Sharp LC-46LE732E Bedienungsanleitung

LCD TELEVIZOR U BOJI LCD TELEVIZOR U BOJI BARVNI LCD TELEVIZOR TELEWIZOR K OL OROWY LCD LCD SZÍNESTELEVÍZIÓ TELEVIZOR S BAREVNOU LCD OBRAZOVK OU TELEVÍZOR S F AREBNOU LCD OBRAZOVK OU КОЛЬ ОРОВИЙ ТЕЛЕВІЗ ОР З РІДКОКРИСТ АЛІЧНИМ ДИСПЛЕЄМ V ÄR VILINE LCD-TELER ŠĶIDRO KRISTĀLU EKRĀNA (LCD) KRĀSU TE[...]

LC-40LE730E NET LC-40LE732E NET LC-46LE730E NET LC-46LE732E NET 40”: ( ) 46”: [ ] 40”/46”: ([ ]) SPECIAL NOTE FOR USERS IN THE U.K. The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should the fuse need to be replaced, a BSI or AST A approved BS 1362 fuse marked or and of the same rating[...]

OPERA TION MANUAL Contents ....................................................................... 1 Introduction ................................................................ 2 Dear SHARP customer ................................................. 2 Important Safety Precautions ....................................... 2 Remote Control unit ......[...]

• Cleaning—Unplug the AC cord from the AC outlet befor e cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Use a soft damp cloth to gently wipe the panel when it is dirty . T o protect the panel, do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in the ca[...]

Introduction Remote control unit AV F USB REC 6 7 5 4 3 8 9 10 12 13 14 11 2 11 6 15 17 18 19 20 21 22 23 24 1 >a (Standby/On) (Page 10) 2 AT V Access conventional analogue TV mode. DTV Access digital TV mode. SA T Access satellite mode. RADIO DTV/SA T : Switch between radio and data mode. • When only data broadcasting (no radio broadcasting) [...]

TV (Front view) TV (Side and rear view) Illumination led* Introduction WARNING • Excessive sound pressure fr om earphones and headphones can cause hearing loss. • Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels. Power button Menu button Input source button V olume buttons Programme [...]

Inserting the stand  Insert the stand into the openings on the bottom of the TV (Hold the stand so it will not drop from the edge of the base area).  Insert and tighten the four screws into the four holes on the r ear of the TV . NOTE • T o detach the stand unit, perform the above steps in reverse order . Remote control unit ( g 1) ?[...]

Preparation Inserting the batteries Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become depleted and the remote contr ol unit fails to operate, replace the batteries with new “AAA” size batteries. 1 Open battery cover . 2 Insert two supplied “AAA” size batteries. • Place batt[...]

Quick guide 1 2 3 Initial installation overview Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary depending on your TV installation and connection.  Connect an antenna cable to the antenna terminal (Page 8).  If necessary , insert a CA card into the CI slot to watch scrambled broadcasts (P[...]

Quick guide Before turning on the power In order to r eceive coded digital stations, a Common Interface Module (CI Module) and a CA Card must be inserted in the CI slot of the TV . The CI Module and the CA Card ar e not supplied accessories. They are usually available fr om your dealers. Inserting the CA Card into the CI Module 1 With the side with[...]

Initial auto installation When the TV is powered on for the first time after purchase, the initial auto installation wizard appears. Follow the menus and make the necessary settings one after another . 1 Press a on the TV . • The initial auto installation wizard appears. 2 Setting the OSD language. Press a / b / c / d to select the desir ed langu[...]

W atching TV Selecting audio language E DTV/CADTV/SA T mode: Each time you press 2 the audio language switches between audio sources available. NOTE • The audio mode screen disappears in thr ee seconds. • Selectable items vary depending on the received broadcasts. E A TV mode: Each time you press 2 , the mode switches as shown in the following [...]

E Select a program 1 Select the time span -Press c / d to select the time span you want to sear ch, p ress OK. • Continue to press d to display programs in the next time span. 2 Select the desired program -Press a / b to select the desir ed program, p ress OK . • If a or b are displayed on the left of the programs, continue to press a / b to di[...]

Buttons for teletext operations Buttons Description P r / s Increase or decrease the page number . Colour (R/G/ Y/B) Select a group or block of pages displayed in the coloured brackets at the bottom of the screen by pressing the corresponding Colour (R/G/Y/B) on the remote control unit. 0–9 Directly select any page from 100 to 899 by using the 0 [...]

Connecting external devices E Before connecting ... • Be sure to turn off the TV and any devices before making any connections. • Firmly connect a cable to a terminal or terminals. • Carefully read the operation manual of each external device for possible connection types. This also helps you get the best possible audiovisual quality to maxim[...]

Connecting external devices The HDMI connections permit digital video and audio transmission via a connection cable from a player/ recor der . The digital pictur e and sound data are transmitted without data compression and ther efore lose none of their quality . Analogue/digital conversion is no longer necessary in the connected devices, which als[...]

Connecting external devices NOTE • In cases when the decoder needs to receive a signal from the TV , make sure to select the appropriate input terminal to which the decoder is connected in “Source List” (Page 10). SCART connection Example of connectable devices ● VCR ● Decoder ● DVD player/recor der Speaker/amplifier connector Connect a[...]

HDMI (DVI) Connection ø 3,5 mm stereo mini jack cable HDMI 1, 2, 3 or 4 HDMI-certified cable DVI/HDMI Cable PC connection Connecting a PC Analogue Connection ø 3,5 mm stereo mini jack cable VGA cable Y ou can select the picture size. 1 Press MENU on the r emote control,then press OK . 2 Press ▼ key to select “Advanced V ideo” , then press O[...]

Resolution Horizontal Frequency V ertical Frequency VGA 640 g 480 31,5 kHz 60 Hz VGA 720 g 400 31,47 kHz 70 Hz SVGA 800 g 600 37,9 kHz 60 Hz XGA 1.024 g 768 48,4 kHz 60 Hz WXGA 1.360 g 768 47,7 kHz 60 Hz SXGA 1.280 g 1.024 64,0 kHz 60 Hz SXGA+ 1.400 g 1.050 65,3 kHz 60 Hz UXGA 1.600 g 1.200 75,0 kHz 60 Hz 1080p 1.920 g 1.080 67,5 kHz 60 Hz PC compa[...]

AV F USB REC A V A A F US B RE C NOTE • "MENU" options differ in the selected input modes, but the operating pr ocedures are the same. • The scr eens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly fr om the actual screens. • Items in darker grey cannot be selected. Menu[...]

Basic adjustment Picture settings When the Picture Mode is set to “User” , the pictur e can be adjusted according to your pr eferences. See the following setting table. Adjustments options Selected setting ◄ Button ► Button Brightness Brightness goes down Brightness goes up Contrast Contrast goes down Contrast goes up Colour Colour intensit[...]

Audio settings When the Sound Mode is set to “User” , the sound can be adjusted according to your pr eferences. See the following setting table. Adjustments options Selected setting ◄ Button ► Button Balance Increase audio from the left speaker Increase audio from the right speaker T reble Reduce treble Increase treble Bass Reduce bass Incr[...]

Time settings This adjustment allows you to set or to display the following functions: Clock, Off/On Timer and Sleep Timer . ● ● Clock This function allows you to display the clock information (day / month / year / hour/ minute). The time and the date can’t be modified in this option. ● ● Off timer Allows you to set a time when the TV aut[...]

Channel settings Channel Channel adjustments Allows to reconfigur e the channels after initial auto installation has been completed. ● ● Auto tuning This function allows you to select the country and automatically adjusts the channels for digital, cable, satellite (Only LE732 model series) or analogue individually . ● ● DTV manual tuning Al[...]

Searching for satellite broadcasts (Only for LE732 model series) Basic adjustment ● SADTV Auto tuning Allows you to tune satellite services. 1 Press MENU on the r emote control. With ◄ / ► keys select Channel , then select Auto T uning and press OK . 2 With ▲ / ▼ / ◄ / ► keys select T uner type → SADTV . 3 Go to Start Search and pr [...]

● Language Language Allows you to select the screens language and the audio language. ● OSD Language Press a / b/c/d to select the "Menu" language, then press OK . ● Audio Languages Press a / b to select the audio language. ● Subtitle and T eletext Settings Allows you to activate/deactivate the subtitles, select the subtitles lang[...]

Y ou can display the channel information that you are watching at this moment by pressing p on the r emote control unit. Information that appears on the screen:  Program number  Program name  Age classification  Audio  Available Services: Radio / T eletext / Subtitles / Encripted   Information about the program which is being b[...]

For selecting the input type of external equipment. • If no (colour) image is displayed, try changing to another signal type. • Check the operations manual of the external equipment for the signal type. Connect an USB device to the TV as shown below . • Depending on the USB device, the TV may not be able to recognise the contained data. • U[...]

Buttons for full screen display operation Viewing pictures on full screen Buttons Description ▲ / ▼ Cursor Go to the previous/next photo in the same directory . 6 button Go back to the previous screen. Blue button Zoom: ▲ / ▼ / ◄ / ► allow to move through the pictures when zoom is activated. Y ellow button Rotates 90º the photo on scre[...]

USB / HOME MEDIA device compatibility NOTE • Progr essive format jpeg files are not supported. • Music files in USB 1.1 devices may not be played properly . • Operation using USB hubs is not guaranteed. • The external hard disc with capacity exceeding 1TB cannot be detected correctly . • Cables used to prolong the USB device must be certi[...]

HDMI devices Controlling HDMI devices using HDMI CEC E What is HDMI CEC? Using the HDMI CEC protocol, you can interactively operate compatible system devices (A V amplifier , DVD player/recor der , Blu-ray player/r ecorder) using a single remote contr ol unit. NOTE • HDMI CEC does not work while using USB REC functions. E What you can do with HDM[...]

HDMI devices Connecting a player/recorder only Player/Recorder  HDMI-certified cable (commercially available) HDMI CEC (Consumer Electronics Control) menu Go to Menu > Settings > Input Settings > HDMI CEC and select the menu you want to set. Set to On to enable HDMI CEC functions. If this is activated, the one touch play function is ena[...]

NOTE • If you choose a wired connection to the r outer , you need an ETHERNET cable (not included, commercially available). • If you do not have a broadband internet connection, consult the store where you pur chased your TV or ask your internet service provider or telephone company . • An ETHERNET and wireless connection cannot be used at th[...]

Network Setup ● How to connect 1 Switch on your router befor e starting the network installation. 2 Connect the AN-WUD630 USB adapter ( sold separately) to the USB Wi-Fi port on the TV . • Do not use a wireless LAN adapter other than the AN- WUD630 Sharp wireless LAN adapter , as operations cannot be guaranteed. • If your wireless network is [...]

Network Setup The illustrations on this page are for explanation purposes. They are subject to change without notice. E Display the AQUOS NET screen Press NET on remote contr ol or select AQUOS NET on Multimedia menu to open AQUOS NET home page. Basic Operation AQUOS NET is the feature that of fers our Inter net connection set to play easily digita[...]

Home Network Network Setup This TV set can be connected to your home network through the Ethernet terminal or via Wi-Fi. • Media Streaming support for existing DLNA servers on your Home Network. In fact, user can play movies, listen to music or view pictures in the easiest way , even from playlist fi les (Media Player). E How to access to home n[...]

USB REC function USB REC function allows you to recor d a TV programme and watch it later . Also allows you to temporize one or more r ecording and they will be available for a later on view . These recor dings will not be lost when the TV is tur ned off. USB REC requir es an exter nal USB 2.0 memory , always connected and previously configur ed to[...]

● ● Recordings and timings 1. The timings will be stored in the USB REC Programmed r ecording list in the USB REC menu, pending to be executed. 2. All the fi nished recor dings are available on the “ USB REC Recorded list ” in the USB REC menu. Select the fi le you want to view and press OK • Press OK to playback the programme being rec[...]

Enjoying 3D image viewing Viewing 3D images 1 Select the 3D source (HDMI). 2 Press "3D" button on Remote Contr ol. NOTE • The TV screen may temporarily become black when the TV is trying to detect a 3D image signal and when switching from 3D to 2D mode. Receiving a 3D image signal that can be detected automatically The image signal may [...]

Enjoying 3D image viewing Configuring the TV settings to enhance 3D image viewing Y ou can adjust the brightness of the TV for 3D image viewing. 1 Press 3D button while you are viewing 3D image. 2 Press b to select 3D Brightness and press OK. 3 T o adjust de brightness press a/b to choose between the options. Item High The screen brightens Medium L[...]

Enjoying 3D image viewing T roubleshooting - 3D Images Problem Possible solution • 3D images are not displayed. • Is “3D auto change” set to “No”? Press 3D to switch to 3D mode. • If “3D auto change” is set to “Y es” but no 3D images are displayed, check the display format of the content being viewed. Some 3D image signals may[...]

Appendix Information on the software license for this pr oduct Software composition The software included in this product is comprised of various softwar e components whose individual copyrights are held by SHARP or by third parties. Software developed by SHARP and/or third part The copyrights for the software components and various relevant docume[...]

Appendix T roubleshooting Problem Possible Solution • No power . • Check if you pressed TV a on the remote contr ol unit. If the indicator on the TV lights up red, press TV a . • Is the AC cord disconnected? • Check if you pressed a on the TV . • The TV cannot be operated. • External influences such as lightning, static electricity , et[...]

Appendix Specifications Item 40” LCD COLOUR TV , Models: LC-40LE730E NET , LC-40LE732E NET 46” LCD COLOUR TV , Models: LC-46LE730E NET , LC-46LE732E NET LCD Panel 40” BLACK TFT LCD LED TV 46” BLACK TFT LCD LED TV Resolution 6.220.800 dots (1.920 x 1.080 pixels) Video Colour System P AL/SECAM/NTSC 3.58/NTSC 4.43/P AL 60 TV Func- tions TV Sta[...]

Sharp LCD-TV with an EU Eco-label This product has of fi cially been awarded the Eco-label of the European Union, “The Flower” (for details see EU Commission Decision 2009/300/EC - OJ L 82/3 dated 28.3.2009). Sharp is the fi rst company to achieve this Eco-label for TVs thus demonstrating its commitment to improving our environment. The Flowe[...]

A. Information on Disposal for Users (private households) 1. In the European Union Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin! Used electrical and electronic equipment must be treated separately and in accor dance with legislation that requires proper treatment, r ecovery and recycling of used elect[...]