Technika LCD32-209V Bedienungsanleitung

LCD32-209V LCD32-209V COLOUR TELEVISION WITH REMOTE CONTROL OPERA TING INSTRUCTIONS For assistance, please call our T esco Electrical Helpline on 0845 4566767[...]

English - 1 - Contents Features ................................................................. 2 Accessories ............................................................ 2 Introduction ............................................................. 2 Preparation ............................................................. 2 Safety Precautions ...[...]

English - 2 - Features • Remote controlled colour LCD TV . • Fully integrated digital TV (DVB-T). • HDMI connectors for digital video and audio. This connection is also designed to accept high de fi nition signals. • 200 programmes from VHF , UHF(analogue). • 300 programmes for digital mode (IDTV). • OSD menu system. • Scart socket f[...]

English - 3 - Safety Precautions Please read the following recommended safety precautions carefully for your safety . Power Source The TV set should be operated only from a 220-240 V AC, 50 Hz outlet. Ensure that you select the correct voltage setting for your convenience. Power Cord Do not place the set, a piece of furniture, etc. on the power cor[...]

English - 4 - Headphone V olume Excessive sound pressure from earphones and headphones can cause hearing loss. Installation T o prevent injury , this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available). LCD Screen The LCD panel is a very high technology [...]

English - 5 - Overview of the Remote Control ABC ABC AB C DEF DEF DEF GHI GHI GHI JKL JKL JKL MNO MNO MNO PQR PQR PQR STU STU STU VWX VWX VWX YZ YZ YZ 1 2 3 4 5 6 7 8 9 0 AV A V SOURCE SOURC E EXIT EXIT EXIT -/-- -/- - INFO INFO INF O I-II I-II MENU MENU TV/DTV TV/ DTV TV/ DTV P/CH P/CH OK SE L EC T SE L EC T WIDE WIDE WIDE GUIDE GUIDE GUIDE PP PP [...]

English - 6 - MENU TV/AV P/CH MENU TV/AV P/CH LCD TV and Operating Buttons Standby button 1. TV/A V button 2. Programme Up/Down buttons 3. V olume Up/Down buttons 4. Note: Press “ ”/“ ” buttons at the same time to view main menu. Viewing the Connections- Back Connectors SCART socket 1. inputs or outputs for external devices. Connect the SCA[...]

English - 7 - S/PDIF Out 4. outputs digital audio signals of the currently watched source. Use an S/PDIF coaxial cable to transfer audio signals to a device that has S/PDIF input. Y ou should also set SPDIF Out option in the Sound Menu as On. RF Input 5. connects to an antenna or a cable. Note that if you use a decoder or a media recorder , you sho[...]

English - 8 - Power Connection IMPORT ANT : The TV set is designed to operate on 220-240V AC, 50 Hz. • After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains. • Plug the power cable to the mains socket outlet. Connecting to a DVD Player If you want to connect a DVD player to your LCD TV ,[...]

English - 9 - Connecting Other Equipment via Scart Most devices support SCART connection. Y ou can connect a; DVD recorder , a VCR or a decoder to your LCD TV by using the SCAR T socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections. For more information, refer to yo[...]

English - 10 - Basic Operations Y ou can operate your TV using both the remote control and onset buttons. Operation with the Buttons on the TV V olume Setting • Press “ ” button to decrease volume or button to increase volume, so a volume level scale (slider) will be displayed on the screen. Programme Selection • Press “ P/CH + ” button[...]

English - 1 1 - After Automatic Search is completed, the following message asking for analogue channel search appears on the screen: T o search for analogue channels, select “Y es”. TV switches to the analogue TV mode. Analogue search menu will be displayed. Select your Country , Language and T ext language by using “ ” or “ ” and “ ?[...]

English - 12 - RED button (Shrink) : makes the info boxes smaller . GREEN button (Expand) : makes the info boxes larger . YELLOW button (Prev . Day) : displays the programmes of previous day . BLUE button (Next day) : displays the programmes of the next day . INFO (Details) : displays the programmes in detail. Numeric buttons (Jump) : go to preferr[...]

English - 13 - Navigating the Entire Channel List Press “ ” or “ ” button for selecting the previous or next channel. Y ou can press RED or GREEN button to move page up or page down. T o watch a speci fi c channel, highlight it using “ ” or “ ” button and then press “ OK ” button, while the “Select” item on Channel List men[...]

English - 14 - lock a channel you should know the parental lock password (default value is set to 0000 in the factory and can only be changed from the Con fi guration menu). Select the channel to be locked by highlighting it and select the Lock option by pressing “ ” or “ ” button. When the OK button is pressed, a dialog OSD asking for the[...]

English - 15 - Some Digital T errestrial channels operate on a Pay Per View basis. These require a subscription and a hardware decoder . Obtain the Conditional Access Module (CAM) and the viewing card by subscribing to a pay channel company , then insert those to the TV using the following procedure. • Switch off the TV and unplug from the mains.[...]

English - 16 - Channel List Use “ ” or “ ” buttons to go to Channel List option. Use “ ” or “ ” buttons to toggle Channel List Mode. If you select “TV Only”, with the “ ” or “ ” buttons, you navigate through only TV channels. If you select “Radio Only”, with the “ ” or “ ” buttons, you navigate through only r[...]

English - 17 - Set PIN Use “ ” or “ ” buttons to go to “Set PIN” option. Press OK to display the “Set PIN” window . Use numeric buttons to enter new pin number you will need to input your new pin a second time for veri fi cation purposes. The factory default pin number is 0000, if you change the pin number make sure you write it do[...]

English - 18 - Note: If the Country option is set to Denmark, Sweden, Norway or Finland, the Language Settings menu will function as described below: Language Settings In the con fi guration menu, highlight the Language Settings item by pressing “ ” or “ ” buttons. Press OK and Language Settings submenu will be displayed on the screen: Use[...]

English - 19 - In both manual and auto search any existing channel in the database is not re-stored to avoid redundant duplicates of that channel. Clear Service List (*) (*) This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland. Use this setting to clear channels stored. Press “ ” or “ ” button to[...]

English - 20 - Noise Reduction If the broadcast signal is weak and the picture is noisy , use Noise Reduction setting to reduce the noise amount. Press “ ” or “ ” button to select Noise Reduction. Press “ ” or “ ” to choose from one of these options: Low , Medium , High or Off . Film Mode Films are recorded at a different number of [...]

English - 21 - Headphone Press “ ” or “ ” button to select Headphone . Press “ ” button to view the headphone menu. Note: Headphone will be disabled when SPDIF option is set to on. Headphone sub-menu options are described below: V olume Press “ ” or “ ” button to select V olume . Press “ ” button to increase headphone volume[...]

English - 22 - Menu Background Press “ ” or “ ” button to select Menu Background . Y ou can set menu background level by pressing “ ” or “ ” button. Backlight This setting controls the backlight level. Select Backlight by pressing “ ” or “ ” button. Press“ ” or “ ” button to set Backlight to Auto, Medium , Maximum or[...]

English - 23 - Colour System Press “ ” or “ ” button to select Colour System . Use “ ” or “ ” button to change the colour system to P AL, SECAM, P AL60, AUT O, NTSC 4,43 or NTSC 3,58. Store Press “ ” or “ ” button to select Store Programme . Press “ ” or OK button to store the settings. “ Stored... ” will be displaye[...]

English - 24 - In source menu, highlight a source by pressing “ ” or “ ” button and switch to that mode by pressing “ ” button. Source options are; TV , DTV , EXT -1 , FAV , HDMI-1 , HDMI-2 and YPbPr Note : Once you have connected optional equipment systems to your TV , you should select the required input to view pictures from that sou[...]

English - 25 - Cinema This zooms up the wide picture (16:9 aspect ratio) to the full screen. Subtitle This zooms up the wide picture (16:9 aspect ratio) with subtitles to the full screen. Zoom This option zooms to the picture. Note: Y ou can shift to screen up or down by pressing “ ” / “ ” buttons while picture zoom is selected as panaromic[...]

English - 26 - Mountains or high buildings can cause double pictures or ghost images. Sometimes you can improve the picture quality by changing the direction of the aerial. Is the picture or teletext unrecognisable? Check if you have entered the correct frequency . Please retune the channels. The picture quality may degrade when two peripherals are[...]

English - 27 - Speci fi cations TV BROADCASTING P AL/SECAM B/G D/K K’ I/I’ L/L ’ RECEIVING CHANNELS VHF (BAND I/III) UHF (BAND U) HYPERBAND Digital Reception MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Pro fi le 1 for UK Object carousel support compliant with ISO/IEC 135818-6 and UK DTT pro fi le Frequency range: 474-850 MHz for[...]

English - 28 - Important Instruction For your own safety read following instruction carefully before attempting to connect this unit to the mains supply . MAINS (AC) OPERA TION The wires in the mains lead are coloured in accordance with the following code : IMPORT ANT As the colours of the wires in the mains lead of this appliance may not correspon[...]

5 0 1 5 3 0 2 4[...]