SRS Labs MAC-001149 Bedienungsanleitung

15" Liquid Cr ystal Display T ele vision L T0G-15A1 NTSCTVTWEN1203 MAC-001 149 2F , No.362, Ruei-Guang Rd., Neihu District, T aipei City 1 14, T aiwan, R.O.C. TEL: 886-2-87520000 F AX: 886-2-87527092 www .hannspree.com[...]

Table of Contents 1 1. Warranty and Service .................................................... 3 2. Preface .................................................................... ..... 4 3. Description of Warning Symbols ..................................... 5 4. Safety Notices ............................. .................................. 6 5. R[...]

Table of Contents 2 Mute ................................................................ ... 3 9 Video Setting ........................................................... 4 0 Hue ................................................................. ... 4 1 Saturation ........................................................ ... 4 2 Sharpness ..........[...]

3 The instructions on this manual are for the model(s) listed on the front cover . Before you st art reading, check your product number by lookin g at the rear of your TV . Thank you for purchasing our Liquid Crystal Display T e levision (LCD TV). With this product, you will be able to enjoy superior audio and video while enriching your lifes tyle [...]

4 This manual is designed to assist users in setting up and using the LCD TV . Information in this document has been care fully checked for accuracy; however , no guarantee is given to the correctn ess of the content s. The information in this docume nt is subject to ch ange without notice. Copyright © Copyright 2003 Hannspree, Inc. All rights res[...]

5 Electric Power Notice Electric power may cause personal inju ry and mechanical damage if it is misused. Although safety has been tak en into conside ration during the design and production of this product, electric shock or fire can result when the product is misused. T o prevent potential danger , follow the instructions below when installing, o[...]

6 Power Supply Safety Notes 1. T o avoid electric shocks, do not use an extended p ower cord or an outlet that does not match this pr oduct's plug or leaves the plug exposed. 2. This product has a 3-pin gro unded plug. The th ird pin connect s to ground; do not r emove it. 3. If the power cord or plug is damaged or worn, unplug it immedi- atel[...]

7 Before Y ou Proceed 1. Read the Safety Notices and the User ’s Manual ca refully before turning the pro duct on. 2. Keep your User ’s Manual in a safe place for future reference. Keep the box and packaging in case the pr oduct needs to be shipped in the future. 3. Follow the product and warn ing label instructions. 4. Any changes or modificat[...]

8 Optimal V iewing Dist ance[...]

9 Import ant Safety Instructio ns 1. Read these instructions. 2. Keep these instructions. 3. Heed all warnings. 4. Follow all instructions. 5. Do not use this apparatus near water . 6. Clean only with a dr y cloth. 7. Do not block any ven t ilation openings. Insta ll in accordance with th e manufacturer ’s instruct ions. 8. Do not instal l near a[...]

10 10. Protect the power cord from being walked on or pinched particularly at th e plug, conve- nience receptacles, and the point where they exit from the app aratus. 1 1. U se only with a cart, stand, tripod, bracket, or table specified by the manufa cturer , or sold with the apparatus. Whe n a cart is used, use caution when movi ng the cart/app a[...]

11 Personal Safety T o avoid overloading t he power supply , do not plug too many electrical devices into an outlet or extension cable. Dangerous high-volt age electric power compo - nents are lo cated inside the TV . T o avoid electric shock, do not disassemble the casing. Do not place or drop met als, small objects, or flammable materials in t he[...]

12 Inst allation T o avoid damage to power circuits, do not place the TV in locations where there is excessive steam or dust. Do not place the TV on a bed, sofa, carpet, or in a sealed cabinet to avoid blocking the product's vent s. Install the outdoor antenna far from p ower trans- mission lines to av oid possible danger . Remove the power co[...]

13 Operation Maintenanc e This product is designed for power sources as labeled on the casing. Avoid using any other power accessories to avoid electric sho c k or other damage. The plug can be inserted into an outlet in only one direction. Notify a qualified service techni- cian if you cannot plug it in correctly . If there is any problem that can[...]

14 FCC Compliance S tat ement 1 This device complies with part 15 of the FCC Rules. Operation is sub- ject to the following two conditions: (1) This device may not cause harm- ful interference, and ( 2) this devi ce must accept any interference received, including inter f erence that may ca use undesired oper ation. This equipment has been tested a[...]

15 DOC Compliance Notice 1 This digital app aratus does not exc eed the Class B limits for radio noise emissions from digital app aratus as set out in the Radio Inte rference Regulations of the Canadian Dep artment of Communications.This device complies with Canada ICES-003 Class B. CE Conformity S tat ement 2 This device complies with the requirem[...]

16 Thank you for purchasing this 15-inch Liquid Crystal Display TV. Y our LCD TV is designed to be safe, versatile, and easy to use. The sturdy design makes it a fun addition to any room. Y ou can watch broadcast or cable televi- sion channels, and easily connect a VCR, VCD or DVD player or a game device to the st andard RCA and S-Video input ports[...]

17 Make sure the following component s are included in the box. Cont act your vendor immediately if any thing is missing or damaged. TV User ’ s Manual Quick St art Guide W arranty and Service Manual Wire Material Package VGA Cable Power Cord Power Adapter 4-IN-1 Cable RCA Jack x 3 User's M anual Q uick Start G uide W a r ra n ty a n d s e r[...]

18 F r ont View Description Function 1 Power T urns the TV on and off. 2 Power L ED Green LED indicates power on. 3 Mute In TV/ A V mode, press this button to mute the audio. 4 Source Selects the input source to be displayed (TV /CA TV , A V 1 , AV 2 or PC). 5 Menu T urns the On-Screen Display (OSD) menu on and of f. 6 Select channel Changes channe[...]

19 Input and Output P or ts Description Function 1 R-AUDIO Connects to a right audio (red) cable 2 L-AUDIO Connects to a lef t audio (white) cable 3 VIDEO Connects to a video (yellow) cable ANT DC-IN LINE OUT VGA LINE IN AV 2 R-AUDIO-L VIDEO 12 3 4 5 6 7 8 9[...]

20 4 AV 2 Use the included 4 -IN-1 Audio/ Vi deo cable to connect exter - nal device s, such as a VCR, VCD, or DVD player , CVBS RCA cables or a game device. Audio Input: A V connectors white and red audio cables. Video Inp ut: A V connector video (yellow) or S-V ideo cables. 5 ANT Connects to a n antenna or CA TV cable television line. 6 DC 12V Co[...]

21 Connecting to an Antenna or Cable TV 1 Connect one end of the UHF or CA TV cable to ANT Jack (VHF/UHF IN Jack) on th e back of the TV . 2 Connect the other en d of the VHF/ UHF (Antenna) or CA TV cable to the antenna socket or CA TV cable. Note If you cannot receive channels after connecting to an antenna or cable TV line, try scanning for chann[...]

22 Connecting to A V Devices Connect external devices such as a VCR, VCD or DVD playe r , or video game to the TV using the 4-IN-1 cable. Connecting to a V CR/VCD/DVD Player The illustration presented here shows how to connect the TV to a VCR, VCD or DVD player . Actual c onnections may vary according to the make and model of the device. Refer to t[...]

23 Connecting to a Video Camera The instructions presented here are a general guide to connecting the TV to a camcorder or other type of digita l camera. Actual connec- tions may vary according to the make and model of the device. Refer to the user’s manual included with th e camcorder or camera for more detailed instruction s. Note The cables ar[...]

24 Connecting to a Game Device The instructions presented here are a general guide to connecting the TV to a game device using t he RCA Jacks provided (some game devices may require a unique ada pter that is not provided). Actual connections may vary according to the make and model of the game device. Refer to the user’s manual included with the [...]

25 Connecting Exter nal Speak er s or Headphones External speakers or head phones may be used to listen to the TV rather than using the built-in speakers. Connect external speakers or headphones to the speaker line out port as illustrated. Notes • External speakers or headphones are not included with the product. • The internal TV speakers will[...]

26 Connecting to a PC Y ou can connect the TV to a PC and use it as an external monitor . Connect the TV’ s VGA port to the PC’ s VGA port. Connect the TV’s line in port to the PC’ s line out port to listen to the PC’s aud io output on the TV’s speakers. Refer to the following illustration. Note Y ou can connect the line out port of a C[...]

27 Connecting the P owe r Adapter 1 Connect the power cord to the power adapter as illustrated. 2 Plug the power adapter connector in to the DC-IN input jack on the rear panel of the TV . 3 Insert the three-pronged plug at the other end of the power cord into a powe r outlet. DC-IN input jack ANT DC-IN LINE OUT VGA LINE IN AV2 R-AUDIO-L VIDEO Power[...]

28 Using the Remote Co ntrol For best results, use the remote control within a distance of 5 meters from the front of the TV’ s signal sensor . Do not exceed an angle of 30 degrees when pointing at the signa l sensor . Refer to the following illustration. 10 Using the TV[...]

29 T ur ning the TV On and Of f 1 Press the POWER button on the remote control (or control panel). The power LED on the front of the TV changes from red to green , indicating that the power has been turned on. 2 Press the POWER button again; in A V mode, the powe r LED changes from green to red , indicating that the TV is in (of f) mode. When signa[...]

30 Switching Source Signals Press SOURCE to select the incoming source signal. The current source setting (TV/CA TV , A V1,A V2 or PC ) appears on the upper lef t corner of the screen. Note The TV supports S-V id eo input in addition to normal vid eo and audio signals. The T V detect s the signal type automatically and gives priority to S-Video whe[...]

31 The On-Screen Display (OSD) menu system provides a quick and simple method to adjust your TV’s settings. This chapter describ es how to change each of the available settings. The OSD can be used with either th e remote con trol or the control pane l . Note: The following sectio ns explain how to ad just settings in the OSD menus usin g the con[...]

32 Brightness 1 Press MENU to enter the OSD menus. 2 Press t h e CH UP button o r CH DOWN b ut to n to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast menu. 4 Press t h e CH UP bu tt on to increase the brightness. Press t he CH DO WN bu tt on to decrease the brightness. 5 Press MENU to select Return. 6 Press[...]

33 Contrast 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN bu tto n to select Brightness & Contrast. 3 Press MENU to enter the Bright - ness & Contrast me nu. 4 Press MENU to select Contrast. 5 Press t he CH UP bu tt on to increase the contrast. Pres s th e CH DOWN b ut to n to decrease the contrast. 6 Press MENU [...]

34 Audio Setting Press the MENU button to enter the OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select Audio Setting. 2 Press MENU to ente r the Audio Setting menu. MENU < CH > PC Audio Setting Return Select Menu OK LR T reble Bass Balance SRS ON OFF ON OFF Mute[...]

35 Tr e b l e 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press t he CH UP bu tt on to increase the treble. Press t he CH DOWN but - t on to decrease the treble. 5 Press MENU to select Ret urn. 6 Press t he CH DOWN button t o e x i [...]

36 Bass 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Bass. 5 Press t he CH UP bu tt on to increase the bass. Press t he CH DOWN but - t on to decrease the bass. 6 Press MENU to select Ret urn. 7 Press t he CH DOW[...]

37 Balance 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Balance. 5 Press t he CH UP bu tt on to change the balance to t he right speaker . Press t he CH DOWN button t o change the balance to the lef t speaker . 6[...]

38 SRS This option enables the 3D Surround Sound feature . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select SRS. 5 Press t he CH DOWN button t o t u r n the SRS on. Press th e CH U P button to turn the SRS off. 6 Pre[...]

39 Mute 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct A u d io Setting. 3 Press MENU to enter the Audio Setting menu . 4 Press MENU to select Mute. 5 Press t he CH DOWN button t o t u r n the mute on. Press t he CH UP but - t on to turn the mute off. 6 Press MENU to select Ret urn. 7 Press t he CH DO[...]

40 Video Setting Press the MENU button to enter the OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select Video Setting. 2 Press MENU to ente r the Video Settin g menu. MENU < CH > PC Video Setting Return Select Menu OK GR Hue Saturation Sharpness Color T emp Standard[...]

41 Hue 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press t he CH DOWN button t o increase the red hue. The image becomes more red. Press t he CH UP button t o i nc r e as e t h e green hue. The image becomes more green. 5 Press MENU [...]

42 Saturation 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Saturation. 5 Press t he CH UP bu tt on to increase the saturation. The screen image becomes more vibran t. Press t he CH DOWN bu tt on to decrease the sa[...]

43 Sharpness 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Sharpness. 5 Press t he CH UP bu tt on to increase the sharpness. Press t he CH DOWN b ut to n to decrease the sharpne ss. 6 Press MENU to select Ret urn. [...]

44 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l ec t Vi de o Setting. 3 Press MENU to enter the Video Setting menu . 4 Press MENU to select Color T emp. The following choices are available. Wa r m Press the CH UP button or CH DOWN button to select W arm. St andard Press the CH UP butto[...]

45 TV Setting Press the MENU button to enter OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select TV Setting. 2 Press MENU to ente r the TV Setting menu. MENU < CH > PC TV Setting Return Select Menu OK TV/CA TV MTS Auto Program Manual Program CA TV STD DUAL YES NO[...]

46 TV/CA TV 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct T V Se t t in g . 3 Press MENU to enter the TV Set - ting menu. 4 Select one of the following choices. Receiving Air TV Press the CH UP button or CH DOWN button to select AIR TV when using an antenna to receive TV . Receiving Cable TV Press th[...]

47 MTS 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct T V Se t t in g . 3 Press MENU to enter the TV Set - ting menu. 4 Press MENU to select MTS. The following choices are available. MAIN Press the CH UP button or CH DOWN button to select Main (default), the default audi o signal belonging to a partic[...]

48 DUAL Press the CH UP button or CH DOWN button to select Dual, which enables broadcast of the main signal on one speaker , and the alternate audio signal on the other sp eaker . 5 Press MENU to select Ret urn. 6 Press t he CH DOWN button t o e x i t the TV Setting menu. PC TV Setting Return Adjust Menu Next TV/CA TV MTS Auto Program Manual Progra[...]

49 Auto Program 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e le c t TV Se t t i ng . 3 Press MENU to enter the TV Set - ting menu. 4 Press MENU to select Auto Pr o - gram. 5 Press t he CH D O WN button to s e le c t Ye s . Channel in dicator values scans from 2 to 69 (antenna connection) or fro m 1 to 125 [...]

50 Manual Program This function allows you to search preset ch annels and eras e channels. 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct T V Se t t in g . 3 Press MENU to enter the TV Set- ting menu. 4 Press MENU to select Manual Pro- gram. 5 Press th e CH UP bu tt on to enter the Manual Program menu[...]

51 Channel Add/Erase After you have fou nd a channel using Manual Program, follow the fol lowing instruction to add or erase the chann el . 1 Press MENU to select Add/Erase. 2 Select one of the following options. Add Channel Press the CH DOWN button to select Add. The channel is added to the channel list. Erase Channel Press the CH UP button to sel[...]

52 PC Setting Press the MENU button to enter the OSD menus. 1 Connect product to a PC. 2 Press SOURCE to select PC. 3 Press the CH UP or CH DOWN button to se lect PC. 4 Press MENU to ente r the PC menu. MENU < CH > PC PC Setting Return Select Menu OK H.Position V .Position Phase Clock More Option 50 16 0 1688[...]

53 Horizontal Position 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press t h e CH UP button t o m ov e th e display to the r ight. Press t he CH DOWN bu tt on to move the display to the left. 5 Press MENU to select Return. 6 Press [...]

54 V ertical Position 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU t o select V .Posi tion. 5 Press t he CH UP button t o mo v e t h e display up. Press t he CH DOWN bu t - to n to move the display down. 6 Press MENU to s[...]

55 Phase 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Phase. 5 Press t he CH UP b ut to n to increase the phase. Press t he CH DOWN but - to n to decrease the phase. 6 Press MENU to select Return. 7 Press t he C[...]

56 Clock 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select Clock. 5 Press t he CH UP b ut to n to increase the clock. Press t he CH DOWN but - to n to decrease the clock. 6 Press MENU to select Return. 7 Press t he C[...]

57 Color T emperature 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button t o s e le c t P C S e t ti n g . 3 Press MENU to enter the PC Set - ting menu. 4 Press MENU to select the More option. 5 Press t he CH UP b ut to n to enter the Color T emp menu. 6 Press MENU to selec t Color T emp. Wa r m Press the CH DOWN butt [...]

58 User The User option enables users to make their own color settings. Press the CH UP butt on to select User . The user menu appears. – Press MENU to select User R, User G , or User B. – Press the CH UP button or the CH DOWN button to increa se or decrease the selected color tem - perature. 7 Press MENU to select Return. 8 Press t he CH DOWN [...]

59 Miscellaneous Setting Press the MENU button to enter the OSD menus. 1 Press t he CH UP button o r CH DOWN b ut to n to select Miscellaneous. 2 Press MENU to enter the Mis- cellaneous menu. MENU < CH > PC Return Select Menu OK Language Sleeper OSD Display Time Setting More Option OFF English ON OFF Miscellaneous[...]

60 Language 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella - neous menu. 4 Press t he CH UP button o r CH DOWN button to select Chinese or English. 5 Press MENU to select Ret urn. 6 Press t he CH DOWN button to e x it the Miscellaneous menu. PC Miscell[...]

61 Sleeper The Sleeper turns the TV off automatically af ter a set period of time . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select Sleeper . 5 Press t he CH UP button or CH DOWN bu tt on to select a power off time: ?[...]

62 OSD Display When set to Off, the OSD disp lay (source data on top left corner of th e TV screen) tu rns off after approximat ely 5 seconds. When se t to On, the OSD does not turn off automatically . . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- [...]

63 Time Setting This setting allows you to set the TV clock . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to s e l e c t Tim e S e t t i ng . 5 Press th e CH UP bu tt on to enter the T ime Setting menu. 6 Press MENU to sele[...]

64 OSD Background This setting allows you to make the OSD background tra nsparent or opaque . 1 Press MENU to enter the OSD menus. 2 Press t he CH UP button or CH DOWN button to s e l e ct Miscellaneous. 3 Press MENU to enter the Miscella- neous menu. 4 Press MENU to select More Options. 5 Press th e CH UP bu tt on to enter the More Options menu. 6[...]

65 Reset The Reset function returns all of your TV’s user settings to their factory defaults. W arning: The reset fun ction will erase all of your custom and favorite channel settings, and will reset all displa y settings (such as contrast, bright- ness, etc.) to the factory de fault values. The reset function cannot be reversed once it begins. 1[...]

66 By default, OFF is already selected (highlighted in ye llow). The TV imme- diately resets when ON is selected and you see the messa ge on the screen. 8 Press MENU to select Ret urn. 9 Press t he CH DOWN button t o e x i t the More Option menu. Reset ...[...]

67 T urn the power off before you begin cleaning the TV. For best results, use a clean lens cloth to remove dust and fingerprint s from the screen. Do not wipe the shell of the TV with alcohol, methanol, gasoline or oil products to avoid dam- aging the finish. Wipe t he shell with a dry sof t cloth and use neutra l cleaning fluids. If your model ha[...]

68 Situation Solution No picture and sound. • Connect the po wer cord properly . • Press t he POWER button on the control panel or remote control. • Press the SOURCE button to cycle through connected video sources. •P r e s s CH UP or CH DOWN to switch to other TV stations. • Check the TV/CA TV OSD settings. See “TV/CA TV” on page 46.[...]

69 No sound but have image. • Make sure the source device is functioning properly . • Set the volu me to a higher level. • Make sur e the audio cable is connected securely . • Turn the mute off. Screen image turns over . • Make sure the video signal cable is con- nected properly . Snow appears on the screen. • Adjust the location of the[...]

70 L T0G-15A1 LCD Panel Size 15-inch TFT Aspect Ratio 4:3 Best Resolution 1024 (horizontal) x 768 (vertical) Maximum Display Area 304.1 mm (H) x 228.1 mm (W) TV System NTSC Video System VGA input (15 pin D-SUB), S- Video Input and Compos- ite Video Input (through the 4-IN-1 cable) Audio System Line in 10-pin mini-DIN (Audio Input through the 4-IN -[...]

71 Aspect Ratio The ratio of width to height of a film, i mage or display screen. Broadcast TV Broadcasting video signals using high-frequency ele ctromagnetic waves to distribute television ch annels to viewers (standard TV broadcast). CA TV Community Antenna T elevisi on, the original name for cable TV . A television distribution system that uses[...]

is a trademark of SRS Labs, Inc. SRS technology is incorpo- rated under license from SRS Labs, Inc.[...]