Sears NTL99011.2 Bedienungsanleitung

Serial Number Decal Model No. NTL99011.2 Serial No. Write the serial number in the space above for reference. CAUTION Read all precautions and instruc - tions in this manual before using this equipment. Save this manual for future reference. QUESTIONS? If you have questions, or if parts are damaged or missing, DO NOT CONTACT THE STORE; please conta[...]

2 W ARNING DECAL PLACEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 IMPORT ANT PRECAUTIONS ................................................................. 3 BEFORE YOU BEGIN . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .[...]

3 IMPORT ANT PRECAUTIONS 1. Before beginning any exercise program, con- sult your physician. This is especially impor- tant for persons over age 35 or persons with pre-existing health problems. 2. It is the responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings and precautions. 3. Use the trea[...]

4 20. Never leave the treadmill unattended while it is running. Always remove the key , unplug the power cord, and press the power switch into the off position when the treadmill is not in use. (See the drawing on page 5 for the location of the power switch.) 21. Do not attempt to raise, lower , or move the treadmill until it is properly assembled.[...]

5 Thank you for selecting the revolutionary NORDICTRACK ® C 900 PRO treadmill. The C 900 PRO treadmill offers an impressive selection of fea- tures designed to make your workouts at home more enjoya ble an d effective . And when you’re not exercis - ing, the unique treadm ill can be folded up, requiring less than half the floor space of other tr[...]

6 P ART IDENTIFICA TION CHART Use the drawings below to identify small parts used for assembly . The number in parentheses below each draw- ing is the key number of the part, from the P ART LIST near the end of this manual. The number following the key number is the quantity used for assembly . Note: If a part is not in the hardware kit, check to s[...]

7 ASSEMBL Y • Assembly requires two persons. •  Placeallpartsinaclearedareaandremovethe packing materials. Do not dispose of the packing materialsuntilyounishallassemblysteps. •  Theundersideofthewalkingbeltiscoatedwith high-performance lubricant. After [...]

8 3. Identify the Left Upright (89), which is marked “Left.” Have a second person hold the Left Upright near the Base (94). See the inset drawing. T ie the wire tie in the Left Upright (89) securely around the end of the Upright Wire (81). Then, pull the other end of the wire tie until the Upright Wire is routed through the Left Upright. 81 3 8[...]

9 5. Identify the Left Base Cover (82) and the Right Base Cover (83). Slide the Left Base Cover onto the Left Upright (89). Slide the Right Base Cover onto the Right Upright (90). Do not press the Base Covers into place yet. Slide the Console Base Back (93) onto the Uprights (89, 90). 89 82 90 83 5 93 6. Attach the left handrail assembly (B) to the[...]

10 7. Start four #10 x 3/4" Screws (9) with four #10 Star W ashers (32) into the Pulse Bar (1 12) and the Left and Right Handrails (88, 87). Slide the Pulse Bar (1 12) as far in the direc- tion shown as possible, and then tighten the #10 x 3/4" Screws (9). Do not overtighten the Screws. Remove the wire tie from the Upright Wire (81). Inse[...]

11 9. Remove the two #8 x 1 1/4" Screws (107) and slide the Left Handrail Cover (79) back about 1 in. The Screws will be reattached in step 16. Note: It is not necessary to move the Left Handrail Insert (84). With the help of a second person, hold the con- sole assembly near the left handrail assembly (B). Route the Upright Wire (81) around th[...]

12 12. Set the Console (103) onto the Console Base (64). Make sure none of the wires from the Console are pinched. Attach the Console (103) to the Console Base (64) with six #8 x 1/2" Screws (1). 12 1 1 103 64 1 Wires 1 1 1. Set the console assembly onto the brackets on the Handrails (87). Be careful not to pinch any wires. Attach the console [...]

13 14. Insert the Console Base Back (93) into the hole in the console assembly and onto the top of the indicated bracket. Be careful not to pinch any wires. Tighten two #8 x 1/2" Flat Head Screws (31) into the tray on the Console Base Back (93). 14 Console Assembly 93 Bracket 13. Connect the ground wires (G), the 8-pin wires (F), the 10-pin wi[...]

14 15. T ighten nine #8 x 3/4" Screws (2) into the Console Base Back (93) in the indicated loca- tions, starting with the center Screw . 15 2 2 2 2 2 93 2 2 Start First 16. Slide the Handrail Covers (79, 80) forward until they match up with the Console Base (64). Attach the Handrail Covers with the four #8 x 1 1/4" Screws (107) that you r[...]

15 18. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plas- ticonthetreadmilldecals,removetheplastic.Toprotecttheoororcarpet,placeamatunderthetreadmill. Note: Extra hardware may be included. Keep the included hex keys in a secure pla[...]

16 HOW TO PUT ON THE HEART RA TE MONITOR The heart rate monitor consists of a chest strap and a sensor . Insert the tab on one end of the chest strap into the hole in one end of the sensor as shown. Then, press the end of the sen- sor under the buckle on the chest strap. The tab should be flush with the front of the sensor . The heart rate moni- to[...]

17 OPERA TION AND ADJUSTMENT HOW TO CONNECT THE POWER CORD Use a Surge Suppressor Your treadmill, like other electronic equipment, can be damaged by sudden voltage changes in your home’s power. Voltage surges, spikes, and noise interference can result from weather conditions or from other appli- ances being turned on or off. To decrease the risk [...]

18 ETS99931 1 (NTL9901 1, 24949) FEA TURES OF THE CONSOLE The treadmill console offers an impressive array of features designed to make your workouts more effec- tive and enjoyable. When you use the manual mode, you can change the speed and incline of the treadmill with the touch of a button. As you exercise, the console will display instant exerci[...]

19 HOW TO TURN ON THE POWER IMPORT ANT : If the treadmill has been exposed to cold temperatures, allow it to warm to room tem- perature before you turn on the power . If you do not do this, you may damage the console displays or other electrical components. Plug in the power cord (see page 17). Next, locate the power switch on the tread- mill frame[...]

20 5. Follow your progress with the displays. As you walk or run on the treadmill, the display can show the following workout information:  •   Theelapsedtime  •   Thedistancethatyouhavewalkedorrun  • Theworkoutintensitybar  •   Theapproximatenumber[...]

21 7. T urn on the fan if desired. The fan features several speed settings and an auto mode. When the auto mode is selected, the speed of the fan will automatically increase and decrease as the speed of the walking belt increases and decreases. Press the Manual fan button repeat- edly to select a fan speed or to turn off the fan. Press the Auto fan[...]

22 Note: The calorie goal is an estimate of the number of calories that you will burn during the workout. The actual number of calories that you burn will depend on your metabolic rate. In addition, if you manually change the speed or incline of the treadmill during the workout, the number of calories you burn will be affected. If the speed or incl[...]

23 When you select an iFit Live workout, the display will show the duration of the workout, the distance you will walk or run, and the approximate number of calories you will burn. The display may also show the name of the workout. If you select a com- petition workout, the display will count down to the beginning of the race. Note: Each iFit Live [...]

24 THE INFORMA TION MODE The console features an information mode that keeps track of treadmill information and allows you to person- alize console settings. T o select the information mode, hold down the Stop button while inserting the key into the console and then release the Stop button. When the information mode is selected, the following infor[...]

25 HOW T O FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL To avoid damaging the treadmill, adj us t th e i nc li ne to t he lowest position before you fold the treadmill. Then, remove the key and unplug the power cord . CAUTION: You must be able to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill. 1.  Holdthe[...]

26 TROUBLESHOOTING Most treadmill problems can be solved by following the simple steps below. Find the symptom that applies, and follow the steps listed. If further assis- tance is needed, see the front cover of this manual. SYMPTOM: The power does not turn on a. Make sure that the power cord is plugged into a surge suppressor, and that the surge s[...]

27 Locate the Reed Switch (52) and the Magnet (50) on the left side of the Pulley (49). Turn the Pulley until the Magnet is aligned with the Reed Switch. Make sure that the gap between the Magnet and the Reed Switch is about 1/8 in. (3 mm). If nec- essary, loosen the #8 x 3/4" Tek Screw (14), move the Reed Switch slightly, and then retighten t[...]

28 SYMPTOM: The walking belt is off-center or slips when walked on a. If the walking belt is off-center, rstremovethe key and UNPLUG THE POWER CORD. If the walking belt has shifted to the left, use the hex key to turn the left idler roller screw clockwise 1/2 of a turn; if the walking belt has shifted to the right, turn the left idle[...]

29 EXERCISE GUIDELINES These guidelines will help you to plan your exercise program. For detailed exercise information, obtain a reputable book or consult your physician. Remember , proper nutrition and adequate rest are essential for successful results. EXERCISE INTENSITY Whether your goal is to burn fat or to strengthen your cardiovascular system[...]

30 Key No. Qty . Description Key No. Qty . Description 1 20 #8 x 1/2" Screw 2 77 #8 x 3/4" Screw 3 1 3/8" x 2" Bolt 4 4 1/4" x 1/2" Screw 5 4 1/4" Star W asher 6 1 3/8" x 1 3/4" Bolt 7 4 3/8" x 2 3/4" Screw 8 4 3/8" x 1 1/4" Screw 9 4 #10 x 3/4" Screw 10 8 #8 x 1/2" Ground S[...]

31 Key No. Qty . Description Key No. Qty . Description Note:Specicationsaresubjecttochangewithoutnotice. For information about ordering replacement parts, see the back cover of this manual. *These parts are not illustrated. 101 1 Left Speaker Cover 102 1 Right Speaker Cover 103 1 Console Assembly 104 1 Console Frame 105 1 Co[...]

32 53 23 49 56 24 20 18 18 54 60 47 34 30 59 23 63 52 55 6 12 3 46 19 50 14 51 21 35 26 45 12 2 10 10 48 23 15 34 30 59 61 15 30 34 59 38 39 40 41 14 39 41 39 41 38 39 41 38 38 2 2 2 23 19 46 43 42 44 21 2 41 39 38 39 41 38 39 41 38 14 39 41 38 40 2 2 34 30 59 2 14 14 2 2 57 26 88 EXPLODED DRA WING A Model No. NTL9901 1.2 R1 1 1 1A[...]

33 66 10 76 77 74 2 68 75 10 2 73 65 2 2 2 72 74 2 2 2 78 2 62 2 2 2 2 2 58 2 2 2 2 2 68 68 2 2 2 67 67 33 29 69 33 70 16 114 71 33 33 71 EXPLODED DRA WING B Model No. NTL9901 1.2 R1 1 1 1A[...]

34 89 92 2 95 17 17 97 96 33 92 92 7 13 8 90 77 7 13 81 82 83 14 92 8 2 33 91 97 14 14 14 94 7 7 91 22 22 10 81 4 32 9 37 4 37 107 87 87 79 11 2 1 107 1 111 1 1 1 1 32 9 84 11 5 107 98 10 11 0 80 85 11 5 86 86 EXPLODED DRA WING C Model No. NTL9901 1.2 R1 1 1 1A[...]

35 100 25 106 106 104 105 10 103 109 115 1 64 93 27 1 1 1 1 36 1 1 1 1 101 2 118 108 28 113 28 1 109 109 2 99 2 2 2 2 1 102 25 31 2 2 2 2 2 2 2 2 2 2 2 99 2 116 117 108 108 108 108 108 109 109 109 EXPLODED DRA WING D Model No. NTL9901 1.2 R1 1 1 1A[...]

Part No. 323383 R1 1 1 1A Printed in USA © 201 1 ICON IP , Inc. ORDERING REPLACEMENT P ARTS T o order replacement parts, please see the front cover of this manual. T o help us assist you, be prepared to provide the following information when contacting us: •themodelnumberandserialnumberoftheproduct(seethefr[...]