Samsung SHR-1040K Bedienungsanleitung

DIGIT AL VIDEO RECORDER SHR-1040/SHR-1040K User ’ s Manual English Français Spanish SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` i[...]

English SHR-1040/1040K USER’S MANUAL ii Please be sure to keep the following in mind for the right use of the product to pre-vent proprietary risk or damage. ■ Do not use multiple plugs at once. ● This may cause abnormal heat generation or fire ■ Do not put a vase, flowerpot, cup, cosmetics, medicine, or vessel with water around you. ● Th[...]

English iii W ARNING [Battery] As wrong exchange of the battery in SHR-1040 may cause explosion, you shall use the certified battery for SHR-1040. The battery specification is as follows. -Normal V oltage : 3V -Normal Capacity : 220mAh -Continuous Standard Load : 0.2mA -Operating T emperature : -22 ˚F ~ +140 ˚F Before we star t Standards Approval[...]

English iv Safety Regulations Before we start Standards Approvals Chapter 1. Overview 1. Introduction 2. Features 3. Part Names and Functions 4. Remote Controller Chapter 2. Installation 1. Installation Environment Setup 2. Checking Product & Accessory 3. HDD Addtion Chapter 3. DIY Carmera 1. Standard Camera 2. Nightvision Camera Chapter 4. Con[...]

English v Chapter 6. Menu Setup 1. Main Setup Menu 2. Clock/Display Setup 3. Record Mode Setup 4. T itle Setup 5. Dwell T ime Setup 6. Alarm Setup 7. Event Record Mode Setup 8. T imer Record Setup 9. System Setup 10. System Information Chapter 7. Recording 1. Basic Recording 2. T imer Recording 3. Motion Recording 4. Alarm Recording 5. Stop Recordi[...]

Chapter 1. Over view English 1 SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` 1[...]

SHR-1040/1040K USER’S MANUAL 1-1 English 1 Intr oduction The SHR-1040 digital video recorder is a digital video recorder that records and plays back video and audio input from four cameras. It records and plays back each channel of video data in MPEG4 format, and audio data in installed HDD format, by using the G-723 compression standard. ● DVR[...]

1-2 English ■ Adjusts recorded data in three steps. - HIGH, NORMAL, LOW ■ Adjusts the number of record fields per second. - NTSC : 1~ MAX 30 IPS ■ Records before-event (Alarm or Motion) data based on pre-set hours. (Pre-Alarm) - 0 ~ 5SEC ■ Audio-records and plays back selected channels. ■ Offers a timer used for time record. ■ Records v[...]

SHR-1040/1040K USER’S MANUAL 1-3 English No. Name Function SHR-1040/1040K USER’S MANUAL Power LED HDD LED Displays Normal Access to HDD. Upon Access to HDD, LED repeats on and off. Displays power On/Off condition. 1 2 3 5 Alarm LED lights on when an event occurs. Rec LED Displays the record condition. ... 1 4 MODE SEARCH MENU PIP 6 4 CH1, CH2, [...]

1-4 English No. Name Function RECORD ALARM ZOOM SEQUENCE FREEZE Y ou can view X2 screen by pressing the ZOOM Button in the single screen. When you press the up/down and the left/right key in the Zoom screen, the selected Zoom Area moves. Press the Enter button to view X2 Zoom Screen of the selected area. Press the Freeze Button to freeze the curren[...]

SHR-1040/1040K USER’S MANUAL 1-5 English Caution Caution The ventilation outlet may be blocked. Do not operate the DVR on a carpet or other soft surfaces. When you operate the DVR in a cabinet or on a rack, check whether a ventilation device is properly installed. No. Name Function Connector linked to the Port DIY CAMERA. Composite video signal i[...]

1-6 English 1. RECORD Starts the recording as the setup record setting in normal record mode. 2. ID RESET The ID is reset. 3. NUMBER KEY Press to select one of single channels in Live mode. Use this for typing purposes in a numeric input mode. 4. MODE Selects split-screen . 5. FREEZE Runs the FREEZE function in live mode. 6. ZOOM Press to enlarge t[...]

Chapter 2. Installation 2 English SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 1-8[...]

SHR-1040/1040K USER’S MANUAL 2-1 English 1 Installation Envir onment Setup Do not play DVR on the carpet or other soft material to prevent clogging of the air ventilator . T o play DVR on the cabinet or rack, be sure to check the ventilation condition. Y ou should pay attention to the following before you use the product. 1. Do not use it outdoor[...]

NO Item Model Q’ty SHR-1040/XAA SHR-1040K/XAA 1 DVR SHR-1040 1 o o 2 User ’ s Manual - 1 o o 3 W arranty Card - 1 o o 4 Adapter ADP-5412WD 1 o o 5 Power Cord - 1 o o 6 Remote Controller - 1 o o 7 Battery Alkaline - 2 o o 8 SOC-N120 2 x o 9 SOC-C120 2 x o 10 Camera Bracket SBR-1 10S 4 x o 1 1 Camera Cable MCB-60 4 x o 12 Screw - 12 x o 13 Sensor[...]

SHR-1040/1040K USER’S MANUAL 2-3 English 3 HDD Addtion Y ou can install one additional hard disk drive inside the product (Max. 2 HDDs). However , there are lots of factors inside that may cause electrical shock, physical damage or malfunction. So please follow the instructions below to mount the HDD as the product couldn’ t recognize the addit[...]

2-4 English 5. Disconnect the power supply cable and the signal cable (IDE cable) from the current HDD. Push the bracket to the arrow direction as in the picture below and lift it up from the bottom. 6. Use the four screws provided (SCREW-SPECIAL: PWH,+,-,6-32UNC,L14.7(4.2),ZPC) to fix the old HDD and the additional with the bracket (Make sure you [...]

SHR-1040/1040K USER’S MANUAL 2-5 English 7. Mount the HDD-fixed bracket to its original position. (Installation is done in the reverse order of the disas- sembly . Fit the bracket (BRACKET -HDD) into the bottom hole and fix the screw). 8. When done (make sure the bracket is firmly fixed), connect the power supply cable and the signal cable (IDE) [...]

2-6 English English English 10. Use the screws (two for each side and one for the rear) in step 1 above to fix the cover . SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 2-6[...]

SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 2-7[...]

Chapter 3. DIY Carmera 3 English English English SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 2-8[...]

SHR-1040/1040K USER’S MANUAL English 3-1 1 Standard Camera Composition and Installation Method 1) ST ANDARD CAMERA COMPOSITION (SOC-C120) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to t[...]

English English English 3-2 2) INST ALLING ST ANDARD CAMERA (SOC-C120) SOC-C120 camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-1 10S). Choose an installation site that can sufficiently support the weight of the equipment to be installed. Attach the camera mount bracket to the wall or ceiling using the suppl[...]

SHR-1040/1040K USER’S MANUAL English 3-3 • Adjust the camera to target the video location and tighten the bracket handle on the camera mount bracket. Install the camera on to the male screw of the Camera Mount Bracket by rotating the camera in clockwise. • Loosen the handle by turning it in a counter-clockwise direction and then adjust the ca[...]

English English English 3-4 After positioning the monitor and installing four cameras in the desired location, please connect the CAMERA to the DVR using the CAMERA CABLE (MCB-60) as shown in the figure below . Connection status checking method : • T urn on the DVR after connecting cameras, and check if camera image is displayed. • If the DVR a[...]

SHR-1040/1040K USER’S MANUAL English 3-5 1) Before Installation SOC-N120 INTRODUCTION SOC-N120 Nightvision camera is intended to be used exclusively with those sold by this company for DIY . With the built-in IR LED and light sensor in the camera, both day monitoring and night monitoring are possible. Also, since it is designed as water-proof dai[...]

English English English 3-6 SOC-N120 Pin Configuration 1 SP- 2 VIDEO_OUT 3 GND 4 SP+ 5 ALM/AUDIO 6 VDD 3) Installation 1. Make sure the installation location is a place where 5 times (about 2.2lbs) of the total weight of the camera can be tolerated before installing the camera. 2. Connect the cable below the camera after attaching the provided Moun[...]

SHR-1040/1040K USER’S MANUAL English 3-7 a). Lens - It has a focal length of 3.8mm and makes it possiblefor you to observe a relatively wide area. b). Illumination Sensor - Detects incoming light to control the IR LED. c). IR LED - This is an infrared LED that is controlled by the illumination sensor . d). Camera fitting groove - Enables the came[...]

Chapter 4. Connecting with other device 4 English SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` 3[...]

SHR-1040/1040K USER’S MANUAL English 4-1 1 Connecting the V ideo, Audio, and Monitor SHR-1040/1040K USER’S MANUAL [SHR-1040] Caution Caution - Do not connect the V ideo In (BNC Input) and the RJ-11 (DIY Camera) input with the same channel at the same time. If connecting them simultaneously , two input signals may be mixed when outputting. This [...]

English English English 4-2 English English English English English 2 Connecting the Alarm Input/Output The Alarm IN/OUT port in the back of SHR-1040 is composed of the following elements. ● ALARM IN/OUT Connection ALM OUT G ALM IN ALM RST Name Function ALARM Input Port 1 ALM IN ALARM Output Port 2 ALM OUT On receiving an ALARM RESET signal, the [...]

Chapter 5. Basic Operation 5 English SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` 5[...]

SHR-1040/1040K USER’S MANUAL English 5-1 1 System Operation SHR-1040/1040K USER’S MANUAL ● When the adapter is connected to the DC 12V connector on the back panel, the Power LED on the front is lit. The following screen appears, and the system is booted. T urning Power On ● If no video signals exist when the system is turned on, the letter [...]

English English English 5-2 English English English 2 Live Screen Mode Full Display Screen Markers and displays on the screen are seen as below . 01/01/06 12:00:00 Play AML CAM 2 AML CAM 4 AML CAM 1 AML CAM 3 S For Live, it indicates the current time and date as set in the system. For playback, it indicates the time and date of the data recording. [...]

SHR-1040/1040K USER’S MANUAL English 5-3 3 Key Functions ● Use the CHANNEL Key when you want to view the channel in full screen. ● Press the desired channel key to view the channel in full screen. ● Audio of the channel is also selected. The S mark appears next to the title of the selected channel, and the audio of the channel is off. ● A[...]

4-4 English English English English English English English 5-4 ● The FREEZE Key is used to pause the screen. ● Press the Freeze Key to display the‘II’marker on the top right. The screen is paused. Press the Freeze Key again to make the‘II’marker disappear and clear the pause screen. 4. FREEZE KEY ● The ZOOM Key is used to X2 zoom the[...]

SHR-1040/1040K USER’S MANUAL English 5-5 ● The Sequence Key is used for automatic channel sequencing. It is enabled only in Live Mode. ● Channels are switched in sequence and the Loss channel without video signals are skipped during the Dwell T ime set by the Setup Menu. (Switch from 1channel ➝ 2 channel) ☛ Sequence in the Full Screen CH1[...]

Chapter 6. Menu Setup English 6 SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` 5[...]

SHR-1040/1040K USER’S MANUAL English 6-1 1 Main Setup Menu 1. CLOCK/DISPLA Y - Set the time, date and display items. 2. RECORD MODE - Set record-related items. 3. TITLE SETUP - Set channel titles. 4. DWELL TIME SETUP - Set the dwell time for each channel for sequence operations. 5. ALARM SETUP - Set the alarm channels and setup/alarm-related item[...]

English English English 2 Clock/Display Setup 6-2 ● Set the time, date and display items. (1) DA TE TYPE - Date can be displayed in three types, and the user can choose one among the three. [YY/MM/DD, MM/DD/YY , DD/MM/YY] (2) DA TE - Set the present data. (3) TIME [HH:MM:SS] - Set the present time. (4) DA TE/TIME - Set the date/time to ‘‘On?[...]

SHR-1040/1040K USER’S MANUAL English 6-3 (1) PICTURE QUALITY - Define the picture quality in three steps when recording. High means top quality , followed by Normal and Low . [NORMAL/HIGH/LOW] (2) PICTURE RA TE - Set the number of record fields for video In. [1/2.5/3.75/7.5/15/30] (3) DISK END MODE - When the mode is set to Stop, recording is sto[...]

English English English 6-4 (1) TITLE SETUP - Y ou can set the title of each channel as you want. - Y ou can change the title by using … , † , œ , √ , - Place the cursor on the “ ” area when the title is not displayed. Press Enter to delete OSD. 4 Title Setup ● The default settings of the title setup menu are shown as follows. ➛ 0 1 [...]

SHR-1040/1040K USER’S MANUAL English 6-5 (1) DWELL TIME SETUP - Press the Sequence button in single screen to enter Sequence Mode. Y ou can set the dwell time of each channel before switching. When the Dwell T ime is set to 0 seconds, the channel is skipped and the next channel appears. [0SEC, 1SEC, 2SEC, 3SEC.................... ~ 60SEC] 5 Dwell[...]

English English English 6-6 (1) ALARM SETUP - Set the alarm setup to ‘ON’ to enable the alarm of each camera. Set the setup to ‘OFF’ to disenable alarm. [ON/OFF] (2) HOLD TIME - When Alarm occurs, set the hold time of alarm. [5SEC, 6SEC, 7SEC, 8SEC ~ 59SEC , 1MIN, 2MIN, 3MIN ~30MIN] (3) ALARM ON TIME - Set the start time of alarm operation.[...]

SHR-1040/1040K USER’S MANUAL English 6-7 (1) EVENT RECORD ENABLE Set the EVENT RECORD ENABLE to ‘On’ to start recording when alarm occurs, and set the EVENT RECORD ENABLE to ‘Off’ to not start recording when alarm occurs. If you exit the menu after setting the EVENT RECORD ENABLE to ‘On’, the system records data whenever an alarm occu[...]

English English English 6-8 (4) MOTION DETECTION - When the Motion Detection is set to ‘ON’, the system records input video whenever a motion is detected. [ON/OFF] (5) SENSITIVITY - Y ou can set the level of sensitivity of motion detection when setting motion detection. HIGH/NORMAL/LOW . High indicates the highest level of sensitivity of motion[...]

SHR-1040/1040K USER’S MANUAL English 6-9 (1) TIMER : Set the T imer to ‘On’ to enable timer recording. [ON/OFF] (2) DA Y : Set the day of the week to record data. [MON, TUE, WED, THU, FRI, SA T , DAIL Y , SUN] (3) ST ART & END : Set the start and ending time of recording. [00:00~23:59] (4) FIELD RA TE : Set the number of fields to record [...]

English English English 6-10 (1) P ASSWORD - The default password : 4321 - Y ou can set the password to limit access to the Main Screen setup by unauthorized people. (Create a four-digit password by choosing between 1~4.) Y ou can enter the password from No. 1 to No. 4 using the corresponding channel key . Once the password is entered, you’ll see[...]

SHR-1040/1040K USER’S MANUAL English 6-1 1 (3) RECORD LOCK If you set RECORD LOCK to ON and press STOP to release the current recording, you are prompted to enter the P ASSWORD. (4) HDD ERASE If you exit the Menu after setting HDD ERASE to ON, you will see the following message that asks if you want to erase the data on the HDD. If you click OK, [...]

English English English 6-12 (6) SYSTEM ID Set the System ID to use the Remote Controller . When using more than one unit of the system, a number of systems may be operated at the same time with a single remote controller . Set the different IDs for dif ferent units. Press the System ID of the Remote Controller and use the number keys to create IDs[...]

SHR-1040/1040K USER’S MANUAL English 6-13 Once the system switched to 1 channel mode, all system functions operate in 1 Channel mode and the items of other channels in the MENU are deactivated. Once the system switched to 1 channel mode, you can just play the data in this mode and the data recorded in 4 Channel mode could not be played. On the co[...]

English English English 6-14 10 System Information (1) HDD NO Displays HDD quantity that is installed on the system. (2) CAP ACITY Displays the HDD capacity of the System. [Remaining Capacity/Entire HDD Capacity] (3) VERSION Displays the version of the System. SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 5-14[...]

English Chapter 7. Recording 7 SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` 7[...]

SHR-1040/1040K USER’S MANUAL English 7-1 1 Basic Recording 2 Timer Recording Press the Record button ( ● ) to record live video. The Rec LED is lit, and the ( ● ) mark appears on the screen. The HDD LED blinks, indicating that data is being recorded to the HDD. - Y ou can set the time and date of recording. From the menu list, enter the day o[...]

English English English 7-2 Start recording when a motion is detected in the channel and area set by the Alarm/Motion Record Setup menu. When the motion record begins, the M mark is displayed next to the channel, indicating recording is on. The Alarm In connector is located in the external in/out port of on the back panel of the system. Y ou can co[...]

SHR-1040/1040K USER’S MANUAL English 5 Stop Recording 7-3 ● Click the Stop button to stop data recording. The REC mark disappears as follows, and recording is stopped. T o stop data recording, click the STOP button. The REC mark disappears and the current recording stops as shown in the picture. However , if RECORD LOCK is set to ON, you have t[...]

Chapter 8. Search & Playback English 8 SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘` 7[...]

SHR-1040/1040K USER’S MANUAL English 8-1 1 Search Menu ● Menu Operation Move to the menu items by using the left/right and up/down buttons ( œ , √ , … , † ). The selected item is highlighted and displayed with the cursor . Press the Select button to enter the sub menu. In the sub menu, you can enter conditions for data search or select f[...]

English English English 2 Date Time Search 8-2 ● Displays the list of the data recorded in NORMAL RECORD or TIMER RECORD out of all data on the HDD. Select from the Record Event List by using up/down left/right buttons ( … , † , œ , √ ). Press the Search button after selecting from the Record Event List to start search. ● The following s[...]

SHR-1040/1040K USER’S MANUAL English 8-3 ● Displays the list of the data recorded in ALARM or MOTION RECORD out of all data on the HDD. Select from the Record Event List by using up/down left/right buttons ( … , † , œ , √ ). Press the Search button after selecting from the Alarm Event List to start search. ● The following screen appear[...]

English English English 8-4 ● Y ou can view the list on the following page by using the up/down/left/right buttons ( … , † , œ , √ ). ● Display the list of the time and date record of Power On/Of f. 6 Power Event List ● The ‘No Data’ message is displayed when there is no recorded data. ● Press the Play/Still Button to play back t[...]

SHR-1040/1040K USER’S MANUAL English 8-5 Note Note Enter the Timer Record Mode from the Menu screen, and set On/Of f before setting the time and date of recording. Y ou can also set the number of fields to be recorded per minute. ● When the system reaches the end of the HDD during playback or the end of the current data, the system will start p[...]

Chapter 9. Appendix 9 English SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 7-6[...]

NTSC 4 BNC, 4CH(RJ-1 1 DIY Camera) 2 BNC, 2RCA, 1VGA 1ch - FullScreen, Quad, Sequence, Freeze, Zoom, PIP 720 * 480 4CH(RCA), 4CH(RJ-1 1 DIY Camera) 2 CH(RCA) 1CH mode : 30IPS 4CH mode : 120IPS MPEG4 G.723 Simplex 1CH Mode, 4CH Mode 4 CH Realtime T ime Lapse, Event(Alarm,Motion), Schedule (Date/T ime) -64, -32, -16, -8,-4, -2, 1, 2, 4, 8, 16, 32, 64[...]

English English English 9-2 English 9-3 Model Name Broadcasting System Imaging Device Effective Pixels S Synchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure Audio I/O Connectors Operating T emperature Power Source Power Consumption Dimensions Weight SOC-C120 NTSC ST ANDARD 1/4” SUPER H[...]

SHR-1040/1040K USER’S MANUAL English 9-3 9-4 Model Name SOC-N120 Product type IR LED Day &Night Vision Camera Power source V oltage DC 12V from Equipment(DIY Monitor or DVR ) Brodcast System NTSC Standard Color Camera Image Device 1/4 inch IT S-HAD CCD Effective Pixel 510(H)x492(V) Scanning Method 525lines 2 : 1 Interlace Horizontal : 15,734H[...]

MAKER MODEL CAP ACITY REMARK SV0802N 80GB SV1604E 160GB SV2041N 200GB WD1600JB 160GB WD2500JB 250GB 6L160PO 160GB 6L200PO 200GB 6L250RO 250GB ST3160212ACE 160GB Attached model in shipment ST3250823A 250GB 9-4 English 2 Recommended HDD List SAMSUNG WesterN Digital Maxtor Seagate SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 8-4[...]

SHR-1040/1040K USER’S MANUAL 9-5 English 3 Outline Drawing SHR-1040/SHR-1040K-ENG 2006.4.4 11:12 AM ˘ ` 8-5[...]