THOMSON VMD 6 Bedienungsanleitung

User manual VMD 6 35126120-vmd6-GB 1/08/00 14:24 Page Cov1[...]

EN INSTRUCTIONS DIGITAL VIDEO CAMERA VMD6 ENGLISH CONTENTS AUTOMA TIC DEMONSTRA TION 5 GETTING ST ARTED 6 – 13 RECORDING 14 – 30 Basic Recording For Video .................... 14 Basic Recording For Digital Still Camera (D.S.C.) ................ 17 Basic Recording For Video And D.S.C. ...... 1 8 Advanced Features For Video And D.S.C. ..........[...]

2 EN This camcorder is designed to be used with P AL-type colour television signals. It cannot be used for playback with a television of a different standard. However , live recording and LCD monitor/ viewfinder playback are possible anywhere. Use the BA T 600 battery packs and, to recharge them, the provided multi-voltage AC Power Adapter/Charger [...]

EN 3 Do not point the lens or the viewfinder directly into the sun. This can cause eye injuries, as well as lead to the malfunctioning of internal circuitry . There is also a risk of fire or electric shock. CAUTION! The following notes concern possible physical damage to the camcorder and to the user . When carrying, be sure to always securely atta[...]

4 EN PROVIDED ACCESSORIES • AC Power Adapter/ AC 600 • Remote Control Unit TC 200 M • DC Cord • CD-ROM The CD ROM contains the following 3 software programmes: • JLIP Video Capture • JLIP Video Producer • Picture Navigator • PC Connection Cable • Audio/Video Cable (ø3.5 mini-plug to RCA plug) • Editing Cable One plug has 3 ring[...]

EN 5 1 R S Z G T I D R E O O A A D E E C U O I L M C T N M N L N O A U M D Y U . M R O U M M E N D M P B O R E O E D A D R E E ME O N N U AUTOMA TIC DEMONSTRA TION Automatic Demonstration takes place when “DEMO. MODE” is set to “ON” (factory-preset).  A vailable when the Power Switch is set to “ ” or “ ” and no cassette is in the[...]

6 EN GETTING ST ARTED Power This camcorder ’ s 2-way power supply system lets you choose the most appropriate source of power . Do not use provided power supply units with other equipment. CHARGING THE BA TTERY P ACK 1 Make sure you unplug the camcorder ’ s DC cord from the AC Power Adapter/Charger . Plug the AC Adapter/ Charger ’ s power cor[...]

EN 7 1 3 2 T o DC Input connector T o DC OUT connector T o AC outlet AC Power Adapter/Charger DC cord A TTENTION: Before detaching the power source, make sure that the camcorder ’ s power is turned off. Failure to do so can result in a camcorder malfunction. USING THE BA TTERY P ACK 1 T ilt the viewfinder upward 1 . 2 With the arrow on the batter[...]

8 EN PAUSE 3 1 2 Grip Adjustment 1 Separate the V elcro strip. 2 Pass your right hand through the loop and grasp the grip. 3 Adjust so that your thumb and fingers can easily operate the Recording Start/Stop Button and Power Zoom Lever . Refasten the V elcro strip. Viewfinder Adjustment 1 Set the Power Switch to “ ” or “ ” while pressing dow[...]

EN 9 P L A Y O F F 4 FA D W W R O F F F E I I A F A A A R P P N F D D D / E E D E E E W – – O R R R I S S M – – – P C H W B M E R U H L O O T I A S L T T C A L E E K I R C 1 O D T C R N A I L D E T M O I T S E E C S U C / K P R R T C L N E I O A A E M D D Y N E E ME N 1 U . 1 1 2 . : 0 0 0 0 J. Date/Time Settings The date/time is recorded[...]

10 EN Loading/Unloading A Cassette The camcorder needs to be powered up to load or eject a cassette. 1 Slide and hold OPEN/EJECT in the direction of the arrow then pull the cassette holder cover open until it locks. The cassette holder opens automatically . • Do not touch internal components. 2 Insert or remove a tape and press “ PUSH HERE ” [...]

EN 11 MultiMediaCard Clipped edge Card Cover Loading A MultiMediaCard 1 Make sure the camcorder ’ s power is off. 2 Push the latch upward to open the card cover ( MEMORY CARD ). 3 Insert the MultiMediaCard clipped edge first, with the label facing up. • Do not touch the terminal on the reverse side of the label. 4 T o close the card cover , pus[...]

12 EN P L A Y O F F 1 Q R R U E E A C T L D U I S S R T E C N Y LE M C E T NU S F T I A N N E DARD 1 R S Z G T I D R E O O A A D E E C U O I L M C T N M N L N O A U M D Y U . M R O U M M E N D M P B O R E O E D A D R E E ME N S L U P P Picture Quality Mode Setting The Picture Quality mode can be selected to best match your needs. T wo Picture Quali[...]

EN 13 P L A Y O F F F. A U T O Operation Mode Choose the appropriate operation mode according to your preference using the Power Switch and VIDEO/DSC Switch. When the Power Switch is set to “ ”, “F . AUTO” appears. When set to “ ” or “ ”, there is no indication. T o turn on the camcorder , set the Power Switch to any operation mode [...]

14 EN 25 90 min 89 min 3 min 2 min 1 min 0 min min 180 ° 90 ° BR I G H T – + P L A Y O F F RECORDING Basic Recording For Video T ally lamp (lights while recording is in progress) Lock Button T ape remaining time indicator (Approximate) (Now calculating) (Blinking) (Blinking) (Blinking) Display MENU/ BRIGHT Wheel Power Switch PUSH OPEN Button NO[...]

EN 15 Self-Recording JOURNALISTIC SHOOTING In some situations, different shooting angles may provide more dramatic results. Hold the camcorder in the desired position and tilt the LCD monitor in the most convenient direction. It can rotate 270 ° (90 ° downward, 180 ° upward). NOTES: ● When you use the LCD monitor outdoors in direct sunlight, t[...]

16 EN P L A Y O F F FULL MULTI-9 Multi-Analyser 9 FRAME Snapshot mode with frame* FULL Snapshot mode with no frame* MULTI-4 Multi-Analyser 4 * There is the sound effect of a shutter closing. RECORDING Basic Recording For Video (cont.) Snapshot (For Video Recording) This feature lets you record still images that look like photographs onto a tape. SN[...]

EN 17 P L A Y O F F RECORDING Basic Recording For Digital Still Camera (D.S.C.) Basic Shooting (Snapshot) Y ou can use your camcorder as a Digital Still Camera for taking snapshots. NOTE: Y ou should already have performed the procedures listed below . If not, do so before continuing. ● Power (  pg. 6) ● Grip Adjustment (  pg. 8) ● V ie[...]

18 EN 10 x W T 1 x W T 10 x W T 20 x W T 40 x W T RECORDING Basic Recording For Video And D.S.C. Zoom in (T : T elephoto) Zoom out (W: W ide angle) Power Zoom Lever Zoom display FEA TURE: Zooming PURPOSE: T o produce the zoom in/out effect, or an instantaneous change in image magnification. OPERA TION: Zoom In Slide the Power Zoom Lever towards “[...]

EN 19 NOTE: Recording From The Middle Of A T ape Time Code During recording, a time code is recorded on the tape. This code is to confirm the location of the recorded scene on the tape during playback. If recording starts from a blank portion, the time code begins counting from “ 00:00:00 ” (minute:second:frame). If recording starts from the en[...]

20 EN RECORDING Basic Recording For Video And D.S.C. (cont.) DANGER  The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.  Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot f[...]

EN 21 While focusing on a nearer subject While focusing on a further subject FEA TURE: Auto Focus PURPOSE: The camcorder ’ s Full Range AF system offers continuous shooting ability from close-up (as close as approx. 5 cm to the subject) to infinity . However , correct focus may not be obtainable in the situations listed below (in these cases use [...]

22 EN END 1 R S Z G T I D R E O O A A D E E C U O I L M C T N M N L N O A U M D Y U . M R O U M M E N D M P B O R E O E D A D R E E MEN S L U P P 1 D T W W C R I E I I A E S L D N M M T E E D A U R N R M M C E U N A O U S A C D T E L R E T O ME O O N N F U F 1 O D T C R N A I L D E T M O I T S E E C S U C / K P R R T C L N E I O A A E M D D Y N E E[...]

EN 23 Menu Screen Explanations : Factory-preset Refer to “ Fade/W ipe Effects ” (  pg. 26, 27). Refer to “ Programme AE W ith Special Effects ” (  pg. 28). Refer to “ Exposure Control ” and “ Iris Lock ” (  pg. 29). Refer to “ White Balance Adjustment ” and “ Manual White Balance Operation ” (  pg. 3 0). Allows y[...]

24 EN : Factory-preset Menu Screen Explanations (cont.) DIS TELE MACR O Demonstrates certain functions such as Programme AE with special effects, etc., and can be used to confirm how these functions operate. When “ DEMO. MODE ” is set to “ ON ” and the Menu Screen is closed, demonstration starts. Performing any operation during the demonstr[...]

EN 25 NOTES: ● The “ MANUAL MENU ” settings are effective only when the Power Switch is set to “ ” . ● “ DISPLA Y MENU ” functions which are set when the Power Switch is set to “ ” are also applied when the Power Switch is set to “ ” (  pg. 32). “ CLOCK ADJ. ” only appears when the Power Switch is set to “ ” . ●[...]

26 EN Fade/Wipe Effects These effects let you make pro-style scene transitions. Use them to spice up the transition from one scene to the next. Y ou can also vary transitions from scene to scene. IMPORT ANT: Some Fade/W ipe Effects cannot be used with certain modes of Programme AE with special effects (  pg. 28). If an unusable Fade/W ipe Effect[...]

EN 27 Fader And Wipe Menu Menu Effect Fade in or out with a white screen. Fade in or out with a black screen. Fade in or out with a full-screen mosaic effect. Fade in to a colour screen from a black and white screen, or fade out from colour to black and white. Wipe in on a black screen from the upper right to the lower left corner , or wipe out fro[...]

28 EN 1/50 1/100 1/250 1/50 1/100 1/250 4 P . A S S V S S S E L L I O H H H / O O D F U U U E W W E F T T T F O T T T F 1 E E E E 4 0 E R R R C x x C T HO RECORDING Advanced Features For Video And D.S.C. (cont.) Programme AE With Special Effects 1 Set the Power Switch to “ ” while pressing down the Lock Button located on the switch. 2 Press MEN[...]

EN 29 EX 0 P. Exposure Control Manual exposure adjustment is recommended in the following situations: • When shooting using reverse lighting or when the background is too bright. • When shooting on a reflective natural background such as at the beach or when skiing. • When the background is overly dark or the subject light. 1 Set the Power Sw[...]

30 EN White Balance Adjustment A term that refers to the correctness of colour reproduction under various lighting. If the white balance is correct, all other colours will be accu- rately reproduced. The white balance is usually adjusted automatically . However , more advanced camcorder operators control this function manually to achieve a more pro[...]

EN 31 PLA YBACK Basic Playback For Video P L A Y O F F Power Switch Rewind Button ( 2 ) Fast-Forward Button ( 3 ) Play/Pause Button ( 4 / 6 ) Stop Button ( 5 ) 1 Load a tape (  pg. 10). 2 Set the VIDEO/DSC Switch to “ VIDEO ” , then set the Power Switch to “ ” while pressing down the Lock Button located on the switch. T o start playback,[...]

32 EN P L A Y O F F 1 S 1 S R R O 2 Y E E U B N C V T N I C I U D T H M D R R O E N M M O D C O O O E O D D P M E E Y ENU S S S T O O E U U R N N E D D O L R 1 O D T R N A I D E T M I T S E E S U C / P R R T C L N E I O A E M D Y N E E M EN O O U N FF Using Menus For Detailed Adjustment The following procedure applies to all except Synchro Comp ( ?[...]

EN 33 12 BI T / SOUND 1 SP 4 25. 1 1 2 7 . : 0 3 0 0 TC 12 : 34 : 24 Playback Sound During playback, the camcorder detects the sound mode in which the recording was made, and plays the sound back. Select the type of sound to accompany your playback picture. According to the menu access explanation on pg. 32, select “ SOUND MODE ” or “ 12BIT M[...]

34 EN P L A Y O F F 13 / 50 100 – 0013 12 / 50 100 – 0012 11 / 50 100 – 0011 10 / 50 100 – 0010 Power Switch Lock Button Normal Playback Images shot with the camcorder are automatically numbered, then stored in numerical order in the MultiMediaCard. Y ou can view the stored images, one at a time, much like flipping through a photo album. 1 [...]

EN 35 P L A Y O F F 1 I S P D F R N L R E O E D I O L R T E D T E M D U X E E T A S R C E T C N S T H M O E W NU 001 F 002 S 003 S 005 F 004 F EXIT 006 F < INDEX > Lock Button Power Switch Menu Screen INDEX Screen The images you shot can be displayed together with their index information. Convenient for checking images shot beforehand, the IN[...]

36 EN Slide Show Y ou can run through all the images stored in memory automatically in numerical order . 1 Set the VIDEO/DSC Switch to “ ” , then set the Power Switch to “ ” , while pressing down the Lock Button. 2 Press MENU/BRIGHT . The Menu Screen appears. 3 Rotate MENU/BRIGHT to select “ ” and press it. “ DSC MENU ” appears. 4 R[...]

EN 37 1 I S P D F R N L R E O E D I O L R T E D T E M D U X E E T A S R C E T C N S T H M O E W NU P L A Y O F F 001 F 002 S 003 S 005 F 004 F EXIT 006 F < PROTECT > 001 F 002 S 003 S 005 F 004 F EXIT 006 F < PROTECT > Display Power Switch MENU/BRIGHT Wheel Lock Button If Protection is removed PROTECT Index Screen Normal playback Padloc[...]

38 EN C E A X N E C C D E U S L T C E ME NU P L A Y O F F 001 F X 002 S X 003 S 005 F 004 F EXIT 006 F < DELETE > Deleting Images Previously shot images can be deleted either one at a time or all at once. 1 Set the VIDEO/DSC Switch to “ ” , then set the Power Switch to “ ” while pressing down the Lock Button. • A stored image is dis[...]

EN 39 P L A Y O F F 1 I S P D F R N L R E O E D I O L R T E D T E M D U X E E T A S R C E T C N S T H M O E W NU C E A X N E C C E U L TE MENU/BRIGHT Wheel Lock Button Power Switch Display Initialising A MultiMediaCard Y ou can initialise a MultiMediaCard anytime. After initialising, all images and data stored in the MultiMediaCard, including those[...]

40 EN CONNECTIONS Basic Connections These are some basic types of connections. When making the connections, refer also to your VCR and TV instruction manuals. TV VCR Audio/Video cable [mini-plug to RCA plug] (provided) Y ellow to VIDEO White to AUDIO L IN** Red to AUDIO R IN** T o TV or VCR Set to CVBS Cable Adapter (provided) A. Connection to a TV[...]

EN 41 1 Make sure all units are turned off. 2 Connect the camcorder to a TV or VCR as shown in the illustration (  pg. 40). If using a VCR . . . go to step 3. If not . . . go to step 4. 3 Connect the VCR output to the TV input, referring to your VCR’ s instruction manual. 4 T urn on the camcorder , the VCR and the TV . 5 Set the VCR to its AUX[...]

42 EN CONNECTIONS Advanced Connections T o DV IN/OUT To RS-232C DV cable** To D V connector PC connection cable (provided) To P C (DIGIT AL PHOTO) Power Switch PC with DV connector-equipped capture board PC Connector cover* Core filter * When connecting the cable, open this cover . ** Use the DV cable provided with the capture board. VMD6 EN(40/80)[...]

EN 43 Connection T o A Personal Computer This camcorder can transfer still images to a PC by using the provided software when connected as shown in the illustration. It is also possible to transfer still images to a PC with a DV connector -equipped capture board installed. 1 Make sure the camcorder and PC are turned off. 2 Connect the camcorder to [...]

44 EN DUBBING Dubbing T o A VCR 1 Following the illustration, connect the camcorder and the VCR. Also refer to pg. 40 and 41. 2 Set the VIDEO/DSC Switch to “ VIDEO ” , then set the camcorder ’ s Power Switch to “ ” while pressing down the Lock Button located on the switch, turn on the VCR ’ s power , and insert the appropriate cassettes[...]

EN 45 DV cable Video unit equipped with DV connector To D V IN/OUT To DV IN/OUT Power Switch Core filter Connector cover* Dubbing T o Or From A Video Unit Equipped With A DV Connector (Digital Dubbing) It is also possible to copy recorded scenes from the camcorder onto another video unit equipped with a DV connector . Since a digital signal is sent[...]

46 EN P L A Y O F F T P O US C H OP S Y TA T R O T/ T S A T P O E P R 4 E 4 C 4 Power Switch Rewind Button ( 2 ) Fast-Forward Button ( 3 ) Lock Button Dubbing Images Stored In A MultiMediaCard T o A T ape Images can be dubbed from a MultiMediaCard to a tape. 1 Load a MultiMediaCard (  pg. 1 1) and cassette (  pg. 10). 2 T o locate the point w[...]

EN 47 SP 6 1 S 1 S R R O 2 Y E E U B N C V T N I C I U D T H M D R R O E N M M O D C O O O E O D D P M E E Y EN O U N P L A Y O F F Play/Pause Button ( 4 / 6 ) Display Power Switch SNAPSHOT Button Lock Button Dubbing Images Recorded On A T ape T o A MultiMediaCard Images can be dubbed from a tape to a MultiMediaCard. 1 Load a MultiMediaCard (  p[...]

48 EN 5m 30 ° 30 ° 1 3 2 + – + – The Full-Function Remote Control Unit can operate this camcorder from a distance as well as the basic operations (Playback, Stop, Pause, Fast-Forward and Rewind) of your VCR. It also makes additional playback functions possible. Installing The Batteries The remote control uses two “ AAA (R03) ” size batter[...]

EN 49 10 ) @ $ ! # % ^ & * ( 2 3 4 6 8 5 7 9 Buttons 1 Infrared beam transmitting window 2 Zoom (T/W) Buttons 3 DISPLA Y Button 4 SHIFT Button 5 SLOW Rewind/Forward Buttons Left/Right Buttons 6 REW Button 7 FADE/WIPE Button 8 EFFECT ON/OFF Button 9 EFFECT Button 0 P AUSE IN Connector ! ST ART/STOP Button @ MBR SET Button # SNAPSHOT Button $ Up [...]

50 EN USING THE REMOTE CONTROL UNIT (cont.) SHIFT P AUSE PLA Y STOP Press T Normal playback Left or SLOW Rewind Button T o move image, press (Right) while keeping SHIFT held down. Zoom Buttons Remote sensor Right or SLOW Forward Button Up Button Down Button FEA TURE: Slow-Motion Playback PURPOSE: T o allow slow-speed search in either direction duri[...]

EN 51 P 4 L O A F 1 2 3 4 5 Y F BACK C M S S V L O E T I E A N P R D F S O I O E F S T A B O E I O E C C N E T E C F H I O LM EFFECT PLA Y EFFECT ON/OFF PLA YBACK EFFECT Select Menu Remote sensor FEA TURE: Playback Special Effects PURPOSE: T o allow you to add creative effects to the video playback image. OPERA TION: 1) T o start playback, press PL[...]

52 EN USING THE REMOTE CONTROL UNIT (cont.) VCR CODE LIST 6 2 6 4 7 7 MITSUBISHI 6 7 6 8 NEC 3 7 3 8 GRUNDIG 1 4 3 4 HITACHI 6 6 6 3 PANASONIC 1 3 1 7 1 1 9 4 1 8 JVC 9 1 9 6 9 3 BLAUPUNKT AKAI 9 7 9 8 3 2 FERGUSON 1 3 A B C VCR BRAND NAME BUTTONS (A) (B) SANYO 3 6 3 5 SHARP 1 5 1 ` TOSHIBA 6 9 6 1[...]

EN 53 DISPLA Y MAKE CONNECTIONS Also refer to pg. 40 and 41. 1 A THOMSON VCR equipped with a remote pause connector . . . ... connect the editing cable to the Remote P AUSE connector . A THOMSON VCR not equipped with a remote pause connector but equipped with an R.A. EDIT connector . . . ... connect the editing cable to the R.A.EDIT connector . A V[...]

54 EN USING THE REMOTE CONTROL UNIT (cont.) 1 2 3 4 5 6 7 8 — — T T I O M T — E A I — L N : C — O — D ~ ~ ~ ~ ~ ~ ~ ~ E O — 0 U — 0 T : : — 0 — 0 M OD E PLA Y R.A.EDIT ON/OFF EFFECT FADE/WIPE EDIT IN/OUT CANCEL SELECT SCENES 4 Point the remote control at the camcorder ’ s remote sensor . Press PLA Y ( 4 ) and then press R.A.ED[...]

EN 55 1 2 3 4 5 6 7 8 — — — — T T I O M T 0 0 0 0 1 — E A I 0 7 3 9 5 — L N : : : : : : C 2 1 3 3 5 — O 5 8 3 0 5 — D ~ ~ ~ ~ ~ ~ ~ ~ E O 0 0 0 1 1 1 U 2 8 5 3 6 6 9 T : : : : : : : 0 3 5 1 2 3 3 5 1 3 5 0 0 9 M — — O — — DE — — — — — — STOP P AUSE R.A.EDIT ON/OFF VCR REC STBY FADE/WIPE EFFECT EDIT IN/OUT CANCEL [...]

56 EN USING THE REMOTE CONTROL UNIT (cont.) 1 2 3 4 5 6 7 8 — — T T I O M T — E A I — L N : C — O — D ~ ~ ~ ~ ~ ~ ~ ~ E O — 0 U — 0 T : : — 0 — 0 M OD E R.A.EDIT ON/OFF For More Accurate Editing Some VCRs make the transition from Record-Pause to Record mode faster than others. Even if you begin editing for the camcorder and the [...]

EN 57 R.A.EDIT ON/OFF 1 S 1 S R R O 2 Y E E U B N C V T N I C I U D T H M D R R O E N M M O D C O O O E O D D P M E E Y ENU + 1 . 0 ADJUSTMENT OF VCR/CAMCORDER TIMING 4 Point the remote control at the camcorder ’ s remote sensor and press R.A.EDIT ON/OFF to make the Random Assemble Editing menu disappear , then press MENU/BRIGHT . The Menu Screen[...]

58 EN 6e P AUSE A.DUB STOP PLA Y Audio Dubbing The audio track can be customized only when recorded in the 12-bit mode (  pg. 23). NOTES: ● Audio Dubbing is not possible on a tape recorded in 16-bit audio, on a tape recorded in the LP mode or on a blank portion of a tape. ● T o perform Audio Dubbing while watching on the television, make con[...]

EN 59 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION TROUBLESHOOTING 1. No power is supplied. 2. “ SET DA TE/TIME! ” appears. 3. Recording cannot be performed. 4. There is no picture. 5. Some functions are not available using MENU/ BRIGHT . 6. The focus does not adjust automatically . 1. • The power is not connected properly . • The battery is d[...]

60 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 7. The cassette will not load properly . 8. The MultiMediaCard will not load properly . 9. Snapshot mode cannot be used. 10. The colour of Snapshot looks strange. 11 . The image taken using Snapshot is too dark. 12. Digital Zoom does not work. 13. Programme AE with special effe[...]

EN 61 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 16. The Picture W ipe and Dissolve functions do not work. 17. The picture wipe function does not work. 18. Scene transition does not go as expected. 19. The V ideo Echo mode does not work. 20. Even when Slow Shutter is not selected, the image looks like it is activated. 21. There is no strobe when the[...]

62 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 22. White Balance cannot be activated. 23. When shooting a subject illuminated by bright light, vertical lines appear . 24. When the screen is under direct sunlight during shooting, the screen becomes red or black for an instant. 25. During recording, the date/ time does not ap[...]

EN 63 SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 31. • Certain Fade/W ipe effects, certain modes of Programme AE with special effects, “ DIS ” and other functions that cannot be used together are selected at the same time. 32. • The LCD monitor an d the viewfinder are made with high-precision technology . However , black spots or bright spot[...]

64 EN TROUBLESHOOTING (cont.) SYMPTOM POSSIBLE CAUSES CORRECTIVE ACTION 40. The LCD monitor , the viewfinder and the lens have become dirty (ex. fingerprints). 41. An unusual mark appears. 42. An error indication (E01 — E06) appears. 43. The charger indicator on the AC Power Adapter/ Charger does not light. 44. Picture does not appear on the LCD [...]

EN 65 2 1 USER MAINTENANCE Cassette holder cover OPEN/EJECT Switch PUSH HERE Cassette holder Cover Cleaning The Camcorder 1 T o clean the exterior , wipe gently with a soft cloth. Put the cloth in diluted mild soap and wring it well to wipe off heavy dirt. Then wipe again with a dry cloth. 2 Press PUSH OPEN and open the LCD monitor . W ipe gently w[...]

66 EN INDEX Controls, Connectors And Indicators P L A Y O F F 1 r p o u i w q e 3 4 5 6 7 8 W y $ % # Y R U I T E & ^ * ( ) ! @ 9 0 Q 2 VMD6 EN(40/80) 28/08/00, 16:08 66[...]

EN 67 Controls 1 Monitor Open Button [PUSH OPEN] .....................................  pg. 14 2 Dioptre Adjustment Control ...................  pg. 8 3 Battery Release Button [BA TTERY RELEASE] ..............................  pg. 7 4 • MENU Wheel [+, – , PUSH] ...............  pg. 22 • LCD Monitor BRIGHT (Brightness) Control [+, [...]

68 EN INDEX Indications LCD Monitor/Viewfinder Indications During Video Recording Only 1 Displays the selected Fade/W ipe effect. (  pg. 26, 27) 2 Appears when in the Squeeze or Cinema mode. (  pg. 24) 3 * Displays the recording mode (SP or LP). (  pg. 12) 4 * Displays the tape remaining time. (  pg. 14) 5 * •“ REC ” appears durin[...]

EN 69 LCD Monitor/Viewfinder Indications During Both Video And D.S.C. Recording F. 2 AU P T H O 4 O B 0 T R x O I W GH T – T 1 + . 1 1 2 . : 0 0 0 0 1 * 2 4 6 7 3 5 8 ! 0 @ * # 9 1 * Appears when the power switch is set to “ ” . (  pg. 13) 2 Appears when backlight compensation is used. (  pg. 29) 3 Appears when the white balance is adju[...]

70 EN INDEX Indications (cont.) LCD Monitor/Viewfinder Indications During Video Playback 1 Displays the sound mode. (  pg. 32, 33) 2 Displays the tape speed. (  pg. 12) 3 Appears while a tape is running. 4 : Playback 3 : Fast-Forward/Shuttle search 2 : Rewind/Shuttle search 6 : Pause 6 4 : Forward slow-motion 1 6 : Reverse slow-motion e : Aud[...]

EN 71 Indications Function Displays the battery remaining power . Remaining power level: high Remaining power level: exhausted As the battery power comes close to nil, the battery indicator blinks. When the battery power is exhausted, power turns off automatically . Appears when no tape is loaded. (  pg. 10) Appears when the erase protection tab[...]

72 EN INDEX Indications (cont.) Indications Function ● Appears if dubbing of copyguarded signals is attempted while this camcorder is being used as a recorder . (  pg. 45) ● Appears in the following cases when dubbing from a tape to a MultiMediaCard: – when no MultiMediaCard is loaded. – when the MultiMediaCard's memory is full. –[...]

EN 73 Video Light DANGER  The video light can become extremely hot. Do not touch it either while in operation or soon after turning it off, otherwise serious injury may result.  Do not place the camcorder into the carrying case immediately after using the video light, since it remains extremely hot for some time.  When operating, keep a di[...]

74 EN CAUTIONS (cont.) Cassettes T o properly use and store your cassettes, be sure to read the following cautions: 1. During use . . . .... make sure the cassette bears the Mini DV mark. .... be aware that recording onto prerecorded tapes automatically erases the previously recorded video and audio signals. .... make sure the cassette is positione[...]

EN 75 Serious malfunctioning If malfunctioning occurs, stop using the unit immediately and consult your local THOMSON dealer . The camcorder is a microcomputer -controlled device. External noise and interference (from a TV , a radio, etc.) might prevent it from function- ing properly . In such cases, first disconnect its power supply unit (battery [...]

76 EN TERMS F Fade-In/Out ........................................  pg. 26, 27 Fast-Forward The T ape ..............................  pg. 31 Frame-By-Frame Playback ..................  pg. 31, 50 G Gain Up ...................................................  pg. 23 Grip Adjustment .........................................  pg. 8 I Ic[...]

EN 77 P Picture Quality Mode ...............................  pg. 12 Picture W ipe/Dissolve .........................  pg. 26, 27 Playback Special Effects ............................  pg. 51 Playback Zoom ........................................  pg. 50 Power Switch Position ..............................  pg. 13 Programme AE W ith [...]

78 EN SPECIFICA TIONS Camcorder For General Power supply : DC 6.3 V (Using AC Power Adapter/Char ger) DC 7.2 V (Using battery pack) Power consumption LCD monitor off, viewfinder on : Approx. 4.3 W LCD monitor on, viewfinder off : Approx. 5.3 W V ideo light : Approx. 3.5 W Dimensions (W x H x D) : 80 mm x 96 mm x 170 mm (with the LCD monitor closed [...]

EN 79 For Digital Still Camera Storage media : MultiMediaCard Compression system : JPEG (compatible) File size : VGA: 640 x 480 pixels Picture quality : 2 modes (FINE/ST ANDARD) Approximate number of storable images (with an optional MultiMediaCard [8 MB]) FINE : 100 ST ANDARD : 200 (with the provided MultiMediaCard [16 MB]) FINE : 200 ST ANDARD : [...]

80 EN NOTES VMD6 EN(40/80) 28/08/00, 16:09 80[...]

THOMSON MUL TIMEDIA 46 quai A. Le Gallo 92648 Boulogne Cedex France RCS NANTERRE B 322 019 464 http://www .thomson-multimedia.com 35126120 L YT0665-001A © Copyright THOMSON multimedia 2000 DAE Communication - 95000 Cergy 35126120-vmd6-GB 1/08/00 14:24 Page Cov2[...]