Teac A200 Bedienungsanleitung

computers.toshiba-europe.com computers.toshiba-europe.com A200 GMR300659EN0 GMR300659EN0 User ’ s Manual GMR300659xx0_Cover.ai 2007-02-14 14:07:03 GMR300659xx0_Cover.ai 2007-02-14 14:07:03[...]

User ’s Manual ii A200 Copyright © 2007 by TOSHIBA Corporation. All rights reserved. Under copyright law , this manual cannot be reproduced in any form without the prior written permission of TOSHIBA. No p atent liab ility is assu med, with respect to the use of the information contained herein. A200 Series Portable Personal Computer User's[...]

User ’s Manual iii A200 Other trademarks and registered trad emarks not listed above may be used in this manual. Macrovision License of Notice This product incorporates copyrigh t prot ection technology that is protected by methods and claims of certain U.S. patents and other intellectua l rights owned by Macrovision Corporation, an d other right[...]

User ’s Manual iv A200 n If you use an extension ca ble with your AC adapter , ensure that the to tal ampere rating of the products that are plugged into it do not exceed the ampere rating of the extension cab le itself. n T o help avoid the potential hazard of electric shock, do not connect or disconnect any cables or perform main tenance or rec[...]

User ’s Manual v A200 n Do not use the telephone to report a ga s leak in the vicinity of the leak. n Use only the power cord indicated in this manual. n Replace only with the same or e quivalent type battery recommended by the manufacturer . n Dispose of used batteries according to the manufacturer' s instructions. n T o reduce the risk of [...]

User ’s Manual vi A200 Optical Disc Drive Safety Instruction A A200 computer is shipped with one of the following drives preinstalled: DVD-ROM, CD-RW/DVD-ROM, or DVD Super Multi (+-R DL) drive. The optical drive that is used in this computer is equipped with a laser device. A classification label with the followin g sentence is affixed to the sur[...]

User ’s Manual vii A200 Modem warning notice Conformity S tatem ent The equipment has been approved to [Commission Decision "CTR21"] for pan- European single terminal connection to the Public Switched T elephone Network (PSTN). However , due to differences between the i ndividual PSTNs provided i n different countries/regions the approv[...]

User ’s Manual viii A200 Network Com p atibility St atement This product is designed to work with, and is compatible with the following networks. It has been tested to and found to confirm with the add itional requirements conditional in EG 201 121. S pecific switch settings or software setup are required for each network, please refer to the rel[...]

User ’s Manual ix A200 n Extreme heat, cold, or humidity . n Liquids and corrosive chemicals. Stress in jury Carefully read the Instruction Manual fo r Safety and Comfort . It contains information on the prevention of stre ss injuries to your hands and wrists that can be ca used by extensive keyboard use. Chapt er 3, Getting S tarted , also inclu[...]

User ’s Manual x A200 T able of Content s Chapter 1 A200 Features Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-1 Special f eatures . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1-7 TOSHIBA V alue Added Package . . . . . . . . . . . . . . . . . . .[...]

User ’s Manual xi A200 Chapter 4 Operating Basics Using the T ouchPad/Dual Mode Pad . . . . . . . . . . . . . . . . . . . . . . . . . 4-1 Dual Mode Pad Button func tion (Dual Mode Pad is provided wi th some models) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4-2 Using the W eb Camera. . . . . . . . . . . . . . . . . . . . . . [...]

User ’s Manual xii A200 Chapter 8 Optional Devices Express Card . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-1 SD/SDHC/MMC/MS/MS Pro/xD Memory cards . . . . . . . . . . . . . . . . . . 8-3 Memory expansio n . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8-6 Additional b[...]

User ’s Manual xiii A200 Preface Congratulations on your purchase of the A200 comp uter . Th is powerful notebook computer provides excelle nt expansion capability , including multimedia devices, and it is designed to provide years of reliabl e, high- performance computing. This manual tells how to set up and begi n using your A200 computer . It [...]

User ’s Manual xiv A200 Chapter 6, Power an d Power-Up Modes , gives details on the computer's power resources. Chapter 7, HW Setup , introduces yo u to the TOSHIBA Hardware Setup program. Chapter 8, Optional Devices , describes the optional ha rdware available. Chapter 9, T rou bleshooting , provides helpful information on how to perform so[...]

User ’s Manual xv A200 Display Messages Messages are used in this manual to bring important information to your attention. Each type of message is identified a s shown below . T erminology This term is defined in this document as follows: Equipment checklist Carefully unpack your computer . Save the box and packing materials for future use. Check[...]

User ’s Manual xvi A200 n TOSHIBA Assist n TOSHIBA SD Memory Card Format* n TOSHIBA Acoustic Silencer n TOSHIBA HW Setup n TOSHIBA V alue Ad d Package Utility n TOSHIBA Supervisor Password Utility n Ulead DVD MovieFactory ® n Online Manual * The availability of this software is depende nt on the model you purchased . Documentation n Y our co mpu[...]

User ’s Manual 1-1 A200 Features Chapter 1 A200 Features This chapter identifies the comp ut er's special features, options and accessories. Features Please visit your region's web site fo r the configuration details of the model that you have purchased. Processor Disclaimer (CPU) For more informa tion on the Discla imer regarding CPU, [...]

User ’s Manual 1-2 A200 Features Memory BIOS The graphics system in your computer may use part of the main system memory for graphics p erformance and therefore reduce the amount of system memory av ailable for other co mputing activities. The amount of system memory allocated to support graphics may vary depend ing on the graphics system, applic[...]

User ’s Manual 1-3 A200 Features Power Disclaimer (Battery Life) For more information on the Disclaimer regarding Battery Li fe, please refer to the Disclaimers section in Chapter 10. Floppy Disk Drive devices Battery Pack 3-cell Lithium Ion smart battery p ack with 10.8V*2000mAh* 6-cell Lithium Ion smart battery p ack with 10.8V*4000mAh 9-cell L[...]

User ’s Manual 1-4 A200 Features T ouchPad/Dual Mode Pad Display Disclaimer (LCD) For more information on the Disclaimer regardi ng LCD, please refer to the Disclaimers section in Chapter 10. Disclaimer (Graphics Processor Unit ("GPU") For more information on the Disclaimer regarding Graphic Processor Unit ("GPU"), please refe[...]

User ’s Manual 1-5 A200 Features Disclaimer (HDD Drive Capacity) For more information on the Disclaimer regarding HDD Drive Capacity , please refer to the Disclaimers section in Chapter 10. Slots (depending on configuration) Ports (depending on configuration) Multimedia Computers in this series can be confi gured with multiple types of opti cal d[...]

User ’s Manual 1-6 A200 Features Communications (depending on configuration) Security Security Lock Slot Sound system The integrated Windows ® compatible sound system provides support fo r internal speakers as well as jacks for an external microphone a nd headphones. Head phone jack A standard 3.5mm stereo jack is provided for the connection of [...]

User ’s Manual 1-7 A200 Features Sp ecial features The following features are eithe r un ique to TOSHIBA computers or are advanced features, which make the co mputer more convenient to use. TOS HI BA Value Added Package Key combinations that let you qu ickly modify the system configuration dire ctly from the keyboard without running a system conf[...]

User ’s Manual 1-8 A200 Features T OSHIBA V alue Added Package This section describes the TOSHIBA Component features pre-installed on the computer . Hibernation This feat ure lets you tu rn of f the power without exiting from your software. The contents of main memory are saved to the hard disk. When you turn on the power again, you can con tinue[...]

User ’s Manual 1-9 A200 Features Utilities and Applications This section describes preinstalled utilitie s and tells how to start them. For details on operations, refer to each utility’s online manual, help files or readme.txt files. TOS HI BA Accessibility The TOSHIBA Accessibility utility provides support to movement impa ireed users when the[...]

User ’s Manual 1-10 A200 Features Options Y ou can add a number of options to make your computer even more powerful and con venient to use. The foll owing options a re available: TOSHIBA Hardware Setup This program lets you customize your hardwa re settings according to the way you work with you r computer and the peripherals yo u use. T o access[...]

User ’s Manual 1-1 1 A200 Features AC adapter If you use your computer at more than one site frequently , it may be convenient to purchase an additional AC adapter for each site so you will not have to carry the adapter with you. USB Floppy Disk Drive Lets you attach a floppy disk drive to your computer by means of a USB cable.[...]

User ’s Manual 2-1 The Grand T our Chapter 2 The Grand T our This chapter identifies the various components of your computer . Become familiar with each component before yo u operate the computer . Front with the display closed The following figure shows the comp uter front with its display panel in the closed position. * The availability of thi [...]

User ’s Manual 2-2 The Grand T our DC IN LED The DC IN LED indicates the computer is connected to the AC ada pter and it is plu gged into an AC power source. Power LED In no rmal operating mode, the Pow er LED is blue (depending on the model you purchased). If the system is in Sleep Mode the LED will flash amber , while the LED will be off when t[...]

User ’s Manual 2-3 The Grand T our Right side The following figure shows the computer's righ t side. * The availability of thi s feature is depend ent on the model you purchased. The right side of the computer Headphone Jack The he adphone jack lets you connect stereo headphones or other audio-output devices such as external speakers. Connec[...]

User ’s Manual 2-4 The Grand T our Lef t side The following figure shows the comp uter's left side. * The availability of thi s feature is depend ent on the model you purchased. The left side of the computer Optical Disc Drive LED This indicator lets you know when the Optical Disc Drive is being accessed. Eject Button Opens the Optical Disc [...]

User ’s Manual 2-5 The Grand T our Back side The following figure shows the comp uter back panel. The back side of the computer LAN Jack This jack lets you connect to a LAN. The adapte r has built-in support for Ethernet LAN (10 Mbps, 10BASE-T), Fast Ether net LAN (100 Mbps , 100BASE-TX). T w o indicato rs built into the jack let you see the LAN [...]

User ’s Manual 2-6 The Grand T our Underside The following figure shows the undersi de of the computer . Make su re the display is closed before turning over your computer . The bottom of the computer 1. Expansion Memory Socket 2. HDD1 3. Battery Pack Lock 4. Battery Pack 5. Battery Pack Latch 6. Fan V ent 7. HDD2 5 1 3 6 4 7 2 Exp ansion Memory [...]

User ’s Manual 2-7 The Grand T our Front with the display op en The following figure show s the front of the computer with the display open. T o open the display , push the latch on t he front of the display and lift it up. Position the display at a comfortable viewing angle. * The availability of thi s feature is depend ent on the model you purc[...]

User ’s Manual 2-8 The Grand T our T o prolong the life of your display screen, use a screen saver when you're not using the computer and it is idle. Lef t and Right Speakers The computer provides two speakers for stereo sound reproduction. T ouchPad/Dual Mo de Pad The T ouchPad/Dual Mode Pad pointing de vice is located in the centre of th e[...]

User ’s Manual 2-9 The Grand T our Keyboard Indicators Next Button* Skip s forward to the next track, chapter or digital file. Refer to Chapter 4, Operating Basics , for details. (The availability of this functi on depends on the model you purchased.) Web Camera Power LED* Web Camera Power LED indicates Web Camera is working or not. (The availabi[...]

User ’s Manual 2-10 The Grand T our Optical Disc drive The computer has a dual layer DV D Super Multi drive supporting ±R Double Layer . An A T API interface controller is used for the operation of these optical drives. When the computer is accessing a disc, an indicator on the drive glows. Region codes for DVD drives and m edia The disc drive a[...]

User ’s Manual 2-1 1 The Grand T our DVD Super Multi drive sup porting ±R Double Layer The full-size DVD Super Multi drive sup porting ±R Double Layer module lets you record data to rewritable discs as well as run either 12cm (4.72") or 8cm (3.15") discs without using an adapter . This drive cannot use discs that allow writing faster [...]

User ’s Manual 2-12 The Grand T our AC Adapter (3-pin plug) Use of the wrong adapter could damage your computer. T OSHIBA assumes no liability for any damage in such case. The output rating for the computer is 19 volts DC. Please use on ly the AC Adapter su pplied with the computer or an AC adapter certified by TOSHIBA.[...]

User ’s Manual 3-1 Getting S tarted Chapter 3 Getting S t arted This chapter provides basic information to get you started using your computer . It cove rs the following topi cs: n Connecting the AC adapter n Opening the display n T urning on the power n S tarting up for the first time n T urning off the power n Resta rting the computer n Restori[...]

User ’s Manual 3-2 Getting S tarted 1. Connect the power cord to the AC adapter . Connecting the power cord to the AC a dapter 2. Connect the DC output plug on the AC adapter to the DC IN input port on the back of th e computer . Connecting the adapter to the computer 3. Plug the power cord into a live wall outlet. The Battery and DC IN indicator[...]

User ’s Manual 3-3 Getting S tarted 2. Lift the panel up and ad just it to the best vie wing angle for you. T urning on the power This section describes how to turn on the power . 1. If a USB floppy disk drive is connected, make su re the driv e is empty - i f a disk is in the drive, press the eject button to remove it. 2. Open the display panel.[...]

User ’s Manual 3-4 Getting S tarted T urning off the power The power can be turned off in one of three modes, either Shutdown (Boot) Mode, Hibernation Mode or Sleep Mode. Shut Down mode (Bo ot mode) When you turn off the power in Shut Do wn mode no data will be saved and the computer will boot to the opera ting system's main screen the next [...]

User ’s Manual 3-5 Getting S tarted Benefits of Sleep Mode The Sleep Mode feature provide s the following benefits: n Restore the previous working envir oment more rapi dly than does the Hibernation Mode feature. n Saves power by shutting down the system when the computer receives no input or hardware access for the time period set by the System [...]

User ’s Manual 3-6 Getting S tarted 3. Press the power button. Please note that this feature mu st be enabled - please refer to the Power Options (to access it, click Star t followe d by Control Panel follow ed by System and Maintenance an d then click the Power Options then select Choose what closing the lid do es ). When you turn the power back[...]

User ’s Manual 3-7 Getting S tarted S tarting Hibernation Mode T o enter Hibernation Mode, follow the steps below . 1. Click Start . 2. Click the arrow button ( ) in the power management buttons () . 3. Select Hibernate from the menu. Automatic Hibernation Mode The computer can be configured to enter Hibernate Mode au tomatically when you press t[...]

User ’s Manual 3-8 Getting S tarted 3. Press the power button and hold it do wn for five seconds. Once the computer has turned itself off, wait between ten and fifteen seconds before turning the power on again by pressing the power button. System Recovery Options About 1.5GB hidden partition is alloca ted on the hard disk drive for the System Rec[...]

User ’s Manual 3-9 Getting S tarted Restoring the preinst alled so f tware from the Product Recovery disc If preinstalled files are damaged, use the Product Recovery disc to restore them. T o restore the ope rating system and all prei nstalled software, follow the steps below . 1. Load the Product Recovery disc in the dr ive and turn off the comp[...]

User ’s Manual 4-1 Operating Basics Chapter 4 Operating Basics This chapter gives information on basic operation s including using the T ouchPad/Dual Mode Pad, optical disc drives, the internal modem, LAN and wireless LAN. It also provides ti ps on caring for yo ur computer and on heat dispersal. Using the T ouchPad/Dual Mode Pad T o use the T ou[...]

User ’s Manual 4-2 Operating Basics The T ouchPad/Dual Mode Pad has similar functions to a two-button mouse with a scroll wheel. For some functions, you ca n tap it instead of pressing a button. Dual Mode Pad Button function (Du al Mode Pad is p rovided with some model s) Dual Mode Pad Button Do not press on the T ouchPad /Dual Mode Pad too hard [...]

User ’s Manual 4-3 Operating Basics Using the Web Camera This section describes the bundl ed Web Camera utility , which can capture still and video i mages. The web camera will auto-run when Windows starts. ConfigFree ConfigF ree is a suite of utilities to allow easy control of communicati on devices and network connections. It also allows you to[...]

User ’s Manual 4-4 Operating Basics Using the software The web camera software is pre-configured to start when you turn on Windows Vista; if you need to restart it go to Star t  Prog rams  Camera Assist ant Softwa re  Camera Assistant Sof tware . 2 1 3 4 6 8 7 5 1. Capture still images 2. Video Recording 3. Audio Recording 4. Function 5.[...]

User ’s Manual 4-5 Operating Basics Using the internal modem This section describes how to setup the modem and use it to connect to other computer systems. Refer to the computer's online help files and the online help files for your modem software, for more information. * Some computers in this series are equi pped with Modem functional ity [...]

User ’s Manual 4-6 Operating Basics Region selectio n T elecommunication regulations vary from o ne country/region to another , so you will need to make sure the internal mo dem's settings are co rrect for the country/region in which it will be used. 1. Open the Modem Re gion Select a pplication. It is located on the Programs menu at T OSHIB[...]

User ’s Manual 4-7 Operating Basics Settings Y ou can enable or disab le the following settings: AutoRun Mode Region Select Utility starts automatic ally when you start up the operating system. Open the Dialing Properties dialog box after selecting region. The dialing p roperties dialog box wi ll be disp layed automatically after you select the r[...]

User ’s Manual 4-8 Operating Basics 1. Plug one end of the modular cable into the modem jack. 2. Plug the other end of the modular cable into a te lephone jack. Connecting the internal modem Disconnecting T o disconnect the internal modem cable, follow the ste ps below . 1. Pinch the lever on the connector in the telephon e jack and pull out the [...]

User ’s Manual 4-9 Operating Basics Connecting the L AN cable If you are using Ethernet LAN (1 0 Mbps, 10BASE-T), you can connect using either a CA T5 or a CA T3 cable. If you are using 100BASE-TX Fa st Ethernet or 1000BASE-T Gigabit Ethernet, you must connect using a CA T5 cable. T o connect the LAN cable, follow the steps below . 1. T urn off t[...]

User ’s Manual 4-10 Operating Basics n Frequency Channel Selection (2.4 GHz or 5 GHz) n Roaming over multiple channels n Card Power Management n Wired Equivalent Priva cy (WEP) data encryption Network It may not be p ossible to make a netwo rk connection to a specified network name using the ad hoc network function. If this occurs, the new networ[...]

User ’s Manual 4-1 1 Operating Basics Bluetooth wireless te chnology Bluetooth™ wireless technology eli minates the need for cables between electronic devices such as desktop co mputers, printers and mobile pho nes. Bluetooth wireless technology has the following features : Worldwide operation The Bluetooth radio transmitter an d receiver opera[...]

User ’s Manual 4-12 Operating Basics Product Support: The latest information regard ing Operating System support, Languag e Support or available upgrades can be found on our web site http://www .toshiba-europe.co m /computers/tnt/bluetooth.htm in Europe or http://www .pcsupport.toshiba.com in the United S tates. Wireless communication sw itch Y o[...]

User ’s Manual 4-13 Operating Basics Loading optical dis c media T o load a disc, follow the steps below . 1. Turn on the power . 2. a. Press the eject button to open the drawer slightly . Pressing the eject button b. Pressing the eject button will not op en the drawer when the computer's power is off. If the power is off, you can open the d[...]

User ’s Manual 4-14 Operating Basics 4. Lay the disc, label side up, in the drawer . Inserting a disc 5. Press gently at the center of the disc until you feel it click into place. The disc should li e below the top of the spind le, flush with its base. 6. Push the center of the drawer to close it. Press gent ly until it locks in place. Closing th[...]

User ’s Manual 4-15 Operating Basics Removing comp act discs T o remove the disc, fo llow the steps below . 1. T o pop the drawer partially open, pr ess the eject button. Gently pull the drawer out until it i s fully opene d. 2. The disc extends sl ightly over the si des of the drawer so you can grasp it. Hold it gently and lift it out. Removing [...]

User ’s Manual 4-16 Operating Basics 3. Change function of Buttons. TOSHIBA Button Support CD/DVD play control buttons In addition to the power button, the foll owing four b uttons control func tions relating to the playback of optical media and di gital audio data: W ri ting CDs/DVDs on a DVD Su per Multi drive supporting double layer disc recor[...]

User ’s Manual 4-17 Operating Basics n Any change or loss of the recorded contents of CD-R/RW or DVD-R/- RW/ +R/+R W /-RAM media that may be caused by writing or rewriting with this product, o r for any business profit lo ss or business inte rruption that may be caused by the change or loss of the recorded contents. n Damage that may be caused by[...]

User ’s Manual 4-18 Operating Basics n If the disc is poor in quality , dirty or damaged, writing or rewriting errors may occur . Be careful to check the disc for dirt or d amage before you use it. n The actual number of rewrites to CD-RW or DVD-RW/+RW/-RAM is affected by the quality of the disc and the way it is used. n There are two types of DV[...]

User ’s Manual 4-19 Operating Basics n DVD-RAM formatted by F A T32 cannot be read in Windows 2000 without DVD-RAM Driver Software. n When multiple drives that can write data to discs are connected, be careful not to write to the wrong drive. n Be sure to connect the universal AC adapter before you write or rewrite. n Before you enter Sleep/Hib e[...]

User ’s Manual 4-20 Operating Basics n Set the computer on a level surf ace an d avoid places subject to vibration such as airplanes, trains or cars. Do not use an unstable surface such as a stand. n Keep mobile p hones and other wirel ess communication devices away from the computer . n Always copy data from the hard disk drive to the CD. Do not[...]

User ’s Manual 4-21 Operating Basics Simplified steps for making a DVD-Video from adding a video so urce: 1. Click Start  All Programs  DVD MovieFacto ry for TOSHIBA  Ulead DVD MovieFactory for TOSHIBA Launcher to launch DVD MovieFactory . 2. Click Vi deo Disc  New Project to invoke 2nd Launcher , choose your project type, then invo k[...]

User ’s Manual 4-22 Operating Basics 2. Before recording the video to DVD: n When you record to DVD disc, please use only discs recommended by the Drive manufacturer . n Do not set the working drive to a slow device like a USB 1.1 hard disk drive or it will fai l to write DVD. n Do not perform any of the following actions: n Operate the computer [...]

User ’s Manual 4-23 Operating Basics n Y ou canno t back up a CD-ROM or CD-R/RW to DVD-R/-R W or DVD+R/+RW using the Disc Backup function of TOSHIBA Disc Ceator n Y ou ca nnot back up DVD-ROM, DVD-Video or DVD-R/-RW or DVD+R/+RW to CD-R/RW using T OSHIBA Disc Ceator n TOSHIBA Disc Ceator cannot record in packet format. n Y ou might not be able to[...]

User ’s Manual 4-24 Operating Basics Media Care This section provides tips on prot ecting data stored on your discs and disks. Handle your media with care. The following simple precauti ons will increase the lifetime of your medi a and protect the data stored on it: 1. S tore your discs in the container they came in to protect them and keep them [...]

User ’s Manual 4-25 Operating Basics TV -Out Use the TV -Ou t port to connect to a television. Be sure to use a 4 pin type S-video cable. For more details, see Appendix B, Display Modes . Setting up more than one display Y ou can set up your computer to utilize more than one display , effectively spreading a single desktop screen across two monit[...]

User ’s Manual 4-26 Operating Basics Cleaning the compu ter T o help ensure long, trouble-free o per ation, keep the computer free of dust and use care with liquids around th e computer . n Be careful not to spill liquids into the co mputer . If th e computer does get wet, turn the power o ff immediately and let th e computer dry comp letely befo[...]

User ’s Manual 5-1 The Keyboard Chapter 5 The Keyboard The computer's keyboard layouts are compatible with a 104/105-key enhanced keyboard. By pressing some keys in combination, all the 104/105-key keyboard functi ons can be executed on the computer . The number of keys on your keyboar d depends on which country/region's keyboard layout[...]

User ’s Manual 5-2 The Keyboard F1 ... F12 functio n keys The function keys, not to be confused with Fn, are the 12 keys at the top of your keyboard. These keys are dark gray , but function differently from the other dark gray keys. F1 through F12 are called function keys because they exec ute programmed functions when pressed. Us ed in combinati[...]

User ’s Manual 5-3 The Keyboard Press Fn + Ctrl to simulate the enhanced keyboard's right Ctrl key . Hotkeys Fn + ESC Mute – T urns the volume on and off. Fn + F1 Lock – Enters "Lock computer" mode. T o restore your desktop, you need to log on again . Fn + F2 Power Plan Mode – Displays the power save modes and lets you change[...]

User ’s Manual 5-4 The Keyboard Windows special keys The keyboard p rovides two keys tha t have special functio ns in Windows Vist a ™ . One activate s the St art menu and the other ha s the same fu nction as the secondary mouse button. This key activates the Windows Vista ™ S tart menu. This key has the same function as the Rig ht mouse butt[...]

User ’s Manual 5-5 The Keyboard Numeric mode T o turn on the Numeric mode, press Fn + F1 1 ( Numeric mode indicator lights). Now try numeric data entry using the keys below . Press Fn + F1 1 again to turn off the overlay . The numeric keypad overlay (U.S.) T emporarily using normal keyboard (ove rlay on) While using the overlay , you can te mpora[...]

User ’s Manual 5-6 The Keyboard T emporarily using overlay (overlay o ff) While using the normal keyboard, you ca n temporarily use the keypad overlay without turning it on: 1. Press and hold down Fn . 2. Check the keyboard in dicators. Pressing Fn turns on the most recently used overlay . If the Numeric mode indicator li ghts, you can use the ov[...]

User ’s Manual 6-1 Power and Power-Up Modes Chapter 6 Power and Power-Up Modes The computer's power resources incl ude the AC adapter and internal batteries. This chapter gives details on making the most effective use of these resources including charging and ch anging batteries, tips for saving battery power , and power u p modes. Pow er co[...]

User ’s Manual 6-2 Power and Power-Up Modes Power indica tors As shown in the above table, the Battery , DC IN and Power indicators alert you to the computer's operating capability and battery charge status Battery indicator Check the Battery indicator to determine the status of the battery . The following indicator lights indicate the batte[...]

User ’s Manual 6-3 Power and Power-Up Modes DC IN indicator Check the DC IN indicator to determine t he power status with the AC adapter connected: Power i ndica tor Check the Power indicator to determine the power status with the AC adapter connected: Battery types The computer has two types of batteries: n Battery pack n Real T ime Clock (RTC) [...]

User ’s Manual 6-4 Power and Power-Up Modes Real T ime Clock battery The Real Time Clock (RTC) battery provides power fo r the internal real time clock and calendar . It also maintains the system configuration. If the R TC battery becomes complete ly discharged, the system loses this data and the real time clock and calendar stop working. The fo [...]

User ’s Manual 6-5 Power and Power-Up Modes Safety precautions Mishandling of batteries can cause death , serious injury or property damage. Carefully observe the following advice: Danger: Indicates an imminently hazardous situation, which could result in death or serious injury , if yo u do not follow instructi ons. Wa r n i n g : Indicates a po[...]

User ’s Manual 6-6 Power and Power-Up Modes War n in g 1. Never allow caustic electrolyte fluid leaked from a battery pack to contact your eyes, skin or clothing. If caustic electrolyte fluid shou ld contact your eyes, immediately wash your e yes with large amou nts of running water and seek medica l attention, to help prevent eye da mage. It ele[...]

User ’s Manual 6-7 Power and Power-Up Modes Note 1. Never remove the battery pack while the W ake-up on LAN function is enabled. Data will be lost. Before you remo ve a battery pack, disable the W ake-up on LAN function. 2. T o ensure the batt ery pack maint a ins maximum capacity , operate the computer o n battery power on ce a week until the ba[...]

User ’s Manual 6-8 Power and Power-Up Modes Battery charging notice The battery may not charge right away under the following conditions: n The battery is extremely hot or cold. T o make sure the battery charges to its full capacity , charge the battery at room temperature of 10° to 30°C (50° to 86°F). n The battery is nearly completely disch[...]

User ’s Manual 6-9 Power and Power-Up Modes Monitoring batte ry capa city Remaining battery power can be monitored using the following methods. n Clicking the battery icon on the task bar n Via the Battery S tats in the Windows Mobility Center Windo w Maximizing battery op erating time A battery's usefulness depends on how long it can su ppl[...]

User ’s Manual 6-10 Power and Power-Up Modes Ret aining dat a with power o ff (Sleep mode) When you turn off your computer with fully charged batteries, the batteries retain data/charge for the following approximate time periods: * The availability of this battery is dependent on the model you purchased. Extending battery life T o maximize the li[...]

User ’s Manual 6-1 1 Power and Power-Up Modes 5. Unlock the Battery Pack Lock. Removing the battery pack-1 6. Slide the battery pack latch to the left, then pull the battery out of the battery bay . Removing the battery pack-2 1 2 3 4[...]

User ’s Manual 6-12 Power and Power-Up Modes Inst alling the battery p ack T o install a battery pack, follow the steps below . 1. T urn the computer's power off. 2. Disconnect all cables connecte d to the computer . 3. Hold the battery pack so that the label faces down and the connectors on the battery face the connectors on the computer . [...]

User ’s Manual 6-13 Power and Power-Up Modes User Password T o start the utility , po int to or click the following items: Launch: TOSHIBA Assist  SECURE  User Passw ord n Registered Click to register a password of up to 8 characters. Af ter a password is set, you will be pro mpted to enter it when you start the computer . n Not Registered [...]

User ’s Manual 6-14 Power and Power-Up Modes Power-up modes The computer has three power-up modes: n Hibernation (saves data in memory to the hard disk) n Sleep (power remains on, maintaining the data in memory , but the CPU and all other devices effectively enter a 'sleep' mode) n Boot (does not save data in memory) Panel power off/on [...]

User ’s Manual 7-1 HW Setu p Chapter 7 HW Setup This chapter explains how to us e the TOSHIBA HW Setup utility to configure your computer . TOSHIBA HW Setup lets you configure settings for various hardware devices through a number of tabs titled General, Password, Display , Boot Priority , Keyboard, CPU, LAN, and USB. Accessing HW Set up Click St[...]

User ’s Manual 7-2 HW Setu p Password This tab allows you to set or reset the user p assword for power on. Display This tab let s you customize your com puter's display settings for either the internal LCD screen or for an external monitor . Power On Display This option allows you to select the display to be used when the computer is switche[...]

User ’s Manual 7-3 HW Setu p T o select the boot drive you want, follow the steps below . 1. Boot-up your computer a nd press F12 to en ter the boot menu. 2. The boot select screen will be displayed : HDD1, HDD2, CD/DVD, and LAN. 3. Use the upper/lower cursor keys to highlight th e boot device you want and press Enter . Keyboard Wa ke-up on Keybo[...]

User ’s Manual 7-4 HW Setu p Built-in LA N This feature enables or disab les the Built-in LAN. Enabled Enables Built-in LAN function (Default). Disabled Disables Built-in LAN function.[...]

User ’s Manual 8-1 Optional Devices Chapter 8 Optional Devices Optional devices can expand the computer's capabilities and its versatility . This chapter describ es connection or in stallation of the following types of devices, which are available from your TOSHIBA dealer: Cards/Memory n Express Card Support 54/34 Express Card n SD (Secure D[...]

User ’s Manual 8-2 Optional Devices Inst alling an Express C ard One Express Card connector is located on the right side of the computer . The computer's hot-install feature lets you install Express Card while the computer's power is on. T o install an Express Card, follow the steps below . 1. Insert the Express Card. 2. Press gently to[...]

User ’s Manual 8-3 Optional Devices SD/SDHC/MMC/ MS/MS Pro/xD Memory car ds The computer is equi pped with a mul tip le digital media card slot that can accommodate SD/SDHC/MMC/MS/MS Pr o/xD memory cards. The se memory cards let you eas ily transfer data from devices, such as digita l cameras and Personal Digital Assistants, which use flash-memor[...]

User ’s Manual 8-4 Optional Devices Inst alling a memo ry card T o install a memory card: 1. Insert the memory card. 2. Press gently to ensure a firm connection. Inserting a memory card Removing a m emory card T o remove a memory card, follow the step s below: 1. Click the Safely Remove Hardwar e icon on the T askbar . 2. Select a devi ce, then c[...]

User ’s Manual 8-5 Optional Devices Memory card care 1. Do not write to a memory card if the battery power is low . Low power could affect writing accuracy . 2. Do not remove a memory card while read/write is in progress. 3. The memory card is designed so that it can be inse rted only one way . Do not try to force the ca rd into the slot. 4. Do n[...]

User ’s Manual 8-6 Optional Devices Memory exp a nsion Y ou can install additional me mory in the computer's memory mo dule socket to increase the amount of RAM. This section describes how to install and remove a memory module. Inst alling Memory on Bottom Side Follow these steps to inst all a memory module: 1. Set the computer to boot mode [...]

User ’s Manual 8-7 Optional Devices 5. Slide your fingernail or a thin object under the cover and lift it of f. Removing the memory module socket cover 6. Fit the module's connectors into the computer's connectors at about a 45 degree angle and press the modul e carefully to ensure a firm connection. 7. Push the module down so it li es [...]

User ’s Manual 8-8 Optional Devices 9. Replace the battery pack as described in Chapter 6, Power and Power - Up Modes . 10. T urn the power on and make sure the added memory is recognized. Removing Memo ry on Bottom Side T o remove the memory module, make sure the computer is in boot mo de then: 1. Be sure the power is off and all cables are disc[...]

User ’s Manual 8-9 Optional Devices Additional battery p ack Y ou can increase the portability of t he computer with add itional battery packs. If you're away from an AC power source and your battery runs low , you can replace it with a freshl y charged batte ry . See Chapter 6, Power and Power-Up Modes . Additional AC adapter If you frequen[...]

User ’s Manual 8-10 Optional Devices If a television is connected to the computer , set the TV type in Display Properties. Follow the steps below , ba sed on the configur ation of your computer: For Intel 1. Click Start  Control Panel  Appe arance and Person alization > Personalization . 2. Choose Display Se ttings .[...]

User ’s Manual 8-1 1 Optional Devices 3. Click the Advanced Settin g button. The Generic PnP Monitor and Intel ® 945GM Express Chipset Family dialo gue box opens. 4. Click the Graphics Propertie s button.[...]

User ’s Manual 8-12 Optional Devices 5. In the subsequent dialo gue box, click Display Devic es and then set up your television and notebook displays. For nVid ia 1. Click Start  Control Panel  Personalizati on . 2. Choose Display Se ttings .[...]

User ’s Manual 8-13 Optional Devices 3. Click the Advanced Settin gs button. Th e Generic PnP Monitor and NVIDIA GeForce Go 7300 Properties dia logue box opens. 4. Click St art the NVIDIA Control Panel .[...]

User ’s Manual 8-14 Optional Devices 5. Click Display item. 6. Click Change Displa y Configur ation item. 7. Setup your television an d notebook display .[...]

User ’s Manual 8-15 Optional Devices i.LINK (IEEE1394) i.LINK (IEEE1394) is us e d for high-speed data transfer for a range of compatible devices such as: n Digital video cameras n Hard disk drives n MO drives n Optical disc drives Precautions n Make a back-up of your data before transferring it to the comp uter . There is a possibility that the [...]

User ’s Manual 8-16 Optional Devices Disconnecting 1. Click the Safely Remove Hardwar e icon on the T ask Bar . 2. Point to i.LINK (IEEE1394) d evice and click. 3. Disconnect th e cable from the comp uter then from the i.LINK device. Security lock A security lock enables you to anchor your computer to a desk or other heavy object to help prevent [...]

User ’s Manual 9-1 T roubleshooting Chapter 9 T r oubleshooting TOSHIBA designed the computer for dur ability . However , shou ld problems occur , following the p rocedures in this chapter can help to determine the cause. All readers should become familiar with this chapter . Knowing what might go wrong can help prevent problems from occurring. P[...]

User ’s Manual 9-2 T roubleshooting Preliminary c hecklist Consider the simplest solution first. The items in this checklist are easy to fix and yet can cause what appears to be a serious problem. n Make sure you turn on all peripheral devices before you turn on the computer . This includes your printer and any other external device you are using[...]

User ’s Manual 9-3 T roubleshooting Record your observations so you can describe them to your deale r . Hardware and system checklist This section discusses problems ca used by your computer ’s hardware or attached peripherals. Basic problems may o ccur in the following areas: Sof tware The proble ms may be caused by your software. If you canno[...]

User ’s Manual 9-4 T roubleshooting System start- up When the computer does not start pr operly , check the following items: n Self T est n Power Sources n Power-on Password Self test When the computer starts up, the self test will be run automatically , and the following will be displaye d: This message remains on the screen for a few seconds. I[...]

User ’s Manual 9-5 T roubleshooting Power When the computer is not plugge d into an AC outlet, the battery pack is the primary power source. However , your computer has a number of o ther power resources, including an intelligent powe r supply and Real T ime Clock battery . These resour ces are interrelated and any one could affect apparent power[...]

User ’s Manual 9-6 T roubleshooting Battery If you suspect a problem with the battery , che ck the DC IN indicator as well as the indicators for the battery . For information on indicators and battery operation see Chapter 6, Power and Power-Up Modes . Problem Procedure Battery doesn't power the computer . The battery may be discharged . Con[...]

User ’s Manual 9-7 T roubleshooting Keyboard Keyboard problems can be caused by your setup configuration. For more information refer to Chapter 5, The Keyboard . LCD p anel Hard disk drive Problem Procedure Some letter keys produce numbers. Check that the nu meric keypad overlay is not selected. Press Fn + F10 and try typing again. Output to scre[...]

User ’s Manual 9-8 T roubleshooting Password i.LINK (I EEE1394) Wireless LAN If the following procedures do not re store LAN access, consult your LAN administrator . For more information on wireless communication, refer to Chapter 4, Operating Ba sics . Slow performance Y our files may be fra gmented. Run SCANDISK and defrag menter to check the c[...]

User ’s Manual 9-9 T roubleshooting Monitor Refer also to Chapter 8, Optional Devices , and to your monitor ’s documentation. Sound system Problem Procedure Monitor does not turn on Make sure that the external monitor's power switch is on. Confirm that the exte rnal monitor's power cable is plu gged into a working po wer outlet. No di[...]

User ’s Manual 9-10 T roubleshooting Pointing device If you are using a USB mouse, also refer to the USB section in this chapter and to your mouse documentation. T ouchPad/Dual Mode Pad USB mouse Problem Procedure On-screen pointer does not respond to Pad operation The system might be busy . If the pointer is shaped as an hourglass, wait for it t[...]

User ’s Manual 9-1 1 T roubleshooting USB Refer also to your USB device’ s documentation. TV output signal The mouse po inter moves too fast or too slow T ry changing the speed setting i n the mouse control utility . 1. Open the Control Panel , select the Mouse icon and press Enter . 2. Click the Pointer Options tab. 3. Set the speed as instruc[...]

User ’s Manual 9-12 T roubleshooting LAN Sleep/Hibernation Memory exp ansion Refer also to Chapter 8, Optional Devices , for information on installing memory modules. Problem Procedure Cannot access LAN or the W ake u p on LAN feature does not work Check for a firm cable connection between the LAN hub. Make sure the AC adapter is connected. Y ou [...]

User ’s Manual 9-13 T roubleshooting Modem Problem Procedure Communication software can't initialize the modem Make sure the computer's intern al modem settings are correct. Refer to Phone and Modem Options Properties in the Control Panel. Y ou can he ar a dial tone but can't make a call If the call is going through a PBX machine, [...]

User ’s Manual 9-14 T roubleshooting CDVD Super Multi drive w ith double layer disc recording suppo rt For more inform ation, refer to Chapter 4, Operating Basics . Problem Procedure Y ou cannot access a disc in the drive Make sure the drive's drawer is securely closed. Press gently until it clicks into place. Open the drawer and make sure t[...]

User ’s Manual 9-15 T roubleshooting Disk drive For information on disk care refer to Chapter 4, Operating Basics . Some discs run correctly , but others do not The software or hardware configuration may be causing a problem. Make sure the hardware configuration matches your software's needs. Check the disc's documentation. Check the ty[...]

User ’s Manual 9-16 T roubleshooting Real T ime Clock T OSHIBA support If you require any additional help using your computer or if you are having problems operating the computer, you may need to cont act TOSHIBA for additional techni cal assistance. Before you call Some problems you experience may be related to software or the operating system, [...]

User ’s Manual 10-1 Disclaimers Chapter 10 Disclaimers This chapter states the Disclaimer(s ) information applicabl e to TOSHIBA computers. CPU Central Processing Unit ("CP U") Performance Disclaimer. CPU performance in your comp uter pr oduct may vary from specifi cations under the following conditi ons: n use of certain external perip[...]

User ’s Manual 10-2 Disclaimers 64-Bit Computing. 64-bit processors are designed to take advantage of 32 and 64 bit computing. 64-bit computing requires that the following hardware and software requirements are met: n 64-bit Operating System n 64-bit CPU, Chipset and BIOS (Ba sic Input/Output System) n 64-bit Device drivers n 64-bit applications [...]

User ’s Manual 10-3 Disclaimers LCD Over a period of time, and depending on the usage of the computer , the brightness of the LCD scree n will de teriorate. This is an intrinsic characteristic of LCD technology . Maximum brightness is only available when operating in AC power mode. The screen will dim when the computer is opera ted on battery pow[...]

User ’s Manual A-1 S pecifications Appendix A S pecifications This appendix summarizes the computer's technical specifi cations. Dimensions 362mm (W) × 267.8mm (D) × 39.3mm (H. Max.) We i g h t S tarting at 2.72kg / 5.99lbs* * Weight may vary depending on product configuration, vendor components, manufacturing va riability and optio ns sel[...]

User ’s Manual A-2 S pecifications Environmental Requirements Built-in Modem Conditions Ambient temper ature Relative h umidity Operating 5°C to 35°C 20% to 80% Non-operating -20°C to 65°C Conditio ns Altitude (from sea level) Operating -30 to 10,000 feet Non-operating -30 to 40,000 feet Network control unit (NC U) T ype of NCU AA T ype of li[...]

User ’s Manual A-3 S pecifications Communication Spee d Data transmission and reception 300/1200/2400 /4800/ 7200/9600/120 00/14400/ 16800/19200/2 1600/24000/26400/2880 0/31200/ 33600 bps Data reception only with V .90 /V .92 28000/29333/3 0666/32000/33333/3466 6/36000/ 37333/38666/4 0000/41333/42666/4400 0/45333/ 46666/48000/4 9333/50666/52000/5[...]

User ’s Manual B-1 Display Modes Appendix B Display Modes This appendix contains a table listing all the display modes w hen the display is set to an external monitor . If you are running some applic ations (f or example a 3D a pplication or video playback and so on), you may see some disturbance, flickering or frame dropping on your screen. If t[...]

User ’s Manual B-2 Display Modes Displaying movies on a TV or CRT This section describes how to set up your system to display movies simultaneously on your computer's LCD and on an external TV or CRT monitor . T o connect a television, follow the ste ps below . 1. T urn the computer off. 2. Use a video cable (not supplied) to connect the tel[...]

User ’s Manual B-3 Display Modes 3. Click the Advanced Settin g button. The Generic PnP Monitor and Mobile Intel ® 945GM Express Chipset Family dialogue box opens. 4. Click the Graphics Propertie s button.[...]

User ’s Manual B-4 Display Modes 5. In the subsequent dialo gue box, click Display Devic es and then set up your television and notebook displays. For nVid ia 1. Click Start  Control Panel  Personalizati on . 2. Choose Display Se ttings .[...]

User ’s Manual B-5 Display Modes 3. Click the Advanced Settin gs button. Th e Generic PnP Monitor and NVIDIA GeForce Go 7300 Properties dia logue box opens. 4. Click St art the NVIDIA Control Panel .[...]

User ’s Manual B-6 Display Modes 5. Click Display item. 6. Click Change Displa y Configur ation item. 7. Setup your television an d notebook display .[...]

User ’s Manual C-1 AC Power Cord and Connectors Appendix C AC Power Cord and Connectors The power cord's AC input plug mu st be compatible with the various international AC power outlets and the cord must meet the standards for the country/region in which it is used. All cords must meet the following specifications: Certi fic ation agenci es[...]

User ’s Manual C-2 AC Power Cord and Connectors For the United S tates and Canada, two pin plug configuration must be a 2-15P (250V) or 1-15P (125V) and three p in plug coniguration must be 6-15P (250V) or 5-15P (125V) as design ated in the U. S. National Electri cal code handbook and the Canadian Electrical Co de Part II. The following illustra [...]

User ’s Manual D-1 If your computer is stolen Appendix D If your computer is stolen Should your comput er be stolen , however , we’ll help you try to find it. Before contacting TOSHIBA, please prepare the follo wing informati on which is necessary to uniquely identify your computer: n In which co untry was your co mputer stolen? n What type of [...]

User ’s Manual D-2 If your computer is stolen TOSHIBA Theft Registration Send to: T OSHIBA Europe GmbH T echnical Service and Support Leibnizstr . 2 93055 Regensburg Germany Fax number: +49 (0) 941 7807 921 Owner ’s details Country stolen: Machine type: (e.g. A200) Model number: (e.g. PSA30 YXT) Serial number: (e.g. 123456 78G) Date stolen: Y e[...]

User ’s Manual Glossa ry-1 Glossary Glossary The terms in this glossary cover topics related to this manual. Alternate naming is included for re ference. Abbreviations AC: alternating current AGP: accelerated graphics port BIOS: basic input output system CD-ROM: Compact Disc-Read Only Memory CD-RW : Compact Disc-Read/Write CMOS: complementary met[...]

User ’s Manual Glossa ry-2 Glossary ROM: read only memory RTC: real time clock SCSI: small computer system interface TFT : thin-film transis tor USB: Universal Serial Bus VESA: Video Electronic S tandards Association VGA: video graphics array WXGA: wide extended graphics array A adaptor: A device that provides an in terface between two dissimilar[...]

User ’s Manual Glossa ry-3 Glossary C cache memory: High speed memory which stores data that increases processor speed and data transfer rate. When the CPU reads data from main memory , it stores a co py of this data in cache memory . The next time the CPU needs that same data, it looks for it in the cache memory rather than the main memory , whi[...]

User ’s Manual Glossa ry-4 Glossary CRT : Cathode Ray T ube. A vacuum tube in which beams projected on a fluorescent screen-producing luminous spots. An example is the television set. cursor: A small, blinkin g rectangle or line that indicates the current position on the display screen. D DC: Direct Current. Electric current that flows in one dir[...]

User ’s Manual Glossa ry-5 Glossary format: The process of readying a blank disk for its first use. Formatting establishes the structure of the disk that the operatin g system expects before it writes file s or programs onto the disk. function keys: The keys labeled F1 through F12 that tell the computer to perform certain functions. G gigabyte (G[...]

User ’s Manual Glossa ry-6 Glossary L Light Emitting Diode (LED): A semiconductor device that emit s light when a current is applied. Liquid Crystal Display (LCD): Liquid crystal sealed between two sheets of glass coated with transparent conducting material. The viewing- side coating is etched into character forming segments with leads that exten[...]

User ’s Manual Glossa ry-7 Glossary P pa r i t y : 1) The symme trical relationship between two parameter values (integers) both of which ar e eith er on or off; odd or even; 0 or 1. 2) In serial communications, an error detection bit that is added to a group of data bits making the sum of the bits even or odd. Parity can be set to none, odd, o r[...]

User ’s Manual Glossa ry-8 Glossary T terminal: A typewriter-like keyboard and CRT display screen connected to the computer for data in put/output. TFT display: A liquid crystal display (LCD) made from an array of liquid crystal cells using active-matrix tech nology with thin film transistor (TFT) to drive each cell. T ouchPad/Dual Mode Pad: A po[...]