Samsung SCU-VAC1 Bedienungsanleitung

Positioning System User Manual SCU-2370 SCU-9051 SCU-V AC SCU-V AC1[...]

Copyright ©2 01 0 Samsung T echwin Co., Ltd. A ll righ ts re ser ved. Tr a d e m a r k is the registered logo of Samsung T echwin Co., Ltd. The name of this product is t he registered trademark of S amsung T echwin Co. , Ltd. Other t rademarks mentioned in t his manual are th e registered trademark of their respective company . Restriction Samsung[...]

English - 3 ● SAFETY INFORMATION safety information CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK) NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This symbol indicates that dangerous voltage consisting a risk of electric shock is present [...]

4_ safety information safety information Install it in a place with good ventilation. Avoid aiming the camera directly towards extremely bright objects such as sun, as this may damage the CCD image sensor. Apparatus shall not be exposed to dripping or splashing and no objects fi lled with liquids, such as vases, shall be placed on the apparatus. T[...]

English - 5 ● IMPORTANT SAFETY INSTRUCTIONS Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Clean only with dry cloth. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. Do not install near any heat sources such as radiators, heat registers, or other a[...]

6_ important safety instructions PRECAUTIONS ON INSTALLATION AND USE Be sure to install the product vertically. Do never place it in other ways or reversely. For safety reasons to prevent a risk of accidental drop-off, use a strong safety chain while installing the product. The wall where you intend to install the product should be fi rm and solid[...]

English - 7 ● CONTENTS contents INTRODUCTION 8 8 Features 9 What’s included 10 Component Names and Functions CONNECTION & INSTALLATION 12 12 Camera Wiring Interface Board 13 Camera and Appliances Wiring Diagram 15 Communication Protocol DIP Switch Settings 18 Camera ID DIP Switch Settings 19 Preparing Adapter and Cables 20 Product Confi gu[...]

8_ introduction Features Versatile protocols and coaxial communication RS-422/485, Coaxial communication methods are supported. RS-422/485 (10 species) : SAMSUNG-T, SAMSUNG-E, Pelco(D/P), Panasonic, Honeywell, AD, Vicon, GE, Bosch. Coaxial Communications: Pelco Coaxitron (automatic detection) Wide Range Auto Security Functions Multiple Preset Funct[...]

English - 9 ● INTRODUCTION WHAT’S INCLUDED Check if the following items are included in the product package. Main Body Sunshield L-type hexagon wrenches (5.0mm) Positioning System User Guide SCU-2370 SCU-9051 SCU-VAC SCU-VAC1 Fuse (2EA) User Guide Mount The following items are sold separately from the camera. SBU-220PM Pole Mount SBU-500WM Wall[...]

10_ introduction introduction COMPONENT NAMES AND FUNCTIONS Front ❶ Lens ❷ Wiper : Use it to wipe out the front glass of the housing. ❸ Sunshield ❹ Inside the housing ➋ ➍ ➌ ❶[...]

English - 11 ● INTRODUCTION Back ➋ ➍ ➌ ❶ COM/ID Setup Switch ❷ Video Out Cable ❸ Communication Cable ❹ Power Cable For the DIP switch settings, please refer to the on Pages 15~18. M  ❶[...]

12_ connection & installation Camera Wiring Interface Board For the camera wiring, please refer to the picture below. (When using coaxial communication, a separate control signal connection is not required.) y RS-485 Communications y RS-422 Communications Communication/Control Signal Diagram Video Communications/ Control Signal Alarm Input Alar[...]

English - 13 ● CONNECTION & INSTALLATION CAMERA AND APPLIANCES WIRING DIAGRAM Connecting with Samsung Techwin’s “Stand Alone DVR” RS-485 : y RS-422 : y Camera Camera RXD+ RXD- RXD+ RXD- TXD+ TXD- T(TXD)+ T(TXD)- T(TXD)+ T(TXD)- R(RXD)+ R(TXD)- Stand Alone DVR Stand Alone DVR The maximum power capacity of the built-in relay is 30VDC/2A, [...]

14_ connection & installation connection & installation Connecting with the Samsung Techwin Controller SPC-6000 RS-485 : y RS-422 : y Camera Camera RXD+ RXD- TXD+ TXD- RXD+ RXD- <Controller> To connect to Samsung PC DVR RS-485 : y Camera RXD+ RXD-   PC DVR TX RX TX RX +- + - + - + - G TXD+ TXD- RXD+ RXD- TXD+ TXD- M E N U S E A [...]

English - 15 ● CONNECTION & INSTALLATION COMMUNICATION PROTOCOL DIP SWITCH SETTINGS Coaxial communication automatically detects signals, and so does not require a separate communication setup process. Pin No. Purpose 1 ~ 4 Protocol Settings 5 Transfer Method (RS-485/422) Settings 6 Response Mode Settings 7 Terminal Resistance RX 8 Terminal Re[...]

16_ connection & installation connection & installation Communication Method Settings Select a communication method for the camera. Function ON OFF #5 Transfer Mode Switch RS-422(4Wire) RS-485(2Wire) Communication Response Settings Select a communication response method for the camera and controller: Response or No Response. Function ON OFF[...]

English - 17 ● CONNECTION & INSTALLATION Baud Rate Settings Select the transfer speed of a selected communication protocol. No Baud Rate(BPS) #9 #10 1 2,400 ON ON 2 4,800 ON OFF 3 9,600 OFF OFF 4 19,200 OFF ON To use a third party controller with this product, please contact our After-Sales Service or Technology Department. Controls Using Dif[...]

18_ connection & installation connection & installation CAMERA ID DIP SWITCH SETTINGS Assign a unique number for each camera to identify itself from others. The initial value of the switch is “0”, and all of the 8 switches are defaulted to OFF. Each switch has a unique value, and the board ID is the sum of the values of the switches. Re[...]

English - 19 ● CONNECTION & INSTALLATION PREPARING ADAPTER AND CABLES Power Adapter Power adapter has the capacity of AC24V 6A. Video Cable The camera’s video output port is connected to the monitor with a BNC coaxial cable, shown below : If the distance between the camera and the monitor exceeds the recommended maximum, please use an auxil[...]

20_ connection & installation connection & installation PRODUCT CONFIGURATIONS M E N U SE AR CH M UL TI RE C ME NU PR ESE T GRO UP TR A CK CAM 1 2 3 4 5 6 7 8 9 0 M ON CLO SE O P E N NE AR FAR WID E T E L E P T Z D VR M T X S E T UP E S C FU N C E NT E R M E N U SE AR C H M UL TI RE C ME NU PRE SE T GR O UP TR A CK CAM 1 2 3 4 5 6 7 8 9 0 M[...]

English - 21 ● CONNECTION & INSTALLATION CAMERA INSTALLATION Pole Mount Wall Mount y y Do not connect the camera to a power outlet until the installation is complete. Supplying power in the middle of the installation may cause fi re or damage the product. Bend back the wiper before opening the housing. Ensure that the housing is closed compl[...]

22_ connection & installation connection & installation To install the light projector Insert 4 hex screws into the hole in the bottom of the bracket as shown. Use 4 hex screws from outside bottom up to fix the light projector. Insert the hex screw into the center hole from the top of the mount to the light projector. Connect the cables. In[...]

English - 23 ● SETUP setup INTERFACE SYMBOLS Motion Detection Standby/Operation Display : When in standby mode, the “ ” in the upper right of the screen blinks and then changes to “ ” if motion is detected. Alarm Input Port Status Display : " 1 ", " 2 " and " 3 " in the upper right of the screen blink. Curren[...]

24_ setup setup USING AND SETTING THE MENUS OSD (On-screen Display) Indicators Operating Your Camera Panning and Tilting : Use the joystick of the controller or its direction buttons. Controlling Zoom : Move the joystick clockwise (Tele) or counterclockwise (Wide), or use the zoom buttons. Accessing Screen Menus: Press the Menu or OSD button on the[...]

English - 25 ● SETUP OSD Menu Chart You can have an overall view of the menu structure. For more information, refer to the applicable page or section in the manual. Ú For more information about SCU-9051, refer to the “Camera Setting” section in the provided manual. Ú For more information about SCU-VAC, refer to the “Camera Setting” sect[...]

26_ setup setup CAMERA SETTING Ú The camera setting section in this manual is explained based on SCU-2370. For SCU-9051/SCU-VAC, refer to the applicable user manual. Focus and Zoom Settings Focus Mode AUTO : Performs continuous auto-focus. MANUAL : Changes the camera mode to Manual Focus. ONE SHOT : Auto-focuses the camera once after the Pan, Tilt[...]

English - 27 ● SETUP Zoom Tracking Through this menu you can set up the camera’s focus mode when zooming. Mode AUTO : Auto-focuses when zooming. TRACKING : Focuses manually when zooming. OFF : Disable the focus modes when zooming. (Full manual mode) Speed SLOW/MEDIUM/FAST : Adjusts the zooming speed. z - - - z Focus & Zoom Focus Mode ONE SH[...]

28_ setup setup White Balance The White Balance menu adjusts the balance of the screen colors under different lighting conditions. ATW : Adjusts the screen color automatically. INDOOR : Adjusts the screen color to be optimal in an indoor environment. OUTDOOR : Adjusts the screen color to be optimal in an outdoor environment. AWC : Adjusts the scree[...]

English - 29 ● SETUP Exposure The Exposure settings are to control the camera’s exposure meter. Brightness : Adjusts the screen brightness. (Over 50: Brighter, Under 50: Darker) Iris AUTO : Automatically adjusts the exposure meter. MANUAL : Enables manual adjustment of the exposure meter. (F1.6~Close: 18 levels) Shutter : Controls the camera’[...]

30_ setup setup Back Light Unlike other cameras, Samsung Techwin’s unique W-V DSP chip gives you a clear image of the subject even with bright backlight. Back Light Mode OFF : Disables the Backlight mode. HLC : Activates the High Light Compensation mode. BLC : Activates a user defi ned backlight compensation mode. HLC Setting The HLC settings se[...]

English - 31 ● SETUP Level : Adjusts the HLC sensitivity level. Mask Color : Adjusts the mask color on the high lighted area. Even if HLC is on, car license plates may not be detectable depending on the location and angle of the camera as well as the lighting condition. HLC does not function if in Digital Zoom or Freeze function is in use. BLC Se[...]

32_ setup setup AGC(Auto Gain Control) AGC (Automatic Gain Control) adjusts the camera’s gain control and the screen brightness if the camera has captured an object under low-light conditions. OFF: AGC does not function. LOW/MEDIUM/HIGH: As the level increases to HIGH, brighter the captured screen in a dark lighting. MANUAL: AGC can be fi ne tun[...]

English - 33 ● SETUP SSNR(Samsung Super Noise Reduction) SSNR significantly reduces the amount of low luminance noise. OFF : Disables the noise reduction function. LOW : Reduces only a small amount of noise, but generates almost no afterimage. MEDIUM : The most commonly used mode. Reduces a suitable amount of noise while generating a subtle after[...]

34_ setup setup SSDR(Samsung Super Dynamic Range) SSDR illuminates darker spots of an image while retaining the same light level for brighter spots to even out the overall brightness of the image with high contrast between bright and dark spots. Mode : Enables or disables SSDR. Range : Defi nes a range of SSDR. Level : Changes the contrast between[...]

English - 35 ● SETUP Day & Night The Day & Night function allows the camera to switch between the Color and B/W modes. MODE AUTO : Operates in Color mode most times, and switches to B/W mode if a low light level is detected during nighttime. COLOR : Operates in Color mode at all times. B/W : Operates in B/W mode at all times. By using the[...]

36_ setup setup Others Sync : Enables selecting Internal Synchronization or the external Line Lock. INTERNAL : Synchronizes the camera’s output timing to the internal crystal. LINE LOCK : Synchronizes the camera’s output timing to the AC adapter power to synchronize multiple cameras. This option is useful when using a switch such as Matrix Swit[...]

English - 37 ● SETUP Sequence Setting Preset This function enables the memorization of a selected location and activates the Pan, Tilt, and Zoom functions at that location. Saved locations can be recalled using the Preset Execute command. Setting Up Preset Numbers : Selecting the Preset Setting menu brings up a screen as shown below. Move the joy[...]

38_ setup setup PTZF Setting (SCU-VAC/VAC1) If you open the PTZF setup menu, you will see the following window. You can use the joystick to select a desired number. Select a preset number and press ENTER. You will move to the setup screen. Using the joystick, adjust the location of the Pan and Tilt functions and then set the Zoom and Focus command.[...]

English - 39 ● SETUP MD Function’s Prerequisite when using SCU-VAC/VAC1 (SCB-3000) : Set Alarm Out of Camera Setting – Open Camera Menu – Special Intelligence menu to ON. For SCU-VAC/VAC1, the MD function will be activated 1.5 seconds after you have moved to the preset position. For SCB-3000 - The MD function will operate normally after 1.5[...]

40_ setup setup Preset Name Setting Using this function, you can add names to preset locations. up to 12 characters. Once a name is entered, use the joystick and the Enter key to perform the Set command and save the name.  Preset Name Edit [001] [ ] 0123456789 : . ,&/ ► ©Â % −=[ ] < > ABCDEFGHIJKLMNOPQRSTUVWXYZ abcdefghijklmnopqr[...]

English - 41 ● SETUP Home Position Sets one of the currently configured preset positions as the home position. Execute Recalls a saved preset location. While in Sequence mode operation, the actual movement can be slower than the specified when moving the camera in the direction of Pan and Tilt at the same time. Clear Deletes the selected preset l[...]

42_ setup setup Swing SEQ The Swing function commands the camera to move between 2 selected locations, monitoring the route. Pan Swing : Activates the Pan function for the Swing operation. Tilt Swing : Activates the Tilt function for the Swing operation. P&T Swing : Activates both the Pan and Tilt functions for the Swing operation. Swing Settin[...]

English - 43 ● SETUP Group SEQ Selecting Group SEQ recalls a group of multiple preset locations in a consecutive manner. Up to 6 groups can be defined and up to 255 presets can be memorized for each group. Setting : Using the joystick,enter desired preset numbers into the PSET section. DWT indicates the camera’s duration of stay at a preset loc[...]

44_ setup setup PTZ Trace Maximum 4 patterns of the manual operation paths (for Pan, Tilt, Zoom and Focus) are memorized and replayed. Replay : Replays a route saved by the Trace function. You can stop replay by using the MENU (used for OSD menu) button. Memorize : The time for storing the event differs depending on the complexity of PTZ operations[...]

English - 45 ● SETUP Auto Run If there is no controller operation by the user for a certain time, the sequence operation designated by the user will be executed. Mode : HOME : Auto run Home Position (Refet to the Preset Menu.) PRESET : Auto run a selected preset number. SWING : Auto run a selected Swing mode. GROUP : Auto run a selected Group mod[...]

46_ setup setup Power On Resume and MD Dwell Time Power On Resume : This is useful when the power is disconnected and reconnected due to power failures or other power interruptions. If the camera was performing a sequence action prior to a power disconnection, the camera automatically resumes the action when the power is reconnected. MD Dwell Time [...]

English - 47 ● SETUP P/T Setting Pan/Tilt Limit The moving ranges in the Pan/Tilt directions can be limited. Position : Selecting the Position menu brings up the following screen if it is for the Pan Limit setting. Move the joystick left and right to select a movement range from the starting point to the end. END PAN ENTER: SET ESC: EXIT START PA[...]

48_ setup setup Area Setting The Area Setting menu enables selecting certain locations in the course of the Pan and Tilt operation, and then display the areas with the OSD (On Screen Display) texts when the camera passes through them. Up to 8 areas can be selected. Area Name : You can add names to selected areas. Names can be up to 12 characters an[...]

English - 49 ● SETUP Area Masking (SCU-2370/VAC/VAC1) If a monitoring location includes a highly private area, the area can be selectively excluded from monitoring. Position : As shown in the picture below, move the joystick to select the upper left corner and lower right corner of an area. END POSITION ENTER: SET ESC: EXIT START POSITION ENTER: [...]

50_ setup setup Housing Load You can select a housing load of the camera module that will be installed on the housing. Pan/Tilt movement speed depends on the camera module’s weight. For optimal speed control, set the weight of the camera module between 3 kg ~ 10 kg. M  Æ P/T Setting   Pan Limit   Tilt Limit   Area Setting ?[...]

English - 51 ● SETUP Wiper (SCU-2370/VAC/VAC1) You can use Wiper to wipe out the front glass of the housing so as to secure a clear view. To activate Wiper, set the menus below to your preference. Pump Enable: Activate or deactivate the pump function. Enable On: Activate the pump function that is connected to the wiper. Creates detailed submenu i[...]

52_ setup setup Prop. P/T (SCU-2370/VAC1) This commands the camera to change the Pan and Tilt speed automatically according to the current zoom ratio. Moving the joystick clockwise (Tele) slows down and counterclockwise (Wide) accelerates the Pan and Tilt speed, allowing detailed adjustments. Turning this “Off” executes the function the optical[...]

English - 53 ● SETUP Image Hold (SCU-2370) While in Group Trace, this will display still image of the last preset video until the camera moves to the next preset position. This is useful to help the screen observer keep sharp eyes and to monitor multiple locations within a network. Æ P/T Setting   Pan Limit   Tilt Limit   Area [...]

54_ setup setup OSD SETTING In this menu, you can configure the OSD (On Screen Display) settings. Camera ID : Displays or hides Camera ID in the upper left of the screen. Camera Name : Add a name to the camera. (First check the Note.) Preset Number : Displays or hides Preset Numbers on the screen. Preset Name : Add names to preset locations. (First[...]

English - 55 ● SETUP ALARM SETTING Setting Up Alarm Input Alarm Enable : On/Off : Enables or disables the Alarm function. MOD Enables selecting an Alarm Input method. - NO (Normally Open) Ä IN 1.2.3 IN 1.2.3 ALM GND ALARM ON ALM GND ALARM OFF - NC (Normally Closed) Ä IN 1.2.3 IN 1.2.3 ALM GND ALARM OFF ALM GND ALARM ON As shown in the picture a[...]

56_ setup setup P(Priority) : Set the priority of Alarm Inputs. If more than one alarm is simultaneously activated, the alarm with the highest priority activates before the others. Once the alarm is canceled, the next highest priority alarm activates. SEQ. : Enables setting up a sequence action for the camera in response to an alarm. Available sequ[...]

English - 57 ● SETUP Connecting the power connector and GND incorrectly to the NC/NO and COM ports may cause a short circuit and fi re, damaging the camera. The maximum power capacity of the built-in relay is 30VDC/2A, 125VAC/0.5A, and 250VAC/0.25A. Operating the camera beyond the capacity may decrease the camera’s lifespan and damage it. Aux [...]

58_ setup setup IR Illuminator Settings (SCU-2370/VAC/VAC1) With IR Illuminator, you can control the red-infrared lighting. On/Off : Activate or deactivate IR Illuminator. Time: Operates the infrared illuminator for the time specifi ed by user (1 second ~ 60 minutes). The infrared illuminator is an optional accessory (sold separately). INITIALIZE [...]

English - 59 ● SETUP Camera Default Set : (SCU-2370) This mode can be used if the camera module has been replaced and you want to keep the camera’s existing settings for the new module. To reset the camera, first replace the old module with a new camera module. When the replacement is properly installed, turn on the module, then execute this co[...]

60_ troubleshooting TROUBLESHOOTING If the product does not function properly, please see the below for trouble shooting. Problem Cause and Solution Page Controller does not work. ► Check if the camera and peripheral devices are properly connected. 20 ► Verify the setups of ID, protocol, and baud rates. 15~18 No picture is displayed on monitor.[...]

English - 61 ● TROUBLESHOOTING Problem Cause and Solution Page Picture’s colors are not good. ► Check the White Balance. 28 ► Adjust Color Menu in Image Adj. 36 ► Check if the cover or the camera lens is dirty or smudged. If it is, clean the dirt off. - The picture is flickering. ► Check if the camera is pointing directly at a fluoresce[...]

62_ troubleshooting troubleshooting Problem Cause and Solution Page When coaxial communication is not available. ► Make sure that the camera and monitor are installed within the recommended distance. - ► Use the video amplifier equivalent to coaxitron if the recommended installation distance is exceeded. - Check the Power cord’s by periods Th[...]

English - 63 ● SPECIFICATIONS PRODUCT SPECIFICATIONS <SCU-2370> NTSC PAL Imaging Device 1/4” Exview HAD CCD TV Standard NTSC PAL Total Pixels 811(H) x 508(V) 795(H) x 596(V) Effective Pixels 768(H) x 494(V) 752(H) x 582(V) Scanning System 2:1 Interlace Synchronization Internal / Line Lock Horizontal Scan Rate 15.734 KHz 15.625 KHz Vertica[...]

64_ specifications specifications NTSC PAL SSNR LOW/MEDIUM/HIGH/OFF Sens-up On/Off (Selectable limit ~ 256X ) Gain Control LOW/MEDIUM/HIGH/MANUAL/OFF White Balance ATW / INDOOR / OUTDOOR / Manual / AWC Electronic Shutter AUTO(1/60~120,000sec)/MANUAL/A.FLK AUTO(1/50~120,000sec)/MANUAL/A.FLK Serial Com. RS-422/485, Coaxial Communication Protocol SAMS[...]

English - 65 ● SPECIFICATIONS DIMENSIONS (SCU-2370/VAC/9051)[...]

66_ specifications specifications 154.7 170 9.2 135 102 102 4- 10 4- 10 18 120 72.1 72.1 6 496.8 150 80 177 120 10 34.2 420 72.1 72.1 153.7 6.5 Wall Mount y Pole Mount y[...]

MEMO[...]

MEMO[...]

MEMO[...]

MEMO[...]

MEMO[...]