Samsung MD65C Bedienungsanleitung

LFD DISPLA Y User Manual The colour and the appearance ma y differ depending on the product, and the specifications are subject to change without prior notice to improv e the performance. MD65C BN46-00350C-00[...]

T able of con ten ts Before U sing the P roduct Cop yright 7 Safety Precautions 8 Symbols 8 Cleaning 8 Storage 9 Electricity and S afety 9 Installation 10 Operation 12 Pr eparations Checking the Conten ts 15 Removing the P ackaging 15 Checking the Components 16 Parts 19 Control P anel 19 Reverse Side 21 Assembling the Holder-W ire stand 22 Remote C[...]

T able of con tents Screen Adjustment 75 Advanced f eatures 78 Sound Adjustment 80 System Setup 80 T ool Settings 89 Other Functions 92 Group Management 93 Schedule Management 95 T roubleshooting Guide 97 Screen Adjustmen t Picture Mode 99 If the input source is PC, DVI or DisplayP or t 99 If the input source is AV , Component, HDMI1, HDMI2 99 Back[...]

T able of con tents E co Solution 138 Energy Saving 138 E co Sensor 138 No Signal P o wer O ff 138 A uto P ower Off 138 Security 139 Safety Lock 139 Button Lock 139 Change PIN 139 PIP 140 A uto Protection Time 141 Screen Burn Protection 142 Pix el Shif t 142 Timer 143 Immediate display 144 Side G rey 144 Tick er 145 Video W all 146 Video Wall 146 F[...]

T able of con tents Playing a Video 171 Photos 172 Viewing a Photo (or Slide Sho w) 172 Music 173 Playing Music 173 Videos / Phot os / Music Play Option menu 174 Supported Subtitle and AllShare Play file formats 176 Subtitle 176 Supported image resolutions 176 Supported music file formats 177 Supported Video Formats 177 M agic I nfo L ite File F or[...]

Prev ention of Afterimage Burn-in 265 Licence 267 T erminology 268 T able of con tents 6[...]

7 Befor e Using the P r oduc t Chapter 01 C opyright The contents of this manual are subject to change without notice to impr ove quality. © 2013 Samsung Electronics Samsung Electronics owns the copyright for this manual . Use or reproduction of this manual in parts or entirety without the authorization of Samsung Elec tronics is prohibited . Micr[...]

8 Safety Pr ecautions Caution RISK OF ELEC TRIC SHOCK DO NOT OPEN Caution : TO REDUCE THE RISK OF ELEC TRIC SHOCK , DO NOT REMOVE COVER. (OR BA CK ) THERE ARE NO USER SER VICEABLE P ARTS INSIDE. REFER ALL SER VICING TO QU ALIFIED PERSONNEL. This symbol indicates that high voltage is pr esent inside. It is dangerous to make any k ind of contact with[...]

9 Stor age Due to the characteristics of high-glossy products, using a UV humidifier nearby may create whitecoloured stains on the pr oduct. ― Contact Customer Service Centre if the inside of the product needs cleaning (ser vice fee will be charged). Electricit y and Safety ― The following images ar e for refer ence only . R eal-life situations[...]

10 Caution Do not disconnect the power cord while the product is being used. • The product may become damaged by an electric shock. ! Only use the power cord pr ovided with your product by Samsung. Do not use the power cord with other pr oduc ts. • A fire or electric shock may result. ! Keep the power socket where the power cord is connected un[...]

11 Do not install the product on an unstable or vibrating sur face (insecure shelf , sloped sur face, etc.) • The product may fall and become damaged and/or cause an injury. • Using the product in an area with excess vibration ma y damage the product or cause a fire. ! Do not install the product in a vehicle or a place exposed to dust, moisture[...]

12 Operation W arning There is a high voltage inside the pr oduc t. Never disassemble, repair or modify the product yourself . • A fire or electric shock may result. • Contact Samsung Customer Service Centre for repairs. ! Before mo ving the product, turn off the power switch and disconnect the power cable and all other connected cables. • Da[...]

13 ! Do not use or keep combustible spray or an inflammable substance near the product. • An explosion or fire may r esult. Ensure the vents ar e not blocked by tablecloths or cur tains. • An increased internal temperature ma y cause a fire. 1 00 Do not inser t metallic objects (chopsticks, coins, hairpins, etc) or objects that burn easily (pap[...]

14 ! Rest your eyes for mor e than 5 minutes for ever y 1 hour of product use. • Eye fatigue will be relieved . Do not touch the screen when the product has been turned on for an extended period of time as it will become hot. ! Store small accessories out of the reach of childr en. ! Exercise caution when adjusting the pr oduc t angle or stand he[...]

15 P repar ations Chapter 02 Checking the Cont ents Removing the P ack aging ― The following images ar e for refer ence only . R eal-life situations may diff er from what is shown in the images. 1 2 Remove the black locking device at the bottom of the box. 3 2 1 3 Using the groov es in the box, lif t and remove the t op of the box. 4 Check the co[...]

16 - Contact the vendor where you purchased the product if any components are missing. - The appearance of the components and items sold separately may diff er from the image shown. - A stand is not provided with the product. T o install a stand, you can purchase one separately . Checking the Components Componen ts ― Components may differ in diff[...]

17 Items sold separately - The following items can be pur chased at your nearest retailer . W all-mount Kit Stand RS232C-Stereo cable ( P. 64 ) DVI cable ( P. 46 ) HDMI-DVI cable ( P. 46 ) DP cable ( P. 47 ) HDMI cable ( P. 47 ) Video cable ( P. 51 ) Ster eo cable ( P. 26 ) Component cable ( P. 52 ) RCA stereo cable ( P. 54 ) RCA cable ( P. 51 ) A [...]

18 External sensor K it ( P. 26 ) RS232C(IN) adapter RS232C(OUT ) adapter LAN cable DP-DVI cable (Used to connect a network box) Network Box PIM[...]

19 P ar ts C ontrol P anel ON P anel Key Speaker Remote sensor POWER ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . P anel Key Buttons Description Po wer on the product. If you press the button when the product is turned on, the control menu will be displayed[...]

20 ― If you press the butt on on the panel k ey ( P. 19 ) when the product is turned on, the control menu will be displayed . Con trol menu CONTENT Return Buttons Description So urce Select the connected input source. Move the panel key right to select S ource in the control menu. When the list of input sources is displayed , move the panel key u[...]

21 Reverse Side ― The colour and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality . DP OUT RGB IN RJ45 IR / AMBIENT SENSOR IN RS232C IN RS232C OUT AUDIO OUT USB DP IN HDMI IN 1 DVI IN / MAGICINFO IN RGB / DVI / HDMI / A V / COMPONENT / AUDIO IN HDMI IN 2 COMPONENT IN OUT IR Po r [...]

22 Assembling the Holder- Wir e stand[...]

23 - Remote control button functions may differ for diff erent products. Remote C ontrol ― Using other display devices in the same space as the remote contr ol of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. MENU OFF VOL CH C[...]

24 TOOLS INFO MagicInfo 3D LOCK PC A DVI B HDMI C DP D EXIT RETURN Display information about the current input source. Move to the upper , lower , left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. Manually select a connec ted input source from PC , DVI , HDMI , or DisplayPort . It sets safe loc[...]

25 Adjusting the OSD with the Remote C ontrol Buttons Description 1 Open the OSD menu. 2 Select from Picture , Sound , Network , Syste m or Support in the displayed OSD menu screen. 3 Change settings as desired. 4 F inish setting. 5 Close the onscreen display (OSD) menu . Remote Con trol Reception Range 7m ~ 10m 30˚ 30˚ Use the remote contr ol wi[...]

26 C onnection Using an IR Stereo C able (sold separat ely) T urn off the de vice before connecting the External Sensor Kit. After it is connec ted, turn on the device. Con trolling mor e than one display pr oduct using your r emote control • Connect the IR OUT por t on the product to the IR / AMBIENT SENSOR IN port on the other display product u[...]

27 Befor e I nstalling the Pr oduc t (Installation Guide) 15 ˚ T o prevent injury, this apparatus must be secur ely attached to the floor/wall in accordance with the installation instructions. • Ensure that an authorized installation company installs the wall mount. • Other wise, it may fall and cause personal injur y . • Make sure to instal[...]

28 A B C E Figur e 1.3 Side view D D Figur e 1.2 Side view Installation on an Indented W all ― Contact Samsung Customer Service Centre for further details. Plane view A Minimum 40 mm B Minimum 70 mm C Minimum 50 mm D Minimum 50 mm E Ambient temperature: Under 35 C ― When installing the product on an indented wall, allow at least the space speci[...]

29 Installing the W all Mount 1 Pr eparing before installing W all-Mount T o install a wall-mount from another manufacturer , use the Holder-Ring( 1 ). Installing the W all Mount Kit The wall mount kit (sold separately) allows you to mount the product on the wall. F or detailed information on installing the wall mount, see the instructions provided[...]

30 W all Mount Kit Specications ( VESA) ― Install your wall mount on a solid wall perpendicular to the floor . Before attaching the wall mount to surfaces other than plaster board, please contact your nearest dealer f or additional information. If you install the product on a slanted wall, it may fall and result in sev ere personal injur y . ?[...]

31 Remote C ontrol (RS232C) Cable C onnec tion RS232C Cable Interface RS232C (9 pins) Pin T xD (No.2), RxD (No.3), GND (No .5) Bit rate 9600 bps Data bits 8 bit Parity None Stop bit 1 bit Flow c ontrol None Maximum length 15 m (only shielded type) • Pin assig nment 1 2 3 4 5 6 7 8 9 Pin Signal 1 Detect data carrier 2 Received data 3 T ransmitted [...]

32 • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable 1 5 9 6 -P2- 1 2 3 -P1- -P1- -P1- -P2- -P2- F emale Rx Tx Gnd 2 3 5 --------> <-------- ---------- 3 2 5 Tx Rx Gnd STEREO PL UG (3.5ø) LAN Cable • Pin assig nment 12345678 Pin No Standard C olour Signal 1 Whit e and orange T X+ 2 Orange T X- 3 Whit e and green RX+ 4 Blue NC 5 Whit [...]

33 • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 MDC HUB P1 P1 P2 P2 Signal P1 P2 Signal TX+ 1 <--------> 1 TX+ T X- 2 <--------> 2 T X- RX+ 3 <--------> 3 RX+ R X- 6 <--------> 6 R X- Cross LAN cable (PC to PC) RJ45 P1 P2 Signal P1 P2 Signal TX+ 1 <--------> 3 RX+ T X- 2 <--------> 6 RX- RX+ 3 <[...]

34 C onnection • Connection 1 RS232C IN OUT RS232C IN OUT RS232C IN OUT RS232C IN OUT • Connection 2 RJ45 RJ45 • Connection 3 RS232C OUT RJ45 RS232C IN OUT RS232C IN OUT RS232C IN OUT[...]

35 C ontrol C odes V iewing control stat e (Get c ontrol command) Header Command ID Data length Checksum 0xAA Command type 0 Con trolling (Set contr ol command) Header Command ID Data length Data Checksum 0xAA Command type 1 V alue Command N o. Command type Command V alue range 1 Po wer control 0x11 0~1 2 Volume contr ol 0x12 0~100 3 Input source c[...]

36 P ower con trol • F unc tion A product can be powered on and off using a PC. • Viewing power state ( Get Pow er ON / OFF Status) Header Command ID Data length Checksum 0xAA 0x11 0 • Setting power ON/Off (Set Power ON / OFF) Header Command ID Data length Data Checksum 0xAA 0x11 1 "Power" "Po wer": Power code to be set on[...]

37 Input source c ontrol • F unc tion The input source of a product can be changed using a PC. • Viewing input source state (Get Input Source Status) Header Command ID Data length Checksum 0xAA 0x14 0 • Setting the input source (Set Input Source) Header Command ID Data length Data Checksum 0xAA 0x14 1 "I nput Source" "Input Sou[...]

38 Screen mode contr ol • F unc tion The screen mode of a product can be changed using a PC. Screen mode cannot be controlled when the V ideo Wall function is enabled. ― This control can only be used on models that include a T V. • Viewing screen status (Get Screen Mode Status) Header Command ID Data length Checksum 0xAA 0x18 0 • Setting th[...]

39 PIP On/Off control • F unc tion The PIP mode of a product can be turned on or off using a PC. ― Only available on models that have the PIP function. ― The mode cannot be controlled if V ideo Wall is set to On . ― This function is not available in MagicInfo . • Viewing PIP on/off state (Get the PIP ON / OFF Status) Header Command ID Dat[...]

40 V ideo W all Mode Control • F unc tion Video W all mode can be activated on a product using a PC. This control is only available on a pr oduc t whose Video W all is enabled. • Viewing video wall mode (Get Video W all Mode) Header Command ID Data length Checksum 0xAA 0x5C 0 • Setting the video wall (Set V ideo W all M ode) Header Command ID[...]

41 V ideo W all On • F unc tion T urn Video Wall on or off on the pr oduc t from your computer . • Get Video W all On/Off Status Header Command ID Data length Checksum 0xAA 0x84 0 • Set Video W all On/Off Header Command ID Data length Data Checksum 0xAA 0x84 1 V .Wall_On • V .Wall_On: Video Wall code to be assigned to the pr oduc t 1: Video[...]

42 10x10 V ideo W all M odel 123456789 10 11 12 13 14 15 O 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 1 0x11 0x12 0x13 0x14 0x15 0x16 0x17 0x18 0x19 0x1A 0x1B 0x1C 0x1D 0x1E 0x1F 2 0x21 0x22 0x23 0x24 0x25 0x26 0x27 0x28 0x29 0x2A 0x2B 0x2C 0x2D 0x2E 0x2F 3 0x31 0x32 0x33 0x34 0x35 0x36 0x37 0x38 0x39 0x3A 0x3B 0x[...]

43 W all_SNo: Pr oduc t Number code assigned to the product 10x10 Video W all Model : ( 1 ~ 100) Set Number Data 1 0x01 2 0x02 ... ... 99 0x63 100 0x64 • Ack Header C ommand ID Data length Ack/Nak r- CMD Val1 Val2 Checksum 0xAA 0xFF 4 'A' 0x89 Wall_Div W all_SNo • Nak Header Command ID Data length A ck/Nak r-CMD V al1 Checksum 0xAA 0x[...]

44 C onnec ting and Using a Sourc e Device Chapter 03 Befor e Connecting Check the following bef ore you connect this product with other devices. Devices that can be connec ted to this product include PCs, camcorders , speak ers, set top box es and DVD/Blu-ray Disc players. Pr e - connection Check points ― Before connecting a source device , read[...]

45 C onnec ting to a PC • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • A PC can be connected to the product in a variety of ways. Select a connection method suitable for your PC. ― Connecting par ts may differ in diff erent products. C onnecti[...]

46 C onnection using a DVI cable (Digital t ype) DVI IN / MA GICINFO IN RGB / DVI / HDMI / A V / COMPONENT / A UDIO IN C onnection Using an HDMI-DVI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name to DVI PC to access video and audio content stored on the PC. HDMI IN 1, HDMI IN 2 RGB / DVI / HDMI / A V / COMPONE[...]

47 C onnection Using an HDMI Cable HDMI IN 1, HDMI IN 2 C onnection Using an DP Cable • Pr ecautions for using DP ― T o increase the standby po wer capacity , the product stops DP communication when it is turned off or in power-saving mode . If the product in dual monitor mode is turned off or goes into power-sa ving mode, monitor setting chang[...]

48 Changing the Resolution ― Adjust the resolution and r efresh rate in Control P anel on your PC to obtain optimum picture quality. ― The picture quality of TFT-L CDs may degrade if the optimum r esolution is not selected. Changing the Resolution on W indow s XP Go to Contr ol Panel Display Settings , and change the resolution. Changing the Re[...]

49 Changing the Resolution on W indow s 7 Go to Contr ol Panel Display Screen Resolution , and change the resolution. Changing the Resolution on W indow s 8 Go to Settings Control Panel Display Screen Resolution , and change the resolution.[...]

50 C onnec ting an Ex ternal Monitor ― Connecting par ts may differ in diff erent products. DP OUT DP IN[...]

51 C onnec ting to a V ideo Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first bef ore connecting the power cable. • Y ou can connect a video device to the product using a cable. ― Connecting par ts may differ in diff erent products. ― Pr ess the SOURCE button on the remote c[...]

52 C onnection Using the component C able A V IN / COMPONENT IN RGB / DVI / HDMI / A V / COMPONENT / AUDIO IN C onnection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. T o resolve this, additionally connect an audio cable to the audio ports on the product and video de vi[...]

53 C onnection Using an HDMI Cable Using an HDMI cable or HDMI to DVI C able (up to 1080p) • F or better pic ture and audio quality , connec t to a digital device using an HDMI cable. • An HDMI cable supports digital video and audio signals, and does not require an audio cable . - T o connect the product to a digital device that does not suppor[...]

54 C onnec ting to an Audio S ystem ― Connecting par ts may differ in diff erent products. A UDIO OUT[...]

55 C onnec ting the net work bo x (Sold separat ely) ― F or details on how to connect to a net work box, ref er to the user's manual provided with the network box upon purchase. MagicInfo T o use MagicInfo , a network box (sold separately) must be connected to the product. ― T o change the MagicInfo settings, run "Magicinf oSetupWizar[...]

56 MagicInfo Setup Wizard - v .1.12 Select TCP/IP - step 2 Obtain an IP address automatically Use the following IP address: IP address: Subnet mask: Default gateway: 192 . 168 . 0 . 102 255 . 255 . 255 . 0 192 . 168 . 0 . 1 Obtain DNS server address automatically Use the following DNS server address: Preferred DNS server: Alternate DNS server: 10 .[...]

57 MagicInfo Setup Wizard - v .1.12 Select Screen T ype - step 4 Landscape Portrait < Back(B) Next(N) > Finish Cancel 6 Select a display mode. MagicInfo Setup Wizard - v .1.12 Setup Information 1. Application : MagicInfo Pro [LAN,WAN based version 2. Internet Protocol [TCP/IP] IP : 192.168.0.102 3. Language : English 4. Screen T ype : Landsc[...]

58 P lug In M odule T o use Plug In Module , make sure you connect a Samsung PIM (sold separately). T o connect a device made by another manufacturer , ensure the device is compatible with Open Pluggable Specification (OPS) standards. ― F or details on how to connect a de vice, ref er to the user manual provided with the PIM upon purchase. ― F [...]

59 Changing the Input sourc e S ou rce MENU m → Support → Contents Home → Source → ENTER E Source HDMI1 HDMI2 DisplayPort PC DVI Intel® WiDi PC PC --- --- --- AV Component --- --- T ools Return - The displayed image may diff er depending on the model. Sou rce allows you to select a variety of sources and change source device names. Y ou ca[...]

60 W iD i Connection 1 F rom the Source screen, select Intel® WiDi . 2 On your desktop , launch I ntel ® WiDi ( ). ― As soon as the programme starts, it searches f or available adapters. 3 Select the correct adapter for the programme and pr ess "Connect" . ― If the adapter of your choice is not found, pr ess "Search for availab[...]

61 U sing MDC Chapter 04 C onguring S ettings for M ulti C ontr ol MENU m → Syste m → Multi Control → ENTER E Assign an individual ID to y our product. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess ▲ / ▼ to selec t a number , and press E . • ID Input Enter the ID number of the pro[...]

62 • DisplayP or t daisy chain T o display the DP IN video input through the DP OUT output por t, selec t a device connection method from Single Stream Transport (SST ) and Multi Stream T ranspor t (MST ). Clone : In this Single Stream Transport (SST ) output mode, the same screen output is displayed on two display devices connected. ― If Clone[...]

63 MDC Pr ogramme Installation/Uninstalla tion Installation 1 Inser t the installation CD into the CD-R OM drive. 2 Click the MDC Unified installation programme . 3 Select a language for installation. Next, click " OK ". 4 When the " W elcome to the InstallShield W izard for MDC_Unified " screen appears , click " N ext &quo[...]

64 Wha t is MDC? Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. C onnecting to MDC Using MDC via RS-232C (serial data communica tions standards) An RS-232C serial cable must be connected to the serial por ts on the PC and monitor . RS232C IN / OUT Moni[...]

65 Using MDC via Ethernet Enter the IP for the primary display device and connect the de vice to the PC. One display device can connect to another using an RS-232C serial cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 por t on the product and the LAN por ts on the HUB. RJ45 HUB Monitor 1 Monitor 2 C[...]

66 Connection using a cross LAN cable ― Multiple products can be connected using the RS232C IN / OUT por t on the product. RS232C OUT RJ45 Monitor 1 Monitor 2 Computer[...]

67 C onnection M anagement Connection management includes the Connection list and Connection list modification options. Connection list - Connection list shows the details of the connections such as connection setting (IP/COM, Port No, MA C, and Connection T ype), connection status, Set ID Range , and detected devices. Each connection can contain a[...]

68 U ser L ogin Launching the programme displays the user log in window. The initial login ID ( passwor d : admin ) and password ( Auto Log in : admin ) are set to admin . ― After logging in for the first time , mak e sure to change the passwor d to ensure security . ― T o change the password , go to Home > User Settings . After you are logg[...]

69 A u to S et ID Auto Set ID f eature assigns a Set ID f or all the LFDs connected in daisy-chain of a selec ted connection. There can be a maximum of 100 LFDs in a connection. The Set ID is assigned sequentially in the daisychain running from 1 t o 99, and then finally to Set ID 0. ― ID for the last 100th LFD is set to 0.[...]

70 Cloning Using the Cloning featur e, you can copy the setting of one LFD and apply it t o multiple selected LFDs. Y ou can select specific tab categories or all tab categories for cloning, using the copy setting option window . ― T o delete the settings you hav e configured, click the Paste Settings button.[...]

71 C ommand Retr y This featur e is used to specify the maximum number of times the MDC command will be retried in case of there being no r eply or a cor rupted reply from an LFD . The retry count value can be set using the MDC options window. The retry count value must be between 1-10. The default value is 1.[...]

72 Getting Star ted with MDC 1 T o start the programme, click Start → Programs → Samsung → MDC Unified . The login window appears after the MDC prog ramme is launched. Enter the user ID and password . • The default user ID and password ar e admin . • Make sure to change the password after the first login. 2 Click Add to add a display devi[...]

73 Main Screen Lay out 4 3 2 1 6 5 1 Menu Bar Change the status of a display device or the properties of the programme. 2 Device Cat egor y View a list of connected display devices or device groups . 3 Schedule Category View a list of schedules for display devices . 4 Set List Select the display device you want to adjust. 5 Modify the Set List Add,[...]

74 V olume 1 2 3 ― The volume can be changed or the sound can be muted only f or displays that are turned on. V olume • Adjust the volume of a selected display . • The volume can be adjusted using the slider bar in the range of 0 to 100. Mute • Enable or disable Mute for a selected display . Mute will automatically be disabled if V olume is[...]

75 User L ogin User Settings • Add, delete or edit log in information. Logout • Log out fr om the current user account as follows . • Click Logout . The message " Do you want t o log admin out? " is displayed • Click Ye s . The user login window appears. • If you do not want to log in, click Close . The programme is closed. ― [...]

76 Color - Color and T int (G/R) ar e not available if the input source is PC . - C olor , T int ( G/R) , C olor T one and C olor T emp . ar e not available if both PC S ource and V ideo S ource are selected. Color • Adjust the colours for the selected display device . Tint ( G/R) • Adjust the tint for the selected display device . Color T one [...]

77 MPEG Noise Filt er Reduces MPEG noise to provide impr oved picture quality . • Off / Low / M edium / High / Aut o Smart LED Controls the LED backlight to maximize picture clarity. Cinema Black In Movie mode, this feature dims the top and bott om areas of the video image to pr ovide a more immersive viewing experience. • Off : T urns off the [...]

78 Adv anced featur es 3D Con trol 3D M ode Select the 3D input format. 3D L/ R C hange Swap the left and right pictures. 3D → 2D Displays the image for the left eye only . 3D A uto V iew If you set 3D Auto V iew to Message Notice , a pop up message window appears when the product receives a 3D sig nal. 3D O ptimiza tion The overall adjustment of[...]

79 Advanc ed Settings D ynamic C ontrast Adjust the screen contrast. G amma C ontrol Adjust the primary colour intensit y . RGB O nly M ode Displays the Red , Green and Blue colour for making fine adjustments to the hue and saturation. F lesh T one Emphasize pink “Flesh T one. ” M otion L ighting Reduces power consumption by reducing scr een br[...]

80 Sound Adjustment - The Bass or T reble item will be disabled if the item is not supported by the selected set. Y ou can change the sound settings. Choose display devices from the list of sets, and select the Sound tab. B ass • Adjust the bass for the selected display . T reble • Adjust the treble f or the selec ted display . B alance (L/ R) [...]

81 F ormat • Select the format to display the split screen. Full Natural H • Select the number of horizontal display devices. • A maximum of 15 displays can be arranged in a row . ― A maximum of 6 can be assigned to V if 15 is assigned t o H . V • Select the number of ver tical display devices. • A maximum of 15 displays can be arranged[...]

82 General User A uto Color • Automatically adjust the screen colours . ― Available only in PC mode. Auto P ower • Set the product to automatically power on. Standby C ontrol • Set the standby mode to activate if an input source is not detected. F an & T emperature Configure the settings r equired to detect the fan speed and internal te[...]

83 Security Safety Lock • Lock the on-scr een menus. ― T o unlock the menus, set Safety Lock to Off . Button Lock • Lock the buttons on the displa y device. ― T o unlock the buttons, set Butt on Lock to Off . OSD Display Source OSD • Select whether to display a message when the So urce is changed. Not Optimum Mode OSD • Select whether t[...]

84 Time C lock S et Change the current time on the selected display device according to the time set on a PC. If the time is not set on the display device, null values will be displayed. Timer O n T imer • Repeat : Specify the period for which you want to r epeat the selec ted Timer . Once , EveryDay , Mon~Fri , Mon~Sat , Sat~Sun , Manual • Hol[...]

85 Holiday Management Holiday Management allows you t o prevent devices that are set t o be powered on b y the Timer fr om turning on at a specified date. ― The Holiday Management function can be enabled or disabled in the Timer settings menu . • Add : Y ou can specify holidays. Click the Add button in the Holiday Management window . • Delete[...]

86 S creen S aver ― Period (Hour) and T ime (Sec) can be configured when Repeat is selected. ― Start Time and End Time can be configur ed when Inter val is selected. This function prevents screen burn-in when the screen of the selected display device is left idle for an extended period of time. Timer : Y ou can set the timer for Screen Sa ver .[...]

87 S afety S creen The Saf ety Screen function can be used to prevent screen burn-in when a stationary image displays on the screen of a display device for an extended period of time. L amp C ontrol Lamp Control is used t o adjust the back light to reduce power consumption. Automatically adjust the backlight of the selected display device at a spec[...]

88 Tick er I nput text while a video or image is displayed and display the text on the screen. Ticker Enable or disable Ticker . • Off / On Message Enter a message to display on the scr een. Timer Set the Start Time and End Time to display a message ( Message ). Position Select an orientation to display a message ( Message ) from Horizontal and V[...]

89 T ool Settings Security • Panel C ontrol : Turn on or off the screen of a display device . • Remote Contr ol : Enable or disable the remote control. Reset • Reset Picture : Reset the screen settings. • Reset Sound : Reset the sound settings. • Reset System : Reset the syst em settings. • Reset All : Reset the screen, sound and system[...]

90 Edit C olumn O ptions Configure the settings f or the items that will be displayed on the list of displays. • Language : Select a language to use in the MDC programme. After selecting a language, r estart the MDC programme to use the selected language. • Command Retry Count : Specify the number of retry attempts when a command fails. • Err[...]

91 M onitor W indow A window appears showing details for data transfer between the computer and displa y de vices. • Filt er View the programme inf ormation. I nformation[...]

92 Other F unctions Resizing a Window Place the mouse pointer on a corner of the programme windo w. An arrow will appear . Move the arrow to customiz e the size of the programme window .[...]

93 Group Management Creating Gr oups Create gr oups and manage the list of sets on a group basis. ― Duplicate group names cannot be used . 1 Right-click and selec t Group Edit in the display device list section on the lef t side of the programme window . - The Add on the same lev el button is enabled only if at least one group is cr eated. 2 In t[...]

94 • Add on the sub lev el : Create a sub-group under the selected group . 3 Enter the group name . Deleting Groups 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Delet e . 3 Click Ye s . The group will be deleted.[...]

95 Renaming Groups Rename 1 Select a group name, and click Edit . 2 In the Edit Group window displayed, click Rename . 3 If a cursor appears in the old group name, enter a new gr oup name. Schedule Management Creating Schedules Create and r egister a schedule on a gr oup basis. 1 Click All Schedule List in the schedule section on the left side of t[...]

96 2 Click the Add button. The Add Schedule window will appear . 3 Click Add below the Device Group item, and select the group you want to add a schedule t o. 4 Select Date&Time / Action and click OK . The schedule will be added and a list of schedules will appear in the set list window . - Device Group : Select a group . - Date&T ime Insta[...]

97 T roubleshooting Guide - This programme may malfunction sometimes due to a communication problem between the PC and display or electromagnetic waves emitted fr om nearby electronic devices. Issue Solution The display y ou want to control does not appear on the system inf ormation chart. 1 Check the connection of the RS232C cable (check that the [...]

98 How display pr oper ties are shown when multiple display s are used 1 When no display is selected: The default value is displayed. 2 When one display is selected: Settings for the selected display are displa yed. 3 When two displays are selected (e.g . in sequence of ID 1 and ID 3): The settings f or ID 1 are displayed befor e the settings for I[...]

99 Screen A djustment Configure the Picture settings ( Backlight , Colour T one , etc.). - The layout of the Picture menu options may vary depending on the product. Chapter 05 P ic ture M ode MENU m → Picture → Picture Mode → ENTER E Select a picture mode ( Picture Mode ) suitable for the environment wher e the product will be used. Different[...]

100 B acklight / C ontrast / B rightness / S harpness / C olour / T int ( G/ R) MENU m → Picture → ENTER E · · · · · · Picture Picture Mode Backlight Contrast Brightness Sharpness Colour Tint ( G/R) Information 60 70 45 50 50 G 50 R 50 - The displayed image may diff er depending on the model. Y our product has several options for adjustin[...]

101 S cr een A djustment MENU m → Picture → Screen Adjustment → ENTER E · · Screen Adjustmen t Picture Size Custom 16:9 Zoom/P osition 4:3 Screen Size PC Screen Adjustment Resolution Selec t O - The displayed image may diff er depending on the model. choose size and aspect ratio picture displayed on screen. P icture S ize ― Different S[...]

102 Picture Sizes a vailable by Input Source. Input Source Picture Size AV , C o mponent (480i, 480p) 16:9 , Zoom1 , Zoom2 , 4:3 , C ustom C o mponent (1080i, 1080p) 16:9 , Wide F it , Screen Fit , 4:3 , Custom HDMI 1 , HDMI 2 (720p , 1080i, 1080p) 16:9 , Smart View 1 , Smart View 2 , Wide F it , 4:3 , S creen F it , Custom HDMI 1 , HDMI 2 (480i, 4[...]

103 P osition · · Screen Adjustmen t Picture Size P osition PC Screen Adjustment Resolution Selec t Zoom1 16:9 O 4:3 Screen Size - The displayed image may diff er depending on the model. Adjusts the picture position. P osition is only available if Picture Size is set to Zoom1 , Z oom2 , Wide Fit , Screen F it or Custom . ― T o use the P osit[...]

104 4:3 S creen S i ze · · Screen Adjustmen t Picture Size Zoom/P osition PC Screen Adjustment 4:3 Screen Size Resolution Selec t Custom 16:9 O - Available in PC mode only . - The displayed image may diff er depending on the model. Available only when picture size is set t o Auto W ide . Y ou can determine the desired picture size at the 4:3 W[...]

105 R esolution S elect · · Screen Adjustmen t Picture Size Zoom/P osition PC Screen Adjustment Resolution Selec t Custom 16:9 O 4:3 Screen Size - Available in PC mode only . - The displayed image may diff er depending on the model. If the picture is not normal even when the resolution of the graphics card is one of the follo wing, you can opt[...]

106 R ota tion MENU m → Picture → Rotation → ENTER E · Picture Rotation Aspect Ratio P ortrait F ull Screen - The displayed image may diff er depending on the model. Rotate the product screen orientation. • Landscape : Display the screen in landscape mode (default). • Portrait : Display the scr een in portrait mode. A spec t R a tio MENU[...]

107 A dvanced S ettings MENU m → Picture → Advanc ed S ettings → ENTER E Advanc ed S ettings Dynamic Contrast Black T one Flesh T one RGB Only Mode Colour Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model. Input Source Picture Mode Advanc ed S ettings PC , DVI , Displ[...]

108 Advanc ed S ettings Dynamic Contrast Black T one Flesh T one RGB Only Mode Colour Space White Balance 10p White Balance Medium O 0 O Native O - The displayed image may diff er depending on the model. D ynamic C ontrast Adjust the screen contrast. • Off / Low / M edium / High B lack T one Select the black level to adjust the screen de[...]

109 Advanc ed S ettings White Balance 10p White Balance Gamma Exper t P attern Motion Lighting O 0 O O - The displayed image may diff er depending on the model. W hit e B alance Adjust the colour temperature f or a more natural picture. • R-Offset / G- Offset / B- Offset : Adjust each colour ’ s (red, gr een, blue) dar kness. • R-Gai[...]

110 Advanc ed S ettings White Balance 10p White Balance Gamma Exper t P attern Motion Lighting O 0 O O - The displayed image may diff er depending on the model. E xper t P attern Use the Expert Pattern function to calibrate the picture. If the OSD menu disappears or a menu other than the Picture menu is opened, the product saves the calibr[...]

111 P ic ture O ptions MENU m → Picture → Picture Options → ENTER E Picture Options Colour T one Colour T emp . Digital Noise F ilter MPEG Noise F ilter HDMI Black Lev el F ilm M ode Motion Plus Standard 10000K O O Normal O O - The displayed image may diff er depending on the model. Select an option using the ▲ and ▼ arrow key[...]

112 Picture Options Colour T one Colour T emp . Digital Noise F ilter MPEG Noise F ilter Standard 10000K O O - The displayed image may diff er depending on the model. C olour T one If the input source is PC , DVI , DisplayPort or HDMI1 (PC connection), HDMI2 (PC connection). • Off / Cool / Standard / W arm If the input source is AV , Compon[...]

113 Picture Options HDMI Black Lev el F ilm M ode Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model. HDMI B lack L eve l Selects the black level on the screen to adjust the screen depth. • Normal / Low ― Available only in HDMI1 , HDMI2 and DVI mode (A V Timing : 480p, 576p , 720p, 1080[...]

114 Picture Options HDMI Black Lev el F ilm M ode Motion Plus Dynamic Back light Normal O O O - The displayed image may diff er depending on the model. D ynamic B acklight Automatically adjust the backlight to provide the best possible screen contrast under the curr ent conditions. • Off / On ― The Dynamic Backlight is not available wh[...]

115 Sound Adjustmen t Configure the sound ( Sound ) settings for the pr oduc t. Chapter 06 S ound M ode MENU m → Sound → Sound Mode → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Y ou can select a sound mode to suit your personal prefer ences. • Standa[...]

116 S ound E ec t MENU m → Sound → Sound Effect → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Configure your pr eferred sound effect for output sound. ― If Speaker Selec t is set to External , Sound Effect is disabled. ― Available only when Sound[...]

117 S peak er S ettings MENU m → Sound → Speaker Settings → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. • Speaker Select ( External / Internal ) If you are listening to the sound track of a broadcast or mo vie through an ex ternal receiver , you may h[...]

118 R eset S ound MENU m → Sound → Reset Sound → ENTER E Sound Sound Mode Sound Eect Speaker Settings Reset Sound Standard - The displayed image may diff er depending on the model. Reset all sound settings to the factor y defaults.[...]

119 N et work Chapter 07 C onnecting to a W ired Netw ork There are thr ee ways to attach your product to your LAN using cable. • Y ou can attach your product to your LAN by connecting the LAN port on the back of your product to an external modem using a LAN cable. See the diagram below . RJ45 The Modem Port on the W all Exter nal Modem (ADSL / V[...]

120 • Depending on how your network is configured, you ma y be able to attach your product to your LAN b y connec ting the LAN por t on the back of your product directly to a network wall outlet using a LAN cable. See the diagram below . Note that the wall outlet is attached to a modem or router elsewhere in your house . The LAN Port on the W all[...]

121 W ired Network Settings Set the network connec tion to use Internet ser vices such as per form software upgrades. Aut omatic Network Settings Connect to the network using a LAN cable. Make sure a LAN cable is connected first. How to set up automa tically 1 Go to the Network Settings screen. Select Start , press E , and then press E again. 2 The[...]

122 Manual Network Settings Offices may use static IP addresses. If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually . Getting the Network Connection V alues T o view the Network connection values on most Windo ws computers, f ollow these steps. 1 Right clic[...]

123 C onnecting to a W ireless Netw ork T o connect your product to your network wireless, y ou need a wireless router or modem and a Samsung Wireless LAN adapter ( WIS10ABGN, WIS12ABGNX) , which you connect to your product back or side panel USB port. S ee the illustration below . The LAN Port on the Wall Wireless IP shar er (router having DHCP se[...]

124 W ireless Network Setting Aut omatic Network Setup Most wireless networks have an optional security system that requires devices that access the network to transmit an encrypted securit y code called an Access or Security Key . The S ecurity Key is based on a P ass Phrase, typically a word or a series of letters and numbers of a specified lengt[...]

125 Manual Network Setup Offices may use static IP addresses. If this is the case, ask the network administrator for the IP address, subnet mask, gateway and DNS server address. Enter these values manually . Getting the Network Connection V alues T o view the Network connection values on most Windo ws computers, f ollow these steps. 1 Right click t[...]

126 How to set up manually 1 Go to the Network Settings screen. Select Start , press E . 2 The Network function searches for a vailable wireless networ ks. When done, it displays a list of the available networks. 3 In the list of networks, press the or button to select a network, and then press the E button twice. ― If the wireless router is set [...]

127 WPS ( PBC ) How to set up using WPS(PBC ) If your router has a WPS(PBC) button, follow these st eps. 1 Go to Network Settings screen. 2 Select WPS(PBC ) , press E , and then press E again. 3 Pr ess the WPS(PBC ) button on your router within 2 minutes . Y our product automatically acquires all the network setting values it needs and connects to [...]

128 N etw ork S tatus MENU m → Network → Network Status → ENTER E Network Status Y our wireless network and Internet connection are setup and ready to use. Y ou are connected to the Internet. If you have any problems using online services, please contact your Internet service provider . Close Retry IP Settings MAC Address IP Address Subnet Ma[...]

129 W i -F i D ir ec t MENU m → Network → W i-Fi Dir ect → ENTER E Set to connect the product to wireless mobile devices. Using this function, you can connect wireless mobile devices with your product directly without a rout er . - T o use this function, your mobile device should be supported by the Wi-Fi Direct . T o connect your mobile devi[...]

130 S oft AP MENU m → Network → Soft AP → ENTER E Using this function, you can connect the product on your mobile devices if your mobile devices do not suppor t Wi-F i Direc t . Set the options for connection of Wi-Fi device. • Soft AP T urns on or off the S oft AP . When Sof t AP is set to On , your mobile devices can find the product name[...]

131 A ll S hare S ettings MENU m → Network → AllShare Settings → ENTER E Shows a list of mobile phones or connected devices which have been set up to use the AllShar e Play function with this product. • Allow / Den y : Allows/Blocks the devices. • Delete from the list : Deletes the devices from the list. ― This function only deletes the[...]

132 S y stem Chapter 08 M ulti C ontrol MENU m → Syste m → Multi Control → ENTER E Multi Contr ol ID Setup ID Input MDC Connection DisplayP or t daisy chain 00 -- RS232C MDC Clone - The displayed image may diff er depending on the model. C onguring settings for M ulti C ontrol • ID Setup Assign an ID to a set. (Range: 0~99) Pr ess ▲ or[...]

133 T ime MENU m → Syste m → Time → ENTER E 끄기 Time Clock Set Sleep Timer On Timer O Timer Holiday Management O - The displayed image may diff er depending on the model. Y ou can configure Clock Set or Sleep Timer . Y ou can also set the product to automatically turn on or off at a specified time using the Timer function. C lock S e[...]

134 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. On T imer Set On Timer so that your pr oduct turns on automatically at a time and on a day of your choosing. The power is turned on with the specified volume or input source . On Timer : Set the on timer by making a selection from one of the se[...]

135 Time On Timer O Timer Holiday Management - The displayed image may diff er depending on the model. O T imer Set the off timer ( Off Timer ) by making a selec tion from one of the seven options. ( Off T imer1 ~ O ff Timer7 ) ― Y ou must set the clock before y ou can use Off Timer . • Setup : Select O ff , Once , Ever yday , Mon~Fri , M[...]

136 M enu L anguage MENU m → Syste m → Menu Language → ENTER E Time Menu Language Rotate menu Eco Solution English Landscape System - The displayed image may diff er depending on the model. Set the menu language. ― A change to the language setting will only be applied to the onscreen menu displa y . I t will not be applied to other function[...]

137 R otate menu MENU m → Syste m → Rotate menu → ENTER E System Time Menu Language Rotate menu Eco Solution English Landscape - The displayed image may diff er depending on the model. Configure the menu scr een. • Landscape : Display the menu in landscape mode (default). • Portrait : Display the menu in portrait mode on the right side of[...]

138 E co S olution MENU m → Syste m → Eco Solution → ENTER E Eco Solution Energy Saving Eco Sensor No Signal P ower O Auto P ower O O O O O - The displayed image may diff er depending on the model. E nergy S aving Reduce the power consumption by adjusting the screen brightness. Selecting Picture Off switches off the screen. [...]

139 S ecurity MENU m → Syste m → Security → ENTER E Securit y Safety Lock Button Lock Change PIN O O - The displayed image may diff er depending on the model. Every time you access the Security func tions, the PIN screen will appear and the default PIN number is "0-0-0-0" (default password: 0 - 0 - 0 - 0). S afety L ock It set[...]

140 PIP MENU m → Syste m → PIP → ENTER E System PIP Auto Pr otec tion Time Screen Burn Pr otec tion Ticker Video W all O O O - The displayed image may diff er depending on the model. - F or PIP sound, r efer to the S ound S elect instructions. - If you turn the product off while watching in the PIP mode, PIP mode will remain after po[...]

141 A uto P r otection T ime MENU m → Syste m → Auto Protection Time → ENTER E System Auto Pr otec tion Time Screen Burn Pr otec tion Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model. If the screen displays a still image for a certain period of time you define, the product activ[...]

142 S cr een B urn P rot ec tion MENU m → Syste m → Screen Burn Protection → ENTER E Screen Burn Pr otec tion Pix el Shif t Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. T o reduce the possibility of screen burn, this unit is equipped with Pix el Shift screen burn prevention te[...]

143 Screen Burn Pr otec tion Pix el Shif t Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. T imer Y ou can set the timer for Screen Burn Pr otec tion . The Pix el Shif t feature stops aut omatically af ter a specified period of time. Timer • Off • Repeat : Display the image retenti[...]

144 Screen Burn Pr otec tion Pix el Shif t Timer Immediate display Side Grey O O O O - The displayed image may diff er depending on the model. I mmediate display Select the screen saver you want to display immediat ely. • Off / Pixel / Rolling bar / F ading screen S ide G rey When the screen is set to 4:3 aspect ratio, adjust the brig[...]

145 T icker MENU m → Syste m → Ticker → ENTER E System Auto Pr otec tion Time Screen Burn Pr otec tion Ticker Video W all Source A utoSwitch Settings O O - The displayed image may diff er depending on the model. Input text while a video or image is displayed and display the text on the screen. • Off / On ― Message , Time , P osition[...]

146 V ideo W all MENU m → Syste m → Video W all → ENTER E · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. - The V ideo W all option is only enabled when PIP is set t o O . - If more than four displays are connected horizontally and v e[...]

147 · · · · Video W all Video W all F ormat Horizontal V er tical Screen P osition On F ull 1 1 - The displayed image may diff er depending on the model. V er tical This function automatically divides the screen according to the specified number of v er tical displays. Enter the number of vertically arranged displays. The vertical screen will a[...]

148 S ou rce A uto S witch S ettings MENU m → Syste m → Source AutoS witch Settings → ENTER E · · · Source A utoSwitch Settings Primary Source Recovery Primary Source Secondar y Source Source Aut oSwitch On O All PC - The displayed image may diff er depending on the model. T urning on the display with Source AutoSwit ch On , and the pre[...]

149 G ener al MENU m → Syste m → General → ENTER E General Max. Po wer Saving Game Mode BD Wise Menu T ransparency Sound F eedback Auto P ower Standby Con trol On O On Medium Low O Auto - The displayed image may diff er depending on the model. M ax. P ower S aving T urns off the product to reduce power consumption after the PC has been [...]

150 General Sound F eedback Auto P ower Standby Con trol Lamp Schedule OSD Display P ower On A djustment T emperature Con trol Low O Auto O 0 Sec 77 - The displayed image may diff er depending on the model. S ound F eedback Y our product gives sound feedback when y ou use product. Sound Feedback is enabled by default. T urn off Sound Feedback[...]

151 General Sound F eedback Auto P ower Standby Con trol Lamp Schedule OSD Display P ower On A djustment T emperature Con trol Low O Auto O 0 Sec 77 - The displayed image may diff er depending on the model. L amp S chedule Enables the lamp value to be adjusted to a user-specified value at a specified time in MDC mode . • Off / On OSD D ispl[...]

152 A nynet + (HDMI - CEC ) MENU m → Syste m → Anynet+ (HDMI-CEC) → ENTER E Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O  Receiver On Ye s O - The displayed image may diff er depending on the model. - The A nynet + functions do not operate with other manufacturers’ products. - F or instructions explaining how to connect Anynet+ [...]

153 Anynet+ (HDMI-CEC) Anynet+ (HDMI-CEC) Auto T urn O  Receiver On Ye s O - The displayed image may diff er depending on the model. A u to T urn O Setting an Anynet+ Device to turn Off automatically when the product is turned off. • No / Ye s ― If Auto T urn Off is set to Ye s , running ex ternal devices will turn off at the same time[...]

154 T roubleshooting for A nynet+ Pr oblem P ossible S olution Anynet+ does not w ork . • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only . • Check if the Anynet+ device power cor d is properly connected. • Check the Anynet+ device ’ s Video/Audio/HDMI cable connections. • Check whether Anynet+ ([...]

155 Pr oblem P ossible S olution The connected device is not displayed . • Check whether or not the device suppor ts Anynet+ functions. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to On in the Anynet+ Setup menu . • Search Anynet+ devices again. • Anynet+ requir es an HDMI connec [...]

156 D iv X ® V ideo O n D emand MENU m → Syste m → DivX® V ideo On Demand → ENTER E System DivX® Video On Demand - The displayed image may diff er depending on the model. Shows the registration code authorized f or the product. If you connect to the DivX Ⓡ web site and register using that code , you can download the VOD r egistration fil[...]

157 Export the product settings to a USB device or load the settings via a USB de vice. This option is useful when assigning the same settings to several pr oduc ts. • Clone to USB : Copy the pr oduc t settings to a USB device. • Clone Fr om USB : Assign the settings saved in a USB device to the product. - After configuration is complete, the p[...]

158 R eset A ll MENU m → Syste m → Reset All → ENTER E System Reset All - The displayed image may diff er depending on the model. This option returns all the current settings for a displa y to the default fac tory settings. PC module pow er MENU m → Syste m → PC module power → ENTER E System PC module power - The displayed image may dif[...]

159 S uppor t Chapter 09 S oft ware U pdate MENU m → Support → S oftware Update → ENTER E The Software Update menu lets you upgrade your pr oduc t software to the latest version. ― Be careful not to turn off the power until the upgrade is complet e. T he product will turn off and on automatically after completing the software upgrade. ― W[...]

160 C ontact S amsung MENU m → Support → Contact Samsung → ENTER E View this information when your pr oduc t does not work properly or when you want to upgrade the software. Y ou can find information regarding our call C entres and how to download products and software. ― Contact Samsung and find the product Model Code and Software V ersion[...]

161 C onten ts H ome MENU m → Support → Contents Home → ENTER E Suppor t Conten ts Home - The displayed image may diff er depending on the model. M agic I nfo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― MagicInfo Lite can also be accessed by pressing MagicInf o Lite/S on the remote control. ― T o launch Mag[...]

162 - The input source can also be changed by using the SOURCE button on the remote control . A ll S hare P lay MENU m → Support → Contents Home → AllShare P lay → ENTER E Enjoy videos, photos , music files saved on a USB Mass Storage Class (MSC ) device. ― Refer to page 163 f or details about the AllShare Play menu. S ou rce MENU m → S[...]

163 A ll S hare P lay Chapter 10 Wha t is A ll S hare P lay ? Play photo , video or music files saved on a storage device. Wirelessly connect a smar tphone to a PC using a wireless network. Play various content using one of the f ollowing methods in AllShare Pla y : • Using internal memor y and a USB device: Play video, phot o and music files fro[...]

164 Compa tible devices with AllShare P lay • Some types of USB devices, digital cameras and audio devices may not be compatible with the product. • AllShare Pla y is only compatible with USB MSC devices. • MSC device refers t o a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card r eaders [...]

165 Using a USB devic e Connecting a USB device 1 T urn on your product. 2 Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. 3 A message New device connected. appears when the USB device is connected properly . Select t ype of content to play from V ideos , Photos , and Music .[...]

166 C onnecting to a PC over a netw ork Play photo , video and music files saved on a PC through a network connection in AllShare Play mode. • F or details on how to configure a network , refer to the section Network Settings . • T o view content saved on the PC, connect the product and PC to the same wir eless router and visit http://www .sams[...]

167 Using the A ll S hare P lay featur es If you connect the product and a source device such as a cell phone or PC to the same network , you can play media content saved on the device such as videos , photos and music. Visit http://www.samsung .com or contac t the Samsung Electronics Customer Centr e for more information. Additional software may n[...]

168 Using the Basic A ll S har e P l ay F eatur es MENU m → Support → Contents Home → AllShare P lay → ENTER E AllShare Play / My List / Recently Played What's new Playlist Recently played les will be displayed here. No playlists have been created. Create a playlist to quickly and easily access your content. Updated les will be d[...]

169 Playing Selected F iles 1 Select files from the list of Videos , Photos , or Music files . 2 Pr ess TOOLS on the remote contr ol and select Play selection . ― The option does not appear if a folder is highlighted b y the cursor . 3 Select files and press Play . ― c appears for selected files. ― T o select all the files in the current fold[...]

170 My list MENU m → Support → Contents Home → AllShare P lay → My list → ENTER E Access desired content mor e conveniently and quickly. T o play files, select files or a Playlist and pr ess E . • Recently play ed : Display video, photo or music files that were r ecently played. This mode is suitable when playing files again that were p[...]

171 V ideos MENU m → Support → Contents Home → AllShare P lay → V ideos → ENTER E Playing a Video 1 Select the internal memor y or a USB device. Selec t files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • The file name appears on the top with its playing time. • If video time information is unk nown, the playin[...]

172 P hotos MENU m → Support → Contents Home → AllShare P lay → Photos → ENTER E V iewing a Photo (or Slide Show) 1 Select the internal memor y or a USB device. Selec t a file from the list of files. 2 Pr ess the E button. • T o view files manually , one at a time, press the left or right arrow buttons. • T o start the slide show, pr [...]

173 M usic MENU m → Support → Contents Home → AllShare P lay → Music → ENTER E Playing M usic 1 Select the internal memor y or a USB device. Selec t files from the list of files. 2 Pr ess the E button or ∂ (Play) button. • When the music is playing, you can sear ch using the π (RE W ) and µ (FF) button. ― If the sound is abnormal [...]

174 V ideos / P hotos / M usic Pla y Option menu When playing video or photo files, y ou can press the T OOLS button to display an Options menu. Option Name Operations V ideos Photos Music V i ew Sor t music files grouped by F older view , Title , Artist , Album or Genre . c Pl ay selection Select and play files from a list of music files. c Go to [...]

175 Option Name Operations V ideos Photos Music So und Mo de Y ou can change the Sound Mode . c c A u dio La nguage Y ou can enjoy video in one of supported languages. The function is enabled only when you play stream-type files which support multiple audio formats. c Su btitle Y ou can view a subtitle. Y ou can select a specific language if the su[...]

176 Suppor ted Subtitle and AllShar e Pla y le forma ts Subtitle External Internal • MPEG-4 timed text (.ttxt) • SAMI (.smi) • SubRip (.sr t) • SubViewer (.sub) • Micro DVD (.sub or .txt) • SubStation Alpha (.ssa) • Advanced SubStation Alpha (.ass) • Po werdivx (.psb) • Xsub Container: A VI • SubStation Alpha Container: MK V [...]

177 Suppor ted music le forma ts F ile Extension T ype Codec Comments *.mp3 MPEG MPEG1 Audio Layer 3 *.m4a, *.mpa, *.aac, *.3ga MPEG4 AAC *.flac FLAC FLAC The Seek ( jump) function is not suppor ted. Supports up to 2 channel Suppor ted V ideo Forma ts • Video content will not play , or not play correctly , if there is an error in the content o[...]

178 F ile Extension Con tainer V ideo Codec Resolution Frame r ate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.mov *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC 3 LPCM ADMPCM (IMA, MS) AAC HE-AAC WMA [...]

179 M ag ic I n fo L i te Chapter 11 F ile F ormats C ompatible with M agic I nfo L ite pla yer Read befor e using M agic I nfo L ite play er • The file system supports F A T16, F A T32 and NTFS. • A file with a vertical and horizontal resolution larger than the maximum resolution cannot be played . Check the vertical and horizontal resolution [...]

180 Con tents F ile Extension Container V ideo Codec Resolution Fr ame rate (fps) Bit rat e (Mbps) Audio C odec *.avi *.mkv *.asf *.wmv *.mp4 *.mov *.3gp *.vro *.mpg *.mpeg *.ts *.tp *.trp *.v *.vob *.svi *.m2ts *.mts *.divx AV I MKV ASF MP4 3GP VRO VOB PS TS DIVX 3.11 / 4.x / 5.x / 6.x 1920 x 1080 6~30 30 AC3 LPCM AAC HE-AAC WMA DD+ MPEG(MP3) D[...]

181 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correc[...]

182 Flash P ower P oint • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer on a W indows operating system cannot be guaranteed Optimization is needed during content creation • Flash Video - Compatible file format : FL V - Video [...]

183 PDF WORD • Compatible document file formats - Extension : pdf • F unc tions not supported - Content less than 1 pixel not supported because of per formance degradation issue. - Masked I mage, Tiled Image content not suppor ted. - Content with Rotated T ext, not suppor ted. - 3D Shadow Effects not supported. • Compatible document file form[...]

184 Appr oving a connected device fr om the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Lite from the menus on the left. 5 Select Unapproved from the sub-menus of Lite . 6 Select the Approve button f or your device from the list of unapprove[...]

185 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the corre[...]

186 M agic I n fo L ite MENU m → Support → Contents Home → MagicInfo Lite → ENTER E ― T o launch MagicInfo Lite , select MagicInfo Lite f or the Play Mode on the Sys tem . ― Pr ess the M agicInfo Lite/S button on the r emote control . M agic I nfo L ite play er Network schedule Y ou can view whether the ser ver is connected (approval) i[...]

187 Local schedule MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close Go to Local Schedule Manager → Click Create to create a schedule → Select the schedule you want to run 1 Select Local schedule in the MagicInfo Lite play er menu screen.[...]

188 USB Device A u to P lay MagicInfo Lite player Network schedule Local schedule Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in the " MagicInfoSlide " f older on USB Storage. ― Ens[...]

189 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , selec t and play content from int ernal or USB memor y according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Sche[...]

190 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Cancel Deselect Duration Return - A maximum of 99 content files can be selected. 5 Select Duration . Menu1.jpg 00:00:05 00:00:05 Menu2.jpg Direction Contents Duration Up Down Save Cancel Return Specify the sequen[...]

191 6 Select S ave . Selec t the memor y space you want to save the content t o. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Contents --:-- am~ --:-- pm No Items Save ancel --:-- am~ --:-- pm Tim Con Return Delete Internal USB Cancel Where do you want to sav e? 7 Check that th[...]

192 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Sched[...]

193 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to run. Next,[...]

194 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to view the details of. 2012.01.01_1834.lsch Create [...]

195 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Lite menu screen. MagicInfo Lite MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule files to copy are sav ed. Internal Memory 2012.01.01_[...]

196 C o ntent manager Cop ying content 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy . Menu2.jpg 5549.2MB 0.0MB (0) 6227.2MB 0.2MB (2) Menu1.[...]

197 Deleting cont ent 1 Select Content manager in the MagicInfo Lite menu scr een. MagicInfo Lite player MagicInfo Lite player Local Schedule Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete. Next, select Delete . • Content under Internal Memory and USB memor [...]

198 S ettings Settings Server Network Settings Default content duration Content Ratio Image Eect Default content Content La yout Schedule Name Safely Remove USB Device Return Close Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model. Ser ver Network Settings T o run MagicInfo Lite , connect to a network. S erv[...]

199 Default content duration Specify the duration to play content. • Image View er Time , Doc viewing time , PPT V iewer Time , PDF V iewing time , Flash Viewing time ― The duration must be at least 5 seconds. C ontent Ratio Specify the display aspect ratio by type when playing content. • Doc Ratio , PPT Ratio , PDF Ratio , Video Ratio - Orig[...]

200 When C ontent is Running V iewing the details of the content that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBXGDSP -0100.18 : Monitor : FF-FF-FF-FF-FF-FF : L ocal schedule : Disconnected : Connected : No Schedule to download - The displayed image may diff er depending on the mo[...]

201 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model. Pr ess the TOOLS button on the remote contr ol. Y ou can change the Picture Mode or Sound Mode s[...]

202 M ag ic I n fo P remium S Chapter 12 A Licence needs to be purchased to use MagicInf o Premium S . T o download the software, go to the Samsung homepage at http://www .samsunglfd.com. T o purchase a licence , contact a Customer Ser ver Centre . F ile F ormats C ompatible with M agic I nfo P remium S P lay er Read befor e using M agic I nfo P re[...]

203 V ideo Audio Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correc[...]

204 Flash P ower P oint PDF • Compatible with Flash 10.1 • Flash Animation - Compatible file format : SWF • Recommended resolution : 960 x 540 - Caution Performance comparable to Flash P layer on a Windows operating system cannot be guaranteed Optimization is needed during content creation • Flash Video - Compatible file format : FL V - Vid[...]

205 WORD T emplate les LFD • Compatible document file formats - Extension : .doc, .docx - Version : Office 97 ~ Office 2007 • F unc tions not supported - P age background effect - Some paragraph styles - Wor d Ar t - Align A group alignment err or may occur - 3D shapes (which will be displayed in 2D) - Office 2007 SmartAr t is not fully supp[...]

206 Network Schedule Multiframe Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or O ffice files (PPT and Word files) and PDF files, only one file type is supported at a time. •[...]

207 Playback restrictions • A maximum of two video ( Videos ) files can be play ed. • If PIP mode is enabled, more than one video ( V ideos ) file cannot be played. • More than one Flash file cannot be play ed. • F or O ffice files (PPT and Word files) and PDF files, only one file type is supported at a time. • Multiple videos ( Videos ) [...]

208 Appr oving a connected device fr om the ser ver 1 Access the server you have assigned to y our device. 2 Enter your ID and passwor d to log in. 3 Select Device from the top menu bar . 4 Select Premium from the menus on the left. 5 Select Unapproved from the sub-menus of Pr emium . 6 Select the Approve button f or your device from the list of un[...]

209 7 Enter the information requir ed to approve the device. • Device Name : Enter the device name. • Device Group : Select to specify the group . • Location : Enter the current location of the device . ― Pr essing the INFO button on the remote when a network schedule is running will display the details of the schedule. Check that the corre[...]

210 M agic I n fo P remium S MENU m : T Support C ontents Home MagicInfo P remium S ENTER E ― T o launch MagicInfo Pr emium S , selec t MagicInfo Premium S f or the Play Mode on the Sys tem . ― Pr ess the M agicInfo Lite/S button on the r emote control . M agic I nfo P remium S P layer Network schedule Y ou can view whether the ser ver is conne[...]

211 Local schedule MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close T emplat e Play er MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local sch[...]

212 Internal A uto P lay MagicInfo Premium S P layer Network schedule Local schedule T emplate Player Internal Auto Play USB Device Auto Play Mode Local schedule Server Connected USB Connected Return Close ― The option is enabled only when there is at least one content item, ex cept for music files, in Internal Memory . 1 Select Internal Auto Pla[...]

213 L ocal S chedule M anager Configure the settings f or playback from Local schedule . Alternatively , selec t and play content from int ernal or USB memor y according to the customized playback sequence. Registering a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pl[...]

214 4 Select Contents to specify the cont ent you want to play . 1 2 Menu1.jpg Menu2.jpg Contents Internal Memory USB No Items Folder1 OK Cancel Deselect Duration Return - A maximum of 99 content files can be selected. 5 Select Duration . Menu1.jpg 00:00:05 00:00:05 Menu2.jpg Direction Contents Duration Up Down Save Cancel Return Specify the sequen[...]

215 6 Select S ave . Selec t the memor y space you want to save the content t o. Menu1.jpg Menu2 --:-- am ~ --:-- pm No Item --:-- am~ --:-- pm --:-- am ~ --:-- pm No Item Create Time Contents Time Contents --:-- am~ --:-- pm No Items Save ancel --:-- am~ --:-- pm Tim Con Return Delete Internal USB Cancel Where do you want to sav e? 7 Check that th[...]

216 3 Select Edit . Menu1.jpg Menu2 Edit Time Contents Time Contents --:-- am~ --:-- pm No Items Save Cancel 12:00 am~ 12:00 pm Time Contents Return Delete --:-- am~ --:-- pm No Items 4 Change the details of the local schedule. Next, select S ave . Deleting a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Sched[...]

217 Running a Local schedule ― Ensure at least one Local schedule is r egistered. 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the loca[...]

218 V iewing the details of a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the local schedule you want to view the details[...]

219 Cop ying a Local schedule 1 Select Local Schedule Manager in the MagicInfo Premium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Player Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select a storage device where the local schedule files to copy are sa[...]

220 T emplate M anager Registering a T emplate 1 Select T emplate Manager in the MagicInfo Pr emium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select Create in the T emplate Manager screen. T emplat[...]

221 4 Organize a templat e by inserting text, video, photo, or PDF files as desired . Crea te Select the position and the background. Use background image Preview Previous Next Cancel - T o load a file or manually enter text, select T ex t input . C on tents Conten ts T ype Contents Size Source None No Items Fit t o screen PC OK Cancel Return • T[...]

222 5 Select sound or background music. Crea te Select sound or background music. Background Music Preview Previous Next Cancel • If two Videos files are assigned , selec t the file with the sound you want to use. - If one of the video files includes PIP content, sound from the PIP content can be selected. • If a Flash file is selected, it is n[...]

223 C o ntent manager Cop ying content 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to copy . Menu2.jpg 5549.2MB 0.0MB (0[...]

224 Deleting cont ent 1 Select Content manager in the MagicInfo P remium S menu screen. MagicInfo Premium S MagicInfo Premium S Pla yer Local Schedule Manager T emplate Manager Content manager Settings Mode Local schedule Server Connected USB Connected Return Close 2 Select the content you want to delete. Next, select Delete . • Content under Int[...]

225 S ettings Settings Server Network Settings Default content duration Content Ratio Copy Deployed F olders Image Eect Default content Content La yout Schedule Name Return Close Manual Random None Landscape YYYYMMDD - The displayed image may diff er depending on the model. Ser ver Network Settings T o run MagicInfo Pr emium S , connec t to a ne[...]

226 Default content duration Specify the duration to play content. • Image View er Time , T emplate Display Duration , Doc vie wing time , PPT View er Time , PDF Viewing time , F lash Viewing time ― The duration must be at least 5 seconds. C ontent Ratio Specify the display aspect ratio by type when playing content. • Image ratio , Doc Ratio [...]

227 When C ontent is Running V iewing the details of the content that is running Information Software Version Device Name Device ID Mode Server USB Schedule download Cancel : A-L UBXGDSP -0100.18 : Monitor : FF-FF-FF-FF-FF-FF : L ocal schedule : Disconnected : Connected : No Schedule to download - The displayed image may diff er depending on the mo[...]

228 Changing the settings for the c ontent that is running Picture Mode Sound Mode PIP Background Music Background Music Setting Safely Remove USB Device T ools Standard Standard O O Return - The displayed image may diff er depending on the model. Pr ess the TOOLS button on the remote contr ol. Y ou can change the Picture Mode or Sound Mode s[...]

229 M ag ic I n fo V ideowall S Chapter 13 A licence needs to be purchased to use MagicInf o Video wall S . T o download the software, go to the Samsung homepage at http://www .samsunglfd.com. T o purchase a licence , contact a Customer Ser ver Centre . F ile F ormats C ompatible with M agic I nfo V ideow all S P lay er Read befor e using M agic I [...]

230 V ideo Image • 3D video is not supported. • Content with a resolution lar ger than the resolution specified in the table above is not supported. • Video content with a Bit rate or F rame rate larger than the rate specified in the table above can cause choppy video during playback. • Video content will not play , or not play correctly , [...]

231 Restrictions • Only one video ( Videos ) file can be pla yed per client. ― Different cont ent files can be played on the displays of a video wall. T wo video ( Videos ) files cannot be played on a single display of a video wall . Available Available Not available[...]

232 M agic I n fo V ideow all S MENU m → Support → Contents Home → MagicInfo V ideowall S → ENTER E → RETURN ― T o launch MagicInfo V ideowall S , selec t MagicInfo V ideowall S for the Play Mode on the Syste m . ― Pr ess the M agicInfo Lite/S button on the r emote control . S ettings Settings Default Storage Default content Content L[...]

233 When C ontent is Running Information Software Version Device Name Device ID USB Cancel : A-L UBXGDSP -0100.18 : Monitor : FF-FF-FF-FF-FF-FF : Connected - The displayed image may diff er depending on the model. Pr ess the INFO button on the remote control. • Software Version : Displa ys the sof tware version of a device • Device Name : Displ[...]

234 T r oubleshooting Guide Chapter 14 Requirements Bef ore C ontac ting S amsung C ustomer Ser vice C entre Before calling Samsung Cust omer S er vice Centre, t est your product as follows . I f the problem persists, contact Samsung Customer Service Centre. T esting the Pr oduct Check if your product is operating normally by using the product test[...]

235 Check the follo wings. Installation issue (PC mode) The screen keeps swit ching on and o. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are f ound on all four sides of the screen when an HDMI or HDMI-DVI cable is connected to the product and PC. The blank spaces found on the scr een [...]

236 Screen issue The screen is not clear . T he screen is blurry . Adjust Coarse and F ine . Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level . The screen appears unstable and shaky . Check that the resolution and frequency of the PC and graphics card ar e set within a rang[...]

237 Screen issue The screen displa y does not look normal. Encoded video content may cause the display to appear corrupted in scenes f eaturing fast moving objects such as in a spor ts event or action video. Low sig nal level or low picture quality may cause the display to appear corrupted. This does not mean the product is defective. A cell phone [...]

238 Sound issue There is no sound . Check the connection of the audio cable or adjust the volume. Check the volume. The volume is t oo low . Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software programme . Video is a vailable but there is no sound. If an HDMI cab[...]

239 Sound issue There is audible sound when the v olume is muted. When Speaker Select is set to External , the volume button and mute function are disabled. Adjust the volume f or the ex ternal speakers. Audio settings for main speakers are separat e from the internal speak ers on the product. Changing or muting the volume on the product does not a[...]

240 Intel ® W iD i connection issue Unable to establish a WiDi connection. It is recommended using the laptop within a 3m radius of the product. Y ou may encounter a connection failure or scrambled screen in a multiple r outer environment such as an office. Since WiDi is used to handle real-time streaming , you may encounter a scrambled signal in [...]

241 Intel ® W iD i connection issue If you change the WiDi-based wireless LAN settings, y ou may encount er a temporary scrambled or disconnected adapter . Do not change the wireless LAN settings while in WiDi mode. If the product is too far away from the lapt op computer , the playback performance of the product will deteriorate accordingly . It [...]

242 Intel ® W iD i connection issue When I change the screen resolution, I e xperience temporary interference on the screen. If you change the screen resolution in WiDi mode, you may encount er temporary inter ference on the screen. I cannot resize the video screen on the pr oduc t with the WiDi pr ogramme on m y laptop computer . The resizing men[...]

243 Other issue There is no sound fr om the speakers in HDMI mode when a DVI-HDMI cable is connected. DVI cables do not transmit sound data. Make sure to connect the audio cable to the correct input jack to enable audio. HDMI B l ack Le vel is not functioning properly on an HDMI device with Y CbCr output. This function is available only when a sour[...]

244 Other issue In power-sa ving mode, when the input sourc e is Di spl ay P o rt , PC display settings cannot be sav ed. Go to Syste m → General and set Max. Pow er S aving to Off . Alternatively , configure the PC display output settings again. Ensure the set is turned on. When booting the PC with the input source set t o Di spla y Po rt , the [...]

245 Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows XP: Go to C ontrol Panel → Appear ance and Themes → Display → Settings → Advanc ed → Monitor and adjust the frequency in Monitor Settings . • Windows ME/2000: Go to C ontrol Panel → Display → Settings → Advanc ed → [...]

246 Question Answer How do I set pow ersaving mode? • Windows XP: Set pow er-saving mode in Control P anel → Appearance and Themes → Display → Screen Saver Settings or BIOS SETUP on the PC. • Windows ME/2000: Set power -saving mode in Con trol P anel → Display → Screen Sav er Settings or BIOS SE TUP on the PC. • Windows Vista: Set p[...]

247 Specications Chapter 15 1 Size 2 Display area H V 3 Dimensions ( W x H x D) W D H General Model Name MD65C Panel Siz e 65 Class (64.5 inches / 163 cm) Display area 1428.48 mm (H) x 803.52 mm ( V ) 56.2 inches (H) x 31.6 inches ( V ) Dimensions ( W x H x D) 1467.4 x 848.0 x 56.2 mm / 57.8 x 33.4 x 2.2 inches W eight (without stand) 27.4 kg / [...]

248 Model Name MD65C Resolution Optimum resolution 1920 x 1080 @ 60 Hz Maximum resolution 1920 x 1080 @ 60 Hz Maximum Pixel C lock 148.5 MHz (Analogue, Digital) Audio Output 10 W X 2 Po wer Supply This product uses 100 to 240V . Refer to the label at the back of the product as the standard voltage can vary in different countries. USB 1 DOWN Signal [...]

249 [Recommendation] - EU Only • Hereby , Samsung Electronics, declares that this Monitor is in compliance with the essential requir ements and other relevant provisions of Dir ec tive 1999/5/EC. • The official Declaration of Conformity may be found at http://www .samsung.com, go to Support > S earch P roduct Support and enter the model name[...]

250 P ow erS av er The power-sa ving function of this product reduces power consumption by switching off the scr een and changing the colour of the power LED if the product is not used for a specified period of time. The power is not turned off in power -saving mode. T o switch the screen back on, pr ess any key on the k eyboard or move the mouse. [...]

251 Pr eset T iming Modes ― This product can be set to only one resolution f or each screen size to obtain the optimum picture quality due to the nature of the panel. Using a r esolution other than the specified resolution may degrade the picture quality . T o avoid this, it is recommended that you select the optimum resolution specified f or you[...]

252 Resolution Horizontal F requency (kHz) V er tical Fr equenc y (Hz) Pix el Clock (MHz) Sync P olarity (H/V ) VESA, 1024 x 768 56.476 70.069 75.000 -/- VESA, 1024 x 768 60.023 75.029 78.750 +/+ VESA, 1152 x 864 67.500 75.000 108.000 +/+ VESA, 1280 x 720 45.000 60.000 74.250 +/+ VESA, 1280 x 800 49.702 59.810 83.500 -/+ VESA, 1280 x 1024 63.981 60[...]

253 Appendix Chapter 16 C ontac t SAMSUNG WORLD WIDE ― If you have any questions or comments relating t o Samsung products, please contact the SAMSUNG customer care centre. NORTH AMERICA U.S.A 1-800-SAMSUNG(726-7864) http://www.samsung .com CANADA 1-800-SAMSUNG(726-7864) http://www.samsung .com/ca (English) http://www.samsung .com/ca_fr (French) [...]

254 LA TIN AMERICA COL OMBIA 01-8000112112 Bogotá: 6001272 http://www.samsung .com/co COST A RICA 0-800-507-7267 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) DOMINICA 1-800-751-2676 http://www.samsung .com/latin (Spanish) http://www.samsung .com/latin_en (English) ECU ADOR 1-800-10-7267 http://www.samsung .com[...]

255 LA TIN AMERICA PUERTO RIC O 1-800-682-3180 http://www.samsung .com TRINIDAD & TOBAGO 1-800-SAMSUNG(726-7864) http://www.samsung .com URUGU A Y 40543733 http://www.samsung .com VENEZUELA 0-800-100-5303 http://www.samsung .com EUROPE A USTRIA 0810 - SAMSUNG (7267864, € 0.07/min) http://www.samsung .com BEL GIUM 02-201-24-18 http://www.samsu[...]

256 EUROPE FINLAND 030-6227 515 http://www.samsung .com FRANCE 01 48 63 00 00 http://www.samsung .com/fr GERMANY 0180 5 SAMSUNG bzw. 0180 5 7267864* (*0,14 €/Min. aus dem dt. Festnetz, aus dem Mobilfunk max. 0,42 €/Min.) http://www.samsung .com GREECE 80111-SAMSUNG (80111 726 7864) only from land line (+30) 210 6897691 from mobile and land line[...]

257 EUROPE ROMANIA 08008 SAMSUNG (08008 726 7864) TOLL FREE No . http://www.samsung .com SERBIA +381 11 321 6899 (old number still active 0700 7267864) http://www.samsung .com SL OV AKIA 0800 - SAMSUNG(0800-726 786) http://www.samsung .com SP AIN 902 - 1 - SAMSUNG (902 172 678) http://www.samsung .com SWEDEN 0771 726 7864 (SAMSUNG) http://www.samsu[...]

258 CIS RUSSIA 8-800-555-55-55 http://www.samsung .com T ADJIKIST AN 8-10-800-500-55-500 http://www.samsung .com UKRAINE 0-800-502-000 http://www .samsung.com/ua (Uk rainian) http://www.samsung .com/ua_ru (Russian) UZBEKIST AN 8-10-800-500-55-500 http://www.samsung .com ASIA P ACIFIC A USTR ALIA 1300 362 603 http://www.samsung .com CHINA 400-810-58[...]

259 ASIA P ACIFIC PHILIPPINES 1-800-10-SAMSUNG(726-7864) for PLD T 1-800-3-SAMSUNG(726-7864) for Dig itel 1-800-8-SAMSUNG(726-7864) for Globe 02-5805777 http://www.samsung .com/ph SINGAPORE 1800-SAMSUNG(726-7864) http://www.samsung .com T AIW AN 0800-329-999 0266-026-066 http://www.samsung .com THAILAND 1800-29-3232 02-689-3232 http://www.samsung .[...]

260 MENA OMAN 800-SAMSUNG(726-7864) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) Q ATA R 800-2255 (800-CALL) http://www.samsung .com/ae (English) http://www.samsung .com/ae_ar (Arabic) SA UDI AR ABIA 9200-21230 http://www.samsung .com/sa (Arabic) SYRIA 18252273 http://www.samsung .com/Levant (English) TURKEY 444 77 11[...]

261 AFRICA SOUTH AFRICA 0860-SAMSUNG (726-7864) http://www.samsung .com T ANZ ANIA 0685 88 99 00 http://www.samsung .com UGANDA 0800 300 300 http://www.samsung .com ZAMBIA 211350370 http://www.samsung .com[...]

262 Responsibility for the P ay Ser vice ( Cost t o C ustomers) ― When the ser vice is requested, in spit e of in war ranty, we ma y charge you for a visit from a service technician in the following cases . Not a product defect Cleaning of the product, Adjustment, Explanation, Re-installation and etc. • If a ser vice technician gives instructio[...]

263 WEEE C orrect Disposal of This P roduc t ( W aste Electrical & Elec tronic Equipment) (Applicable in countries with separate collection systems) This marking on the product, accessor ies or literature indicates that the pr oduct and its electronic accessories (e.g. charger , headset, USB cable) should not be disposed of with other household[...]

264 Optimum Picture Quality and Afterimage Burn-in Pr evention Optimum Picture Quality • T o enjoy the optimum picture quality , go to Control P anel on your PC and adjust the resolution and r efresh rate as follows. The picture quality of TFT-L CDs may degrade if the optimum resolution is not selected. - Resolution: 1920 x 1080 - Vertical freque[...]

265 Pr evention of A f terimage Burn-in What is afterimage burn-in? Afterimage burn-in should not occur when the LCD panel is operating normally . Normal operation refers to a continuously changing video pattern. If the L CD panel displays a fixed pattern for an extended period of time (more than 12 hours), a slight voltage differ ence may occur be[...]

266 • Avoid combinations of a t ext colour and background colour of contrasting brightness. ― Avoid using g rey as it may contribute to afterimage burn-in. ― Avoid using colours of contrasting brightness (black and white; g rey). FLIGHT TIME OZ348 20:30 : : FLIGHT TIME OZ348 20:30 : : • Regular T ext colour Change - Use bright colours of si[...]

267 Manufactured under licence from Dolby Laboratories. Dolby and the double-D symbol are trademarks of D olby Laboratories. Ⓡ Manufactured under a licence from U .S. Patent No ’ s: 5,956,674, 5,974,380, 5,978,762, 6,487,535, 6,226,616, 7,212,872, 7,003,467, 7,272,567, 7,668,723, 7,392,195, 7,930,184, 7,333,929 and 7,548,853. DT S, the Symbol, [...]

268 T erminology 480i / 480p / 720p / 1080i / 1080p ____ Each of the scanning rates above ref ers to the number of effective scanning lines that decides the screen resolution. The scanning rate may be indicated in i (interlaced) or p (progr essive), depending on the scanning method. - Scanning Scanning refers to a pr ocess of sending pixels that fo[...]