Sanyo PLC-XP200L Bedienungsanleitung

Multimedia Pr oject or MODEL PLC-XP20 0L Owner ’ s Manual ✽ Projection lens is optional.[...]

2 This Multimedia Projector is designed with most advanced tec hnology for port ability , durabilit y , and ease of use. T his projector utilizes built-in multimedia feat ures, a palette of 1 .07 billion colors, and matrix liquid cr y stal display (LCD) tec hnology . ◆ Functionally Ric h ◆ Multi-use Remote Contr ol Use the remote control as wir[...]

3 T able of Cont ents Feat ures and Design ................ 2 T able of Contents .................. 3 T o The Owner ..................... 4 Saf ety Instr uctions ................. 5 Air Circulation 6 Installing the Projector in Proper Directions 7 Moving the P rojector 8 Cautions in Handling the Projector 8 Compliance ....................... 9 P ar[...]

4 Saf ety Pr ecaution W ARNING: ● THIS APP ARA TUS MUS T BE EAR THED . ● T O REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NO T EXPOSE THIS APPLIANCE T O RAIN OR MOIS TURE. – This projector produces intense light from the projection lens. Do not st are directly into the lens, other wise ey e damage could result. Be especially careful that c h[...]

5 All the safety and operating instructions should be read before the product is operated. Read all of the instructions given here and retain them for later use. Unplug this projector from A C power supply before cleaning. Do not use liquid or aerosol cleaners. Use a damp cloth for cleaning. F ollo w all warnings and instr uctions marked on the pro[...]

6 Openings in the cabinet are provided f or v entilation. T o ensure reliable operation of the product and to protect it from ov erheating , these openings must not be bloc ked or co vered. CA UTION Hot air is exhausted from the e xhaust v ent. When using or installing the projector , the follo wing precautions should be taken. – Do not put an y [...]

7 Use the projector properly in specified positions. Improper positioning may reduce the lamp lif e and result in sev ere accident or fire hazard. This projector can project the pict ure in upward, down ward, or inclined position in perpendicular direction to the horizontal plane. When installing the projector in down wardly inclined position, inst[...]

8 Moving the Projector Use the handle grip when moving the projector . Retract the adjustable f eet to prevent damage to the lens and cabinet when carr ying. When this projector is not in use for an e xtended period, put it into a suitable case to protect the projector . CA UTION IN CARR YING OR TRANSPORTING THE PR OJECT OR – Do not drop or bump [...]

9 AC P ow er Cord for the Unit ed Kingdom: This cord is already fit ted with a moulded plug incorporating a fuse, the value of whic h is indicated on the pin face of the plug. Should the fuse need to be replaced, an AST A approved BS 1 362 fuse must be used of the same rating , marked thus A S A . If the fuse cover is detac hable, nev er use the pl[...]

10 Bottom Back !6 !7 !5 !2 !1 !4 !3 P ar t Names and F unctions q Indicat ors w T op Co ver e T op Cover Release But t on r Infr ar ed Remote Receiv er (F r ont) CA UTION Hot air is exhausted from the e xhaust vent. Do not put heat-sensitiv e objects near this side. !2 T erminals and Connect ors !3 Infrar ed Remote Receiv er (Bac k) !4 Po [...]

11 Rear T erminal t R/C J ACK When using the wired remote control, connect the wired remote control to this jac k with a remote control cable (not supplied). y USB CONNECT OR (Series B) Use this connector when controlling a computer with the remote control of the projector . Connect the USB terminal of your computer to this connector with the[...]

12 Rear T erminal P art Names and F unctions !2  AUDIO M ON ITOR OU TPUT JACK T his jac k outputs the audio signal from computer or video equipment to external audio equipment (p.24). ✽ Kensingt on Secur ity Slot This slot is f or a Kensington loc k used to deter thef t of the projector . *Kensington is a registered trademark of A CCO Brands C[...]

13 q ON/S T AND-B Y button T urn the projector on or of f (pp.26–27). e MENU but t on Open or close the On-Screen Menu (p.28). r P oint ed7 8 ( V OLUME + / – ) butt ons – Select an item or adjust the value in the On- Screen Menu (p.28). – Pan the image in Digital zoom + mode (p.44). – Adjust the volume le v el (with P oint 7 8 bu[...]

14 q ST AND-B Y butt on T urn the projector of f (p.27). r ON butt on T urn the projector on (p.26). y  INPUT but ton Select a signal (pp.35–37). i SCREEN but ton Select the screen size (p.32). r Remote Control !0 !4 q !4 L- CLICK but ton A ct as the lef t mouse but ton for wireless mouse operation (p.34). e SIGNAL EMISSION indicator Light [...]

15 Remote Control !6 !5 !9 !7 !8 !8 ZOOM ed but tons Zoom in and out the images (p.32). !5 D .ZOOM button Select the Digital zoom +/- mode and resiz e the image (p.44). !9 FOCUS but tons A djust the focus (p.32). @1 FIL TER butt on Scroll the filter (p.33). @3 FREEZE but t on F reez e the pict ure on the screen (p.33). !7 KEY S T [...]

16 Remote Control Battery Installation 1 2 3 Open the bat ter y compartment lid. Install new bat teries into the compartment. Replace the compartment lid. Press the lid do wnw ard and slide it. T wo AAA size bat ter ies F or correct polarity (+ and –), be sure bat tery terminals are in contact with pins in the compartment. T o ensure saf e operat[...]

17 The eight dif f erent remote control codes (Code 1–Code 8) are assigned to this projector . Switc hing the remote control codes prev ents interference from other remote controls when se v eral projectors or video equipment next to eac h other are operated at the same time. Change the remote control code f or the projector first before c hangin[...]

18 AD JUST ABLE FEET Projection angle can be adjusted up to 6.5 degrees with the adjustable feet. Rotate the adjustable feet and tilt the projector to the proper height; to raise the projector , rotate the both feet cloc kwise. T o low er the projector or to retract the adjustable feet, rotate the both f eet countercloc kwise. T o correct ke y ston[...]

19 When replacing the lens or using an optional lens, install the lens by follo wing the instructions below . Ask the sales dealer for detailed information of the optional lens specifications. Lens Installation Shif t the lens to the center position by using the Lens shif t function (p. 30). 1 2 Removing the lens T op cov er release but ton CA UTIO[...]

20 NO TES ON LENS INS T ALLA TION ● Do not touc h or remov e any parts e x cept the lens and related parts. It may result in malfunctions, electrical shoc k, fire hazard or other accidents. ● B efore installing or replacing the lens, c hec k that the Model No. of the Projection L ens matc hes to the projector . ● F or det ails of the lens and[...]

21 Installation Some parts are not used for inst allation or replacement. Keep these parts f or later use. F ocus Loc k Screw F ocus Loc k Ring Focus adjustment Set up the projector and project image on the screen. 1. Loosen the F ocus Loc k Screw on the lens. 2. R otate the lens to obtain proper focus on center area of the screen. 3. Loc k the F o[...]

22 Monitor Output BNC cable Connecting to a Computer (Digital and Analog RGB) Monitor Output G B R H/V V D VI-Digital cable V GA cable V GA cable USB cable USB port Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ✽ = Cables not supplied with this proje[...]

23 RGB Scart 21 -pin Output Connecting to V ideo Equipment (Video, S-V ideo) S-video cable S-video Output Composite Video Y - Pb/Cb - Pr/Cr BNC cable Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ✽ = Cables not supplied with this projector .) • Vid[...]

24 Audio Output Audio cable (stereo) Connecting for Audio Signal A UDIO IN I / II Unplug the pow er cords of both the projector and external equipment from the A C outlet before connecting cables. Cables used for connection ( ✽ = Cables not supplied with this projector .) Audio Output Installation Audio cable (stereo) (R) (L) A UDIO IN I / II Ext[...]

25 This projector uses nominal input v oltages of 1 00–120 V or 20 0– 240 V A C and it automatically selects the correct input voltage. It is designed to work with single-phase po w er systems ha ving a grounded neutral conductor . T o reduce the risk of electrical shoc k, do not plug into any other type of pow er sy stem. If you are not sure o[...]

26 T urning On the Projector Connect the projector’ s A C pow er cord into an A C outlet. The LAMP/SHU TTER indicator lights red and the PO WER indicator lights green. Press the ON/S T AND-B Y but ton on the side control or the ON but ton on the remote control. The LAMP/ SHU TTER indicator dims and the cooling fans start to operate. The preparati[...]

27 Press the ON/S T AND-B Y but ton on the side control or the ST AND-B Y but ton on the remote control, and “P ow er of f?” appears on the screen. Press the ON/S T AND-B Y but ton on the side control or the ST AND-B Y but ton on the remote control again to turn of f the projector . The LAMP/SHU TTER indicator lights bright and the PO WER indic[...]

28 Side Contr ol SELECT butt on How to Operate the On-Screen Menu MENU butt on POINT butt ons On-Scr een Menu The projector can be adjusted or set via the On-Screen Menu. F or eac h adjustment and set ting procedure, refer to the respective sections in this manual. Use the P oint 7 8 but tons to select a Menu icon. Use the P oint ed but tons to sel[...]

29 Menu Bar For Computer Source For Video Source F or detailed functions of eac h menu, see “Menu T ree ” on pages 72-7 4. Basic Oper ation q w o i u y t r e !0 Show the selected Menu of the On-Screen Menu. Used to select computer system (p. 38). Used to select an image lev el among Standard, Real, and Image 1–1 0 (p. 42). Used to adjust the [...]

30 Operating with Projector Control The f ollowing lens operation can be made with the Lens but ton on the side control. Press the LENS but ton to enter eac h lens operation mode. The selected adjustment displa y appears on the screen. Display “L ens shif t” on the screen. Use the P oint ed7 8 but tons to position the screen to the desired poin[...]

31 1 2 Press the MENU but ton to displa y the On-Screen Menu. Use the P oint 7 8 but tons to move the red frame pointer to the Sound Menu icon. Press the V OLUME+/– but tons on the side control or on the remote control to adjust the volume of Audio Output. The volume dialog bo x appears on the screen for a f e w seconds. Press the MU TE but ton o[...]

32 Operating with Remote Control Using the remote control for some frequently used operations is advisable. J ust pressing one of the but tons enables you to mak e the desired operation quic kly without calling up the On-Screen Menu. Press the ZO OM but tons on the remote control to zoom in and out the image. ZOOM but t ons Press the FOCUS but tons[...]

33 Press the FREEZE but ton on the remote control to freez e the picture on the screen. T o cancel the FREEZE function, press the FREEZE but ton again or press any other but ton. FREEZE but t on FIL TER but t on Press and hold the FIL TER but ton for more than fiv e seconds to operate electrically operated filter to replace the filter . KEY S T ONE[...]

34 Pointer Function P ointer ✔ Note:  • Y oucanc hoosethepat ternofP ointer(Arrow/Finger/Dot)inthe Set tingMenu(p.56) Y ou can mov e the P ointer of the projector with the remote control to emphasize a part of the projected image. Press the POINTER but ton to activ ate the P ointer function. 1 2 3 MO[...]

35 Input Remote Contr ol butt on oper ation INPUT butt on Press the INPU T but ton on the side control or the remote control. It switc hes to INPU T 1, INPU T 2, and INPU T 3 as you press the INPU T but ton. Bef ore using the INPUT but ton on the side control or the remote control, you must select a cor rect input source by On-Screen Menu and the l[...]

36 Computer Input Source Selection WHEN SELECTING INPUT 1 (COMPUTER INPUT TERMINALS ) Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the INPU T Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired input and then press the SELECT but ton. The Source [...]

37 When the video input signal is connected to the Y - Pb/Cb-Pr/Cr jac ks, select Y , Pb/Cb, Pr/Cr . When the video input signal is connected to the VIDEO jac k, select Video. When the video input signal is connected to the S- VIDEO jac k, select S-Video. When connecting to video equipment, select the type of Video source in the Source Select Menu.[...]

38 Computer System Selection This projector automatically t unes to various types of computers based on V GA, S V GA, XG A, SXGA, SXG A+, WXGA, or UXG A (refer to “Compatible Computer Specifications” on pages 78–79). If a computer is selected as a signal source, this projector automatically detects the signal format and t unes to project a pr[...]

39 Auto PC Adjustment A uto PC Adjustment function is provided to automatically adjust Fine sync, T otal dots, Horizontal and V ertical positions to conform to y our computer . Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 buttons to mov e the red frame pointer to the PC A djust Menu icon. 1 2 Use the P oint ed but tons t[...]

40 Manual PC Adjustment Some computers employ special signal f ormats whic h may not be t uned by Multi-Scan system of this projector . Manual PC Adjustment enables y ou to precisely adjust se veral parameters to matc h those special signal f ormats. The projector has 1 0 independent memor y areas to store those parameters manually adjusted. It all[...]

41 Exit the PC A djust Menu. T o store the adjusted data, select Store and then press the SELECT but ton. Move the red ar row pointer to one of the Mode 1 to 1 0 in whic h you want to store, and then press the SELECT but ton. T o reset the adjusted dat a, select Reset and press the SELECT but ton. A confirmation box appears and then select [Y es]. [...]

42 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Normal picture le vel preset on the projector . Standard Pic[...]

43 Screen Size Adjustment Select the desired screen size that conf orms to the input signal source. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. 1 Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT bu[...]

44 Select Digital zoom +. The On-Screen Menu disappears and “D . zoom +” appears. P ress the SELECT but ton to expand the image size. Use the P oint ed7 8 but tons to pan the image. The Panning function can work only when the image is larger than the screen size. Y ou can also enter the Digit al zoom + mode by pressing the D .ZOOM but ton on th[...]

45 A V SY S TEM MENU (VIDEO OR S-VIDEO) A V SY S TEM MENU (COMPONENT VIDEO) V ideo System Selection Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the A V Sy stem Menu icon. Use the P oint ed but tons to mov e the red arro w pointer to the desired system and then press the SELECT [...]

46 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image Select Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired image lev el and then press the SELECT but ton. IMAGE SELECT MENU Image Level Selection Mov e the red frame pointer to the des[...]

47 Screen Size Adjustment Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Screen Menu icon. Use the P oint ed but tons to mov e the red frame pointer to the desired function and then press the SELECT but ton. 1 2 ✔ Note:  • Widecannotbeoperatedwhen “7[...]

48 Ke ystone This function is used to store or reset the k e ystone cor rection when the A C po wer cord is unplugged. Use the P oint 7 8 but tons to switc h bet ween eac h option. Store . . . Keep the k ey stone correction e v en when the A C po wer cord is unplugged. Reset . . Release the k ey stone correction when the A C pow er cord is unplugge[...]

49 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Image A djust Menu icon. 1 2 Use the P oint ed but tons to mov e the red frame pointer to the desired item and then press the SELECT but ton to display the adjustment dialog box. Use the P oint 7 8 but tons to adjust the set ti[...]

50 A uto pictur e contr ol Use the P oint 7 8 but tons to select the desired Auto pict ure control position (Of f , L1 or L2). Off . . . . Auto pict ure control OFF position. L1 . . . . . Auto pict ure control LEVEL 1 position. L2 . . . . . Auto pict ure control LEVEL 2 position. Clear the c hec k mark if you do not w ant to apply the adjusted colo[...]

51 Use the P oint 7 8 but tons to adjust the gamma value to obtain a bet ter balance of contrast (from 0 to 1 5). Gamma Press the P oint 7 but ton to decrease the sharpness of the image; press the P oint 8 but ton to increase the sharpness of the image (from 0 to 31). Shar pness An interlaced video signal can be display ed in progressiv e mode. Pre[...]

52 Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. 1 2 Language The language used in the On-Screen Menu is a v ailable in English, German, F renc h, Italian, Spanish, P ort uguese, Dutc h, Swedish, Russian, Chinese, K orean, or J apanese. Use the P oint ed b[...]

53 This function allo ws y ou to customize the screen logo with L ogo select, Capture, and L ogo PIN code lock functions. Logo ✔ Note:  • Beforecapturinganimage,select “ Standard ” intheImage SelectMenutocaptureaproperimage.(pp.42,46)  • Asignalfromacomputerc[...]

54 Change the Log o PIN code loc k setting Af ter a correct L ogo PIN code is entered, the follo wing dialog box appears. Use the P oint 7 8 but tons to switch On/Of f, This function pre v ents an unauthorized person from c hanging the screen logo. Off . . . . The screen logo can be c hanged freely from the Logo Menu. On . . . . The screen logo can[...]

55 Lamp control Filter contr ol Choose the running speed of cooling f ans from the following options. Normal ....... Operate in this mode under normal conditions. Max ........... Use this mode when you want to increase the cooling ef fect when operating the projector in high ambient temperature en vironment. Fan noise is louder than “Normal” . [...]

56 On start When this function is set to “ On, ” the projector will be automatically turned on just b y connecting the A C power cord to the wall outlet. ✔ Note:  • Besuretoturnofftheprojectorproperly(see “T urningOffthe Projector”onpage27).Iftheprojectoristurnedof f?[...]

57 Secur ity Ke y lock Ke y lock Secur ity Select Ke y loc k and this box appears. Choose one of the alternatives with the P oint ed but tons and select [Y es] to activate it. This function loc ks the side control and remote control but tons to prev ent operation b y unauthorized persons. . . . . . Unloc k ed. . . . . . Loc k the side control but t[...]

58 Change the PIN Code Change the PIN code CA UTION: WHEN Y OU HA VE CHANGED THE PIN CODE, WRITE DOWN A NEW PIN CODE IN COLUMN OF THE PIN CODE NO. MEMO ON P AGE 83, AND KEEP IT SECUREL Y . IF Y OU FORGET Y OUR PIN CODE, THE PROJECT OR CAN NO L ONGER BE S T ARTED. The PIN code can be c hanged to your desired f our -digit number . Press the P oint d [...]

59 Lamp counter This function is used to reset the lamp counter . When the lamp lif e reac hes a recommended lamp replacement time, the time shown in the dialog bo x t urns red and the Lamp replacement icon appears on the screen, indicating that the end of lamp lif e is approac hing . When replacing the projection lamp, reset the lamp counter . See[...]

60 F act ory def ault This function ret urns all setting v alues e xcept f or the user logo, PIN code loc k, Logo PIN code loc k, lamp counter , and filter counter to the factory default set tings. F act ory def ault Quit Exit the Set ting Menu. Select Factory default and this box appears. Select [Y es], and the next box appears. T est patt er n V [...]

61 Filter Instructions Filter prev ents dust from accumulating on the optical elements inside the projector . Should the filter becomes clogged with dust particles, it will reduce cooling fans ’ ef f ectiveness and ma y result in internal heat buildup and adversely af f ect the life of the projector . This projector has an electrically operated f[...]

62 T urn of f the projector , and unplug the A C po wer cord from the A C outlet. First, clean up the dust on the projector and around the air vents. 1 2 Press s on the filter co ver to release the latc h and open the filter cov er . 3 Put the ne w one bac k into the position and close the filter cov er . Make sure that the filter cartridge is prop[...]

63 Be sure to reset the Scroll counter af ter replacing the filter cartridge. Press the MENU but ton to display the On-Screen Menu. Use the P oint 7 8 but tons to mov e the red frame pointer to the Set ting Menu icon. Use the P oint ed but tons to mov e the red frame pointer to Filter counter and then press the SELECT but ton. A dialog box appears [...]

64 T urn of f the projector and unplug the A C power cord. L et the projector cool for at least 45 minutes. Loosen the scre w and open the lamp co ver . Pull out the lamp by using the built in handle. 1 3 Replace the lamp with a ne w one. Mak e sure that the lamp is properly and fully inserted. 4 Open the filter cov er (p.62). 2 Connect the A C po [...]

65 ORDER REPLACEMENT LAMP Replacement lamp can be ordered through your dealer . When ordering , give the follo wing information to the dealer . ● Model No. of y our pr oject or : PLC-XP200L ● Replacement Lamp T ype No. : PO A -LMP124 (Ser vice Parts No. 61 0 341 1 941) Resetting the Lamp Counter Be sure to reset the Lamp counter af ter the lamp[...]

66 This projector uses a high-pressure lamp whic h must be handled carefully and properly . Improper handling may result in accidents, injury , or create a fire hazard. ● Lamp lif etime may diff er from lamp to lamp and according to the environment of use. There is no guarantee of the same lifetime for eac h lamp. Some lamps may fail or terminate[...]

67 Unplug the A C pow er cord before cleaning. Gently wipe the projection lens with a cleaning cloth that contains a small amount of non-abrasive camera lens cleaner , or use a lens cleaning paper or commercially av ailable air blower to clean the lens. A void using an e xcessiv e amount of cleaner . Abrasiv e cleaners, solvents, or other harsh c h[...]

68 The WARNING indicators sho w the st ate of the function whic h protects the projector . Chec k the state of the W ARNING indicators and the PO WER indicator to take proper maintenance. W arning Indicators The projector is shut down and the WARNING TEMP . indicator is blinking red. When the temperature inside the projector reac hes a certain leve[...]

69 T roubleshooting Bef ore calling your dealer or ser vice center for assistance, c hec k the items below once again. 1 . Make sure you ha v e properly connected the projector to peripheral equipment as described on pages 22–24. 2. Chec k the cable connection. Make sure that all computers, video equipment, and po wer cords are properly connected[...]

70 appears on the scr een – Filter is out of scroll. Replace the filter cartridge with a new one promptly . (See pages 62 -63) The image is out of f ocus. – A djust the focus of the projector . – Chec k Projection Lens to see if it needs cleaning. ✔ Note: Moving the projector from a cool temperature location to a warm temperature location m[...]

71 W ARNING: High voltag es are used t o oper ate this pr ojector . Do not at t empt to open the cabinet. If problems still persist af ter following all operating instructions, cont act the dealer where you purc hased the projector or the ser vice center . Specify the model number and e xplain about the problem. We will advise you how to obtain ser[...]

72 Menu T ree Input RGB (PC analog) Go to Syst em (1) Input 1 Y , Pb/Cb,Pr/Cr Computer Input/V ideo Input RGB (Scart) RGB (PC digital) RGB (A V HDCP) Network Video RGB Go to Syst em (2) Go to Syst em (3) Go to Syst em (1) Go to Syst em (2) Video Y , Pb/Cb,Pr/Cr S-video Go to Syst em (3) Go to Syst em (2) Input 2 Input 3 Go to Syst em (1) Input H-sy[...]

73 Computer Input Syst em (1) Mode 1 Mode 2 Image Select Standard Real Image 1 Image 1 0 Scr een Normal T r ue Wide F ull screen Digital zoom + Digital zoom - PC A djust Auto PC adj. Fine sync. T otal dots P osition H P osition V Current mode Clamp Display area - H Display area - V Reset Mode free Store Quit 0–31 Y es/No Mode 1 Mode 1 0 Quit ✽ [...]

74 Computer Input/V ideo Input Setting Language Fan control Quit P osition/Simple Menu Blue/User/Blac k Logo select Capture Logo PIN code loc k Quit Auto/Normal/Eco 1/Eco 2 Y es/No 1 2 languages provided. Menu Logo Lamp control Filter control Both/F ront/Bac k Normal/Max P ow er management Bac kground On/Of f Logo PIN code c hange Quit RC sensor Re[...]

75 Indicators and Projector Condition Chec k the indicators for the projector condition. Indicat ors Pr ojector Condition PO WER green LAMP/ SHU TTER red/blue W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The projector is of f . (The A C pow er cord is unplugged.) The projector is in stand-by mode. P ress the ON/S T AND-B Y but[...]

76 The pr ojector is det ecting abnormal condition. Indicat ors Pr ojector Condition PO WER green LAMP/ SHU TTER red/blue W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e The temperat ure inside the projector is elevated close to the abnormally high lev el. The temperat ure inside the projector is abnormally high. The projector ca[...]

77 The pr ojector is det ecting abnormal condition. Indicat ors Pr ojector Condition PO WER green LAMP/ SHU TTER red/blue W ARNING TEMP . red W ARNING FIL TER orang e LAMP REPLA CE orang e If the Filter counter reac hed a time set in the timer set ting, a Filter replacement icon (Fig.2) appears on the screen and the W ARNING FIL TER indicator on th[...]

78 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) V GA 1 640x480 31 .470 59.880 V GA 2 720x400 31 .470 70.090 V GA 3 640x400 31 .470 70.090 V GA 4 640x480 37 .860 7 4.380 V GA 5 640x480 37 .860 72.81 0 V GA 6 640x480 37 .500 75.00 0 V GA 7 640x480 43.269 85.00 0 MA C LC13 640x480 34.970 66.60 0 MA C 13 640x480 35.00 0 66.670 480p 640x48[...]

79 ON-SCREEN DISPLA Y RESOLUTION H-Fr eq. (kHz) V -Fr eq.(Hz) D-V GA 640x480 31 .470 59.940 D-480p 720x480 31 .470 59.880 D-575p 720x575 31 .250 50.0 00 D-SV GA 800x60 0 37 .879 60.320 D-XGA 1 024x7 68 43.363 60.00 0 D-WXGA 1 1 366x7 68 48.360 60.0 00 D-WXGA 2 1 360x7 68 47 .70 0 60.00 0 D-WXGA 3 1 37 6x7 68 48.360 60.0 00 D-WXGA 4 1 360x7 68 56.16[...]

80 T echnical Specifications Mechanical Inf or mation Projector T ype Multi-media Projector Dimensions (W x H x D) 1 4.56” x 7 .36” x 1 7 .32” (370.0 mm x 1 87 .0 mm x 439.9 mm) Net Weight 25.1 lbs (1 1 .4 kg) Feet Adjustment 0˚ to 6.5˚ P anel Resolution LCD Panel Sy stem 1 .3” TFT Activ e Matrix type, 3 panels Panel Resolution 1,024 x 7 [...]

81 Optional Parts Lens Replacement The lens of this projector can be replaced with other optional lens. This f eature enables y ou to use the projector for wide v ariet y of uses. F or inst allation and replacement of the lens, alway s cont act the sales dealer . The projector lens must be installed or replaced by well-trained sales or service engi[...]

82 Configurations of T erminals ANAL OG/ MONIT OR OUT (Mini D-sub 15 pin) 5 1 2 3 4 10 9 6 7 8 15 14 13 1 1 12 CONTROL POR T CONNECT OR (D-sub 9 pin) ----- R X D T X D ----- SG ----- RTS CTS Ser ial 1 2 3 4 5 6 7 8 DIGIT AL D VI-D (D VI 24 PIN) 1 9 17 2 10 18 3 1 1 19 4 12 20 5 13 21 6 14 22 7 15 23 8 16 24 T .M.D .S. Data2– No Connect T .M.D .S.[...]

83 W rite down the PIN code number in the column below and k eep it with this manual securely . If y ou f orgot or lost the number and unable to operate the projector , contact the ser vice st ation. Factory default set No: 1 2 3 4* Factory default set No: 4 3 2 1* * Should the four -digit number be c hanged, the factor y set number will be inv ali[...]

84 Dimensions 3.94 (100) 14.57 (370) 5.75 (146) 17.32 (439.9) 13.58 (345) 4.13 (105) 5.20 (132) 4.33 (110) 4.33 (110) 7.36 (187) 6.5º MAX Screw Holes for Ceiling Mount Screw: M6 Depth: 0.393 (10.0) 2.05 (52) Unit: inc h (mm) Appendix[...]

85 Serial Control Interface Appendix This projector pro vides a function to control and monitor the projector's operations b y using the R S-232C serial port. Connect a RS-232C serial cross cable to CONTR OL PORT on the projector and serial port on the PC. (See p.22) Launc h a communication sof tware pro vided with PC and setup the communicati[...]

86 The command is sent from PC to the projector with the format belo w; 'C' [Command] 'CR' Command: t wo c haracters (ref er to the command table below . -The projector decodes the command and ret urns the 'A CK' with the format belo w; 'A CK' 'CR' -When the projector can not decode the command, it [...]

87 Status Read Command Appendix The command is sent from PC to the projector with the format belo w; 'CR' [Command] 'CR' Command: one c haracter (ref er to the command table below . The projector decodes the command and ret urns the 'Character string' with the format belo w; For mat The tables on page 86 and 87 show th[...]

KR7AL SANY O Electr ic Co., Ltd.[...]