Technicolor - Thomson PT-AE2000E Bedienungsanleitung

E NGLISH Operating Instructions LCD Projector Model No. PT-AE2000E Before operating this product, please read th e instruct ions carefully and sa ve th is manual for future use. TQBJ0234[...]

Important Information 2 - E NGLISH Important Safety Notice Dear Panasonic Customer: This instruction booklet provides all th e nec essary operating inform ation that you might requ ire. We hope it will help you to get the most out of your new product, and that you will be pleased with your Panasonic LCD projector. The serial number of your prod uct[...]

Important Information Important Safety Notice E NGLISH - 3 IMPORTANT: THE MOULDED PLUG (U.K. only) FOR YOUR SAFETY, PLEASE READ TH E FOLLOWING TEXT CAREFULLY. This appliance is supplied with a moulded three pin mains plug for your safety and convenience. A 13 amp fuse is fitted in this plug. Should the fuse need to be replaced, plea se ensure that [...]

4 - E NGLISH Contents J Quick steps Important Information Important Safety Notice . ............. ............. ............. 2 Precautions with regard to safety ................... .... 6 WARNINGS .............. ............ ........... ........... ........... ...... 6 CAUTIONS ............... ............ .............. ........... ..............[...]

Preparation Getting Started Basic Operation Settings Maintenance Appendix E NGLISH - 5 Contents Important Infomation Settings Menu Navigation ...................... ................ ............ 28 Main menu and sub-menu ....... .............. .............. ..... 28 Navigating through the MENU .... .............. .............. .. 30 PICTURE menu [...]

Important Information 6 - E NGLISH Precautions with regard to safety If you notice smoke, stra nge smells or noise co ming from the projector, disconnect t he mains plug from the mains socket. Do not continue to use the projector in such cases, otherwise fire or electric shocks could res ult. Check that no more smoke is coming out, and then contact[...]

Precautions with regard to safety E NGLISH - 7 Important Information Do not use the projector in a bath or s hower. Fire or electric shocks can re sult. Do not place your skin into the light beam wh ile the projector is being used. S trong light is emitted from the projector’s lens. If you place directly into this lig ht, it can hurt or damage yo[...]

Precautions with regard to safety 8 - E NGLISH Important Information Do not cover the ai r inlet port or the ai r outlet por t. Doing so may cause the proj ector to overheat, which can cause fire or da mage to the project or . Do not place th e projector in narrow , ba dly ventilated places such as closet s or bookshelves. Do not place the projecto[...]

Precautions with regard to safety E NGLISH - 9 Important Information Ask an Authorised Servic e Centre to clean inside the projector at least once a year. If dust is left to bui ld up inside the projector without being cleaned out, it can result in fire or p roblems with operation. It is a good idea to clean the inside of the projector before the s[...]

Precautions with regard to safety 10 - E NGLISH Important Information In order to get the best picture qu ality Draw curtains or blin ds over an y windows and turn off any lights near the screen to pre vent outside light or light from indoor lamps fr om shining onto the screen. Do not touch the surfaces of the lens with your bare hands. If the surf[...]

E NGLISH - 11 Preparation About Your Projector Remote control NOTE: • Do not drop the remote control. • Avoid contact with liquids or moisture. • Use manganese batteries or alkaline batteries with the remote control. • Do not attempt to modify or disassemble the remote co ntrol. Contact an Authorised Service Centre for repairs. • Do not k[...]

Preparation About Your Projector 12 - E NGLISH J T op and front view Projector body NOTE: • Do not cover the ventilation openin gs or place anything within 50 cm (20") of th em as this may cause damage or injury . • While the proj ector is not in use , keep the lens cove r to protect the lens. (Push to open/close the cover.) RETURN Return [...]

Preparation About Your Projector E NGLISH - 13 J Back and bottom view NOTE: • Do not cover the ven tilation openings or place anything within 50 cm (20") of them as this may cause damage or injury . • The projector should only be used with the attached mains l ead to ensure optimum performanc e and avoid damage to the projector . • Do no[...]

Getting Started 14 - E NGLISH Setting up You can adjust the projection size with 2.0x zoom lens . Calculate and de fine the throw distance as follows. * All measurements above are app roximate and may differ slightly from the actual measurements. J Calculation methods fo r screen dimensions Y ou can calculate more detailed screen dimension from the[...]

Getting Started Setting up E NGLISH - 15 You can use the pr ojector with any of the following 4 proje cti on methods. To set the desired method i n the projector, See “INSTALLATION” on page 41. You can screw up/down the fron t leg adjusters to control the a ngle of the pro jector for ad justing the throwing a ngle. See “Positioning the imag e[...]

Getting Started Setting up 16 - E NGLISH If the projector is not positio ned right in front of the cent re of the screen, you can adju st the pr ojected image position by moving t he lens shift dials within th e shift range of the lens . J Adjusting the lens shif t dials Q Horizont al shif t Y ou can place the projector where the projector lens is [...]

Getting Started Setting up E NGLISH - 17 J Projector location range Y o u can determine wh ere to locate the screen and the projector by considering the lens shift possibilities. See “Positioning the image” on p age 21. Q When the screen position is fixed Q When the projector position is fixed NOTE: • When the projector is l ocated right in f[...]

Getting Started 18 - E NGLISH Connections Read and follow the operating and con necting instructions o f each peripher al device. The peripher al devices must be turned off. Use cables that match each peripheral de vice to be connected. Confirm the type of video signals. See “L ist of compatible signals” on page 47 . Audio cables must be connec[...]

E NGLISH - 19 Basic Operation Switching the projector on/off J Connecting 1. Make sure the shape of the mains plug a nd the AC IN connector on the back of the projector match, then push the plug all the way in. 2. Connect the mains lead to a mains socket. J Disconnecting 1. Make sure the MAIN POWER is switched off and unplug the mains lead from the[...]

Basic Operation Switching the projector on/off 20 - E NGLISH 1. Switch the MA IN POWER button on. The power indicator li ghts up in red. 2. Remove the lens cover from the lens. 3. Press the POWER button. The power indicator lights up in green after flashing for a while. The STARTUP LOGO is displayed on the scree n. See “ST AR TUP LOGO” on page [...]

E NGLISH - 21 Basic Operation Projecting an image 1. Switch on the connected devices. Press the play button of the required device. 2. Press the INPUT button to se lect the requir ed input method if needed. See “Switching the input signal” on pag e 23. The image will b e projected on the scree n. 1. Press the ASPECT button to select the require[...]

22 - E NGLISH Basic Operation Remote control operation You can operate th e projector with the remote control within the remote range 7 m (22'11"). Q Facing to the projector Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector an d press th e required bu ttons to operate. Q Facin[...]

Basic Operation Remote control operation E NGLISH - 23 You can switch the input method manually by pressing the INPUT button. Press the button several times or press I H to cycle through the input methods as follows . The actual projected image will be changed in a while. The graphical guidance will be displayed on the upper right of the projected [...]

Basic Operation Remote control operation 24 - E NGLISH You can display the image brightne ss and contrast level of the input signal with a waveform. See “WAV EFORM MONITOR” on page 32. J Displaying the waveform 1. Press the WAVEFORM button and display the waveform monitor . Press the WAVEFORM button again to escape from the waveform mode. 2. Pr[...]

Basic Operation Remote control operation E NGLISH - 25 Q Adjusting with RGB options 1. Press the ENTER button until the require d option is displayed. 2. Press the PIC. ADJUST twice to display the GAMMA of the ADVANCED MENU men u. 3. Press G several times to di splay th e required brightness option. 4. Adjust the brightness optio n by pressing I H [...]

Basic Operation Remote control operation 26 - E NGLISH You can adjust a selected colour individually and sa ve and retrieve u nder the PICTURE MODE setting. Press the COLOR M. button to open the menu. J Create a new profile Q Adjusting the selected colour Select a colour and adjust COLOUR , TINT and BRIGHTNESS . 1. Select the CURSOR menu and press [...]

Basic Operation Remote control operation E NGLISH - 27 Q Saving a log sett ing as a profile Return to the COLOUR MANAGEMENT menu and save the stored log as a profile. Make sure that the PICTURE MODE is not switched. 1. Select the PROFILE SAVE menu and pr ess ENTER The PROFILE SAVE menu is displayed. Y ou can save the prof ile as USER1 , USER2 and U[...]

28 - E NGLISH Settings Menu Navigation The menu system allows you to acce ss functions which do not have their own dedicated buttons on the remote control. The menu options are str uctured and cat egorised. You can navigate th rough the menu with F G H I buttons. Main menu and sub-menu NOTE: • Some default settings vary by th e selected input sig[...]

Menu Navigation E NGLISH - 29 Settings Main menu Sub-menu Options (Underlined is def ault setting) Page POSITION H-POSITION • Default: 0 page 36 V-POSITION • Default: 0 page 36 DOT CLOCK *1 *1. COMPUTER signals only • Default: 0 page 36 CLOCK PHASE *2 *2. COMPUTER / COMPONENT signals only • Default: 0 page 36 ASPECT 4:3 16:9 14:9 page 36 ZO[...]

Settings Menu Navigation 30 - E NGLISH J Displaying the main menu Press the MENU button to display the main menu and the operating guid ance. J Adjusting with the bar scale items The triangle mark under the bar indicates facto ry default setting and the square indicates th e current setting. J Returning to the previous menu Press the MENU or RETURN[...]

E NGLISH - 31 Settings PICTURE menu Depending on the projection environmen t, you can use these preset parameter settings to op timise image projection. Press I H to cycle through the options. You can adjust the contr ast of the projected imag e. Adjust the BRIGHTNESS in advance if necessary. Setting range: -64 to +6 4 You can adjust the brigh tnes[...]

Settings PICTURE menu 32 - E NGLISH You can adjust the white balance o f the projected image. Setting range: -6 to +6 You can switch automatic adjustment of the lamp and the lens iris on/off. ON : Automat ic adjustmen t OFF : No adjustment You can monitor whether or not the luminance l evel of the input signal is in the recommended rang e by displa[...]

PICTURE menu E NGLISH - 33 Settings Q Adjusting the image in a split window 1. Select AREA SELECT and press the ENTER button. The image will b e frozen a nd the area cursor wil l be displayed. 2. Press I H to move the area cu rsor to select the required area an d press the ENTER button . The selected frozen image will be displayed in a split window[...]

Settings PICTURE menu 34 - E NGLISH J COLOUR MANAGEMENT Y ou can manage your own defined colour setting s. See “Setting your own colour profile” on p age 26. J xvYCC Y ou can switch on/off the au tomatic adjustment system for signals which complied with xvYC C. ON : Active OFF : Deactive J DETAIL CLARITY Y ou can switch on/off the au tomatic de[...]

PICTURE menu E NGLISH - 35 Settings You can edit the named memory settings. Q Deleting a memory setting 1. Select MEMORY DEL and press the ENTER button. 2. Select the required memo ry setting and press the ENTER button. If you select ALL DELETE , you can delete all of the saved memory settings. 3. Select OK in the confirmation screen and press the [...]

36 - E NGLISH Settings POSITION menu You can move the projected imag e horizontally for fine adjustment. You can move the projected imag e vertically for fine adjustment. If you have in terference patterns of the projecte d image, which is sometimes referred to as moire or noise, you can minimize it by pressing I H to adjust the clock frequency. (A[...]

POSITION menu E NGLISH - 37 Settings J Aspect ratio options an d projection example If you apply the aspect ratio options to the projected image, the resu lt will be as follows. The result may differ due to the input signals. See “Switchin g the aspect ratio” on pa ge 23. Q VIDEO/S-VIDEO/COMPONENT Not available with 1 125 (1 080)/50i, 1 125 (1 [...]

Settings POSITION menu 38 - E NGLISH WSS (Wide Screen Signalling) detects if a PAL / 625p (576p)/625 i (576i) signal is input and that signal has an identification signal, and switch the aspe ct ratio to required settin g automatically. You can switch the system off manually. If the 4 edges of an image is partly dropped, you ca n use this function [...]

E NGLISH - 39 Settings LENS CONTROL You can use the 2 different test patterns to adjust the focus and zoom of the image. See “L ens shift and positioning” on page 1 6. 1. Press ENTER to display test pattern 1. Press F G to adjust the focus and I H to adjust the zoom. 2. Press ENTER to display test pattern 2. Press F G to adjust the focus and I [...]

40 - E NGLISH Settings OPTION menu When you change the input method, th e guidance appears in the upper right co rner of the screen. The following display methods are availa ble. Press I H to cycle through the options. You can change the backg round colour of the menu. Press I H to cycle through the options. TYPE1 Semi transparent black TYPE2 Solid[...]

OPTION menu E NGLISH - 41 Settings When installin g the project or, select th e projecti on method acco rding to th e projector position. Pre ss I H to cycle thro ugh the option s. See “Projectio n method” on page 15. You can select the requir ed duration of time and set th e off timer to turn off the powe r of the projector automatically. 3 mi[...]

42 - E NGLISH Maintenance TEMP and LAMP Indicators If a problem shou ld occur with the projector , the LAMP and/or TEMP indicators will inform you. Manage the indicated problems as follow. 1. Confirm the st atus of all indicators and projector , and switch off the projector in prop er way . 2. Find ou t the cause of the problem by status of the LAM[...]

E NGLISH - 43 Maintenance Care and Replacement J Before cleaning the pro jector Switch off the MAIN POWER switch in proper way and disconnect the mains plug fro m the mains socket. Unplug all the cables from the projector . J Cleaning the outer sur face of the projector Wipe off dirt and dust gently with a sof t cloth. If it is difficult to remove [...]

Maintenance Care and Replacement 44 - E NGLISH J Before replacing the lamp unit Switch off the MAIN POWER button in proper way and disconnect the mains plug from the mains socket. Make sure the lamp unit and the surroundings are cooled enoug h. Unplug all th e cables from the projector. Prepare a Phillips-head screwdriver . Contact an Authorised Se[...]

Care and Replacement E NGLISH - 45 Maintenance J Removing and replacing the lamp unit 1. Use a Phillips screw driver to l oosen the 3 lamp unit fixing screws until the screws turn freely . 2. Hold the handle of the lamp unit and release the lamp unit lock. 3. Pull out the lamp unit gently from the pr ojector . 4. Replac e the new lam p unit while m[...]

46 - E NGLISH Maintenance Troubleshooting Should any problem pers ist, contac t your deale r. Problem Cause Reference pa g e Power does not turn on. The mains lead may not be connected. The MAIN POWER switch is turned o ff. No electric supply is at the mains socket. TEMP indicator is lit or flashes. LAMP indicator is lit or flashes. The lamp unit c[...]

E NGLISH - 47 Appendix Technical Information List of comp atible signals Mode Displa y Display resolution (dot s) *1 *1. The “i” appearing after the re solution indicates an interlaced signal. Scanning frequency Dot c lock frequency (MHz) Picture quality *2 *2. The following symbols are used to i ndicate picture q uality. AA Maximum picture qua[...]

Appendix Technical Information 48 - E NGLISH The serial connector which is on the connecto r panel of the projector conforms to the RS-232C inter face specification, so that the projector ca n be controlled by a persona l computer which is connected to th is connecter. J Connection J Pin assignment s and signal names J Cable specifications (When co[...]

Technical Information E NGLISH - 49 Appendix J Communication settings J Control commands Signal level RS-232C Character leng th 8 bits Sync. method Asynchronous Stop bit 1 bit Baud rate 9 600 bps X p arameter None Parity None S p arameter None Command Control content s Remarks PON POWER ON In standby mode, all commands other than the PON command ar[...]

Appendix Technical Information 50 - E NGLISH J Inquiry commands Command Control cont ent s Parameter QPW Power status 00 0 = OFF 001 = ON QFZ FREEZE status 0 = OFF 1 = ON QIN INPUT signal status CP1 = COM PONENT1 IN SVD = S-VIDEO IN HD1 = HDMI1 IN HD3 = HDMI3 IN CP2 = COMPONENT2 IN VID = VIDEO IN HD2 = HDMI2 IN RG1 = COMP UTER IN QOT SLEEP status 0[...]

Technical Information E NGLISH - 51 Appendix The projector and the ceiling mount bracke t are designed sufficiently safety though, make sure the safety cable provided with the projector is insta lled and attached to the bottom of the projector when mounting in the ceiling for safety and security. J Inst alling the safety cable 1. Install the ceilin[...]

Appendix Technical Information 52 - E NGLISH S pecifications Power supply AC 100 - 240 V 50 Hz/60 Hz Power consumption 240 W During standby (when fan is stopped ): 0.08 W Amp s 2.8 A - 1.2 A LCD panel Panel size (diagonal) 0.74 typ e (17.78 m m) Aspect ratio 16 : 9 Display method 3 transparen t LCD panels (RG B) Drive method Act ive matrix method P[...]

Technical Information E NGLISH - 53 Appendix T erminals S-VIDEO IN Single - line, Mini DIN 4p Y: 1.0 V [p-p], C: 0.286 V [p-p], 75 Ω VIDEO IN Single - line, RCA pi n jack1. 0 V [p-p], 75 Ω COMPUTER IN Single - line, D - sub HD 15-pin (female) Selectable for input and output by men u operation. R.G.B. 0.7 V [p-p], 75 Ω G.SYNC 1.0 V [p-p], 75 ?[...]

Appendix Technical Information 54 - E NGLISH Dimensions 300 (1 1-23/32) 460 (18 -3/32) 230 (9 -1/32) 15 (19/6) 147 (5 -25/32) 60 (2 -5/16) 11 6 (4 -9/16) 130 17 (-21/32) Unit: mm[...]

Technical Information E NGLISH - 55 Appendix VGA and XGA are trad emarks of Int ernational B usiness Machin es Corporation . S-VGA is a regi stered trademark of the V ideo Electro nics S tandards Association. HDMI, the HDMI logo and High- Definition Multimedia Interface ar e trademarks or registered trademar ks of HDMI Licensing LLC. The font used [...]

56 - E NGLISH Appendix Index A AC IN ................ ................ ............. ................ ......... 13 Accessories ........... ................ ................. ................ .. 10 ADVANCED MENU ................ ............. ................. ..... 33 Air exhaust port ............ ................ ................ ............ 12 A[...]

Appendix Index E NGLISH - 57 M MAIN POWER .............. ............ ................. ............... 12 Mains lead Accessory ....................... ................ ................. ..10 Connecting ...... ................ ................ ................. ..19 MEM.LOAD Remote control button ................ ................ .........11 Remote[...]

Matsushita Electric Industrial Co., Ltd. Web Site: http://panasonic.net © 2007 Matsushita Electric Industrial Co., Ltd. All Rights Reserved. Printed in Japan S0807-1087B[...]