Samsung SRD-1653D Bedienungsanleitung

8 CHANNEL/ 16 CHANNEL DVR User Manual SRD-873D/1653D/1673D[...]

Copyright ©2 012 Sam su ng T ec hwi n Co ., Ltd . A ll r ig ht s r es er ved . Tr a d e m a r k is th e regi ste red l og o of S amsu ng Techwi n Co., L td. Th e nam e of thi s pro du ct is t he re gis ter ed tr ade mar k of S am sung Techw in C o., Ltd . Ot her t ra dema rk s me nti one d in th is man ual a re th e regi ste red t rad ema rk o f t[...]

English _3 ● OVERVIEW IMPORT ANT SAFETY INSTRUCTIONS Read these operating instructions carefully befor e using the unit. Follow all the safety instructions listed below . Keep these operating instructions handy for future r eference. 1) Read these instructions. 2) Keep these instructions. 3) Heed all warnings. 4) Follow all instructions. 5) Do no[...]

4_ overview over view CALIFORNIA USA ONL Y This Perchlorate warning applies only to primary CR (Manganese Dioxide) Lithium coin cells in the product sold or distributed ONL Y in California USA. “Perchlorate Material - special handling may apply , See www .dtsc.ca.gov/hazardouswaste/per chlorate.” BEFORE ST ART This manual provides operational i[...]

English _5 ● OVERVIEW Operating T emperature The guaranteed operating temperature range of this pr oduct is 0°C ~ 40°C (32°F ~ 104°F). This product may not work pr operly if you run right after a long period of storage at a temperature below the guaranteed one. Prior to using a device that has been stored for a long period in low temperatur e[...]

6_ overview over view CONTENTS OVERVIEW 3 3 Important Safety Instructions 4 Before Start 6 Contents 8 Features 10 Part Names and Functions (Front) 12 Part Names and Functions (Rear) 14 Remote Control INST ALLA TION 16 16 Checking the installation environment 17 Rack Installation 17 Installing The HDD CONNECTING WITH OTHER DEVICE 22 22 Connecting Ex[...]

English _7 ● OVERVIEW SEARCH & PLA Y 80 80 Search 83 Playback WEB VIEWER 85 85 Introducing W eb Viewer 86 Connecting Web Viewer 88 Using Live Viewer 93 Controlling a Connected Network Camera 96 Using Search Viewer 99 Viewer Setup 110 About 111 Mobile Viewer BACKUP VIEWER 112 112 SEC Backup Viewer APPENDIX 114 114 Product Specification 117 Pro[...]

8_ overview over view FEA TURES The product compr esses camera inputs from 8/16 channels with H.264 video codec, and supports simultaneous recor ding and playback of 8/16-channel audio input to/from HDD. These DVRs also supports network connectivity , providing r emote monitoring from a remote PC transferring video and audio data. • Provides a co[...]

English _9 ● OVERVIEW Standards Appr ovals M  This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment g[...]

10_ overview over view P ART NAMES AND FUNCTIONS (FRONT) SRD-873D SRD-1653D/1673D Part Names Functions  Channel Used to select channel numbers directly in the Live Mode, or numbers in the numeric input mode. b REC Starts or ends the recording.  /  Step Rewind (  ) : Used for backward frame-by-frame search while in P A USE. Fast Rewind ([...]

English _11 ● OVERVIEW Part Names Functions  Direction / Select Button Used to change a value or move the cursor up/down/left/right ( ◄ ► ). Selects a menu item or executes the selected menu. Jog shuttle When a scroll bar appears in each menu, acts as a scrolling. In Play mode, - Jog : Pauses the playback and steps backward or forwar[...]

12_ overview over view P ART NAMES AND FUNCTIONS (REAR) SRD-873D SRD-1653D/1673D Part Names Functions  AUDIO IN Audio input signal port (RCA jack) and port for optional audio extension cable. b ALARM - AL A R M I N : Alar m Input p or t. SR D -87 3D : 1 ~8 C H S R D -16 5 3 D / 16 7 3 D : 1~ 16 C H - AL A R M R E SE T : Alar m Reset p or t. - AL[...]

English _13 ● OVERVIEW Part Names Functions  Power Power connection port.  VIDEO OUT Composite Video Signal Output Port (VGA type connector).  SERIAL Serial port for connecting to a POS device.  SPO T1/2 BNC type of output port for the Spot signal.  VIDEO IN Video Signal Input Port (BNC type connector).  AUDIO OUT Audio Signal O[...]

14_ overview over view REMOTE CONTROL SEARCH Displays the search menu. POWER Displays the Exit pop up screen. NUMBER [0~ + 10] Used as the numeric input keys, or displays a single channel. T/W Zooms in or out. BACKUP Displays the Backup Menu. MODE Changes the screen mode. MENU Goes to the system menu screen. Up/Down/Left/Right( ▲▼◄ ► )/ENTE[...]

English _15 ● OVERVIEW Using the Numeric buttons CHANNEL 1–9 Press each button between 1 to 9. CHANNEL 10 Press the [ +10 ] button first, then press the 0 button again within 3 seconds. CHANNEL 11–16 Press the [ +10 ] button first, then press any number between 1 to 6 within 3 seconds. Changing the Remote Control ID Remote control’ s ID and[...]

16_ installation installation Please take note of the followings before using this product. • Do not use the product outdoor . • Do not spill water or liquid in the connection part of the product. • Do not impose the system to excessive shock or force. • Do not pull out the power plug forcefully . • Do not disassemble the product on your [...]

English _17 ● INST ALLA TION RACK INST ALLA TION Install the Bracket-Rack as shown in the figure, and then fasten the screws on both sides (2 scr ews on each side).  Fix the screws not to be loosened by vibrations. Cautions when Installing in the Rack T o install multiple DVRs in the rack, make sure to separate the FOOT at the bottom of each D[...]

18_ installation installation Cautions on HDD installation 1. When adding a new HDD, make sure to fasten scr ews tightly and use appropriate parts if r equired to fix the HDD. Otherwise, the product may be damaged or does not operate pr operly . 2. Please check the HDD compatibility before adding a HDD.  Please contact your nearest dealer to obt[...]

English _19 ● INST ALLA TION 3. Attach the HDD onto the bracket, and fasten the screws on both sides to fix it. 4. Align the bracket with installed HDD to the guide of the case, push it toward the boar d, and connect to the board’ s power and data ports. 5. Y ou can check the HDD map directly on the DVR. Refer to “ Storage Device > HDD Map[...]

20_ installation installation • Installing HDD by separating the rear panel 1. Remove screws on the r ear panel, and pull the panel’ s hook to separate it. 2. Separate the HDD bracket by pushing it backwards. 3. Attach the HDD onto the bracket, and fasten the screws on both sides to fix it.[...]

English _21 ● INST ALLA TION 4. Align the bracket with installed HDD to the guide of the case, push it toward the boar d, and connect to the board’ s power and data ports. 5. Attach the rear panel, and fasten scr ews to fix it.[...]

22_ connecting with other device CONNECTING EXTERNAL DEVICES M  The following figures are based on Model SRD-1673D . Connecting the USB 1. By factory default, a USB port is provided for external connection. 2. Y ou can connect a USB HDD, USB CD/DVD player , USB memory or mouse to the USB port. 3. If a USB HDD is connected to the system, recognit[...]

English _23 ● CONNECTING WITH OTHER DEVICE Connecting POS Device Y ou can connect a POS device to the RS-232C port on the product’ s rear side when you connect it dir ectly with a RS-232C cable. Connection setup for the RS-232C port is available in “ Main Menu > Device > POS Devices ”, press the < POS Device Setup > button and s[...]

24_ connecting with other device connecting with other device SRD-1653D/1673D • ALARM IN 1 ~ 16 : Alarm Input Port • ALARM RESET : On receiving an Alarm Reset signal, the system cancels the curr ent Alarm Input and resumes sensing. • ALARM OUT 1 ~ 4 : Alarm Output Port Alarm Sensors ALARM OUT (30VDC 2A, 125V AC 0.5A MAX) ALARM IN (5mA sink) A[...]

English _25 ● CONNECTING WITH OTHER DEVICE Connecting the RS-485 Device Connect the [ TX/RX +, – ] device thr ough the back port. M  Y ou can connect and control the PTZ camera which supports the RS-485 communication.  Check if the RS-485 device is compatible with the product first.  Pay attention not to change the polarity (+/-) of th[...]

26_ connecting with other device connecting with other device Connecting to the Network using the router Connecting to Network through PPPoE Phone( PPPoE ) Line NETWORK Windows Network Viewer RJ-45 Ethernet Cable (Direct Cable) PPPoE MODEM Hub/Switcher NETWORK Broadband Router xDSL or Cable Modem xDSL or Cable Modem External Remote PC DDNS Server ([...]

English _27 ● LIVE GETTING ST ARTED Starting the system 1. Connect power cable to the product’ s rear . 2. T ouch and hold the front power button for over 2 seconds. M  It takes about 10 seconds to display the start screen after booting. 3. The boot up screen appears. Booting up may take about 1 minute, as indicates progr ess with icons. If [...]

28_ live live Shutting Down the System Y ou can shut down the system only if you have logged in to the DVR. Y ou requir e permission to shut down the system if you are not logged in as admin. 1. Hold the [ POWER ] button on the front or the r emote control for over 2 seconds, or right click and click < Shutdown >. 2. The “ Shutdown ” conf[...]

English _29 ● LIVE J  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product.  Set password for your wireless network if you use the product with a wireless router . Being not protected with password or using the default wireless router password may expose your video [...]

30_ live live LIVE SCREEN CONFIGURA TION Icons on the Live Screen Y ou can check the status or operation of the DVR with the icons on the live screen. Part Names Functions  Current Date , Time Displays the current time and date. b Login Information When you are logged in, the “ LOG ON ” icon will be displayed. c Screen Mode Displayed if the [...]

English _31 ● LIVE Part Names Functions  Video Input Status Displayed if no input is entered in the condition that the camera is set to < ON >. Nothing will be displayed on the screen if the camera is set to < OFF >.  Camera Name/ Channel Displays the camera name and the changed channel, if any .  Camera Operation Displayed i[...]

32_ live live Split Mode Menu The context sensitive menu in split mode differs, depending on the login/logout status. Menu Functions  Scene Mode Refer to “ Live Mode ”. (Page 35 ) b Spot Out1/2 Refer to “ Spot Out ”. (Page 37 ) c Audio On/Off Refer to “ Audio ON/OFF ”. (Page 38 )  Freeze Refer to “ Freeze ”. (Page 38 )  Sto[...]

English _33 ● LIVE Single Mode Menu The single mode menu is available only in Single Mode. The context sensitive menu for the One Channel mode, in Split mode is differ ent from that of the Single mode. Menu Functions  Full Screen Select and click a desired channel in Split mode to switch to the full screen of the selected channel. b PTZ Contro[...]

34_ live live View the Launcher Menu The Launcher menu appears on the bottom of the live screen. 1. In Live mode, right-click to display the context menu and select < Show Launcher >. 2. Move the cursor to the bottom and click a desired item in the Launcher menu. M  If no input is entered for 10 seconds, the menu will disappear .  The L[...]

English _35 ● LIVE LIVE MODE SRD-1653D/1673D display Live images from 16 channels in a total of 8 layout of split scr eens. Switching the screen mode T o switch the split mode, select a screen mode in the launcher menu, or right-click to select a screen mode in the context menu. Press the [ MODE ] button on the fr ont panel or the remote control [...]

36_ live live Manual Switching Press the left/right button on the fr ont panel or the remote control, or click the arr ow < ◄ / ► > key to move to the next split mode. • If pressing the right [ ► ] button in 9-split mode : 9-split (CH 1~9) mode  9-split (CH 10~16) mode  Auto Sequence • If pressing the right [ ► ] button in 4[...]

English _37 ● LIVE Switching to Single Mode When in split mode, select and double-click a desired channel to switch to its Single mode. Press the number corr esponding to a desired channel on the front panel or the r emote control to switch to its Single mode. Refer to “ Remote Control > Using the numeric buttons ”. (Page 15)  Ex : If d[...]

38_ live live ZOOM This is available only in Single Live mode. In Single mode, select a desired ar ea and use the Zoom function to enlarge it twice. 1. Select < Zoom In > in the right-click menu. Press the [ ZOOM ] button on the fr ont panel or the remote control, or simply click < > in the launcher menu. The zoom box appears. 2. Use th[...]

English _39 ● LIVE EVENT MONITORING This will display the channel in sync with a specific event (Sensor/Motion/Video Loss) if it occurs. In “ Monitor > Event Display ”, set the event monitoring to ON/OFF and specify the event display time. (Page 58 ) • If multiple events occur simultaneously , the screen will switch to a split mode. - 2~[...]

40_ main menu Y ou can setup the system properties, devices, and options for recording, event, backup and network. SYSTEM SETUP Y ou can setup Date/Time/Language, Permission, System Properties and Log. Date/Time/Language Y ou can check and setup the current Date/Time and time r elated properties, as well as the language used for the interface on th[...]

English _41 ● MAIN MENU - Time Server : Enter an IP or URL address of the time server . - Last Sync Time : Displays the most recent synchr onization time from the selected time server . - Activate as Server : Set to < Use > to allow the DVR to act as a Time Server for other DVRs. • DST : Set up Daylight Saving Time with its period to make[...]

42_ main menu main menu Permission Management Y ou can set permissions of each user over the DVR's specific function and settings. Setting the Administrator Y ou can set and change Administrator’ s ID and password. The administrator can use and set all menu items and functions. Using the mouse may help make setup easier . 1. Use the up/down [...]

English _43 ● MAIN MENU Setting the Group Y ou can create user gr oups and setup permissions for those user groups. Y ou can register a user for each gr oup in < User >. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < System > window to move to < Permission Management >, and press [ ENTER [...]

44_ main menu main menu T o restrict the user permissions If the admin restricts all permissions of an added gr oup, the users belonging to that group can access only the default minimum menus and can change the user’ s own password only . 1. Start the DVR. If all permissions are r estricted, only the Login dialog should appear . 2. Log in with a[...]

English _45 ● MAIN MENU Setting the User Y ou can add a user and edit information of a register ed user . Users can be added only if a group was cr eated in < Group > menu. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < System > window to move to < Permission Management >, and press [ ENT[...]

46_ main menu main menu • Manual Input of ID : Prompts you to enter the user ID manually for the login process. - Checked ( ) : Encloses the register ed user IDs with the [  ] symbols. Use the virtual keyboard to enter the user ID. • T ouch Button Sound : Y ou can set whether to sound beep on use of front touch buttons. • T ouch Button : Y[...]

English _47 ● MAIN MENU • Updating the Software 1. Connect a device storing the software to be updated. (It may take about 10 seconds to r ecognize the device.)  Upgradeable devices include USB memory , CD/DVD and network device.  T o update the network, the current DVR should have been connected to the network. Upgrade via the proxy serv[...]

48_ main menu main menu Settings Y ou can copy and import the DVR settings by using a storage media. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < System > window to move to < System Management >, and press [ ENTER ] button. 2. Select < Settings >. A window of storage device and load facto[...]

English _49 ● MAIN MENU Event Log Event log shows recor ded events on alarms, motion detections and video loss. It also shows the log and its timestamp. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < System > window to move to < Log Information >, and press [ ENTER ] button. 2. Select < Even[...]

50_ main menu main menu SETTING THE DEVICE Y ou can setup Camera, Storage Device, Remote Device, POS Device and Monitor . Camera Setting the Camera Y ou can set Video, Audio, Channel Name and Dwell Time of a Camera. Using the mouse may help make setup easier . 1. Press the [ MENU ] button on the r emote control or fr ont panel. 2. Use the left/righ[...]

English _51 ● MAIN MENU • CH Name : Up to 15 characters including blanks are allowed. (The first character should not be empty .)  Refer to “ Using Virtual Keyboard ”. (Page 42 ) • SEQ-Dwell Time : Y ou can set the dwell time between channels for the Live screen and Spot Out.  If set to < OFF >, the channel is not listed in th[...]

52_ main menu main menu Setting the PTZ T o use Camera’ s PTZ functions, ID and protocols of each camera and DVR should be matched. For other settings, refer to the < Remote Devices > settings. (Page 56 ) Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device > window to move to < Camera >[...]

English _53 ● MAIN MENU Storage Device Y ou can check information on storage devices. Confirming Devices Y ou can check storage devices and their free space, usage as well as status. Devices available are HDD, and USB devices (Memory , HDD, CD/DVD). Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device [...]

54_ main menu main menu Formatting Y ou can format a storage device. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device > window to move to < Storage Device >, and press [ ENTER ] button. 2. Select < Format >. A window for selection of device for formatting appears. 3. Use direction butt[...]

English _55 ● MAIN MENU HDD Alarm Y ou can set alarm settings for HDD defects such as Check Alarm Output Port, Replace Alarm Output Port, and its duration. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device > window to move to < Storage Device >, and press [ ENTER ] button. 2. Select < HD[...]

56_ main menu main menu Remote Devices Y ou can set the RS-485 communication for use of PTZ Camera and system keyboard with the DVR. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device > window to move to < Remote Device >, and press [ ENTER ] button. 2. Use direction buttons ( ◄ ► ) [...]

English _57 ● MAIN MENU • POS Device Setup : Sets the communication setups for the POS device and DVR.  It is independent to the Remote Device setup. • CH : Select the camera to be synchronized to the POS device.  If selected a channel input field, “ Sync Channel Setup ” window appears.  One POS device can be synchronized to up t[...]

58_ main menu main menu Monitor Y ou can configure information to be displayed and its format for Spot Out monitor . Setting the Monitor Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device > window to move to < Monitor >, and press [ ENTER ] button. 2. Select < Monitor >. 3. Use direction[...]

English _59 ● MAIN MENU Setting the Spot Out Y ou can set the DVR to output information / video apart from the monitor out. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Device > window to move to < Monitor >, and press [ ENTER ] button. 2. Select < Spot Out >.  The number of Spot Out[...]

60_ main menu main menu SETTING THE RECORDING Y ou can setup scheduled recor ding, event recording and other r ecording r elated settings. Recording Schedule Make your reservation on a date and time to schedule the r ecording on specified time. Using the mouse may help make setup easier . 1. Press the [ MENU ] button on the r emote control or fr on[...]

English _61 ● MAIN MENU Recording Color T ags Color Part Names Functions White No Recording No schedule / event recor ding Orange Continuous Scheduled recording only Blue Event Event recor ding only Green Both(Cont&Evnt) Both scheduled / event recor dings Each press of a selected cell will cycle thr ough < No Recording >-< Continuous[...]

62_ main menu main menu Setting Event Recording Pr operties Y ou can set each channel’ s resolution, quality and FPS for event recor dings. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Record > window to move to < REC Quality & Resolution >, and press [ ENTER ] button. 2. Select < Even[...]

English _63 ● MAIN MENU SETTING THE EVENT Y ou can set recor ding options for sensor , motion, and video loss event. Sensor Detection Y ou can set the sensor’ s operating condition and connected camera, as well as alarm output and its duration. Using the mouse may help make setup easier . 1. Press the [ MENU ] button on the r emote control or f[...]

64_ main menu main menu Motion Detection Y ou can set target detection region and motion, as well as the alarm signal output. When the motion detection region is set, it detects motion within the ar ea. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Event > window to move to < Motion Detection >,[...]

English _65 ● MAIN MENU Video Loss Detection Y ou can set the alarm to be generated on a camera disconnection, which causes a video loss. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Event > window to move to < Video Loss Detection >, and press [ ENTER ] button. A window of video loss detecti[...]

66_ main menu main menu Alarm Schedule Y ou can set the conditions and operating hours for scheduled alarms. Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Event > window to move to < Alarm Schedule >, and press [ ENTER ] button. 2. Use direction buttons ( ◄► ) to move to a desir ed ite[...]

English _67 ● MAIN MENU 3. Press the [ ENTER ] button. A backup window appears. Y ou can directly access it fr om the “ Live screen menu ”. (Page 31 ) 4. Use direction buttons ( ◄ ► ) to move to a desir ed item, and set the value. • Backup Range : Sets the < Start > and < End > time for the backup. • Channel : Sets t[...]

68_ main menu main menu NETWORK CONFIGURA TION It provides networked monitoring of Live scr een from a remote place, and supports mail forwar ding function with events. Y ou can configure the network envir onment which enables such functions. Connection Mode Y ou can set the network connection route and pr otocol. Setting the Connection Sets the pr[...]

English _69 ● MAIN MENU • IP Address, Gateway , Subnet Mask, and DNS - For < Static > : Y ou can directly input IP Addr ess, Gateway , Subnet Mask and DNS. - For < DHCP > : IP Address, Gateway , and Subnet Mask are set automatically . - For < PPPoE > : IP Address, Gateway , and Subnet Mask are set automatically . • ID , Pass[...]

70_ main menu main menu Connecting and Setting the Network Networking may differ fr om the connection method, check your environment before setting the connection mode. When no router is used • Static mode - Internet connection : Static PPPoE, leased line, and LAN environments allows connection between the DVR and remote user . - DVR Network Sett[...]

English _71 ● MAIN MENU When a router is used J  T o avoid IP address conflict with the DVR's static IP , check followings : • Setting the DVR with a static IP - Internet connection : Y ou can connect the DVR to a router which is connected to an ADSL/Cable modem or a router in a Local Ar ea Network (LAN) environment. • Setting the DVR[...]

72_ main menu main menu • Setting Router’ s Port Forwarding 1. Set the protocol to < TCP >. 2. External Port Range : Enter the TCP Port set in the < Device Port > in < Port > menu of the connected DVR. If more than one DVRs ar e connected to the router , the TCP port can be differ ent. 3. Internal PC IP Address : Enter the IP [...]

English _73 ● MAIN MENU DDNS Setting DDNS is a short form of Dynamic Domain Naming System. DNS (Domain Name System) is a service that routes a domain name consisting of user friendly characters (ex : www .google.com) to an IP address consisting of numbers (64.233.189.104). DDNS (Dynamic DNS) is a service that registers a domain name and the float[...]

74_ main menu main menu Mailing Service Y ou can send an e-mail to a DVR-register ed user at a specific time interval, or if an event occurs. M  If an event occurs with a channel where the camera’ s video is set to < OFF > or the remaining recording count is set to < OFF >, only the text notification will be sent to the applicable [...]

English _75 ● MAIN MENU Event Setting Y ou can set the interval and type of the event that will be sent to the user . Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Network > window to move to < Mailing Service >, and press [ ENTER ] button. 2. Select < Event >. 3. Use direction buttons ([...]

76_ main menu main menu Recipient Setting Y ou can add/remove a r ecipient(s) to/from the specified group and edit the gr oup if necessary . Using the mouse may help make setup easier . 1. Use the up/down buttons (  ) in < Network > window to move to < Mailing Service >, and press [ ENTER ] button. 2. Select < Recipient >. 3[...]

English _77 ● MAIN MENU CONTROLLING A PTZ DEVICE The DVR enables you to adjust the settings of a PTZ camera as well as an ordinary one to your pr eference. PTZ Device The PTZ device can be activated only if a channel in connection with the PTZ camera is selected. Getting started with PTZ The PTZ camera is available, only if a channel is selected,[...]

78_ main menu main menu Using the PTZ camera Y ou can use one camera to perform all functions of P AN, TIL T and ZOOM for monitoring multiple places and set the preset to your pr eference in a desired mode. 1. Launch the < PTZ Control > menu. As the < > icon on the bottom right corner tur ns yellow , you access the “ PTZ Control ” m[...]

English _79 ● MAIN MENU Preset Setting A preset is a set of specific target points of a PTZ camera, and up to 127 pr esets per a camera can be stored. Using the mouse may help make setup easier . 1. In PTZ Control mode, use the dir ection buttons to adjust the camera in a desired dir ection. 2. Select the < Save > key . The virtual keyboard[...]

80_ search & play SEARCH Y ou can perform the search for r ecorded data by the time or by the search criteria such as an event. Y ou can access the < Search > menu dir ectly in Live mode. 1. In Live mode, right-click any area of the scr een. The Live menu appears. 2. Select < Search >. Or , press the [ SEARCH ] button on the r emote[...]

English _81 ● SEARCH & PLA Y • Zoom In : The map enlarges in detail. It will switch in the sequence of 24 hours - 16 hours - 8 hour - 4 hours. • Zoom Out : The map will switch in the reverse or der of the detailed mode above. It will switch in the sequence of 4 hours - 8 hour - 16 hours - 24 hours. M  Double-click a desired time to zoo[...]

82_ search & play search & play POS Search Y ou can search for data in the POS device that is connected to the DVR. Y ou can use the mouse to select the related items. 1. Select < POS Search > in the < Sear ch > menu. 2. Use direction buttons ( ◄ ► ) to set the sear ch criteria and press the [ ENTER ] button.  Y ou [...]

English _83 ● SEARCH & PLA Y PLA YBACK Play Y ou can play data stored in the HDD and backup a desir ed portion of the data. Using the mouse may help make setup easier . 1. In Live mode, click < Play > in the right-click menu or < > in the launcher menu, or press the Play button on the remote contr ol or the front panel. 2. Use the[...]

84_ search & play search & play Using the Playback Button Part Names Functions  Play Timeline Indicates the current playback point, and can be used to move. b Skip Backward Moves backward by unit time. c Backward Fast Play Used for quick backward playback.  Backward Slo w Play Used for backward frame-by-frame search while in P AUSE. ?[...]

English _85 ● WEB VIEWER INTRODUCING WEB VIEWER What is Web Viewer? Web Viewer allows r emote access to your DVRs. Y ou have access to live video, archived video, PTZ contr ol (if configured), etc. Product Featur es • Remote access from a standar d browser • Supports PTZ camera controls • Supports 1, 4, 9 , 16 camera viewing formats (maximu[...]

86_ web viewer web viewer CONNECTING WEB VIEWER 1. Open your web browser and type the IP addr ess or URL of DVR into the URL address box. M  “ 192.168.1.200 ” is set to IP by default.  Set to an available IP address in IP Installer or " Network > Connection Mode ”.  The URL connection will be enabled only when the DDNS connec[...]

English _87 ● WEB VIEWER 5. When a program installation wizar d window appears, press the [ Install ] button to install the program. 6. Open the Web Viewer after installing softwar e, and log in again. Live Viewer's main screen appears when you log in successfully after installing the program.[...]

88_ web viewer web viewer USING LIVE VIEWER The Live Viewer screen consists of following : Menu Functions  Menu Selection Switches into corresponding menu screen by clicking each menu. b Address, Name, Time Displays the IP , model name, time, etc. of connected DVR. c DVR Time , PC Time Select < DVR Time > or < PC T ime > for the OSD [...]

English _89 ● WEB VIEWER Menu Functions  PTZ Controls connect PTZ camera(s). Menu Goes to the relevant menu screen of a camera, which supports OSD menu and changes the menu.  Display Pane Displays the video of camera connected to DVR. OSD Information Display  The channel number of the connected DVR ar e displayed. b Either the < DVR T[...]

90_ web viewer web viewer Split-Screen Click split mode selection button to switch to the corresponding scr een mode. T o switch to full screen mode Click < >. Current split scr een appears in full screen. Press the [ ESC ] key to exit the full scr een mode. SINGLE MODE SIXTEEN MODE NINE MODE QUAD MODE[...]

English _91 ● WEB VIEWER Changing the Live Screen Mode  16-split mode does not support “ SEQUENCE ”, “ PREVIOUS ” and “ NEXT ”. • : When this button is clicked, the previous screen appears. - In SINGLE MODE, the channel numbers are switched in reverse or der . - In QUAD MODE, the screens ar e changed like 1st 4 channels (1~4) [...]

92_ web viewer web viewer T o print a screen 1. Click < > button. 2. Print current camera’ s video image with the printer connected to the PC operating the Web Viewer . T o save as A VI 1. Click < > button. When “ A VI Setup ” window appears, select the recor d saving path and capacity . 2. Select a desired path, enter the maximum[...]

English _93 ● WEB VIEWER CONTROLLING A CONNECTED NETWORK CAMERA Controlling PTZ If PTZ camera is connected, the < > icon appears on screen. When selecting corr esponding camera channel, the PTZ tab is provided to allow you to contr ol the PTZ. Part Names Functions  Direction Adjustment Adjusts the direction of a camera. b PT Speed Adjust[...]

94_ web viewer web viewer T o set a preset 1. Click < > button to display “ Preset ” window . 2. Click < > to select a desired pr eset number . 3. Enter the name of preset. 4. Use direction keys to adjust the dir ection which camera aims at. 5. Click the < RECORD > button. T o activate the preset 1. Click < > button to d[...]

English _95 ● WEB VIEWER Controlling OSD Menu If connected network camera supports the OSD menu, press the < > to enter camera’ s menu screen to change its settings. Part Names Functions  Direction Adjustment Y ou can go to a desired menu. ENTER Selects a desired item. b Menu On/Off Y ou can On/Off camera’ s OSD menu settings. M  [...]

96_ web viewer web viewer USING SEARCH VIEWER The Search Viewer scr een consists of following :  Up to 3 users can access simultaneously . Menu Functions  Menu Selection Switches to the corresponding menu screen by clicking each menu. b Address, Name, Time Displays the IP , model name, time, etc. of connected DVR. c Split Mode Selection Selec[...]

English _97 ● WEB VIEWER Menu Functions  Play Control Adjusts current video’ s playback speed and played time position.  Recording Color Displays the corresponding color depending on recorded data type if you place your mouse cursor on that area.  Display Pane Plays corresponding data on the screen if you select a search result. Search[...]

98_ web viewer web viewer Names and Functions of Play Buttons  Moves backwar d by 10 minutes from the current playing point. b Plays in r everse at doubled speed. The playback speed is doubled up to x64 speed. c Moves backwar d by 1 second from current playing point.  Moves forwar d by 1 second from current playing point.  Plays at doubled[...]

English _99 ● WEB VIEWER VIEWER SETUP Y ou can configure the DVR settings r emotely on the network. T o configure the DVR settings, click < Setup >. System Y ou can configure the various settings of the DVR system. Date/Time/Language For more information, r efer to < Date/Time/Language > in the < System Setup > menu. (Page 40 ) [...]

100_ web viewer web viewer Holiday Y ou can set specific dates to Holidays according to your pr eferences. For more information, r efer to < Setting Holiday > in the < System Setup > menu. (Page 41 ) Permission Management For more information, r efer to < Permission Management > in the < System Setup > menu. (Page 42 ) • A[...]

English _101 ● WEB VIEWER • User Y ou can add, change or remove a user or users. • Setup Y ou can set the user permission. System Management For more information, r efer to < System Management > in the < System Setup > menu. (Page 46 ) • System Information Y ou can see information of the current system. Check the Software V ersi[...]

102_ web viewer web viewer Device Y ou can check a list of devices that are connected to the DVR and configur e the necessary settings. Click < Device > in the menu screen. For more information, r efer to “ Setting the Device ”. (Page 50 ) Camera • Camera Y ou can configure the settings of the camera that is connected to the DVR. • Pr[...]

English _103 ● WEB VIEWER Storage Device Y ou can check and change the settings of the storage device. • Device Y ou will see a list of storage devices that are connected to the DVR. Y ou can check the type, used/total, usage and status of the device. • HDD Alarm Y ou can set the alarm output channel and the alarm duration for an error . Remo[...]

104_ web viewer web viewer POS Device Y ou can set the channel, preset and communication port of the POS device that is connected to the DVR. M  Y ou cannot set to use the POS device remotely . Monitor • Monitor Y ou can configure the monitoring scr een settings and set the output system. • Mode Y ou can switch between live mode and play mod[...]

English _105 ● WEB VIEWER Record For more information, r efer to < Setting the Recording >. (Page 60 ) Recording Schedule If you set a recor ding schedule for a specific date and time, the recor ding will start at that specific time. - Apply to All CH : Click < Apply to All CH > to display the confirmation window . Event Record Durati[...]

106_ web viewer web viewer REC Quality & Resolution • Standard/Event Y ou can set the resolution, frame rate and r ecording quality for each channel. Record Option Y ou can set the Disk End Mode. Event For more information, r efer to < Setting the Event >. (Page 63 ) Sensor Detection Y ou can set the sensor operation mode and the synchr[...]

English _107 ● WEB VIEWER Motion Detection Y ou can set the motion detection mode and the sensitivity as well as the alarm output type and the duration. • Motion Region Set the target motion detection area Video Loss Detection Y ou can set the alarm output time if a video loss occurs. T ampering Detection Y ou can set whether to generate alarm [...]

108_ web viewer web viewer Alarm Schedule Y ou can schedule the alarm output according to the day of the week and the time. The default setting is Event Sync, which activates the alarm only if an event occurs. Network For more information, r efer to < Network Configuration >. (Page 68 ) Connection Mode A remote user can access the DVR via the[...]

English _109 ● WEB VIEWER DDNS Y ou can check the DDNS settings. Live T ransfer Y ou can set the network camera’ s network transfer settings. • Live T ransfer A remote user can set the image r esolution of the transferred data. Mailing Service Y ou can specify the SMTP server that sends a mail if an event occurs and set the recipient gr oup a[...]

110_ web viewer web viewer • Group Y ou can add a group to r eceive the mail if an event occurs and set the permission to receive the event mail for each gr oup. • Recipient Y ou can add a user or users who will receive the mail. SNMP Y ou can configure the settings for the SNMP pr otocol. ABOUT Click < ABOUT >. Displays the model name of[...]

English _111 ● WEB VIEWER MOBILE VIEWER What is Mobile Viewer? Mobile Viewer is management software that enables you to connect to DVR (Digital Video Recorder) r emotely and control the video playback and PTZ operations (if confi gured) in r eal time. Key Features • Remote access via Smart phone • V oice Recognition • 1-split and 4-split mo[...]

112_ backup viewer SEC BACKUP VIEWER Y ou can play a file that is backed up in the format of SEC. Backup in SEC format produces backup data file, library file and self-executable viewer file. If you run the backup file viewer , the backup data file will be automatically played. Recommended System Requirements PCs with a lower specification than the[...]

English _113 ● BACKUP VIEWER Part Names Functions  Split Screen Set the screen’ s aspect ratio to be displayed. The screen switches to the selected split screen mode. b Screen Printout Saves the current video’ s image as in an image file. Supports JPEG file format. Prints out the current screen. Y ou should have installed the appropriate p[...]

114_ appendix appendix PRODUCT SPECIFICA TION Item Details SRD-873D SRD-1653D SRD-1673D Video Inputs 16(8) composite video 0.5–1 Vpp, 75 ohm automatic termination Resolution 960x480 NTSC, 960x576 PAL / 720x480 NTSC, 720x576 PAL Live Frame rate 480fps NTSC, 400fps PAL Resolution 960x480 NTSC, 960x576 PAL(704x480 NTSC, 704x576 PAL) Multi Screen dis[...]

English _115 ● APPENDIX Item Details SRD-873D SRD-1653D SRD-1673D Network (IPv4) T ransmission speed 4CIF/2CIF/CIF 120/240/240fps NTSC, 100/200/200fps P AL 4CIF/2CIF/CIF 120/240/480fps NTSC, 100/200/400fps P AL Bandwidth Up to 32Mbps Bandwidth control Selectable Stream H.264(4CIF/2CIF/CIF Selectable) Remote users Maximum Search(3)/Live Unicast(10[...]

116_ appendix appendix Item Details SRD-873D SRD-1653D SRD-1673D Alarm Inputs / Output T erminal 16(8) Inputs (NO/NC) / T erminal 4 relay Outputs (NO/NC), Rating : 30V DC/2A, 250V AC/0.25A Remote notification Notification via e-mail Connections Ethernet 1 RJ45 10/100/1000 Base-T Serial interface RS-232/RS-485 for PTZ, Samsung System Keyboard USB US[...]

English _117 ● APPENDIX PRODUCT OVERVIEW • SRD-873D unit : mm (inches) USB 246.8 [9.72"] 265.2 [10.44"] 440.0 [17.32"] 88.0 [3.46"] 95.9 [3.78"] 1 NO COM COM COM COM NC NO NO NO 234 ALARM OUT G +- TX +- RX ALARM RESET CH1 CH2 CH3 CH4 AUDIO OUT AUDIO IN AUDIO IN CH5 ~ CH8 VIDEO IN VIDEO IN CONSOLE HDMI eSA TA VGA OUT SER[...]

118_ appendix appendix • SRD-1653D/1673D unit : mm (inches) USB 440.0 [17.32"] 246.8 [9.72"] 265.2 [10.44"] 88.0 [3.46"] 95.9 [3.78"] 1 NO COM COM COM COM NC NO NO NO 234 ALARM OUT G +- TX +- RX ALARM RESET CH1 CH2 CH3 CH4 AUDIO OUT AUDIO IN AUDIO IN CH5 ~ CH16 VIDEO IN VIDEO IN CONSOLE HDMI eSA TA VGA OUT SERIAL SPOT 2 1[...]

English _119 ● APPENDIX DEF AUL T SETTING This returns the factory default settings. The settings are made as follows; • Use System/Load Factory Default in MENU  The default settings are based on SRD-1673D .  The default password can be exposed to a hacking thread so it is recommended to change the password after installing the product. N[...]

120_ appendix appendix Category Details Factory Default Device Remote Device Baudrate 9600 Parity None Data 8 Stop bit 1 System Keyboard OFF Remote Control ON(00) POS Device OFF Monitor Monitor Event Display OFF Display All Multi CH SEQ Time 5 sec VGA/HDMI 1280X720 Spot Out Multi Spot OFF Spot Out 1 SEQ Spot Out 2 SEQ Event Display OFF Mode Live Mo[...]

English _121 ● APPENDIX Category Details Factory Default Event Motion Detection Mode OFF Sensitivity Level10(high) Alarm None Duration 10 sec Motion Region All Area Video Loss Detection Video Loss State OFF Alarm None Duration 10 sec T ampering Detection Mode OFF Sensitivity Medium Alarm None Duration 10 sec Alarm Schedule Alarm1 Event Sync Netwo[...]

122_ appendix appendix TROUBLESHOOTING Symptom Countermeasures The system does not turn on and the indicator on the front panel does not work at all.  Check if the power supply system is properly connected.  Check the system for the input voltage from the power source.  If the problem persists even after you have taken the above actions, c[...]

English _123 ● APPENDIX Symptom Countermeasures I've found that the DVR does not recognize as many disks as installed when I have connected multiple external HDDs to the DVR.  It takes time for the DVR to recognize multiple external HDDs. T ry again in a moment and if the problem (of failure to recognize as many HDDs as connected) persist[...]

124_ appendix appendix Symptom Countermeasures Recording does not work.  If your player does not display a Live image at all, that indicates recording does not work so first check if you see an image on the screen.  Recording does not work if the recording settings are not properly configured. 1) Manual Record: Press the [ REC ] button on the[...]

lighttpd is a secure, fast, compliant, and very flexible webserver that has been optimized for high-performance environments. It has a very low memory footprint compared to other webservers and takes car e of cpuload. Its advanced feature-set (FastCGI, CGI, Auth, Output-Compr ession, URL-Rewriting and many more) make lighttpd the perfect webserver [...]

publicity pertaining to distribution of the software without specific written permission. CMU AND THE REGENTS OF THE UNIVERSITY OF CALIFORNIA DISCLAIM ALL WARRANTIES WITH REGARD TO THIS SOFTW ARE, INCLUDING ALL IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS. IN NO EVENT SHALL CMU OR THE REGENTS OF THE UNIVERSITY OF CALIFORNIA BE LIABLE FOR ANY [...]

THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS “AS IS” AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANT ABILITY AND FITNESS FOR A P ARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDERS OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT , INDIRECT , INCIDENT [...]

GNU GENERAL PUBLIC LICENSE V ersion 2, June 1991 Copyright (C) 1989, 1991 Free Softwar e Foundation, Inc. 51 Franklin Street, Fifth Floor , Boston, MA 02110-1301, USA Everyone is permitted to copy and distribute verbatim copies of this license document, but changing it is not allowed. Preamble The licenses for most software ar e designed to take aw[...]

If distribution of executable or object code is made by offering access to copy from a designated place, then of fering equivalent access to copy the source code fr om the same place counts as distribution of the source code, even though thir d parties are not compelled to copy the source along with the object code. 4. Y ou may not copy , modify , [...]

Preamble The GNU General Public License is a free, copyleft license for softwar e and other kinds of works. The licenses for most software and other practical works ar e designed to take away your freedom to shar e and change the works. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change all version[...]

5. Conveying Modified Source V ersions. Y ou may convey a work based on the Program, or the modifications to produce it fr om the Program, in the form of source code under the terms of section 4, provided that you also meet all of these conditions: a) The work must carry prominent notices stating that you modified it, and giving a relevant date. b)[...]

8. T ermination. Y ou may not propagate or modify a covered work except as expressly provided under this License. Any attempt otherwise to pr opagate or modify it is void, and will automatically terminate your rights under this License (including any patent licenses granted under the third paragraph of section 11). However , if you cease all violat[...]

16. Limitation of Liability . IN NO EVENT UNLESS REQUIRED BY APPLICABLE LAW OR AGREED TO IN WRITING WILL ANY COPYRIGHT HOLDER, OR ANY OTHER P ARTY WHO MODIFIES AND/OR CONVEYS THE PROGRAM AS PERMITTED ABOVE, BE LIABLE TO YOU FOR DAMAGES, INCLUDING ANY GENERAL, SPECIAL, INCIDENT AL OR CONSEQUENTIAL DAMAGES ARISING OUT OF THE USE OR INABILITY TO USE T[...]

d) If a facility in the modified Library refers to a function or a table of data to be supplied by an application program that uses the facility , other than as an argument passed when the facility is invoked, then you must make a good faith effort to ensur e that, in the event an application does not supply such function or table, the facility sti[...]

so as to satisfy simultaneously your obligations under this License and any other pertinent obligations, then as a consequence you may not distribute the Library at all. For example, if a patent license would not permit royalty fr ee redistribution of the Library by all those who receive copies directly or indir ectly through you, then the only way[...]

(online or textual) provided with the package.Redistribution and use in source and binary forms, with or without modification, ar e permitted provided that the following conditions ar e met: 1. Redistributions of source code must r etain the copyright notice, this list of conditions and the following disclaimer . 2. Redistributions in binary form m[...]

Correct Disposal of This Product (Waste Electrical & Electronic Equipment) (Applicable in the European Union and other European countries with separate collection systems) This marking on the product, accessories or literature indicates that the product and its electronic accessories (e.g. charger , headset, USB cable) should not be disposed of[...]

SALES NETWORK SAMSUNG TECHWIN CO., L TD . Samsungtechwin R&D Center , 701, Sampyeong-dong, Bundang-gu, Seongnam-si, Gyeonggi-do, Korea, 463-400 TEL : +82-70-7147-8740~60 FAX : +82-31-8018-3745 SAMSUNG TECHWIN AMERICA Inc . 100 Challenger Rd. Suite 700 Ridgefield Park, NJ 07660 T oll Free : +1-877-213-1222 Direct : +1-201-325-6920 Fax : +1-201-3[...]