Samsung MD32C Bedienungsanleitung

LFD DISPLA Y User Manual The color and the appearance may diff er depending on the product, and the specifications are subject to change without prior notice to improv e the per formance. MD32C MD40C MD46C MD55C BN46-00098S-03[...]

T able of con tents Before U sing the Pr oduc t Cop yright 7 Safety Precautions 8 Symbols 8 Cleaning 8 Storage 9 Electricity and S afety 9 Installation 10 Operation 12 Pr eparations Checking the Conten ts 15 Removing the P ack aging (for MD32C MD40C and MD46C models only) 15 Removing the P ack aging (for MD55C models only) 16 Checking the Component[...]

T able of con tents Other Functions 84 Group Management 85 Schedule Management 87 T roubleshooting Guide 89 Screen Adjustmen t Picture Mode 91 If the input source is PC, DVI 91 If the input source is AV , Component, HDMI 91 Backlight / Contr ast / Brightness / Sharpness / Colour / T int (G/R) 92 Screen Adjustment 93 Picture S ize 93 Position 95 Zoo[...]

T able of con tents S ystem Multi Contr ol 117 Configuring settings for Multi C ontrol 117 Time 118 Clock Set 118 Sleep Timer 118 On Timer 119 Off T imer 120 Holiday Management 120 Menu Language 121 Rotate menu 122 E co Solution 123 Energy Saving 123 E co Sensor 123 No Signal P ower Off 123 A uto P ower Off 123 Security 124 Safety Lock 124 Button L[...]

T able of con tents A ll S har e P lay What is AllShar e P lay ? 148 Read the following bef ore using AllShare P lay with a USB device 148 Using a USB device 150 Connecting to a PC over a network 151 Using the AllShare P lay featur es 152 Using the Basic AllShar e P l ay Featur es 153 Sor ting the file lists 153 Playing Selected Files 154 Copying F[...]

Appendix Contact SAMSUNG WORLD WIDE 235 Responsibility for the Pa y Ser vice (C ost to Customers) 244 Not a product defect 244 A Product damage caused by customer's fault 244 Others 244 WEEE 245 Correct Disposal of This Pr oduct ( W aste Electrical & Electronic Equipment) 245 Correct disposal of batteries in this product 245 Optimum Pictur[...]

7 Befor e U sing the P roduc t Chapter 01 C opyright The contents of this manual are subject to change without notice to impr ove quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibit ed. Micr[...]

8 Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK , DO NOT REMOVE COVER. (OR BA CK ) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING T O QUALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside. It is dangerous to make any k ind of contact with[...]

9 Stor age Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the pr oduct. ― Contact Customer Service Centre if the inside of the product needs cleaning (ser vice fee will be charged). Electricit y and Safety ― The following images ar e for ref erence only . Real-life situations [...]

10 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung. Do not use the power cord with other pr oducts. • A fire or electric shock may result. ! Keep the power socket where the power cord is connected uno[...]

11 Do not install the product on an unstable or vibrating sur face (insecure shelf , sloped sur face, etc .) • The product may fall and become damaged and/or cause an injury. • Using the product in an area with excess vibration ma y damage the product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moistur[...]

12 Operation W arning There is a high voltage inside the pr oduct. Never disassemble, repair or modify the product yourself . • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. ! Before mo ving the product, turn off the power switch and disconnect the power cable and all other connected cables. • Dam[...]

13 ! Do not use or keep combustible spray or an inflammable substance near the product. • An explosion or fire may r esult. Ensure the vents ar e not blocked by tablecloths or cur tains. • An increased internal temperature ma y cause a fire. 1 00 Do not inser t metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (pap[...]

14 ! Rest your eyes for mor e than 5 minutes for every 1 hour of product use. • Eye fatigue will be relieved . Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ! Store small accessories out of the reach of childr en. ! Exercise caution when adjusting the pr oduct angle or stand heig[...]

15 P repar ations Chapter 02 Checking the Cont ents Removing the P ackaging (for MD32C MD40C and MD46C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box. 2 Remove the styrofoam fr om the product. 3 Check the p[...]

16 Removing the P ackaging (for MD55C models only) ― The following images ar e for ref erence only . Real-life situations may differ fr om what is shown in the images. 1 Remove the black locking device at the bottom of the box. 3 2 1 2 Using the groov es in the box, lift and remove the top of the box. 3 Check the components and remove the styrof [...]

17 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately . Checking the Components Componen ts ― Components may differ in diff[...]

18 Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount K it Stand RS232C-Stereo cable ( P. 56 ) DVI cable ( P. 44 ) HDMI-DVI cable ( P. 45 ) HDMI cable ( P. 45 ) Video cable ( P. 48 ) Component cable ( P. 48 ) RCA stereo cable ( P. 50 ) RCA cable ( P. 48 ) A V/Component adapter ( P. 48 ) Stereo cable[...]

19 P ar ts C ontrol P anel POWER ON P anel Ke y Speaker Remote sensor ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . P anel Key Buttons Description Po wer on the product. If you press the button when the product is turned on, the control menu will be displaye[...]

20 ― If you press the button on the panel key ( P. 19 ) when the product is turned on, the control menu will be displayed . Con trol menu CONTENT Return Buttons Description Sou rce Select the connected input source. Move the panel key right to select S ource in the control menu. When the list of input sources is displayed , move the panel key up [...]

21 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . RJ45 RS232C OUT IN HDMI IN DVI IN / MAGICINFO IN USB COMPONENT IN RGB IN AUDIO OUT RGB / DVI / HDMI / A V / COMPONENT / AUDIO IN Po r t Description RS232C IN Connects to MDC using an RS232C-stereo[...]

22 Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places . ― The locking device shape and lock ing method depend on the manufacturer . Refer to the user guide provided with your anti-theft locking device for details. ― Stand: Sold separately T o lock an an ti-thef t locking device: 1 F ix the cable [...]

23 - Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. MENU OFF VOL CH CONTENT (HOME) MagicInfo Lite/S .QZ 1 ABC 2 DEF 3 GHI 4 JKL 5 MNO 6 DEL-/-- SYMBOL 0 PRS[...]

24 TOOLS INFO MagicInfo 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information about the current input source. Move to the upper , lower , left or r ight menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. Manually select a connec ted input source fr om PC , DVI , HDMI . It sets safe lock function. Use[...]

25 Adjusting the OSD with the Remote C ontrol Buttons Description 1 Open the OSD menu. 2 Select from Picture , Sound , Network , Syste m or Support in the displayed OSD menu screen. 3 Change settings as desired. 4 F inish setting. 5 Close the onscreen display (OSD) menu . Remote Con trol Reception Range 7m ~ 10m 30˚ 30˚ Use the remote contr ol wi[...]

26 Before Installing the P roduct (I nstallation Guide) 15 ˚ T o prevent injur y , this apparatus must be securely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Other wise, it may fall and cause personal injur y . • Make sure to install[...]

27 A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Centre for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space speci[...]

28 Installing the W all M ount Installing the W all Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided with the wall mount. We r ecommend you contact a technician for assistance when installing the wall mount bracket. Samsu[...]

29 Unit: mm (inches) Model name VESA scre w hole specs (A * B) in millimeters Standard Screw Quantity MD32C 200 × 200 / 7.9 × 7.9 M6 4 MD40C MD46C 400 × 400 / 15.7 × 15.7 M8 MD55C ― Do not install your Wall Mount Kit while your product is turned on. It may result in personal injur y due to electric shock .[...]

30 Remote C ontr ol (RS232C ) Cable C onnection RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No .3), GND (No.5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontrol None Maximum length 15 m (only shielded type) • Pin assig nment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect data carrier 2 Received data 3 T ransmitted[...]

31 • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.5ø) LAN Cable • Pin assig nment 12345678 Pin No Standard C olour Signal 1 Whit e and orange TX+ 2 Orange T X- 3 Whit e and green RX+ 4 Blue NC 5 Whit e[...]

32 • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 <--------> 6 RX- Cross LAN cable (PC to PC) RJ45 P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ T X- 2 <--------> 6 R X- RX+ 3 <[...]

33 C onnec tion • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

34 C ontrol C odes V iewing control sta te (Get c ontrol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set control c ommand) Header Command ID Data length Data Checksum 0xAA Command type 1 V alue Command N o. Command type Command V alue range 1 Po wer control 0x11 0~1 2 Volume contr ol 0x12 0~100 3 Input source c[...]

35 P ower c ontrol • F unction A product can be powered on and off using a PC. • Viewing power state ( Get Power ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "P ower" "Po wer": Pow er code to be set on[...]

36 Input source c ontrol • F unction The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 "Input Source" "Input Sourc[...]

37 Screen mode contr ol • F unction The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo W all function is enabled. ― This control can only be used on models that include a T V . • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting t[...]

38 PIP On/Off control • F unction The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo W all is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command ID Dat[...]

39 V ideo W all Mode Con trol • F unction Video W all mode can be ac tivated on a product using a PC. This control is only available on a pr oduct whose Video W all is enabled. • Viewing video wall mode (Get Video Wall Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set V ideo W all Mode) Header Command ID D[...]

40 V ideo W all On • F unction T urn V ideo W all on or off on the product from your comput er . • Get Video W all On/O ff Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/O ff Header Command ID Data length Data Checksum 0xAA 0x84 1 V .Wall_On • V .W all_On: V ideo W all code to be assigned to the pr oduct 1: V[...]

41 10x10 V ideo W all M odel 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x[...]

42 10x10 V ideo W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header C ommand ID Data length Ack/Nak r- CMD Val1 Val2 Checksum 0xAA 0xFF 4 'A' 0x89 Wall_Div Wall_SNo • Nak Header Command ID Data length Ack/Nak r-CMD Val1 Checksum 0xAA 0xFF 3 'N' 0x89 ERR "ERR": A code showing[...]

43 C onnec ting and Using a Sour ce De vice Chapter 03 Befor e Connecting Check the following bef ore you connect this product with other devices. Devices that can be connected to this product include PCs, camcorders , speakers, set top boxes and DVD/Blu-ray Disc players . POWER Pr e - connec tion Checkpoints ― Before connecting a source device ,[...]

44 C onnec ting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ― Connecting par ts may differ in diff erent products. C onnec t[...]

45 C onnec tion Using an HDMI-DVI C able ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN RGB / DVI / HDMI / A V / C OMPONENT / A UDIO IN C onnec tion Using an HDMI Cable HDMI IN[...]

46 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality . ― The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. Changing the Resolution on Windo ws XP Go to Contr ol Panel Display Settings , and change the resolution. Changing the Re[...]

47 Changing the Resolution on Windo ws 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution. Changing the Resolution on Windo ws 8 Go to Settings Control Panel Display Screen Resolution , and change the resolution.[...]

48 C onnec ting to a V ideo Devic e • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video device to the product using a cable. ― Connecting par ts may differ in diff erent products. ― Pr ess the SOURCE button on the remote [...]

49 C onnec tion Using an HDMI-DVI C able ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. T o resolve this , additionally connect an audio cable to the audio por ts on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name to DVI Devices[...]

50 C onnec ting to an A udio Sy stem ― Connecting par ts may differ in diff erent products. A UDIO OUT[...]

51 C onnec ting the network bo x (Sold separat ely) ― F or details on how to connect to a network box, refer to the user's manual pr ovided with the network box upon purchase. MagicInfo T o use MagicInfo , a network box (sold separately) must be connected to the product. ― T o change the MagicI nfo settings, run " MagicinfoSetupWizard[...]

52 MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 .[...]

53 Changing the Input sourc e S ou rce MENU m → Support → Contents Home → Source → ENTER E Source HDMI AV Component PC DVI PC --- --- --- --- MagicInfo --- T ools Return - The displayed image may diff er depending on the model. Sou rce allows you to select a variety of sources and change source device names. Y ou can display the scr een of [...]

54 U sing MDC Chapter 04 C onguring Settings for M ulti C ontrol MENU m → Syste m → Multi Control → ENTER E Assign an individual ID to y our product. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess ▲ / ▼ to select a number, and pr ess E . • ID Input Enter the ID number of the produc[...]

55 MDC Pr ogr ammeme Installation/Uninstallation Installation 1 Inser t the installation CD into the CD-ROM dr ive. 2 Click the MDC Unified installation programme . 3 Select a language for installation. Next, click " OK ". 4 When the " W elcome to the InstallShield Wizar d for MDC_Unified " screen appears, click " Next &quo[...]

56 Wha t is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. C onnec ting to MDC Using MDC via RS-232C (serial data communica tions standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor . RS232C OUT / IN Mon[...]

57 Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 por t on the product and the LAN por ts on the HUB. RJ45 HUB Monitor 1 Monitor 2 C[...]

58 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. RS232C OUT RJ45 Monitor 1 Monitor 2 Computer[...]

59 C onnec tion Management Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MA C, and Connection Type), connection status, Set ID Range , and detected devices. Each connection can contain a [...]

60 U ser L ogin Launching the programme displays the user log in window. The initial login ID ( passwor d : admin ) and password ( Auto L ogin : admin ) are set to admin . ― After logging in for the first time , make sure to change the password to ensur e securit y . ― T o change the password, go to Home > User Settings . After you are logge[...]

61 A uto S et ID Auto Set ID f eature assigns a Set ID for all the LFDs connected in daisy-chain of a selected connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 t o 99, and then finally to Set ID 0. ― ID for the last 100th LFD is set to 0.[...]

62 Cloning Using the Cloning featur e, you can copy the setting of one LFD and apply it to multiple selected LFDs. Y ou can select specific tab categories or all tab categories for cloning, using the cop y setting option window. ― T o delete the settings you have configured , click the Paste Settings button.[...]

63 C ommand Retr y This featur e is used to specify the maximum number of times the MDC command will be retried in case of there being no reply or a corrupted reply fr om an LFD. The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.[...]

64 Getting Star ted with MDC 1 T o star t the programme, click Start → Progr ammes → Samsung → MDC Unified . The login window appears after the MDC prog ramme is launched. Enter the user ID and password . • The default user ID and password ar e admin . • Make sure to change the password after the first login. 2 Click Add to add a display [...]

65 Main Screen Lay out 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the programme. 2 Device Cat egor y View a list of connected display devices or device groups . 3 Schedule Category View a list of schedules for display devices . 4 Set List Select the display device you want to adjust. 5 Modify the Set List Add,[...]

66 V olume 1 2 3 ― The volume can be changed or the sound can be muted only f or displays that are turned on. V olume • Adjust the volume of a selected display . • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute • Enable or disable Mute for a selected display . Mute will automatically be disabled if V olume is[...]

67 User L ogin User Settings • Add, delete or edit log in information. Logout • Log out fr om the current user account as follows. • Click Logout . The message " Do you w ant to log admin out? " is displayed • Click Ye s . The user login window appears. • If you do not want to log in, click Close . The programme is closed . ― [...]

68 Color - Color and T int (G/R) are not available if the input sour ce is PC . - C olor , T int ( G/ R) , C olor T one and C olor T emp . are not available if both PC S ource and V ideo S ource are selected. Color • Adjust the colours for the selected display device . Tint ( G/R) • Adjust the tint for the selected display device . Color T one [...]

69 MPEG Noise Filt er Reduces MPEG noise to provide impr oved picture quality. • Off / Low / M edium / High / Auto Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bott om areas of the video image to provide a mor e immersive viewing experience. • Off : Turns off the Cin[...]

70 Adv anced fea tures 3D Con trol 3D M ode Select the 3D input format. 3D L/ R C hange Swap the left and right pictures. 3D → 2D Displays the image for the left eye only . 3D A uto V iew If you set 3D Auto V iew to Message Notice , a pop up message window appears when the product receives a 3D signal . 3D O ptimiza tion The overall adjustment of[...]

71 Advanc ed Settings D ynamic C ontrast Adjust the screen contrast. G amma C ontrol Adjust the primary colour intensit y . RGB O nly M ode Displays the Red , Green and Blue colour for making fine adjustments to the hue and saturation. F lesh T one Emphasize pink “Flesh T one. ” M otion L ighting Reduces power consumption by reducing scr een br[...]

72 Sound Adjustment - The Bass or T reble item will be disabled if the item is not supported by the selected set. Y ou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. B ass • Adjust the bass for the selected display . T reble • Adjust the treble f or the selected display. B alance (L/ R) ?[...]

73 F ormat • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row . ― A maximum of 6 can be assigned to V if 15 is assigned t o H . V • Select the number of ver tical display devices. • A maximum of 15 displays can be arranged[...]

74 General User A uto Color • Automatically adjust the screen colours . ― Available only in PC mode. Auto P ower • Set the product to automatically power on. Standby C ontrol • Set the standby mode to activate if an input source is not detected. F an & T empera ture Configure the settings r equired to detect the fan speed and internal t[...]

75 Security Safety Lock • Lock the on-scr een menus. ― T o unlock the menus, set Safety Lock to Off . Button Lock • Lock the buttons on the displa y device. ― T o unlock the buttons, set Button Lock to Off . OSD Display Source OSD • Select whether to display a message when the So urce is changed. Not Optimum Mode OSD • Select whether to[...]

76 Time C lock S et Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer O n T imer • Repeat : Specify the period for which you want to r epeat the selected Timer . Once , EveryDay , Mon~F ri , Mon~Sat , Sat~Sun , Manual • Hol[...]

77 Holiday Management Holiday Management allows you t o prevent devices that are set to be power ed on by the Timer from turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu . • Add : Y ou can specify holidays. Click the Add button in the Holiday Management window . • Delete :[...]

78 S creen S aver ― Period (Hour) and T ime (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configur ed when I nter val is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer : Y ou can set the timer for Screen Sav er [...]

79 S afety S creen The Saf ety Screen func tion can be used to prevent scr een burn-in when a stationar y image displays on the screen of a display device for an extended period of time. L amp C ontrol Lamp Con trol is used to adjust the backlight to reduce power consumption. Automatically adjust the backlight of the selected display device at a sp[...]

80 Tick er Input tex t while a video or image is displayed and display the t ex t on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the scr een. Timer Set the Start Time and End Time to display a message ( Message ). Position Select an orientation to display a message ( Message ) from Horizontal and[...]

81 T ool Settings Security • Panel C ontrol : T urn on or off the screen of a display device. • Remote Contr ol : Enable or disable the remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound : Reset the sound settings. • Reset System : Reset the syst em settings. • Reset All : Reset the screen, sound and system[...]

82 Edit C olumn O ptions Configure the settings f or the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC programme. After selecting a language, r estar t the MDC programme to use the selected language. • Command Retry Count : Specify the number of retry attempts when a command fails. • Er[...]

83 M onitor W indow A window appears showing details f or data transfer between the computer and display devices. • Filt er View the programme inf ormation. I nformation[...]

84 Other F unc tions Resizing a Window Place the mouse pointer on a corner of the programme windo w. An arro w will appear . Move the arrow to customiz e the size of the programme window .[...]

85 Group Management Creating Gr oups Create gr oups and manage the list of sets on a group basis. ― Duplicate group names cannot be used . 1 Right-click and selec t Group Edit in the display device list section on the lef t side of the programme window . - The Add on the same lev el button is enabled only if at least one group is created . 2 In t[...]

86 • Add on the sub lev el : Create a sub- group under the selected gr oup. 3 Enter the group name . Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delet e . 3 Click Ye s . The group will be deleted .[...]

87 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new gr oup name. Schedule Management Creating Schedules Create and r egister a schedule on a group basis. 1 Click All Schedule List in the schedule section on the left side of th[...]

88 2 Click the Add button. The Add Schedule window will appear . 3 Click Add below the Device Group item, and select the group you want to add a schedule t o. 4 Select Date&Time / Action and click OK . The schedule will be added and a list of schedules will appear in the set list window . - Device Group : Select a group . - Date&T ime Insta[...]

89 T roubleshooting Guide - This programme may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted fr om nearby electronic devices. Issue Solution The display y ou want to contr ol does not appear on the system inf ormation char t. 1 Check the connection of the RS232C cable (check that th[...]

90 How display pr oper ties are shown when multiple displa ys are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displa yed. 3 When two displays are selected (e.g . in sequence of ID 1 and ID 3): The settings for ID 1 are display ed before the settings f or I[...]

91 Screen A djustment Configure the Picture settings ( Backlight , Colour T one , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 P ic ture M ode MENU m → Picture → Picture Mode → ENTER E Select a picture mode ( Picture Mode ) suitable for the environment wher e the product will be used. Different[...]

92 B acklight / C ontr ast / B righ tness / S harpness / C olour / T i nt ( G /R ) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint ( G/R) Information 60 70 45 50 50 G 50 R 50 - The displayed image may diff er depending on the model. Y our product has several options f or adju[...]

93 S cr een A djustment MENU m → Picture → Screen Adjustment → ENTER E · Screen Adjustmen t Picture Size 16:9 Zoom/P osition PC Screen Adjustment Resolution Selec t O - The displayed image may diff er depending on the model. choose size and aspect ratio picture displayed on screen. P ic ture S ize ― Different Scr een Adjustment options [...]

94 Picture Sizes a vailable by Input Source . Input Source Picture Size AV , Component (480i, 480p) 16:9 , Zoom1 , Zoom2 , 4:3 , C ustom Component (1080i, 1080p) 16:9 , Wide F it , Screen Fit , 4:3 , C ustom HDMI (720p, 1080i, 1080p) 16:9 , Smart View 1 , Smart View 2 , Wide F it , 4:3 , Screen Fit , Custom HDMI (480i, 480p) 16:9 , Zoom1 , Zoom2 , [...]

95 P osition · Screen Adjustmen t Picture Size P osition PC Screen Adjustment Resolution Selec t Zoom1 O - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if Picture Size is set to Z oom1 , Zoom2 , Wide F it , Screen Fit or Custom . ― T o use the Position function after selecti[...]

96 PC S creen A djustm · Screen Adjustmen t Picture Size Zoom/P osition PC Screen Adjustment Resolution Selec t Custom O - Available in PC mode only . - The displayed image may diff er depending on the model. • Coarse / F ine Removes or reduces picture noise . If the noise is not removed by F ine-tuning alone, use the Coarse function to adjus[...]

97 A uto A djustment MENU m → Picture → Auto A djustment → ENTER E Picture Auto A djustment - Available in PC mode only . - The displayed image may diff er depending on the model. Adjust frequency values/positions and fine tune the settings automatically . R ota tion MENU m → Picture → Rotation → ENTER E · Picture Rotation Aspect Ratio[...]

98 A spec t R atio MENU m → Picture → Aspect Ratio → ENTER E · Picture Rotation Aspect Ratio P or trait F ull Screen - The displayed image may diff er depending on the model. Set the rotated screen t o be either full screen or original. • F ull Screen : Display the rotated screen in full scr een. • Original : Display the rotated scr een [...]

99 A dvanc ed S ettings MENU m → Picture → Advanc ed Settings → ENTER E Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Colour Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model. Input Source Picture Mode Advanc ed Settings PC , DVI , HDMI (wh[...]

100 Advanc ed Settings Dynamic Contrast Black T one Flesh T one RGB Only Mode Colour Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model. D ynamic C ontrast Adjust the screen contrast. • Off / Low / M edium / High B lack T one Select the black level to adjust the screen dep[...]

101 Advanc ed Settings White Balance 10p White Balance Gamma Motion Lighting O 0 O - The displayed image may diff er depending on the model. W hit e B alance Adjust the colour temperature f or a more natural picture. • R-Offset / G- Offset / B-O ffset : Adjust each colour’ s (red, gr een, blue) dark ness. • R-Gain / G- Gain / B- Gain : [...]

102 P ic ture O ptions MENU m → Picture → Picture Options → ENTER E Picture Options Colour T one Colour T emp . Digital Noise F ilter MPEG Noise F ilter HDMI Black Lev el F ilm Mode Motion Plus Standard 10000K O O Normal O O - The displayed image may diff er depending on the model. Select an option using the ▲ and ▼ arrow keys[...]

103 Picture Options Colour T one Colour T emp . Digital Noise F ilter MPEG Noise F ilter 10000K O O - The displayed image may diff er depending on the model. C olour T one If the input source is PC , DVI or HDMI (PC connection). • Off / Cool / Standard / W arm If the input source is AV , Component , HDMI . • Off / Cool / Standard / W arm1[...]

104 Picture Options HDMI Black Lev el F ilm Mode Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model. HDMI B lack L eve l Selects the black level on the screen to adjust the screen depth. • Normal / Low ― Available only in HDMI and DVI mode (A V Timing : 480p , 576p, 720p , 1080i, 1080p)[...]

105 Picture Options HDMI Black Lev el F ilm Mode Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model. D ynamic B acklight Automatically adjust the backlight to provide the best possible screen contrast under the curr ent conditions. • Off / On ― The Dynamic Backlight is not available whe[...]

106 Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduct. Chapter 06 S ound M ode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Y ou can select a sound mode to suit your personal pref erences. • Standar[...]

107 S ound E ec t MENU m → Sound → Sound Effect → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Configure your pr eferred sound effect f or output sound. ― If Speaker Selec t is set to External , Sound Effect is disabled. ― Available only when Soun[...]

108 S peak er S ettings MENU m → Sound → Speaker Settings → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. • Speaker Select ( External / Internal ) If you are listening to the sound track of a broadcast or mo vie through an external receiver , you may he[...]

109 R eset S ound MENU m → Sound → Reset Sound → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Reset all sound settings to the factor y defaults.[...]

110 Network Chapter 07 C onnec ting to a Wir ed Network There are thr ee ways to attach your product to your LAN using cable . • Y ou can attach your pr oduct to your LAN by connecting the LAN por t on the back of your product to an external modem using a LAN cable. See the diagram below . RJ45 The Modem Port on the Wall External Modem (ADSL / VD[...]

111 • Depending on how your network is configured, you ma y be able to attach your product to your LAN by connecting the LAN por t on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below . Note that the wall outlet is attached to a modem or router elsewher e in your house. The LAN Port on the W all L[...]

112 3 On the dialog that appears, click the Support tab. 4 On the Support T ab, click the Details button. The Net work connection values are displayed. How to set up manually 1 Go to the Network Settings screen. Select Start , press E , and then press E again. 2 The network test screen appears and the verification process starts. Pr ess Stop . The [...]

113 ― If your router , modem, or device is not certified, it may not connect to the product via the “Samsung Wireless LAN adapter” . ― Ensure the product is turned on befor e you connect the “Samsung W ireless LAN adapter ” . ― Connection Methods: Y ou can setup the wireless network connection in three ways. Auto Setup (Using the Auto[...]

114 How to set up manually 1 Go to the Network Settings screen. Select Start , press E . 2 The Network function searches for a vailable wireless networks. When done, it displays a list of the available networks. 3 In the list of networks, press the or button to select a network, and then press the E button twice. ― If the wireless router is set t[...]

115 N etw ork S tatus MENU m → Network → Network Status → ENTER E Y ou can check the current network and Internet status. Network Status Y our wireless network and Internet connection are setup and ready to use. Y ou are connected to the Internet. If you have an y problems using online services, please contact your Internet service provider .[...]

116 S oft AP MENU m → Network → Soft AP → ENTER E Using this function, you can connect the product on your mobile devices if your mobile devices do not support Wi-Fi Direct . Set the options for connection of Wi-F i device. • Soft AP T urns on or off the Sof t AP . When Soft AP is set to On , your mobile devices can find the product name in[...]

117 S yst em Chapter 08 M ulti C ontrol MENU m → Syste m → Multi Control → ENTER E Multi Contr ol ID Setup ID Input MDC Connection 00 -- RS232C MDC - The displayed image may diff er depending on the model. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess ▲ or ▼ to select a number, and pr [...]

118 T ime MENU m → Syste m → Time → ENTER E 끄기 Time Clock Set Sleep Timer On Timer O Timer Holiday Management O - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep T imer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function. C lock S [...]

119 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. On T imer Set On Timer so that your pr oduct tur ns on automatically at a time and on a day of your choosing . The power is turned on with the specified volume or input source . On Timer : Set the on timer by making a selection from one of the [...]

120 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. O T imer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options . ( Off Timer1 ~ Off Timer7 ) ― Y ou must set the clock befor e you can use Off Timer . • Setup : Select O ff , Once , Ever yd ay , Mon~Fri , M[...]

121 M enu L anguage MENU m → Syste m → Menu Language → ENTER E Time Menu Language Rotate menu Eco Solution English Landscape System - The displayed image may diff er depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu displa y. It will not be applied to other functions [...]

122 R otate menu MENU m → Syste m → Rotate menu → ENTER E System Time Menu Language Rotate menu Eco Solution English Landscape - The displayed image may diff er depending on the model. Configure the menu scr een. • Landscape : Display the menu in landscape mode (default). • Portrait : Display the menu in portrait mode on the right side of[...]

123 E co S olution MENU m → Syste m → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor No Signal P ower O Auto P ow er O  O O 15 min O - The displayed image may diff er depending on the model. E nergy S aving Reduce the power consumption by adjusting the screen brightness. Selecting Picture Off switches off the scre[...]

124 S ecurity MENU m → Syste m → Security → ENTER E Securit y Safety Lock Button Lock Change PIN O O - The displayed image may diff er depending on the model. Every time you access the Security func tions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0 - 0 - 0). S afety L ock It set[...]

125 PIP MENU m → Syste m → PIP → ENTER E System PIP Auto Pr otection Time Screen Burn Pr otection Ticker Video W all O O O - The displayed image may diff er depending on the model. - F or PIP sound, ref er to the S ound S elect instructions. - If you turn the product off while watching in the PIP mode, PIP mode will remain after powe[...]

126 A uto P r otec tion T ime MENU m → Syste m → Auto Prot ection Time → ENTER E System Auto Pr otection Time Screen Burn Pr otection Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model. If the screen displays a still image for a certain period of time you define, the product activ[...]

127 S cr een B urn P r otec tion MENU m → Syste m → Screen Burn Protection → ENTER E Screen Burn Pr otection Pix el Shift Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. T o reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention t ech[...]

128 Screen Burn Pr otection Pix el Shift Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. T imer Y ou can set the timer for Scr een Burn Protection . The Pix el Shift feature stops automatically after a specified period of time. Timer • Off • Repeat : Display the image retention-pr [...]

129 Screen Burn Pr otection Pix el Shift Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. I mmediate display Select the screen saver you want to display immediat ely. • Off / Pixel / Rolling bar / F ading screen S ide G rey When the screen is set to 4:3 aspect ratio, adjust the bright[...]

130 T icker MENU m → Syste m → Ticker → ENTER E System Auto Pr otection Time Screen Burn Pr otection Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On ― Message , Time , P osition ,[...]

131 V ideo W all MENU m → Syste m → Video W all → ENTER E · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. - The V ideo W all option is only enabled when PIP is set to O . - If more than four displays are connected horizontally and v er[...]

132 · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. V er tical This function automatically divides the screen according to the specified number of v er tical displays. Enter the number of vertically arranged displays. The vertical screen will a[...]

133 S ou rce A u to S witch S ettings MENU m → Syste m → Source AutoS witch Settings → ENTER E · · · Source A utoSwitch Settings Primary Source Recovery Primary Source Secondar y Source Source Aut oSwitch On O All PC - The displayed image may diff er depending on the model. T urning on the display with Source AutoS witch On , and the pr[...]

134 G ener al MENU m → Syste m → General → ENTER E General Max. Po wer Saving Game Mode BD Wise Menu T ransparency Sound F eedback Auto P ow er Standby Con trol On O On Medium Low O Auto - The displayed image may diff er depending on the model. M ax. P o wer S aving T urns off the product to reduce power consumption after the PC has bee[...]

135 General Sound F eedback Auto P ow er Standby Con trol Lamp Schedule OSD Display P ower On Adjustment T emperature Control O O Auto O 0 Sec 77 - The displayed image may diff er depending on the model. S ound F eedback Y our product gives sound f eedback when you use product. Sound Feedback is enabled by default. Turn off Sound F eedback[...]

136 General Sound F eedback Auto P ow er Standby Con trol Lamp Schedule OSD Display P ower On Adjustment T emperature Control O O Auto O 0 Sec 77 - The displayed image may diff er depending on the model. L amp S chedule Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode . • Off / On OSD D ispl[...]

137 A nynet + (HDMI - CEC ) MENU m → Syste m → Anynet+ (HDMI-CEC) → ENTER E Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O Receiver On Ye s O - The displayed image may diff er depending on the model. - The A nynet + functions do not operate with other manufacturers ’ products. - F or instructions explaining how to connect Anynet+ [...]

138 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O Receiver On Ye s O - The displayed image may diff er depending on the model. A uto T urn O Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Ye s ― If Auto T urn Off is set to Ye s , running external devices will turn off at the same time as[...]

139 T roubleshooting f or Anynet+ Pr oblem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ syst em suppor ts Anynet+ devices only . • Check if the Anynet+ device power cor d is properly connected. • Check the Anynet+ device ’ s Video/Audio/HDMI cable connections. • Check whether Anynet+ (HD[...]

140 Pr oblem Possible Solution The connected device is not displayed. • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu . • Search Anynet+ devices again. • Anynet+ requir es an HDMI connection[...]

141 D iv X ® V ideo O n D emand MENU m → Syste m → DivX ® V ideo On Demand → ENTER E System DivX ® Video On Demand On - The displayed image may diff er depending on the model. Shows the registration code authorized f or the product. If you connect to the DivX Ⓡ web site and register using that code , you can download the VOD registration[...]

142 Export the product settings to a USB device or load the settings via a USB de vice. This option is useful when assigning the same settings to several pr oducts. • Clone to USB : Copy the pr oduct settings to a USB device. • Clone Fr om USB : Assign the settings saved in a USB device to the pr oduct. - After configuration is complete, the pr[...]

143 R eset A ll MENU m → Syste m → Reset All → ENTER E System Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default factor y settings. PC module pow er MENU m → Syste m → PC module power → ENTER E System PC module power - The displayed image may dif[...]

144 Suppor t Chapter 09 S oft war e U pd ate MENU m → Support → S oftware Update → ENTER E The Software Update menu lets you upgrade your pr oduct soft ware to the latest version. ― Be careful not to turn off the power until the upgrade is complet e. The product will turn off and on automatically after completing the software upgrade. ― W[...]

145 C ontac t S amsung MENU m → Support → Contact Samsung → ENTER E View this information when your pr oduct does not work properly or when you want to upgrade the software. Y ou can find information r egarding our call Centres and how to do wnload products and soft ware. ― Contact Samsung and find the product Model Code and Software V ersi[...]

146 C ontents H ome MENU m → Support → Contents Home → ENTER E Suppor t Conten ts Home - The displayed image may diff er depending on the model. M agic I nfo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― MagicInfo Lite can also be accessed by pressing MagicInf o Lite/S on the remote control . ― T o launch Mag[...]

147 - The input source can also be changed by using the SOURCE button on the remote control . A ll S hare P lay MENU m → Support → Contents Home → AllShare P lay → ENTER E Enjoy videos, photos , music files saved on a USB Mass Storage Class (MSC) device. ― Refer to page 148 f or details about the AllShare Play menu. S ou rce MENU m → Su[...]

148 A ll S har e P l ay Chapter 10 Wha t is A ll S hare P l ay ? Play photo , video or music files saved on a storage device. Wir elessly connect a smar tphone to a PC using a wireless network . Play various content using one of the f ollowing methods in AllShare Play : • Using internal memor y and a USB device: Play video , photo and music files[...]

149 Compa tible devices with AllShar e P lay • Some types of USB devices, digital cameras and audio devices may not be compatible with the product. • AllShare Pla y is only compatible with USB MSC devices. • MSC device refers t o a Mass Storage Class Bulk-Only T ranspor t device. Examples of MSC devices include Thumb drives, Flash car d reade[...]

150 Using a USB devic e Connecting a USB device 1 T urn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message New device connected. appears when the USB device is connected properly . Select type of content to play from V ideos , Photos , and Music . [...]

151 C onnec ting to a PC ov er a network Play photo , video and music files saved on a PC through a network connection in AllShare Play mode . • F or details on how to configure a network, refer to the section Network Settings . • T o view content saved on the PC, connect the product and PC to the same wireless router and visit http://www .sams[...]

152 Using the A ll S hare P lay fea tures If you connect the product and a source device such as a cell phone or PC to the same network , you can play media content sav ed on the device such as videos, photos and music. Visit http://www.samsung .com or contact the Samsung Electronics Customer Centre f or more information. Additional software may ne[...]

153 Using the Basic A ll S hare P lay F eatures MENU m → Support → Contents Home → AllShare P lay → ENTER E AllShare Play / My List / Recently Played What's new Playlist Recently played les will be displayed here. No playlists have been created. Create a playlist to quickly and easily access your content. Updated les will be disp[...]

154 Playing Selected F iles 1 Select files from the list of Videos , Photos , or Music files . 2 Pr ess TOOLS on the remot e control and select Play selection . ― The option does not appear if a folder is highlighted b y the cursor . 3 Select files and press Play . ― c appears for selected files. ― T o selec t all the files in the current fol[...]

155 My list MENU m → Support → Contents Home → AllShare P lay → My list → ENTER E Access desired content mor e conveniently and quickly. T o play files, select files or a Playlist and press E . • Recently play ed : Display video, photo or music files that wer e recently played . T his mode is suitable when playing files again that were [...]

156 V ideos MENU m → Support → Contents Home → AllShare P lay → Videos → ENTER E Playing a V ideo 1 Select the internal memor y or a USB device. Select files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • The file name appears on the top with its playing time. • If video time information is unk nown, the playing[...]

157 P hotos MENU m → Support → Contents Home → AllShare P lay → Photos → ENTER E V iewing a Photo (or Slide Sho w) 1 Select the internal memor y or a USB device. Select a file from the list of files. 2 Pr ess the E button. • T o view files manually, one at a time, pr ess the left or r ight arrow buttons . • T o star t the slide show ,[...]

158 M usic MENU m → Support → Contents Home → AllShare P lay → Music → ENTER E Playing M usic 1 Select the internal memor y or a USB device. Select files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • When the music is playing, you can sear ch using the π (REW ) and µ (FF) button. ― If the sound is abnormal wh[...]

159 V ideos / P hot os / M usic Pla y Option menu When playing video or photo files, y ou can press the TOOLS butt on to display an Options menu. Option Name Operations V ideos Photos Music V i ew Sor t music files grouped by F older view , T itle , Ar tist , Album or Genre . c Pl ay selection Select and play files from a list of music files. c Go [...]

160 Option Name Operations V ideos Photos Music So und Mo de Y ou can change the Sound Mode . c c A u dio L a nguage Y ou can enjoy video in one of supported languages. The function is enabled only when you play stream-type files which support multiple audio formats. c Su btitle Y ou can view a subtitle. Y ou can select a specific language if the s[...]

161 Suppor ted Subtitle and AllShar e Play le f ormats Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.sr t) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • Po werdivx (.psb) • Xsub Container: A VI • SubStation Alpha Container: MK V ?[...]

162 Suppor ted music le forma ts F ile Ex tension T ype C odec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek ( jump) func tion is not suppor ted. Supports up to 2 channel Suppor ted V ideo F ormats • Video content will not play , or not play correctly , if there is an error in the conten[...]

163 F ile Extension Con tainer Video C odec Resolution Fr ame rate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA D[...]

164 M ag ic I n fo L ite Chapter 11 F ile F ormats C ompatible with M agic I n fo L ite play er Read befor e using M agic I nfo L ite play er • The file system supports F A T16, F A T32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played . Check the vertical and horizontal resolution [...]

165 Con tents F ile Ex tension C ontainer Video C odec Resolution Fr ame rate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3 LPCM AAC HE-AAC WMA DD+ MPEG(MP3)[...]

166 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correc[...]

167 Flash P ow er Poin t • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer on a Windows operating system cannot be guaranteed Optimization is needed during content creation • Flash Video - Compatible file format : FL V - Video [...]

168 PDF WORD • Compatible document file formats - Extension : pdf • F unctions not suppor ted - Content less than 1 pixel not supported because of per formance degradation issue. - Masked I mage, Tiled Image content not supported. - Content with Rotated T ext, not suppor ted. - 3D Shadow Effects not supported. • Compatible document file forma[...]

169 Appr oving a connected devic e from the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Lite from the menus on the left. 5 Select Unapproved from the sub-menus of Lite . 6 Select the Approve button f or your device from the list of unapprov [...]

170 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the corre[...]

171 M agic I n fo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― T o launch MagicInfo Lite , select MagicInfo Lite for the Play Mode on the System . ― Pr ess the MagicInfo Lite/S button on the remote contr ol. M agic I nfo L ite play er Network schedule Y ou can view whether the server is connected (approval) in the[...]

172 Local schedule MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run 1 Select Local schedule in the MagicInfo Lite play er menu screen.[...]

173 USB Device A uto P l ay MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in the " MagicInfoS lide " folder on USB Storage. ― Ens[...]

174 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , select and play content from internal or USB memory according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedul[...]

175 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Deselect All Cancel Duration Return - A maximum of 99 content files can be selected. 5 Select Duration Menu1.jpg 00:00:05 00:00:05 Menu2.jpg Direction Contents Duration Up Down Save Cancel Return Specify the sequ[...]

176 6 Select S ave . Selec t the memor y space you want to sav e the content to. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Contents --:-- am~ --:-- pm No Items ave ncel --:-- am~ --:-- pm Time Cont Return Delete Internal USB Cancel Where do you want to sav e? 7 Check that th[...]

177 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Sched[...]

178 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to run. Next,[...]

179 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to view the details of. 2012.01.01_1834.lsch Create [...]

180 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule files to copy are sav ed. Internal Memory 2012.01.01_[...]

181 C ontent manager Cop ying content 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy . Menu2.jpg 5549.2MB 0.0MB (0) 6227.2MB 0.2MB (2) Menu1.j[...]

182 Deleting cont ent 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete. Next, select Delete . • Content under Internal Memory and USB memor [...]

183 S ettings Settings Server Network Settings Default content duration Content ra tio Image Eect Default content Content La yout Schedule Name Safely Remove USB Device Return Close Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model. Ser ver Network Settings T o run MagicInfo Lite , connect to a network . S e[...]

184 Default content duration Specify the duration to play content. • Image View er Time , Doc viewing time , PPT View er Time , PDF viewing time , F lash viewing time ― The duration must be at least 5 seconds. C ontent Ratio Specify the display aspect ratio by type when playing content. • Doc Ratio , PPT ratio , PDF ratio , V ideo ratio - Ori[...]

185 When C ontent is Running V iewing the details of the conten t that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBX GDSP-0100.18 : Monitor : FF-FF-FF-FF-FF-FF : L ocal schedule : Disconnected : Connected : No Schedule to download - The displayed image may diff er depending on the m[...]

186 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model. Pr ess the TOOLS button on the r emote control. Y ou can change the Picture Mode or Sound Mode s[...]

187 M ag ic I n fo P r emium S Chapter 12 A Licence needs to be purchased to use MagicInf o Premium S . T o download the soft ware, go to the Samsung homepage at http://www .samsunglfd.com. T o purchase a licence, contact a Customer Ser ver Centre . F ile F ormats C ompatible with M agic I n fo P remium S P la yer Read befor e using M agic I nfo P [...]

188 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correc[...]

189 Flash P ow er Poin t PDF • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer on a Windows operating system cannot be guaranteed Optimization is needed during content creation • Flash Video - Compatible file format : FL V - Vi[...]

190 WORD T emplate les LFD • Compatible document file formats - Extension : .doc, .docx - Version : Office 97 ~ Office 2007 • F unctions not suppor ted - P age background effect - Some paragraph styles - Wor d Ar t - Align A group alignment err or may occur - 3D shapes (which will be displayed in 2D) - Office 2007 SmartAr t is not fully supp[...]

191 Network Schedule Multiframe Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or Office files (PPT and W ord files) and PDF files, only one file type is supported at a time. •[...]

192 Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or Office files (PPT and W ord files) and PDF files, only one file type is supported at a time. • Multiple videos ( Videos ) [...]

193 Appr oving a connected devic e from the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Premium from the menus on the left. 5 Select Unapproved from the sub-menus of Pr emium . 6 Select the Approve button f or your device from the list of un[...]

194 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the corre[...]

195 M agic I n fo P remium S MENU m : T Support C ontents Home MagicInfo Premium S ENTER E ― T o launch MagicInfo Premium S , select MagicInfo Premium S f or the Play Mode on the Syste m . ― Pr ess the MagicInfo Lite/S button on the remote contr ol. M agic I nfo P remium S P la yer Network schedule Y ou can view whether the server is connected [...]

196 Local schedule MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close T emplate Pla yer MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local sche[...]

197 Internal A uto P lay MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in Internal Memory . 1 Select Internal Auto Pla[...]

198 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , select and play content from internal or USB memory according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla y[...]

199 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Deselect All Cancel Duration Return - A maximum of 99 content files can be selected. 5 Select Duration Menu1.jpg 00:00:05 00:00:05 Menu2.jpg Direction Contents Duration Up Down Save Cancel Return Specify the sequ[...]

200 6 Select S ave . Selec t the memor y space you want to sav e the content to. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Contents --:-- am~ --:-- pm No Items Save ncel --:-- am~ --:-- pm Time Con Return Delete Internal USB Cancel Where do you want to sav e? 7 Check that th[...]

201 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Sched[...]

202 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the loca[...]

203 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to view the details[...]

204 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule files to copy are sa[...]

205 T emplate M anager Registering a T emplate 1 Select T emplate Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select Create in the T emplate Manager screen. T emplate[...]

206 4 Organize a templat e by inser ting text, video, photo , or PDF files as desired. Crea te Select the position and the background. Use background image Preview Previous Next Cancel - T o load a file or manually enter text, selec t T ext input . C on tents Conten ts T ype Contents Size Source None No Items Fit t o screen PC OK Cancel Return • [...]

207 5 Select sound or background music. Crea te Select sound or background music. Background Music Preview Previous Next Cancel • If two Videos files are assigned , select the file with the sound you want to use. - If one of the video files includes PIP content, sound from the PIP content can be selected. • If a Flash file is selected, it is no[...]

208 C ontent manager Cop ying content 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy . Menu2.jpg 5549.2MB 0.0MB (0)[...]

209 Deleting cont ent 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete. Next, select Delete . • Content under Int[...]

210 S ettings Settings Server Network Settings Default content duration Content ra tio Image Eect Default content Content La yout Schedule Name Safely Remove USB Device Return Close Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model. Ser ver Network Settings T o run MagicInfo Premium S , connect to a network [...]

211 Default content duration Specify the duration to play content. • Image View er Time , Doc viewing time , PPT View er Time , PDF viewing time , F lash viewing time ― The duration must be at least 5 seconds. C ontent Ratio Specify the display aspect ratio by type when playing content. • Image ratio , Doc Ratio , PPT Ratio , PDF Ratio , Vide[...]

212 When C ontent is Running V iewing the details of the conten t that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBX GDSP-0100.18 : Monitor : FF-FF-FF-FF-FF-FF : L ocal schedule : Disconnected : Connected : No Schedule to download - The displayed image may diff er depending on the m[...]

213 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model. Pr ess the TOOLS button on the r emote control. Y ou can change the Picture Mode or Sound Mode s[...]

214 M ag ic I n fo V ideow all S Chapter 13 A licence needs to be purchased to use MagicInf o Videowall S . T o download the soft ware, go to the Samsung homepage at http://www .samsunglfd.com. T o purchase a licence, contact a Customer Ser ver Centre . F ile F ormats C ompatible with M agic I n fo V ideowall S P la yer Read befor e using M agic I [...]

215 V ideo Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correctly , [...]

216 Restrictions • Only one video ( Videos ) file can be pla yed per client. ― Different cont ent files can be played on the displays of a video wall. T wo video ( Videos ) files cannot be play ed on a single display of a video wall. Available Available Not available[...]

217 M agic I n fo V ideowall S MENU m → Support → Contents Home → MagicInfo V ideowall S → ENTER E → RETURN ― T o launch MagicInfo Videowall S , select M agicInfo V ideowall S for the Pla y Mode on the Syste m . ― Pr ess the MagicInfo Lite/S button on the remote contr ol. S ettings Settings Default Storage Default content Content La y[...]

218 When C ontent is Running Information Software Version Device Name Device ID USB Cancel : A-L UBX GDSP-0100.18 : Monitor : FF-FF-FF-FF-FF-FF : Connected - The displayed image may diff er depending on the model. Pr ess the INFO button on the remote control . • Software Version : Displa ys the soft ware version of a device • Device Name : Disp[...]

219 T r oubleshooting Guide Chapter 14 Requirements Bef ore C ontacting S amsung C ustomer Ser vice C entre Before calling Samsung Cust omer Ser vice Centre, t est your product as follows. If the problem persists, contact Samsung Customer Service Centre. T esting the Pr oduc t Check if your product is operating normally by using the product test fu[...]

220 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the scr een [...]

221 Screen issue The screen is not clear . The screen is blurry . Adjust Coarse and F ine . Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky . Check that the resolution and frequency of the PC and graphics card ar e set within a range[...]

222 Screen issue The screen displa y does not look normal. Encoded video content may cause the display to appear corrupted in scenes f eaturing fast moving objects such as in a spor ts event or action video. Low sig nal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone [...]

223 Sound issue There is no sound . Check the connection of the audio cable or adjust the volume. Check the volume. The volume is t oo low . Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programmeme . Video is a vailable but there is no sound. If an HDMI c[...]

224 Sound issue There is audible sound when the v olume is muted. When Speaker Select is set to External , the volume button and mute function are disabled. Adjust the volume f or the external speak ers. Audio settings for main speakers are separat e from the internal speakers on the product. Changing or muting the volume on the product does not af[...]

225 Other issue The product smells like plastic. The plastic smell is normal and disappears over time. The monitor appears tilted . Remove and then attach the stand again to the product. Audio or video cuts out intermitt ently . Check the cable connection and connect it again if required. Using a very hard or thick cable may corrupt audio and video[...]

226 Other issue There is no sound in HDMI mode . Displayed picture colours may not look normal. Video or sound may not be available. This can occur if a source device that only supports an older version of the HDMI standard is connected to the product. If these issues occur , connect an audio cable along with the HDMI cable. Some PC graphics cards [...]

227 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol P anel → Appearance and Themes → D isplay → Settings → Advanc ed → Monitor and adjust the frequency in M onitor Settings . • Windows ME/2000: Go to C ontrol Panel → Displa y → Settings → Advanced ?[...]

228 Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Contr ol Panel → Appearanc e and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Control P anel → Display → Screen Saver Settings or BIOS SE TUP on the PC. • Windows Vista: Set po[...]

229 Specications Chapter 15 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name MD32C MD40C Panel Siz e 32 CLASS (31.5 inches / 80 cm) 40 CLASS (40.0 inches / 101 cm) Display area 698.4 mm (H) x 392.85 mm ( V ) / 27.5 inches (H) x 15.5 inches ( V ) 885.6 mm (H) x 498.15 mm ( V ) / 34.9 inches (H) x 19.6 inches ( V ) Dime[...]

230 Display Colour MD32C / MD40C / MD46C: 1.07B(10bits Dithering) MD55C: 16.7M (8Bits Dithering) Synchronization Horizontal Fr equenc y 30~81 kHz V er tical Fr equenc y 56~75Hz Resolution Optimum resolution 1920x1080@60Hz Maximum resolution 1920x1080@60Hz Maximum Pixel C lock 148.5MHz (Analog,Digital) Po wer Supply AC 100 to 240 V AC (+/- 10%), 60 [...]

231 ― Plug-and-Play This monitor can be installed and used with any P lug-and-Play compatible systems. T wo-way data exchange between the monitor and PC system optimiz es the monitor settings. Monitor installation takes place automatically. Ho wever , you can customize the installation settings if desir ed. ― Due to the nature of the manufactur[...]

232 P o werSav er The power-sa ving function of this product reduces power consumption by switching off the screen and changing the colour of the po wer LED if the product is not used for a specified period of time. The power is not turned off in power-saving mode. T o switch the screen back on, press an y key on the k eyboard or move the mouse . P[...]

233 Pr eset T iming M odes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the nature of the panel . Using a resolution other than the specified resolution may degrade the picture quality . T o avoid this, it is recommended that you select the optimum resolution specified f or yo[...]

234 Resolution Horizontal F requency (kHz) V ertical Frequency (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60.02[...]

235 Appendix Chapter 16 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care centre . NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung .com/ca (English) http://www.samsung .com/ca_fr (Fr ench[...]

236 LA TIN AMERICA COL OMBIA 01-8000112112 Bogotá: 6001272 http://www.samsung .com/co COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) ECU ADOR 1-800-10-7267 http://www.samsung .com[...]

237 LA TIN AMERICA PUERTO RIC O 1-800-682-3180 http://www.samsung .com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung .com URUGU A Y 40543733 http://www.samsung .com VENEZUELA 0-800-100-5303 http://www.samsung .com EUROPE A USTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung .com BEL GIUM 02-201-24-18 http://www.samsu[...]

238 EUROPE FINLAND 030-6227 515 http://www.samsung .com FRANCE 01 48 63 00 00 http://www.samsung .com/fr GERMANY 0180 5 SAMSUNG bzw. 0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.) http://www.samsung .com GREECE 80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land line[...]

239 EUROPE ROMANIA 08008 SAMSUNG (08008 726 7864) TOLL FREE No . http://www.samsung .com SERBIA +381 11 321 6899 (old number still active 0700 7267864) http://www.samsung .com SL OV AKIA 0800 - SAMSUNG(0800-726 786) http://www.samsung .com SP AIN 902 - 1 - SAMSUNG (902 172 678) http://www .samsung.com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsu[...]

240 CIS RUSSIA 8-800-555-55-55 http://www.samsung .com T ADJIKIST AN 8-10-800-500-55-500 http://www.samsung .com UKRAINE 0-800-502-000 http://www .samsung.com/ua (Ukrainian) http://www.samsung .com/ua_ru (Russian) UZBEKIST AN 8-10-800-500-55-500 http://www.samsung .com ASIA P ACIFIC A USTRALIA 1300 362 603 http://www.samsung .com CHINA 400-810-5858[...]

241 ASIA P ACIFIC PHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLD T 1-800-3-SAMSUNG(726-7864) for Dig itel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 http://www.samsung .com/ph SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung .com T AIW AN 0800-329-999 0266-026-066 http://www.samsung .com THAILAND 1800-29-3232 02-689-3232 http://www.samsung .[...]

242 MENA OMAN 800-SAMSUNG(726-7864) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) Q ATA R 800-2255 (800-CALL) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) SA UDI ARABIA 9200-21230 http://www.samsung .com/sa (Arabic) SYRIA 18252273 http://www.samsung .com/Levant (English) TURKEY 444 77 11 [...]

243 AFRICA SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung .com T ANZANIA 0685 88 99 00 http://www.samsung .com UGANDA 0800 300 300 http://www.samsung .com ZAMBIA 211350370 http://www.samsung .com[...]

244 Responsibility for the P ay Ser vice ( C ost to C ustomers) ― When the ser vice is requested , in spite of in warranty, we may char ge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ser vice technician gives instruction[...]

245 WEEE C orrect D isposal of This Pr oduc t ( W aste Electrical & Elec tronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessor ies or literature indicates that the pr oduct and its elec tronic accessories (e.g . charger , headset, USB cable) should not be disposed of with other househ[...]

246 Optimum Picture Quality and Afterimage Burn-in Pr even tion Optimum Picture Quality • T o enjoy the optimum picture quality, go to Contr ol Panel on your PC and adjust the r esolution and refresh rate as f ollows. The picture quality of TFT -L CDs may degrade if the optimum resolution is not selected. - Resolution: 1920 x 1080 - Vertical freq[...]

247 Pr even tion of Afterimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally . Normal operation refers t o a continuously changing video pattern. If the L CD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage differ ence may occur be[...]

248 • Avoid combinations of a t ex t colour and background colour of contrasting brightness. ― Avoid using g rey as it may contribute to afterimage burn-in. ― Avoid using colours of contrasting brightness (black and white; g rey). FLIGHT TIME OZ348 20:30 : : FLIGHT TIME OZ348 20:30 : : • Regular T ex t colour Change - Use bright colours of [...]

249 Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a licence from U .S. Patent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DT S, the Symbol, [...]

250 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method. - Scanning Scanning refers to a pr ocess of sending pixels that fo[...]