Sanyo PLC PLC-XP100BKL Bedienungsanleitung

Multimedia Pr oject or MODEL PLC-XP1 0 0L PLC-XP1 0 0BKL Owner ’ s Manual ✽ Projection lens is optional.[...]

2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durability , and ease of use. This projector utilizes built-in multimedia feat ures, a palette of 1 .07 billion colors, and matrix liquid cr ystal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Multi-use Remote Contr ol Use the remote control as wired [...]

3 T rademarks Eac h name of corporations or products in this book is either a registered trademark or a trademark of its respective corporation. T able of Cont ents Feat ur es and Design . . . . . . . . . . . . . . . . 2 T able of Contents . . . . . . . . . . . . . . . . . . 3 T o T h e O w n e r ..................... 4 Saf ety Instr uctions . . . [...]

4 C A U T I O N : T O REDUCE THE RISK OF ELECTRIC SHOCK, DO NO T REMO VE CO VER (OR BACK). NO USER-SERVICEABLE P ARTS INSIDE EX CEPT LAMP REPLACEMENT . REFER SERVICING TO QU ALIFIED SERVICE PERSONNEL. THIS S YMBOL INDICA TES THA T D ANGERO US VO L TAGE C O N S T I T UT IN G A R I S K O F E L E C T R I C SHOCK IS PRESENT WI THIN THIS UNIT . THIS S Y[...]

5 V oor de klanten in Neder land Bij dit produkt zijn bat terijen gelev erd. W anneer deze leeg zijn, moet u ze niet weggooien maar inleveren als KCA. NL All the safety and operating instructions should be read before the product is operated. Read all of the instr uctions given here and retain them f or later use. Unplug this projector from A C pow[...]

6 Openings in the cabinet are provided f or v entilation. T o ensure reliable operation of the product and to protect it from ov erheating, these openings must not be bloc ked or cov ered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken. – Do not put an y f[...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down w ard, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in down wardly inclined position, ins[...]

8 Moving the Projector Use the handle grip when moving the projector . Retract the adjustable f eet to pre v ent damage to the lens and cabinet when carr ying. When this projector is not in use for an e xtended period, put it into a suitable case to protect the projector . CA UTION IN CARR YING OR TRANSPORTING THE PROJECT OR – Do not drop or bump[...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin f ace of the plug. Should the fuse need to be replaced, an AS T A approv ed BS 1362 fuse must be used of the same rating , marked thus AS A . If the fuse cover is detac hable, ne ver use the p[...]

1 0 u e r t Front !0 o q w y i Bottom Back q Indicat ors w T op Co ver e T op Cov er Release But ton r Infr ar ed Remote Receiv er (F r ont) !6 !7 !5 !2 CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !2 T er minals and Connect ors !3 Infrar ed Remote Receiver (Bac k) !4 P o wer Cor [...]

1 1 Rear T erminal t R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). y USB CONNECT OR (Series B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to this connector with th[...]

12 w INPUT but t on Select an input source (pp.31–33). q ON/S T AND-B Y but t on T urn the projector on or of f (pp.23–24). e LENS but t on Enter the f ocus, z oom, and lens shif t adjustment mode (p.27). r P oint ed7 8 butt ons – Select an item or adjust the value in the On- Screen Menu (p.25). – Pan the image in Digital zoom +[...]

13 o t y q ST AND-B Y butt on T urn the projector of f (p.24). r ON butt on T urn the projector on (p.23). t INPUT 1 – 3 but tons Select an input source (INPU T 1 – INPU T 3) (pp.31–33). y  A UT O PC butt on A utomatically adjust the computer image to its optimum set ting (pp.28, 35). i POINT ed 7 8 but t ons – Select an item or adjus[...]

14 Remote Control !6 !4 !5 !9 !7 !8 !3 MENU but ton Open or close the On-Screen Menu (p.25). !6 ZOOM ed but t ons Zoom in and out the images (p.28). !5 D .ZOOM but t on Select the Digital zoom +/- mode and resiz e the image (p.40). @0 FOCUS but t ons A djust the f ocus (p.28). !8 FIL TER butt on Scroll the filter (p.29). !4 P -TIMER [...]

15 Remote Control Battery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. Press the lid do wnw ard and slide it. T wo AAA size bat ter ies F or correct polarity (+ and –), be sure bat tery terminals are in contact with pins in the compartment. T o insure saf e operat[...]

16 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . S witc hing the remote control codes prev ents interf erence from other remote controls when sev eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code for the projector first bef ore c hangi[...]

1 7 AD JUST ABLE FEET Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rotate the both feet cloc kwise. T o low er the projector or to retract the adjustable feet, rotate the both f eet countercloc kwise. T o correct ke y sto[...]

1 8 When replacing the lens or using an optional lens, install the lens by follo wing the instr uctions belo w . Ask the sales dealer for detailed information of the optional lens specifications. Lens Installation While pressing the top cov er release but ton on the top cov er , slide the top cover to w ard front to remov e it Shif t the lens to th[...]

1 9 NO TES ON LENS INS T ALLA TION ● Do not touc h or remove an y parts e xcept the lens and related parts. It ma y result in malfunctions, electrical shoc k, fire hazard or other accidents. ● Bef ore installing or replacing the lens, c hec k that the Model No. of the Projection L ens matc hes to the projector . ● F or details of the lens and[...]

20 Monitor Output BNC cable Connecting to a Computer (Digital and Analog RGB) Monitor Output G B R H/V V D VI-Digital cable V GA cable V GA cable USB cable USB port Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ✽ = Cables not supplied with this proje[...]

21 RGB Scart 21 -pin Output Connecting to V ideo Equipment (Video, S-V ideo) S-video cable S-video Output Composite Video Y - Pb/Cb - Pr/Cr BNC cable Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ✽ = Cables not supplied with this projector .) • Vid[...]

22 This projector uses nominal input v oltages of 1 0 0–1 20 V or 20 0– 240 V A C and it automatically selects the correct input v oltage. It is designed to work with single-phase po w er systems ha ving a grounded neutral conductor . T o reduce the risk of electrical shoc k, do not plug into any other type of pow er sy stem. If you are not sur[...]

23 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet. The LAMP indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or the ON but ton on the remote control. The LAMP indicator dims and the cooling fans start to operate. The preparation displa y appears[...]

24 Press the ON/S T AND-B Y but ton on the side control or the ST AND-B Y but ton on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or the ST AND-B Y but ton on the remote control again to turn of f the projector . The LAMP indicator lights bright and the PO WER indicator turn[...]

25 Side Contr ol SELECT butt on How to Operate the On-Screen Menu MENU butt on SELECT butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual. Use the P oint 7 8 but tons to select a Menu icon. Use the P oint ed [...]

26 Menu Bar For Computer Source For Video Source Same function as menu for Computer Source. Same function as menu for Computer Source. Guide Window Show the selected Menu of the On- Screen Menu. PC Syst em Menu Used to select computer system (p. 34). Image Select Menu Used to select an image lev el among Standard, Real, and Image 1–1 0 (p. 38). S[...]

27 Operating with Projector Control The f ollo wing lens operation can be made with the L ens but ton on the side control. Press the LENS but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Display “Lens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired poi[...]

28 Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the FREEZE but ton on the remote control to freeze the pict ure on the screen. T o cancel the FREEZE function,[...]

29 Press the NO SH O W but ton on the remote control to blac k out the image. T o restore to normal, press the NO SHO W but ton again or press any other but ton. NO SHOW but ton FIL TER but t on Press and hold the FIL TER but ton f or more than fiv e seconds to operate electrically operated filter to replace the filter . KEY ST ONE but t on Reduce [...]

30 Pointer Function P oint er ✔ Note: • Y ou can c hoose the pattern of Pointer (Ar row/Finger/Dot) in the Set ting Menu (p. 52) Y ou can mov e the P ointer of the projector with the remote control to emphasize a part of the projected image. Press the POINTER but ton to activate the P ointer function. 1 2 3 MOUSE POINTER butt on POINTER butt on[...]

31 Remote Contr ol INPUT butt ons Input Press the INPU T 1, INPU T 2, or INPUT 3 but tons on the remote control. The input source appears on the screen as you press eac h but ton. Select the connected input source. Remote Contr ol Operation Remote Contr ol butt on oper ation Side Contr ol INPUT butt on Press the INPU T but ton on the side control. [...]

32 Computer Input Source Selection WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. T he Source[...]

33 When the video input signal is connected to the Y - Pb/Cb-Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When the video input signal is connected to the S- VIDEO jac k, select S-Video. When connecting to video equipment, select the type of Video source in the Source Select Menu.[...]

34 Computer System Selection This projector automatically t unes to various types of computers based on V G A, S V GA, XG A, SXGA, SXG A+, WXGA, or UXG A (ref er to “Compatible Computer Specifications” on pages 71–72). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a [...]

35 Auto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mo ve the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed but tons [...]

36 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned b y Multi-Scan sy stem of this projector . Manual PC Adjustment enables y ou to precisely adjust se veral parameters to matc h those special signal f ormats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It a[...]

37 Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the SELECT but ton. Move the red arro w pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select R eset and press the SELECT but ton. A confirmation box appears and then select [Y es].[...]

38 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le v el preset on the projector . Standard Pi[...]

39 Screen Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT bu[...]

40 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. P ress the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. T he P anning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al zoom + mode b y pressing the D .ZOOM but ton on[...]

41 A V SY STEM MENU (VIDEO OR S-VIDEO) A V SY STEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V System Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired system and then press the SELECT but[...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Image Level Selection Mov e the red frame pointer to the des[...]

43 Screen Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2 ✔ Note: • Wide cannot be operated when “720p, ” “1 035i[...]

44 Ke ystone This function is used to store or reset the k e ystone cor rection when the A C pow er cord is unplugged. Use the P oint 7 8 but tons to switc h bet ween eac h option. Store . . . Keep the k e ystone cor rection ev en when the A C pow er cord is unplugged. Reset . . Release the ke y stone correction when the A C power cord is unplugged[...]

45 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog box. Use the P oint 7 8 but tons to adjust the set ti[...]

46 A uto pictur e contr ol Use the P oint 7 8 but tons to select the desired A uto picture control position (Of f , L1 or L2). Of f . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c heck mark if y ou do not w ant to apply the adjusted col[...]

47 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 15). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressiv e mode. Pres[...]

48 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, Italian, Spanish, P ort uguese, Dutc h, Swedish, Russian, Chinese, K orean, or J apanese. Use the P oint ed b[...]

49 This function allo ws y ou to customize the screen logo with L ogo select, Capture, and L ogo PIN code loc k functions. Logo ✔ Note: • Before capturing an image, select “ Standard ” in the Image Select Menu to capture a proper image. (pp. 38, 42) • A signal from a computer can be captured up to XGA (1 024 X 7 68). • Certain signals m[...]

50 Change the Log o PIN code loc k setting Af ter a correct L ogo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 but tons to switch On/Of f, This function pre v ents an unauthorized person from c hanging the screen logo. Of f . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo ca[...]

51 Lamp control Filter contr ol Choose the running speed of cooling f ans from the f ollowing options. Normal ....... Operate in this mode under normal conditions. Max ........... Use this mode when you want to increase the cooling ef f ect when operating the projector in high ambient temperature en vironment. F an noise is lounder than “Normal?[...]

52 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C pow er cord to the wall outlet. ✔ Note: • Be sure to turn off the projector properly (see “T urning Off the Projector” on page 24). If the projector is turned of f in the incor rect sequence, the On start function d[...]

53 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation b y unauthorized persons. . . . . . Unloc ked. . . . . . Loc k the side control but to[...]

54 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 76, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE S T AR TED . The PIN code can be c hanged to your desired f our -digit number . Press the P oint [...]

55 F act ory def ault This function ret urns all set ting values e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. F act ory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est patt er n V [...]

56 Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and may result in internal heat buildup and adversely af f ect the lif e of the projector . This projector has an electrically operated f[...]

57 T urn of f the projector , and unplug the A C pow er cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press s on the filter co ver to release the latc h and open the filter cov er . 3 Put the ne w one bac k into the position and close the filter cov er . Make sure that the filter cartridge is prop[...]

58 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box appears [...]

59 T urn of f the projector and unplug the A C power cord. L et the projector cool for at least 45 minutes. Loosen the scre w and open the lamp co ver . P ull out the lamp by using the built in handle. 1 3 Replace the lamp with a ne w one. Mak e sure that the lamp is properly and fully inserted. 4 Open the filter cov er . (p.57) 2 Connect the A C p[...]

60 ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer . When ordering, give the following inf ormation to the dealer . ● Model No. of y our pr oject or : PLC-XP1 00L/ PLC-XP1 0 0BKL ● Replacement Lamp T ype No. : PO A -LMP1 08 (Ser vice P arts No. 61 0 334 2788) Resetting the Lamp Counter Be sure to reset the Lamp counte[...]

61 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may dif f er from lamp to lamp and according to the environment of use. T here is no guarantee of the same lifetime for eac h lamp. Some lamps may fail or termina[...]

62 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blo w er to clean the lens. A void using an e xcessiv e amount of cleaner . Abrasive cleaners, solvents, or other harsh c [...]

63 The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the state of the W ARNING indicators and the PO WER indicator to take proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certain leve[...]

64 T roubleshooting Bef ore calling y our dealer or ser vice center for assistance, c hec k the items belo w once again. 1 . Make sure you ha v e properly connected the projector to peripheral equipment as described on pages 20–21 . 2. Chec k the cable connection. Make sure that all computers, video equipment, and po w er cords are properly conne[...]

65 W ARNING: High voltag es are used t o oper ate this pr ojector . Do not at tempt t o open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and explain about the problem. W e will advise you ho w to obtain se[...]

66 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Network Video RGB Go to Syst em (2) Go to Syst em (3) Go to Syst em (1) Go to Syst em (2) Video Y , Pb/Cb,Pr/Cr S-video Go to Syst em (3) Go to Syst em (2) Input 2 Input 3 Go to Syst em (1) Input H-sy[...]

67 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T rue Wide F ull screen Digital zoom + Digital zoom - PC Adjust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ Sy[...]

68 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1/Eco 2 Y es/No 1 2 languages provided. Menu Logo Lamp control Filter control Both/F ront/Bac k Normal/Max P ow er management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Re[...]

69 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector is of f . (The A C pow er cord is unplugged.) The projector is in stand-by mode. P ress the ON/S T AND-B Y but ton to turn o[...]

70 Indicat ors Pr oject or Condition PO WER green LAMP red W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector has been cooled do wn enough and the temperat ure returns to normal. When turning on the projector , the W ARNING TEMP . indicator stops blinking . Chec k and replace the filter . The lamp cannot light up. (T h[...]

71 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x400 31 .470 70.090 V GA 3 640x400 31 .470 70.090 V GA 4 640x480 37 .860 7 4.380 V GA 5 640x480 37 .860 72.81 0 V GA 6 640x480 37 .500 75.00 0 V GA 7 640x480 43.269 85.00 0 MA C LC13 640x480 34.970 66.60 0 MA C 13 640x480 35.00 0 66.670 480p 640x48[...]

72 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) D-V GA 640x480 31 .470 59.940 D-480p 720x480 31 .470 59.880 D-575p 720x575 31 .250 50.00 0 D-SV GA 80 0x600 37 .879 60.320 D-XGA 1 024x7 68 43.363 60.0 00 D-WXGA 1 1366x7 68 48.360 60.0 00 D-WXGA 2 1360x7 68 47 .70 0 60.0 00 D-WXGA 3 1 37 6x7 68 48.360 60.0 00 D-WXGA 4 1360x7 68 56.160 7[...]

73 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 1 4.56” x 7 .36” x 1 7 .32” (370 mm x 1 87 mm x 440 mm) (Not including raised portions) Net W eight 25.8 lbs (1 1 .7 kg) Feet Adjustment 0˚ to 6.5˚ P anel Resolution LCD Panel Sy stem 1 .3” TFT Activ e Matrix type, 3 panels P[...]

7 4 Optional Parts Lens Replacement The lens of this projector can be replaced with other optional lens. This f eature enables y ou to use the projector for wide v ariety of uses. F or installation and replacement of the lens, alwa y s contact the sales dealer . The projector lens must be installed or replaced by well-trained sales or service engin[...]

75 Configurations of T erminals ANAL OG/ MONITOR OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 Red Input Ground (Horiz.sync.) Green Input Sense 2 Blue Input Ground (Red) Ground (Green) Ground (Blue) 1 5 2 4 3 6 7 8 +5V P ower Horiz. sync. Ground (V ert. sync.) DDC Data Sense 0 V ert. sync. DDC Cloc k 9 13 1 0 12 1 1 14 15 CONTROL POR[...]

7 6 W rite do wn the PIN code number in the column belo w and keep it with this manual securely . If you forgot or lost the number and unable to operate the projector , contact the ser vice st ation. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the f our -digit number be c hanged, the factor y set number will be inv al[...]

77 Dimensions 3.94 (100) 14.57 (370.0) 5.75 (146) 17.32 (440) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 2.05 (52) Unit: inc h (mm) Appendix[...]

78 Serial Control Interface Appendix Appendix This projector pro vides a function to control and monitor the projector's operations b y using the R S-232C serial port. Connect a RS-232C serial cross cable to CONTR OL PORT on the projector and serial port on the PC. (See p.20) Launc h a communication sof tware pro vided with PC and setup the co[...]

79 The command is sent from PC to the projector with the format belo w; 'C' [Command] 'CR' Command: t w o c haractors (ref er to the command table below . -The projector decodes the command and ret urns the 'A CK' with the format belo w; 'A CK' 'CR' -When the projector can not decode the command, it[...]

80 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (refer to the command table below . The projector decodes the command and ret urns the 'Charactor string' with the format belo w; For mat Command F unction Projector Ret urn P[...]

KC3AL -a SANy O Electr ic Co., Ltd.[...]