TANDBERG TT1282 Bedienungsanleitung

ST.RE.E10141.5 Issue 5 ENGLISH (UK) REFERENCE GUIDE TT1280 and TT1282 High Definition Professional Receiver/Decoder Software Version 2.0.0 (and later) TT1280 and TT12 82 HD Professional Rec eiver/Decoder[...]

Preliminary Pages Page ii Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 Issue 5 first published in 2005 by : T ANDBERG T ELEVISION L TD R EGISTERED A DDRESS : U NIT 2 S TRATEGIC P ARK , C OMINES W AY , H EDGE E ND , S OUTHAMPTON , H AMPSHIRE , SO30 4DA U NITED K INGDOM Re g istered Com p an y Number 0369553 [...]

Preliminary Pages Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page iii ST.RE.E10141.5 List of Contents Chapter 1: Introduction This chapter identifies the equ ipment versions covered by this manual; describes the purpose of the eq uipment in a typical system; provides a summary of its main features; identifies the contro[...]

Preliminary Pages Page iv Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 About This Reference Guide This Reference Guide pro vides instruction s and information for the installation and operation of the TT1280 and TT1282 1U digital integrated Receiver/Decode r (IRD). This Reference Guid e should be ke pt in a[...]

Preliminary Pages Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page v ST.RE.E10141.5 Warnings, Cautions and Notes. Heed Warnings All warnings on the product and in the operating instructions should b e adhered to. The manufacturer can not be held responsible for injuries or damage where warnings an d cautions have been ig[...]

Preliminary Pages Page vi Reference Guide: TT128x High Definition Professional Rece iver/Decoder ST.RE.E10141.5 Contact Information TANDBERG Television Customer Services Support Services Our primary object ive is to pro vide first cla ss customer care that is tailor ed to your specific business and op erational requiremen ts. All levels are support[...]

Preliminary Pages Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page vii ST.RE.E10141.5 Technical Training Training Courses TANDBERG Television pro vides a wide range of training courses on the operation and maintenance of our products an d on their supporting technologies. TANDBERG can provide b oth regularly scheduled co[...]

Preliminary Pages Page viii Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 BLANK[...]

Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 1-1 ST.RE.E10141.5 Chapter 1 1. 1 Introduction Contents 1.1 Scope of This Reference Guide ................................ 1-3 1.1.1 Who Should Use This Reference Guide ....... 1-3 1.1.2 What Equipment is Covered by This Reference Guide ....................................[...]

Introduction Page 1-2 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 BLANK[...]

Introduction Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 1-3 ST.RE.E10141.5 1.1 Scope of This Reference Guide 1.1.1 Who Should Use This Reference Guide This Reference Guide is written for operators/users of the TT1280 and TT1282 Integrated Receiver/Decoder (IRD). It describes the unit’s functions and operation. T[...]

Introduction Page 1-4 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 Model Number Marketing Code Description TT1282 Common Interface (-48 V version) TT1282/CIBAS/48V MPEG-2 HD Decoder with integrated Common Interface CAM reader, -48 Vdc voltage input. MPEG 4:2:0 and 4:2:2 video decode. TT1282 Director TT1282[...]

Introduction Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 1-5 ST.RE.E10141.5 • Data:  DTS audio detection and pass-through.  Low Speed Data: RS-232 asynchronous (up to 38.4 kbit/s).  High Speed Data: Ethernet Data-piping (up to 5 Mbit/s) (option).  High Speed Data: RS-422 synchronous (up to 2048 kbit/s[...]

Introduction Page 1-6 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 BPSK/QPSK/8PSK/16QAM (HOM) L-Band Inputs (Satellite Receivers) (Option) Four F-type connectors connect the L-band output of a suitable LNB either directly or via a suitable attenuator giving lightning and surge protection. DVB-S QPSK, DVB-S[...]

Introduction Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 1-7 ST.RE.E10141.5 There are five relays for failure monitoring (four alarms and one summary alarm). The operator can define (using the Alarm Menu pages) which alarm conditions drive the relays. This is described in Chapter 5, Alarms and Annex C, Menus . 1.3 [...]

Introduction Page 1-8 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 1.3.3 What the Satellite Receiver Does The Receiver can be tuned to a specified satellite channel frequency and polarisation. The input is down-converted via a Low-Noise Block (LNB) to provide an L-band input to the Receiver. The front-end [...]

Introduction Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 1-9 ST.RE.E10141.5 1.4 The Telco Receiver/Decoder 1.4.1 Typical Decoder System The Decoder is a component of TANDBERG Television’s range of equipment. It is designed for use by broadcasters and distributors of video and audio Services. It can be used as a T[...]

Introduction Page 1-10 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 1.4.2 What the Decoder Does The ASI interface is used to present the Transport Stream in the format required by the internal Decoder circuitry. At this point, the operation of the unit is the same as the Satellite Receiver. The Decoder can [...]

Introduction Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 1-11 ST.RE.E10141.5 1.5.2 Front Panel (Local) Modes Operating the IRD from the Front Panel is via two main operating modes: Navigate and Edit . See Section 3.3, Front Panel Operating Modes . Figure 1.6: Front Panel States 1.6 Guided Tour 1.6.1 Construction The[...]

Introduction Page 1-12 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 Figure 1.7: Front Panel Controls 1.6.3 Front Panel LEDs Figure 1.7 shows the location of the LEDs on the front panel. The LEDs indicate the equipment status as follows: The red ALARM LED is used to indicate an IRD fault condition, e.g. a mi[...]

Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 2-1 ST.RE.E10141.5 Chapter 2 2. Installing the Equipment Contents 2.1 Read This First! ......................................................... 2-3 2.1.1 Handling ....................................................... 2-3 2.1.2 Installing the Equipment ..................[...]

Installing the Equipment Page 2-2 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 Table 2.9: Alarm Connector......................................................... 2-15 Table 2.10: RS-232 Low-speed/RS-422 High-speed Data Connector ................................................................... 2-15[...]

Installing the Equipment Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 2-3 ST.RE.E10141.5 2.1 Read This First! 2.1.1 Handling The IRD must be handled and installed carefully and thoughtfully to prevent safety hazards and damage. 2.1.2 Installing the Equipment Ensure the personnel designated to fit the unit have the ap[...]

Installing the Equipment Page 2-4 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 2.2 Preliminary Checks 2.2.1 Mechanical Inspection WARNING… REMOVING THE COVERS OF THIS EQUIPMEN T MAY INVALIDATE ANY WARRANTIES, CAUSE A SAFETY HAZARD OR/AND AFFECT THE EMC PERFORMANCE. CHECK WITH TANDBERG TELEVISION CUSTOMER[...]

Installing the Equipment Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 2-5 ST.RE.E10141.5 2.3 Installing the Equipment 2.3.1 Fixing The IRD is designed for fixed use only and has been shipped with fixing brackets suitable for a standard 19-inch rack. When installed in a rack, it should be secured using the fixing bra[...]

Installing the Equipment Page 2-6 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 Protection from Moisture Do not install this equipment in areas of high humidity or where there is a danger of water ingress. 2.3.3 Installing Cables - Safety Power supply cables should be routed so that they are not likely to b[...]

Installing the Equipment Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 2-7 ST.RE.E10141.5 WARNINGS… 1. THE TT1280 AND TT1282 SHOULD ONLY BE OPERATED FROM THE TYPE OF POWER SOURCE INDICATED ON THE MARKING LABEL. IF YOU ARE NOT SURE OF THE TYPE TO YOUR BUSINESS, CONSULT YOUR APPLIANCE DEALER OR LOCAL POWER COMPANY. D[...]

Installing the Equipment Page 2-8 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 Table 2.2: Non Standard Supply Cord Wire Colours Wire Colour (UK) Action green-and-yellow ...must be connected to the terminal in the plug which is mark ed with the letter E or the safety earth symbol or coloured green or green-[...]

Installing the Equipment Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 2-9 ST.RE.E10141.5 2.6.3 Connecting the Equipment to the DC Power Supply Connect the Receiver to the local d.c. power supply as follows. 1. Local DC Power Supply Ensure the power supply is isolated and switched off. 2. Receiver Ensure the correct [...]

Installing the Equipment Page 2-10 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 2.8 Signal Connections 2.8.1 General CAUTION... It is strongly recommended that the terminal marked at the rear panel of the equipment is connected to a site Technical Earth before any external c onnections are made and the equi[...]

Installing the Equipment Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 2-11 ST.RE.E10141.5 Figure 2.5: Signal Connections ASI/SSI FRAME SYNC ASI/SSI In Frame Synchronisation ASI Transport Streams ASI Transport Streams Analogue/Digital Audio Output Analogue/Digital Audio Output Analogue Video Output Digital Video Outpu[...]

Installing the Equipment Page 2-12 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 2.8.2 ASI Out Two BNC sockets output ASI Transport Streams with a maximum data rate of 160 Mbit/s. NOTE… These sockets are shared with the HD SDI output, under the control of Menu 5.1 Table 2.3: ASI Out Connector Item Specific[...]

Installing the Equipment Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 2-13 ST.RE.E10141.5 2.8.4 SVGA Output (RGB HV) The IRD is equipped with a SVGA 15-pin D-type connector for video output in the standard configuration. The SVGA connector shall be set to RGB/HV (SVGA) or YPrPb under control of the user interface and[...]

Installing the Equipment Page 2-14 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 NOTE… These connectors are shared with the ASI output, under the control of menu 5.1. 2.8.6 Frame Synchronisation A BNC socket is used by the Decoder to frame lock to an external video source (NTSC, PAL or SECAM). The frame in[...]

Installing the Equipment Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 2-15 ST.RE.E10141.5 2.8.8 Alarm Connector and Relay The alarm relay connector has a summary and four general purpose relays. The summary relay is activated whenever the unit detects an alarm, or the power is switched off. Table 2.9: Alarm Connector[...]

Installing the Equipment Page 2-16 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 2.9 Option Card Connectors Option cards are described in Chapter 6, Options .[...]

Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 3-1 ST.RE.E10141.5 Chapter 3 3. Operating the Equipment Locally Contents 3.1 Powering the Equipment ........................................... 3-3 3.1.1 Switching On ................................................ 3-3 3.1.2 Power-up Operating Modes.......................[...]

Operating the Equipment Locally Page 3-2 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 List of Tables Table 3.1: Navigate Mode ............................................................. 3-4 Table 3.2: Edit Mode ..................................................................... 3-5 Table 3.3: Selecting[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-3 ST.RE.E10141.5 3.1 Powering the Equipment 3.1.1 Switching On CAUTION... This equipment should not be operated unless the coo ling fan is working and there is free-air flow around the unit. Connect the signal inputs and ac power supply t[...]

Operating the Equipment Locally Page 3-4 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 3.2 Front Panel Controls and Pushbuttons Front Panel items are described under Section 1.6, Guided Tour . Figure 3.2: Front Panel Controls and Pushbuttons 3.3 Front Panel Operating Modes 3.3.1 General Operating the IRD fr[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-5 ST.RE.E10141.5 The Front Panel returns to Navigate mode when Edit is pressed again (abort edit with no save) or when Save is pressed (save modified parameter values). Processing of events from the front panel event queue depends on the [...]

Operating the Equipment Locally Page 3-6 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 3.4 Using the Local Controls 3.4.1 LCD Menu Descriptions Detailed LCD menu descriptions are given in Annex C, Menus . This chapter concentrates on describing the use of the menus for local operation. 3.4.2 Selecting a Men[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-7 ST.RE.E10141.5 3.5 Setting Up Preset Services (Menu 1) 3.5.1 Using Preset Services This group allows up to 40 Services to be stored as presets. Selecting a Service from the preset list in Menu 1 automatically reconfigures the IRD to rec[...]

Operating the Equipment Locally Page 3-8 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 Step Action Result 7 Scroll to Menu 2.3.2.5. Enter the LNB 22 kHz setting then press Save . Enables or disables the LNB 22 kHz control tone for the selected Source (On, Off). 8 Scroll to Menu 2.3.2.6. Enter the SEARCH RAN[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-9 ST.RE.E10141.5 3.6.3 DVB-S2 Satellite Receiver (TT1280/HWO/DVBS2 and TT1280/HWO/DVBS2/IF/CONST) Table 3.8: Setting Up the DVB-S2 Satellite Receiver Step Action Result 1 Go to Menu 2.3 and select SOURCE 1. The Receiver can take its signa[...]

Operating the Equipment Locally Page 3-10 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 3.6.4 Telco Receiver - TTV G.703 Table 3.9 steps through the set up procedure of the Telco Receiver using Menu 2 Input, and the TTV G.703 input. Table 3.9: Setting Up the TTV G.703 Interface Step Action Result 1 Connect t[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-11 ST.RE.E10141.5 Step Action Result 7 Navigate to IP INPUT MULTICAST IP ADD (Menu 2.3.2.4), then press Edit . Select the Multicast IP address, then pres s Save . Edits the IP Input Multicast IP address parameter. 8 Return to Input Menu 2[...]

Operating the Equipment Locally Page 3-12 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 3.7.3 Selecting the Audio Component Introduction Automatic audio component selection is based on component order in the PMT as follows: • Audio 1 selects the first component in the PMT and Audio 2 selects the second com[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-13 ST.RE.E10141.5 3.7.4 Setting Up Asynchronous Data (RS-232) These menu pages allow status monitoring and configuration of the low speed data. Table 3.14: Setting Up Async Data Step Action Result 1 Go to Menu 3.5 and press Edit . Select [...]

Operating the Equipment Locally Page 3-14 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 3.7.7 Setting Up Closed Captions Table 3.17: Setting Up Closed Captions Step Action Result 1 Scroll to Menu 3.8.2 and edit the parameter for enabling Closed Captions pass through (ENABLED or DISABLED). Press Save . Edits [...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-15 ST.RE.E10141.5 BISS (as specified in EBU Tech 3292 May 2002) is standard on all units. It is not possible to have both DVB Common Interface and TANDBERG Director options fitted on the same unit. 3.8.2 Basic Interoperable Scrambling Sys[...]

Operating the Equipment Locally Page 3-16 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 3.9 Setting Up the Transport Stream Output (Menu 5) 3.9.1 Set-up Procedure Use Table 3.21 to step through the Transport Stream Output set-up procedure using Menu 5. This allows the Transport Stream for the current Service[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-17 ST.RE.E10141.5 3.9.4 Transport Stream Packet Lengths The input transport stream packet lengths may be 188/204/208 bytes. With the transport stream output set to POST INPUT or POST TS DESCRAMBLE, the output packet length is the same as [...]

Operating the Equipment Locally Page 3-18 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 3.11 Setting Up System Parameters (Menu 7) This menu gives access to the Setup Menu to set up and edit System Parameters as well as the IRD Details menu (see Table 3.26 ). Table 3.25: Setting Up a System Step Action Resul[...]

Operating the Equipment Locally Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 3-19 ST.RE.E10141.5 3.12 Restarting the Unit The System Restart submenu allows the user to reboot the unit without having to remove and insert the power cable. Table 3.27: System Restart Menu Step Action Result 1 Go to Menu 7.3. Accesses th[...]

Operating the Equipment Locally Page 3-20 Reference Guide: TT128x High Definition Profess ional Receiver/ Decoder ST.RE.E10141.5 BLANK[...]

Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 4-1 ST.RE.E10141.5 Chapter 4 4. Operating the Equipment Remotely Contents 4.1 Remote Control ......................................................... 4-3 4.1.1 Introduction ................................................... 4-3 4.1.2 Remote Protocol Control Documentation [...]

Operating the Equipment Remotely Page 4-2 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 BLANK[...]

Operating the Equipment Remotely Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 4-3 ST.RE.E10141.5 4.1 Remote Control 4.1.1 Introduction The IRD can be remotely controlled in a variety of ways. The basic control methods are: • TANDBERG Device Controller (TDC) • Third-party application using TANDBERG SNMP MIB protoco[...]

Operating the Equipment Remotely Page 4-4 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 Table 4.2: Conf igur ing the Ser ial Remote Port and A ctivating Remot e Prot ocol Step Action Result 1. Go to men u 7.1. Displays ‘OPERATING MODE’. 2. Press Edit . Displays ‘FRONT PANEL’. 3. Press the down pushbu[...]

Operating the Equipment Remotely Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 4-5 ST.RE.E10141.5 Entering the OAC Lockout PIN Table 4.4: Ente ring the OAC Lockout PIN Step Action Result 1. Go to men u # 4.3.6 DIRECTOR. Displays ‘NCP LOCK OVERRIDE PIN’. 2. Press Edit. Displays ‘ENTER CURRENT PIN’. 3. Enter the [...]

Operating the Equipment Remotely Page 4-6 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 BLANK[...]

Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 5-1 ST.RE.E10141.5 Chapter 5 5. Alarms Contents 5.1 Introduction ............................................................... 5-3 5.2 Location of the Alarm and Lock LEDs ....................... 5-3 5.3 ALARM LED ..........................................................[...]

Alarms Page 5-2 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 BLANK[...]

Alarms Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page 5-3 ST.RE.E10141.5 5.1 Introduction There are two Front Panel LEDs that indicate the status of the IRD. These are used to indicate abnormal performance of the unit. 5.2 Location of the Alarm and Lock LEDs The red ALARM LED is used to indicate an equipment fault con[...]

Alarms Page 5-4 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 It is possible to signal additional alarms depending on the Transport Stream input type and optional functionality in the unit. Satellite inputs: • Bit Error Rate (BER) above (programmable) threshold. • Modulation Error Ratio (MER) above (pro[...]

Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 6-1 ST.RE.E10141.5 Chapter 6 6. Options Contents 6.1 Hardware Enabled Options ....................................... 6-3 6.2 QPSK Input Card (TT1280/HWO/QPSK) .................. 6-3 6.2.1 General ......................................................... 6-3 6.2.2 Connector[...]

Options Page 6-2 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 BLANK[...]

Options Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 6-3 ST.RE.E10141.5 6.1 Hardware Enabled Options These options require extra har dware to be fitted to the unit. Contact the Customer Services Helpde sk for details (see Prelimin ary Pages ). 6.2 QPSK Input Card (TT1280/HWO/QPSK) 6.2.1 General The QPSK Input Card sup[...]

Options Page 6-4 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 CAUTION… 1. The Receiver provides dc power (refer to Chapter 3, Operating the Equipment Locally ) via the active L-band input connector to drive an LNB (Low No ise Block Down-Converter). Do not connect equipment other than an LNB to this connec[...]

Options Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 6-5 ST.RE.E10141.5 6.4 DVB-S2 Input Cards (TT1280/HWO/DVBS2 and TT1280/HWO/DVBS2/IF/CONST) 6.4.1 General The DVB-S2 Input card su pports DVB-S, QPSK demodulation and DVB-S2, QPSK and 8PSK de modulation. Two options are avail able. TT1280/HWO/DVB- S2 offers four L-ba[...]

Options Page 6-6 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 The specification for this connector is given in Annex B, Technical Specification . Table 6.4: DVB-S2 S atellite Receiver (IF Mo nitor Input) Connector Input Specification Connector Type BNC, Female Connector designatio n IF Pin: Centre Shield IF[...]

Options Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page 6-7 ST.RE.E10141.5 6.6 IP Input Card (TT1280/HWO/IP) The IP Input card provide s a 10/100BaseT Ethernet port, on which a transport stream can be receive d in UDP packets at up to 50 Mb it/s. The mapping of MPEG-2 TS pa ckets into IP data frames is done accordin g to[...]

Options Page 6-8 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 6.7 Software Enabled Options These options may be enabled through software licence keys. Contact the Customer Services Helpde sk for details (see Prelimin ary Pages ). 6.8 High Speed Data Over Ethernet (TT1280/SWO/HSETHER) The IRD can be enabled [...]

Reference Guide: TT128x High Definition Profess ional Receiver/De coder Page 7-1 ST.RE.E10141.5 Chapter 7 7. Preventive Maintenance and Fault- finding Contents 7.1 Routine Checks ......................................................... 7-3 7.1.1 Cooling Fan .................................................. 7-3 7.1.2 Cleaning .....................[...]

Preventive Maintenance and Fault-finding Page 7-2 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 BLANK[...]

Preventive Maintenance and Fault-finding Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 7-3 ST.RE.E10141.5 7.1 Routine Checks 7.1.1 Cooling Fan There are no routine checks associated with this equipment other than to ensure that the unit is adequately cooled. This equipment must never be operated unless the cooling fa[...]

Preventive Maintenance and Fault-finding Page 7-4 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 4. If the product does not operate normally by following the operating instructions. Adjust only those controls that are covered by the operating instructions, as an improper adjustment of other controls may resu[...]

Preventive Maintenance and Fault-finding Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 7-5 ST.RE.E10141.5 For systems support you can choose either Gold or Silver Advantage . These packages are designed to save you costs and protect your income through enlisting the help of TANDBERG Television support specialists. VO[...]

Preventive Maintenance and Fault-finding Page 7-6 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 7.5 Changing the Equipment Fuse 7.5.1 AC User Accessible Fuse Replacement CAUTION... This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the t[...]

Preventive Maintenance and Fault-finding Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page 7-7 ST.RE.E10141.5 Figure 7.2: Fuse Carrier If the replacement fuse also blows, do not continue. Disconnect the equipment and contact TANDBERG Customer Services (see Preliminary Pages ) for advice. 7.5.2 DC User Accessible Fuse Rep[...]

Preventive Maintenance and Fault-finding Page 7-8 Reference Guide : TT128x High Definition Profes sional Receiver/ Decoder ST.RE.E10141.5 7.6 Disposal 7.6.1 Moulded Plugs If the moulded plug fitted to the mains cable supplied with this equipment is not required, use another cable. If the supplied plug is to be changed, cut it off and dispose of it [...]

Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page A-1 ST.RE.E10141.5 Annex A A. Glossary The following list covers most of the abb reviations, acronyms an d terms as used in TANDBERG Television Limited Manuals, User and Referen ce Guides. All terms may not be included in this Referen ce Guide. µ m Micrometre (former name[...]

Glossary Page A-2 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 B3ZS Bipolar with Three Zero Substitution: A meth od of eliminati ng long zer o strings in a trans mission. It is use d to ensure a suffic ient number of tr ansitions to maintain sy stem synchronisat ion when the us er data stream c ontains an i[...]

Glossary Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page A-3 ST.RE.E10141.5 COFDM Coded OFDM: COFDM adds forwa rd error correction to the OFDM transmis sion consisting of Reed-Solomon (RS) coding followed by convolution al coding to add e xtra bits to the tra nsmitted signal. This allows a larg e number of errors at the [...]

Glossary Page A-4 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 DVB SI Digital Video Broadcasting Service Inform ation. DVB-PI DVB-Professional Interfaces: TTV Lan searc h shows – DVB Physical I nterfaces Earth Technical Earth: Ensures that all equip ment chassis withi n a rack are at t he same potenti al,[...]

Glossary Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page A-5 ST.RE.E10141.5 Hub A devic e in a multipoi nt network at which br anch nodes int erconnect. ICAM Integrated Conditional Access Module: E mbedded in the IRD a nd responsible for descramblin g, plus pack et filtering and rece ption. It also c ontains the p hysica[...]

Glossary Page A-6 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 LNB Low Noise Block Down-Converter: The comp onent of a subs criber sate llite transmissi on receiving dis h which amplifies the inc oming signal and d own-converts it to a suitable frequenc y to input to the IRD (ty pically 950 MHz - 1600 MHz).[...]

Glossary Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page A-7 ST.RE.E10141.5 NIT Network Information Table: Part o f the service infor mation data. Th e NIT provides inf ormation about the physical organisation of each transport s tream multiplex, an d the characteris tics of the network itself (such as th e actual freque[...]

Glossary Page A-8 Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder ST.RE.E10141.5 P-picture/P-frame A picture / frame p roduced using f orward prediction. It cont ains predic tions from either previous I frames or previous P frames. The P frame is us ed as a reference for future P or B fr ames. ppm Parts per million. PPV Pay [...]

Glossary Reference Guide: TT128x High Definition Professional Rece iver/Decoder Page A-9 ST.RE.E10141.5 STB Set-Top Box: A box that sits on top of a televis ion set and is the interface betwee n the home telev ision and the cable TV company . New technologi es evolving for s et-top boxes are v ideo-on-deman d, video games, ed ucational services, da[...]

Glossary Page A-10 Reference Guide: TT128x High Definition Professional Rece iver/Decoder ST.RE.E10141.5 Transport Stream A set of packetised elem entary data streams and SI streams , which may c omprise more than on e programme, but with common synchronis ation and er ror protection. The data structure is d efined in ISO/IEC 13818-1 [1] and is the[...]

Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decoder Page B-1 ST.RE.E10141.5 Annex B B. T echnical Specification Contents B.1 Output ...................................................................... B-3 B.1.1 Supported Video Resolutions ....................... B-3 B.1.2 Supported Video Bit-rates ............................ [...]

Technical Specification Page B-2 Reference Guide: TT128x High Definiti on Professional Recei ver/Decoder ST.RE.E10141.5 Table B.3: Analogue Audio Performance Specifications ............... B-6 Table B.4: Supported Audio Specifications ................................... B-6 Table B.5: Supported Audio Data Bit-rates (MPEG-2) .................. B-7 T[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-3 ST.RE.E10141.5 B.1 Output B.1.1 Supported Video Resolutions The IRD supports 4:2:0 MP@HL and 4:2:2 P@ML (TT1282 only) with video resolutions described in Table B.1 . Table B.1: Supported Video Resolutions Input Resolutions (H x V) Frame Rates O[...]

Technical Specification Page B-4 Reference Guide: TT128x High Definiti on Professional Recei ver/Decoder ST.RE.E10141.5 B.1.4 HD SDI HD SDI output supports: • Embedded Decoded Audios • Closed Captioning (EIA 708B) • VITC B.2 Audio Decoding and Output Stage B.2.1 General The IRD is capable of simultaneously decoding two PES streams of audio fr[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-5 ST.RE.E10141.5 It is possible to output the compressed Dolby Digital stream from the digital audio output, allowing it to be decoded to 5.1 channels by an external Decoder. Sampling rates (kHz): 32, 44.1, 48 Maximum compressed data rate: 640 kb[...]

Technical Specification Page B-6 Reference Guide: TT128x High Definiti on Professional Recei ver/Decoder ST.RE.E10141.5 Table B.3: Analogue Audio Pe rformance Specifications Parameter Conditions Limit Gain 0 dBm input level ± 1 dB Frequency response 100 Hz - 15 kHz, 0 dBm input level ± 0.2 dB 20 Hz - 20 kHz, 0 dBm input level +0.5 dB, -1 dB Cross[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-7 ST.RE.E10141.5 B.3.6 Supported Audio Bit-rates Table B.5: Supported Audio Data Bit-rates (MPEG-2) Mono kbit/s Stereo kbit/s Mono kbit/s Stereo kbit/s 32 64 96 192 48 96 112 224 56 112 128 256 64 128 160 320 80 160 192 384 B.3.7 Digital Audio Ou[...]

Technical Specification Page B-8 Reference Guide: TT128x High Definiti on Professional Recei ver/Decoder ST.RE.E10141.5 Parameter Specification Modulation Signal type QPSK per EN 300 421 3 Convolutional FEC rates 1/2, 2/3, 3/4, 5/6, 7/8 Symbol rate range Rs = 1.0 to 45.0 MSymbol/s Symbol rate step 1 Symbol/s Symbol rate lock range ± 120 ppm Bit-ra[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-9 ST.RE.E10141.5 Table B.8: QPSK Bit-rate R188 Limits (Mbit/s) FEC R188min R188max 1/2 1.000000 41.470588 2/3 1.228758 55.294118 3/4 1.382353 62.205882 5/6 1.535948 69.117647 7/8 1.612745 72.573529 LNB Power and Control The IRD provides LNB power[...]

Technical Specification Page B-10 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 B.4.2 HOM Satellite Receivers General Table B.10: HOM Satellite Receiver Input Specification Parameter Specification L-band input Safety status SELV Number of inputs 4 Input connector type F-type, female 75 Ω Input impedance 7[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-11 ST.RE.E10141.5 Table B.11: L-band Satellite Input — Eb/No Ratio Convolutional FEC Rate Eb/No Ratio (dB) in IF Loop for correct MPEG-2 system operation 1/2 QPSK 4.5 2/3 QPSK 5.0 3/4 QPSK 5.5 5/6 QPSK 6.0 7/8 QPSK 6.4 2/3 8PSK 6.9 5/6 8PSK 8.9[...]

Technical Specification Page B-12 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 B.4.3 DVB-S2 Satellite Receivers General Table B.13: DVB-S2 Satellite Receiver Input Specification Parameter Specification L-band input Safety status SELV Number of inputs 4 (TT1280/HWO/DVBS2) 3 (TT1280/HWO/DVBS2/IF/CONST) Input[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-13 ST.RE.E10141.5 Parameter Specification QPSK LDPC FEC rates 1/2, 3/5, 2/3, 3/4, 4/5, 5/6, 8/9. 9/10 8PSK, LDPC FEC rates 3/5, 2/3, 3/4, 5/6, 8/9, 9/10 LDPC FEC Frame length Normal Pilot tones Automatic detection Symbol rate range Rs = 5 to 31 M[...]

Technical Specification Page B-14 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 Eb/No ratio is referred to user bit-rate Ru188. See EN 300 421 specification. For more detailed specification information and advice on performance in specific applications, please contact TANDBERG Television Customer Services. [...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-15 ST.RE.E10141.5 Table B.16: LNB Power and Control Parameter Specification Voltage V (nominal) Receiver Polarisation 14 Voltage 13 18 Vertical/circular right Horizontal/circular left Current 350 mA maximum LNB control 22 ± 2 kHz tone Tone ampli[...]

Technical Specification Page B-16 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 Input Specification Safety status SELV Connector type 8 way RJ-45 Connector Designation 10/100 BT Signal Type 10/100BaseT Ethernet (IEEE 802.3/802.3u) Data Rate 1.5 – 50 Mbit/s B.4.7 SSI Input (SMPTE 310M) Table B.20: SSI Inpu[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-17 ST.RE.E10141.5 Connector type 15-way D-type Connector designation Vi deo Out Video standards 1080 interlaced Video level (luminance) 700 mV ± 30 mV[...]

Technical Specification Page B-18 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 Digital Video Table B.23: Digital Video Output Connectors Item Specification Safety status SEL V Connector type BNC, Female, 75 Ω Connector des ignation HD SD I 1 HD SDI 2 Output standard (USA) ANSI/SMPTE 292M SDI output level[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-19 ST.RE.E10141.5 Table B.26: RS-422 Synchronous (High-speed) Data Connector Item Specification Safety status SELV Connector type 9-Way D-ty pe Connector designation RS232/RS422 DATA OUT Data-rates (bit/s) Integer multiples of 56 kbit/s and 64 kb[...]

Technical Specification Page B-20 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 Item Specification Maximum Switching Voltage 50 Vdc / 30 Vac Maximum Switching Power 24 W / 60 VA Minimum Switching Load 0.1 mA, 100 mVdc B.6 Environmental B.6.1 Conditions Table B.30: Environmental Conditions Operational Specif[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-21 ST.RE.E10141.5 B.7 Power Supply B.7.1 AC Mains Input This equipment is fitted with a wide-ranging power supply. It is suitable for supply voltages of 100-120 Vac -10% +6% or 220-240 Vac -10% +6% at 50/60 Hz nominal. Table B.32: AC Power Supply[...]

Technical Specification Page B-22 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 B.7.2 DC Supply Input (-48 V Version) NOTES... 1. Only models TT1280/CIBAS/48V, TT1280/DIRBAS/48V, TT1282/CIBAS/48V and TT1282/DIRBAS/48V use a DC power supply. 2. Ensure correct polarity is maintained. 3. The unit must have a p[...]

Technical Specification Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Decode r Page B-23 ST.RE.E10141.5 B.9 Compliance 15 B.9.1 Safety This equipment has been designed and tested to meet the requirements of the following: EN 60950 European Safety of information technology equipment. IEC 60950 International Safety of information te[...]

Technical Specification Page B-24 Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder ST.RE.E10141.5 B.9.3 CE Marking The CE mark is affixed to indicate compliance with the following directives: 89/336/EEC of 3 May 1989 on the approximation of the laws of the Member States relating to electromagnetic compatibility. 73/23/EEC of[...]

Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-1 ST.RE.E10141.5 Annex C C. Menus Contents C.1 LCD Menus ...............................................................C-3 C.1.1 Using the Menus ...........................................C-3 C.1.2 Menu Descriptions ........................................ C-3 C.2 Menu [...]

Menus Page C-2 Referenc e Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 Table C.21: Output Connector S elector Submenu ...................... C-14 Table C.22: Alarms Menu ............................................................ C-15 Table C.23: Transport Strea m Alarm Setup Menu ...................... C-15 Table C.[...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-3 ST.RE.E10141.5 C.1 LCD Menus C.1.1 Using the Menus Detailed description of the u se of menus is given in Chapter 3, Operating the Equipment Locally . C.1.2 Menu Descripti ons This annex describes the front panel LCD menus. When the unit is first powered up, it pr[...]

Menus Page C-4 Referenc e Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.3 The Menu Structure Section C.9 Section C.6 Section C.8 Section C.4 Section C.5 6. Alarms 4. Conditional Menu 5. TS Output 5.1 Connector 1/2 7. S y stem 2. Input (QPSK, HOM , G.703 o r IP) 1. Preset s TT1280 SWITCH O N Boot Scr een 1 Preset Menu[...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-5 ST.RE.E10141.5 C.4 Presets Menu Items (Menu 1) The Presets menu contains up to 40 editab le prese t numbers in the range 01 – 40. Selecting a Service via the Presets men u automatically reconfigures the inp ut of the IRD. Each preset can have a selected languag[...]

Menus Page C-6 Referenc e Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.5.3 SSI Menu When the SSI (SMPT E 310) sou rce is selec ted this menu all ows the user to monitor the signal lo ck status. Table C.5: Input Selectio n Menu Display Title: SMPTE 310 Description WWWWWWWWWW Displays the signal lock st atus (LOCKED, [...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-7 ST.RE.E10141.5 C.5.5 HOM Satellite Option Menu When a Higher Order Modulation Input interfa ce is used, the Input menu allows the user to edit the HOM parameters. Table C.7: HOM Satellit e Menu Display Title: Input Description Quality PV BER -1 -3 -5 XX.LX E-8 XX[...]

Menus Page C-8 Referenc e Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.5.6 TTV G.703 (DS3 and E3) Option Menu When a TTV G.703 input interface is used, the Input menu allows the user to edit the set-up par ameters Table C.8: TTV G.703 Me nu Display Title: Input Description STATUS PDH Rate XXXXX XXXXX is the framing [...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-9 ST.RE.E10141.5 C.6 Service Menu (Menu 3) C.6.1 Overview The Service menu allows access to the currently availabl e services. This group provides a sum mary of the data streams as sociated with the decoded service. In the case of multiple streams of the sa me comp[...]

Menus Page C-10 Reference Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 Display Title: Video Description GOP Structure Y…..Y Pixel Aspect Ratio YYY Y…..Y video GOP structure and length YYY is the current video aspect ratio (16:9) Rate Buffer Level XXX% Bit-rate YY.YY Mbit/s XXX is the current video rate bu ffer lev[...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-11 ST.RE.E10141.5 C.6.3 Audio 1 Menu The Audio 1 signal status submenu contains information about the audio format and status of the currently decod ed audio stre am on the primary audio output. Table C.12: Au dio 1 Menu Display Title: Audio 01 Descripti on XX Stre[...]

Menus Page C-12 Reference Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.6.5 Async Data Menu The Async Data submenu allows statu s moni toring and configuration of the low speed data. Table C.14: Async D ata M enu Display Title: Async Data Description WW Streams PID XXXX YYYYYYYYYYY WW is the number of Low speed dat a[...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-13 ST.RE.E10141.5 C.6.8 VBI Menu The VBI status submenu displays the current status of the VBI components. NOTE… The VITC menu functionality is not supported in software version 1.0.0. Table C.17: VBI Menu Display Title: VBI Description Closed Captions XXXXXXXXXX[...]

Menus Page C-14 Reference Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.7 Transport Stream Output Menu C.7.1 Overview The Transport Stream Outpu t submenu allows editing o f the position of the ASI output. Table C.20: Trans p ort Stream Output Menu Display Title: Transport Stream Output Description XXXXXXXXXXX Positi[...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-15 ST.RE.E10141.5 C.8 Alarms Menu (Menu 6) C.8.1 Overview The Alarms menu provides a summary of the alarm status. Table C.22: Al arms M enu Display Title: Alarms Description Section Transport Stream Alarm S etup Transport Stream alar m and relay se ttings. C.8.2 Vi[...]

Menus Page C-16 Reference Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.8.3 Video Alarm Setup Menu Table C.24: Vi deo Alarm Set up M enu Display Title: Description IF VIDEO NOT RUNNING YYYYYYYYYYYYYY YYYYYYYYYYYYYY is editable: NO ALARM SET ALARM ONLY SET ALARM AND RELAY 1 SET ALARM AND RELAY 2 SET ALARM AND RELAY 3 [...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-17 ST.RE.E10141.5 C.8.5 Audio 2 Alarm Setup Menu Table C.26: Au di o 2 Alarm Setup M enu Display Title: Description IF AUDIO 02 NOT RUNNING YYYYYYYYYYYYYY YYYYYYYYYYYYYY is editable: NO ALARM SET ALARM ONLY SET ALARM AND RELAY 1 SET ALARM AND RELAY 2 SET ALARM AND [...]

Menus Page C-18 Reference Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.8.7 MER Alarm Setup Menu Table C.28: MER Al arm Setup Menu Display Title: Description IF MER LESS THAN XX.X YYYYYYYYYYYYYY YYYYYYYYYYYYYY is editable 0 to 69.9: NO ALARM SET ALARM ONLY SET ALARM AND RELAY 1 SET ALARM AND RELAY 2 SET ALARM AND REL[...]

Menus Reference Guide: TT128x Hi gh Definition Professional Rece iver/Decoder Page C-19 ST.RE.E10141.5 C.9 System Menu (Menu 7) C.9.1 Setup Menu The Setup submenu allows the user to edit the operating mode, LCD contrast, serial remote pro tocol, IP address, subnet mask, service hunt mode, and the customisation key. Table C.30: Se tup M enu Display [...]

Menus Page C-20 Reference Guide: TT128x High Definition Professi onal Receiver/Decoder ST.RE.E10141.5 C.9.2 IRD Details Menu The IRD Details submenu displays the software, firmware, hardware, PLD version and electronic serial nu mber of the IRD. Table C.31: IRD Det ails Menu Display Title: IRD Details Description Electronic Serial N umber XXXXX XXX[...]

Reference Guide: TT128x Hi gh Definition Professi onal Receiver/Dec oder Page D-1 ST.RE.E10141.5 Annex D D. Language Abbreviations Languages are shown in alphabetical order. NO LANGUAGE ABBREVIATION 5 ARABIC ARA BASA BAS 14 BENGALI BEN 135 CHINESE CHI 19 CZECH CZE 21 DANISH DAN 82 DUTCH DUT 25 ENGLISH ENG 31 FINNISH FIN 34 FRENCH FRE 22 GERMAN GER [...]

Language Abbreviations Page D-2 Reference Guide: TT128x High De finition Professional Receiver/Decoder ST.RE.E10141.5 The following non-ISO 1 languages are supported. NOTE… Only applicable for a transport stream going to an Alteia Receiver. LANGUAGE ABBREVIATION MAIN ONE AUX TWO INTERNATIONAL SOUND INT AUDIO 1 AAA AUDIO 2 AAB AUDIO 3 AAC AUDIO 4 [...]

Reference Guide: TT1280 Hi gh Definition Professi onal Receiver/Dec oder Page E-1 ST.RE.E10141.5 Annex E E. Factory Defaults Units are shipped with the following factory default parameters. These can be restored at any time using the System Menu. All other parameters are unaffected by restoring the factory defaults. Menu Description Default #2 Inpu[...]

Factory Defaults Page E-2 Reference Guide: TT1280 High Definition Profe ssional Receiver/ Decoder ST.RE.E10141.5 Menu Description Default CLIPPING LEVEL 18 dB AC3 DOWNMIX METHOD SURROUND STEREO ASYNC DATA ENABLED SYNC DATA (High Speed Ethernet Data Not Fitted) ENABLED ETH.NET DATA (High Speed Ethernet Data Fitted) ENABLED VITC INSERTION ENABLED CLO[...]