Sharp LC-46PD7X Bedienungsanleitung

MODEL LC-46PD7X LC-52PD7X LCD COLOUR TELEVISION OPERA TION MANUAL Cover_46PD7X.indd 1 Cover_46PD7X.indd 1 2007/01/12 16:35:45 2007/01/12 16:35:45[...]

Password[...]

1 LC-46PD7X LC-52PD7X OPERATION MANUAL LCD COLOUR TELEVISION Dear SHARP customer Dear SHARP customer ........................................... 1 Contents .................................................................. 1 Trademarks ............................................................. 2 Important Safety Precautions .....................[...]

2 Contents • Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Trademarks Basic adjustment settings (Digital) ......................32 DTV input mode menu items..............................32 Selecting DTV mode ..........................................32 Programme Guide[...]

3 Important Safety Precautions • Cleaning — Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners. • Water and moisture — Do not use the product near water, such as bathtub, washbasin, kitchen sink, laundry tub, swimming pool and in a wet base[...]

Supplied accessories 4 Make sure the following accessories are provided with the product. Remote control unit “AAA” size battery ( g 2) AC cord AC cord clamp Cable clamp Operation manual Stand unit Page 14 Page 5 Page 7 Page 7 Page 7 Page 6 NOTE • Always use the AC cord supplied with the TV. • The illustrations and on-screen displays in thi[...]

30° 30° 5 Preparation CAUTION Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below. • Do not mix batteries of different types. Different types of batteries have different characteristics. • Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batt[...]

6 Preparation 1 2 2 1 3 1 Insert the stand into the openings on the bottom of the TV. 2 Insert and tighten the 4 long screws into the 4 holes on the rear of the TV. Hex key Long screw Soft cushion NOTE • To detach the stand, perform the steps in reverse order. 2 2 2 3 3 1 1 Hex key Short screw Attach the two supporting post for the stand unit ont[...]

Preparation 7 1 AC cord Connecting the AC cord, antenna, and external equipment to the TV AC outlet See pages 9 to 11 for connecting antennas and external equipment, such as VCR and DVD player. • Place the TV close to the AC outlet, and keep the power plug within reach. Setting the TV Notes on installing the TV • Avoid direct sunlight and place[...]

Removing the stand For wall mounting with the optional bracket, remove the stand. Before detaching/attaching the stand • Before detaching (or attaching) the stand, unplug the AC cord from the AC outlet. • Remove all terminal covers and connected cables. • Lay the TV down on cushioning (such as a blanket) over a table. • Make sure two or mor[...]

9 Preparation Simple operations for watching a TV programme Basic connection Connecting to an antenna To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections that are used for coaxial cable. Standard DIN45325 plug (IEC169-2) 75-ohm coaxial cable (round cable) Room antenna terminal (75-ohm[...]

L R AUDIO Y P B (C B ) P R (C R ) L R AUDIO Y P B (C B ) P R (C R ) 10 Preparation You can connect many types of external equipment to your TV, like a VCR, game console, camcorder, DVD player and PC. To view external source images, select the input source from TV/VIDEO on the remote control unit or TV/VIDEO on the TV. CAUTION • To protect all equ[...]

DVI-I AUDIO (L/R) 11 Preparation Connecting a PC You can use the INPUT 5 (DVI) terminal when connecting to a PC. When using DVI cable (commercially available). PC 46PD7X_en_a.indd 11 46PD7X_en_a.indd 11 2007/01/12 16:29:28 2007/01/12 16:29:28[...]

12 Part names TV (Front) Volume up ( e )/down ( f ) buttons Channel up ( r )/down ( s ) buttons OPC indicator* POWER (On/Off) button TV/VIDEO button *OPC: Optical Picture Control (See page 26.) SLEEP timer indicator OPC sensor Remote control sensor POWER indicator 46PD7X_en_a.indd 12 46PD7X_en_a.indd 12 2007/01/12 16:29:28 2007/01/12 16:29:28[...]

13 Part names TV (Rear) RS-232C terminal INPUT 3 (HDMI) terminals INPUT 4 (AUDIO) terminals MONITOR OUTPUT terminals INPUT 2 terminals INPUT 1 terminals Antenna input terminal (ANALOGUE) AC INPUT terminal SERVICE ONLY terminal* *Usually do not connect anything to this terminal as it is reserved only for service personnel. INPUT 4 (HDMI) terminals I[...]

14 Part names Remote control unit NOTE • When using the remote control unit, point it at the TV. 1 POWER (STANDBY/ON) To switch the power on and off. (See page 15.) 2 0 – 9 TV/DTV/External input mode: Set the channel. (See page 15.) TELETEXT mode: Set the page. (See pages 15, 50 and 51.) 3 A (Flashback) Press to return to the previous selected [...]

15 Turning on the power Press POWER on the TV. • POWER indicator (Green): The TV is on. (After a few seconds, an image appears with sound.) • After turning the power “ON” by pressing POWER on the TV, you can turn the power ON/OFF by pressing POWER on the remote control. Watching TV POWER button POWER button Turning off the power Press POWER[...]

Using Flashback ( A ) on the remote control unit Using MPX on the remote control unit 16 Press A to switch the currently tuned channel to the previously tuned channel. Press A again to switch back to the currently tuned channel. Press A to toggle between the currently selected input source and the previously selected one. Press A to return to the p[...]

1 2 20 17 Simple button operation for changing volume/sound NOTE • Within 30 minutes after pressing e , press one of the buttons below to cancel the mute. — VOL l / VOL k — e • Mute will be cancelled after 30 minutes. However, the TV will not suddenly output loud sound as the volume level will be set to 0 automatically. Increase the volume [...]

18 Watching TV ANALOG/DTV/RADIO buttons Use the following buttons on the remote control to operate the menu. ANALOG: Press to switch to analogue mode. After switching from DTV, radio or external input mode to analogue mode, the TV jumps to the most recently viewed analogue channel. DTV: Press to switch to DTV mode. After switching from analogue, ra[...]

On-Screen Display 1 Item displayed in yellow • This indicates the item currently selected. • Press ENTER to go to the adjustment screen for this item. 2 Item in brackets • This indicates the current setting for the item. 3 Item displayed in white • This indicates an item can be selected. 4 Item displayed in grey • This indicates that the [...]

Picture Picture 20 Basic adjustment settings Menu items (TV/DTV/INPUT1-2) List of menu items to help you with operations Menu items (HDMI/DVI) List of menu items to help you with operations OPC .............................................................................. Page 26 Backlight ...........................................................[...]

21 Basic adjustment settings (Analogue) Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Auto Installation”, and then press ENTER . Auto installation You can run auto installation again, even after setting up the preset channels. Programme setup You can run the auto search procedure again at any[...]

22 Basic adjustment settings (Analogue) Manual setting for each channel You can set some channel items manually. They are Search, Fine (TV frequency), Colour sys., Sound sys., Label (Network name), Skip and Lock (Child Lock). Press MENU and the MENU screen displays. Press c / d to select “Setup”. 1 2 3 Press a / b to select “Programme Setup?[...]

23 Basic adjustment settings (Analogue) Sound system (Broadcasting system) Press a / b / c / d to select the channel you want to edit, and then press ENTER . • The selected channel information displays. Press a / b to select “Sound sys.”, and then press ENTER . • Receivable sound systems (Broadcasting systems) are listed. 1 2 Fine Search Co[...]

24 Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. Press a / b to select “Programme Setup”, and then press ENTER . If you have already set the password, enter it here. If not, enter the factory preset password “1234”. • See page 39 for setting a password. 2 3 Press a / b to select “Sort”, and then press E[...]

25 Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. Press a / b to select “Programme Setup”, and then press ENTER . If you have already set the password, enter it here. If not, enter the factory preset password “1234”. • See page 39 for setting a password. 2 3 Press a / b to select “Erase Programme”, and t[...]

Selected item Off On On: Display Description The brightness is fi xed at the value set in “Backlight” (See page 27). Automatically adjusts Displays the OPC effect on the screen while adjusting the brightness of the screen. 26 Basic adjustment settings (Analogue/Digital) AV MODE selection The AV MODE function enables you to select appropriate s[...]

Press MENU and the MENU screen displays. 1 Press c / d to select “Picture”. 2 Press a / b to select a specifi c adjustment item. 3 Press c / d to adjust the item to your desired position. 4 NOTE • For resetting all adjustment items to factory preset values, press a / b to select “Reset”, press ENTER , press c / d to select “Yes”, and[...]

Black For easier viewing, change the viewing depth by selecting a level for automatically adjusting the dark portion of an image. Repeat steps 1 to 3 in Colour temperature . 1 Press a / b to select “Black”, and then press ENTER . 2 Press c / d to select “On”, and then press ENTER . 3 Colour T emp. Black Quick Shoot 3D - Y/C Monochrome Film [...]

29 Repeat steps 1 to 3 in Monochrome . 1 Film Mode Automatically detects a fi lm-based source (originally encoded at 24/25 frames/second, depending on the vertical frequency), analyses it then recreates each still fi lm frame for high-defi nition picture quality. Press a / b to select “Film Mode”, and then press ENTER . 2 Press c / d to sele[...]

Audio adjustment You can adjust the sound quality to your preference with the following settings. Surround When you set to “On”, you can enjoy surround sound, the same as if you were in a movie theatre. Using SURROUND on the remote control unit Press SURROUND to switch the Surround function on and off. Selected item On Off Description Makes it [...]

31 Basic adjustment settings (Analogue/Digital) Press MENU and the MENU screen displays. 1 Press c / d to select “Power Control”. • Power control menu displays. 2 Press a / b to select “No Signal Off”, and then press ENTER . 3 Press c / d to select “Enable”, and then press ENTER . • Five minutes before the power shuts down, remainin[...]

Setup Option Programme DTV Menu > Pr ogramme DTV input mode menu items 32 Basic adjustment settings (Digital) Programme Programme List ......................................................................................................... Page 34 Edit Channel List of DTV menu items to help you with operations Favourite & Lock .............[...]

03-0001 03-0002 03-0030 03-0040 BBC ONE ABC 12:11 Programme Guide BBC TWO CBBC Channel 12-0021 ABC Melbourne BBC NEWS 24 Now ABC2 ( 11:04 - 12:03 ) [Montreux Jazz Festival 2003] Next ABC2 ( 12:03 - 13:30 ) [The New Inventors] 0002 Favourite Programme List 0030 0040 BBC TWO CBBC Channel BBC NEWS 24 33 Basic adjustment settings (Digital) Programme Gu[...]

Edit Channel Programme List 0001 BBC ONE TV Programme List 0002 BBC TWO 0030 CBBC Channel 0040 BBC NEWS 24 Parental Rate Favourite & Lock 34 Basic adjustment settings (Digital) Programme List You can select the desired programme from the programme list. Press a / b to select “Programme List”, and then press ENTER . Press a / b to select “[...]

35 Basic adjustment settings (Digital) Installation The fi rst time the receiver is powered on, “Programme list is empty” will display on the screen. Under the main menu, select “Installation” and enter into the sub- menu. Press a / b to select “Setup”, and then press ENTER . 2 Press DTV MENU to display the DTV menu screen. 1 Press a /[...]

Manual Adjust Quick Search Reset Data Auto Search Adelaide Brisbane Melbourne Perth Sydney Quick Search 36 Press a / b to select “Setup”, and then press ENTER . 2 Press DTV MENU to display the DTV menu screen. 1 Press a / b to select “Installation”, and then press ENTER . If you have already set the password, enter it here. If not, enter th[...]

Multilingual Digital Output PCM Dolby Digital Digital Output Multilingual Digital Output Language (Dolby D) Language 1 (Mpeg) Audio Language Audio Setup Time Setup I-Plate Setup Video Setup NSW/ACT Time Zone 37 Press a / b to select “Setup”, and then press ENTER . 2 Press DTV MENU to display the DTV menu screen. 1 Digital Output This function a[...]

Display Time 5 sec 24 HR Time Format Information S/W Update System Information S/W V ersion : AUPI73T14 DT1r11t1f2G Release Time : MAR 30 2006 19:00:35 Audio Setup Time Setup I-Plate Setup Video Setup 38 Basic adjustment settings (Digital) Press a / b to select “Setup”, and then press ENTER . 2 Press DTV MENU to display the DTV menu screen. 1 I[...]

39 Useful adjustment settings Password setting for child lock (for TV/DTV input mode) Allows you to use a password to protect certain settings from being accidentally changed. Setting a password Register a 4-digit password number to use the Child Lock function. Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. 2 Press a [...]

INPUT 3 (HDMI1) INPUT 4 (HDMI2) INPUT 5 (DVI) Ye s No 40 Input Skip This setting allows you to skip the HDMI or DVI input on the “Input Select” menu. Useful adjustment settings Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. 2 Press a / b to select “Input Skip”, and then press ENTER . 3 Press a / b to select th[...]

41 Press c / d to select “Yes”, and then press ENTER . • Auto Sync. starts and “Adjusting the image” displays. 4 NOTE • When Auto Sync. is successful, “Auto Sync completed successfully” displays. If not, Auto Sync. failed. • Auto Sync. may fail even if “Auto Sync completed successfully” displays. • Auto Sync. may fail if the[...]

42 Input Label You can assign each input source a label you like. Useful adjustment settings INPUT SOURCE TV DTV INPUT1 INPUT2 DVD INPUT4 INPUT5 Repeat until the name is fully spelt out. • The name can be 6 characters or less. • When you want to set an input source name of less than 6 characters, select “END”, then press ENTER to exit from [...]

43 Useful adjustment settings Wide Screen Signalling (WSS) WSS allows a television to switch automatically among the different screen formats. Press MENU and the MENU screen displays. 1 Press c / d to select “Setup”. 2 Press a / b to select “WSS”, and then press ENTER . 3 Press c / d to select “On” or “Off”, and then press ENTER . 4[...]

44 Useful adjustment settings Standby Mode Standby Mode may be set to either start the TV quickly from standby or conserve energy while on standby. Press a / b to select “Standby Mode”, and then press ENTER . 3 Press a / b to select “Mode1” or “Mode2”, and then press ENTER . 4 Press MENU and the MENU screen displays. 1 Press c / d to se[...]

45 Selected item Normal Zoom 14:9 Panorama Full Cinema 16:9 Cinema 14:9 Dot by Dot Description For 4:3 “standard” pictures. A side bar appears on each side. For 14:9 letterbox pictures. A thin side bar appears on each side, and you may also see bars on the top and bottom with some programmes. In this mode the picture is progressively stretched [...]

46 Useful adjustment settings Input Signal Cinema Normal 1024 g 768 For viewing wide screen programs. The top and bottom of the image is slightly cropped. Keeps the original aspect ratio in a full screen display. WIDE mode (for PC input mode) Press WIDE . • The WIDE MODE menu displays. 1 Press WIDE or a / b to select a desired item on the menu. 2[...]

47 Useful adjustment settings Audio Only When listening to music from a music programme, you can set the display off and enjoy audio only. Press MENU and the MENU screen displays. 1 Press c / d to select “Option”. 2 Press a / b to select “Audio Only”, and then press ENTER . 3 Press c / d to select “On”, and then press ENTER . 4 DNR (Dig[...]

Press MENU and the MENU screen displays. 1 Press c / d to select “Option”. 2 Press a / b to select “Colour System”, and then press ENTER . 3 Press a / b to select a compatible video signal system of your equipment, and then press ENTER . 4 Auto PA L SECAM NTSC 3.58 NTSC 4.43 P AL-60 48 Useful adjustment settings Colour system setting You ca[...]

To watch a DVD image, select “INPUT1” using TV/VIDEO on the remote control unit or TV/ VIDEO on the TV. 1 Displaying a DVD image (Example) INPUT SOURCE TV DTV INPUT1 INPUT2 INPUT3 INPUT4 INPUT5 Select the desired signal type on “Input Select” in the “Option” menu. 2 MENU [ Option ... Input Select ] Auto COMPONENT VIDEO For INPUT1 signal[...]

1 2 3 50 Turning on and off Teletext Useful features Teletext function What is Teletext? Teletext broadcasts pages of information and entertainment to specially equipped television sets. Your TV receives Teletext signals broadcast by a TV network, and decodes them into graphical format for viewing. News, weather reports, sports information, stock e[...]

51 Displaying Subtitle You can display several subtitles as they are transmitted. Useful features Displaying Subpages You can display several subpages as they are transmitted. 1 2 Press [ to display the subtitle. • Subtitle is updated by information sent by the broadcasting station. • To stop updating subtitle automatically, press 3 . Press [ t[...]

1 2 3 4 MENU [ Setup ... T ext Language ] W est Europe East Europe Greek/T urkish Cyrillic 52 Useful features Press MENU and the MENU screen displays. Press c / d to select “Setup”. Press a / b to select “Text Language”, and then press ENTER . Teletext language setting If Teletext information does not display correctly, perform the setting [...]

53 Troubleshooting Possible Solution Appendix Problem • No power. • Unit cannot be operated. • Remote control unit does not operate. • Picture is cut off. • Strange colour, light colour, or dark, or colour misalignment. • Power is suddenly turned off. • No picture. • No sound. • Check if you pressed POWER on the remote control uni[...]

54 RS-232C port specifi cations PC Control of the TV • When a programme is set, the TV can be controlled from the PC using the RS-232C terminal. The input signal (PC/video) can be selected, the volume can be adjusted and various other adjustments and settings can be made, enabling automatic programmed playing. • Attach an RS-232C cable cross-t[...]

55 Commands • Commands not indicated here are not guaranteed to operate. Appendix Response code format OK Normal response Return code (0DH) ER R Problem response (communication error or incorrect command) Return code (0DH) P I I I I D C C D D D I I I I I I I I I A A A A A A A A POWER OFF (ST ANDBY) INPUT SWITCHING (TOGGLE) TV (CHANNEL FIXED) DTV [...]

* You cannot change TV angles when you mount the TV on the wall using the AN-37AG2 wall mount bracket. 56 Specifi cations Appendix LCD panel Video Colour System TV Function TV-Standard PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60 PAL: B/G, D/K, I SECAM: B/G, D/K, K/K 1 NTSC: M Item LC-46PD7X 46 o (117 cm) Advanced Super View & BLACK TFT LCD Model Numb[...]

660 (660) 100 (100) 200 (200) 200 (200) 309 (309) 62 (62) 449 ( 489 ) 1127 ( 1263 ) 98 ( 96 ) 124 ( 125 ) 728 ( 807 ) 790 ( 869 ) 1021.4 ( 1155 ) 575.4 ( 651 ) 57 Unit: mm Dimensional drawings LC-46PD7X, LC-52PD7X NOTE • Figures within parentheses are for LC-52PD7X. 46PD7X_en_j.indd 57 46PD7X_en_j.indd 57 2007/01/12 16:34:48 2007/01/12 16:34:48[...]

58 CLEARING THE PASSWORD If you forget the password, clear the password using the following procedure. 1 2 Press a / b to select “Auto Installation”, “Programme Setup”, “Child Lock”, and the password input screen displays. Press MENU to display the MENU screen, and then press c / d to select “Setup”. 3 Press and hold both CH r and V[...]

Memo 46P7H_cs_j.indd 49 46P7H_cs_j.indd 49 2007/01/22 13:38:25 2007/01/22 13:38:25[...]

Memo 46P7H_cs_j.indd 49 46P7H_cs_j.indd 49 2007/01/22 13:38:25 2007/01/22 13:38:25[...]

Cover2_46PD7X.indd 2 Cover2_46PD7X.indd 2 2007/01/12 16:35:21 2007/01/12 16:35:21[...]

Printed in Malaysia TINS-D066WJZZ 07P02-MA-NG Printed on post-consumer recycled paper. Cover_46PD7X.indd 2 Cover_46PD7X.indd 2 2007/02/02 14:09:54 2007/02/02 14:09:54[...]