Sony DVS-RS1616 Bedienungsanleitung

ROUTING SWITCHER SYSTEM INSTALLATION MANUAL FOR SYSTEM SETUP 1st Edition (Revised 5) ROUTING SWITCHER DVS-128 RS-422A REMOTE ROUTING SWITCHER DVS-RS1616 DIGITAL AUDIO ROUTING SWITCHER DVS-A3232 TIME CODE ROUTING SWITCHER DVS-TC3232 DIGITAL VIDEO ROUTING SWITCHER DVS-V1616 ANALOG AUDIO ROUTING SWITCHER BVS-A3232 HD ROUTING SWITCHER HDS-V3232 ANALOG [...]

IBM and AT are registered trademarks of International Business Machines, Inc. Windows is a registered trademark of Microsoft Corporation. Windows NT is a trademark of Microsoft Corporation. Intel 80486SX is a trademark of Intel Corporation. ROUTING SWITCHER SYSTEM (E)[...]

1 ROUTING SWITCHER SYSTEM (E) Table of Contents Manual Structure Purpose of this manual .............................................................................................. 5 Contents ..................................................................................................................... 5 Related manuals ....................[...]

2 ROUTING SWITCHER SYSTEM (E) 3. Control Terminal 3-1. Selecting the Control Terminal ................................................................... 3-1 3-2. Control Terminal Display ........................................................................... 3-2 3-3. System Status Screen ........................................................[...]

3 ROUTING SWITCHER SYSTEM (E) T : SET CLOCK .................................................................................... 5-20 U : SELECT REMOTE .......................................................................... 5-21 V : SELECT WARNING DISPLAY ..................................................... 5-22 W : SYSTEM STATUS LOG ..........[...]

4 ROUTING SWITCHER SYSTEM (E) Z : SET PANEL STATUS (BKS-R1607/R1608/R3204/R3205/R3209/R3210) <MONITOR MENU> ...................................................................... 5-52 5-5. Backup of Setting Data ............................................................................. 5-54 5-6. When Data is Lost ..........................[...]

5 ROUTING SWITCHER SYSTEM (E) Purpose of this manual This is the Installation Manual (software) for the Sony routing switcher system (it is described as “router system” in this manual). It contains information on the initial settings of the software when installing the units making up the digital router system. This manual is intended for syste[...]

6 ROUTING SWITCHER SYSTEM (E) Related manuals In addition to this installation manual for system setup, the following manuals are also available for the main units making up the system. (1) DVS-V3232B/V6464B/V3232M/V6464M/128 . . . . . Operation Manual (supplied with the DVS-V3232B/V6464B/V3232M/V6464M/128) This manual explains the notes on operati[...]

7 ROUTING SWITCHER SYSTEM (E) (2) DVS-V1616/A3232/RS1616/TC3232, BVS-V3232/A3232, BKS-R1607/ R1608/R3209/R3210 . . . . . Operation Manual (supplied with each unit) This manual explains the notes on operating, specifications, locations and functions of each unit. . . . . . Maintenance Manual (supplied with each unit) This manual contains information[...]

8 ROUTING SWITCHER SYSTEM (E) (6) HDS-X3400/X3600/X3700 . . . . . Maintenance Manual Part 1 (supplied with HDS-X3000 series) This manual describes how to install and maintain the HDS-X3000 series, and contains information on primary services (how to replace the main blocks and boards, and other information). . . . . . Maintenance Manual Part 2 (ava[...]

1-1 ROUTING SWITCHER SYSTEM (E) Section 1 System Overview 1-1. Digital Routing Switcher System The system consists of the following units. . Routing Switcher (DVS-V1616/V3232B/V6464B/A3232/TC3232/RS1616, BVS-V3232/A3232, HDS-V3232) It switches signals according to the command from the remote control unit. Varied switchers are available for differen[...]

1-2 ROUTING SWITCHER SYSTEM (E) 1-1. Digital Routing Switcher System Software Versions This manual is intended for systems consisting mainly of the DVS-V3232B/V6464B digital video routing switchers and units loading the following software versions and above. When units other than these are used, some terminal displays will be different and some fun[...]

1-3 ROUTING SWITCHER SYSTEM (E) 1-2. System Control * 1: The specifications of BKPF-R70. When BKPF-R70 is used, termination resistors are necessary at both ends of the cable. The cable cannot be checked for open circuit. * 2: Known before as switcher protocol. 1-2. System Control 1-2-1. Specifications and functions of control port The DVS-V3232B/V6[...]

1-4 ROUTING SWITCHER SYSTEM (E) 1-2. System Control * 1: The transfer speed of BKPF-R70 is 38400 bps. REMOTE 3 D-sub 25-pin (MODEM side pin arrangement) Protocol RS-232C, 9600 bps * 1 , 8bit, No Parity, No check Function With this port the communication between the primary station and the control terminal and the setting of the units are performed.[...]

1-5 ROUTING SWITCHER SYSTEM (E) 1-2. System Control * 1 : When one of the BKPF-300 series is set in a primary station, it can control up to 30 units (including the primary station). * 2 : It means a switcher which is set the M/S switch on CPU board to “M” position. In the case of BKPF-R70, the switch is set to “P” position. * 3 : It means a[...]

1-6 ROUTING SWITCHER SYSTEM (E) Either one of the REMOTE 1 connectors of the secondary station routing switchers can be used. * 1: The function switch will be not working in the terminal mode of the Windows 95/NT. * 2: (M) and (S) mean the setting of M/S switch on the CPU board. * 3: Connect the 75 Z terminators to the T type bridge of the last dev[...]

1-7 ROUTING SWITCHER SYSTEM (E) 1-2. System Control * 1 : There are two kinds of cart protocol due to the control area. Unless otherwise noted, “cart protocol” in this manual mean the cart plus protocol. 1-2-3. 9-pin remote control The Sony digital routing switcher can be controlled from external control units connected to the RE- MOTE 2 (D-sub[...]

1-8 ROUTING SWITCHER SYSTEM (E) 1-2. System Control DVS- V6464B (S) DVS- V6464B (S) DVS- V6464B (S) DVS- V6464B (S) DVS-A3232 (S) DVS-A3232 (S) DVS-A3232 (S) DVS-A3232 (S) DVS-V3232B (M) S-BUS Remote Control Unit Status Display Sub Controller (Interface Unit) REMOTE 2 RS-422A DVS- V6464B (S) DVS-A3232 (S) DVS-A3232 (S) DVS-A3232 (S) DVS-A3232 (S) D[...]

1-9 ROUTING SWITCHER SYSTEM (E) 1-2. System Control Control terminal (IBM PC/AT compatibles) To D-sub 9-pin connector To REMOTE 3 connector DVS-V6464B RS-232C cross cable (9-pin ↔ 25-pin) 1-2-4. Connection of control terminal Connect the control terminal to the REMOTE3 (D-sub 25-pin) connector of the primary station as shown below. The control te[...]

1-10 ROUTING SWITCHER SYSTEM (E) The following shows one way of connecting the monitor S-BUS system. 1-2. System Control Monitor Monitor : M/S switch setting on the monitor Board. : T Bridge (A) : T Bridge (B) : 75 Z Terminator DVS-V6464B B type A type D type C type (Inut signal) (Max. 200 m) (Max. 200 m) DVS-V6464B DVS-V6464B DVS-V6464B BKS-R3209 [...]

2-1 ROUTING SWITCHER SYSTEM (E) Section 2 Functions 2-1. Main Functions of Router System 1) The routing switcher is equipped with a system controller. It therefore does not require an additional controller for controlling the routing switchers. 2) By the cascade connection, up to 512 x 512 crosspoints can be selected. 3) Up to 8 levels can be assig[...]

2-2 ROUTING SWITCHER SYSTEM (E) 2-2. Built-in Controller 2-3. Matrix Sizes 2-4. Number of Levels 2-5. Number of Units 2-2. Built-in Controller The Sony digital routing switcher incorporates a system controller and therefore does not require a separate external controller. When several routing switchers are connected to the S-BUS, the CPU of the swi[...]

2-3 ROUTING SWITCHER SYSTEM (E) 2-6. Protect Function 2-7. Secret Function 2-8. Crosspoint Disable Setting Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) 2-9. Password Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) 2-6. Protect Function Function which protects the crosspoint set so that it cannot be released using other remote control u[...]

2-4 ROUTING SWITCHER SYSTEM (E) 2-10. Setting the Input/Output Name (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) 2-10. Setting the Input/Output Name (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) The following names can be used for the input/output connectors of the routing switcher. 1. “Type+Number” name 2. ”Description“ name There are altoget[...]

2-5 ROUTING SWITCHER SYSTEM (E) 2-10. Setting the Input/Output Name (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) The name “Type + Num” consists of four alphabets and three numbers. It is assigned to the virtual number. Sixteen kinds of letters can be set for the “Type” part. Number 1 to 999 can be used for the “Num” part. Examples: CAM 2[...]

2-6 ROUTING SWITCHER SYSTEM (E) 2-11. Virtual Mapping Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) 2-11. Virtual Mapping Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) Several routing switchers can be mapped on a virtual matrix with 512 inputs and 512 outputs in router system. The matrix of one switcher can be also divided into severa[...]

2-7 ROUTING SWITCHER SYSTEM (E) 2-12. Free Assignment Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) 32 LEVEL-1 LEVEL-2 LEVEL-3 (VIDEO) (AUDIO-1) (AUDIO-2) 5 32 32 4 2 18 IN002 OUT004 2-12. Free Assignment Function (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) While the same input/output number can be assigned, through levels 1 to 8, for each i[...]

2-8 ROUTING SWITCHER SYSTEM (E) 2-13. Monitor Function (BKDS-V3292B only) (Input) 128 65 64 Input Input 1 1 Input Monitor (Separate connection) Output 64 DVS-V6464B (A Type) DVS-V6464B (B Type) DVS-V6464B (D Type) DVS-V6464B (C Type ) 65 128 (Output) Output Output Monitor (Separate connection) or Input + Output Monitor (Combined connection) 2-13. M[...]

2-9 ROUTING SWITCHER SYSTEM (E) 2-13. Monitor Function (BKDS-V3292B only) DVS-V6464B DVS-V6464B (P-1) DVS-V6464B DVS-V6464B DVS-V6464B (P-2) DVS-V6464B DVS-V6464B DVS-V6464B DVS-V6464B (P-3) BKS-R3204 BKS-R3204 BKS-R3204 BKS-R3206 BKS-R3204 BKS-R3204 75 Z Terminate : Standard S-BUS Line : Monitor S-BUS Line Cascade Connection 75 Z Terminate 75 Z[...]

2-10 ROUTING SWITCHER SYSTEM (E) * 1 : Source means the input signal. Destination means the output signal. 2-14. Tie Line Management (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) 2-14. Tie Line Management (DVS-V3232B/V6464B, BKPF-R70 and HDS-V3232) If the primary station is a DVS-V3232B/V6464B, BKPF-R70 or HDS-V3232, by previously setting four signal[...]

2-11 ROUTING SWITCHER SYSTEM (E) SOURCE GROUPS NET GROUPS DESTINATION GROUPS S001:IN003 N001:OUT003-IN200 N002:OUT013-IN054 D001:OUT023  IN004 OUT004-IN201 OUT014-IN055 OUT024  IN005 OUT005-IN202 OUT015-IN056 OUT025 IN006 OUT006-IN203 OUT016-IN057 OUT026   S002:IN010 N003:OUT023-IN007 N004:OUT033-IN230 D002:OUT027  IN015 OUT024[...]

2-12 ROUTING SWITCHER SYSTEM (E) 2-16. Self-Diagnosis Function 2-16. Self-Diagnosis Function The routing switcher performed self-diagnosis on the following items and displays the results on the control terminal connected to the primary station. O Presence of board and its sort O Version of ROM on the control board O Presence of backup power supply [...]

2-13 ROUTING SWITCHER SYSTEM (E) 2-17. Route Function 12 3 4 6 7 8 12 3 4 IN OUT1 OUT2 567 8 Expanded input (Source of swithcer B) DVS-7000 (Level 1) DVS-V6464B (Level 1) Switcher A Switcher B Expanded input selection buttons Selection buttons OUT2 controlling panel Phantoms are set to these button. IN1 : OUT1 < IN1 IN2 : OUT1 < IN2 IN3 : OUT[...]

2-14 ROUTING SWITCHER SYSTEM (E) 2-18. Enhanced Restriction of Selected Block (BKS-R1607/R3210 only) If you define a certain number of outputs, you can vary a number of inputs which would not be capable with the older panel. This is applicable with BKS-R1607 and BKS-R3210. Maximum 8 blocks can be defined. Block Selected block of input Selected bloc[...]

3-1 ROUTING SWITCHER SYSTEM (E) Section 3 Control Terminal * 3-1. Selecting the Control Terminal Load Windows 3.1 to an IBM PC/AT compatible machine (CPU: 80486 or a faster and more powerful micro-processor, clock: 25 MHz or faster enough) and use it as a control terminal in the terminal mode of Windows. When using personal computers, codes F1 to F[...]

3-2 ROUTING SWITCHER SYSTEM (E) System Status Screen Menu Screen Setting Screen Menu Screen Setting Screen Menu Screen Setting Screen Menu Screen Setting Screen Monitor S-BUS Menu and Setting Screen Setting of the primary station Setting of the Secondary station Setting of the secondary station on monitor S-BUS Setting of the primary station on mon[...]

3-3 ROUTING SWITCHER SYSTEM (E) SONY Digital Routing System DVS-V6464B V2.10   ITEM ROM CHECK SUM 8A65 RAM READ AND WRITE OK REFERENCE SIGNAL OK S-BUS LINK TERMINATE OK REAL TIME CLOCK  STARTED 1993.02.03-22.15 STARTED BY DVS-V6464B Ver2.10 IN STATION 1 1993.02.03-22.15 S-BUS LINK DISCONNECTED TO CHANNEL B 1993.0[...]

3-4 ROUTING SWITCHER SYSTEM (E) SONY ROUTING SYSTEM SETUP MENU DVS-V6464B V2.10 STATION NUMBER 1  MODIFICATION COMMAND  A: DISPLAY CONTROL AREA B: SET SOURCE/DEST TYPE C: SET DESTINATION NAME D: SET SOURCE NAME E: SET LEVEL TABLE F: SET ACTIVE UNIT NUMBER G: UPDATE BACKUP CONTROLLER H: SET GLOBAL PHANTOM J: NAME STYLE(Type +[...]

3-5 ROUTING SWITCHER SYSTEM (E) SONY ROUTING SYSTEM SETUP MENU DVS-V1616 V3.00 STATION NUMBER 9   MODIFICATION COMMAND  A: SET UNIT LOCATION K: DEFAULT TABLE    MAINTENANCE COMMAND  Y: DISPLAY TABLE  Ctrl-D:RETURN   SONY ROUTING SYSTEM SETUP MENU DVS-V6464B V2.10 STATION NUMBER 2   MODI[...]

3-6 ROUTING SWITCHER SYSTEM (E) 3-4. Menu Screen 3 DVS-RS1616/TC3232/A3232, BVS-V3232/A3232 Menu Screen of the Secondary Station (Ex. DVS-RS1616) n DVS-TC3232/A3232 and BVS-V3232/A3232 does not have menu item [Z]. 4 HDS-V3232 Menu Screen of the Secondary Station (Ex. HDS-V3232) 5 BKPF-R300/301/350/351 Menu Screen of the Secondary Station (Ex. BKPF-[...]

3-7 ROUTING SWITCHER SYSTEM (E) (2) Remote control unit 1 BKS-R3202 Menu Screen of the Remote Control Unit (Ex. BKS-R3202) 2 BKS-R3204/R3205/R3206 Menu Screen of the Remote Control Unit (Ex. BKS-R3206) 3-4. Menu Screen SONY ROUTING SYSTEM SETUP MENU BKS-R3202 V3.10 STATION NUMBER 16   MODEFICATION COMMAND   H: SET PHANTOM TA[...]

3-8 ROUTING SWITCHER SYSTEM (E) 3-4. Menu Screen 3 BKS-R1607, BKS-R1608, BKS-R3209, BKS-R3210 Menu Screen of the Remote Control Unit (Ex. BKS-R1607) n BKS-R1608/R3209 does not have the menu item [O]. 4 BKS-R3216, BKS-R1617, BKS-R1618, BKS-R3219, BKS-R3220, BKS-R1621 Menu Screen of the Remote Control Unit (Ex. BKS-R3216) SONY ROUTING SYSTEM SETUP ME[...]

3-9 ROUTING SWITCHER SYSTEM (E) 3-4. Menu Screen 3-4-3. Menu screen of the primary station on monitor S-BUS To call the menu screen of the primary station on the monitor S-BUS, select menu item [R: CALL SECONDARY STATION] in the primary station menu on the standard S-BUS. (The switcher set as the primary station on the monitor S-BUS.) Next, select [...]

3-10 ROUTING SWITCHER SYSTEM (E) (2) Remote control unit 1 BKS-R3202 Menu Screen of the Secondary Station on Monitor S-BUS (Ex. BKS-R3202) 2 BKS-R3204, BKS-R3205 Menu Screen of the Secondary Station on Monitor S-BUS (Ex. BKS-R3204)  MONITOR SYSTEM SETUP MENU BKS-R3204 V3.11 STATION NUMBER 18   MODIFICATION COMMAND   N: SET P[...]

3-11 ROUTING SWITCHER SYSTEM (E) 3-5. Setting Screen 3-5. Setting Screen Set the items in the menu in the setting screen. To call the setting screen, select the menu item with the cursor key or input it using the alphabet key, and press [Enter] . (The same procedure for calling the setting screen is applied to both the primary station menu and seco[...]

[...]

4-1 ROUTING SWITCHER SYSTEM (E) Section 4 Setup Procedure 4-1. Outline This setup procedure is written for the setup operator to understand the setup procedure, and more importantly, the philosophy behind the setup. Time spent now, before actually sitting down at the Setup Terminal will greatly enhance the flexibility of your router system (routing[...]

4-2 ROUTING SWITCHER SYSTEM (E) 4-2. Preliminary Information Before Installation 4-2. Preliminary Information Before Installation The control area of each switcher when used as the primary station is as follows. Model Input control Output control Level Remarks area area management DVS-V6464B 1 to 512 1 to 512 1 to 8 Expansion possible DVS-A3232 DVS[...]

4-3 ROUTING SWITCHER SYSTEM (E) * 1 : Set the P/S switch of the BKPF-R70 board to “P” position. * 2 : Use the cross-cable with 9-pin (female) and 9-pin (female) connectors for BKPF-R70. * 3 : Data transfer speed of BKPF-R70 is 38400 bps. 4-3. Preparation Before Setup 4-3. Preparation Before Setup 1. Set a primary station DVS-V6464B or DVS-V3232[...]

4-4 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures 4-4. Basic Setup Procedures 1. Identify all in/out signals, and segregate them into 16 types of sources and destinations (1) Make IN/OUT list of each routing switcher Make input/output list of each routing switcher referring to installation, or wiring diagram or other documentation showing[...]

4-5 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures VTR 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 VTR 2 VTR 3 VTR 4 VTR 5 VTR 6 VTR 7 VTR 8 Studio A News 1 Satellite 1 Satellite 2 Network 1 Network 2 Remote 1[...]

4-6 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures SOURCE/DEST/PHANTOM TYPE DVS-V6464B V2.10 STATION NUMBER 1  0=VTR 1=VCR 2=AUX 3=FLM 4=TEST 5=STU 6=CAM 7=REM 8=CG 9=NETA A=ENG B=ED C=FS D=SS E=BARS F=PHAN   Ctrl-E:RETURN TO MENU  (2) Assign Name Types (Menu Item [B]) Now select, and enter your 16 source and destinati[...]

4-7 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures Levels Can occupy dif ferent size 2 dimensional space Level 1 Level 2 Level 3 Y Z X Figure 2 shows that no two levels need to occupy the same size space in the X, and Y directions. As our example in figure 1 demonstrates, level 1 could be 32 by 32 in 2 dimensional X, Y space, while levels [...]

4-8 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures Level Mapping Level 1 Level 2 Level 3 Input (Sources) Output (Destinations) Going back to the VTR 1 example, each of the 3 routing switcher outputs (SDI, AES/EBU, and analog audio) could be assigned to a different level, under the VTR001 label. Whenever destination VTR001 was selected all [...]

4-9 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures Level 1 SDI Routing Switcher VTR 1 VTR 2 VTR 3 VTR 4 VTR 5 VTR 6 VTR 7 VTR 8 Studio A News 1 Satellite 1 Satellite 2 Network 1 Network 2 Remote 1 Remote 2 Camera 1 Camera 2 Camera 3 Camera 4 Still Store 1 Still Store 2 Char Gen 1 Char Gen 2 Frame Sync 1 Frame Sync 2 Studio B Patch Patch Pa[...]

4-10 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures Physical Inputs Source Connector Name VTR 1 VTR 2 VTR 3 VTR 4 VTR 5 VTR 6 VTR 7 VTR 8 Studio A News 1 Satelite 1 Satelite 2 Network 1 Network 2 Remote 1 Remote 2 Camera 1 Camera 2 Camera 3 Camera 4 Still Store 1 Still Store 2 Char Gen 1 Char Gen 2 Frame Sync 1 Frame Sync 2 Studio B Patch [...]

4-11 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures V irtural and Level Mapping Level 1 Level 2 Level 3 Example : Destinations . Satellite 1 connected to SDI routing switcher OUT 9 (SDI routing switcher given label destinations 001-032) . DAT 1 connected to AES/EBU routing switcher OUT 9 (AES/EBU routing switcher given label destinations 0[...]

4-12 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures With this approach sources, and destinations like the VTR’s would be level mapped together so that all 3 routing switchers switch at the same time under the VTR001, VTR002, etc. label. But in the case of output 11, of each of the 3 routing switchers, the 1, and 3 levels (SDI, and analog[...]

4-13 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures VTR 1 VTR 2 VTR 3 VTR 4 VTR 5 VTR 6 VTR 7 VTR 8 Studio A News 1 Satellite 1 Satellite 2 Network 1 Network 2 Remote 1 Remote 2 Camera 1 Camera 2 Camera 3 Camera 4 Still Store 1 Still Store 2 Char Gen 1 Char Gen 2 Frame Sync 1 Frame Sync 2 Studio B Patch Patch Patch Patch A/D #1 VTR 001 VTR[...]

4-14 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures Now select suitable names for sources/destinations using Type name, and number and enter them in the IN/OUT list of each routing switcher (menu item [C]). Remember that you have to attention to the ins, and outs of routing switchers on all levels when you build this list. Example : VIDEO [...]

4-15 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures  001 002 003 004 005 006 007 008 009 010 011 012 013 : : 035 036 037 038 039 040   VTR001 VTR002 VTR003 VTR004 VTR005 VTR006 VTR007 VTR008 SAT001 SAT002 REM001 NET001 NEWS001 :?[...]

4-16 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures No. 001 002 003 004 005 006 007 008 009 010 011 : : 017 018 : : 033 034 035 036 037 038 039 040 NAME VTR001 VTR002 VTR003 VTR004 VTR005 VTR006 VTR007 VTR008 STU111 NEWS001 SAT001[...]

4-17 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures No. 001 002 003 004 005 006 007 008 NAME VTR001 VTR002 VTR003 VTR004 VTR005 VTR006 VTR007 VTR008 VID 005-1 006-1 007-1 008-1 001-1 002-1 003-1 004-1 A34 031-2 029-2 027-2 025-2 007-2 005-2 003-2?[...]

4-18 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures SONY ROUTING SYSTEM SETUP MENU SET PHANTOM TABLE(PHANTOM:DESTINATION<SOURCE-LEVEL)(G.PAHNTOM NAME:NUMBER) SAT999:0001 CAM999:CAM001<STU111 -1 CAM999:CAM002<STU111 -1 CAM999:CAM003<STU111 -1 CAM999:CAM004<STU111 -1 ......:......<...... -. ......:......<....[...]

4-19 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures ENABLE ACTIVE UNIT FOR STATION NUMBER  1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 001-020 M E E E E E E E 021-040 DVS-V3232B V2.10 STATION NUMBER 1 SET UNIT DETECTABLE 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 001-020 M 03 ? 15 04 ? ? ? 021-040 [...]

4-20 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures SET INHIBIT TABLE DEST. SOURCE 001 01--08 09--16 17--24 25--32 33--40 41--48 49--56  VTR001 -X-XXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX VTR002 XXX-XXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXXXX VTR003 XXXX-XXX XXXXXXXX XXXXXXXX XXXXXXXX XXXXXX[...]

4-21 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures Source Group S001:IN003 :IN004 :IN005 :IN006  S002:IN010 :IN015 :IN023 :IN027  PATHS 1:S001-N001-D001 2:S002-N002-D001 Net Group N001:OUT003-IN041 :OUT004-IN042 :OUT005-IN043 :OUT006-IN044  N002:OUT023-IN051 :OUT024-IN052 :OUT[...]

4-22 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures 001=VTR001 003=VTR003 : 017=CAM001 019=CAM003 ProgVTR BkupVTR : Pete Tom 002=VTR002 004=VTR004 : 018=CAM002 019=CAM004 SpotVTR Net-Dly : Mary John SOURCE NUMBER TRANSCODE   DVS-V3232B V2.10 STATION NUMBER 1 9. Description Name (Menu[...]

4-23 ROUTING SWITCHER SYSTEM (E) 4-4. Basic Setup Procedures 10. Control Panel Setup (Menu Item [R]) Each individual control panel is contacted, and programmed by selecting [R] in the setup menu, and then by entering the S-BUS address of the desired panel. If the control panels are enabled in the menu item [Z : SET UNIT DETECTABLE], this might help[...]

4-24 ROUTING SWITCHER SYSTEM (E) 4-5. Flowchart of Setup Initial Setting DVS-V3232/FV6464B : Set S3 to "D" (Default) position on the CPU-149 board, then return S3 to "0" position. HDS-V3232 : Set S2 to "D" (Default) position on the CPU-251 board, then return S2 to "0" position. K: RESET TO DEFAULT TABLE U: SE[...]

4-25 ROUTING SWITCHER SYSTEM (E) 4-6. Setting Up BKPF-300/301/350/351 4-6. Setting Up BKPF-300/301/350/351 1. Set the switch S1-3 on BKPF-300/301/350/351 to “OFF (TERMINAL)” position. 2. Select the menu item [R: CALL SECONDARY STATION] from the menu screen of primary station, and call BKPF-300/301/350/351. The following screen appears. (Example[...]

[...]

5-1 ROUTING SWITCHER SYSTEM (E) Section 5 System Settings DISPLAY CONTROL AREA DVS-V6464B V2.10 STATION NUMBER 1  SOURCE No 0001-0512 DESTINATION No 0001-0512    Ctrl-E:RETURN TO MENU 5-1. Setting Items of the Primary Station A : DISPLAY CONTROL AREA A : DISPLAY UNIT LOCATION Purpose The menu items [A : DISPLAY CONTROL AREA] and [[...]

5-2 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station B : SET SOURCE/DEST TYPE Purpose This menu is used to set the type name of the source destination and global phantom table. The menu makes the management of source/destination easier. Setting Procedure 1. Select menu item [B]. 2. Use the cursor or alphabet/numerical keys and [...]

5-3 ROUTING SWITCHER SYSTEM (E)  DESTINATION NUMBER TRANSCODE DVS-V6464B V2.10 STATION NUMBER 1  001=VTR001 P 002=VTR002 003=VTR003 P 004=VTR004  005=VTR005 006=VTR006 007=VTR007 008=VTR008  009=VCR101 010=VCR102 011=VCR103 012=VCR104  013=NETA001 014=NETA002 015=NETA003 016=NETA004  017=....... 018=....... 019=....... 020=.[...]

5-4 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  SOURCE NUMBER TRANSCODE DVS-V6464B V2.10 STATION NUMBER 1  001=VTR001 002=VTR002 003=VTR003 004=VTR004  005=VTR005 006=VTR006 007=VCR101 008=VCR102 S  009=AUX001 S 010=AUX002 011=CAM001 S 012=CAM002  013=CG001 014=NETA001 015=SS001 016=BARS001  017=..[...]

5-5 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station Operating Function Keys [F1] : SEARCH (To move the cursor to the desired source name) 1. When [F1] is pressed, “Please Input SOURCE NAME =” will be displayed. 2. Input the source name to be retrieved. 3. When [Enter] is pressed, the cursor will move to the desired source [...]

5-6 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  LEVEL TABLE D VS-V6464B V2.10 STATION NUMBER 1  1=VID 2=A1 3=A2 4=4 5=5 6=6 7=7 8=8  No. out VID A1 A2 4 5 6 7 8 001 OUT001 VID A1 A2 4 .... .... .... .... 002 OUT002 VID A1 A2 4 .... .... .... .... 003 OUT003 VID A1 A2 4 5 6 7 8 004 OUT004 VID A1 [...]

5-7 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  ENABLE ACTIVE UNIT FOR STATION NUMBER DVS-V6464B V2.10 STATION NUMBER 1  1 2 3 4 5 6 7 8 9 10 1112131415 1617181920 + 001-020 M E E E E E E E E E E E E E E E E E E E 021-040 E E E E E E E E E E E E E E E E E E E E 041-060 E E E E E E E E E E E E E E E E [...]

5-8 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station GLOBAL PHANTOM LIST DVS-V6464B V2.10 STATION NUMBER 1 (4094 REMAIN) No. NAME No. NAME No. NAME No. NAME  0001 GPHA001 0002 ....... 0003 ....... 0004 ....... 0005 ....... 0006 ....... 0007 ....... 0008 ....... 0009 ....... 0010 ....... 0011 ....... 0012 ..[...]

5-9 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  EDIT GLOBAL PHANTOM DVS-V6464B V2.10 STATION NUMBER 1   (4094 REMAIN) 0001 GPHA001  LEVEL: 1=VID 2=A1 3=A2 4=4 5=5 6=6 7=7 8=8 OUT001 <IN001 VID .... .... .... .... .... .... .... OUT002 <IN002 VID A1 .... .... .... .... .... ....[...]

5-10 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  DESTINATION NUMBER TRANSCODE DVS-V6464B V2.10 STATION NUMBER 1   1.....7.........  1.....7.........  001=OUT001 P DST-012 | 002=OUT002 Hong Kong | 003=OUT003  London | 004=OUT004 P Market |  005=OUT005 New York | 006=OUT006 P Tokyo | 007=[...]

5-11 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station K : RESET TO DEFAULT TABLE K : DEFAULT TABLE Purpose This menu is used to initialize the table data. Do not perform this menu when modifying the table data. Setting Procedure 1. Select menu item [K]. The message “RESET TO DEFAULT TABLE? (y/n)” will be displayed at the bo[...]

5-12 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  PHYSICAL NUMBER ASSIGNMENT DVS-V6464B V2.10 STATION NUMBER 1  DESTINATION LEVEL No. NAME VID A1 A2 4 5 6 7 8  001 OUT001 001-1 001-2 017-3 001-4 001-5 001-6 032-7 ...-. 002 OUT002 002-1 ...-. 018-3 002-4 005-5 002-6 031-7 ...-. 003 OUT003 003-1 003-2[...]

5-13 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station  SET INHIBIT TABLE DVS-V6464B V2.10 STATION NUMBER 1  DEST. SOURCE 001 01--08 09--16 17--24 25--32 33--40 41--48 49--56 57--64  OUT001 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx OUT002 xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxxx xxxxxxx[...]

5-14 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station N : SET DESCRIPTION NAME GROUP Purpose To register the Description names required for each remote control unit, set the group of Description names. Up to eight such source and destination groups can be set. (Up to 160 names can be registered for one group.) The top half of t[...]

5-15 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station Station number of the secondary station on monitor S-BUS Station number of the primary station on monitor S-BUS . . . . . Transferring Data to the Secondary Station on the Monitor S-BUS To transfer the data on the group setting screen currently displayed to a secondary stati[...]

5-16 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station SET TIE LINES  DVS-V6464B V2.10 STATION NUMBER 1  SOURCE GROUPS S001: 010( OUT010 ) S002: ...(.......) S003: ...(.......) S004: ...(.......) 011( OUT011 ) ...(.......) ...(.......) ...(.......) 012( OUT012 ) ...(.......) ...(.......) ...(.......) 013([...]

5-17 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station 8. Select the number of net group with cursor keys and press [Enter] to set the input mode. Set the signal path between two routing switchers, using the combination of the “OUT of the front stage” > “IN of the latter stage”. 9. Input the source number and the dest[...]

5-18 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station CHANGE CROSSPOINT DVS-V6464B V2.10 STATION NUMBER 1 LEVEL=1 DEST SOURCE DEST SOURCE DEST SOURCE DEST SOURCE   OUT001 -IN001 OUT002 -IN002 OUT003 -IN003 OUT004 -IN004  OUT005 -IN005 OUT006 -IN006 OUT007 -IN007 OUT008 -IN008  OUT009 -IN009 OUT010 -IN010 OU[...]

5-19 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station CHANGE CROSSPOINT DVS-V6464B V2.10 STATION NUMBER 1 LEVEL=ALL LEVEL: No. out 1=VID 2=A1 3=A2 4=4 5=5 6=6 7=7 8=8 001 OUT001 IN001 IN001 IN017 IN001 IN001 IN001 IN001 ..... 002 OUT002 IN002 IN002 IN018 IN002 IN002 IN002 IN002 ..... 003 OUT003 IN003 IN003 IN0[...]

5-20 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station 1993.02.03-22:24(Y.M.D-H:M) READ TIME CHANGE TO = 1993.02.03-22:24  Ctrl-E:RETURN TO MENUÅ CALL STATION NUMBER ?   Ctrl-E:RETURN TO MENU R : CALL SECONDARY STATION Purpose This menu is used to call the menu of the secondary station connected to the S-BUS of t[...]

5-21 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station SELECT CONTROL MODE DVS-V6464B V2.10 STATION NUMBER 1  CHANNEL A --- REMOTE FUNCTION = CONVERT RS422(CART+) to S-BUS  CHANNEL B --- REMOTE FUNCTION = DIRECT    Ctrl-E:RETURN TO MENU U : SELECT REMOTE Purpose This menu is used to control the routing sw[...]

5-22 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station V : SELECT WARNING DISPLAY Purpose This menu is used to set the warning message displayed on the system status screen. Setting Procedure 1. Select menu item [V]. 2. Press [V] , [Enter] , and the setting conditions dis- played will be switched.(“ON” → “OFF”). “OFF[...]

5-23 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station SYSTEM STATUS LOG DVS-V6464B V2.10 STATION NUMBER 1  1990.10.12-15:42 S-BUS LINK DISCONNECTED 1990.10.27-09:28 STARTED BY BKS-R1601 Ver3.10 IN STATION 11 1990.11.03-05:31 STARTED BY BKS-R3204 Ver3.11 IN STATION 32 1991.01.14-13:51 MISSING REFERENCE SIGNAL IN S[...]

5-24 ROUTING SWITCHER SYSTEM (E) 5-1. Setting Items of the Primary Station DISPLAY TABLE DATA DVS-V6464B V2.10 STATION NUMBER 1  0000:49 4E 00 00 00 00 00 00 4F 55 54 00 00 00 00 00 : IN......OUT..... 0010:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 : ................ 0020:00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 : ..........[...]

5-25 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station (Input) 512 1 1 164 101 101 164 512 (Output) Setting Area DVS-V6464B Location 5-2. Setting Items of the Secondary Station A:SET UNIT LOCATION Purpose This menu is used to set the input/output location of the routing switcher. Setting Procedure 1. Select menu item [A]. 2. U[...]

5-26 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station G:UPDATE BACKUP CONTROLLER Purpose This menu is used to copy the table data stored in the main CPU board of the secondary station to the backup CPU board. This setting is valid only when the optional CPU board is installed to the secondary station. Setting Procedure 1. Sel[...]

5-27 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SONY ROUTING SYSTEM SETUP MENU BKS-R3204 V3.10 STATION NUMBER 16 SET PHANTOM TABLE (PHANTOM:DESTINATION<SOURCE-LEVEL) (G.PHANTOM NAME:NUMBER) IN001 :OUT001 <IN001 -0 IN002 :OUT001 <IN002 -0 IN003 :OUT001 <IN003 -0 IN004 :OUT001 <IN004 -0 IN005 :OUT0[...]

5-28 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station TAKE button is pressed Checks if the selected name exists on the phantom table Process nothing Output the signal switching request Check if the data set in the phantom table is the global phantom Omit the source and destination to which the secret or protect is set Check t[...]

5-29 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SONY ROUTING SYSTEM SETUP MENU BKS-R3202 V3.10 STATION NUMBER 6     A:Copy All table P:Copy PHANTOM table B:Copy PANEL table D:Copy Available Destination table Inputs A,P,B,D,0-9 Selected = A Station Number ?  Ctrl-E:MENU Ctrl-D:RETURN K[...]

5-30 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station M: SET MONITOR FUNCTION (Except for HDS-V3232) Purpose This menu is used to set the monitor S-BUS. As this monitor function is controlled by the local CPU, it has a monitor data link that is independent from the standard S- BUS data link. Therefore, it is necessary to set [...]

5-31 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station N : SET PANEL TABLE (BKS-R1607/R1608/R3204/R3205/R3209/R3210/R1617/R1618/R3219/R3220/R1621) Purpose This menu is used to assign source/destination name to each source/destination button. Setting Procedure 1. Select menu item [N]. 2. Select a button number using the cursor.[...]

5-32 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station N : SET PANEL TABLE (BKS-R3206/R3216) Purpose This menu is used to assign source name and destination name to be displayed. Setting Procedure The setting procedure is the same as that of menu item [N : SET PANEL TABLE] (BKS-R3204). m 1. The setting of [SET PANEL TABLE (SOU[...]

5-33 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SONY ROUTING SYSTEM SETUP MENU BKS-R3202 V3.10 STATION NUMBER 7 SELECT DESTINATION NAME 001=OUT001 002=OUT002 003=OUT003 004=OUT004 005=OUT005 006=OUT006 007=OUT007 008=OUT008 009=OUT009 010=OUT010 011=OUT011 012=OUT012 013=OUT013 014=OUT014 015=OUT015 01[...]

5-34 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station . . . . . Procedure of setting SELECT SOURCE NAME 1. Select an item to set using the cursor key. 2. Pressing [Enter] establishes the source name input mode. 3. Enter the “Type + No.” name or description name. 4. Press [Enter] to confirm the input contents. Example of s[...]

5-35 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station Example of setting : SRC TOP-SRC END=DST TOP-DST END indicates the applicable range of the offset-type phantom on the screen of example setting. When the range from IN001 to IN008, and the range from OUT001 to OUT004 are to be set as the applicable range, enter as follows.[...]

5-36 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station 12 3 4 OUT1 OUT2 OUT3 OUT17 OUT18 OUT19 IN Level1 Level1 IN 56 7 8 Expansion input Switcher A Switcher B R : SET ROUTE (BKS-R1607/R1608/R3209/R3210/R3216/R1617/R1618/R3219/R3220/R1621) Purpose This is the function to display the source names that are expanded by combining [...]

5-37 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SONY ROUTING SYSTEM SETUP MENU BKS-R3206 V3.10 STATION NUMBER 16 GROUP No. = 1 No. Terminal Name Description Name No. Terminal Name Description Name 1 DST- 001 OUT001 London 2 DST- 002 OUT002 NewYork 3 SRC- 001 IN001 Berlin 4 SRC- 002 IN002 Moscow 5 SRC- 003[...]

5-38 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SELECT REMOTE PROTOCOL DVS-V6464B V2.10 STATION NUMBER 1  SELECT RS-422 CHANNEL ? (A--B) A   Ctrl-E:RETURN TO MENU SELECT REMOTE PROTOCOL DVS-V6464B V2.10 STATION NUMBER 1  CHANNEL = A REMOTE = CART+ UA2 = 10000000  SET DESTINATION TRANS[...]

5-39 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station V : DISPLAY UNIT STATUS (Except for HDS-V3232) Purpose This menu is used to display the status of the hardware such as boards, etc. n For the input/output boards and matrix boards of DVS- V3232B, channel 1 to 32 will be displayed. And FAN 1 and 2 will be displayed for DVS-[...]

5-40 ROUTING SWITCHER SYSTEM (E) Y : SET DISPLAY MODES (BKS-R3216/R1617/R1618/R3219/R3220/R1621) Purpose This menu is used to set the display mode. The setting contents are as follows. DISPLAY MODES (BKS-R3216/R3220): Selects the display type. (when J : NAME STYLE (DESCRIP.NAME) is selected in the primary station menu.) NORMAL = Normal display 2 + [...]

5-41 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station Z : SELECT SDI FORMAT (Except for HDS-V3232) Purpose This menu is used to set the format of signals fed to the input/output board of DVS-V3232B and DVS-V6464B with the control terminal. This setting is available when the manual switch for the format on each input/output bo[...]

5-42 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SONY ROUTING SYSTEM SETUP MENU BKS-R3204 V3.10 STATION NUMBER 14 SET PANEL STATUS  PANEL MODE = 1 1:STAND ALONE 2:MOTHER 3:DAUGHTER  SET SOURCE OR DESTINATION ASSIGNMENT KEY 1- 8 = S KEY 9-16 = S KEY 17-24 = S KEY 25-32 = S S:SOURCE D:DESTINAT[...]

5-43 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SONY ROUTING SYSTEM SETUP MENU BKS-R3205 V3.10 STATION NUMBER 11 SET PANEL STATUS  PANEL MODE = 1 1:STAND ALONE 2:MOTHER   SET SOURCE OR DESTINATION ASSIGNMENT KEY 1- 8 = S KEY 9-16 = S KEY 17-24 = S KEY 25-32 = S S:SOURCE D:DESTINATION  SE[...]

5-44 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station LEVEL MODE * 1 SINGLE = Single level selection MULTI = Multiple level selection DEST SELECTION * 2 DISABLE = Change of destination from the panel is prohibited. ENABLE = Change of destination from the panel is allowed. ILLUMINATION LEVEL * 3 Brightness of the button indica[...]

5-45 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station n Checksum can be displayed from version V1.10 of the BKS series. Use checksum to check if the program data is correct, in addition to the version number indication. (The PGM CHECKSUM is mainly used.) The following three types of checksum are available. BOOT CHECKSUM=D039 [...]

5-46 ROUTING SWITCHER SYSTEM (E) 5-2. Setting Items of the Secondary Station SWITCHING FIELD HDS-V3232 V2.10 STATION NUMBER 1             SWITCHING FIELD FIELD    F2:FIELD S:Table Set Ctrl-E:RETURN TO MENU  Z : SWITCHING FIELD (HDS-V3232 only) Purpose This menu is used to set the crosspoint switchi[...]

5-47 ROUTING SWITCHER SYSTEM (E) 5-3. Setting Items of the Primary Station on Monitor S-BUS (BKDS-V3292B only) SET MONITOR FUNCTION DVS-V6464B Monitor Bus I/F V2.10  MODIFICATION COMMAND   F: SET SCTIVE UNIT NUMBER   M: SELECT MONITOR FUNCTION (COMBINED)   R: CALL SECONDARY STATION     Ctrl-E:RETUR[...]

5-48 ROUTING SWITCHER SYSTEM (E) 5-3. Setting Items of the Primary Station on Monitor S-BUS (BKDS-V3292B only) M: SELECT MONITOR FUNCTION Purpose This menu is for setting the connection to use the input monitor and output monitor in series or independently. To monitor the input and output monitor lines using separate monitors, set the SEPARATED mod[...]

5-49 ROUTING SWITCHER SYSTEM (E) 5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only) SET MONITOR FUNCTION DVS-V6464B Monitor Bus I/F V2.10 STATION NUMBER 23  MODIFICATION COMMAND  M: SET AVAILABLE MONITOR LINE INPUT=( ENABLE )OUTPUT=( ENABLE )   Ctrl-Z:RETURN MONITOR SYSTEM SETUP MENU. BKS-R3204 V3.1[...]

5-50 ROUTING SWITCHER SYSTEM (E) 5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only) MONITOR SYSTEM SETUP MENU BKS-R1607 V1.00 STATION NUMBER 3 SET PANEL TABLE(SOURCE) CONTROL DESTINATION = OUT001 01 KEY=IN001 02 KEY=IN002 03 KEY=IN003 04 KEY=IN004 05 KEY=IN005 06 KEY=IN006 07 KEY=IN007 08 KEY=IN008 09 KEY=..[...]

5-51 ROUTING SWITCHER SYSTEM (E) 5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only) SONY ROUTING SYSTEM SETUP MENU BKS-R1607 V1.10 STATION NUMBER 12 SET PANEL TABLE(SOURCE) CONTROL DESTINATION = OUT244 01 KEY=SRC004 02 KEY=SRC005 03 KEY=SRC006 04 KEY=SRC001 05 KEY=SRC002 06 KEY=SRC003 07 KEY=SRC007 08 KEY=SRC00[...]

5-52 ROUTING SWITCHER SYSTEM (E) 5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only) MONITOR SYSTEM SETUP MENU BKS-R3210 V1.10 STATION NUMBER 6 SOURCE name Description name Description 1 IN001 CAM001 2 IN002 CAM002 3 IN003 CAM003 4 IN004 CAM004 5 IN005 VTR005 6 IN006 VTR006 7 IN007 VTR007 8 IN008 VTR008[...]

5-53 ROUTING SWITCHER SYSTEM (E) 5-4. Setting Items of the Secondary Station on Monitor S-BUS (BKDS-V3293B only) MONITOR SYSTEM SETUP MENU BKS-R1607 V1.00 STATION NUMBER 7 SET PANEL STATUS  DISPLAY MODE = 1 1:STATUS 2:PROMPT PROTECT MODE = 2 1:ON AIR 2:NORMAL PHANTOM PROTECT = 1 1:PART PROT 2:FULL PROT 3:BUTTON LINK PANEL MODE = 1[...]

5-54 ROUTING SWITCHER SYSTEM (E) 5-5. Backup of Setting Data 5-6. When Data is Lost 5-5. Backup of Setting Data The data set using the control terminal will be stored in the RAM on the CPU board. It is however recommended that the setting data be backed up just in case the data is damaged or lost. Data can be backed up easily by using the Sony rout[...]

5-55 ROUTING SWITCHER SYSTEM (E) 5-7. Initialization of Table Data 5-7. Initialization of Table Data There are five ways of initializing the table data. Note that the way to be used depends on which item is initialized. 5-7-1. Initializing Procedure and Corresponding Items DVS-V3232B/V6464B : Initializing Procedure Corresponding Menu Items 1 1. Set[...]

5-56 ROUTING SWITCHER SYSTEM (E) 5-7. Initialization of Table Data HDS-V3232 : Initializing Procedure Corresponding Menu Items 1 1. Set the test switch (S2) on the CPU-251 board to “D”. All items of the primary and secondary stations. 2. Press the reset switch (S8). 2 1. Set the test switch (S2) on the CPU-251 board to “C”. [W : SYSTEM STAT[...]

5-57 ROUTING SWITCHER SYSTEM (E) ODD Field 1 EVEN Field 2 ODD Field 3 EVEN Field 4 RS-422A Switching Command Switching Executed Switching Command Switching Executed ODD Field 1 EVEN Field 2 ODD Field 3 EVEN Field 4 ODD Field 1 EVEN Field 2 ODD Field 3 EVEN Field 4 S-BUS Switching Executed Switching Executed ODD Field 1 EVEN Field 2 ODD Field 3 EVEN[...]

[...]

6-1 ROUTING SWITCHER SYSTEM (E) Section 6 Confirmation of function 6-1. Outline After the hardware and software have been set up, it is necessary to check if the system is working properly before starting the operation. Each routing switcher is equipped with the self-diagnosis function to check the system connection and status of each unit. As soon[...]

6-2 ROUTING SWITCHER SYSTEM (E) LED displays the presence/absence of the signals and setting of the switches independently, irrespective of the self- diagnosis and test mode. Test mode is effective for finding the causes of the error and the faulty sections which have been detected by the self-diagnosis function. It checks LEDs,switches and signal [...]

6-3 ROUTING SWITCHER SYSTEM (E) Lit in Green: Blinking in Green: Blinking in Red: Other errors S-BUS deta link has disconnected Increase in the switcher's internal temperature/Fan has stopped Faulty sync signal detection Faulty crosspoint hardware Increase in the switcher's internal temperature/Fan has stopped S-BUS deta link has been dis[...]

6-4 ROUTING SWITCHER SYSTEM (E) 6-4. Diagnosis Items for Each Model 6-4. Diagnosis Items for Each Model Self-diagnosis Items Error Display Model * * * * * 1 Status Status * * * * * 1 Error No. DVS-V1616 DVS-V3232B DVS-A3232 DVS-R1616 Indicator display Indicator DVS-V6464B DVS-TC3232 HDS-V3232 BVS-V323 BVS-A3232 Checking normal operations O_ O O O O[...]

6-5 ROUTING SWITCHER SYSTEM (E) 1 2 3 4 5 6 7 8 Check the LED displays on the board (As repuired) Counter- measures Normal STEP3 STEP2 STEP1 Turn on the power of the S-BUS data link unit Check the status indicator Check the system status screen Check the menu screen Open the front panel Check the error code Execute the test mode Completion of funct[...]

6-6 ROUTING SWITCHER SYSTEM (E) SONY Digital Routing System DVS-V6464B V2.10  ITEM ROM CHECK SUM  8A65 RAM READ AND WRITE OK REFERENCE SIGNAL OK S-BUS LINK TERMINATE OK REAL TIME CLOCK STARTED 1993.02.03-22.15 STARTED BY DVS-V6464B Ver2.10 IN STATION 1 1993.02.03-22.15 S-BUS LINK DISCONNECTED TO CHANNEL [...]

6-7 ROUTING SWITCHER SYSTEM (E) 1990.10.12-15:42 S-BUS LINK DISCONNECTED 1990.10.27-09:28 STARTED BY BKS-R1601 Ver3.10 IN STATION 11 1990.11.03-05:31 STARTED BY BKS-R3204 Ver3.11 IN STATION 32 1991.01.14-13:51 MISSING REFERENCE SIGNAL IN STATION 1 1991.02.01-11:15 POWER SUPPLY UNIT B DOWN IN STATION 4 1991.02.04-06:11 X-POINT ERROR I[...]

6-8 ROUTING SWITCHER SYSTEM (E) X-POINT ERROR IN STATION * * * TEMPERATURE RISE OR FAN STOP IN STATION * * * MISSING REFERENCE SIGNAL IN STATION * * * CHANGED OVER TO BACKUP POWER SUPPLY IN STATION * * * 6-6. Function Check with Control Terminal 6-6-4. Contents and countermeasures of the error messages The control terminal will display eleven types[...]

6-9 ROUTING SWITCHER SYSTEM (E) DIFFERENT CHECK SUM= ???? IN STATION * * * Check sun value S-BUS LINK DISCONNECTED CHANGED OVER TO BACKUP CPU IN STATION * * * STARTED BY * * * _ * * * * * Ver * . * * IN STATION * * * 6-6. Function Check with Control Terminal Content : This message is displayed when an error has been detected as the result of ROM ch[...]

6-10 ROUTING SWITCHER SYSTEM (E) STATION * * * FAILURE(DISCONNECTED OR POWER DOWN) VALID INPUT OR OUTPUT BOARD IN STATION * * * INVALID INPUT OR OUTPUT BOARD IN STATION * * * 6-6. Function Check with Control Terminal Content : This message is displayed when communication with the station set at the menu item [F] is stopped. Countermeasure : Check t[...]

7-1 ROUTING SWITCHER SYSTEM (E) Section 7 Change Information on DVS-128/HDS-X3000 Series and DVS-V3232M/V6464M 7-1. Outline (DVS-128/HDS-X3000 Series) The S-BUS protocol is extended of its virtual matrix size from 512 to 1024. At the same time the following functions are changed. . Number of SOURCE/DEST TYPEs is extended from 16 to 32. . Selection [...]

7-2 ROUTING SWITCHER SYSTEM (E) 7-2. Changed Menu (Primary Station Setting Items) 7-2. Changed Menu (Primary Station Setting Items) n The menu screen shown below is based on the DVS-128. Initial screen (DVS-128/HDS-X3000 Series) When the [Ctrl] _ [X] key is pressed after the main power is turned on, the following display appears. Example of Initial[...]

7-3 ROUTING SWITCHER SYSTEM (E) SOURCE/DEST/PHANTOM TYPE DVS-128 V1.00 STATION NUMBER 1   TYPE:32  0=IN 1=OUT 2=.... 3=.... 4=.... 5=.... 6=.... 7=....  8=.... 9=.... A=.... B=.... C=.... D=.... E=.... F=....  G=.... H=.... I=.... J=.... K=.... L=.... M=.... N=....  O=.... P=.... Q=.... R=.... S=.... T=.... U=.... V=.... [...]

7-4 ROUTING SWITCHER SYSTEM (E) SET TIE LINES DVS-128 V1.00 STATION NUMBER 1  --PATHS 1------------------------------------------------------------------ SOURCE: SOURCE No. DESTINETION No. ROUTE: SOURCE No. DESTINETION No. L1 0001 - 0080 0001 - 0004 L2 0081 - 0082 0080 - 0086 DESTINATION:SOURCE No. DESTINETION No.  L1 0083 - 0089 [...]

7-5 ROUTING SWITCHER SYSTEM (E) SET TIE LINES DVS-128 V1.00 STATION NUMBER 1  --PATHS 1------------------------------------------------------------------ SOURCE: SOURCE No. DESTINETION No. ROUTE: SOURCE No. DESTINETION No. L1 0001 - 0010 0009 - 0010 L2 0011 - 0012 0017 - 0018 DESTINATION:SOURCE No. DESTINETION No.  L1 0021 - 0022 [...]

7-6 ROUTING SWITCHER SYSTEM (E) SET SOURCE ASSIGNMENT DVS-128 V1.00 STATION NUMBER 1  VID A-A1 A-A2 A3 A4 REM TBC SAPS 0001 IN001 IN001 IN001 IN001 IN001 IN001 IN001 IN001 0002 IN002 IN002 IN002 IN002 IN002 IN002 IN002 IN002 0003 IN003 IN002 IN002 IN002 IN002 IN003 IN003 IN003 0004 IN004 IN002 IN002 IN002 IN002 IN004 IN004 IN004?[...]

7-7 ROUTING SWITCHER SYSTEM (E) DISPLAY UNIT STATUS DVS-128 V1.00 STATION NUMBER 1  INPUT BOARD MAIN CONNECTOR STYLE REFERENCE 01-32 VALID VALID Analog Video A 33-64 INVALID INVALID Analog Audio B 65-96 INVALID INVALID Digital Audio B 97-128 INVALID INVALID ------------ -  OUTPUT BOARD MAIN CONNECTOR STYLE REFERENCE 01-32[...]

7-8 ROUTING SWITCHER SYSTEM (E) V : DISPLAY UNIT STATUS (HDS-X3000 Series) Purpose Purpose is to display the internal status of the equipment. There are no setting on this screen. Press [Ctrl] _ [E] to return to the menu screen of the secondary station. Example of Display Screen (HDS-X3400) Example of Display Screen (HDS-X3600) DISPLAY UNIT STATUS [...]

7-9 ROUTING SWITCHER SYSTEM (E) FANA, FANB : ROT/STOP Displays whether the fan on the matrix board is rotating or not. FANn : ROT/STOP Displays whether the fan of the main unit (except the power supply unit) is rotating or not. FRONT PANEL : BKS-R3400/INVALID Displays whether the option switch is attached to the front of the HDS-X3400 or not. n If [...]

7-10 ROUTING SWITCHER SYSTEM (E) Operating Function Keys [F1] : FORMAT (Mode in which the HDS-X3400 is set in the units of the four channels and the HDS-X3600/ X3700 is set in the units of the eight channels) HD SDI (RC) : When the input signal is HD- SDI, the signal is reclocked and is output.) HD SDI (RC PASS) : The input signal is bypassed and i[...]

7-11 ROUTING SWITCHER SYSTEM (E) Z : SELECT SDI FORMAT (DVS-V3232M/DVS-V6464M) Purpose This menu is used to set the format of signals fed to the input/output board of DVS-V3232M and DVS-V6464M with the control terminal. This setting is available when the REM/LOC switch for the format on each input/output board is OFF. Setting Procedure 1. Select me[...]

7-12 ROUTING SWITCHER SYSTEM (E) “AUTO” stands for “AUTO LOCK” mode in which the input signal format (143/177/270/360/540 Mbps) is automatically identified and the equipment runs on an appropriate signal format. The signal format setting can be changed by pressing either [Enter] or [F] . [Enter] [Enter] [Enter] [Enter] [F] or [Enter] [F][...]

7-13 ROUTING SWITCHER SYSTEM (E) Comparison Table between Models Item S-P1 S-P2 BVS-V3232 ( * 1) DVS-V6464B/ BKPF-R70 DVS-128 ( * 3) BKPF-R70A V6464M ( * 2) Dedicated CPU for communication _ 1 212 SOFT MATRIX __ 64 _ 128 A : DISPLAY CONTROL AREA 512 x 512 512 x 512 512 x 512 1024 x 1024 1024 x 1024 B : SET SOURCE/DEST TYPE 16 16 16 32 32 C : SET DE[...]

[...]

A-1 ROUTING SWITCHER SYSTEM (E) Appendix Functions and Menu Items Function Purpose Menu item Station type Standard setting Initializing table data K : RESET TO DEFAULT TABLE Primary station Set/change password P : CHANGE PASSWORD Set time clock T : SET CLOCK Select warning display ON/OFF V : SELECT WARNING DISPLAY Set type name B : SET SOURCE/DEST [...]

A-2 ROUTING SWITCHER SYSTEM (E) Function Purpose Menu item Station type Monitor function Call secondary station R : CALL SECONDARY STATION Primary station Call primary station on monitor S-BUS M : SET MONITOR FUNCTION Secondary station Set active unit number F : SET ACTIVE UNIT NUMBER Monitor S-BUS Select monitor mode M : SELECT MONITOR FUNCTION pr[...]

ROUTING SWITCHER SYSTEM (E) The material contained in this manual consists of information that is the property of Sony Corporation. Sony Corporation expressly prohibits the duplication of any portion of this manual or the use thereof for any purpose other than the operation or maintenance of the equipment described in this manual without the expres[...]

BVS-A3232 (SY) BVS-V3232 (SY) DVS-128 (SY) DVS-A3232 (EK) DVS-RS1616 (SY) DVS-TC3232 (SY) DVS-V1616 (SY) DVS-V3232B (SY) DVS-V3232M (SY) DVS-V6464B (SY) DVS-V6464M (SY) HDS-X3400 (SY) HDS-X3600 (SY) HDS-X3700 (SY) HDS-V3232 (JN) E 3-194-351-06 Printed in Japan Sony Corporation 2000. 7 16 Communication System Solutions Network Company ©1997[...]