Tenda N60 Bedienungsanleitung

Concurrent Dual Band W ireless N600 Gigabit Router 1[...]

Concurrent Dual Band W ireless N600 Gigabit Router C opyrigh t Statemen t is the registered tr ademark of Shenzhen T enda T echnology Co ., Lt d. All the products and product names mentioned herein are the trademarks or register ed trademarks of their respective holders. Copyright of the whole pr oduc t as integration, including its accessories an [...]

Concurrent Dual Band W ireless N600 Gigabit Router T able of C ontents C OPY RIGHT ST A TEMENT ...............................................................................................2 CHAPTER 1 PRODUCT OVERVIEW ................................................................................4 1.1 W HA T IT DOES ..............................[...]

Concurrent Dual Band W ireless N600 Gigabit Router Chapter 1 Product Ov er view 1.1 What it does The T enda N60 Concurre nt Dual B and W ireless N600 Gigabit Router accommod ates users looking for extreme wireless performance. Deliv ering up to 300+300Mbps wir eless speed, it uses dual band technology to deliver 2.4GHz and 5GHz wireless signals sim[...]

Concurrent Dual Band W ireless N600 Gigabit Router 1.3 Package Contents Please unpack the bo x and check the follo wing items:  N60 Concurrent Dual Band Wir eless N600 Gigabit Router  P ower A dapter  Quick Installation Guide  CD-ROM  1-meter Ethernet cable If any of the above items are incorrect, missing, or damaged , ple ase contac[...]

Concurrent Dual Band W ireless N600 Gigabit Router Cha pter 2 H ardware 2.1 Panel Overview Fr ont Panel Power LED: A solid light indicates a proper connec tion to the power supply while a blinking light in dicat es system is func tioning correctly . WPS LED: A blinking light indicates router is performing WPS authentication on a client device. 5G L[...]

Concurrent Dual Band W ireless N600 Gigabit Router Back Panel W AN: Internet por t （ RJ-45 ） for connection to an Internet-enabled xDSL Modem/Cable Modem or existing Ethernet. IPTV ： IPT V port for connection to a network set-top box. How ever such port can function as a LAN por t if IPT V STB p ort is not enabled. LAN/1/2/3: 3 LAN por ts （[...]

Concurrent Dual Band W ireless N600 Gigabit Router 2 . Connect one of the LAN por ts on the Router to the NIC por t on your PC using an Ethernet cable. 3. Connect the Ethernet cable from Intern et side to the W AN port on the Ro uter . 8[...]

Concurrent Dual Band W ireless N600 Gigabit Router Chapter 3 L ogin to W eb Utility The device ’ s default IP is 192.168.0.1. Y o u can change it to accommodate your own needs. Her e in this manual, we use the default IP . Connect you PC to the router and conf ig your PC’ s T CP/IP settings following instructions in appendix 1 hereto . And then[...]

Concurrent Dual Band W ireless N600 Gigabit Router Login to web utility Launch a web browser on y our PC and enter http://192.168.0.1 as below . Then press “Ent er ” . Enter user name and passw ord in corresponding fields on window below (Default user name and password ar e respectively set to admin). Note: F or security purpose, please change [...]

Concurrent Dual Band W ireless N600 Gigabit Router Chapter 4 C onfigura tions This chapter delivers a detailed presenta tion of router ’ s func tionalities and featur es under 8 main menus below , allowi ng you to manage the router with ease. During operation, if y ou are not clear a bout a cer tain f eature, you can simply click the “Help ” [...]

Concurrent Dual Band W ireless N600 Gigabit Router Con nec t ed: Indicates that the router has been connected to your ISP .  Internet C onnec tion T ype: Displa ys current Internet connection t ype .  W AN IP: Displa ys W AN IP address.  Subnet Mask: Displays W AN subnet mask .  G ateway: Displays W AN gateway address.  DNS Ser v er:[...]

Concurrent Dual Band W ireless N600 Gigabit Router  W ireless Radio: Displays whether wireless is enabled or not.  Wireless MA C address: Displays MA C address of the router’ s wireless inter face.  SSID: Displays current SSID .  802.11 Mode: Displays curr ently active network mode.  Cou ntr y: Displays curr ent countr y .  Chan[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.2.1 LAN S ettings  IP Address: Router’ s LAN IP . The default is 192.168.0.1. Y ou can change it according t o your need.  Subnet Mask: Router ’ s LAN subnet mask . Note: 1. If you change the device’ s LAN IP a ddress, y ou must enter the new one in your browser to get back to the w e[...]

Concurrent Dual Band W ireless N600 Gigabit Router ¾ Internet c onnec tion T ype: Displa ys a list of avai lable Internet co nnection type s. ¾ MT U: Maximum T ransmission Unit. The default value is1500. Note: DO NO T change the fac tory default M TU value unless necessary as an improper MTU value ma y degrade your network pe rformance or even le[...]

Concurrent Dual Band W ireless N600 Gigabit Router  MT U: Maximum T ransmission Unit. The default value is1500. Note: DO NO T change the fac tory default M TU value unless necessary as an improper MTU value ma y degrade your network pe rformance or even lead to network malfunction. 3) PPP oE: Selec t PPP oE, if your ISP is using a PPP oE connect[...]

Concurrent Dual Band W ireless N600 Gigabit Router  Internet connection T ype: Displays a list of a vai lable I nternet connection type s.  PPTP Ser v er IP: Enter the IP address of a PPTP ser ver .  User name/Passwor d: Enter Username/P assword de fined by the PPTP server .  Address mode: Selec t “Dynamic ” if you don ’t get any [...]

Concurrent Dual Band W ireless N600 Gigabit Router  Internet connection T ype: Displays a list of a vai lable I nternet connection type s.  L2TP Ser v er IP Address: Enter the IP address of a L2TP ser ver .  User name/Passwor d: Enter Username/Passw ord specified by the L2TP ser ver .  Address Mode: Select “D ynamic” if you don ’t[...]

Concurrent Dual Band W ireless N600 Gigabit Router 6) PPPOE Dual Access  Internet connection T ype: Displays a list of a vai lable I nternet connection type s.  Username: Enter the PPPOE account provided by y our ISP .  Passw ord: Enter the PPPOE password pr ovided by your ISP .  Address mode: Select “D ynamic” if you don ’t get a[...]

Concurrent Dual Band W ireless N600 Gigabit Router  DHCP Ser v er-Enable: Check or uncheck the box to enable or disable the device ’ s DHCP ser ver f eature.  Start IP Address: Enter the star ting IP address for the DHCP server ’ s IP assignment.  End IP Address: Enter the ending IP address f or the DHCP ser ver’ s IP assignment. [...]

Concurrent Dual Band W ireless N600 Gigabit Router Static Assignment If you would like some devices on y our net w ork to always have fix ed IP addresses, you can use this fea ture and manually add a static DHCP assignment entr y f or each such device. F or example: T o have a PC at the M AC address of 00:15:58:c0:d4:3f alw ays receiv e the same IP[...]

Concurrent Dual Band W ireless N600 Gigabit Router  W AN MA C Address: Displays r outer's curren t W AN MA C address, you can manually change it.  Restore to F ac tory Default MAC: Click it to r estore router’ s W AN MA C to factory default value.  Clone MA C: Click to copy your PC’ s MAC to r outer ’ s W AN MAC Addr ess field. [...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.3 Security Settings “Security S ettings ” includes the following 5 submenus. Clicking any of them enters corr esponding inter face f or configuration. Below explains, in details , each such feat ure. 4.3.1 Group Settings “Group Settings” includes 2 submenus: Group Settings, User Group and[...]

Concurrent Dual Band W ireless N600 Gigabit Router 1. Enter R_D in group name field. 2. Enter R_D IP Range in group description field. 3. Enter “192.168.0.20” and “ 192.168.0.30” in IP fields. 4. Click “ Add “ and then the “Save “button; you will find such entr y in User Group list below: Tim e G ro up T o create a time gr oup , you[...]

Concurrent Dual Band W ireless N600 Gigabit Router 1. Enter “ W ork ing days” i n group name field . 2. Enter “working days ” in group description field. 3. Selec t the time and days . 4. Click “Save ” and you will find such entr y in Time Group list below : 4.3.2 P or t Filter T o better manage PCs in LAN , you can allow or disallow su[...]

Concurrent Dual Band W ireless N600 Gigabit Router  Filter Mode: Select Deny or Allow according to your own needs. Deny A ccess to Internet: Disallow specif ied packets to pass through the router; other packets are pr ocessed according to default rule. Allow Access to Internet: Allow specif ied packets to pass thr ough the router; other packets [...]

Concurrent Dual Band W ireless N600 Gigabit Router 9. Selec t “ Allow ” from the “Default ” drop- down list and check “Enable ” Port Filter featur e. 4.3.3 URL Filter T o better control LAN PCs, you can use th e URL filter function alit y to allow or disallow such PC to access cer tain webs ites within a specified time range. Click “ [...]

Concurrent Dual Band W ireless N600 Gigabit Router Filter Mode: Select Deny or Allo w according to your o wn needs. Deny Acc ess to Intern et: Disallow specified packets to pass thr ough the router; other packets are proc essed according to default rule. ¾ Allow Access to Internet: Allow specified packets to pass through the r outer; other packets[...]

Concurrent Dual Band W ireless N600 Gigabit Router 7. Click “Save” to display p age below: 8. Select “Allow” from the “Default” drop-down list and check the “Enable” URL Filter feature. 29[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.3.4 MA C Address Filter T o better manage PCs in LAN, you can use the MA C Address F ilter function to allow/disallow such PCs to access to Internet. Click “ Add” to display page below:  Filter Mode: Select Deny or Allow according to your own needs.  Deny Acc ess to Intern et: Disallow [...]

Concurrent Dual Band W ireless N600 Gigabit Router Click “Save ” to display the f ollowing page. Select “ Allow” from the “Default ” drop- down list and check the “Enab le MA C F ilter ” feature as below . 4.3.5 W AN Ac cess Control The W AN Access Contr ol feature allows users to configur e your router from Internet via a web brows[...]

Concurrent Dual Band W ireless N600 Gigabit Router Note: If you enter 0.0.0.0 in the IP address bo x, then all PC s on Internet can access your router’ s W e b-based utility to view o r change y our settings remotely once you enable the featur e. F or example: If you wa nt to allow only a PC at the IP address of 58.60.1 1 1.221 to access your rou[...]

Concurrent Dual Band W ireless N600 Gigabit Router Click “ Add” to display below page .  W AN P or t: Enter the W AN ser vice por t.  W ell-Known Service Ports: The “ W ell-Known Ser vice P or t” lists commonly used protocol ports such as DNS （ 53, FTP （ 21 ） , GOPHER(70), HT TP(80), NNTP(1190), POP3(110), PPTP(1723) , SMTP(25),[...]

Concurrent Dual Band W ireless N600 Gigabit Router Note: Setting W AN por t hereon to the same value as that on W AN access control section will deactivate the vir tual ser ver f eature. 4.4.2 DMZ Settings In some cases, we need to set a computer t o be completely exposed to extranet for implementation of a bidirectional communica tion. T o do so, [...]

Concurrent Dual Band W ireless N600 Gigabit Router  ID: Entr y ID .  Remote Host: Description of a remote host that receiv es/sends responses.  WA N P o r t : Port on router side.  LAN Hos t: Description of an internal host that receiv es/sends responses.  LAN Port: Port on host side.  Proto col: Indicates whether to per f orm T C[...]

Concurrent Dual Band W ireless N600 Gigabit Router  Enable DDNS: Check the box to Enable or Disable the DDNS f eature.  DDNS Service Provider : S elect your DDNS ser vice pr ovider from the drop- down menu (Dyndns or Noip).  Username: Enter the DDNS username r e gistered on DDNS ser ver .  Passw ord: Enter the DDNS password register ed [...]

Concurrent Dual Band W ireless N600 Gigabit Router  Destination Network: Enter a destination IP address .  Subnet Mask: Enter a Subnet M ask that corr esponds to the destination IP address y ou entered.  G ateway: Nex t-hop IP address . 4.4.6 Bandwidth C ontrol T o better manage bandwidth alloca tion and optimize network per f ormance, use[...]

Concurrent Dual Band W ireless N600 Gigabit Router  Enable: Check/uncheck to enable/disable current bandwidth entr y .  IP Range: Enter a single IP or an IP range.  Upstream Bandwidth Limit: Max total upload bandwidth f or a specified PC or a range of PCs.  Downstream Bandwidth Limit: Ma x total download bandwidth for a specified PC or [...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.5 W ireless S ettings Wir eless Settings includes 8 submenus as shown in the screenshot below . Clicking any tab enters corr esponding interface for configuration. 4.5.1 Basic Settings This section allows you to manage your wireless network (2.4G or 5G). Y ou can config country code, wireless net[...]

Concurrent Dual Band W ireless N600 Gigabit Router  SSID Broadcast: Selec t “Enable ”/“Disable ” to make your wireless network visible/ invisible to an y wireless clien ts within covera ge when they per form a scan they per form a scan to see what’ s available. When disabled, such wireless clients will hav e to first k now this SSID an[...]

Concurrent Dual Band W ireless N600 Gigabit Router  SSID Broadcast: Selec t “Disable ” to hide your SSID. When disabled, no wir eless clients will be able to see your wireless network when they per form a scan to see what’ s available. If they want to conne c t to y our router , they will have to first know this SSID an d then manually ent[...]

Concurrent Dual Band W ireless N600 Gigabit Router 1. OPEN/SHARED WEP is intended to pr ovide data confidentia lity comparable to that of a traditional wired network. T w o methods of authen tication can be used with WEP: Open System authentica tion and Shared Key authentication.  Security Mo de: Select a proper security mode from the drop- down[...]

Concurrent Dual Band W ireless N600 Gigabit Router 3. WP A2-PSK The later WP A2 protocol featur es complia nce with the full IEEE 802.11i standard and uses Advanced Encryption Standard (AES) in addition to TKIP encryption protocol to guarantee bett er security than that pr ovided by WEP or WP A.  Cipher T yp e: Select one cipher t ype from AES ([...]

Concurrent Dual Band W ireless N600 Gigabit Router Operation Instructions PBC: If you find the WPS LED blink ing for 2 minutes after you press the har dware WPS button on the device, it means that PBC encryption method is successfully enabled. And an authentication will be per f ormed between your router and the WPS/PBC-e nabled wireless client dev[...]

Concurrent Dual Band W ireless N600 Gigabit Router 1. If you already know N60-2’ s MAC addr ess, then you can manually enter it on N60-1 and click “Save ” . 2. Or you can use the Open Scan option. 1) Click the “Open Scan ” button to sear ch and selec t N60-2’ s SSID , confirm on the appearing dialogue box and then click “Sa ve ” . N[...]

Concurrent Dual Band W ireless N600 Gigabit Router 3. Repeat steps 1-2 on N60-2. After the 2 devices have added each other ’ s MA C address the WDS f eature can be implemented. Note: 1. WDS featur e can only be implemented between 2 wireless devices that both suppor t the WDS f eature. P lus, SSID , cha nnel, security setting s and security key m[...]

Concurrent Dual Band W ireless N600 Gigabit Router  Guest Netw ork: Check/uncheck to enable/disable the guest network fea ture.  SSID Broadcast: Selec t “Disable ” to hide your SSID. When disabled, no wir eless clients will be able to see your wireless network when they per form a scan to see what’ s available. If they want to conne c t[...]

Concurrent Dual Band W ireless N600 Gigabit Router  MA C Address Filter: Selec ting “Disable ” means to deac tivate the MA C address filter featur e. “ Allow ” means to only allow PCs at specified MA C addresses to connect to your wireless network while “Deny ” means to only block PCs at specified MA C addresses from connec ting to y[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.5.8 Wireless –A dvance Settings This section allows you to config advanced settings , including Beacon inter val ， F ragment threshold ， RTS threshold and D TIM int er val, etc , for both 2.4G and 5G wireless networks.  AP Isolation: Isolates client s connecting to the private SSID.  [...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.6 USB Applications The router provides a USB inter face, whic h can be connected to a printer or USB storage device for file sharing. 4.6.1 USB Storage  Enable: Check/uncheck to enable/disable file sharing feature.  Devic e Name: Define a meaningful name to you for the device.  Wo r k G [...]

Concurrent Dual Band W ireless N600 Gigabit Router 2. Set Access Right F irst selec t an account and click Disk. And then selec t a proper access right fr om below for each entry . R/W: Read and Write right. R: Read right. N: No right. At last click “Save ” to apply your settings. 3. Access shar ed file T o access resour ces on such storage dev[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.6.2 Printing Ser vice The USB printer ser vice allows you to connect a USB printer to the device and thus all clients on your network can print an yt hing they want on their PCs. T he device can identify a printer automatically as long as it is successfully connected.  Enable Printer : Check/u[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4. Click “Next ” . 5. Selec t “Local printer attached t o this computer ” and click “”Nex t. 53[...]

Concurrent Dual Band W ireless N600 Gigabit Router 6. Selec t “C reate a new port ” , T ype of port: “Standard TCP/IP P ort ” and click “Nex t ” . 7. Click “Next ” . 54[...]

Concurrent Dual Band W ireless N600 Gigabit Router 8. Enter device ’ s LAN IP address and click “Nex t” . 9. Click “Standard” under Device T ype and select “Generic Network Car d” , then click “Next ” . 55[...]

Concurrent Dual Band W ireless N600 Gigabit Router 10. Click “Finish ” . 11. Selec t “Hav e Disk ” . 56[...]

Concurrent Dual Band W ireless N600 Gigabit Router 12. Click “Browse ” , selec t corresponding drive file and click “Open ” . At last click “OK” . 13. Click “Next ” . 57[...]

Concurrent Dual Band W ireless N600 Gigabit Router 14. Define a name for the print er and click “Nex t” . 15. Click “Finish " . 58[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.7 IPTV S ettings The IPT V featur e makes it possible to enjoy online videos on your T V set via a set-top box while surfing I nternet. Enable IPT V : Check/uncheck to enable/dis able the IPT V featur e. Enable IPT V STB P ort: Check/uncheck to enable/disable the IPT V-specific por t. See below f[...]

Concurrent Dual Band W ireless N600 Gigabit Router Note: 1. If you enabled both options mentioned above , then note below : (a). Set IPT V connec tion type to DHCP/d ynamic IP or static IP (IMPORT ANT : Note that the IP address should be on the same IP net segment as router ’ s W AN IP .) if the set-top bo x is connec te d to any LAN port from 1-[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.8.1 Tim e S ettings This section assists you in setting the devi ce’ s system time; you can either select to set the time and date manually or automatically obtain the GMT time fr om Internet.  Sync with Inter net time ser vers: T ime and date will be updated automatically from Internet. [...]

Concurrent Dual Band W ireless N600 Gigabit Router T o update firmware , do as follows:  1. Click "Browse ” to locate the fi rmware and "Upgr ade ” to update.  2. Router will reboot automatically when upgrade completes . NOTE: Do not disconnec t the device from y our management PC (the PC you use to configure the device) or powe[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.8.4 Restore to F ac tory Default Settings T o restor e all settings to the device's fac tor y default values, click the "Restore to F ac tory Default ” button: F ac tory Default S ettings:  User Name: admin  Passw ord: admin  IP Address: 192.168.0.1  Subnet Mask: 255.255.2[...]

Concurrent Dual Band W ireless N600 Gigabit Router 4.8.6 Reboot This section allows you to r eboot the device. T o r estar t your device, click the “R eboot” button. 4.8.7 Statistics Statistics displays current traffic of PCs on y our LAN.  Enable T raffic Statistics: Check/uncheck the box to enable/disable the T raffic Statistics f eature. [...]

Concurrent Dual Band W ireless N600 Gigabit Router Note: Enabling the T raffic Statistics f eatur e may degrade router’ s packet processing capacity . So, do not enable it unless necessary . 4.8.8 Sy slog The Syslog option allows y ou to view all ev ents that occur u pon system star tup and check whether there is a tta ck present in your network.[...]

Concurrent Dual Band W ireless N600 Gigabit Router A ppendix 1 Config TCP/IP Settings on PC This section presents you how to config yo ur PC’ s TCP/IP settings (in W indows XP and Windo ws 7). Before y ou star t, make sure y our PC has an installed NIC. I f not, please install one first. Windo ws XP If you are using Windows XP ope rating system, [...]

Concurrent Dual Band W ireless N600 Gigabit Router 3. Selec t “Internet Protocol ( T CP/IP)” on the ap pearing window and click “Pr oper ties ” button. 4. Selec t “Use the f ollowing IP address ” or “Obtain an IP address automatically” . a. T o “Obtain an IP address automatically” simply click the corresponding butt on. 67[...]

Concurrent Dual Band W ireless N600 Gigabit Router b . “Use the following IP address ” IP address: Ent er 192. 168.0.xxx (xxx can be any value fr om 2~254). Subnet mask: Enter 255.255.255.0. Default gatewa y : Enter 192.168.0.1. Pr eferr ed DNS ser ver: Ent er 192.168.0.1 in case that you don ’t know the local DNS ser ver address ( Or contac [...]

Concurrent Dual Band W ireless N600 Gigabit Router 3. Selec t “Internet Pr otocol ( T CP/IP)” on the appearing window and click the “Pr oper ties ” button. 5. Selec t “Use the f ollowing IP address ” or “Obtain an IP address automatically” . a. T o “Obtain an IP address automatically” simply click the corresponding butt on. 69[...]

Concurrent Dual Band W ireless N600 Gigabit Router b . “Use the following IP address ” IP address: Ent er 192. 168.0.xxx (xxx can be any value fr om 2~254). Subnet mask: Enter 255.255.255.0. Default gatewa y : Enter 192.168.0.1. Pr eferr ed DNS ser ver: Ent er 192.168.0.1 in case that you don ’t know the local DNS ser ver address ( Or contac [...]

Concurrent Dual Band W ireless N600 Gigabit Router NC C Notice 經型式認證合格之低 功率射頻電機，非經許可，公司 、商號或使用者均不得擅自 變更頻率、加大功率或變 更設計之特性及功能。 低功率射頻電機之作 用不得影響飛航安全及幹擾合法 通信；經發現有幹擾現象時 ，應[...]

Concurrent Dual Band W ireless N600 Gigabit Router Radiation Exposure Sta tement This equipment complies with FC C radia tion exposure limits set f orth for an uncontrolled en vironment. This equipment should be installed and operated with minimum distance 20cm between the radiator & y our body . NO TE: (1)The manufac tur er is not responsible [...]