StarTech.com SV1107IPEXT Bedienungsanleitung

SV110 7IPEX T KVM over IP with Virtual Media[...]

FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital de- vice, pursuant to par t 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interf erence in a residential installation. This equipment generates, uses and can radiate radio frequency ener[...]

Instruction Manual i Instruction Manual T able of Contents Introduction ................................................................................... 1 Features ...................................................................................... 1 P ackage Contents ....................................................................... 1 Ha[...]

Instruction Manual ii User Station Filtering – MAC Addresses ..................................... 21 Custom SSL Cer tificates ............................................................. 21 User Management ....................................................................... 22 Customization ..................................................[...]

Instruction Manual 1 Introduction The SV1107IPEXT Server Remote Control KVM ov er IP with Vir tual Me- dia capability enables simple management of remote servers from any- where in the world, through remote administrative control, while pro viding a conv enient wa y to monitor computers and ser vers ov er a network, or ov er the Internet. The SV110[...]

Instruction Manual 2 Hardware Requirements For best results , we recommend that the computers used to access the SV1107IPEXT control unit hav e at minimum a P entium III 1 GHz proces- sor , with the screen resolution set to 1024 x 768. Browsers must support 128-bit SSL data encr yption • Recommended Internet connection speed: at least 128 kbps[...]

Instruction Manual 3 Hardware Guide 1 2 3 4 5 Component Description 1 Reset Switch System Reset: Pressing and holding this switch in f or more that three seconds performs a system reset Restore Factory Default Settings: P ower off the SV1107IPEXT , then press and hold the reset switch for at least 3 seconds while reconnecting po wer Please Note: Th[...]

Instruction Manual 4 Hardware Guide - Cont’d Please Note: if you are using a wireless k eyboard/mouse set, connect the receiver to the K eyboard por t of the KVM cable Component Description 1 P ower Jac k The power adapter connection 2 PC/KVM P ort The connection for the cab le that links the SV1107IPEXT to your computer 3 USB Console P ort This [...]

Instruction Manual 5 Computer Preliminary Setup Find your computer’ s IP address and default Gate wa y b y doing the follo w- ing: Click on 1. Start , then RUN . Enter 2. CMD in the text bo x. Click on [ 3. OK ] or press the [ Enter ] ke y . When the command line window opens, T ype 4. ipconfig , then press Enter : Look for the heading that sa y[...]

Instruction Manual 6 SV1107IPEXT Preliminary Setup Connect the SV1107IPEXT and your computer to y our network using the follo wing diagram. This is a preliminary set up, so no other connections are needed. Most home networks use automatic IP Addressing, and the SV1107I- PEXT is provided with a def ault fix ed IP address of 192.168.0.60. There- for[...]

Instruction Manual 7 Windows XP and 2000 Locate, and doub le-click on the 1. Network Connections icon, within the Windows Control P anel. Right-click on 2. Local Area Connection (or Wireless network connection) Select 3. Properties . Under the General tab highlight Internet Protocol TCP/IP Click on the 4. Pr operties button. Click on the Radio b ut[...]

8 Instruction Manual SV1107IPEXT Initial Conguration Open your web bro wser . Y ou will get a P age cannot be displa yed 1. error message, this is normal. In the Address line, type: 2. http:// 192.168.0.60 , then press Enter . When the cer tificate windows pop 3. up , accept them. When the below screen appears, log into the SV1107IPEXT : 4. Use[...]

Instruction Manual 9 After logging in, click on the 5. Network icon (sho wn below) along the top of the window . Select 6. Set IP Address manuall y (A static IP Address is preferred). The actual address you use is dependent on y our network’ s address range: As an example: In the preliminary set up, the IP Address noted is 192.168.1.16, so the IP[...]

Instruction Manual 10 For no w leav e the rest of the settings at their default values (the y will 8. be cov ered later). Click on Apply , then Logout. The SV1107IPEXT will reset. (It is 9. impor tant to log out so the SV1107IPEXT will close the connection). Please Note: Change your computer’ s IP address and Default Gate wa y bac k to the origin[...]

Instruction Manual 11 Hardware Setup Installation T o install the SV1107IPEXT , ref er to the installation diagram on the f ollow- ing page: Use the Console cable pro vided to connect the SV1107IPEXT’ s 1. Console por t, to the local ke yboard, monitor and mouse, the y are color coded for identification. Use the KVM cable pro vided to connect th[...]

Instruction Manual 12 Installation - Cont ’d 1 2 3 4 5 6[...]

Instruction Manual 13 (Optional) Mounting to a Cabinet/Rack If you wish to mount the SV1107IPEXT in a server/storage rac k/cabinet, using the included brac ket: ( 1 . Figure 1) Remov e the two scre ws closest to the rear panel of the SV1107IPEXT , on the base of the unit. ( 2 . Figure 2) Place the mounting brac ket on the base, aligning the circula[...]

Instruction Manual 14 Normal Logon T o operate the SV1107IPEXT from an Internet browser , begin by logging in. Open your browser and specify the IP address (assigned in the pre- liminary set up) of the SV1107IPEXT in the browser’ s Address bar . A Security Aler t dialog box, similar to the one below , appears. 1. Accept the cer tificate. If a se[...]

Instruction Manual 15 The SV1107IPEXT Main Screen appears: The Main Screen consists of Administration icons arranged horizontally across the top of the screen (see pg. 15), and Utility icons arranged verti- cally on the left side of the screen (described in table below). Utility Icons Apply: Sa ves the changes y ou make in the administr ation dialo[...]

Instruction Manual 16 Administration The icons arranged v er tically on the left side of the screen (shown left) are linked to the administration utilities , which are used to configure the SV1107IPEXT . Y our ability to make configuration changes depends on the permissions associated with your login inf ormation. Once you login, the Gener al pan[...]

Instruction Manual 17 Network The Network dialog is used to specify the SV1107IPEXT’ s network envi- ronment. Access P orts If a firew all is being used, the Administrator can specify (in the firew all set up) the por t numbers that it will allow . When connecting to the SV1107IPEXT , users must specify the por t number as par t of the IP Addre[...]

Instruction Manual 18 IP Address The SV1107IPEXT can hav e its IP address assigned dynamically at boot- up (DHCP), or can be given a fix ed IP address. Please note: If you wish to access the SV1107IPEXT from the Internet, assign a static IP address as you will need to configure y our router to forw ard the port to the SV1107IPEXT , and an IP addr[...]

Instruction Manual 19 the operability of the e-mail notification. An e-mail should be sent to the e-mail address specified in the T o: field Please Note: This will only notify you if the SV1107IPEXT changes its address on your local network, it will not notify y ou if your e xter nal ad- dress changes. Security The Security page is used to contr[...]

Instruction Manual 20 Filtering T o enable IP and/or MA C filter ing, place a checkmark in the IP Filter Enable and/or MA C Filter Enable checkbox. There is a maxim um of 100 filters allowed f or each option. If the • include b utton is check ed, all the addresses within the filter range are allow ed access to the SV1107IPEXT . Addresses no[...]

Instruction Manual 21 T o delete a filter , select it and click Remove . T o modify a filter , select it and click Edit . The Edit dialog bo x is similar to the Add dialog box. When it appears, simply delete the old address and replace it with the new one . User Station Filtering – MA C Addresses T o add a MA C address filter click Add . A dia[...]

Instruction Manual 22 Enter the follo wing command: openssl req -x509 -nodes -days 365 -ne wke y rsa: 1024 -keyout m ycer t.pem -out mycert.pem In order to use a custom SSL cer tificate, the created PEM file must then be uploaded through the web interf ace. Click on the Br owse b utton, and locate the generated certificate file, then click on t[...]

Instruction Manual 23 T o delete a user profile, select it from the names displa y ed in the User List panel, and click Remo ve . The user’ s name is remov ed from the User List panel. T o modify a user profile, first select it from the list in the upper panel, then change the information that appears in the User Info dialog bo x. The Re- set [...]

Instruction Manual 24 Please Note: If a user is denied a permission, that per mission will not be visible on the Utility tool bar , when that user logs on. Customization This configuration page allows the Administr ator to set Timeout , Login Failure , and W orking mode parameters. An e xplanation of the Customi- zation parameters is giv en in the[...]

Instruction Manual 25 Firmware As new v ersions of the SV1107IPEXT firmware become av ailable , they can be downloaded from our website . Check the website regularly to find the latest inf ormation and packages. T o upgrade the firmware, do the f ollowing: After downloading the ne w firmware file to your computer , open your 1. browser and log[...]

Instruction Manual 26 After the upload completes, clic k the 4. Apply icon at the left side of the web page. Enable the 5. Reset on Exit checkbox on the Customization page . Re-click the 6. Apply icon at the left of the w eb page. Click the 7. Logout icon at the upper right of the web page to exit and reset the SV1107IPEXT . Using the SV1107IPEXT S[...]

Instruction Manual 27 Open a web browser on the remote computer . 3. T ype in the IP Address you wrote do wn in step 6 of SV1107IPEXT 4. Initial configuration f or e xample http://192.168.1.60, then hit the enter key Y ou will be taken to the SV1107IPEXT Logon screen 5. Enter your user name and pass word in the spaces provided and click 6. on Logo[...]

Instruction Manual 28 When a connection to the SV1107IPEXT has been established, a 2. screen similar to the one shown here will appear: After you clic k on the Switch b utton, the remote system appears on your monitor . Y ou can work on the remote system via the screen display ed on y our monitor , as if it were y our local system. Y ou can move th[...]

Instruction Manual 29 Please Note: Due to network lag, there might be a delay bef ore your ke ystrokes • appear on the screen. Y ou may also hav e to wait a bit for the remote mouse to catch up to your local mouse bef ore y ou click. Due to net lag, or insufficient computing power on the local machine , • some images, especially motion i[...]

Instruction Manual 30 Icon Function Exit from the Windows Client F rom left to right, these icons indicate the current Num Lock , Caps Loc k and Scroll Lock state , respectively . When the corresponding icon is illuminated, the function is active . When connected, toggle the LEDs to set the correct state Please Note: Y ou can mov e the control pane[...]

Instruction Manual 31 T o customize a hotk ey combination: Highlight the Action, and then click 1. Start . K ey in the Function k eys (one at a time). The k ey names appear in the 2. Key field as you press them. When you ha ve finished k eying in your sequence, Clic k 3. Stop . Click 4. Set . Repeat for any other actions y ou wish to change. Clic[...]

Instruction Manual 32 Action Explanation Substitute Ctrl key If your local computer captures Ctrl ke y combinations, pre venting them from being sent to the remote system, you can implement their effects on the remote system by specifying a function k ey to substitute for the Ctrl k ey . If you substitute the F11 k ey , for e xample, pressing [ F11[...]

Instruction Manual 33 Option Usage Screen P osition Adjust the horizontal and vertical position of the remote computer window b y clicking the Arrow buttons . Auto-Sync Click A uto-Sync to detect the v er tical and horizontal offset values of the remote screen and automatically synchronize it with the local screen. If the local and remote mouse poi[...]

Instruction Manual 34 The Message Board The SV1107IPEXT suppor ts two user logins, (only one user has control at a given time), which can possib ly create access conflicts. T o alleviate this problem, a message board f eature has been provided, allo wing users to communicate with one other . Message board operation resembles that of an Internet ch[...]

Instruction Manual 35 By default, messages are posted to all users . T o post a message to an • individual user , select the user’ s name before sending y our message. If a user’ s name is selected, and y ou want to post a message to all • users, select All Users prior to sending a message. If a user has disabled Chat, an icon is sho [...]

Instruction Manual 36 Show / Hide (User List): When you hide the User List, the User List panel closes. The button is shado wed when the User List is open Exit: Click to close the message board Please Note: Only users who are currently logged on can see the Mes- sage Board - it is not visible on the local monitor . Virtual Media The SV1107IPEXT’ [...]

Instruction Manual 37 F rom the remote computer click on the Vir tual Media icon in the Windows Client Control P anel, this opens the Vir tual Media Connection dialog box: Please Note: More than one USB mass storage de vice ma y be connect- ed and recognized, b ut only the unit selected can be accessed. Drop down the Ph ysical De vice list to selec[...]

Instruction Manual 38 work, once your configuration has been pro ven, the Internet connection will be cov ered. T o connect from y our local network: Ensure the “remote” computer is connected to your network. 1. Ensure the SV1107IPEXT is connected to your local network and to 2. the local computer Star t the browser of your choice on the remot[...]

Instruction Manual 39 The Jav a Applet T oolbar The Ja va Applet’ s toolbar provides utilities to help y ou control remote KVM operations. Please Note: The tool bar is hidden in the blank area at the bottom cen- ter of the screen, and appears when you mo ve the mouse pointer o ver the area. The T ool Bar Icons and their functions are explained in[...]

Instruction Manual 40 Set Video Parameter s: Clicking on this b utton brings up the Video Settings dialog box: Please Note: W e recommend that you perf or m Auto sync immediately follo wing connection, to ensure proper mouse synchronization. Keypad Since some local input ke yboard combinations cannot be captured and sent to the SV1107IPEXT , the K [...]

Instruction Manual 41 Mouse Synchronization At times, the local mouse mov ement may lose sync with the remote mouse mov ement. Y ou can tr y getting them back in sync with fast mouse synchronization by mo ving the mouse pointer down into the J av a Applet toolbar . If that does not help, run A uto sync (as discussed on the pre vious page). If Auto [...]

Instruction Manual 42 When the front panel LEDs flash, disconnect the power adapter from 5. the SV1107IPEXT . Remov e the jumper cap from J9. 6. Close the housing and reconnect the SV1107IPEXT power adapter 7. and cables . After star ting back up , y ou can use the default Username and P ass 8. word to log in. Please Note: P erforming this procedu[...]

Instruction Manual 43 If you ha ve assigned a static IP address to the SV1107IPEXT , this step 1. can be skipped. The SV1107IPEXT features IP Change Notification, which will automatically send an e-mail to your pref erred address, notifying y ou of the new IP Address . Fill out the form (contact your ISP if you are unsure of the information). Afte[...]

Instruction Manual 44 If you are using A utomatic addressing, click on the drop down arrow labeled Computer Name and select the SV1107IPEXT by name . In the 6. P orts to Open [TCP] space, enter 9000 , 9002 (or the por t numbers you chose) and set the schedule . Activate P or t Forwarding b y placing an X in the box on the e xtreme left. Sav e your [...]

Instruction Manual 45 T roubleshooting General Operation SV1107IPEXT is acting erratically: Press and hold the Reset button f or at least three seconds My Virtual Media device is set to “read only” under Windows Vista™ and cannot be made writable: Due to Windows Vista™ security features, no data can be written to a Vir tual Media device . U[...]

Instruction Manual 46 When I log in, the bro wser generates a CA Root certificate is not trusted, or a Certificate Error response The cer tificate name is not found on Microsoft’ s list of T r usted Authorities. The cer tificate can be trusted. For mouse prob lems, see Ad ditional Mouse Synchr onization Proce- dures The Windows Client Windows[...]

Instruction Manual 47 Mouse Synchronization Procedures If the mouse synchronization procedures mentioned in the manual f ail to resolve mouse pointer prob lems f or par ticular computers, try the follow- ing: Note: These procedures are to be performed on the computers attached to 1. the SV1107IPEXT por ts (local) - not on the computer you are using[...]

Instruction Manual 48 Windows XP / Windows Server 2003 / Vista™ Set the mouse speed to the middle position, then disable Enhance P ointer Precision (Control P anel −> Pr inters and Other Hardware −> Mouse −> P ointer Options). Apply −> OK[...]

Instruction Manual 49 T echnical Support StarT ech.com’ s lifetime technical support is an integr al par t of our commit- ment to pro vide industry-leading solutions. If y ou e ver need help with your product, visit www .star tech.com/suppor t and access our comprehensive selection of online tools, documentation, and downloads . Warranty Informat[...]

StarT ech.com has been making “hard-to-find easy” since 1985, providing high quality solutions to a div erse IT and A/V customer base that spans man y channels, including gov ernment, education and industrial f acilities to name just a f ew . We off er an unmatched selection of computer parts, cab les, A/V products, KVM and Serv- er Management[...]