Samsung SSC-17TQ Bedienungsanleitung

COLOR DUAL QUAD OBSER V A TION SYSTEM SSC-17TQ INST ALLA TION MANUAL POWER 00403A Cover_SSC-17TQ 10/9/03 11:31 AM Page 1[...]

e-3 e-2 CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Graphic Symbol Explanation The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the[...]

e-5 e-4 Chapter 3: Setting each item function at SETUP MENU 3-1) CLOCK/DISPLAY SET MENU function setting .............e-30 3-2) CHANNEL TITLE MENU function setting .....................e-31 3-3) SYSTEM SET MENU function setting ............................e-32 3-4) EVENT SET MENU function setting ..............................e-34 3-5) EVENT LIST M[...]

e-7 e-6 1-2) System Components The system consists of the following: POWER LCD MONITOR DUAL QUAD BOX STANDARD CAMERA PIR CAMERA CAMERA BRACKET Screws (M3 x 6) Screws (M4 x 20) PLASTIC ANCHOR (HUD 5) Screws (TH M4 x 15) Screws (BH M3 x 30) POWER CORD & INSTALLATION MANUAL Rack Mount Adapter Remocon Monitor Cable RJ-45 Cable (20M) CAMERA Cable RJ[...]

e-9 1-3) CAMERA composition and installation method 1) Standard Camera composition (SOD14C) a. Lens It has a focal length of 3.8mm and makes it possible for you to observe a relatively wide area. b. Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor. c. Camera fitting groove Enables the[...]

e-11 e-10 f. Speaker It outputs the sound signal which was transfered from the monitor. • PIN configuration of the PIR CAMERA is the same as the STANDARD CAMERA. • But, PIR CAMERA does not provide ALARM JACK. 2) INSTALLING STANDARD CAMERA (SOD14C) SOD14C s camera can be attached to the wall, ceiling or shelf using the camera mount bracket (SBR-[...]

e-13 e-12 ➃ 6-pin modular jack Used to connect the camera to the monitor. <Sensor Detection Angle & Area> 1> Vertical Detection Line 2> Horizontal Detection Area ⑤ 5-Pin Terminal Block A terminal block for supplying backup power for the PIR sensor operation during power outages and for transmitting the relay signals to external [...]

e-15 e-14 ➅ Function Switch A function switch for the PIR sensor operation. ⑦ PIR Sensor A thermal heat sensor that detects infrared radiation projected by warm objects. ⑧ Microphone Capable of picking up all sound in the vicinity of the camera location and transmitting to the monitor. ⑨ Electronic Relay Output power is 350V/130mA. Camera i[...]

e-17 e-16 4. Connect the Camera connector(RJ-11) cable to the case-rear as well as the cable to be connected to the terminal. 5. Align the two holes of the case-rear to the holes of the plastic anchors, and then fasten the screw- tappings (BH M3 X 30). SCREW-TAPPING G(BH M3 x 30) SCREW-TAPPING G(BH M3 x 30) 4) INSTALLING THE PIR CAMERA (SMM-PIRCAM)[...]

e-19 e-18 4) CAMERA MOUNT BRACKET(SBR-110) & STANDARD CAMERA(SOD14C) (1) Overview CAMERA MOUNT BRACKET (SBR-110) is used to attach the camera to a wall, ceiling or shelf. (2) Installation Explains the installation of CAMERA MOUNT BRACKET as wall as the installation of the camera onto the CAMERA MOUNT BRACKET. • Choose an installation site tha[...]

e-21 e-20 1-4) CAMERA Composition and Connecting Method to SYSTEM After positioning monitor and installing three cameras to a desired location, please connect CAMERA to SYSTEM through CAMERA CABLE (MCB-60 or MCB-100) as shown in the below figure. Please check whether or not it is properly connected. Connection status checking method : • Turn on t[...]

f) Connect the A/O (HOT) terminal on the rear panel to the Alarm IN terminal of the VCR. g) Connect the A/O (COLD) terminal on the rear panel to the Ground terminal of the VCR. h) Connect the A/R terminal on the rear panel to the Alarm Reset terminal of the VCR. i) Connect the G (ground) terminal on the rear panel to the Ground terminal of the VCR.[...]

e-25 1-8) Mounting the DIGIT AL DUAL QUAD (SOQ-080N) ACCESSORY Screws (TH M4X20, 4EA) Screws (BH M3X6, 4EA) Rack Mount Adapters (2EA) Screw (BH M3X6) Screw (BH M3X6) Rack Mount Adapter Rack Mount Adapter Screw BH M4X20 Screw BH M4X20 1) Assemble the fixing holes of the BRACKET-GUIDE to the fixing grooves underneath both sides of the ASSY CABINET-BO[...]

e-27 e-26 2-4) SET - KEY Alarm function and loss function can be cancelled while the alarm or loss is working. 2-5) QUAD/P AGE- KEY Allows users to display QUAD A or QUAD B at QUAD DISPLAY MODE. • QUAD A: QUAD DISPLAY MODE from Camera 1 to Camera 4 • QUAD B: QUAD DISPLAY MODE from Camera 5 to Camera 8 2-6) LIVE/VCR- KEY Allows users to switch L[...]

e-29 e-28 2-12) ENTER- KEY As a multi functional ENTER key, it is used for 1. entering from the menu into the submenu, 2. moving into the full screen of selected channel. 2-13) MENU- KEY Display the Setup menu on the screen. Press it again to exit the Setup menu. 2-7) PIP- KEY Can be used to see the main screen while Single screen is displayed. The[...]

e-31 e-30 DATE TYPE : MM/DD/YY ↔ YY/MM/DD ↔ DD/MM/YY. DATE [MM/DD/YY] • Month(MM) : 01 ~ 12 • Day(DD) : 01 ~ 31 • Year(YY) : 00(2000) ~ 99(2099) TIME [HH:MM:SS] • Hour(HH) : 00 ~ 23 • Minute(MM) : 00 ~ 59 • Second(SS) : 00 ~ 59 3-2) CHANNEL TITLE MENU function setting You may change CHANNEL TITLE. If you click the UP/DOWN button to [...]

e-33 e-32 PIP POSITION : BOTTOM-RIGHT ↔ TOP-LEFT ↔ TOP-RIGHT ↔ BOTTOM-LEFT. • Select the PIP position among the four options listed above. BORDER COLOR : GRAY ↔ WHITE ↔ BLACK. • GRAY : BORDER LINE COLOR is displayed in GRAY in Multi Screen mode • WHITE : BORDER LINE COLOR is displayed in WHITE in Multi Screen mode • BLACK : BORDER[...]

e-35 e-34 EVENT DETECT... • Select “EVENT DETECT...” with the UP/DOWN button and click the ENTER button. Then the following screen pops up. • Use the UP/DOWN button to move to the item you want to set, and then use the ENTER and LEFT/RIGHT buttons to change the setting. • Press the MENU button after completing the settings to return to th[...]

e-37 e-36 Chapter 4: DISPLA Y MODE setting method 4-1) SINGLE SCREEN DISPLA Y The initial display mode is QUAD A mode. Use the UP and DOWN buttons to select the channel you want to view on a single screen, and then press the ENTER button. The channel you selected will be displayed on a single screen. Alternatively, you can press the corresponding c[...]

e-39 e-38 4-3) AUTO SEQUENTIAL DISPLA Y MODE Pressing on the SEQUENCE KEY on the front allows screen to automatically switch to SINGLE MODE full screen or QUAD MODE. (‘no-signal’ channels will be skipped while single screen is auto-switching.) If the DWELL TIME SETTING of SETUP MENU is set to 3 seconds and the SEQUENCE KEY is pressed at this ti[...]

e-41 e-40 08/01/03 12:30:00 08/01/03 12:30:00 CAM 2 08/01/03 12:30:00 CAM 2 08/01/03 12:30:00 CAM 2 4-5) ZOOM MODE DISPLA Y While in a single screen display, press the ZOOM key to display the zoom area. Use the LEFT, RIGHT, UP, and DOWN keys to move to the area you want to zoom in, and then press the ENTER key. The area you selected will be display[...]

e-43 e-42 Model Name Broadcasting System Imaging Device Effective Pixels Synchronization Resolution Signal Output S/N Ratio Minimum Scene Illumination Gamma Correction Lens Auto Exposure PIR Sensor Audio I/O Connectors Operating Temperature Power Source Power Consumption Dimensions Weight SMM-PIRCAM NTSC STANDARD 1/4'' SUPER HAD IT CCD 51[...]

e-44 Memo Video Input Video Output Voice Input Voice Output Alarm/Motion Features: Connected to Alarm Box/Camera Sequence Event List Display mode Horizontal Resolution Operation Temperature Dimension (W x D x H (mm)) Weight Power consumption Video system Operation Humidity Range AC Input Ranges • CAMERA 8 Input: 1.0Vp-p(CVBS), 75 Ω • VCR 1 In[...]

Memo 00403A SSC-17TQ_ENG 10/9/03 11:30 AM Page e-46[...]

Part No.: AB68-00403A (Rev.01) Printed in Korea Samsung CCTV dba GV1 1621 West Crosby, Suite 104 Carrollton, TX. 75006 PHONE : 866.492.8246 00403A Cover_SSC-17TQ 10/9/03 11:31 AM Page 2[...]