command type command Value range 1 Power control 0x11 0~1 2 Volume control 0x12 0[...]

- Every communication will be made in hexadecimals and Checksum is the sum of all remainings. If it exceeds two digits,for example, it is 11+FF+01+01=112, discard the number in the first digit like below. example)PowerOn&ID=0 Header command ID DATA Length DATA 1 CheckSum 0xAA 0x11 1 Power Header command ID DATA Length DATA 1 12 0xAA 0x11 1 1 If[...]

0xAA 0xFF 3 ‘N’ 0x11 ERR ERR : Error code that shows what occurred error is • Volume Control • Function Personal Computer changes volume of TV / Monitor. • Get Volume Status Header command ID DATA Length CheckSum 0xAA 0x12 0 • Set Volume Header command ID DATA Length DATA CheckSum 0xAA 0x12 1 Volume Volume : Volume value code to be set [...]

• Set Input Source Header command ID DATA Length DATA CheckSum 0xAA 0x14 1 Input Source Input Source : Input Source code to be set on TV / Monitor 0x14 PC 0x1E BNC 0x18 DVI 0x0C AV 0x04 S-Video 0x08 Component 0x20 MagicInfo 0x1F DVI_VIDEO 0x30 RF(TV) 0x40 DTV 0x21 HDMI1 0x22 HDMI1_PC 0x23 HDMI2 0x24 HDMI2_PC 0x25 DisplayPort Caution DVI_VIDEO, HD[...]

• Screen Mode Control • Function Personal Computer changes "Screen Mode" of TV/Monitor. Cannot be controlled when Video Wall is on. Caution Only works with models include TV. • Get Screen Mode Status Header command ID DATA Length CheckSum 0xAA 0x18 0 • Set Picture Size Header command ID DATA Length DATA CheckSum 0xAA 0x18 1 Screen[...]

Personal Computer recognizes the screen size of TV / Monitor. • Get Screen Size Status Header command ID DATA Length CheckSum 0xAA 0x19 0 • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x19 Screen Size Screen Size : Screen Size of TV / Monitor (Range : 0 ~ 255, Unit : Inch) • Nak Header com- mand ID DAT[...]

Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x3C PIP PIP : Same as above • Nak Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘N’ 0x3C ERR ERR : Error code that shows what occurred error is • Auto Adjustment Control (PC, BNC Only) • Function Personal Computer controls PC syste[...]

• Function Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is ON. Only works with TV / Monitor where Video Wall is on. Does not operate in MagicInfo • Get Video Wall Mode Header command ID DATA Length CheckSum 0xAA 0x5C 0 • Set Video Wall Mode Header command ID DATA Length DATA CheckSum 0xAA 0x5C 1 Video Wall Mode V[...]

• Get Safety Lock Status Header command ID DATA Length CheckSum 0xAA 0x5D 0 • Set Safety Lock Enable / Disable Header command ID DATA Length DATA CheckSum 0xAA 0x5D 1 Safety Lock Safety Lock : Lock code to be set on TV / Monitor 1 : ON 0 : OFF • Ack Header com- mand ID DATA Length Ack/Nak r-CMD Val1 Check Sum 0xAA 0xFF 3 ‘A’ 0x5D Safety L[...]

Connections Connecting a Computer There are several ways to connect the computer to the monitor. Choose one from the following options. Using the D-sub (Analog) connector on the video card. • Connect the D-sub to the 15-pin, [ RGB/COMPONENT IN] port on the back of your LCD Display and the 15 pin D-sub Port on the computer. Using the DVI (Digital)[...]

• Connect the [ HDMI IN 1] / [ HDMI IN 2 (MAGICINFO)] port on the LCD Display to the HDMI port on the PC using the HDMI cable. Note Select HDMI2 or HDMI1 as an input source when connected to the PC via an HDMI cable. To obtain normal picture and audio from the PC, HDMI2 or HDMI1 must be selected before PC is selected in Edit Name . To enable audi[...]

Connecting AV Devices 1. Connect an audio cable to [ AV/COMPONENT AUDIO IN [R-AUDIO-L]] on the product and the audio port on an external device such as a VCR or DVD player. 2. Connect a video cable to [ AV IN] on the product and the video output port on the external device. 3. Then, start the DVD, VCR or Camcorders with a DVD disc or tape inserted.[...]

2. Connect a set of audio cables between the AUDIO OUTPUT jacks on the camcorder and the [ AV /COMPONENT AUDIO IN [R-AUDIO-L]] on the LCD Display . 3. Press SOURCE on the product or remote control and select " AV ". 4. Then, start the Camcorders with a tape inserted. Note The audio-video cables shown here are usually included with a Camco[...]

Connecting Using a DVI to HDMI Cable Connect a DVI-HDMI cable to [ HDMI IN 2 (MAGICINFO)] or [ HDMI IN 1] and the DVI output port on the digital device. Connect the red and white jacks of an RCA to stereo (for PC) cable to the same colored audio output terminals of the digital output device, and con- nect the opposite jack to the [ RGB/DVI/DP/HDMI [...]

Note • Press SOURCE on the product or remote control and select " Component ". • Then, start the DVD Player with a DVD disc inserted. • A RGB to component cable is optional. • For an explanation of Component video, consult your DVD manual. Connecting a DTV Set Top (Cable/Satellite) Box Connect a RGB to Component cable between the [...]

Connecting to an Audio System 1. Connect a set of audio cables between the AUX L, R jacks on the AUDIO SYSTEM and [ AUDIO OUT] on LCD Display. Connecting to MAGICINFO OUT Connect the [MAGICINFO OUT] terminal and the [HDMI IN 2 (MAGICINFO)] terminal on the product using the DP to HDMI cable. Connections[...]

Connecting a LAN Cable Connect the LAN cable between the [LAN] port on the product and the [LAN] port on your PC. Connecting a USB devices You can connect USB devices such as a mouse or keyboard. Connections[...]

Using the Software Monitor Driver Note When prompted by the operating system for the monitor driver, insert the CD- ROM included with this monitor. Driver installation is slightly different from one operating system to another. Follow the directions appropriate for the oper- ating system you have. Prepare a blank disk and download the driver Progra[...]

Note This monitor driver is certified by Microsoft, and installing it will not damage your system. The certified driver will be posted on Samsung Monitor homepage. http://www.samsung.com/ Installing the Monitor Driver (Manual) Microsoft ® Windows Vista™‚ Operating System 1. Insert your Manual CD into your CD-ROM drive. 2. Click ( Start) and &q[...]

If the message "Windows needs..." is displayed, as shown in the figure below, click "Continue". Note This monitor driver is under certifying MS logo, and this installation will not damage your system. The certified driver will be posted on Samsung Monitor homepage. 6. Click "Update Driver..." in the "Driver" [...]

9. Select the model that matches your monitor from the list of monitor models on the screen, and click "Next". 10. Click "Close" → "Close" → "OK" → "OK" on the following screens displayed in sequence. Microsoft ® Windows ® XP Operating System Using the Software[...]

1. Insert CD into the CD-ROM drive. 2. Click "Start" → "Control Panel", then click the "Appearance and Themes" icon. 3. Click "Display" icon and choose the "Settings" tab then click "Advanced...". 4. Click the "Properties" button on the "Monitor" tab and select "[...]

7. Click the "Browse" button then choose A:(D:Driver) and choose your monitor model in the model list and click the "Next" button. 8. If you can see the following message window, then click the "Continue Anyway" button. Then click "OK" button. Note This monitor driver is certified by Microsoft, and this inst[...]

10. Monitor driver installation is completed. Microsoft ® Windows ® 2000 Operating System When you can see "Digital Signature Not Found" on your monitor, follow these steps. 1. Choose "OK" button on the "Insert disk" window. 2. Click the "Browse" button on the "File Needed" window. 3. Choose A:(D:[...]

If you can see the "Digital Signature Not Found" window, then click the "Yes" button. Then click the "Finish" button and the "Close" button. Microsoft ® Windows ® Millennium Operating System 1. Click "Start", "Setting", "Control Panel". 2. Double click the "Display" i[...]

5. Set a Keyboard for your computer. 6. The next screen is for setting your monitor. 7. First of all, set a horizontal frequency for your monitor. (You can enter the frequency directly.) 8. Set a vertical frequency for your monitor. (You can enter the frequency directly.) 9. Enter the model name of your monitor. This information will not affect the[...]

MDC Program Installation/Uninstallation Installation 1 Insert the installation CD into the CD-ROM drive. 2 Click the MDC Unified installation program. If a software installation window is not displayed on the main screen, install with the "MDC Unifie d" execution file in the MDC folder on the CD. 3 Click "Next" in th e displayed[...]

Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. What is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC .[...]

Using MDC via Ethernet Enter the IP for th e primary display device and connect the device to th e PC. One display device can connect to another using an RS-232C serial cable.[...]

Connection Management Connection managemen t includes th e Connection list and Connection list modif ication options . Connection list – Connection list sho ws the details of the connections such as connection setting (IP/ COM, Port No, MAC, and Connec tion Type ), conn ection statu s, Set ID Range , and detected devices. Each connection can cont[...]

Auto Set ID Auto Set ID feature assigns a Set ID for all the LFDs conne cted in daisy-chain of a selected connection. There can be a ma ximum of 100 LFDs in a connection. The Se t ID is assign ed sequentially in th e daisy- chain runnin g from 1 to 99, and then finally to Set ID 0. Cloning Using the Cloning feature , you can copy the settin g of on[...]

Command Retry This feature is used to sp ecify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply from an LFD. The ret ry count value ca n be set using th e MDC options window. The retry count value must be betwe en 1-10. The defau lt value is 1.[...]

Getting Started with MDC 1 To start the pr ogram, clic k Start Programs Samsung MDC Unified . 2 Click Add to add a display device. z If the connection is established via RS232C, go to Serial and specify the COM Port .[...]

z If the connection is established via Ethernet , enter the IP that wa s entered for the display device.[...]

Main Screen Layout Menu Bar Change the status of a display device or the pr operties of the program. Device Category View a list of connected display devices or device groups. Schedule Category View a list of schedules for display devices. Set List Select the display device you want to adjust. Modify the Set List Add, edit, regroup or delete sets. [...]

Menus You can power on or off a selec ted device or change the input source or volume of the device. Choose display devices from the list of sets, and select the Home tab. Home Select an item and change the corresponding setting. Power z On : Power on a selected display. z Off : Power off a se lected dis Input z Input Source : Ch ange the input sou[...]

 This menu show s a list of display devices wh ich hav e following errors - fan e rror, temperature error, brightness sensor error, o r lamp error. Select a display device from the list. The Repair button will be enabled . Click the refresh button to refresh t he error status of the display de v ice. The recovered di splay devic e will disappea [...]

Screen Adjustment The screen sett ings (contra st, brightness, et c.) can be adjusted. Choose display devices from the list of sets, and select the Picture tab. Custom Select an item and change the corresponding screen setting. z Color and Tint are not available if the input source is PC . z Red , Green , Blue and PC Screen Adjustment are not avail[...]

Options Dynamic Contrast Adjust the Dynamic Contrast for the selected display device. Gamma Control Change the gamma valu e for the selecte d display. Auto Motion Plus This option is used to v iew dynamic ima ges. z Off : Disable the Auto Motion Plus function. z Clear : Set the level of Auto Motion Plus to clear. This mode is suit able to display v[...]

Size Picture Size Adjust the screen size for the selected display device. The Detail item will be disabled if Picture Size is set to a mode that does not support detailed configur ation. The -/+ buttons c an be used to adju st Zoom . The screen can be relocated using the up/down/left/right butt ons. Detail You can view details of th e selected scre[...]

Sound Adjustment You can change th e sound settings. Choose display devices from the list of sets, and select the Sound tab. The Bass or Treble item will be disabled if the item is not supported by the selected set. Bass Adjust the bass for the selected display. Treble Adjust the treble for th e selected display. Balance (L/R) Adjust the volume of [...]

System Setup Choose display devices from the list of sets, and select the System tab. Video Wall The Video Wall function can be used to display part of a whole pic ture or repeat the same picture on each of connected multiple display devices. Video Wall is enabled only when devices are in the group. Video Wall Enable or disable Video Wall . Format [...]

H Select the number of horizontal display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. V Select the number of ve rtical display devices. A maximum of 15 displays can be arranged in a row. A maximum of 6 can be assigned to V if 15 is assigned to H. Screen Position View the la[...]

PIP Basic information required to adjust PIP will appear in the menu screen. z PIP will be disabled when Video Wall is ON . z Note that Picture Size is disabled when PIP is ON . PIP Size View the PIP Size of the current display. PIP Source Select a PIP input source. Sound Select Select and enable the sound from either the primary screen or secondar[...]

General User Auto Color Automatically adjust the scre en colors. Available only in PC mode. Auto Power Set the product to aut omatically power on. Standby Control Set the standby mode to activate if an input source is not detected. Fan & Temperature Configure the settings required t o detect the fan sp eed and in ternal temperatu re for the pro[...]

Security Safety Lock Lock the on-sc reen menus. To unlock the menus, set Safety Lock to Off . Button Lock Lock the buttons on the display device. To unlock the buttons, set Button Lock to Off . OSD Display Source OSD Select whether to display a message when the Source is changed. Not Optimum Mode OSD Select whether to display a message when a non-c[...]

Time Clock Set Change the current time on the selected displa y device acc ording to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer z On Time : Set the time t o power on the selected displa y device. z Off Time : Set the time to power off the selecte d display device. z Volume : Specify th e[...]

 Once : Activate the timer only one time.  EveryDay : Activate the tim er every day.  Mon~Fri : Activate the timer from Monday throug h Friday.  Mon~Sat : Activate the timer on Saturdays and Sundays.  Manual : Customize days of the week. The checkboxes to select days of the week below Repeat are enabled only if Manual is selected. Ho[...]

Screen Burn Protection Pixel Shift Move the screen slightly at specified time inter vals to prevent screen burn-in. Screen Saver This function pre vents screen burn-in w hen the scre en of the s elected display dev ice is left idle for a n extended period o f time. z Interval : Set the interval to activa te the Screen Saver . z Mode : The Time sett[...]

The Safety Screen function can be used to prevent scre en bu rn-in when a station ary image displays on the screen of a display de vice for an ext ended period of time. Lamp Control Lamp Control is used to adjust the bac klight to redu ce power consumpt ion. Automatically ad just the backlight of the selected display device at a specified time. If [...]

Reset Reset Picture Reset the sc reen settings. Reset Sound Reset the sound settings. Reset System Reset the sys tem settings . Reset All Reset the screen, sound and system settings at the same time. Edit Column Select the items you want to display in the list of sets. Information View the program information. 2 3 4[...]

Other Functions Resizing a Window Place the mouse pointer on a corn er of the program window. An arro w will appear. Move the arrow to customize the size of the program window.[...]

Group Management Creating Groups Create groups and mana ge the list of sets on a group basis. Duplicate group names cannot be used. 1 Right-click and select Group>Edit in the display device list section on the left side of the program window. 2 In the Edit Group window displayed, click Add on the sub level or Add on the same leve l . z Add on th[...]

The Add on the same level button is enabled only if at least one group is created. 3 Enter the group name. Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delete . 3 Click Yes . The group will be deleted. Renaming Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed,[...]

Schedule Management Creating Schedules Create and register a sc hedule on a grou p basis. 1 Click All Schedule List in the schedule sec tion on the le ft side of the program window. The Add button will be enabled in the middle. 2 Click the Add button. The Add Schedule window will appear.[...]

3 Click Add belo w the Device Group item, and select the group you want to add a schedule to. 4 Select Date&Time/Action and click OK . The schedule will be added and a list of schedules will appear in the set list window. z Device Gr oup : Select a group. z Date&Time  Instant Execution : Run the schedule immediately.  Timer Set the da[...]

Troubleshooting Guide This program may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted from nearby electronic devices. Issue Solution The display you wan t to control does not appear on th e system information chart. 1. Check the connection of the RS232C cable (check th at the cable i[...]

How display properties are shown when multiple displays are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected disp lay are displayed. 3 When two displays are selected (e.g. in sequence of ID 1 and ID 3): The settings for ID 1 are displayed before the settings for ID 3. 4 Wh[...]

Adjusting the LCD Display Input Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note A TV tuner box (sold separately) must be connected to use the TV. (US Only) Using MagicInfo To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo o[...]

9. TV - Enabled if a TV tuner box is connected. Note The [RGB/COMPONENT IN] port is compatible with RGB (PC) and Component signals. However, the picture may display abnormally if the connected external input signal is different from the selected video signal. PIP Note The PIP function is not available when Video Wall is On . When external AV device[...]

• A TV tuner box (sold separately) must be connected to use the TV. (US Only) • PC : DVI / AV / HDMI1 / HDMI2 / DisplayPort • DVI : PC • AV : PC • HDMI : PC • DisplayPort : PC Size Changes the Size of the PIP window. Position Changes the Position of the PIP window. Transparency Adjusts the Transparency of PIP windows. • High • Mediu[...]

• Opaque Edit Name Name the input device connected to the input jacks to make your input source selection easier. VCR / DVD / Cable STB / HD STB / Satellite STB / AV Receiver / DVD Receiver / Game / Camcorder / DVD Combo / DHR / PC / DVI PC / DVI Devices Note • The displayed devices differ depending on the external input mode. • When connecti[...]

Source AutoSwitch When the Source AutoSwitch is On , the display video source will automatically be searched for active video. The Primary Source selection will be activated, if the current video source is not recognized. Secondary source selection will become active, if no primary video source is available. If the primary or secondary source is no[...]

Specify Primary Source for the automatic input source. Secondary Source Specify Secondary Source for the automatic input source. Picture [ PC / DVI / DisplayPort / MagicInfo Mode] • If connected to a PC, set Edit Name to DVI PC , and enjoy video or audio content saved on the PC. • If connected to an AV device, set Edit Name to DVI Device , and [...]

Note Not available when Dynamic Contrast is set to On . 1. Information Recommended for communicating exact information (e.g. public information). 2. Advertisement Recommended for displaying advertisements (e.g. videos or indoor or outdoor ads). 3. Custom Custom By using the on-screen menus, the contrast and brightness can be changed to your persona[...]

• Mode 1 Sets the picture brighter than Natural . • Mode 2 Sets the picture darker than Mode 1 . • Mode 3 Increases the contrast between dark and bright colors. Color Tone Note Not available when Dynamic Contrast is set to On . The Color tones can be changed. 1. Off 2. Cool 3. Normal 4. Warm 5. Custom Note If you set the Color Tone to Cool , [...]

3. Blue Color Temp. Color Temp. is a measure of the 'warmth' of the image Colors. Note This function is enabled when Mode is set to Custom , and Dynamic Contrast and Color Tone are Off . Image Lock Image Lock is used to fine-tune and get the best image by removing noise that creates unstable images with jitters and shakiness. If satisfact[...]

Auto Adjustment The values of Fine , Coarse , Position are adjusted automatically. By changing the resolution in the control panel, the auto function is performed. Note Available in PC mode only. Signal Balance This is used to make up for the weak RGB signal transmitted by a long signal cable. Note • Not available when Dynamic Contrast is set to [...]

5. G-Offset 6. B-Offset Size The Size can be switched. 1. 16:9 2. 4:3 HDMI Black Level When a DVD or set-top box is connected to your product via HDMI or DVI port, it may cause a degradation in the screen quality, such as an increase in the black level, a low contrast, or discoloration, etc., depending on the external device connected. In this case[...]

1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts the Sharpness of the PIP window on the screen. 4. Color Adjusts the Color of the PIP window on the screen. Note PIP input only operates in AV , HDMI , or Component mode. 5. Tint Adds a natural [...]

Note This function is disabled when PIP or Energy Saving is On . Lamp Control Adjusts the inverter lamp in order to reduce energy consumption. Note Not available when Dynamic Contrast is set to On . Brightness Sensor Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted. 1. Off 2. On Pict[...]

Using MagicInfo To use MagicInfo with an TSn-3 model, install inside the product a network box specified by Samsung and connect the MagicInfo output on the network box to [ HDMI IN 2 (MAGICIN- FO)] on the product. Mode The LCD Display has four automatic picture settings (" Dynamic ", " Standard ", " Movie " and " [...]

Color Adjusts the picture Color. Tint Adds a natural tone to the display. Note The Tint slider is only displayed when input source is HDMI , Component or AV . Color Tone The Color tones can be changed. The individual Color components are also user adjustable. Note Not available when Dynamic Contrast is set to On . 1. Off 2. Cool2 3. Cool1 4. Normal[...]

Note This function is enabled when Mode is set to Custom , and Dynamic Contrast and Color Tone are Off . Size The Size can be switched. PC mode(PC, HDMI[PC Timing ]): 16:9 - 4:3 Video mode ( HDMI [Video Timing], AV or Component ): 16:9 - Zoom1 - Zoom2 - 4:3 - Screen Fit - Custom 1. 16:9 - Sets the picture to 16:9 wide mode. 2. Zoom 1 - Magnifies th[...]

Turns the Digital Noise Reduction feature Off / On . The Digital Noise Reduction feature allows you to enjoy clearer and crisper images. 1. Off 2. On Note Digital NR function is not available for all resolutions. HDMI Black Level When a DVD or set-top box is connected to your product via HDMI or DVI port, it may cause a degradation in the screen qu[...]

PIP Picture Adjusts the PIP Screen Settings. Note Available Modes: PIP On 1. Contrast Adjusts the Contrast of the PIP window on the screen. 2. Brightness Adjusts the Brightness of the PIP window on the screen. 3. Sharpness Adjusts the Sharpness of the PIP window on the screen. Dynamic Contrast Dynamic Contrast automatically detects the distribution[...]

Brightness Sensor Brightness Sensor detects the ambient light intensity so that the picture brightness can automatically be adjusted. 1. Off 2. On Picture Reset Reset the screen settings. Sound Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note A TV tuner box (sold separately) must be connected to use[...]

The LCD Display has a built-in high fidelity stereo amplifier. 1. Standard Selects Standard for the standard factory settings. 2. Music Selects Music when watching music videos or concerts. 3. Movie Selects Movie when viewing movies. 4. Speech Selects Speech when watching a show that is mostly dialog (i.e., news). 5. Custom Selects Custom if you wa[...]

Reduces the difference in volume control between broadcasters. 1. Off 2. On SRS TS XT SRS TS XT is a patented SRS technology that solves the problem of playing 5.1 multichannel content over two speakers. TruSurround XT delivers a compelling, virtual surround sound experience through any two-speaker playback system, including internal television spe[...]

When you use the product with it connecting to a Home Theater, turn the internal speakers off so you can listen to sound from the Home Theater's (external) speakers. 1. Internal Sound is outputted both from the Internal speaker and the External speakers, but the volume control is only available from the Internal speaker. 2. External When sound[...]

Note The language chosen affects only the language of the OSD. It has no effect on any software running on the computer. Time Selects from one of 4 time settings, Clock Set , Sleep Timer , Timer , and Holiday Manage- ment . Clock Set Current Time Setting. Sleep Timer Turns the LCD Display off automatically at certain times. 1. Off 2. 30 3. 60 4. 90[...]

Timer1 / Timer2 / Timer3 You can set the LCD display to automatically turn on or off at a specified time. Note • Only enabled when the clock is set using the Clock Set menu. • The Manual option allows you to select a day of the week. • Holiday : When choose Apply , timer is not available on holiday; when choose Don’t apply , timer is availa[...]

You can delete all the registered holidays. Menu Transparency Change the transparency of the background of the OSD. 1. High 2. Medium 3. Low 4. Opaque Safety Lock Change PIN The password can be changed. The preset password for the LCD Display is "0000". Note If you forgot your password, press the remote buttons INFO + EXIT + MUTE to reset[...]

Lock This is the function that locks the OSD in order to keep the current settings or to prevent others from adjusting the settings. Energy Saving This feature adjusts the power consumption of the unit in order to save energy. 1. Off 2. On Video Wall A Video Wall is a set of video screens connected together, so that each screen shows a part of the [...]

Format The Format can be selected to see a divided screen. • Full Provides a full screen without any margins. • Natural Displays a natural image with the original aspect ratio intact. Horizontal Sets how many parts the screen should be divided horizontally. Fifteen adjustment levels: 1~15. Note If Vertical is set to 15 , the maximum value for H[...]

Screen Position The screen can be divided into several images. A number of screens can be selected with a different layout when dividing. • Select a mode in Screen Position . • Select a display in Display Selection. • The selection will be set up by pressing a number in the selected mode. • The screen can be split into a maximum of 100 sub-[...]

Horizontal Sets how many pixels the screen moves horizontally. Five adjustment levels: 0, 1, 2, 3, and 4. Vertical Sets how many pixels the screen moves vertically. Five adjustment levels: 0, 1, 2, 3, and 4. Time Set the time interval for performing the horizontal or vertical movement, respectively. Timer Timer You can set the timer for Screen Burn[...]

If you start the operation to erase any residual image, the operation will be performed for the set period of time and then automatically finish. • Off • On Mode You can change the Safety Screen Type. • Bar • Eraser • Pixel Period Use this function to set the execution period for each mode set in the timer. Time Within the set period of t[...]

Bar This function prevents after-images on the screen by moving long black and white vertical lines. Eraser This function prevents after-images on the screen by moving a rectangular pattern. Pixel This function prevents after-images by moving many pixels on the screen. Side Gray Select the brightness of the grey for the screen background. • OFF ?[...]

• Dark Resolution Select When the picture is not displayed properly on the screen when setting the graphics card resolution of the computer to 1024 x 768 @ 60Hz , 1280 x 768 @ 60Hz , 1360 x 768@ 60Hz or 1366 x 768 @ 60Hz , by using this function(Resolution Select), you can have the picture displayed on the screen in the specified resolution. Note[...]

OSD Rotation OSD Rotate 1. Landscape 2. Portrait Advanced Settings Configures the settings more elaborately. Temperature Configures the setting for the Temperature function, which detects the internal temperature for the product's protection. Note For MagicInfo connections, the Temperature menu changes to Fan & Temperature . The Fan Contro[...]

• Manual Fan Speed Setting Sets the fan speed within a range of 0 and 100 . Note Enabled when Fan Control is set to Manual . Temperature Control Detects the product's internal temperature and specifies the desired temperature. The product is set to 77°C by default. Note • The picture will be dimmed if the temperature exceeds the specified[...]

Auto Power Enables or disables Auto Power for the product. • Off • On Note When Auto Power is On , the product will power on automatically as soon as it is connected to power. Button Lock Locks or unlocks the monitor control buttons on the product. • Off • On User Auto Color 1. Auto Color Automatically adjusts the Colors. 2. Reset Resets th[...]

Note Enabled only in PC mode. Standby Control Sets the standby mode, which will be activated when no input signal is detected. • Off A message will read No Signal if no input signal is detected. • On Power-saving mode will be activated if no input signal is detected. • Auto When no input signal is detected, - Power-saving mode will be activat[...]

Source OSD • Off • On Not Optimum Mode OSD • Off • On No Signal OSD • Off • On MDC OSD • Off Adjusting the LCD Display[...]

• On Software Upgrade Performs a software upgrade. 1. Connect the product to a computer via a digital signal such as DVI or HDMI . Click the BMP image file converted from an SW code. The image below will appear on the screen of the product. 2. While a BMP image onto which the software code has been converted is displayed on the screen, select Sof[...]

Setup Reset Reset all the values for a setting. Reset All Reset all the settings for the display. Multi Control Available Modes • PC / DVI / DisplayPort • AV • Component • HDMI • MagicInfo • TV Note A TV tuner box (sold separately) must be connected to use the TV. (US Only) Using MagicInfo To use MagicInfo with an TSn-3 model, install i[...]

• ID Input Use to select the transmitter functions of the individual SET. Only a SET where the ID corresponds to the transmitter setting becomes activated. • MDC Connection Selects a port to receive the MDC inputs from. • RS232C MDC - Communicates with the MDC via a RS232C MDC cable. • RJ45 MDC - Communicates with the MDC via an RJ45 MDC ca[...]

• The preset password for the LCD Display is "000000". • The server Program's Power-On option works only if the LCD Display's power is com- pletely shut off. Please make sure not to use the Power-On option when the LCD Display is in the process of shutting down since this may cause system errors on the LCD Display. • When [...]

In step 2 of MagicInfo Setup Wizard, you don’t have to go to Network Setting on the desktop to make your settings for TCP/IP. You just do that at step 2 of MagicInfo installation. 3. Select Language - step 3 When using multiple languages, you can choose and set a specific language among them. 4. Select Screen Type - step 4 Adjusting the LCD Displ[...]

You can select which rotation type will be applied to your device. 5. Setup Information Shows the settings that have been selected by the user. Note If the MagicInfo icon is not displayed on the notification area, double click the MagicInfo icon on the window desktop. The icon will appear. Adjusting the LCD Display[...]

Troubleshooting Self-Test Feature Check Note Check the following items yourself before calling for assistance. Contact a Service Center for problems that you cannot solve by yourself. Self-Test Feature Check 1. Turn off both your computer and the LCD Display. 2. Unplug the video cable from the back of the computer. 3. Turn on the LCD Display. The f[...]

• Do not use benzene, thinner or other flammable sub- stances. 2) Maintaining the Flat Panel Display Screen. Clean with a soft cloth (cotton flannel). • Never use acetone, benzene or thinner. ( They may cause flaws or deformation of the screen surface.) • The user is responsible for any damage caused by using these substances. Symptoms and re[...]

A: Check if the signal cable between the computer and the LCD Display is securely con- nected. (Refer to Connecting a Computer) Problems related to the Screen Note Problems related to the LCD Display screen and their solutions are listed. Q: The screen is blank and the power indicator is off. A: Ensure that the power cord is firmly connected and th[...]

Q: The screen Color is inconsistent. A: Adjust the Color Control option in the OSD adjustment menu. Q: The Color image is distorted by dark shadows. A: Adjust the Color Control option in the OSD adjustment menu. Q: The Color white is poor. A: Adjust the Color Control option in the OSD adjustment menu. Q: The Power Indicator blinks. A: The LCD Displ[...]

A: Check if a special fluorescent or neon lamp is on in the vicinity. Q & A Q: How can I change the frequency? A: The frequency can be changed by reconfiguring the video card. Note That video card support can vary, depending on the version of the driver used. (Refer to the computer or the video card manual for details.) Q: How can I adjust the [...]

Specifications General General Model Name 320TSn-3 LCD Panel Size 31.5 inch / 80cm Display Area 697.68 mm(H) x 392.25 mm(V) Synchronization Horizontal 30~81 kHz Vertical 56~85 Hz Display Color 16.7M (true) Resolution Optimum resolution 1366 x 768 @ 60Hz Maximum resolution 1920 x 1080 @ 60Hz Maximum Pixel Clock 148.5MHz (Analog, Digital) Power Suppl[...]

Environmental considerations Humidity : 10% ~ 80%, non-condensing Storage Operating Temperature : -4°F ~ 113°F (-20°C ~ 45°C) Humidity : 5% ~ 95%, non-condensing Plug and Play Capability This LCD Display can be installed on any Plug & Play compatible system. The interaction of the LCD Display and the computer systems will provide the best o[...]

State Normal Op- eration Power sav- ing mode Power off Power off ( Power Swich) (Typical) (603.57 BTU/h) (17.05 BTU/ h) (17.05 BTU/ h) (0 BTU/h) Note • The actual power consumption may be different from the indicated power consumption above if the system conditions or settings are changed. • To stop any power consumption, turn off the switch or[...]

Display Mode Horizontal Frequency (kHz) Vertical Fre- quency (Hz) Pixel Clock (MHz) Sync Polarity (H/V) VESA,1600 x 1200 75.000 60.000 162.000 +/+ VESA,1920 x 1080 67.500 60.000 148.500 +/+ Horizontal Frequency The time to scan one line connecting the right edge to the left edge of the screen horizontally is called the Horizontal Cycle and the inve[...]

Information For a Better Display Adjust the computer resolution and screen injection rate (refresh rate) on the computer as described below to enjoy the best picture quality. You can have an uneven picture quality on screen if the best picture quality is not provided for TFT- LCD. • Resolution: 1366 x 768 • Vertical frequency (refresh rate): 60[...]

Power Off, Screen Saver, or Power Save Mode • Turn the power off for 2 hours after 12 hours in use • Set the Monitor to power off with the PC Display Properties Power Scheme. • Use a Screen saver if possible - Screen saver in one Color or a moving image is recommended. • The Image Retention Free function applied to the product is recommende[...]

Change the characters Color periodically • Use Bright Colors with little difference in luminance. - Cycle : Change the characters Color and background Color every 30 minutes • Every 30 minutes, change the characters with movement. • Have the images and logo cycle periodically. - Cycle: Display moving image together with Logo for 60 seconds af[...]

• Apply the Screen Erasing function - Symptom: 2 Vertical blocks move while erasing the display Information[...]

Appendix Contact SAMSUNG WORLDWIDE Note If you have any questions or comments relating to Samsung products, please contact the SAMSUNG customer care Center. North America U.S.A 1-800-SAMSUNG (726-7864) http://www.samsung.com CANADA 1-800-SAMSUNG (726-7864) http://www.samsung.com/ca http://www.samsung.com/ ca_fr (French) MEXICO 01-800-SAMSUNG (726-7[...]

Europe http://www.samsung.com/ be_fr (French) BOSNIA 05 133 1999 http://www.samsung.com BULGARIA 07001 33 11 http://www.samsung.com CROATIA 062 SAMSUNG (062 726 7864) http://www.samsung.com CZECH 800 - SAMSUNG (800-726786) http://www.samsung.com DENMARK 70 70 19 70 http://www.samsung.com FINLAND 030 - 6227 515 http://www.samsung.com FRANCE 01 48 63[...]

Europe SWITZERLAND 0848 - SAMSUNG (7267864, CHF 0.08/min) http://www.samsung.com/ch http://www.samsung.com/ ch_fr/(French) U.K 0330 SAMSUNG (7267864) http://www.samsung.com EIRE 0818 717100 http://www.samsung.com LITHUANIA 8-800-77777 http://www.samsung.com LATVIA 8000-7267 http://www.samsung.com ESTONIA 800-7267 http://www.samsung.com TURKEY 444 7[...]

Asia Pacific JAPAN 0120-327-527 http://www.samsung.com MALAYSIA 1800-88-9999 http://www.samsung.com PHILIPPINES 1-800-10-SAMSUNG (726-7864) for PLDT 1-800-3-SAMSUNG (726-7864) for Digitel 1-800-8-SAMSUNG (726-7864) for Globe 02-5805777 http://www.samsung.com SINGAPORE 1800-SAMSUNG (726-7864) http://www.samsung.com THAILAND 1800-29-3232 02-689-3232 [...]

tance between two dots of the same Color is called the 'Dot Pitch'. Unit: mm Vertical Frequency The screen must be redrawn several times per second in order to create and display an image for the user. The fre- quency of this repetition per second is called the Vertical Frequency or Refresh Rate. Unit: Hz Example: If the same light repeat[...]

Correct Disposal Correct Disposal of This Product (Waste Electrical & Electronic Equipment) ( Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger, headset, USB cable) should n[...]

Authority Information in this document is subject to change without notice. © 2011 Samsung Electronics Co., Ltd. All rights reserved. Reproduction in any manner whatsoever without the written permission of Samsung Elec- tronics Co., Ltd. is strictly forbidden. Samsung Electronics Co., Ltd. shall not be liable for errors contained herein or for inc[...]