Samsung ML-5050G Bedienungsanleitung

LASER PRINTER ML-5050G Series User ’s Manual 00-Cover&Contents 7/16/99 8:05 PM Page 1[...]

This manual is provided for information purposes only . All information included herein is subject to change without notice. Samsung is not responsible for any damage, dir ect or indirect, arising fr om or related to use of this manual. © 1999 Samsung. All rights reserved. ¥ ML-5050G Series and the Samsung logo are trademarks of Samsung. ¥ Centr[...]

Control Locations and Functions ÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐ 1 Front V iew ÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐ?[...]

Poor Print Quality ÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐ 19 Paper Problems ÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐÐ[...]

ELECTRONICS V isit us at http://samsungtelecom.com P/N. JC68-00147B Rev .1.00 00-Cover&Contents 7/16/99 8:05 PM Page 5[...]

1 Introducing Y our Printer Automatic Paper Feeder Holds 150 sheets of paper . Paper Guides Adjust to the width of paper . Face-down Stacker Holds printed documents. If printed on plain paper , a maximum of 100 sheets can be held. Stacker Extender Supports paper stacked in the paper output bin. Face-up Stacker Holds a single sheet of special media [...]

2 Introducing Y our Printer Rear View Inside Power Switch Power Cord Connector Printer Cable Connector Front Cover T oner Cartridge 01-Setup 7/16/99 2:03 PM Page 2[...]

Indicator Lights INDICA TOR DESCRIPTION READY (on) The printer Õs power is ÔONÕ. READY (blink) The printer is receiving or pr ocessing data. ERROR (on) ¥ There is no image cartridge installed, or the cover is open. ¥ Print error occurs. ¥ If the P APER light is also on, there is paper jammed. P APER (on) The paper bin is empty . 3 Introducing[...]

T ype Plain paper (20 to 30 Ib) Envelopes Cards (16 to 32 Ib) T ransparency Film Paper Labels Size Letter: 8 1/2 x 1 1Ó Legal: 8 1/2 x 14Ó Executive: 7 1/4 x 10 1/2 Ó A4: 210 x 297 mm A5: 148 x 210 mm B5: 182 x 257 mm Folio: 8 1/2 x 13Ó COM-10: 4 1/8 x 9 1/2 Ó Monarch: 3 7/8 x 7 1/2 Ó C5: 162 x 229 mm C6: 1 14 x 162 mm DL: 1 10 x 220 mm Feed [...]

5 Paper Handling 2. Prepare the print material for loading. ¥ For paper and envelopes: - Flex paper or fan envelopes back and forth. Do not fold or crease the paper . Straighten the edges on a level surface. Note: If envelopes jam while printing, try reducing the number of envelopes in the automatic feeder . Loading a Stack of Paper Y ou can stack[...]

6 Paper Handling 3. Load the print material in the automatic feeder . Do not load too much print material. Do not differ ent paper types. See the following directions on how to load each type of print material. ¥ Load paper or transparencies with the print side facing you. ¥ For transparencies: - Hold the transpar encies by the edges and avoid to[...]

7 Paper Handling ¥ Load envelopes with the flap side facing away from you. The stamp area is on the bottom right corner . The end of the envelope with the stamp area enters the feeder first. ¥ Load letterhead paper with the design facing you. The top edge of the sheet with the logo should enter the printer first. LETTERHEAD Notes: ¥ Do not feed [...]

5. Pull up the extender on the face-down stacker . The face-down stacker can hold a maximum of 100 printed pages. 6. Before starting your print job, make sur e you select the correct paper size and feed source in your application. 4. Adjust the guides to the width of the print material. Slide the guides until they lightly touch the stack of print m[...]

9 Paper Handling Feeding Manually Use the manual feeder to feed one sheet at a time into your printer . The manual feeder is in front of the automatic feeder . 1. If necessary , open the face-up stacker . See page 10. 2. Load the print material in the manual feeder and adjust the paper guides to the width of the print material. See the instructions[...]

10 Paper Handling 2. If you use the face-up stacker , printed pages will exit through the front output path, with the printed side up. Using the Face-up Stacker 1. Push both sides of the stacker marked , and the stacker will open. Notes: ¥ The face-up stacker may not hold the printed materials properly . ¥ The printed pages will not stack in the [...]

11 Paper Handling Paper Guidelines When selecting or loading paper , envelopes, or other special media, keep these guidelines in mind: ¥ Attempting to print on damp, curled, wrinkled, or torn paper can cause paper jams and poor print quality . ¥ Use cut-sheet paper only . Y ou cannot use multipart paper . ¥ Use only high quality , copier grade p[...]

12 Operating Y our Printer Selecting Y our Printer T o use all of the features of your ML-5050G Series printer , make sure it is selected as the default printer . If you use more than one printer , select ML-5050G Series as the default printer in the following manner : W indows 95 / 98 / NT 4.0 1. Select Start , Settings , then Printers . 2. Double[...]

13 Operating Y our Printer Printing a Document This procedur e describes the general steps requir ed for printing from various W indows applications. The exact steps for printing a document may vary depending on the application you are using. Refer to your applicationÕs documentation for the exact printing procedur e. 1. Start the program you are [...]

14 Operating Y our Printer Print Settings Most W indows applications allow you to make changes to the printer settings. This changes the number of copies, paper orientation, and paper size. Note: Most Windows applications will override settings you specify in the printer driver . Change all printer settings available in the software application fir[...]

15 Operating Y our Printer The following Properties dialog box appears. Paper T ab On the Paper tab, you can change the number of copies, paper size, paper source, page orientation, nUP and scale the image of your print job. For Help on each item, click ? at the top of the dialog box, and then click the desired item. nUP: For multi-page documents, [...]

16 Operating Y our Printer Quality T ab On the Quality tab, you can adjust the print quality of your document by setting resolution. Higher r esolution looks better but takes longer to print and requir es more memory . Y ou can also adjust the Lighten/Darken and contrast for all graphics in your documents. Output T ypeÕ s Quality : Each of the sel[...]

17 Operating Y our Printer Dither Line : Most output devices rely on dithering to achieve shades of gray . With the Dither Lines option on (the default), your ML-5050G Series printer gives you accurate grays even if it has to dither them. Y ou get exactly what you ask for . However , fine dithered lines appear dashed instead of solid. With the Dith[...]

18 Operating Y our Printer Adobe and T rue T ype Font Engine Checkboxes : The primary use of this feature is for tr oubleshooting by a process of elimination with a limited number of applications. If your printing works OK, you should ignore these settings. In some circumstances, certain applications can cause pr oblems with your ML-5050G Series pr[...]

19 T roubleshooting Poor Print Quality Problem Action ¥ Hot/humid or cold/dry weather conditions may affect how well toner adheres to paper . Select the next darker print setting. ¥ Make sure the T oner Cartridge is installed correctly . ¥ The T oner Cartridge may be out of toner . Install a new Cartridge. ¥ Make sure you ar e using the correct[...]

20 T roubleshooting Paper Problems Problem Action ¥ Remove paper from the paper feeder and flex or fan the paper . ¥ Make sure ther e is not too much paper in the paper tray . Depending on the thickness of your paper , the automatic feeder can hold up to 150 sheets. ¥ Make sure you ar e using the correct type of paper . See ÒSelecting Paper T y[...]

21 T roubleshooting Problem Action Printing Problems ¥ The film or envelopes may not be loaded correctly . Make sure you load no mor e than 10 transparencies or envelopes in the automatic feeder . Depending on the thickness, the maximum capacity may need to be reduced. ¥ When you feed paper into the manual feeder , you must load one sheet at a ti[...]

22 T roubleshooting Problem Action ¥ Change the parallel interface cable. ¥ Make sure you ar e using the correct printer driver . ¥ Graphics print more slowly than text. ¥ Make sure the T oner Cartridge is properly installed. ¥ Paper may not be loaded and aligned correctly in the paper feeder . ¥ The applicationÕs paper size and margin setti[...]

23 T roubleshooting Before Y ou Call For Service If youÕre unable to solve printer pr oblems, you may want to call for service. Before calling, however , check these things: ¥ Is the power cord plugged into the printer? ¥ Is the power cord plugged dir ectly into a wall outlet? ¥ Is your printer connected properly to your computer? ¥ Are all ot[...]

24 T roubleshooting Clearing Paper Jams If the paper has just started to feed from the feeder when the jam occurs: 1. Pull the jammed paper back out of the feeder toward you. 2. Open and close the cover to resume printing. 03-Troubleshooting 7/16/99 1:51 PM Page 4[...]

25 T roubleshooting If the jam occurs near the fusing unit, do not pull the paper through the fuser or you may damage the fusing unit. 3. Check that there is no other paper in the printer . 4. Close the cover . The printer continues printing. If the jam occurs inside the printer: 1. Open the cover , and remove the T oner Cartridge. 2. Grasp the pap[...]

26 T roubleshooting Tips for A voiding Paper Jams By carefully selecting print materials and loading them pr operly , you should be able to avoid most paper jams. If jams occur frequently , make sure you ar e following these tips to avoid jams. ¥ Follow the procedur es in ÒLoading a Stack of PaperÓ on page 5 to load paper properly . ¥ Do not ov[...]

27 Supplies and Maintenance Cartridge Maintenance T o get the maximum benefit from your T oner Cartridges: ¥Do not remove a T oner Cartridge from its packaging until you are ready to install it. ¥Do not refill the T oner Cartridge. The printer warranty does not cover damage caused by using a refilled Cartridge . ¥Store the T oner Cartridge in th[...]

28 Supplies and Maintenance 2. Lift up and pull out the old T oner Cartridge. Follow the instructions printed on the cartridge box to r ecycle the used cartridge. 3. Unpack the new T oner Cartridge, remove the sealing tape, and slowly and gently rock it 5 or 6 times to distribute the toner . 4. Find the cartridge slots inside the printer , one each[...]

29 Appendix FCC Regulations This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to pr ovide reasonable pr otection against harmful interference in a r esidential installation. This equipment generates, uses and can radiate radio frequency en[...]

30 Appendix FCC DECLARA TION OF CONFORMITY according to FCC Part 15 1.Product Name : Laser Printer 2.Model Number : ML-5050G Series 3.FCC Rules : TESTED BY COMPL Y WITH FCC P AR T 15 CLASS B 4.Operating Environment : FOR HOME OR OFFICE USE 5.FCC Compliance Statement This device complies with Part 15 FCC rules.Operating is subject to the following t[...]

EC Declaration of Conformity We , SAMSUNG ELECTRONICS CO.,L TD #259, Gong Dan-Dong, Gumi-City , Kyung Buk, Korea declare sole r esponsibility that the ML-5050G Series Laser printer meets the intent of Directive 89/336/EEC for Electr omagnetic Compatibility and Low V oltage Directive 73/23/EEC. Compliance was demonstrated to the following specificat[...]

Laser Safety Statement The printer is certified in the U.S. to conform to the requir ements of DHHS 21 CFR Subchapter J for Class I(1) laser products, and elsewher e is certified as a Class I laser product conforming to the r equirements of IEC 825. Class I laser products ar e not considered to be hazar dous. The laser system and printer are design[...]

Laser product labels are located above the print cartidge. CLASS 1 LASER PRODUCT LASER KLASSE 1 LUOKAN 1 LASERLAITE APP AREIL À LASER DE CLASSE 1 TO IEC 825 Safety Information PRODUCT SAFETY USA UL 1950 (UL LISTING) CANADA CSA C22.2 No. 950 & UL 1950 (CSA Certification) EEC (Europe) IEC 60950/EN 60950 (T Ü V GS Certification) CB IEC 60950 LAS[...]

Item Description Remarks Speed Resolution Developing method/T oner W arm up time First print time Duty cycle Size (w x d x h) W eight Power consumption Noise level Input capacity Output capacity Paper size T ype Life time Charging/T ransfer CPU Emulation Memory Interface Minimum System Requirement 8 PPM 600 DPI Eletrophotography Non-mag monocompone[...]